Showing 1–50 of 75 results for author: Yuan, W

In-flight calibration of the Lobster Eye Imager for Astronomy

Authors: Huaqing Cheng, Hai-Wu Pan, Yuan Liu, Jingwei Hu, Haonan Yang, Donghua Zhao, Zhixing Ling, He-Yang Liu, Yifan Chen, Xiaojin Sun, Longhui Li, Ge Jin, Chen Zhang, Shuang-Nan Zhang, Weimin Yuan

Abstract: The Lobster Eye Imager for Astronomy (LEIA), as a pathfinder of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe (EP) satellite, is the first lobster-eye focusing X-ray telescope with a considerably large field-of-view (FoV) ever flown. During the two and half years of operations, a series of calibration observations were performed, to fully characterize its performance and calibrat… ▽ More The Lobster Eye Imager for Astronomy (LEIA), as a pathfinder of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe (EP) satellite, is the first lobster-eye focusing X-ray telescope with a considerably large field-of-view (FoV) ever flown. During the two and half years of operations, a series of calibration observations were performed, to fully characterize its performance and calibrate the instrumental properties. In this paper, we present the results of the in-flight calibration campaign of LEIA, focusing on the properties of the PSF, source positional accuracy, effective area, energy response and the instrumental background. The calibration sources used are the Crab nebula, Sco X-1 and Cassiopeia A supernova remnant. Specifically, it is found that the spatial resolution remains almost unchanged compared to the pre-launch values, ranging from 3.6'-9.3' with a median of 5.9'. The post-calibration source positional accuracy is found to be ~2' (at the 90% C.L.). The Crab spectra can be well reproduced by the absorbed power-law model with the best-fit parameters in large agreement with the literature values, indicating that the in-orbit effective area is overall consistent with the model predictions and ground measurements. The effective area exhibits a systematic of $\lesssim10\%$ (at the 68% C.L.), and a mild deterioration of ~15% at the lower energy end after one year of operation. The Cas A spectral analysis shows that the energy scale and spectral resolution of the detectors are generally consistent with ground values. The instrumental background is found to be largely consistent among the four detectors, with strong modulations by the geomagnetic activity and the spectrum qualitatively consistent with our previous simulations. These instrumental performances well meet the design requirements. This work paves the way for the in-orbit calibration of the EP-WXT. △ Less

Submitted 25 June, 2025; originally announced June 2025.

Comments: 14 pages, 14 figures, 2 tables. Submitted to Astronomy & Astrophysics

Ground Calibration Result of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe

Authors: Huaqing Cheng, Chen Zhang, Zhixing Ling, Xiaojin Sun, Shengli Sun, Yuan Liu, Yanfeng Dai, Zhenqing Jia, Haiwu Pan, Wenxin Wang, Donghua Zhao, Yifan Chen, Zhiwei Cheng, Wei Fu, Yixiao Han, Junfei Li, Zhengda Li, Xiaohao Ma, Yulong Xue, Ailiang Yan, Qiang Zhang, Yusa Wang, Xiongtao Yang, Zijian Zhao, Longhui Li , et al. (2 additional authors not shown)

Abstract: We report on results of the on-ground X-ray calibration of the Wide-field X-ray Telescope (WXT) built from novel lobster-eye micro-pore optics, onboard the Einstein Probe (EP) satellite. To fully characterize the instrumental performance and properties, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module before the launch of E… ▽ More We report on results of the on-ground X-ray calibration of the Wide-field X-ray Telescope (WXT) built from novel lobster-eye micro-pore optics, onboard the Einstein Probe (EP) satellite. To fully characterize the instrumental performance and properties, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module before the launch of EP. In this paper, we present the calibration results of three flight model modules (FM1, FM5 and FM11) obtained during their end-to-end module calibration experiments carried out at the 100-m X-ray Test Facility (100XF) of IHEP, CAS. Measurements of the Point Spread Function (PSF), effective area, and energy response were performed for multiple incident directions and several characteristic X-ray emission line energies. Specifically, the distributions of the PSF and effective areas are found to be roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. Their energy dependence behavior aligns well with theoretical predictions and Monte Carlo simulations. At 1.25 keV, the full width at half maximum (FWHM) of the focal spot is in range of 3-7 arcmin (a median of 4.2) and the effective area in range of 2-3 $cm^2$. Noticeably, the flight model instruments demonstrate a $\sim1.5$ arcmin spatial resolution improvement over the previously launched Lobster Eye Imager for Astronomy. The properties of the complementary metal-oxide semiconductor (CMOS) sensors were also calibrated. The gain coefficients are in range of 6.4-6.9 eV/DN. The energy resolutions are in range of 120-140 eV at 1.25 keV, meeting design requirements. These calibration results have been ingested into the first version of calibration database (CALDB) and applied to the analysis of the scientific data acquired by WXT after the launch of EP. △ Less

Submitted 24 May, 2025; originally announced May 2025.

