Showing 1–50 of 868 results for author: Zhang, W

A novel parallelizable convergence accelerating method: Pointwise Frequency Damping

Authors: Zikun Liu, Xukun Wang, Yilang Liu, Weiwei Zhang

Abstract: This paper proposes a novel class of data-driven acceleration methods for steady-state flow field solvers. The core innovation lies in predicting and assigning the asymptotic limit value for each parameter during iterations based on its own historical data, rather than processing and assigning the entire flow field at once. This approach fundamentally guarantees identical results between serial an… ▽ More This paper proposes a novel class of data-driven acceleration methods for steady-state flow field solvers. The core innovation lies in predicting and assigning the asymptotic limit value for each parameter during iterations based on its own historical data, rather than processing and assigning the entire flow field at once. This approach fundamentally guarantees identical results between serial and parallel computations. Subsequently, a formula for representing the asymptotic limit based on historical data is derived and discretized, yielding a purely algebraic expression.Furthermore, the applicability scope of the method is discussed, along with the underlying reasons for its acceleration capability. A quantitative expression for estimating the speedup ratio is also provided. Extensive validation cases were tested, ranging from the simplest inviscid airfoil flow to complex three-dimensional viscous transonic cruise flow around a aircraft, and solving asymmetric linear systems via GMRES. These tests consistently demonstrate significant acceleration effects with speedup factors ranging from 2.5 to 4. Combined with the near-zero computational overhead of the purely algebraic formulation during the solving process and the inherently parallel-compatible pointwise prediction principle, the results strongly indicate that this method is highly suitable for large-scale industrial mesh computations. △ Less

Submitted 7 July, 2025; originally announced July 2025.

Comments: 18 pages, 10 figures

3D surface profiling via photonic integrated geometric sensor

Authors: Ziyao Zhang, Yizhi Wang, Chunhui Yao, Huiyu Huang, Rui Ma, Xin Du, Wanlu Zhang, Zhitian Shi, Minjia Chen, Ting Yan, Liang Ming, Yuxiao Ye, Richard Penty, Qixiang Cheng

Abstract: Measurements of microscale surface patterns are essential for process and quality control in industries across semiconductors, micro-machining, and biomedicines. However, the development of miniaturized and intelligent profiling systems remains a longstanding challenge, primarily due to the complexity and bulkiness of existing benchtop systems required to scan large-area samples. A real-time, in-s… ▽ More Measurements of microscale surface patterns are essential for process and quality control in industries across semiconductors, micro-machining, and biomedicines. However, the development of miniaturized and intelligent profiling systems remains a longstanding challenge, primarily due to the complexity and bulkiness of existing benchtop systems required to scan large-area samples. A real-time, in-situ, and fast detection alternative is therefore highly desirable for predicting surface topography on the fly. In this paper, we present an ultracompact geometric profiler based on photonic integrated circuits, which directly encodes the optical reflectance of the sample and decodes it with a neural network. This platform is free of complex interferometric configurations and avoids time-consuming nonlinear fitting algorithms. We show that a silicon programmable circuit can generate pseudo-random kernels to project input data into higher dimensions, enabling efficient feature extraction via a lightweight one-dimensional convolutional neural network. Our device is capable of high-fidelity, fast-scanning-rate thickness identification for both smoothly varying samples and intricate 3D printed emblem structures, paving the way for a new class of compact geometric sensors. △ Less

Submitted 29 June, 2025; originally announced June 2025.

Microgravity-assisted off-axis spin vortex in a $^{87}$Rb dipolar spinor Bose-Einstein condensate

Authors: Hui Tang, Wenxian Zhang

Abstract: The generation of the ground state of a spin vortex in a $^{87}$Rb Bose-Einstein condensate with the assistance of an optical plug has been studied. However, gravity is everywhere, and this potential linear dependence on the spatial position will destroy the axisymmetric structure of the system with the optical plug. In this case, the question of whether the spin vortex ground state still exists r… ▽ More The generation of the ground state of a spin vortex in a $^{87}$Rb Bose-Einstein condensate with the assistance of an optical plug has been studied. However, gravity is everywhere, and this potential linear dependence on the spatial position will destroy the axisymmetric structure of the system with the optical plug. In this case, the question of whether the spin vortex ground state still exists remains unresolved. The present study aims to explore the impact of microgravity on the formation of the spin vortex state with the assistance of an optical plug. To this end, a simple model has been employed to provide a comprehensive understanding of the phenomenon. The Gross-Pitaevskii equations are solved by setting the optical plug intensity, adjusting the optical plug width, and adjusting the microgravity strength. This process results in the phase diagram for the single-mode state and spin vortex state. Under microgravity situations, we observe an off-axis structure of the spin vortex state. Our calculations offer a reliable approach to generating spin vortex states in a microgravity environment. △ Less

Submitted 18 June, 2025; originally announced June 2025.

All-optical convolution utilizing processing in memory based on a cold atomic ensemble

Authors: Ying-Hao Ye, Jia-Qi Jiang, En-Ze Li, Wei Zhang, Da-Chuang Li, Zhi-Han Zhu, Dong-Sheng Ding, Bao-Sen Shi

Abstract: Processing in memory (PIM) has received significant attention due to its high efficiency, low latency, and parallelism. In optical computation, coherent memory is a crucial infrastructure for PIM frameworks. This study presents an all-optical convolution experiment conducted within computational storage based on a cold atomic ensemble. By exploiting the light-atom phase transfer facilitated by the… ▽ More Processing in memory (PIM) has received significant attention due to its high efficiency, low latency, and parallelism. In optical computation, coherent memory is a crucial infrastructure for PIM frameworks. This study presents an all-optical convolution experiment conducted within computational storage based on a cold atomic ensemble. By exploiting the light-atom phase transfer facilitated by the electromagnetically induced transparency, we demonstrated spiral phase contrast processing of photon images in memory, resulting in the edge enhancement of retrieved images recorded using time-correlated photon imaging. In particular, adopting state-of-the-art atomic techniques provides a coherent memory lifetime exceeding 320 us for PIM operations. Our results highlight the significant potential of cold atomic ensembles as computational storage for developing all-optical PIM systems. △ Less

Submitted 17 June, 2025; originally announced June 2025.

Comments: 6 pages, 3 figures, supplmental material appended

Non-Hermitian topological electric circuits with projective symmetry

Authors: Wenjie Zhang, Yuting Yang, Xiaopeng Shen, Liwei Shi, Zhi Hong Hang

Abstract: Non-Hermitian topological insulators have attracted considerable attention due to their distinctive energy band characteristics and promising applications. Here, we systematically investigate non-Hermitian Möbius insulators and graphene-like topological semimetals from the projected symmetry and realize their corresponding topological phenomena in an electric circuit-based framework. By introducin… ▽ More Non-Hermitian topological insulators have attracted considerable attention due to their distinctive energy band characteristics and promising applications. Here, we systematically investigate non-Hermitian Möbius insulators and graphene-like topological semimetals from the projected symmetry and realize their corresponding topological phenomena in an electric circuit-based framework. By introducing a nonreciprocal hopping term consisting of negative impedance converters into a two-dimensional electric circuit, we establish an experimental platform that effectively demonstrates that introducing non-Hermitian terms significantly enhances the energy localization of topological edge states, which originate from the non-Hermitian skin effect. Furthermore, a thorough comparison of experimental measurements with numerical simulations validates the robustness and reliability of our electric circuit structure. This work not only reveals the physical properties of non-Hermitian topological materials but also provides valuable theoretical and experimental guidance for the implementation of topological circuits and the design of radiofrequency devices in the future. △ Less

Submitted 17 June, 2025; originally announced June 2025.

Comments: 12 pages,7 figures

Ultrafast High-Flux Single-Photon LiDAR Simulator via Neural Mapping

Authors: Weijian Zhang, Hashan K. Weerasooriya, Stanley Chan

Abstract: Efficient simulation of photon registrations in single-photon LiDAR (SPL) is essential for applications such as depth estimation under high-flux conditions, where hardware dead time significantly distorts photon measurements. However, the conventional wisdom is computationally intensive due to their inherently sequential, photon-by-photon processing. In this paper, we propose a learning-based fram… ▽ More Efficient simulation of photon registrations in single-photon LiDAR (SPL) is essential for applications such as depth estimation under high-flux conditions, where hardware dead time significantly distorts photon measurements. However, the conventional wisdom is computationally intensive due to their inherently sequential, photon-by-photon processing. In this paper, we propose a learning-based framework that accelerates the simulation process by modeling the photon count and directly predicting the photon registration probability density function (PDF) using an autoencoder (AE). Our method achieves high accuracy in estimating both the total number of registered photons and their temporal distribution, while substantially reducing simulation time. Extensive experiments validate the effectiveness and efficiency of our approach, highlighting its potential to enable fast and accurate SPL simulations for data-intensive imaging tasks in the high-flux regime. △ Less

Submitted 29 May, 2025; originally announced May 2025.

Comments: Accepted to ICIP 2025

Transparent and heat-insulation bionic hydrogel-based smart window system for long-term cooling and waste heat collection

Authors: Qianwang Ye, Hanqing Dai, Yukun Yan, Liwei Wang, Xinlin Du, Yimeng Wang, Zhile Han, Wanlu Zhang, Ruiqian Guo

Abstract: With the energy crisis and climate warming, the position of a new generation of smart windows is becoming increasingly important, and materials or systems that can have high blocking of near-infrared (NIR) and ultraviolet (UV) and high transmittance of visible light (VIS) are needed. Currently, it is difficult for smart heat-insulation materials to achieve high transmittance of VIS, good UV isolat… ▽ More With the energy crisis and climate warming, the position of a new generation of smart windows is becoming increasingly important, and materials or systems that can have high blocking of near-infrared (NIR) and ultraviolet (UV) and high transmittance of visible light (VIS) are needed. Currently, it is difficult for smart heat-insulation materials to achieve high transmittance of VIS, good UV isolation, outstanding cooling and thermal insulation, and excellent waste heat collection. Here, we design a novel composite hydrogel to achieve an average 92% VIS transmittance, efficient UV absorption , 11 Celsius degree of thermal insulation, and sensing properties. Interestingly, we designed a transparent heat insulation system with this composite hydrogel to obtain about 22 Celsius degree of the record-breaking insulation performance for 168 hours, waste heat collection and reutilization, and temperature sensing. Our findings provide new ideas and possibilities for designing transparent and heat-insulation smart window systems. △ Less

Submitted 29 May, 2025; originally announced May 2025.

