-
Free energy of domain walls and order-disorder transition in a triangular lattice with anisotropic nearest-neighbor interactions
Authors:
Martina Tsvetanova,
Kai Sotthewes,
Harold J. W. Zandvliet
Abstract:
We have derived exact expressions for the domain wall free energy along the three high-symmetry directions of a triangular lattice with anisotropic nearest-neighbor interactions. The triangular lattice undergoes an orderdisorder phase transition at a temperature Tc given by exp(-(e1+e2)/2kTc)+ exp(-(e2+e3)/2kTc)+ exp(-(e3+e1)/2kTc)= 1, where e1, e2, e3 are the nearest-neighbor interaction energies…
▽ More
We have derived exact expressions for the domain wall free energy along the three high-symmetry directions of a triangular lattice with anisotropic nearest-neighbor interactions. The triangular lattice undergoes an orderdisorder phase transition at a temperature Tc given by exp(-(e1+e2)/2kTc)+ exp(-(e2+e3)/2kTc)+ exp(-(e3+e1)/2kTc)= 1, where e1, e2, e3 are the nearest-neighbor interaction energies, and e1+ e2> 0, e2+ e3> 0, e3+ e1> 0. Finally, we have derived expressions for the thermally induced meandering of the domain walls at temperatures below the phase transition temperature. We show how these expressions can be used to extract the interaction energies of two-dimensional systems with a triangular lattice.
△ Less
Submitted 29 May, 2022;
originally announced May 2022.
-
Droplet dissolution driven by emerging thermal gradients and Marangoni flow
Authors:
Binglin Zeng,
Yuliang Wang,
Christian Diddens,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The lifetime $τ$ of an isothermal and purely diffusively dissolving droplet in a host liquid scales as $τ\sim R_0^2$ with its initial radius $R_0$ [Langmuir, Phys. Rev. 12, 368 (1919)]. For a droplet dissolving due to natural convection driven by density differences, its lifetime scales as $τ\sim R_0^{5/4}$ [Dietrich et al., J. Fluid Mech. 794, 45 (2016)]. In this paper we experimentally find and…
▽ More
The lifetime $τ$ of an isothermal and purely diffusively dissolving droplet in a host liquid scales as $τ\sim R_0^2$ with its initial radius $R_0$ [Langmuir, Phys. Rev. 12, 368 (1919)]. For a droplet dissolving due to natural convection driven by density differences, its lifetime scales as $τ\sim R_0^{5/4}$ [Dietrich et al., J. Fluid Mech. 794, 45 (2016)]. In this paper we experimentally find and theoretically derive yet another droplet dissolution behavior, resulting in $τ\sim R_0^4$. It occurs when the dissolution dynamics is controlled by local heating of the liquid, leading to a modified solubility and a thermal Marangoni flow around the droplet. The thermal gradient is achieved by plasmonic heating of a gold nanoparticle decorated sample surface, on which a sessile water droplet immersed in water-saturated 1-butanol solution is sitting. The resulting off-wall thermal Marangoni flow and the temperature dependence of the solubility determine the droplet dissolution rate, resulting in a shrinkage $R(t) \sim (τ-t )^{1/4}$ of the droplet radius and thus in $τ\sim R_0^{4}$.
△ Less
Submitted 11 February, 2022;
originally announced February 2022.
-
Droplet plume emission during plasmonic bubble growth in ternary liquids
Authors:
Xiaolai Li,
Yibo Chen,
Yuliang Wang,
Kai Leong Chong,
Roberto Verzicco,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
Plasmonic bubbles are of great relevance in numerous applications, including catalytic reactions, micro/nanomanipulation of molecules or particles dispersed in liquids, and cancer therapeutics. So far, studies have been focused on bubble nucleation in pure liquids. Here we investigate plasmonic bubble nucleation in ternary liquids consisting of ethanol, water, and trans-anethole oil which can show…
▽ More
Plasmonic bubbles are of great relevance in numerous applications, including catalytic reactions, micro/nanomanipulation of molecules or particles dispersed in liquids, and cancer therapeutics. So far, studies have been focused on bubble nucleation in pure liquids. Here we investigate plasmonic bubble nucleation in ternary liquids consisting of ethanol, water, and trans-anethole oil which can show the so-called ouzo-effect. We find that oil (trans-anethole) droplet plumes are produced around the growing plasmonic bubbles. The nucleation of the microdroplets and their organization in droplet plumes is due to the symmetry breaking of the ethanol concentration field during the selective evaporation of ethanol from the surrounding ternary liquids into the growing plasmonic bubbles. Numerical simulations show the existence of a critical Marangoni number Ma (the ratio between solutal advection rate and the diffusion rate), above which the symmetry breaking of the ethanol concentration field occurs, leading to the emission of the droplet plumes. The numerical results agree with the experimental observation that more plumes are emitted with increasing ethanol-water relative weight ratios and hence Ma. Our findings on the droplet plume formation reveal the rich phenomena of plasmonic bubble nucleation in multicomponent liquids and help to pave the way to achieve enhanced mixing in multicomponent liquids in chemical, pharmaceutical, and cosmetic industries.
