-
Superconducting Coherence Peak in Near-Field Radiative Heat Transfer
Authors:
Wenbo Sun,
Zhuomin M. Zhang,
Zubin Jacob
Abstract:
Enhancement and peaks in near-field radiative heat transfer (NFRHT) typically arise due to surface phonon-polaritons, plasmon-polaritons, and electromagnetic (EM) modes in structured materials. However, the role of material quantum coherence in enhancing near-field radiative heat transfer remains unexplored. Here, we unravel that NFRHT in superconductor-ferromagnetic systems displays a unique peak…
▽ More
Enhancement and peaks in near-field radiative heat transfer (NFRHT) typically arise due to surface phonon-polaritons, plasmon-polaritons, and electromagnetic (EM) modes in structured materials. However, the role of material quantum coherence in enhancing near-field radiative heat transfer remains unexplored. Here, we unravel that NFRHT in superconductor-ferromagnetic systems displays a unique peak at the superconducting phase transition that originates from the quantum coherence of Bogoliubov quasiparticles in superconductors. Our theory takes into account evanescent EM radiation emanating from fluctuating currents comprising Cooper pairs and Bogoliubov quasiparticles in stark contrast to the current-current correlations induced by electrons in conventional materials. Our proposed NFRHT configuration exploits ferromagnetic resonance at frequencies deep inside the superconducting band gap to isolate this superconducting coherence peak. Furthermore, we reveal that Cooper pairs and Bogoliubov quasiparticles have opposite effects on near-field thermal radiation and isolate their effects on many-body radiative heat transfer near superconductors. Our proposed phenomenon can have applications for developing thermal isolators and heat sinks in superconducting circuits.
△ Less
Submitted 8 March, 2025;
originally announced March 2025.
-
Optimization of highly circularly polarized thermal radiation in $α$-MoO$_3$/$β$-Ga$_2$O$_3$ twisted layers
Authors:
Marco Centini,
Chiyu Yang,
Maria Cristina Larciprete,
Mauro Antezza,
Zhuomin M. Zhang
Abstract:
We investigate a bi-layer scheme for circularly polarized infrared thermal radiation. Our approach takes advantage of the strong anisotropy of low-symmetry materials such as $β$-Ga$_2$O$_3$ and $α$-MoO$_3$. We numerically report narrow-band, high degree of circular polarization (over 0.85), thermal radiation at two typical emission frequencies related to the excitation of $β$-Ga$_2$O$_3$ optical p…
▽ More
We investigate a bi-layer scheme for circularly polarized infrared thermal radiation. Our approach takes advantage of the strong anisotropy of low-symmetry materials such as $β$-Ga$_2$O$_3$ and $α$-MoO$_3$. We numerically report narrow-band, high degree of circular polarization (over 0.85), thermal radiation at two typical emission frequencies related to the excitation of $β$-Ga$_2$O$_3$ optical phonons. Optimization of the degree of circular polarization is achieved by a proper relative tilt of the crystal axes between the two layers. Our simple but effective scheme could set the basis for a new class of lithography-free thermal sources for IR bio-sensing.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
Large-area polycrystalline $α$-MoO3 thin films for IR photonics
Authors:
Maria Cristina Larciprete,
Daniele Ceneda,
Chiyu Yang,
Sina Abedini Dereshgi,
Federico Vittorio Lupo,
Maria Pia Casaletto,
Roberto Macaluso,
Mauro Antezza,
Zhuomin M. Zhang,
Marco Centini,
Koray Aydin
Abstract:
In recent years, excitation of surface phonon polaritons (SPhPs) in van der Waals materials received wide attention from the nanophotonics community. Alpha-phase Molybdenum trioxide ($α$-MoO3), a naturally occurring biaxial hyperbolic crystal, emerged as a promising polaritonic material due to its ability to support SPhPs for three orthogonal directions at different wavelength bands (range 10-20…
▽ More
In recent years, excitation of surface phonon polaritons (SPhPs) in van der Waals materials received wide attention from the nanophotonics community. Alpha-phase Molybdenum trioxide ($α$-MoO3), a naturally occurring biaxial hyperbolic crystal, emerged as a promising polaritonic material due to its ability to support SPhPs for three orthogonal directions at different wavelength bands (range 10-20 $μ$m). Here, we report on the fabrication and IR characterization of large-area (over 1 cm$^2$ size) $α$-MoO3 polycrystalline films deposited on fused silica substrates by pulsed laser deposition. Single alpha-phase MoO3 films exhibiting a polarization-dependent reflection peak at 1006 cm$^{-1}$ with a resonance Q-factor as high as 53 were achieved. Reflection can be tuned via changing incident polarization with a dynamic range of $Δ$R=0.3 at 45 deg. incidence angle. We also report a polarization-independent almost perfect absorption condition (R<0.01) at 972 cm$^{-1}$ which is preserved for a broad angle of incidence. The development of a low-cost polaritonic platform with high-Q resonances in the mid-infrared (mid-IR) range is crucial for a wide number of functionalities including sensors, filters, thermal emitters, and label-free biochemical sensing devices. In this framework our findings appear extremely promising for the further development of lithography-free, scalable films, for efficient and large-scale devices operating in the free space, using far-field detection setups.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Polarimetric analysis of thermal emission from both reciprocal and nonreciprocal materials using fluctuational electrodynamics