Align-DA: Align Score-based Atmospheric Data Assimilation with Multiple Preferences

Authors: Jing-An Sun, Hang Fan, Junchao Gong, Ben Fei, Kun Chen, Fenghua Ling, Wenlong Zhang, Wanghan Xu, Li Yan, Pierre Gentine, Lei Bai

Abstract: Data assimilation (DA) aims to estimate the full state of a dynamical system by combining partial and noisy observations with a prior model forecast, commonly referred to as the background. In atmospheric applications, this problem is fundamentally ill-posed due to the sparsity of observations relative to the high-dimensional state space. Traditional methods address this challenge by simplifying b… ▽ More Data assimilation (DA) aims to estimate the full state of a dynamical system by combining partial and noisy observations with a prior model forecast, commonly referred to as the background. In atmospheric applications, this problem is fundamentally ill-posed due to the sparsity of observations relative to the high-dimensional state space. Traditional methods address this challenge by simplifying background priors to regularize the solution, which are empirical and require continual tuning for application. Inspired by alignment techniques in text-to-image diffusion models, we propose Align-DA, which formulates DA as a generative process and uses reward signals to guide background priors, replacing manual tuning with data-driven alignment. Specifically, we train a score-based model in the latent space to approximate the background-conditioned prior, and align it using three complementary reward signals for DA: (1) assimilation accuracy, (2) forecast skill initialized from the assimilated state, and (3) physical adherence of the analysis fields. Experiments with multiple reward signals demonstrate consistent improvements in analysis quality across different evaluation metrics and observation-guidance strategies. These results show that preference alignment, implemented as a soft constraint, can automatically adapt complex background priors tailored to DA, offering a promising new direction for advancing the field. △ Less

Submitted 28 May, 2025; originally announced May 2025.

Nano-Raman Spectroscopy Analysis of Nanoprotuberances in MoSe2

Authors: Jane Elisa Guimarães, Rafael Nadas, Rayan Alves, Wenjin Zhang, Takahiko Endo, Kenji Watanabe, Takashi Taniguchi, Riichiro Saito, Yasumitsu Miyata, Bernardo R. A. Neves, Ado Jorio

Abstract: Contaminations in the formation of two-dimensional heterostructures can hinder or generate desired properties. Recent advancements have highlighted the potential of tip-enhanced Raman spectroscopy (TERS) for studying materials in the 2D semiconductor class. In this work, we investigate the influence of 50-200nm sized nanoprotuberances within a monolayer of MoSe$_2$ deposited on hBN using nano-Rama… ▽ More Contaminations in the formation of two-dimensional heterostructures can hinder or generate desired properties. Recent advancements have highlighted the potential of tip-enhanced Raman spectroscopy (TERS) for studying materials in the 2D semiconductor class. In this work, we investigate the influence of 50-200nm sized nanoprotuberances within a monolayer of MoSe$_2$ deposited on hBN using nano-Raman spectroscopy, establishing correlations between the presence of localized contaminations and the observed hyperspectral variations. A figure of merit is established for the identification of surface impurities, based on MoSe$_2$ peaks ratio. Notably, new spectral peaks were identified, which are associated with the presence of nanoprotuberances and may indicate contamination and oxidation. △ Less

Submitted 25 May, 2025; originally announced May 2025.

High-Efficiency Plasma-Based Compressor for Ultrafast Soft X-ray Free-Electron Lasers

Authors: Mingchang Wang, Li Zeng, Bingbing Zhang, Qinghao Zhu, Xiaozhe Shen, Xiaofan Wang, Qinming Li, Weiqing Zhang

Abstract: The generation of intense, femtosecond-scale X-ray pulses is crucial for probing matter under extreme temporal and field conditions. Current chirped-pulse amplification (CPA) techniques in free-electron lasers (FELs), however, face efficiency limitations in the soft X-ray regime due to the inherent constraints of conventional optical compressors. To address this challenge, we propose a high-effici… ▽ More The generation of intense, femtosecond-scale X-ray pulses is crucial for probing matter under extreme temporal and field conditions. Current chirped-pulse amplification (CPA) techniques in free-electron lasers (FELs), however, face efficiency limitations in the soft X-ray regime due to the inherent constraints of conventional optical compressors. To address this challenge, we propose a high-efficiency plasma-based compressor utilizing highly ionized noble gas plasma. Exploiting strong refractive index dispersion near ionic resonances, this scheme achieves over 70% transmission efficiency around 5.2 nm, and is extendable to other highly charged ions for operation across the soft X-ray to vacuum ultraviolet range. Simulations demonstrate that a 25 fs FEL pulse can be compressed to 1.4 fs with peak power boosted to over 100 GW, while maintaining high energy throughput. This approach overcomes the long-standing efficiency bottleneck of soft X-ray CPA and opens a scalable path toward compact, high-brightness attosecond FEL sources. △ Less

Submitted 30 May, 2025; v1 submitted 22 May, 2025; originally announced May 2025.

An adaptive, data-driven multiscale approach for dense granular flows

Authors: B. Siddani, Weiqun Zhang, Andrew Nonaka, John Bell, Ishan Srivastava

Abstract: The accuracy of coarse-grained continuum models of dense granular flows is limited by the lack of high-fidelity closure models for granular rheology. One approach to addressing this issue, referred to as the hierarchical multiscale method, is to use a high-fidelity fine-grained model to compute the closure terms needed by the coarse-grained model. The difficulty with this approach is that the over… ▽ More The accuracy of coarse-grained continuum models of dense granular flows is limited by the lack of high-fidelity closure models for granular rheology. One approach to addressing this issue, referred to as the hierarchical multiscale method, is to use a high-fidelity fine-grained model to compute the closure terms needed by the coarse-grained model. The difficulty with this approach is that the overall model can become computationally intractable due to the high computational cost of the high-fidelity model. In this work, we describe a multiscale modeling approach for dense granular flows that utilizes neural networks trained using high-fidelity discrete element method (DEM) simulations to approximate the constitutive granular rheology for a continuum incompressible flow model. Our approach leverages an ensemble of neural networks to estimate predictive uncertainty that allows us to determine whether the rheology at a given point is accurately represented by the neural network model. Additional DEM simulations are only performed when needed, minimizing the number of additional DEM simulations required when updating the rheology. This adaptive coupling significantly reduces the overall computational cost of the approach while controlling the error. In addition, the neural networks are customized to learn regularized rheological behavior to ensure well-posedness of the continuum solution. We first validate the approach using two-dimensional steady-state and decelerating inclined flows. We then demonstrate the efficiency of our approach by modeling three-dimensional sub-aerial granular column collapse for varying initial column aspect ratios, where our multiscale method compares well with the computationally expensive computational fluid dynamics (CFD)-DEM simulation. △ Less

Submitted 30 April, 2025; originally announced May 2025.

Comments: 40 pages, 10 figures, 2 tables

First Lasing and Stable Operation of a Direct-Amplification Enabled Harmonic Generation Free-Electron laser

Authors: Zheng Qi, Junhao Liu, Lanpeng Ni, Tao Liu, Zhen Wang, Kaiqing Zhang, Hanxiang Yang, Zhangfeng Gao, Nanshun Huang, Si Chen, Hang Luo, Yaozong Xiao, Cheng Yu, Yongmei Wen, Fei Gao, Yangyang Lei, Huan Zhao, Yanyan Zhu, Liping Sun, Weiyi Yin, Xingtao Wang, Taihe Lan, Xiaoqing Liu, Lie Feng, Wenyan Zhang , et al. (5 additional authors not shown)

Abstract: Seeded free-electron lasers (FELs) capable of operating at repetition rates up to the MHz level are in high demand for advanced time-resolved spectroscopies, which require both full longitudinal coherence and high average photon flux in the extreme ultraviolet (EUV) and x-ray regimes. However, conventional external-seed laser systems cannot sustain MHz operation with sufficient hundreds of megawat… ▽ More Seeded free-electron lasers (FELs) capable of operating at repetition rates up to the MHz level are in high demand for advanced time-resolved spectroscopies, which require both full longitudinal coherence and high average photon flux in the extreme ultraviolet (EUV) and x-ray regimes. However, conventional external-seed laser systems cannot sustain MHz operation with sufficient hundreds of megawatts peak power requirement due to their limited total power. Here, we report the first lasing and stable operation of a direct-amplification-enabled harmonic generation FEL driven by a weak seed laser with MW-level peak power. Beginning with an ultraviolet seed laser with only 0.75 μJ pulse energy, we demonstrate its direct amplification to over 10 μJ within an 8-meter-long modulator. We observe coherent harmonic generation up to the 12th harmonic of the seed and achieve saturation of the 7th harmonic in the radiator. These results represent a crucial milestone toward the realization of MHz-class, fully coherent EUV and x-ray light sources. △ Less

Submitted 18 May, 2025; originally announced May 2025.

Compact, Large-Scale Photonic Neurons by Modulation-and-Weight Microring Resonators

Authors: Weipeng Zhang, Yuxin Wang, Joshua C. Lederman, Bhavin J. Shastri, Paul R. Prucnal

Abstract: Fabrication imperfections, spatial constraints, and prohibitive costs collectively impede the scalability of neuromorphic photonics. In this work, we introduce a large-scale, compact photonic neuron in which each microring performs modulation and weighting simultaneously. This dual functionality is realized by leveraging both the carrier effect and thermal tunability, thereby merging modulation an… ▽ More Fabrication imperfections, spatial constraints, and prohibitive costs collectively impede the scalability of neuromorphic photonics. In this work, we introduce a large-scale, compact photonic neuron in which each microring performs modulation and weighting simultaneously. This dual functionality is realized by leveraging both the carrier effect and thermal tunability, thereby merging modulation and weighting to conserve on-chip area, enhancing tuning efficiency, and capitalizing on wavelength-division multiplexing (WDM) for scalable implementations. In addition, we investigated a range of configurations for the proposed neuron to better tailor its behavior to various computational tasks. To illustrate the adaptability of the system's tasks, we explore both spatial and temporal domains, highlighting its versatility through two representative tasks: image processing and, for the first time, financial time series analysis, which represents a promising new frontier for neuromorphic photonics. These findings underscore the considerable promise of photonic computing in addressing a breadth of real-world challenges, particularly under escalating demands for both scalability and flexibility. △ Less

Submitted 22 May, 2025; v1 submitted 16 May, 2025; originally announced May 2025.

Multi-channel electrically tunable varifocal metalens with compact multilayer polarization-dependent metasurfaces and liquid crystals

Authors: Zhiyao Ma, Zhe Li, Tian Tian, Yuxuan Liao, Xue Feng, Yongzhuo Li, Kaiyu Cui, Fang Liu, Hao Sun, Wei Zhang, Yidong Huang

Abstract: As an essential module of optical systems, varifocal lens usually consists of multiple mechanically moving lenses along the optical axis. The recent development of metasurfaces with tunable functionalities holds the promise of miniaturizing varifocal lens. However, existing varifocal metalenses are hard to combine electrical tunability with scalable number and range of focal lengths, thus limiting… ▽ More As an essential module of optical systems, varifocal lens usually consists of multiple mechanically moving lenses along the optical axis. The recent development of metasurfaces with tunable functionalities holds the promise of miniaturizing varifocal lens. However, existing varifocal metalenses are hard to combine electrical tunability with scalable number and range of focal lengths, thus limiting the practical applications. Our previous work shows that the electrically tunable channels could be increased to 2N by cascading N polarization-dependent metasurfaces with liquid crystals (LCs). Here, we demonstrated a compact eight-channel electrically tunable varifocal metalens with three single-layer polarization-multiplexed bi-focal metalens and three LC cells. The total thickness of the device is ~6 mm, while the focal lengths could be switched among eight values within the range of 3.6 to 9.6 mm. The scheme is scalable in number and range of focal lengths and readily for further miniaturization. We believe that our proposal would open new possibilities of miniaturized imaging systems, AR/VR displays, LiDAR, etc. △ Less

Submitted 16 May, 2025; originally announced May 2025.