△ Less
Submitted 19 October, 2021;
originally announced October 2021.
-
Periodic bouncing of a plasmonic bubble in a binary liquid by competing solutal and thermal Marangoni forces
Authors:
Binglin Zeng,
Kai Leong Chong,
Yuliang Wang,
Christian Diddens,
Xiaolai Li,
Marvin Detert,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The physicochemical hydrodynamics of bubbles and droplets out of equilibrium, in particular with phase transitions, displays surprisingly rich and often counterintuitive phenomena. Here we experimentally and theoretically study the nucleation and early evolution of plasmonic bubbles in a binary liquid consisting of water and ethanol. Remarkably, the submillimeter plasmonic bubble is found to be pe…
▽ More
The physicochemical hydrodynamics of bubbles and droplets out of equilibrium, in particular with phase transitions, displays surprisingly rich and often counterintuitive phenomena. Here we experimentally and theoretically study the nucleation and early evolution of plasmonic bubbles in a binary liquid consisting of water and ethanol. Remarkably, the submillimeter plasmonic bubble is found to be periodically attracted to and repelled from the nanoparticle-decorated substrate, with frequencies of around a few kHz. We identify the competition between solutal and thermal Marangoni forces as origin of the periodic bouncing. The former arises due to the selective vaporization of ethanol at the substrate's side of the bubble, leading to a solutal Marangoni flow towards the hot substrate, which pushes the bubble away. The latter arises due to the temperature gradient across the bubble, leading to a thermal Marangoni flow away from the substrate which sucks the bubble towards it. We study the dependence of the frequency of the bouncing phenomenon from the control parameters of the system, namely the ethanol fraction and the laser power for the plasmonic heating. Our findings can be generalized to boiling and electrolytically or catalytically generated bubbles in multicomponent liquids.
△ Less
Submitted 20 April, 2021;
originally announced April 2021.
-
Giant plasmonic bubbles nucleation under different ambient pressures
Authors:
Binglin Zeng,
Yuliang Wang,
Mikhail E. Zaytsev,
Chenliang Xia,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
Water-immersed gold nanoparticles irradiated by a laser can trigger the nucleation of plasmonic bubbles after a delay time of a few microseconds [Wang et al., Proc. Natl. Acad. Sci. USA 122, 9253,(2018)]. Here we systematically investigated the light-vapor conversion efficiency, η, of these plasmonic bubbles as a function of the ambient pressure. The efficiency of the formation of these initial-ph…
▽ More
Water-immersed gold nanoparticles irradiated by a laser can trigger the nucleation of plasmonic bubbles after a delay time of a few microseconds [Wang et al., Proc. Natl. Acad. Sci. USA 122, 9253,(2018)]. Here we systematically investigated the light-vapor conversion efficiency, η, of these plasmonic bubbles as a function of the ambient pressure. The efficiency of the formation of these initial-phase and mainly water-vapor containing bubbles, which is defined as the ratio of the energy that is required to form the vapor bubbles and the total energy dumped in the gold nanoparticles before nucleation of the bubble by the laser, can be as high as 25%. The amount of vaporized water first scales linearly with the total laser energy dumped in the gold nanoparticles before nucleation, but for larger energies the amount of vaporized water levels off. The efficiency η decreases with increasing ambient pressure. The experimental observations can be quantitatively understood within a theoretical framework based on the thermal diffusion equation and the thermal dynamics of the phase transition.
△ Less
Submitted 29 December, 2020;
originally announced January 2021.