Authors:
Chiyu Yang,
Wenshan Cai,
Zhuomin M. Zhang
Abstract:
Coherent thermal emission for a given polarization has been observed in many metamaterials with micro/nanostructures. A complete description of the thermal emission requires the full characterization of the spectral angular emissivity for all polarization states. Emissivity is typically obtained based on the equivalence between the absorptivity and emissivity according to Kirchhoff's law; however,…
▽ More
Coherent thermal emission for a given polarization has been observed in many metamaterials with micro/nanostructures. A complete description of the thermal emission requires the full characterization of the spectral angular emissivity for all polarization states. Emissivity is typically obtained based on the equivalence between the absorptivity and emissivity according to Kirchhoff's law; however, such relation may be invalid for nonreciprocal media. More general approaches without the constrain of optical reciprocity are necessary when dealing with magneto-optical materials and magnetic Weyl semimetals. Here, a polarimetric analysis of thermal emission is carried out based on fluctuational electrodynamics. The Stokes parameters are obtained using coherency matrix for a multilayered system with anisotropic media, including nonreciprocal materials. The results demonstrate that thermal emission may be circularly or linearly polarized in different directions and frequencies. The findings are consistent with the statements of the modified Kirchhoff's law provided by several groups in recent years, and therefore, justify the appropriateness of both the direct and indirect methods. This study will help the design of desired thermal emitters for energy harvesting and thermal control.
△ Less
Submitted 10 September, 2022;
originally announced September 2022.
-
Spatial and doping effects on radiative recombination in thin-film near-field photonic energy converters
Authors:
Dudong Feng,
Shannon K. Yee,
Zhuomin M. Zhang
Abstract:
Modeling radiative recombination is crucial to the analysis of photonic energy converters. In this work, a local radiative recombination coefficient is defined and derived based on fluctuational electrodynamics that is applicable to thin-film cells in both the near field and far field. The predicted radiative recombination coefficient of an InAs cell deviates from the van Roosbroeck-Shockley relat…
▽ More
Modeling radiative recombination is crucial to the analysis of photonic energy converters. In this work, a local radiative recombination coefficient is defined and derived based on fluctuational electrodynamics that is applicable to thin-film cells in both the near field and far field. The predicted radiative recombination coefficient of an InAs cell deviates from the van Roosbroeck-Shockley relation when the thickness is less than 10 um and the difference exceeds fourfold with a 10 nm film. The local radiative recombination coefficient is orders of magnitude higher when an InAs cell is configured in the near field. The local radiative recombination coefficient reduces as the doping level approaches that of a degenerate semiconductor. The maximum output power and efficiency of a thermoradiative cell would be apparently overpredicted if the luminescence coefficient (defined in this letter) were taken as unity for heavily doped semiconductors.
△ Less
Submitted 19 June, 2022; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Observation of high efficiency Betatron radiation from femtosecond petawatt laser irradiated near critical plasmas
Authors:
J. H. Tan,
Y. F. Li,
D. Z. Li,
J. Feng,
Y. J. Li,
W. J. Zhou,
Y. H. Yan,
Z. M. Zhang,
B. L. Zhang,
J. G. Wang,
Y. Q. Gu,
Y. T. Li,
L. M. Chen
Abstract:
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and em…
▽ More
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and emit x-rays when oscillating in the laser field. The deduced energy conversion efficiency from laser to x-rays is up to 1e-4, orders of magnitude higher than other betatron regimes. Enhancement of acceleration and radiation with sharp plasma density boundary is also obtained and further interpretated with 2D particle-in-cell simulations.
△ Less
Submitted 25 September, 2021;
originally announced September 2021.