A fully flexible joint lattice position and dose optimization method for LATTICE therapy

Authors: Xin Tong, Weijie Zhang, Ya-Nan Zhu, Xue Hong, Chao Wang, Jufri Setianegara, Yuting Lin, Hao Gao

Abstract: Lattice radiotherapy (LATTICE) is a form of spatially fractionated radiation therapy (SFRT) designed to deliver high doses to tumor regions while sparing surrounding tissues. Traditional LATTICE uses rigid vertex patterns, limiting adaptability for irregular tumors or those near critical organs. This study introduces a novel planning method with flexible vertex placement and joint optimization of… ▽ More Lattice radiotherapy (LATTICE) is a form of spatially fractionated radiation therapy (SFRT) designed to deliver high doses to tumor regions while sparing surrounding tissues. Traditional LATTICE uses rigid vertex patterns, limiting adaptability for irregular tumors or those near critical organs. This study introduces a novel planning method with flexible vertex placement and joint optimization of vertex positions and dose distribution, enhancing treatment precision. The method integrates vertex positioning with other treatment variables within a constrained optimization framework, allowing dynamic adjustments. Results showed that plans generated with the new method (NEW) demonstrated superior or comparable quality to conventional LATTICE plans, with improvements in the optimization objective and peak-to-valley dose ratio (PVDR). This approach offers significant improvements in target dose conformity and OAR sparing, providing an enhanced LATTICE technique. △ Less

Submitted 19 May, 2025; v1 submitted 13 May, 2025; originally announced May 2025.

Direct Observation of k-Gaps in Dynamically Modulated Phononic Time Crystal

Authors: Z. Liu, X. Zhu, Z. G. Zhang, W. M. Zhang, X. Chen, Y. Q. Yang, R. W. Peng, M. Wang, J. Li, H. W. Wu

Abstract: Floquet time crystals, characterized by momentum gaps (k-gaps), have sparked intense interest across various branches of physics due to their intriguing dynamics and promising applications. Despite growing theoretical efforts, the realization and observation of phononic time crystals, especially for airborne sound, remain significant experimental challenges. In this work, we demonstrate a phononic… ▽ More Floquet time crystals, characterized by momentum gaps (k-gaps), have sparked intense interest across various branches of physics due to their intriguing dynamics and promising applications. Despite growing theoretical efforts, the realization and observation of phononic time crystals, especially for airborne sound, remain significant experimental challenges. In this work, we demonstrate a phononic time crystal by integrating discrete resonant meta-atoms into a one-dimensional acoustic waveguide, effectively creating a homogeneous, time-varying metamaterial. By dynamically modulating the effective compressibility, we experimentally observe exponential acoustic wave amplification, offering clear evidence of k-gap formation. Furthermore, we showcase the versatility of our platform by inducing momentum band folding and double k-gap phenomena via quasi-periodic temporal modulation. This flexible and reconfigurable approach not only enables the design of tailor-made resonant responses but also opens new avenues for realizing higher-dimensional phononic time crystals and exploring nontrivial topological dynamics in time-modulated media. △ Less

Submitted 30 May, 2025; v1 submitted 11 May, 2025; originally announced May 2025.

Comments: 4 figures

A Proton Treatment Planning Method for Combining FLASH and Spatially Fractionated Radiation Therapy to Enhance Normal Tissue Protection

Authors: Weijie Zhang, Xue Hong, Ya-Nan Zhu, Yuting Lin, Gregory Gan, Ronald C Chen, Hao Gao

Abstract: Background: FLASH radiation therapy (FLASH-RT) uses ultra-high dose rates to induce the FLASH effect, enhancing normal tissue sparing. In proton Bragg peak FLASH-RT, this effect is confined to high-dose regions near the target at deep tissue levels. In contrast, Spatially Fractionated Radiation Therapy (SFRT) creates alternating high- and low-dose regions with high peak-to-valley dose ratios (PVDR… ▽ More Background: FLASH radiation therapy (FLASH-RT) uses ultra-high dose rates to induce the FLASH effect, enhancing normal tissue sparing. In proton Bragg peak FLASH-RT, this effect is confined to high-dose regions near the target at deep tissue levels. In contrast, Spatially Fractionated Radiation Therapy (SFRT) creates alternating high- and low-dose regions with high peak-to-valley dose ratios (PVDR), sparing tissues at shallow-to-intermediate depths. Purpose: This study investigates a novel proton modality (SFRT-FLASH) that synergizes FLASH-RT and SFRT to enhance normal tissue protection across all depths. Methods: Two SFRT techniques are integrated with FLASH-RT: proton GRID therapy (pGRID) with conventional beam sizes and proton minibeam radiation therapy (pMBRT) with submillimeter beams. These are implemented as pGRID-FLASH (SB-FLASH) and minibeam-FLASH (MB-FLASH), respectively. The pGRID technique uses a scissor-beam (SB) method to achieve uniform target coverage. To meet FLASH dose (5 Gy) and dose-rate (40 Gy/s) thresholds, a single-field uniform-dose-per-fraction strategy is used. Dose and dose-rate constraints are jointly optimized, including a CTV1cm structure (a 1 cm ring around the CTV) for each field. Results: Across four clinical cases, MB-FLASH and SB-FLASH plans were benchmarked against conventional (CONV), FLASH-RT (FLASH), pMBRT (MB), and pGRID (SB) plans. SFRT-FLASH achieved high FLASH effect coverage (~60-80% in CTV1cm) while preserving PVDR (~2.5-7) at shallow-to-intermediate depths. Conclusions: We present a proton treatment planning approach that combines the FLASH effect at depth with high PVDR near the surface, enhancing normal tissue protection and advancing proton therapy. △ Less

Submitted 9 May, 2025; originally announced May 2025.

GECAM Discovery of Peculiar Oscillating Particle Precipitation Events

Authors: Chenwei Wang, Shaolin Xiong, Yi Zhao, Wei Xu, Gaopeng Lu, Xuzhi Zhou, Xiaocheng Guo, Wenya Li, Xiaochao Yang, Qinghe Zhang, Xinqiao Li, Zhenxia Zhang, Zhenghua An, Ce Cai, Peiyi Feng, Yue Huang, Min Gao, Ke Gong, Dongya Guo, Haoxuan Guo, Bing Li, Xiaobo Li, Yaqing Liu, Jiacong Liu, Xiaojing Liu , et al. (30 additional authors not shown)

Abstract: Charged particle precipitation typically manifests as a gradual increase and decrease of flux observed by space detectors. Cases with rapidly flux variation are very rare. Periodic events are even more extraordinary. These oscillating particle precipitation (OPP) events are usually attributed to the bounce motion of electrons, which are induced by lightning. Owing to the observation limitations, t… ▽ More Charged particle precipitation typically manifests as a gradual increase and decrease of flux observed by space detectors. Cases with rapidly flux variation are very rare. Periodic events are even more extraordinary. These oscillating particle precipitation (OPP) events are usually attributed to the bounce motion of electrons, which are induced by lightning. Owing to the observation limitations, there has been debate regarding whether these oscillations originate from temporal flux evolution or spatial structure evolution. Here we report three peculiar charged particle precipitation events detected by GECAM during a geomagnetic storm on March 21, 2024, with two exhibiting significant periodicity. These events were observed around the same region during three consecutive orbits. Through comprehensive temporal and spectral analyses, we revealed that one of the OPP events exhibited a transition in spectral lag of mini-pulses, shifting from "softer-earlier" to "softer-later" while showing no significant time evolution in overall frequency characteristics. And there is no association found between these two OPP events and lightning activity. Several possible scenarios are discussed to explain these charged particles with a life time of more than 3.5 hours, but the nature of these three events remains an enigma. We suggest that these GECAM-detected OPP events may represent a new type of particle precipitation event or a peculiar Lightning-induced Electron Precipitations (LEPs). △ Less

Submitted 9 May, 2025; originally announced May 2025.

Pitch Angle Measurement Method based on Detector Counts Distribution. -I. Basic conception

Authors: Chenwei Wang, Shaolin Xiong, Hongbo Xue, Yiteng Zhang, Shanzhi Ye, Wei Xu, Jinpeng Zhang, Zhenghua An, Ce Cai, Peiyi Feng, Ke Gong, Haoxuan Guo, Yue Huang, Xinqiao Li, Jiacong Liu, Xiaojing Liu, Xiang Ma, Liming Song, Wenjun Tan, Jin Wang, Ping Wang, Yue Wang, Xiangyang Wen, Shuo Xiao, Shenlun Xie , et al. (14 additional authors not shown)

Abstract: As an X-ray and gamma-ray all-sky monitor aiming for high energy astrophysical transients, Gravitational-wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) has also made a series of observational discoveries on burst events of gamma-rays and particles in the low Earth orbit. Pitch angle is one of the key parameters of charged particles traveling around geomagnetic field. However,… ▽ More As an X-ray and gamma-ray all-sky monitor aiming for high energy astrophysical transients, Gravitational-wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) has also made a series of observational discoveries on burst events of gamma-rays and particles in the low Earth orbit. Pitch angle is one of the key parameters of charged particles traveling around geomagnetic field. However, the usage of the GECAM-style instruments to measure the pitch angle of charged particles is still lacking. Here we propose a novel method for GECAM and similar instruments to measure the pitch angle of charged particles based on detector counts distribution. The basic conception of this method and simulation studies are described. With this method, the pitch angle of a peculiar electron precipitation event detected by GECAM-C is derived to be about 90$^\circ$, demonstrating the feasibility of our method. We note that the application of this method on GECAM-style instruments may open a new window for studying space particle events, such as Terrestrial Electron Beams (TEBs) and Lightning-induced Electron Precipitations (LEPs). △ Less

Submitted 9 May, 2025; originally announced May 2025.

Demonstration of Direct-amplification Enabled Harmonic Generation in an Ultraviolet Free-Electron Laser

Authors: Hao Sun, Jitao Sun, Li Zeng, Yifan Liang, Lingjun Tu, Huaiqian Yi, Qinming Li, Xiaofan Wang, Yong Yu, Jiayue Yang, Zhigang He, Yuhuan Tian, Likai Wang, Zequn Wang, Guorong Wu, Weiqing Zhang, Xueming Yang

Abstract: We report the experimental demonstration of direct-amplification enabled harmonic generation in an ultraviolet free-electron laser (FEL) driven by a low-intensity seed laser. By employing a versatile undulator configuration that enables seed amplification and harmonic generation within a unified setup, we achieved over 100-fold energy gain of the seed and observed exponential growth at the second… ▽ More We report the experimental demonstration of direct-amplification enabled harmonic generation in an ultraviolet free-electron laser (FEL) driven by a low-intensity seed laser. By employing a versatile undulator configuration that enables seed amplification and harmonic generation within a unified setup, we achieved over 100-fold energy gain of the seed and observed exponential growth at the second harmonic. The results demonstrate that a sufficiently long modulator can not only amplify a weak seed but also induce strong energy modulation of the electron beam, enabling efficient harmonic bunching. This method markedly relaxes the power requirements on external seed lasers and presents a viable route toward high-repetition-rate, fully coherent FELs △ Less

Submitted 9 May, 2025; originally announced May 2025.