-
Plasmonic Microbubble Dynamics in Binary Liquids
Authors:
Xiaolai Li,
Yuliang Wang,
Binglin Zeng,
Marvin Detert,
Andrea Prosperetti,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The growth of surface plasmonic microbubbles in binary water/ethanol solutions is experimentally studied. The microbubbles are generated by illuminating a gold nanoparticle array with a continuous wave laser. Plasmonic bubbles exhibit ethanol concentration-dependent behaviors. For low ethanol concentrations (f_e) of < 67.5%, bubbles do not exist at the solid-liquid interface. For high f_e values o…
▽ More
The growth of surface plasmonic microbubbles in binary water/ethanol solutions is experimentally studied. The microbubbles are generated by illuminating a gold nanoparticle array with a continuous wave laser. Plasmonic bubbles exhibit ethanol concentration-dependent behaviors. For low ethanol concentrations (f_e) of < 67.5%, bubbles do not exist at the solid-liquid interface. For high f_e values of >80%, the bubbles behave as in pure ethanol. Only in an intermediate window of 67.5% < f_e < 80% do we find sessile plasmonic bubbles with a highly nontrivial temporal evolution, in which as a function of time three phases can be discerned. (1) In the first phase, the microbubbles grow, while wiggling. (2) As soon as the wiggling stops, the microbubbles enter the second phase in which they suddenly shrink, followed by (3) a steady reentrant growth phase. Our experiments reveal that the sudden shrinkage of the microbubbles in the second regime is caused by a depinning event of the three phase contact line. We systematically vary the ethanol concentration, laser power, and laser spot size to unravel water recondensation as the underlying mechanism of the sudden bubble shrinkage in phase 2.
△ Less
Submitted 1 January, 2021;
originally announced January 2021.
-
Gas-Vapor Interplay in Plasmonic Bubble Shrinkage
Authors:
Mikhail E. Zaytsev,
Yuliang Wang,
Yuhang Zhang,
Guillaume Lajoinie,
Xuehua Zhang,
Andrea Prosperetti,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The understanding of the shrinkage dynamics of plasmonic bubbles formed around metallic nanoparticles immersed in liquid and irradiated by a resonant light source is crucial for the usage of these bubbles in numerous applications. In this paper we experimentally show and theoretically explain that a plasmonic bubble during its shrinkage undergoes two different phases: first, a rapid partial bubble…
▽ More
The understanding of the shrinkage dynamics of plasmonic bubbles formed around metallic nanoparticles immersed in liquid and irradiated by a resonant light source is crucial for the usage of these bubbles in numerous applications. In this paper we experimentally show and theoretically explain that a plasmonic bubble during its shrinkage undergoes two different phases: first, a rapid partial bubble shrinkage governed by vapor condensation and, second, a slow diffusion-controlled bubble dissolution. The history of the bubble formation plays an important role in the shrinkage dynamics during the first phase, as it determines the gas-vapor ratio in the bubble composition. Higher laser powers lead to more vaporous bubbles, while longer pulses and higher dissolved air concentrations lead to more gaseous bubbles. The dynamics of the second phase barely depends on the history of bubble formation, i.e. laser power and pulse duration, but strongly on the dissolved air concentration, which defines the concentration gradient at the bubble interface. Finally, for the bubble dissolution in the second phase, with decreasing dissolved air concentration, we observe a gradual transition from a $R(t) \propto (t_0 - t) ^{1/3}$ scaling law to a $R(t) \propto (t_0 - t) ^{1/2}$ scaling law, where $t_0$ is the lifetime of the bubble and theoretically explain this transition.
△ Less
Submitted 23 April, 2020;
originally announced April 2020.