-
A Novel Near-field Photonic Thermal Diode with hBN and InSb
Authors:
Dudong Feng,
Shannon K. Yee,
Zhuomin M. Zhang
Abstract:
Similar to the diode in electronics, a thermal diode is a two-terminal device that allows heat to transfer easier in one direction (forward bias) than in the opposite direction (reverse bias). Unlike conductive and convective thermal diodes, a photonic thermal diode operates in a contactless mode and may afford a large operating temperature range. In this work, a novel near-field photonic thermal…
▽ More
Similar to the diode in electronics, a thermal diode is a two-terminal device that allows heat to transfer easier in one direction (forward bias) than in the opposite direction (reverse bias). Unlike conductive and convective thermal diodes, a photonic thermal diode operates in a contactless mode and may afford a large operating temperature range. In this work, a novel near-field photonic thermal diode with hexagonal boron nitride (hBN) and indium antimonide (InSb) is proposed and theoretically demonstrated. The temperature dependence of the interband absorption of InSb is used to couple (or decouple) with the hyperbolic phonon polaritons in hBN. The numerical analysis predicts a rectification ratio greater than 17 for a 10 nm vacuum gap when operating at an average temperature of 300 K and a temperature difference of 200 K. The calculated rectification ratio exceeds 35 with higher average temperatures and larger temperature differences. The mechanism proposed here for achieving photonic thermal rectification provides a new way of controlling radiative heat transfer.
△ Less
Submitted 12 August, 2021;
originally announced August 2021.
-
Improved performance of a near-field thermophotovoltaic system by a back gapped reflector
Authors:
Dudong Feng,
Shannon K. Yee,
Zhuomin M. Zhang
Abstract:
Various spectral control techniques can be applied to improve the performance of a thermophotovoltaic (TPV) system. For example, a back surface reflector (BSR) can improve the performance of TPV systems. A conventional metal BSR structure enhances the photogeneration rate by increasing the absorption probability of photons via back surface reflection, affording a second chance for absorption. Howe…
▽ More
Various spectral control techniques can be applied to improve the performance of a thermophotovoltaic (TPV) system. For example, a back surface reflector (BSR) can improve the performance of TPV systems. A conventional metal BSR structure enhances the photogeneration rate by increasing the absorption probability of photons via back surface reflection, affording a second chance for absorption. However, surface passivation and external luminescence effects introduced by BSR structures have been previously ignored, which potentially decreases the performance of TPV systems. Recently, a back gapped reflector (BGR) structure was proposed to greatly improve the performance of far-field TPV systems by reducing reflection loss at the semiconductor-metal interface. In the present work, the performance improvement on a thin-film, near-field InAs TPV system with a BGR is investigated, comparing its performance to that with a conventional metal BSR. Surface passivation conditions are also investigated to further improve the performance of TPV systems with back reflectors. The output power and efficiency are calculated using an iterative model combining fluctuational electrodynamics and the full drift-diffusion model. For the well-passivated condition, when the BSR is replaced by the BGR, the calculated conversion efficiency was improved from 16.4% to 21% and the output power was increased by 10% for the near-field regime. Finally, the reflection loss and external luminescence loss are analyzed to explain the performance improvement.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Spatial profiles of photon chemical potential in near-field thermophotovoltaic cells
Authors:
Dudong Feng,
Eric J. Tervo,
Dragica Vasileska,
Shannon K. Yee,
Ajeet Rohatgi,
Zhuomin M. Zhang
Abstract:
Emitted photons stemming from the radiative recombination of electron-hole pairs carry chemical potential in radiative energy converters. This luminescent effect can substantially alter the local net photogeneration in near-field thermophotovoltaic cells. Several assumptions involving the luminescent effect are commonly made in modeling photovoltaic devices; in particular, the photon chemical pote…
▽ More
Emitted photons stemming from the radiative recombination of electron-hole pairs carry chemical potential in radiative energy converters. This luminescent effect can substantially alter the local net photogeneration in near-field thermophotovoltaic cells. Several assumptions involving the luminescent effect are commonly made in modeling photovoltaic devices; in particular, the photon chemical potential is assumed to be zero or a constant prescribed by the bias voltage. The significance of photon chemical potential depends upon the emitter temperature, the semiconductor properties, and the injection level. Hence, these assumptions are questionable in thermophotovoltaic devices operating in the near-field regime. In the present work, an iterative solver that combines fluctuational electrodynamics with the drift-diffusion model is developed to tackle the coupled photon and charge transport problem, enabling the determination of the spatial profile of photon chemical potential beyond the detailed balance approach. The difference between the results obtained by allowing the photon chemical potential to vary spatially and by assuming a constant value demonstrates the limitations of the conventional approaches. This study is critically important for performance evaluation of near-field thermophotovoltaic systems.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