Frequency Range Boosted Magnetometry Beyond the Spin Coherence Limit via Compressive Sensing

Authors: Ruiqi Wang, Peiyu Yang, Ding Huang, Guzhi Bao, Weiping Zhang

Abstract: Free induction decay (FID) of spin precession serves as an essential tool for quantum sensing across diverse platforms. While extending spin coherence time remains critical for sensitivity enhancement, the requisite long single-shot acquisitions narrow the resolvable frequency range, establishing a fundamental ``spin coherence limit (SCL)'', according to the Nyquist Sampling Theorem. Besides, conv… ▽ More Free induction decay (FID) of spin precession serves as an essential tool for quantum sensing across diverse platforms. While extending spin coherence time remains critical for sensitivity enhancement, the requisite long single-shot acquisitions narrow the resolvable frequency range, establishing a fundamental ``spin coherence limit (SCL)'', according to the Nyquist Sampling Theorem. Besides, conventional spectral analysis for FID measurement suffers from frequency alias, causing signal attenuation and positional errors that compromise the measurement validity. Here, we demonstrate a general frequency-range-extended technique that overcomes SCL by leveraging compressive sensing. By applying this method to the FID magnetometer, we expand the resolvable frequency range significantly from the Nyquist-limited range of 251\,Hz to 3000\,Hz, effectively avoiding frequency alias. Our work paves the way for implementing long-coherence-time spin systems in high-sensitivity, broad-bandwidth, and alias-free magnetic field sensing. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Complete suppression of flux instabilities in ramped superconducting magnets with synchronous temperature-modulated Jc

Authors: Cun Xue, Han-Xi Ren, Kai-Wei Cao, Wei Liu, Wen-Tao Zhang, Fang Yang, Guo Yan, You-He Zhou, Pingxiang Zhang

Abstract: Nonlinear multi-field coupling as an intrinsic property of complex physical systems often leads to abrupt and undesired instabilities. For current-ramped high-field Nb3Sn magnets, frequent flux jumps are observed, which easily causes premature quenches and requires prolonged and resource-intensive magnet training process. In this study, we propose a paradigm-shifting methodology framework that ach… ▽ More Nonlinear multi-field coupling as an intrinsic property of complex physical systems often leads to abrupt and undesired instabilities. For current-ramped high-field Nb3Sn magnets, frequent flux jumps are observed, which easily causes premature quenches and requires prolonged and resource-intensive magnet training process. In this study, we propose a paradigm-shifting methodology framework that achieves complete suppression of thermomagnetic instabilities through synchronized temperature-modulated critical current density (Jc). Through numerical simulations of flux jumps in multifilamentary Nb3Sn wires at various temperatures, we construct thermomagnetic stability diagram in the Ha-T plane. The simulated results are in good agreement with experiments, confirming that the synchronized temperature ramp-down can fully eliminate flux jumps. We reveal the underlying mechanism of enhancing the thermomagnetic stability arises from that synchronized temperature ramp-down can continuously tune both Jc and its slope. Furthermore, we explore the thermomagnetic instabilities of current-ramped superconducting magnets through large-scale GPU-optimized algorithm. The flux jump and quench diagram in the Ia-T plane are obtained. It indicates that the temperature ramp-down can completely suppress flux jumps without compromising Jc at high magnetic fields. Importantly, this method does not require modifications to the superconducting microstructures or fabrication process, offering a practical and broadly applicable solution. The findings not only provide a robust method for stabilizing various superconducting magnet systems, including high-temperature superconducting magnets wound with second-generated (2G) coated tapes, but also suggest a generalizable strategy for controlling instability in other nonlinear non-equilibrium physical systems. △ Less

Submitted 12 May, 2025; v1 submitted 7 May, 2025; originally announced May 2025.

Elucidating the role of ribosomal A1493 in stabilization and rigid support for the codon-anticodon helix from molecular dynamics simulations

Authors: Shuhao Zhang, Zhen Wang, Jie Qiao, Wenbing Zhang

Abstract: The ribosome ensures translational accuracy by monitoring codon-anticodon interactions at the A site decoding center. However, the mechanism by which conserved nucleotide A1493 contributes to this process remains controversial. To address this, we performed molecular dynamics simulations initiated from ribosomal recognition intermediate, revealing A1493's multiple roles in decoding. Through 2D umb… ▽ More The ribosome ensures translational accuracy by monitoring codon-anticodon interactions at the A site decoding center. However, the mechanism by which conserved nucleotide A1493 contributes to this process remains controversial. To address this, we performed molecular dynamics simulations initiated from ribosomal recognition intermediate, revealing A1493's multiple roles in decoding. Through 2D umbrella sampling, we quantified the coupling between A1493 flipping and the stability of the first base pair in the codon-anticodon helix. Our results demonstrate that A1493 promotes mRNA-tRNA pairing through entropy-driven stabilization, amplifies stability differences between cognate and near-cognate tRNAs, and functions as a "wedge" to provide rigid support for the codon-anticodon helix. Further analysis identified steric complementarity as essential for proper A1493 flipping, with the tRNA 37th position playing a key structural role. Additionally, we explored how pseudouridine modification and translocation influence codon-anticodon stability. Together, these findings refine the current mechanistic framework of ribosomal decoding. △ Less

Submitted 2 May, 2025; originally announced May 2025.

Comments: 26 pages, 9 figures

Roadmap on Advancements of the FHI-aims Software Package

Authors: Joseph W. Abbott, Carlos Mera Acosta, Alaa Akkoush, Alberto Ambrosetti, Viktor Atalla, Alexej Bagrets, Jörg Behler, Daniel Berger, Björn Bieniek, Jonas Björk, Volker Blum, Saeed Bohloul, Connor L. Box, Nicholas Boyer, Danilo Simoes Brambila, Gabriel A. Bramley, Kyle R. Bryenton, María Camarasa-Gómez, Christian Carbogno, Fabio Caruso, Sucismita Chutia, Michele Ceriotti, Gábor Csányi, William Dawson, Francisco A. Delesma , et al. (177 additional authors not shown)

Abstract: Electronic-structure theory is the foundation of the description of materials including multiscale modeling of their properties and functions. Obviously, without sufficient accuracy at the base, reliable predictions are unlikely at any level that follows. The software package FHI-aims has proven to be a game changer for accurate free-energy calculations because of its scalability, numerical precis… ▽ More Electronic-structure theory is the foundation of the description of materials including multiscale modeling of their properties and functions. Obviously, without sufficient accuracy at the base, reliable predictions are unlikely at any level that follows. The software package FHI-aims has proven to be a game changer for accurate free-energy calculations because of its scalability, numerical precision, and its efficient handling of density functional theory (DFT) with hybrid functionals and van der Waals interactions. It treats molecules, clusters, and extended systems (solids and liquids) on an equal footing. Besides DFT, FHI-aims also includes quantum-chemistry methods, descriptions for excited states and vibrations, and calculations of various types of transport. Recent advancements address the integration of FHI-aims into an increasing number of workflows and various artificial intelligence (AI) methods. This Roadmap describes the state-of-the-art of FHI-aims and advancements that are currently ongoing or planned. △ Less

Submitted 5 June, 2025; v1 submitted 30 April, 2025; originally announced May 2025.

Comments: arXiv admin note: Includes articles arXiv:2502.02460, arXiv:2501.02550, arXiv:2411.01680, arXiv:2501.16091, arXiv:2411.04951

Full realization of the RIBLL2 separator at the HIRFL-CSR facility

Authors: Xiao-Dong Xu, Yong Zheng, Zhi-Yu Sun, Yu-Nan Song, Bao-Hua Sun, Satoru Terashima, Chang-Jian Wang, Ge Guo, Guang-Shuai Li, Xiu-Lin Wei, Jun-Yao Xu, Ji-Chao Zhang, Yong Cao, Bing-Shui Gao, Jia-Xing Han, Jin-Rong Liu, Chen-Gui Lu, Shu-Ya Jin, Hooi Jin Ong, Hao-Tian Qi, Yun Qin, Ya-Zhou Sun, Isao Tanihata, Lu-Ping Wan, Kai-Long Wang , et al. (11 additional authors not shown)

Abstract: A new experimental platform was constructed at the Second Radioactive Ion Beam Line in Lanzhou (RIBLL2) of HIRFL-CSR accelerator facility at Lanzhou, China. Its performance, along with several newly developed detectors, was tested in two radioactive ion beam experiments utilizing a 400 MeV/u 40Ar beam and a 350 MeV/u 78Kr beam, respectively. The first results from these two experiments demonstrate… ▽ More A new experimental platform was constructed at the Second Radioactive Ion Beam Line in Lanzhou (RIBLL2) of HIRFL-CSR accelerator facility at Lanzhou, China. Its performance, along with several newly developed detectors, was tested in two radioactive ion beam experiments utilizing a 400 MeV/u 40Ar beam and a 350 MeV/u 78Kr beam, respectively. The first results from these two experiments demonstrate a good particle identification capability of the setup, thereby affirming the full realization of the RIBLL2 separator. △ Less

Submitted 30 April, 2025; originally announced May 2025.

Comments: 5 pages, 2 figures

Journal ref: Science Bulletin, 70, 1026-1029, (2025)

Photonic logic tensor computing beyond TOPS per core

Authors: Wenkai Zhang, Bo Wu, Wentao Gu, Hailong Zhou, Weida Hu, Ting He, Liao Chen, Wenchan Dong, Dongmei Huang, Yang Zhao, Wei Wang, Naidi Cui, Qiansheng Wang, Xi Xiao, Jianji Dong, Xinliang Zhang

Abstract: The soaring demand for computing resources has spurred great interest in photonic computing with higher speed and larger computing capacity. Photonic logic gates are of crucial importance due to the fundamental role of Boolean logic in modern digital computing systems. However, most photonic logic schemes struggle to exhibit the capability of massively parallel processing and flexible reconfigurat… ▽ More The soaring demand for computing resources has spurred great interest in photonic computing with higher speed and larger computing capacity. Photonic logic gates are of crucial importance due to the fundamental role of Boolean logic in modern digital computing systems. However, most photonic logic schemes struggle to exhibit the capability of massively parallel processing and flexible reconfiguration, owing to weak and fixed nonlinearity in optical elements. Here, we propose a photonic logic tensor computing architecture for the first time and fabricate the photonic universal logic tensor core (PULTC) with a parallel logic computing capacity beyond TOPS. Ten wavelength channels and four spatial channels are designed in PULTC, where the logic computing speed in each channel can reach 50 Gbit/s. After the nonlinear mapping of microring modulators, arbitrary logic operations can be achieved by configuring the Mach-Zehnder interferometer mesh. Our work offers an innovative route for photonic universal logic computing with high-parallel capability and propels the practical applications of photonic logic computing. △ Less

Submitted 28 April, 2025; originally announced April 2025.