-
Entrapment and Dissolution of Microbubbles Inside Microwells
Authors:
Xiaolai Li,
Yuliang Wang,
Binglin Zeng,
Yanshen Li,
Huanshu Tan,
Harold J. W. Zandvliet,
Xuehua Zhang,
Detlef Lohse
Abstract:
The formation and evolution of immersed surface micro- and nanobubbles are essential in various practical applications, such as the usage of superhydrophobic rematerials, drug delivery, and mineral flotation. In this work, we investigate the entrapment of microbubbles on a hydrophobic surface, structured with microwells, when water flow passes along, and the subsequent microbubble dissolution. At…
▽ More
The formation and evolution of immersed surface micro- and nanobubbles are essential in various practical applications, such as the usage of superhydrophobic rematerials, drug delivery, and mineral flotation. In this work, we investigate the entrapment of microbubbles on a hydrophobic surface, structured with microwells, when water flow passes along, and the subsequent microbubble dissolution. At entrapment, the microbubble is initially pinned at the edge of the microwell. At some point, the three-phase contact line detaches from one side of the edge and separates from the wall, after which it further recedes. We systematically investigate the evolution of the footprint diameter and the contact angle of the entrapped microbubbles, which reveals that the dissolution process is in the constant contact angle mode. By varying the gas undersaturation level, we quantify how a high gas undersaturation enhances the dissolution process, and compare with simplified theoretical predictions for dissolving bubbles on a plane surface. We find that geometric partial blockage effects of the diffusive flux out of the microbubble trapped in the microwell lead to reduced dissolution rates.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Plasmonic Bubble Nucleation and Growth in Water: Effect of Dissolved Air
Authors:
Xiaolai Li,
Yuliang Wang,
Mikhail E. Zaytsev,
Guillaume Lajoinie,
Hai Le The,
Johan G. Bomer,
Jan C. T. Eijkel,
Harold J. W. Zandvliet,
Xuehua Zhang,
Detlef Lohse
Abstract:
Under continuous laser irradiation, noble metal nanoparticles immersed in water can quickly heat up, leading to the nucleation of so-called plasmonic bubbles. In this work, we want to further understand the bubble nucleation and growth mechanism. In particular, we quantitatively study the effect of the amount of dissolved air on the bubble nucleation and growth dynamics, both for the initial giant…
▽ More
Under continuous laser irradiation, noble metal nanoparticles immersed in water can quickly heat up, leading to the nucleation of so-called plasmonic bubbles. In this work, we want to further understand the bubble nucleation and growth mechanism. In particular, we quantitatively study the effect of the amount of dissolved air on the bubble nucleation and growth dynamics, both for the initial giant bubble, which forms shortly after switching on the laser and is mainly composed of vapor, and for the final life phase of the bubble, during which it mainly contains air expelled from water. We found that the bubble nucleation temperature depends on the gas concentration: the higher the gas concentration, the lower the bubble nucleation temperature. Also, the long-term diffusiondominated bubble growth is governed by the gas concentration. The radius of the bubbles grows as R(t)~t^1/3 for airequilibrated and air-oversaturated water. In contrast, in partially degassed water, the growth is much slower since, even for the highest temperature we achieve, the water remains undersaturated.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Evaporation of dilute sodium dodecyl sulfate droplets on a hydrophobic substrate
Authors:
Wojciech Kwieciński,
Tim Segers,
Sjoerd van der Werf,
Arie van Houselt,
Detlef Lohse,
Harold J. W. Zandvliet,
Stefan Kooij
Abstract:
Evaporation of surfactant laden sessile droplets is omnipresent in nature and industrial applications such as inkjet printing. Soluble surfactants start to form micelles in an aqueous solution for surfactant concentrations exceeding the critical micelle concentration (CMC). Here, the evaporation of aqueous sodium dodecyl sulfate (SDS) sessile droplets on hydrophobic surfaces were experimentally in…
▽ More
Evaporation of surfactant laden sessile droplets is omnipresent in nature and industrial applications such as inkjet printing. Soluble surfactants start to form micelles in an aqueous solution for surfactant concentrations exceeding the critical micelle concentration (CMC). Here, the evaporation of aqueous sodium dodecyl sulfate (SDS) sessile droplets on hydrophobic surfaces were experimentally investigated for SDS concentrations ranging from 0.025 to 1 CMC. In contrast to the constant contact angle of an evaporating sessile water droplet, we observed that, at the same surface the contact angle of an SDS laden droplet with a concentration below 0.5 CMC first decreases, then increases, and finally decreases resulting in a local contact angle minimum. Surprisingly, the minimum contact angle was found to be substantially lower than the static receding contact angle and it decreased with decreasing initial SDS concentration. Furthermore, the bulk SDS concentration at the local contact angle minimum was found to decrease with a decrease in the initial SDS concentration. The location of the observed contact angle minimum relative to the normalized evaporation time and its minimum value proved to be independent of both the relative humidity and the droplet volume and thus, of the total evaporation time. We discuss the observed contact angle dynamics in terms of the formation of a disordered layer of SDS molecules on the substrate at concentrations below 0.5 CMC. The present work underlines the complexity of the evaporation of sessile liquid-surfactant droplets and the influence of surfactant-substrate interactions on the evaporation process.
△ Less
Submitted 26 August, 2019;
originally announced September 2019.