Comments: 28 pages, 18 figures, 2 tables. submitted to Experimental Astronomy

Extreme Loss Suppression and Wide Tunability of Dipolar Interactions in an Ultracold Molecular Gas

Authors: Weijun Yuan, Siwei Zhang, Niccolò Bigagli, Haneul Kwak, Claire Warner, Tijs Karman, Ian Stevenson, Sebastian Will

Abstract: Ultracold dipolar molecules hold great promise for the creation of novel quantum states of matter, but the realization of long-lived molecular bulk samples with strong dipole-dipole interactions has remained elusive. Here, we realize a collisionally stable gas of ultracold ground state molecules with a lifetime of several seconds. Utilizing double microwave dressing, we achieve an extreme suppress… ▽ More Ultracold dipolar molecules hold great promise for the creation of novel quantum states of matter, but the realization of long-lived molecular bulk samples with strong dipole-dipole interactions has remained elusive. Here, we realize a collisionally stable gas of ultracold ground state molecules with a lifetime of several seconds. Utilizing double microwave dressing, we achieve an extreme suppression of inelastic two- and three-body losses by factors of more than 10,000 and 1,000, respectively. We find that losses remain suppressed across a wide range of dipole-dipole interactions, allowing the continuous tuning of the dipolar length from 0 to 1 um $\sim$ 20,000 $a_0$. Combined with the recent realization of Bose-Einstein condensation of dipolar molecules, our findings open the door to the exploration of strongly dipolar quantum liquids. △ Less

Submitted 13 May, 2025; originally announced May 2025.

Comments: 7 pages, 5 figures

European Contributions to Fermilab Accelerator Upgrades and Facilities for the DUNE Experiment

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase o… ▽ More The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase of the project with a 1.2 MW neutrino beam. Construction of this first phase is well underway. For DUNE Phase II, this will be closely followed by an upgrade of the beam power to > 2 MW, for which the European groups again have a key role and which will require the continued support of the European community for machine aspects of neutrino physics. Beyond the neutrino beam aspects, LBNF is also responsible for providing unique infrastructure to install and operate the DUNE neutrino detectors at FNAL and at the Sanford Underground Research Facility (SURF). The cryostats for the first two Liquid Argon Time Projection Chamber detector modules at SURF, a contribution of CERN to LBNF, are central to the success of the ongoing execution of DUNE Phase I. Likewise, successful and timely procurement of cryostats for two additional detector modules at SURF will be critical to the success of DUNE Phase II and the overall physics program. The DUNE Collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This paper is being submitted to the 'Accelerator technologies' and 'Projects and Large Experiments' streams. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and DUNE software and computing, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

DUNE Software and Computing Research and Development

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing res… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing resources, and successful research and development of software (both infrastructure and algorithmic) in order to achieve these scientific goals. This submission discusses the computing resources projections, infrastructure support, and software development needed for DUNE during the coming decades as an input to the European Strategy for Particle Physics Update for 2026. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Computing' stream focuses on DUNE software and computing. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

The DUNE Phase II Detectors

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Detector instrumentation' stream focuses on technologies and R&D for the DUNE Phase II detectors. Additional inputs related to the DUNE science program, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 29 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

Double Microwave Shielding

Authors: Tijs Karman, Niccolò Bigagli, Weijun Yuan, Siwei Zhang, Ian Stevenson, Sebastian Will