Terahertz field effect in a two-dimensional semiconductor MoS2

Authors: Tomoki Hiraoka, Sandra Nestler, Wentao Zhang, Simon Rossel, Hassan A. Hafez, Savio Fabretti, Heike Schloerb, Andy Thomas, Dmitry Turchinovich

Abstract: Layered two-dimensional (2D) materials, with their atomic-scale thickness and tunable electronic, optical, and mechanical properties, open many promising pathways to significantly advance modern electronics. The field effect caused by a strong electric field, typically of MV/cm level, applied perpendicular to the material layers, is a highly effective method for controlling these properties. Field… ▽ More Layered two-dimensional (2D) materials, with their atomic-scale thickness and tunable electronic, optical, and mechanical properties, open many promising pathways to significantly advance modern electronics. The field effect caused by a strong electric field, typically of MV/cm level, applied perpendicular to the material layers, is a highly effective method for controlling these properties. Field effect allows the regulation of the electron flow in transistor channels, improves the photodetector efficiency and spectral range, and facilitates the exploration of novel exotic quantum phenomena in 2D materials. However, existing approaches to induce the field effect in 2D materials utilize circuit-based electrical gating methods fundamentally limited to microwave response rates. Device-compatible ultrafast, sub-picosecond control needed for modern technology and basic science applications still remains a challenge. In this study, we demonstrate such an ultrafast field effect in atomically thin MoS2, an archetypal 2D semiconductor, embedded in a hybrid 3D-2D terahertz nanoantenna structure. This nanoantenna efficiently converts an incident terahertz electric field into the vertical ultrafast gating field in MoS2 while simultaneously enhancing it to the required MV/cm level. We observe the terahertz field effect optically as coherent terahertz-induced Stark shift of characteristic exciton resonances in MoS2. Our results enable novel developments in technology and the fundamental science of 2D materials, where the terahertz field effect is crucial. △ Less

Submitted 22 April, 2025; originally announced April 2025.

Comments: Manuscript 16 pages 5 figures. Supplementary Information 50 pages

Journal ref: Nat. Commun. 16, 5235 (2025)

Attractive and repulsive angulons in superfluid environments

Authors: Wei Zhang, Zhongda Zeng, Tao Shi

Abstract: We investigate the in- and out-of-equilibrium phenomena of a rotational impurity -- specifically, a linear molecule -- coupled to a nonconventional environment, a helium nanodroplet. By employing a Lee-Low-Pines-like transformation combined with a multireference configuration approach, we self-consistently account for the molecule's backaction on the superfluid bath and accurately capture the comp… ▽ More We investigate the in- and out-of-equilibrium phenomena of a rotational impurity -- specifically, a linear molecule -- coupled to a nonconventional environment, a helium nanodroplet. By employing a Lee-Low-Pines-like transformation combined with a multireference configuration approach, we self-consistently account for the molecule's backaction on the superfluid bath and accurately capture the complex entanglement between the molecule's rotational degrees of freedom and the bath excitations. Our findings reveal that, in the ground state, the impurity induces a density defect in the superfluid bath, giving rise to two novel types of excited states: (a) attractive angulon states, analogous to bound states in photonic crystals and Yu-Shiba-Rusinov bound states in superconductors, localized within the density defect region; and (b) long-lived repulsive angulon states in dilute environments. Rotational spectroscopy demonstrates a crossover from repulsive to attractive angulon states as the bath density increases. This work paves the way for exploring novel nonequilibrium phenomena of quantum impurities in interacting environments. △ Less

Submitted 22 April, 2025; originally announced April 2025.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. A 111, 043317 (2025)

High-Dimensional Light Field Modulation via Conjugate Phase Encoding in Liquid Crystal Devices

Authors: Tian Xia, Quanzhou Long, Wanlong Zhang, Zhenwei Xie, Xiaocong Yuan

Abstract: High-dimensional light field modulation demands precise control over multiple optical parameters, a capability critical for next-generation photonic systems. While liquid crystals offer inherent advantages in dynamic birefringence tuning, existing approaches face fundamental limitations in decoupling interdependent phase responses across polarization states. Here, we demonstrate a conjugate phase… ▽ More High-dimensional light field modulation demands precise control over multiple optical parameters, a capability critical for next-generation photonic systems. While liquid crystals offer inherent advantages in dynamic birefringence tuning, existing approaches face fundamental limitations in decoupling interdependent phase responses across polarization states. Here, we demonstrate a conjugate phase encoding paradigm enabling simultaneous manipulation of wavelength-dependent wavefronts, orbital angular momentum (OAM), and polarization states in photoaligned liquid crystal devices. △ Less

Submitted 20 April, 2025; originally announced April 2025.

Mechanical Characterization of Brain Tissue: Experimental Techniques, Human Testing Considerations, and Perspectives

Authors: Jixin Hou, Kun Jiang, Arunachalam Ramanathan, Abhishek Saji Kumar, Wei Zhang, Lin Zhao, Taotao Wu, Ramana Pidaparti, Dajiang Zhu, Gang Li, Kenan Song, Tianming Liu, Mir Jalil Razavi, Ellen Kuhl, Xianqiao Wang

Abstract: Understanding the mechanical behavior of brain tissue is crucial for advancing both fundamental neuroscience and clinical applications. Yet, accurately measuring these properties remains challenging due to the brain unique mechanical attributes and complex anatomical structures. This review provides a comprehensive overview of commonly used techniques for characterizing brain tissue mechanical pro… ▽ More Understanding the mechanical behavior of brain tissue is crucial for advancing both fundamental neuroscience and clinical applications. Yet, accurately measuring these properties remains challenging due to the brain unique mechanical attributes and complex anatomical structures. This review provides a comprehensive overview of commonly used techniques for characterizing brain tissue mechanical properties, covering both invasive methods such as atomic force microscopy, indentation, axial mechanical testing, and oscillatory shear testing and noninvasive approaches like magnetic resonance elastography and ultrasound elastography. Each technique is evaluated in terms of working principles, applicability, representative studies, and experimental limitations. We further summarize existing publications that have used these techniques to measure human brain tissue mechanical properties. With a primary focus on invasive studies, we systematically compare their sample preparation, testing conditions, reported mechanical parameters, and modeling strategies. Key sensitivity factors influencing testing outcomes (e.g., sample size, anatomical location, strain rate, temperature, conditioning, and post-mortem interval) are also discussed. Additionally, selected noninvasive studies are reviewed to assess their potential for in vivo characterization. A comparative discussion between invasive and noninvasive methods, as well as in vivo versus ex vivo testing, is included. This review aims to offer practical guidance for researchers and clinicians in selecting appropriate mechanical testing approaches and contributes a curated dataset to support constitutive modeling of human brain tissue. △ Less

Submitted 20 April, 2025; v1 submitted 15 April, 2025; originally announced April 2025.

Scanning-free three-dimensional fluorescent dipoles imaging by polarization self-interference digital holography (pSIDH)

Authors: Tianlong Man, Wenxue Zhang, Lu Zhang, Ran Zheng, Hua Huang, Xinhui Liu, Hongqiang Zhou, Zhe Wang, Yuhong Wan

Abstract: Polarization microscopy provides insights into the structure and orientational organization of biomolecules and their architectures in cells. The above key functional signatures, which are natively 3D, can be only detected in 2D for a single measurement in conventional polarization microscopy. It is so far a challenging task to capture simultaneously the 3D structure and molecular orientation in a… ▽ More Polarization microscopy provides insights into the structure and orientational organization of biomolecules and their architectures in cells. The above key functional signatures, which are natively 3D, can be only detected in 2D for a single measurement in conventional polarization microscopy. It is so far a challenging task to capture simultaneously the 3D structure and molecular orientation in a single frame of far-field intensity distribution, within the timescale of rapid-happened spatial organization events of bio-complexes. We report an optical imaging method called pSIDH, to encode multidimensional sample information includes 3D structures and dipole orientations, in their far-field fluorescence-self-interference pattern. The computational reconstruction from the holographic extracted complex-valued light field provides optical-aberration-corrected 3D polarization images of the sample. In pSIDH microscope incorporating planar liquid crystal lens and high numerical aperture objective, we demonstrate scanning-free 3D volumetric polarization imaging of fluorescently-labelled sample, with simultaneously computational-improved system measuring accuracy on the 3D spatial and polarization dimensions. The pSIDH imaging on phalloidin-fluorophore labelling U2OS cells provides rapid tools of capturing simultaneous the 3D structural details and spatial-averaged molecular orientation distributions of biological complex architectures such as actin filaments. △ Less

Submitted 14 April, 2025; originally announced April 2025.

CIDR interpolation: an enhanced SSA-based temporal filling framework for restoring continuity in downscaled GRACE(-FO) TWSA products

Authors: Yu Gao, Wenyuan Zhang, Junyang Gou, Shubi Zhang, Yang Liu, Benedikt Soja

Abstract: Global total water storage anomaly (TWSA) products derived from the Gravity Recovery and Climate Experiment (GRACE) and its Follow-On mission (GRACE-FO) are critical for hydrological research and water resource management. However, persistent data gaps hinder their application in long-term water cycle monitoring. We propose a Correlation-based Iterative and Decompose-Restore (CIDR) interpolation m… ▽ More Global total water storage anomaly (TWSA) products derived from the Gravity Recovery and Climate Experiment (GRACE) and its Follow-On mission (GRACE-FO) are critical for hydrological research and water resource management. However, persistent data gaps hinder their application in long-term water cycle monitoring. We propose a Correlation-based Iterative and Decompose-Restore (CIDR) interpolation method to address the dual limitations of conventional Singular Spectrum Analysis (SSA) methods: instability caused by flawed iterative strategy and accuracy degradation due to inadequate denoising. CIDR solves the above issues with two key ways: (i) a correlation-driven iteration stopping rule ensuring the method's overall consistency, and (ii) component-specific interpolation with optimized denoising through a decompose-restore framework. The 0.5° downscaled GRACE(-FO) TWSA dataset was employed with artificial gaps replicating intra-mission and inter-mission scenarios to evaluate the method's performance. At the grid scale, the global average relative Root Mean Square (rRMS) and Nash-Sutcliffe Efficiency (NSE) improved by 17.5% and 42.6% compared to the SSA method for intra-mission gaps, and by 18.6% and 27.6% for inter-mission gap interpolation, respectively. In addition, the CIDR method shows a significant improvement over the SSA method within the global basins, with the global basin area-weighted average rRMS improved by 20.3% and 20% for both gaps, respectively. This research is expected to provide an advanced gap-filling method to meet the dual requirements of hydrological and climate research for high spatial resolution and long-term continuous TWSA products, which is universally applicable for other hydrological and geodetic time series. △ Less

Submitted 11 April, 2025; originally announced April 2025.