-
Plasmonic Bubbles in n-Alkanes
Authors:
Mikhail E. Zaytsev,
Guillaume Lajoinie,
Yuliang Wang,
Detlef Lohse,
Harold J. W. Zandvliet,
Xuehua Zhang
Abstract:
In this paper we study the formation of microbubbles upon the irradiation of an array of plasmonic Au nanoparticles with a laser in n-alkanes ($C_{n}H_{2n+2}$, with n = 5-10). Two different phases in the evolution of the bubbles can be distinguished. In the first phase, which occurs after a delay time τd of about 100 μs, an explosive microbubble, reaching a diameter in the range from 10 μm to 100…
▽ More
In this paper we study the formation of microbubbles upon the irradiation of an array of plasmonic Au nanoparticles with a laser in n-alkanes ($C_{n}H_{2n+2}$, with n = 5-10). Two different phases in the evolution of the bubbles can be distinguished. In the first phase, which occurs after a delay time τd of about 100 μs, an explosive microbubble, reaching a diameter in the range from 10 μm to 100 μm, is formed. The exact size of this explosive microbubble barely depends on the carbon chain length of the alkane, but only on the laser power $P_l$. With increasing laser power, the delay time prior to bubble nucleation as well as the size of the microbubble both decrease. In the second phase, which sets in right after the collapse of the explosive microbubble, a new bubble forms and starts growing due to the vaporization of the surrounding liquid, which is highly gas rich. The final bubble size in this second phase strongly depends on the alkane chain length, namely it increases with decreasing number of carbon atoms. Our results have important implications for using plasmonic heating to control chemical reactions in organic solvents.
△ Less
Submitted 9 January, 2019;
originally announced March 2019.
-
Giant and explosive plasmonic bubbles by delayed nucleation
Authors:
Yuliang Wang,
Mikhail E. Zaytsev,
Guillaume Lajoinie,
Hai Le The,
Jan C. T. Eijkel,
Albert van den Berg,
Michel Versluis,
Bert M. Weckhuysen,
Xuehua Zhang,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
When illuminated by a laser, nano particles immersed in water can very quickly and strongly heat up, leading to the nucleation of so called vapor bubbles, which have huge application potential in e.g. solar light-harvesting, catalysis, and for medical applications.Whilst the long-time behavior of such bubbles has been well-studied, here, by employing ultra-high-speed imaging, we reveal the nucleat…
▽ More
When illuminated by a laser, nano particles immersed in water can very quickly and strongly heat up, leading to the nucleation of so called vapor bubbles, which have huge application potential in e.g. solar light-harvesting, catalysis, and for medical applications.Whilst the long-time behavior of such bubbles has been well-studied, here, by employing ultra-high-speed imaging, we reveal the nucleation and early life phase of these bubbles. After some delay time after beginning of the illumination, a giant bubble explosively grows, up to a maximal radius of 80 um, and collapses again within 200 us (bubble life phase 1). The maximal bubble volume remarkably increases with decreasing laser power P. To explain this behavior, we measure the delay time from the beginning of the illumination up to nucleation,which drastically increases with decreasing laser power, leading to less total dumped energy . This dumped energy E shows a universal linear scaling relation. This finding supports that the initial giant bubble is a pure vapor bubble. In contrast, the delay time does depend on the gas concentration of the water, as gas pockets in the water facilitate an earlier vapor bubble nucleation, which leads to smaller delay times and lower bubble nucleation temperatures. After the collapse of the initial giant bubbles, first much smaller oscillating bubbles form out of the remaining gas nuclei (bubble life phase 2, up to typically 10 ms). Subsequently the known vaporization dominated growth phase takes over and the bubble stabilizes (life phase 3). In the final life phase 4 the bubble slowly grows by gas expelling due to heating of the surrounding. Our findings on the explosive growth and collapse during the early life phase of a vapor bubble have strong bearings on possible applications of such bubbles, affecting their risk assessment.
△ Less
Submitted 12 March, 2019; v1 submitted 4 March, 2019;
originally announced March 2019.