Abstract: We develop double microwave shielding, which has recently enabled evaporative cooling to the first Bose-Einstein condensate of polar molecules [Bigagli et al., Nature 631, 289 (2024)]. Two microwave fields of different frequency and polarization are employed to effectively shield polar molecules from inelastic collisions and three-body recombination. Here, we describe in detail the theory of doubl… ▽ More We develop double microwave shielding, which has recently enabled evaporative cooling to the first Bose-Einstein condensate of polar molecules [Bigagli et al., Nature 631, 289 (2024)]. Two microwave fields of different frequency and polarization are employed to effectively shield polar molecules from inelastic collisions and three-body recombination. Here, we describe in detail the theory of double microwave shielding. We demonstrate that double microwave shielding effectively suppresses two- and three-body losses. Simultaneously, dipolar interactions and the scattering length can be flexibly tuned, enabling comprehensive control over interactions in ultracold gases of polar molecules. We show that this approach works universally for a wide range of molecules. This opens the door to studying many-body physics with strongly interacting dipolar quantum matter. △ Less

Submitted 26 May, 2025; v1 submitted 14 January, 2025; originally announced January 2025.

Long-term stability of scientific X-ray CMOS detectors

Authors: Mingjun Liu, Qinyu Wu, Zhixing Ling, Chen Zhang, Weimin Yuan, Shuang-Nan Zhang

Abstract: In recent years, complementary metal-oxide-semiconductor (CMOS) sensors have been demonstrated to have significant potential in X-ray astronomy, where long-term reliability is crucial for space X-ray telescopes. This study examines the long-term stability of a scientific CMOS sensor, focusing on its bias, dark current, readout noise, and X-ray spectral performance. The sensor was initially tested… ▽ More In recent years, complementary metal-oxide-semiconductor (CMOS) sensors have been demonstrated to have significant potential in X-ray astronomy, where long-term reliability is crucial for space X-ray telescopes. This study examines the long-term stability of a scientific CMOS sensor, focusing on its bias, dark current, readout noise, and X-ray spectral performance. The sensor was initially tested at -30 $^\circ$C for 16 months, followed by accelerated aging at 20 $^\circ$C. After a total aging period of 610 days, the bias map, dark current, readout noise, gain, and energy resolution exhibited no observable degradation. There are less than 50 pixels within the 4 k $\times$ 4 k array which show a decrease of the bias under 50 ms integration time by over 10 digital numbers (DNs). First-order kinetic fitting of the gain evolution predicts a gain degeneration of 0.73% over 3 years and 2.41% over 10 years. These results underscore the long-term reliability of CMOS sensors for application in space missions. △ Less

Submitted 19 December, 2024; originally announced December 2024.

Comments: 17 pages, 7 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2025)

A machine learning enhanced discontinuous Galerkin method for simulating transonic airfoil flow-fields

Authors: Yiwei Feng, Lili Lv, Weixiong Yuan, Liang Xu, Tiegang Liu

Abstract: Accurate and rapid prediction of flow-fields is crucial for aerodynamic design. This work proposes a discontinuous Galerkin method (DGM) whose performance enhances with increasing data, for rapid simulation of transonic flow around airfoils under various flow conditions. A lightweight and continuously updated data-driven model is built offline to predict the roughly correct flow-field, and the DGM… ▽ More Accurate and rapid prediction of flow-fields is crucial for aerodynamic design. This work proposes a discontinuous Galerkin method (DGM) whose performance enhances with increasing data, for rapid simulation of transonic flow around airfoils under various flow conditions. A lightweight and continuously updated data-driven model is built offline to predict the roughly correct flow-field, and the DGM is then utilized to refine the detailed flow structures and provide the corrected data. During the construction of the data-driven model, a zonal proper orthogonal decomposition (POD) method is designed to reduce the dimensionality of flow-field while preserving more near-wall flow features, and a weighted-distance radial basis function (RBF) is constructed to enhance the generalization capability of flow-field prediction. Numerical results demonstrate that the lightweight data-driven model can predict the flow-field around a wide range of airfoils at Mach numbers ranging from 0.7 to 0.95 and angles of attack from -5 to 5 degrees by learning from sparse data, and maintains high accuracy of the location and essential features of flow structures (such as shock waves). In addition, the machine learning (ML) enhanced DGM is able to significantly improve the computational efficiency and simulation robustness as compared to normal DGMs in simulating transonic inviscid/viscous airfoil flow-fields on arbitrary grids, and further enables rapid aerodynamic evaluation of numerous sample points during the surrogate-based aerodynamic optimization. △ Less

Submitted 14 November, 2024; originally announced November 2024.