A data-driven convergence booster for accelerating and stabilizing pseudo time-stepping

Authors: Xukun Wang, Yilang Liu, Xiang Yang, Weiwei Zhang

Abstract: This paper introduces a novel data-driven convergence booster that not only accelerates convergence but also stabilizes solutions in cases where obtaining a steady-state solution is otherwise challenging. The method constructs a reduced-order model (ROM) of the solution residual using intermediate solutions and periodically solves a least-square problem in the low-dimensional ROM subspace. The sec… ▽ More This paper introduces a novel data-driven convergence booster that not only accelerates convergence but also stabilizes solutions in cases where obtaining a steady-state solution is otherwise challenging. The method constructs a reduced-order model (ROM) of the solution residual using intermediate solutions and periodically solves a least-square problem in the low-dimensional ROM subspace. The second-order approximation of the residual and the use of normal equation distinguish this work from similar approaches in the literature from the methodology perspective. From the application perspective, in contrast to prior studies that focus on linear systems or idealized problems, we rigorously assess the method's performance on realistic computational fluid dynamics (CFD) applications. In addition to reducing the time complexity of point-iterative solvers for linear systems, we demonstrate substantial reductions in the number of pseudo-time steps required for implicit schemes solving the nonlinear Navier-Stokes equations. Across a range of two- and three-dimensional flows-including subsonic inviscid and transonic turbulent cases-the method consistently achieves a 3 to 4 times speedup in wall-clock time. Lastly, the proposed method acts as a robust stabilizer, capable of converging to steady solutions in flows that would otherwise exhibit persistent unsteadiness-such as vortex shedding or transonic buffet-without relying on symmetry boundary conditions. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Comments: 19 pages, 10 figures

Mains-Synchronized Timing Trigger for Stability Enhancement in FEL Pulsed Microwave Systems

Authors: Jinfu Zhu, Hongli Ding, Haokui Li, Qiaoye Ran, Jiayue Yang, Weiqing Zhang

Abstract: Pulsed microwave stability in linear accelerators (LINACs) is critical for maintaining high-quality electron beams in synchrotron radiation and free-electron laser (FEL) facilities. This study establishes and validates a zero-crossing synchronization strategy to suppress mains-induced disturbances in the Dalian Coherent Light Source (DCLS) accelerator. Through comprehensive numerical simulations a… ▽ More Pulsed microwave stability in linear accelerators (LINACs) is critical for maintaining high-quality electron beams in synchrotron radiation and free-electron laser (FEL) facilities. This study establishes and validates a zero-crossing synchronization strategy to suppress mains-induced disturbances in the Dalian Coherent Light Source (DCLS) accelerator. Through comprehensive numerical simulations at 10 Hz, 20 Hz, and 25 Hz repetition rates, we first demonstrate the temporal evolution of microwave amplitude perturbations under mains power disturbances. Experimental validation with the digital Low-Level Radio Frequency (LLRF) system reveals a substantial similarity between simulated and measured interference patterns, confirming the susceptibility of the klystron output to mains power modulation. The developed synchronization technique integrates real-time mains zero-crossing detection with precision timing sequence generation, effectively decoupling the microwave system from power frequency fluctuations. It achieves remarkable inter-pulse stability improvements, reducing microwave amplitude fluctuation from ~0.30% RMS to 0.07% RMS. This approach not only addresses the inherent bandwidth limitations of conventional proportional-integral-derivative (PID) controllers in low-repetition-rate accelerators but also provides a solution for troubleshooting power-related instabilities in advanced light source facilities. △ Less

Submitted 7 April, 2025; originally announced April 2025.

Comments: 10 pages, 10 figures

Impact of helium ion irradiation on the thermal properties of superconducting nanowire single-photon detectors

Authors: Yi-Yu Hong, Yu-Ze Wang, Wei-Jun Zhang, Jia-Hao Hu, Jia-Min Xiong, Dong-Wei Chu, Xin Ou, Wen-Tao Wu, Xiao-Fu Zhang, Hui-Qin Yu, Pu-Sheng Yuan, Hao Li, Ling Wu, Zhen Wang, Li-Xing You

Abstract: SNSPDs are indispensable for applications ranging from quantum information processing to deep-space optical communications, owing to their high detection efficiency, low dark counts, and excellent timing resolution. However, further improving the intrinsic detection efficiency (IDE) remains crucial for optimizing SNSPD performance. Ion irradiation has recently emerged as a powerful post-fabricatio… ▽ More SNSPDs are indispensable for applications ranging from quantum information processing to deep-space optical communications, owing to their high detection efficiency, low dark counts, and excellent timing resolution. However, further improving the intrinsic detection efficiency (IDE) remains crucial for optimizing SNSPD performance. Ion irradiation has recently emerged as a powerful post-fabrication method to enhance SNSPD characteristics. Here, we studied the effects of He-ion irradiation on the thermal properties of NbN SNSPDs. We systematically examine the evolution of thermal boundary conductance as a function of ion fluence (0-1.1E17 ions/cm2), observing a 57% decrease from 127 to 54 W/m^2K^4 with increasing fluence, followed by saturation at approximately 9E16 ions/cm2. At this fluence, the minimum hotspot relaxation time measurements indicate a 41% increase, rising from 17 to 24 ps, while the electron-phonon interaction time extends by 14%, from 11.2 to 12.8 ps at 10 K. TEM reveals defect formation at the NbN/SiO2 interface (6-8 nm) and He-bubble formation within the SiO2 layer (30-260 nm), contributing to the extended thermal relaxation time. These irradiation-induced modifications play a key role in enhancing the IDE of the treated devices. We further demonstrate a post-irradiation SNSPD showing a saturated IDE plateau at 2000 nm from 2.7 K to 28 mK, enabled by thermal modifications and a weakly wavelength-dependent avalanche-assisted mechanism. Our findings highlight ion irradiation as a valuable tool for thermal tailoring in SNSPDs and advance the understanding of detection physics and defect engineering in superconducting optoelectronics. △ Less

Submitted 7 April, 2025; v1 submitted 3 April, 2025; originally announced April 2025.

Comments: 22 pages, 7 figures, 1 table

The Linear Collider Facility (LCF) at CERN

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S. Ampudia Castelazo, D. Angal-Kalinin, J. A. Anguiano, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, D. Attié, J. L. Avila-Jimenez, H. Baer, Y. Bai, C. Balazs, P. Bambade, T. Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive, S. Belomestnykh, Y. Benhammou , et al. (386 additional authors not shown)

Abstract: In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr… ▽ More In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC. △ Less

Submitted 19 June, 2025; v1 submitted 31 March, 2025; originally announced March 2025.

Comments: Submission to the ESPPU, as updated version May 26

Report number: DESY-25-054

Strain-induced non-relativistic altermagnetic spin splitting effect

Authors: Wancheng Zhang, Mingkun Zheng, Yong Liu, Rui Xiong, Zhenhua Zhang, Zhihong Lu

Abstract: Recently, the large time-reversal-odd ($\mathcal{T}$-odd) spin current generated by the non-relativistic altermagnetic spin splitting effect (ASSE) has demonstrated significant potential for spintronic applications, with both computational and experimental validations. However, considering the broad application prospects and the scarcity of conductive altermagnetic materials, the development of no… ▽ More Recently, the large time-reversal-odd ($\mathcal{T}$-odd) spin current generated by the non-relativistic altermagnetic spin splitting effect (ASSE) has demonstrated significant potential for spintronic applications, with both computational and experimental validations. However, considering the broad application prospects and the scarcity of conductive altermagnetic materials, the development of novel reliable methods for inducing altermagnetism is necessary. Here, strain engineering is proposed as a simple yet effective approach. This work focuses on $\mathrm{OsO}_2$--the $5d$ counterpart of $\mathrm{RuO}_2$ sharing the rutile structure--employing $ab~initio$ calculations to systematically investigate strain effects on its ASSE. We find that applying a minor equibiaxial tensile strain $\mathcal{E}_{\mathrm{ts}}$ to $\mathrm{OsO}_2$ can induce a transition from non-magnetic to altermagnetic states. Only $3\%$ $\mathcal{E}_{\mathrm{ts}}$ is required to achieve a spin-charge conversion ratio ($θ_{\text{AS}}$) of $\sim7\%$ for the $\mathcal{T}$-odd spin current generated by ASSE, far exceeding the intrinsic spin Hall angle $θ_{\text{IS}}$ produced by the conventional spin Hall effect (CSHE). Calculations reveal that substantial $θ_{\text{AS}}$ persists even in the absence of spin-orbit coupling, with its magnitude positively correlating to non-relativistic spin splitting magnitude, which further confirms the strain-induced ASSE's non-relativistic origin. Further calculations reveal that $\mathrm{RuO}_2$ exhibits analogous phenomena, which may resolve recent controversies regarding its magnetic properties. Our research opens new simple pathways for developing next-generation altermagnetic spintronic devices. △ Less

Submitted 14 April, 2025; v1 submitted 22 March, 2025; originally announced March 2025.

Absence of dehydration due to superionic transition at Earth's core-mantle boundary

Authors: Yu He, Wei Zhang, Qingyang Hu, Shichuan Sun, Jiaqi Hu, Daohong Liu, Li Zhou, Lidong Dai, Duck Young Kim, Yun Liu, Heping Li, Ho-kwang Mao

Abstract: The properties and stability of hydrous phases are key to unraveling the mysteries of the water cycle in Earth's interior. Under the deep lower mantle conditions, hydrous phases transition into a superionic state. However, the influence of the superionic effect on their stability and dehydration processes remains poorly understood. Using ab initio calculations and deep-learning potential molecular… ▽ More The properties and stability of hydrous phases are key to unraveling the mysteries of the water cycle in Earth's interior. Under the deep lower mantle conditions, hydrous phases transition into a superionic state. However, the influence of the superionic effect on their stability and dehydration processes remains poorly understood. Using ab initio calculations and deep-learning potential molecular dynamics simulations, we discovered a doubly superionic transition in delta-AlOOH, characterized by the highly diffusive behavior of ionic hydrogen and aluminum within the oxygen sub-lattice. These highly diffusive elements contribute significant external entropy into the system, resulting in exceptional thermostability. Free energy calculations indicate that dehydration is energetically and kinetically unfavorable when water exists in a superionic state under core-mantle boundary (CMB) conditions. Consequently, water can accumulate in the deep lower mantle over Earth's history. This deep water reservoir plays a crucial role in the global deep water and hydrogen cycles. △ Less

Submitted 22 March, 2025; originally announced March 2025.