-
Germanene termination of Ge${_2}$Pt crystals on Ge(110)
Authors:
P. Bampoulis,
L. Zhang,
A. Safaei,
R. van Gastel,
B. Poelsema,
H. J. W. Zandvliet
Abstract:
We have investigated the growth of Pt on Ge(110) using scanning tunneling microscopy and spectroscopy. The deposition of several monolayers of Pt on Ge(110) followed by annealing at 1100 K results in the formation of three-dimensional metallic Pt-Ge nanocrystals. The outermost layer of these crystals exhibits a honeycomb structure. The honeycomb structure is composed of two hexagonal sub-lattices…
▽ More
We have investigated the growth of Pt on Ge(110) using scanning tunneling microscopy and spectroscopy. The deposition of several monolayers of Pt on Ge(110) followed by annealing at 1100 K results in the formation of three-dimensional metallic Pt-Ge nanocrystals. The outermost layer of these crystals exhibits a honeycomb structure. The honeycomb structure is composed of two hexagonal sub-lattices that are displaced vertically by 0.2 Å with respect to each other. The nearest-neighbor distance of the atoms in the honeycomb lattice is 2.5${\pm}$0.1 Å, i.e. very close to the predicted nearest-neighbor distance in germanene (2.4 Å). Scanning tunneling spectroscopy reveals that the atomic layer underneath the honeycomb layer is more metallic than the honeycomb layer itself. These observations are in line with a model recently proposed for metal di-(silicides/)germanides: a hexagonal crystal with metal layers separated by semiconductor layers with a honeycomb lattice. Based on our observations we propose that the outermost layer of the Ge2Pt nanocrystal is a germanene layer.
△ Less
Submitted 2 June, 2017;
originally announced June 2017.
-
Hydrophobic Ice Confined between Graphene and MoS2
Authors:
Pantelis Bampoulis,
Vincent J. Teernstra,
Detlef Lohse,
Harold J. W. Zandvliet,
Bene Poelsema
Abstract:
The structure and nature of water confined between hydrophobic molybdenum disulfide (MoS2) and graphene (Gr) are investigated at room temperature by means of atomic force microscopy. We find the formation of two-dimensional (2D) crystalline ice layers. In contrast to the hexagonal ice 'bilayers' of bulk ice, these 2D crystalline ice phases consist of two planar hexagonal layers. Additional water c…
▽ More
The structure and nature of water confined between hydrophobic molybdenum disulfide (MoS2) and graphene (Gr) are investigated at room temperature by means of atomic force microscopy. We find the formation of two-dimensional (2D) crystalline ice layers. In contrast to the hexagonal ice 'bilayers' of bulk ice, these 2D crystalline ice phases consist of two planar hexagonal layers. Additional water condensation leads to either lateral expansion of the ice layers or to the formation of three-dimensional water droplets on top or at the edges of the two-layer ice, indicating that water does not wet these planar ice films. The results presented here are in line with a recent theory suggesting that water confined between hydrophobic walls forms 2D crystalline two-layer ice with a nontetrahedral geometry and intrahydrogen bonding. The lack of dangling bonds on either surface of the ice film gives rise to a hydrophobic character. The unusual geometry of these ice films is of great potential importance in biological systems with water in direct contact with hydrophobic surfaces.
△ Less
Submitted 2 June, 2017;
originally announced June 2017.
-
Exposing nanobubble-like objects to a degassed environment
Authors:
Robin P. Berkelaar,
Erik Dietrich,
Gerard A. M. Kip,
E. Stefan Kooij,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The primary attribute of interest of surface nanobubbles is their unusual stability and a number of theories trying to explain this have been put forward. Interestingly, the dissolution of nanobubbles is a topic that did not receive a lot of attention yet. In this work we applied two different experimental procedures which should cause gaseous nanobubbles to completely dissolve. In our experiments…
▽ More
The primary attribute of interest of surface nanobubbles is their unusual stability and a number of theories trying to explain this have been put forward. Interestingly, the dissolution of nanobubbles is a topic that did not receive a lot of attention yet. In this work we applied two different experimental procedures which should cause gaseous nanobubbles to completely dissolve. In our experiments we nucleated nanobubble-like objects by putting a drop of water on HOPG using a plastic syringe and disposable needle. In method A, the nanobubble-like objects were exposed to a flow of degassed water (1.17 mg/l) for 96 hours. In method B, the ambient pressure was lowered in order to degas the liquid and the nanobubble-like objects. Interestingly, the nanobubble-like objects remained stable after exposure to both methods. After thorough investigation of the procedures and materials used during our experiments, we found that the nanobubble-like object were induced by the use of disposable needles in which PDMS contaminated the water. It is very important for the nanobubble community to be aware of the fact that, although features look and behave like nanobubbles, in some cases they might in fact be or induced by contamination. The presence of contamination could also resolve some inconsistencies found in the nanobubble literature.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