Comments: 32 pages, 16 figures

MSC Class: 65N30; 68U20; 68T42 ACM Class: J.2; I.2

The track-length extension fitting algorithm for energy measurement of interacting particles in liquid argon TPCs and its performance with ProtoDUNE-SP data

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, N. S. Alex, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos , et al. (1348 additional authors not shown)

Abstract: This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy los… ▽ More This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy loss as a function of the energy, including models of electron recombination and detector response. The algorithm can be used to measure the energies of particles that interact before they stop, such as charged pions that are absorbed by argon nuclei. The algorithm's energy measurement resolutions and fractional biases are presented as functions of particle kinetic energy and number of track hits using samples of stopping secondary charged pions in data collected by the ProtoDUNE-SP detector, and also in a detailed simulation. Additional studies describe the impact of the dE/dx model on energy measurement performance. The method described in this paper to characterize the energy measurement performance can be repeated in any LArTPC experiment using stopping secondary charged pions. △ Less

Submitted 26 December, 2024; v1 submitted 26 September, 2024; originally announced September 2024.

Report number: FERMILAB-PUB-24-0561-LBNF-PPD, CERN-EP-2024-256

DUNE Phase II: Scientific Opportunities, Detector Concepts, Technological Solutions

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1347 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos. △ Less

Submitted 22 August, 2024; originally announced August 2024.

Report number: FERMILAB-TM-2833-LBNF

First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1341 additional authors not shown)

Abstract: ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each… ▽ More ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Report number: CERN-EP-2024-211, FERMILAB-PUB-24-0216-V

Journal ref: Phys. Rev. D 110, (2024) 092011

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

Report number: FERMILAB-PUB-24-0319-LBNF

Three-Body Recombination of Ultracold Microwave-Shielded Polar Molecules

Authors: Ian Stevenson, Shayamal Singh, Ahmed Elkamshishy, Niccoló Bigagli, Weijun Yuan, Siwei Zhang, Chris H. Greene, Sebastian Will

Abstract: A combined experimental and theoretical study is carried out on the three-body recombination process in a gas of microwave-shielded polar molecules. For ground-state polar molecules dressed with a strong microwave field, field-linked bound states can appear in the intermolecular potential. We model three-body recombination into such bound states using classical trajectory calculations. Our results… ▽ More A combined experimental and theoretical study is carried out on the three-body recombination process in a gas of microwave-shielded polar molecules. For ground-state polar molecules dressed with a strong microwave field, field-linked bound states can appear in the intermolecular potential. We model three-body recombination into such bound states using classical trajectory calculations. Our results show that recombination can explain the enhanced loss rates observed at small microwave detunings in trapped samples of bosonic NaCs [Bigagli, $\textit{et al.}$, Nat. Phys. $\textbf{19}$ 1579-1584 (2023)]. Specifically, our calculations reproduce the experimentally measured three-body loss rates across a wide range of microwave Rabi couplings, detunings, and temperatures. This work suggests that for bosonic shielded molecular systems in which the two-body loss is sufficiently suppressed and a field-linked bound state is present, the dominant loss process will be three-body recombination. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. Lett. 133, 263402 (2024)

Dressed-State Spectroscopy and Magic Trapping of Microwave-Shielded NaCs Molecules

Authors: Siwei Zhang, Weijun Yuan, Niccolò Bigagli, Claire Warner, Ian Stevenson, Sebastian Will

Abstract: We report on the optical polarizability of microwave-shielded ultracold NaCs molecules in an optical dipole trap. While dressing a pair of rotational states with a microwave field, we observe a marked dependence of the optical polarizability on the intensity and detuning of the dressing field. To precisely characterize differential energy shifts between dressed rotational states, we establish dres… ▽ More We report on the optical polarizability of microwave-shielded ultracold NaCs molecules in an optical dipole trap. While dressing a pair of rotational states with a microwave field, we observe a marked dependence of the optical polarizability on the intensity and detuning of the dressing field. To precisely characterize differential energy shifts between dressed rotational states, we establish dressed-state spectroscopy. For strong dressing fields, we find that a magic rotational transition can be engineered and demonstrate its insensitivity to laser intensity fluctuations. The results of this work have direct relevance for evaporative cooling and the recent demonstration of molecular Bose-Einstein condensates [Bigagli, et al., Nature (2024)] and may open a door to precision microwave spectroscopy in interacting many-body systems of microwave-shielded molecules. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 133, 263401 (2024)