Towards a Generalized SA Model: Symbolic Regression-Based Correction for Separated Flows

Authors: Xuxiang Sun, Xianglin Shan, Yilang Liu, Weiwei Zhang

Abstract: This study focuses on the numerical simulation of high Reynolds number separated flows and proposes a data-driven approach to improve the predictive capability of the SA turbulence model. First, data assimilation was performed on two typical airfoils with high angle-of-attack separated flows to obtain a high-fidelity flow field dataset. Based on this dataset, a white-box model was developed using… ▽ More This study focuses on the numerical simulation of high Reynolds number separated flows and proposes a data-driven approach to improve the predictive capability of the SA turbulence model. First, data assimilation was performed on two typical airfoils with high angle-of-attack separated flows to obtain a high-fidelity flow field dataset. Based on this dataset, a white-box model was developed using symbolic regression to modify the production term of the SA model. To validate the effectiveness of the modified model, multiple representative airfoils and wings, such as the SC1095 airfoil, DU91-W2-250 airfoil, and ONERA-M6 wing, were selected as test cases. A wide range of flow conditions was considered, including subsonic to transonic regimes, Reynolds numbers ranging from hundreds of thousands to tens of millions, and angles of attack varying from small to large. The results indicate that the modified model significantly improves the prediction accuracy of separated flows while maintaining the predictive capability for attached flows. It notably enhances the reproduction of separated vortex structures and flow separation locations, reducing the mean relative error in lift prediction at stall angles by 69.2% and improving computational accuracy by more than three times. Furthermore, validation using a zero-pressure-gradient flat plate case confirms the modified model's ability to accurately predict the turbulent boundary layer velocity profile and skin friction coefficient distribution. The findings of this study provide new insights and methodologies for the numerical simulation of high Reynolds number separated flows, contributing to more accurate modeling of complex flow phenomena in engineering applications. △ Less

Submitted 12 March, 2025; originally announced March 2025.

Stability Enhancement of a Self-Amplified Spontaneous Emission Free-electron Laser with Bunching Containment

Authors: Huaiqian Yi, Xiaofan Wang, Li Zeng, Yifan Liang, Weiqing Zhang

Abstract: The self-amplified spontaneous emission (SASE) mechanism, the fundamental operating principle of numerous free-electron laser (FEL) facilities, is driven by electron beam shot noise and leads to significant fluctuations in the output pulse energy. This study presents a robust method for improving pulse energy stability by incorporating a dispersion element that introduces longitudinal dispersion i… ▽ More The self-amplified spontaneous emission (SASE) mechanism, the fundamental operating principle of numerous free-electron laser (FEL) facilities, is driven by electron beam shot noise and leads to significant fluctuations in the output pulse energy. This study presents a robust method for improving pulse energy stability by incorporating a dispersion element that introduces longitudinal dispersion into the electron beam during the exponential growth phase of the SASE process. At this phase, the density modulation of the electron beam, characterized by the bunching factor, undergoes large fluctuations, resulting in substantial variations in the emitted radiation power. The introduction of longitudinal dispersion allows for controlled manipulation of the bunching distribution, suppressing fluctuations and enhancing pulse energy stability. The stabilization mechanism is explained in this paper, and its impact on the radiation properties is analyzed for both the standard SASE scheme and advanced lasing setups, such as a two-stage lasing process for two-color pulse generation, with the initial stage operating in SASE mode. △ Less

Submitted 7 March, 2025; originally announced March 2025.

Unraveling Antagonistic Collision-Controlled Reactivity in Energetic Molecular Perovskites with Deep Potential Molecular Dynamics

Authors: Ming-Yu Guo, Yun-Fan Yan, Pin Chen, Wei-Xiong Zhang

Abstract: The precise regulation of chemical decompositions in energetic materials, whether towards rapid ignition or stable endurance, requires atomic-scale principles governing reactivity, which remain elusive yet. Herein, we resolve this challenge through deep potential molecular dynamics (DPMD) simulations, uncovering a universal collision-control principle in energetic molecular perovskites,… ▽ More The precise regulation of chemical decompositions in energetic materials, whether towards rapid ignition or stable endurance, requires atomic-scale principles governing reactivity, which remain elusive yet. Herein, we resolve this challenge through deep potential molecular dynamics (DPMD) simulations, uncovering a universal collision-control principle in energetic molecular perovskites, $\text{(H}_{2}\text{dabco)B(ClO}_{4}\text{)}_{3}$, where $\text{H}_{2}\text{dabco}^{2+}$ = 1,4-diazabicyclo[2.2.2]octane-1,4-diium, B = $\text{Na}^{+}$, $\text{K}^{+}$, $\text{Rb}^{+}$, $\text{NH}_{4}^{+}$ for DAP-1, DAP-2, DAP-3 and DAP-4, respectively. Atomic-scale simulation with Arrhenius fitting for over 100-ps trajectories reveals that increasing B-site ionic radius ($\text{Na}^{+} < \text{K}^{+} < \text{Rb}^{+}$) simultaneously reduces both activation energy $E_{a}$, which enhances reactivity, and pre-exponential factor $A$ which suppresses collision probabilities for hydrogen transfer between site $X$ and site $A$, with sharply opposing kinetic consequences. This duality well explains the peak stability and insensitivity in $\text{K}^{+}$-based DAP-2, which optimally balance thermal endurance and collision dissipation. For ammonium-based DAP-4, though the radius of $\text{NH}_{4}^{+}$ is close to $\text{K}^{+}$, the reactive B-site cation triggers proton transfer that promotes $\text{C-H}$ bond rupture. By linking static cation radii to dynamic $E_{a}$-ln$(A)$ coupling, we rationalize non-monotonic decomposition temperatures ($\text{K}^{+} > \text{NH}_{4}^{+} > \text{Rb}^{+} > \text{Na}^{+}$) macroscopic stability and establishes cornerstones for universal energetic material design. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Quantum state discrimination in a $\mathcal{PT}$-symmetric system of a single trapped ion

Authors: Chenhao Zhu, Tingting Shi, Liangyu Ding, Zhiyue Zheng, Xiang Zhang, Wei Zhang

Abstract: We experimentally demonstrate an unambiguous quantum state discrimination of two qubit states under a non-Hermitian Hamiltonian with parity-time-reversal ($\mathcal{PT}$) symmetry in a single trapped $^{40}$Ca$^+$ ion. We show that any two non-orthogonal states can become orthogonal subjected to time evolution of a $\mathcal{PT}$-symmetric Hamiltonian in both the $\mathcal{PT}$-symmetry preserving… ▽ More We experimentally demonstrate an unambiguous quantum state discrimination of two qubit states under a non-Hermitian Hamiltonian with parity-time-reversal ($\mathcal{PT}$) symmetry in a single trapped $^{40}$Ca$^+$ ion. We show that any two non-orthogonal states can become orthogonal subjected to time evolution of a $\mathcal{PT}$-symmetric Hamiltonian in both the $\mathcal{PT}$-symmetry preserving and broken regimes, thus can be discriminated deterministically. For a given pair of candidate states, we show that the parameters of the Hamiltonian must be confined in a proper range, within which there exists an optimal choice to realize quantum brachistochrone for the fastest orthogonalization. Besides, we provide a clear geometric picture and some analytic results to understand the main conclusions. Our work shows a promising application of non-Hermitian physics in quantum information processing. △ Less

Submitted 28 February, 2025; originally announced February 2025.

Comments: 6 pages, 4 figures

A space-resolved visible spectrometer system using compact endoscopic optics for full vertical profile measurement of impurity line emissions in superconducting EAST tokamak

Authors: A. Hu, Y. Cheng, L. Zhang, S. Morita, J. Ma, M. Kobayashi, C. Zhou, J. Chen, Y. Cao, F. Zhang, W. Zhang, Z. Li, D. Mitnik, S. Wang, Y. Jie, G. Zuo, J. Qian, H. Liu, G. Xu, J. Hu, K. Lu, Y. Song

Abstract: In Experimental Advanced Superconducting Tokamak (EAST tokamak) with tungsten divertors and molybdenum first wall, lithiumization and boronization have been frequently carried out to improve the plasma performance, in particular, in long pulse discharges. A study on impurity behaviors of lithium, boron and tungsten atoms/ions in the edge plasma is then crucially important. For the purpose, a space… ▽ More In Experimental Advanced Superconducting Tokamak (EAST tokamak) with tungsten divertors and molybdenum first wall, lithiumization and boronization have been frequently carried out to improve the plasma performance, in particular, in long pulse discharges. A study on impurity behaviors of lithium, boron and tungsten atoms/ions in the edge plasma is then crucially important. For the purpose, a space-resolved visible spectrometer system has been newly developed to observe full vertical profiles over a length of 1.7m of impurity line emissions in wavelength range of 320-800nm. For the full vertical profile measurement compact endoscopic optics is employed with an optical fiber bundle for the system, which can be inserted into a 1.5m long extension tube called 'long nose', because the distance between the diagnostic port and plasma center is considerably long. Therefore, a quartz glass window mounted from the vacuum vessel side is designed to withstand the reverse pressure. A mechanical shutter is also designed to open at a large angle of 235 degree so that the viewing angle of nearby ports is not blocked. Two sets of the fiber bundle, 60-channel linear array and 11*10 channel planar array , with a length of 30m are attached to two sets of Czerny-Turner visible spectrometers for one-dimensional (1D) vertical profile measurement of core plasma and two-dimensional (2D) spectroscopy of divertor plasma, respectively. A complementary metal oxide semiconductor (CMOS) detector with 2048*2048 pixels is used for the visible spectrometers. A preliminary result on the full vertical profile is obtained for BII line emission at 703.19nm in the 1D system △ Less

Submitted 26 February, 2025; originally announced February 2025.

Quantum Imaging of Photonic Spin Texture in an OAM Beam with NV Centers in Diamond

Authors: Shoaib Mahmud, Wei Zhang, Farid Kalhor, Pronoy Das, Zubin Jacob

Abstract: Photonic spin texture (PST), the spatial distribution of the spin angular momentum (SAM) of light, is connected to unique properties of light, such as optical skyrmions and topological optical N-invariants. There has been recent progress on the generation and manipulation of PST using various methodologies. However, a challenge remains for the sub-wavelength characterization of PST. Here, we demon… ▽ More Photonic spin texture (PST), the spatial distribution of the spin angular momentum (SAM) of light, is connected to unique properties of light, such as optical skyrmions and topological optical N-invariants. There has been recent progress on the generation and manipulation of PST using various methodologies. However, a challenge remains for the sub-wavelength characterization of PST. Here, we demonstrate nitrogen-vacancy (NV) centers in diamond as nanoscale quantum sensors for imaging the PST of a beam with orbital angular momentum (OAM). Leveraging the coherent interaction between photon spin and NV center electron spin at cryogenic temperature (77 K), and using the Hahn-Echo magnetometry technique, we experimentally demonstrate the imprinting of the PST on the quantum phase of NV centers. Our work can lead to the development of a quantum imaging platform capable of characterization of the spin texture of light at sub-wavelength scales. △ Less

Submitted 25 February, 2025; originally announced February 2025.