Stick-jump mode in surface droplet dissolution
Authors:
Erik Dietrich,
E. Stefan Kooij,
Xuehua Zhang,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The analogy between evaporating surface droplets in air to dissolving long-chain alcohol droplets in water is worked out. We show that next to the three known modi for surface droplet evaporation or dissolution (constant contact angle mode, constant contact radius mode, and stick-slide mode), a fourth mode exists for small droplets on supposedly smooth substrates, namely the stick-jump mode: inter…
▽ More
The analogy between evaporating surface droplets in air to dissolving long-chain alcohol droplets in water is worked out. We show that next to the three known modi for surface droplet evaporation or dissolution (constant contact angle mode, constant contact radius mode, and stick-slide mode), a fourth mode exists for small droplets on supposedly smooth substrates, namely the stick-jump mode: intermittent contact line pinning causes the droplet to switch between sticking and jumping during the dissolution. We present experimental data and compare them to theory to predict the dissolution time in this stick-jump mode. We also explain why these jumps were easily observed for microscale droplets but not for larger droplets.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
Particle tracking around surface nanobubbles
Authors:
Erik Dietrich,
Harold J. W. Zandvliet,
Detlef Lohse,
James R. T. Seddon
Abstract:
The exceptionally long lifetime of surface nanobubbles remains one of the biggest questions in the field. One of the proposed mechanisms for the stability is the \emph{dynamic equilibrium} model, which describes a constant flux of gas in and out of the bubble. Here, we describe results from particle tracking experiments to measure this flow. The results are analysed by measuring the Voronoï cell s…
▽ More
The exceptionally long lifetime of surface nanobubbles remains one of the biggest questions in the field. One of the proposed mechanisms for the stability is the \emph{dynamic equilibrium} model, which describes a constant flux of gas in and out of the bubble. Here, we describe results from particle tracking experiments to measure this flow. The results are analysed by measuring the Voronoï cell size distribution, the diffusion, and speed of the tracer particles. We show that there is no detectable difference in the movement of particles above nanobubble-laden surfaces, as compared to nanobubble-free surfaces.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
Latent heat induced rotation limited aggregation in 2D ice nanocrystals
Authors:
Pantelis Bampoulis,
Martin H. Siekman,
E. Stefan Kooij,
Detlef Lohse,
Harold J. W. Zandvliet,
Bene Poelsema
Abstract:
The basic science responsible for the fascinating shapes of ice crystals and snowflakes is still not understood. Insufficient knowledge of the interaction potentials and the lack of relevant experimental access to the growth process are to blame for this failure. Here, we study the growth of fractal nanostructures in a two-dimensional (2D) system, intercalated between mica and graphene. Based on o…
▽ More
The basic science responsible for the fascinating shapes of ice crystals and snowflakes is still not understood. Insufficient knowledge of the interaction potentials and the lack of relevant experimental access to the growth process are to blame for this failure. Here, we study the growth of fractal nanostructures in a two-dimensional (2D) system, intercalated between mica and graphene. Based on our Scanning Tunneling Spectroscopy (STS) data we provide compelling evidence that these fractals are 2D ice. They grow while they are in material contact with the atmosphere at 20 $^{\circ}$C and without significant thermal contact to the ambient. The growth is studied in-situ, in real time and space at the nanoscale. We find that the growing 2D ice nanocrystals assume a fractal shape, which is conventionally attributed to Diffusion Limited Aggregation (DLA). However, DLA requires a low mass density mother phase, in contrast to the actual currently present high mass density mother phase. Latent heat effects and consequent transport of heat and molecules are found to be key ingredients for understanding the evolution of the snow (ice) flakes. We conclude that not the local availability of water molecules (DLA), but rather them having the locally required orientation is the key factor for incorporation into the 2D ice nanocrystal. In combination with the transport of latent heat we attribute the evolution of fractal 2D ice nanocrystals to local temperature dependent Rotation Limited Aggregation (RLA). The ice growth occurs under extreme supersaturation, i.e. the conditions closely resemble the natural ones for the growth of complex 2D snow (ice) flakes and we consider our findings crucial for solving the 'perennial' snow (ice) flake enigma.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