Laboratory-scale Perpendicular Collisionless Shock Generation and Ion Acceleration in Magnetized Head-on Colliding Plasmas

Authors: P. Liu, D. Wu, D. W. Yuan, G. Zhao, Z. M. Sheng, X. T. He, J. Zhang

Abstract: Magnetized collisionless shocks drive particle acceleration broadly in space and astrophysics. We perform the first large-scale particle-in-cell simulations with realistic laboratory parameters (density, temperature, and velocity) to investigate the magnetized shock in head-on colliding plasmas with an applied magnetic field of tens of Tesla. It is shown that a perpendicular collisionless shock is… ▽ More Magnetized collisionless shocks drive particle acceleration broadly in space and astrophysics. We perform the first large-scale particle-in-cell simulations with realistic laboratory parameters (density, temperature, and velocity) to investigate the magnetized shock in head-on colliding plasmas with an applied magnetic field of tens of Tesla. It is shown that a perpendicular collisionless shock is formed with about fourfold density jump when two pre-magnetized flows collide. This shock is also characterized by rapid increase of neutron yield, triggered by the beam-beam nuclear reactions between injected deuterons and ones reflected by the shock. Distinct from the shocks arising from the interaction of injected flows with a magnetized background, the self-generated magnetic field in this colliding plasmas experiences a significant amplification due to the increasing diamagnetic current, approximately 30 times of upstream magnetic field. Moreover, we find that ions, regardless of whether they pass through or are reflected by the shock, can gain energy by the shock surfing acceleration, generating a power-law energy spectrum. In addition, we also demonstrate that the shock mediated only by filamentation instability cannot be generated under the prevailing unmagnetized experimental parameters. These results provide a direct connection of astrophysical field amplification to the magnetized shock formation and nonthermal ion generation. △ Less

Submitted 22 May, 2024; originally announced May 2024.

In-tube micro-pyramidal silicon nanopore for inertial-kinetic sensing of single molecules

Authors: Jianxin Yang, Tianle Pan, Zhenming Xie, Wu Yuan, Ho-Pui Ho

Abstract: Electrokinetic force has been the major choice for driving the translocation of molecules through a nanopore. However, the use of this approach is limited by an uncontrollable translocation speed, resulting in non-uniform conductance signals with low conformational sensitivity, which hinders the accurate discrimination of the molecules. Here, we show the first use of inertial-kinetic translocation… ▽ More Electrokinetic force has been the major choice for driving the translocation of molecules through a nanopore. However, the use of this approach is limited by an uncontrollable translocation speed, resulting in non-uniform conductance signals with low conformational sensitivity, which hinders the accurate discrimination of the molecules. Here, we show the first use of inertial-kinetic translocation induced by spinning an in-tube micro-pyramidal silicon nanopore fabricated using photovoltaic electrochemical etch-stop technique for biomolecular sensing. By adjusting the kinetic properties of a funnel-shaped centrifugal force field while maintaining a counter-balanced state of electrophoretic and electroosmotic effect in the nanopore, we achieved regulated translocation of proteins and obtained stable signals of long and adjustable dwell times and high conformational sensitivity. Moreover, we demonstrated instantaneous sensing and discrimination of molecular conformations and longitudinal monitoring of molecular reactions and conformation changes by wirelessly measuring characteristic features in current blockade readouts using the in-tube nanopore device. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Radiation Effects on Scientific CMOS Detectors for X-ray Astronomy: II. Total Ionizing Dose Irradiation

Authors: Mengxi Chen, Zhixing Ling, Mingjun Liu, Qinyu Wu, Chen Zhang, Jiaqiang Liu, Zhenlong Zhang, Weimin Yuan, Shuang-Nan Zhang