Topology Design of Reconfigurable Intelligent Surfaces Based on Current Distribution and Otsu Image Segmentation

Authors: Zhen Zhang, Jun Wei Zhang, Hui Dong Li, Junhui Qiu, Lijie Wu, Wan Wan Cao, Ren Wang, Jia Nan Zhang, Qiang Cheng

Abstract: Miniaturization of reconffgurable intelligent surface RIS) elements is a crucial trend in the development of RISs. It not only facilitates the attainment of multifunctional integration but also promotes seamless amalgamation with other elements. The current on the RIS element plays a crucial role in determining the characteristics of the induced electromagnetic ffeld components. Segments with high… ▽ More Miniaturization of reconffgurable intelligent surface RIS) elements is a crucial trend in the development of RISs. It not only facilitates the attainment of multifunctional integration but also promotes seamless amalgamation with other elements. The current on the RIS element plays a crucial role in determining the characteristics of the induced electromagnetic ffeld components. Segments with high current intensity determine the performance of RIS elements. Carving the parts with strong current distribution density into the metal patch of RIS element structure can achieve miniaturization. Based on this insight, this work proposes a topology design method that leverages current distribution and image processing techniques to achieve efffcient miniaturization of the RIS elements. In this proposed method, we ffrst obtain the current distribution across different operational states and the period of the working frequency. Next, we employ the Otsu image segmentation method to extract relevant image information from the current distribution images of the RIS elements. Subsequently, we utilize linear mapping techniques to convert this image information into the structure of RIS elements. Then, based on the structure of the RIS elements, the Quasi-Newton optimization algorithm is utilized to obtain the parameters of the tunable device that correspond to various operational states. As a result, we successfully construct the structural topology of the RIS elements based on their current distribution, designing areas with strong current distribution as metal patches. To validate the performance of the proposed method, a 16 by 16 3-bit RIS was developed, fabricated and measured. Compared with existing RIS designs, the proportion of the top-layer metal patches is smaller, which provides the possibility for integrating other functions and devices. △ Less

Submitted 21 May, 2025; v1 submitted 25 February, 2025; originally announced February 2025.

Learning multi-phase flow and transport in fractured porous media with auto-regressive and recurrent graph neural networks

Authors: Mohammed Al Kobaisi, Wenjuan Zhang, Waleed Diab, Hadi Hajibeygi

Abstract: In the past three decades, a wide array of computational methodologies and simulation frameworks has emerged to address the complexities of modeling multi-phase flow and transport processes in fractured porous media. The conformal mesh approaches which explicitly align the computational grid with fracture surfaces are considered by many to be the most accurate. However, such methods require excess… ▽ More In the past three decades, a wide array of computational methodologies and simulation frameworks has emerged to address the complexities of modeling multi-phase flow and transport processes in fractured porous media. The conformal mesh approaches which explicitly align the computational grid with fracture surfaces are considered by many to be the most accurate. However, such methods require excessive fine-scale meshing, rendering them impractical for large or complex fracture networks. In this work, we propose to learn the complex multi-phase flow and transport dynamics in fractured porous media with graph neural networks (GNN). GNNs are well suited for this task due to the unstructured topology of the computation grid resulting from the Embedded Discrete Fracture Model (EDFM) discretization. We propose two deep learning architectures, a GNN and a recurrent GNN. Both networks follow a two-stage training strategy: an autoregressive one step roll-out, followed by a fine-tuning step where the model is supervised using the whole ground-truth sequence. We demonstrate that the two-stage training approach is effective in mitigating error accumulation during autoregressive model rollouts in the testing phase. Our findings indicate that both GNNs generalize well to unseen fracture realizations, with comparable performance in forecasting saturation sequences, and slightly better performance for the recurrent GNN in predicting pressure sequences. While the second stage of training proved to be beneficial for the GNN model, its impact on the recurrent GNN model was less pronounced. Finally, the performance of both GNNs for temporal extrapolation is tested. The recurrent GNN significantly outperformed the GNN in terms of accuracy, thereby underscoring its superior capability in predicting long sequences. △ Less

Submitted 22 February, 2025; originally announced February 2025.

Room-temperature field-tunable radiofrequency rectification in epitaxial SrIrO3 films

Authors: Liang Zhou, Zongzheng Du, Jinhua Wang, Pingbo Chen, Bicong Ye, Tao Feng, Jiahao Yang, Zehao Xiao, Meng Yang, Junxue Li, Wenqing Zhang, Hai-zhou Lu, Hongtao He

Abstract: Although significant advancements have been made in wireless technologies and portable devices, it remains a challenge for high-frequency and nanowatt-level radiofrequency rectification. In this work, we report a pronounced radiofrequency rectification up to 37 GHz in nominally centrosymmetric SrIrO3 epitaxial films, with the minimum detectable power as low as ~300 nanowatts. Strikingly, the SrIrO… ▽ More Although significant advancements have been made in wireless technologies and portable devices, it remains a challenge for high-frequency and nanowatt-level radiofrequency rectification. In this work, we report a pronounced radiofrequency rectification up to 37 GHz in nominally centrosymmetric SrIrO3 epitaxial films, with the minimum detectable power as low as ~300 nanowatts. Strikingly, the SrIrO3 rectifier is highly field-tunable and exhibits a strong in-plane field anisotropy, thus showing a unique advantage in broad-band radiofrequency rectification. The rectification effect can persist up to at least 360 K and shows a sensitive temperature dependence including a sign inversion. By a systematic study of the nonlinear transport properties of SrIrO3, it is further revealed that the radiofrequency rectification originates from the nonlinear Hall effect with the dominant contribution from field-induced Berry curvature dipole. Our work demonstrates the superior performance of the field-tunable SrIrO3 rectifiers, unleashing the great application potential of centrosymmetric materials in harvesting and detecting ambient electromagnetic energy. △ Less

Submitted 23 February, 2025; originally announced February 2025.

Comments: 4 figures

Enhanced response at exceptional points in multi-qubit systems for sensing

Authors: Tingting Shi, Vasilii Smirnov, Kaiye Shi, Wei Zhang

Abstract: Exceptional points featuring enhanced energy response to perturbation hold significant potential in detection and measurement of weak signals. Of particular interest is the existence and property of high-order exceptional points in quantum systems, owing to the capability to provide high-order response to perturbations. We investigate the exceptional points in a system of $n$ identical qubits poss… ▽ More Exceptional points featuring enhanced energy response to perturbation hold significant potential in detection and measurement of weak signals. Of particular interest is the existence and property of high-order exceptional points in quantum systems, owing to the capability to provide high-order response to perturbations. We investigate the exceptional points in a system of $n$ identical qubits possessing parity-time-reversal symmetry. We prove that owing to an incomplete coalescence of eigenstates, the highest possible order of exceptional point is $n+1$, which is also the upper bound of the order of energy response to perturbation. More interestingly, by considering an Ising-type interaction, we analytically prove that to achieve an $(m+1)$-th order response for any $m \le n$, the system must acquire a nontrivial $m$-body interaction. Finally, we propose a Floquet driving scheme to implement an effective multi-body Ising-type interaction, which can be realized in trapped ions or superconducting qubits. △ Less

Submitted 23 February, 2025; originally announced February 2025.

Comments: 9 pages, 4 figures

Journal ref: Phys. Rev. A 111, 032203 (2025)

Minibeam-pLATTICE: A novel proton LATTICE modality using minibeams

Authors: Nimita Shinde, Weijie Zhang, Yuting Lin, Hao Gao

Abstract: Purpose: LATTICE, a form of spatially fractionated radiation therapy that delivers high-dose peaks and low-dose valleys within the target, has been clinically utilized for treating bulky tumors. However, its application to small-to-medium-sized target remains challenging due to beam size limitations. To address this challenge, this work proposes a novel proton LATTICE (pLATTICE) modality using min… ▽ More Purpose: LATTICE, a form of spatially fractionated radiation therapy that delivers high-dose peaks and low-dose valleys within the target, has been clinically utilized for treating bulky tumors. However, its application to small-to-medium-sized target remains challenging due to beam size limitations. To address this challenge, this work proposes a novel proton LATTICE (pLATTICE) modality using minibeams, namely minibeam-pLATTICE, that extends LATTICE approach for small-to-medium targets. Methods: Three minibeam-pLATTICE methods are introduced. (1) M0: a fixed minibeam orientation for all beam angles; (2) M1: alternated minibeam orientations, for consecutive beam angles; (3) M2: multiple minibeam orientations for each beam angle. For each minibeam-pLATTICE method, an optimization problem is formulated to optimize dose uniformity in target peaks and valleys, as well as dose-volume-histogram-based objectives. This problem is solved using iterative convex relaxation and alternating direction method of multipliers. Results: Three minibeam-pLATTICE methods are validated to demonstrate the feasibility of minibeam-pLATTICE for head-and-neck cases. The advantages of this modality over conventional beam (CONV) pLATTICE are evaluated by comparing peak-to-valley dose ratio (PVDR) and dose delivered to organs at risk (OAR). All three minibeam-pLATTICE modalities achieved improved plan quality compared to CONV, with M2 yielding the best results. For example, in terms of PVDR, M2=5.89, compared to CONV=4.13, M0=4.87 and M1=4.7. Conclusion: A novel minibeam-pLATTICE modality is proposed that generates lattice dose patterns for small-to-medium targets, which are not achievable with conventional pLATTICE due to beam size limitations. △ Less

Submitted 26 February, 2025; v1 submitted 22 February, 2025; originally announced February 2025.

A mixed integer programming approach to minibeam aperture optimization for multi-collimator proton minibeam radiotherapy

Authors: Nimita Shinde, Weijie Zhang, Yuting Lin, Hao Gao

Abstract: Background: Multi-collimator proton minibeam radiation therapy (MC-pMBRT) has recently emerged as a versatile technique for dose shaping, enabling peak-valley dose patterns in organs-at-risk (OAR) while maintaining a uniform dose distribution in tumor. MC-pMBRT leverages a set of generic multi-slit collimators (MSC) with varying center-to-center distances. However, the current method for minibeam… ▽ More Background: Multi-collimator proton minibeam radiation therapy (MC-pMBRT) has recently emerged as a versatile technique for dose shaping, enabling peak-valley dose patterns in organs-at-risk (OAR) while maintaining a uniform dose distribution in tumor. MC-pMBRT leverages a set of generic multi-slit collimators (MSC) with varying center-to-center distances. However, the current method for minibeam aperture optimization (MAO), i.e., the selection of MSC per beam angle, is manual and heuristic, resulting in computational inefficiencies and no guarantee of optimality. This work introduces a novel mixed integer programming (MIP) approach to MAO for optimizing MC-pMBRT plan quality. Methods: The proposed MIP approach jointly optimizes dose distributions, peak-to-valley dose ratio (PVDR), and selects the optimal set of MSC per beam angle. The optimization problem includes decision variables for MSC selection per beam angle and spot weights. The proposed MIP approach is a two-step process: Step1: the binary variables are optimally determined to select MSC for each beam angle; Step 2: the continuous variables are solved to determine the spot weights. Both steps utilize iterative convex relaxation and the alternating direction method of multipliers to solve the problems. Results: The proposed MIP method for MAO (MIP-MAO) was validated against the conventional heuristic method (CONV) for MC-pMBRT treatment planning. Results indicate that MIP-MAO enhances the conformity index (CI) for the target and improves PVDR for OAR. For instance, in a head-and-neck case, CI improved from 0.61 (CONV) to 0.70 (MIP-MAO); in an abdomen case, CI improved from 0.78 (CONV) to 0.83 (MIP-MAO). Additionally, MIP-MAO reduced mean doses in the body and OAR. Conclusions: A novel MIP approach for MAO in MC-pMBRT is presented, showing demonstrated improvements in plan quality and PVDR compared to the heuristic method. △ Less

Submitted 22 February, 2025; originally announced February 2025.