Role of natural convection in the dissolution of sessile droplets
Authors:
Erik Dietrich,
Sander Wildeman,
Claas Willem Visser,
Kevin Hofhuis,
E. Stefan Kooij,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The dissolution process of small (initial (equivalent) radius $R_0 < 1$ mm) long-chain alcohol (of various types) sessile droplets in water is studied, disentangling diffusive and convective contributions. The latter can arise for high solubilities of the alcohol, as the density of the alcohol-water mixture is then considerably less as that of pure water, giving rise to buoyancy driven convection.…
▽ More
The dissolution process of small (initial (equivalent) radius $R_0 < 1$ mm) long-chain alcohol (of various types) sessile droplets in water is studied, disentangling diffusive and convective contributions. The latter can arise for high solubilities of the alcohol, as the density of the alcohol-water mixture is then considerably less as that of pure water, giving rise to buoyancy driven convection. The convective flow around the droplets is measured, using micro-particle image velocimetry ($μ$PIV) and the schlieren technique. When nondimensionalizing the system, we find a universal $Sh\sim Ra^{1/4}$ scaling relation for all alcohols (of different solubilities) and all droplets in the convective regime. Here Sh is the Sherwood number (dimensionless mass flux) and Ra the Rayleigh number (dimensionless density difference between clean and alcohol-saturated water). This scaling implies the scaling relation $τ_c \sim R^{5/4}$ of the convective dissolution time $τ_c$, which is found to agree with experimental data. We show that in the convective regime the plume Reynolds number (the dimensionless velocity) of the detaching alcohol-saturated plume follows $Re_p \sim Sc^{-1} Ra^{5/8}$, which is confirmed by the $μ$PIV data. Here, Sc is the Schmidt number. The convective regime exists when $Ra > Ra_t$, where $Ra_t = 12$ is the transition Ra-number as extracted from the data. For $Ra < Ra_t$ and smaller, convective transport is progressively overtaken by diffusion and the above scaling relations break down.
△ Less
Submitted 24 May, 2016; v1 submitted 20 January, 2016;
originally announced January 2016.
-
Surface nanobubbles: Seeing is believing
Authors:
Stefan Karpitschka,
Erik Dietrich,
James R. T. Seddon,
Harold J. W. Zandvliet,
Detlef Lohse,
Hans Riegler
Abstract:
The existence of surface nanobubbles has been previously suggested using various experimental techniques, including attenuated total reflection spectroscopy, quartz crystal microbalance, neutron reflectometry, and x-ray reflectivity, but all of these techniques provide a sole number to quantify the existence of gas over (usually) hundreds of square microns. Thus `nanobubbles' are indistinguishable…
▽ More
The existence of surface nanobubbles has been previously suggested using various experimental techniques, including attenuated total reflection spectroscopy, quartz crystal microbalance, neutron reflectometry, and x-ray reflectivity, but all of these techniques provide a sole number to quantify the existence of gas over (usually) hundreds of square microns. Thus `nanobubbles' are indistinguishable from a `uniform gassy layer' between surface and liquid. Atomic force microscopy, on the other hand, does show the existence of surface nanobubbles, but the highly intrusive nature of the technique means that a uniform gassy layer could break down into nanobubbles \textit{due to} the motion of the microscope's probe. Here we demonstrate \textit{optical} visualisation of surface nanobubbles, thus validating their individual existence non-intrusively.
△ Less
Submitted 17 April, 2012;
originally announced April 2012.
-
Surface bubble nucleation phase space
Authors:
James R. T. Seddon,
E. Stefan Kooij,
Bene Poelsema,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
Recent research has revealed several different techniques for nanoscopic gas nucleation on submerged surfaces, with findings seemingly in contradiction with each other. In response to this, we have systematically investigated the occurrence of surface nanobubbles on a hydrophobised silicon substrate for various different liquid temperatures and gas concentrations, which we controlled independently…
▽ More
Recent research has revealed several different techniques for nanoscopic gas nucleation on submerged surfaces, with findings seemingly in contradiction with each other. In response to this, we have systematically investigated the occurrence of surface nanobubbles on a hydrophobised silicon substrate for various different liquid temperatures and gas concentrations, which we controlled independently. We found that nanobubbles occupy a distinct region of this phase space, occurring for gas concentrations of approximately 100-110%. Below the nanobubble phase we did not detect any gaseous formations on the substrate, whereas micropancakes (micron wide, nanometer high gaseous domains) were found at higher temperatures and gas concentrations. We moreover find that supersaturation of dissolved gases is not a requirement for nucleation of bubbles.
△ Less
Submitted 26 October, 2010;
originally announced November 2010.