Abstract: Complementary metal-oxide-semiconductor (CMOS) detectors are a competitive choice for current and upcoming astronomical missions. To understand the performance variations of CMOS detectors in space environment, we investigate the total ionizing dose effects on custom-made large-format X-ray CMOS detectors. Three CMOS detector samples were irradiated with a Co-60 source with a total dose of 70 krad… ▽ More Complementary metal-oxide-semiconductor (CMOS) detectors are a competitive choice for current and upcoming astronomical missions. To understand the performance variations of CMOS detectors in space environment, we investigate the total ionizing dose effects on custom-made large-format X-ray CMOS detectors. Three CMOS detector samples were irradiated with a Co-60 source with a total dose of 70 krad and 105 krad. We test and compare the performance of these detectors before and after irradiation. After irradiation, the dark current increases by roughly 20 to 100 times, and the readout noise increases from 3 e- to 6 e-. The bias level at 50 ms integration time decreases by 13 to 18 Digital Number (DN) at -30 degree. The energy resolution increases from about 150 eV to about 170 eV at 4.5 keV at -30 degree. The conversion gain of the detectors varies for less than 2% after the irradiation. Furthermore, there are about 50 pixels whose bias at 50 ms has changed by more than 20 DN after the exposure to the radiation and about 30 to 140 pixels whose readout noise has increased by over 20 e- at -30 degree at 50 ms integration time. These results demonstrate that the performances of large-format CMOS detectors do not suffer significant degeneration in space environment. △ Less

Submitted 23 March, 2024; originally announced March 2024.

Comments: accepted by JATIS

Ion Kinetics and Neutron Generation Associated with Electromagnetic Turbulence in Laboratory-scale Counter-streaming Plasmas

Authors: P. Liu, D. Wu, T. X. Hu, D. W. Yuan, G. Zhao, Z. M. Sheng, X. T. He, J. Zhang

Abstract: Electromagnetic turbulence and ion kinetics in counter-streaming plasmas hold great significance in laboratory astrophysics, such as turbulence field amplification and particle energization. Here, we quantitatively demonstrate for the first time how electromagnetic turbulence affects ion kinetics under achievable laboratory conditions (millimeter-scale interpenetrating plasmas with initial velocit… ▽ More Electromagnetic turbulence and ion kinetics in counter-streaming plasmas hold great significance in laboratory astrophysics, such as turbulence field amplification and particle energization. Here, we quantitatively demonstrate for the first time how electromagnetic turbulence affects ion kinetics under achievable laboratory conditions (millimeter-scale interpenetrating plasmas with initial velocity of $2000\ \mathrm{km/s}$, density of $4 \times 10^{19}\ \mathrm{cm}^{-3}$, and temperature of $100\ \mathrm{eV}$) utilizing a recently developed high-order implicit particle-in-cell code without scaling transformation. It is found that the electromagnetic turbulence is driven by ion two-stream and filamentation instabilities. For the magnetized scenarios where an applied magnetic field of tens of Tesla is perpendicular to plasma flows, the growth rates of instabilities increase with the strengthening of applied magnetic field, which therefore leads to a significant enhancement of turbulence fields. Under the competition between the stochastic acceleration due to electromagnetic turbulence and collisional thermalization, ion distribution function shows a distinct super-Gaussian shape, and the ion kinetics are manifested in neutron yields and spectra. Our results have well explained the recent unmagnetized experimental observations, and the findings of magnetized scenario can be verified by current astrophysical experiments. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: Accepted by Phys. Rev. Lett. on 12 Mar

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1297 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 2 August, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 36 pages, 20 figures. Corrected author list; corrected typos across paper and polished text

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

Formation Mechanism of Laser-Driven Magnetized "Pillars of Creation"

Authors: Zhu Lei, Lifeng Wang, Jiwei Li, Shiyang Zou, Junfeng Wu, Zhonghai Zhao, Wei Sun, Wenqiang Yuan, Longxing Li, Zheng Yan, Jun Li, Wenhua Ye, Xiantu He, Bin Qiao