Near-field heat transfer between graphene/hBN multilayers
Authors:
Bo Zhao,
Brahim Guizal,
Zhuomin M. Zhang,
Shanhui Fan,
Mauro Antezza
Abstract:
We study the radiative heat transfer between multilayer structures made by a periodic repetition of a graphene sheet and a hexagonal boron nitride (hBN) slab. Surface plasmons in a monolayer graphene can couple with a hyperbolic phonon polaritons in a single hBN film to form hybrid polaritons that can assist photon tunneling. For periodic multilayer graphene/hBN structures, the stacked metallic/di…
▽ More
We study the radiative heat transfer between multilayer structures made by a periodic repetition of a graphene sheet and a hexagonal boron nitride (hBN) slab. Surface plasmons in a monolayer graphene can couple with a hyperbolic phonon polaritons in a single hBN film to form hybrid polaritons that can assist photon tunneling. For periodic multilayer graphene/hBN structures, the stacked metallic/dielectric array can give rise to a further effective hyperbolic behavior, in addition to the intrinsic natural hyperbolic behavior of hBN. The effective hyperbolicity can enable more hyperbolic polaritons that enhance the photon tunneling and hence the near-field heat transfer. However, the hybrid polaritons on the surface, i.e. surface plasmon-phonon polaritons, dominate the near-field heat transfer between multilayer structures when the topmost layer is graphene. The effective hyperbolic regions can be well predicted by the effective medium theory (EMT), thought EMT fails to capture the hybrid surface polaritons and results in a heat transfer rate much lower compared to the exact calculation. The chemical potential of the graphene sheets can be tuned through electrical gating and results in an additional modulation of the heat transfer. We found that the near-field heat transfer between multilayer structure does not increase monotonously with the number of layer in the stack, which provides a way to control the heat transfer rate by the number of graphene layers in the multilayer structure. The results may benefit the applications of near-field energy harvesting and radiative cooling based on hybrid polaritons in two-dimensional materials.
△ Less
Submitted 10 May, 2017;
originally announced May 2017.
-
Proton radiography of magnetic field produced by ultra-intense laser irradiating capacity-coil target
Authors:
W. W. Wang,
J. Teng,
J. Chen,
H. B. Cai,
S. K. He,
W. M. Zhou,
L. Q. Shan,
F. Lu,
Y. C. Wu,
W. Hong,
D. X. Liu,
B. Bi,
F. Zhang,
F. B. Xue,
B. Y. Li,
B. Zhang,
Y. L. He,
W. He,
J. L. Jiao,
K. G. Dong,
F. Q. Zhang,
Z. G. Deng,
Z. M. Zhang,
B. Cui,
D. Han
, et al. (7 additional authors not shown)
Abstract:
Ultra-intense ultra-short laser is firstly used to irradiate the capacity-coil target to generate magnetic field. The spatial structure and temporal evolution of huge magnetic fields were studied with time-gated proton radiography method. A magnetic flux density of 40T was measured by comparing the proton deflection and particle track simulations. Although the laser pulse duration is only 30fs, th…
▽ More
Ultra-intense ultra-short laser is firstly used to irradiate the capacity-coil target to generate magnetic field. The spatial structure and temporal evolution of huge magnetic fields were studied with time-gated proton radiography method. A magnetic flux density of 40T was measured by comparing the proton deflection and particle track simulations. Although the laser pulse duration is only 30fs, the generated magnetic field can last for over 100 picoseconds. The energy conversion efficiency from laser to magnetic field can reach as high as ~20%. The results indicate that tens of tesla (T) magnetic field could be produced in many ultra intense laser facilities around the world, and higher magnetic field could be produced by picosecond lasers.
△ Less
Submitted 17 November, 2014;
originally announced November 2014.
-
Electromagnetic energy storage and power dissipation in nanostructures
Authors:
J. M. Zhao,
Z. M. Zhang
Abstract:
The processes of storage and dissipation of electromagnetic energy in nanostructures depend on both the material properties and the geometry. In this paper, the distributions of local energy density and power dissipation in nanogratings are investigated using the rigorous coupled-wave analysis. It is demonstrated that the enhancement of absorption is accompanied by the enhancement of energy storag…
▽ More
The processes of storage and dissipation of electromagnetic energy in nanostructures depend on both the material properties and the geometry. In this paper, the distributions of local energy density and power dissipation in nanogratings are investigated using the rigorous coupled-wave analysis. It is demonstrated that the enhancement of absorption is accompanied by the enhancement of energy storage both for material at the resonance of its dielectric function described by the classical Lorentz oscillator and for nanostructures at the resonance induced by its geometric arrangement. The appearance of strong local electric field in nanogratings at the geometry-induced resonance is directly related to the maximum electric energy storage. Analysis of the local energy storage and dissipation can also help gain a better understanding of the global energy storage and dissipation in nanostructures for photovoltaic and heat transfer applications.
△ Less
Submitted 7 November, 2014;
originally announced November 2014.