Abstract: Pillars of Creation, one of the most recognized objects in the sky, are believed to be associated with the formation of young stars. However, so far, the formation and maintenance mechanism for the pillars are still not fully understood due to the complexity of the nonlinear radiation magneto-hydrodynamics (RMHD). Here, assuming laboratory laser-driven conditions, we studied the self-consistent dy… ▽ More Pillars of Creation, one of the most recognized objects in the sky, are believed to be associated with the formation of young stars. However, so far, the formation and maintenance mechanism for the pillars are still not fully understood due to the complexity of the nonlinear radiation magneto-hydrodynamics (RMHD). Here, assuming laboratory laser-driven conditions, we studied the self-consistent dynamics of pillar structures in magnetic fields by means of two-dimensional (2D) and three-dimensional (3D) RMHD simulations, and these results also support our proposed experimental scheme. We find only when the magnetic pressure and ablation pressure are comparable, the magnetic field can significantly alter the plasma hydrodynamics. For medium magnetized cases ($β_{initial} \approx 3.5$), {the initial magnetic fields undergo compression and amplification. This amplification results in the magnetic pressure inside the pillar becoming large enough to support the sides of the pillar against radial collapse due to pressure from the surrounding hot plasma. This effect is particularly pronounced for the parallel component ($B_y$), which is consistent with observational results.} In contrast, a strong perpendicular ($B_x, B_z$) magnetic field ($β_{initial} < 1$) almost remains its initial distribution and significantly suppresses the expansion of blow-off gas plasma, leading to the inability to form pillar-like structures. The 3D simulations suggest that the bending at the head of `Column \uppercase\expandafter{\romannumeral1}' in pillars of creation may be due to the non-parallel magnetic fields. After similarity scaling transformation, our results can be applied to explain the formation and maintenance mechanism of the pillars, and can also provide useful information for future experimental designs. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Observation of Bose-Einstein Condensation of Dipolar Molecules

Authors: Niccolò Bigagli, Weijun Yuan, Siwei Zhang, Boris Bulatovic, Tijs Karman, Ian Stevenson, Sebastian Will

Abstract: Ensembles of particles governed by quantum mechanical laws exhibit fascinating emergent behavior. Atomic quantum gases, liquid helium, and electrons in quantum materials all show distinct properties due to their composition and interactions. Quantum degenerate samples of bosonic dipolar molecules promise the realization of novel phases of matter with tunable dipolar interactions and new avenues fo… ▽ More Ensembles of particles governed by quantum mechanical laws exhibit fascinating emergent behavior. Atomic quantum gases, liquid helium, and electrons in quantum materials all show distinct properties due to their composition and interactions. Quantum degenerate samples of bosonic dipolar molecules promise the realization of novel phases of matter with tunable dipolar interactions and new avenues for quantum simulation and quantum computation. However, rapid losses, even when reduced through collisional shielding techniques, have so far prevented cooling to a Bose-Einstein condensate (BEC). In this work, we report on the realization of a BEC of dipolar molecules. By strongly suppressing two- and three-body losses via enhanced collisional shielding, we evaporatively cool sodium-cesium (NaCs) molecules to quantum degeneracy. The BEC reveals itself via a bimodal distribution and a phase-space-density exceeding one. BECs with a condensate fraction of 60(10) % and a temperature of 6(2) nK are created and found to be stable with a lifetime close to 2 seconds. This work opens the door to the exploration of dipolar quantum matter in regimes that have been inaccessible so far, promising the creation of exotic dipolar droplets, self-organized crystal phases, and dipolar spin liquids in optical lattices. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Comments: 10 pages, 7 figures

Journal ref: Nature 631, 289-293 (2024)

Ground Calibration Result of the Lobster Eye Imager for Astronomy

Authors: Huaqing Cheng, Zhixing Ling, Chen Zhang, Xiaojin Sun, Shengli Sun, Yuan Liu, Yanfeng Dai, Zhenqing Jia, Haiwu Pan, Wenxin Wang, Donghua Zhao, Yifan Chen, Zhiwei Cheng, Wei Fu, Yixiao Han, Junfei Li, Zhengda Li, Xiaohao Ma, Yulong Xue, Ailiang Yan, Qiang Zhang, Yusa Wang, Xiongtao Yang, Zijian Zhao, Weimin Yuan

Abstract: We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and ca… ▽ More We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module. In this paper, we present the results of the end-to-end calibration campaign of the complete module carried out at the 100-m X-ray Test Facility at IHEP. The PSF, effective area and energy response of the detectors were measured in a wide range of incident directions at several X-ray line energies. The distributions of the PSF and effective areas are roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. The mild variations and deviations from the prediction of idealized lobster-eye optics can be understood to be caused by the imperfect shapes and alignment of the micro-pores as well as the obscuration by the supporting frames, which can be well reproduced by MC simulations. The spatial resolution of LEIA defined by the FWHM of the focal spot ranges from 4-8 arcmin with a median of 5.7. The measured effective areas are in range of 2-3 $cm^2$ at ~1.25 keV across the entire FoV, and its dependence on photon energy is in large agreement with simulations. The gains of the CMOS sensors are in range of 6.5-6.9 eV/DN, and the energy resolutions in the range of ~120-140 eV at 1.25 keV and ~170-190 eV at 4.5 keV. These results have been ingested into the calibration database and applied to the analysis of the scientific data acquired by LEIA. This work paves the way for the calibration of the Wide-field X-Ray Telescope modules of the Einstein Probe mission. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 24 pages, 13 figures. Submitted to Experimental Astronomy

Characterization of an $\rm ^{27}Al^+$ ion optical clock laser with three independent methods

Authors: Zhiyuan Wang, Zhiyu Ma, Wenzhe Wei, Jialu Chang, Jingxuan Zhang, Qiyue Wu, Wenhao Yuan, Ke Deng, Zehuang Lu, Jie Zhang

Abstract: We report on the development and performance evaluation of an ultra-stable clock laser for an $\rm ^{27}Al^+$ optical clock. The thermal noise limited ultra-stable laser is developed based on a 30 cm long ultra-stable cavity. Three independent evaluation methods, including the frequency noise summation method, the three-cornered hat (TCH) method, and the optical clock transition detection method,… ▽ More We report on the development and performance evaluation of an ultra-stable clock laser for an $\rm ^{27}Al^+$ optical clock. The thermal noise limited ultra-stable laser is developed based on a 30 cm long ultra-stable cavity. Three independent evaluation methods, including the frequency noise summation method, the three-cornered hat (TCH) method, and the optical clock transition detection method, are used to evaluate the clock laser performance. The summation result of various frequency noise terms is compared with the result of the TCH method. In addition, the $\rm ^{27}Al^+$ ion optical clock transition with ultra-narrow linewidth is also used to detect the frequency noise of the laser at lower Fourier frequencies. The results of the three methods show good agreements, showing a frequency instability level of $1.3\times10^{-16}$, and giving us confidence that these evaluation methods may provides guidance for accurate evaluations of high stability laser sources. △ Less

Submitted 11 December, 2023; originally announced December 2023.

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Radiation effects on scientific CMOS sensors for X-ray astronomy: I. proton irradiation

Authors: Mingjun Liu, Zhixing Ling, Qinyu Wu, Chen Zhang, Jiaqiang Liu, Zhenlong Zhang, Weimin Yuan, Shuang-Nan Zhang

Abstract: Complementary metal-oxide-semiconductor (CMOS) sensors are a competitive choice for future X-ray astronomy missions. Typically, CMOS sensors on space astronomical telescopes are exposed to a high dose of irradiation. We investigate the impact of irradiation on the performance of two scientific CMOS (sCMOS) sensors between -30 to 20 degree at high gain mode (7.5 times), including the bias map, read… ▽ More Complementary metal-oxide-semiconductor (CMOS) sensors are a competitive choice for future X-ray astronomy missions. Typically, CMOS sensors on space astronomical telescopes are exposed to a high dose of irradiation. We investigate the impact of irradiation on the performance of two scientific CMOS (sCMOS) sensors between -30 to 20 degree at high gain mode (7.5 times), including the bias map, readout noise, dark current, conversion gain, and energy resolution. The two sensors are irradiated with 50 MeV protons with a total dose of 5.3*10^10 p/cm^2. After the exposure, the bias map, readout noise and conversion gain at various temperatures are not significantly degraded, nor is the energy resolution at -30 degree. However, after the exposure the dark current has increased by hundreds of times, and for every 20 degree increase in temperature, the dark current also increases by an order of magnitude. Therefore, at room temperature, the fluctuations of the dark currents dominate the noise and lead to a serious degradation of the energy resolution. Moreover, among the 4k * 4k pixels, there are about 100 pixels whose bias at 50 ms has changed by more than 10 DN (~18 e-), and about 10 pixels whose readout noise has increased by over 15 e- at -30 degree. Fortunately, the influence of the dark current can be reduced by decreasing the integration time, and the degraded pixels can be masked by regular analysis of the dark images. Some future X-ray missions will likely operate at -30 degree, under which the dark current is too small to significantly affect the X-ray performance. Our investigations show the high tolerance of the sCMOS sensors for proton radiation and prove their suitability for X-ray astronomy applications. △ Less

Submitted 4 December, 2023; originally announced December 2023.

Comments: accepted by JATIS

Liquid-shaped microlens for scalable production of ultrahigh-resolution OCT microendoscope

Authors: Chao Xu, Xin Guan, Syeda Aimen Abbasi, Neng Xia, To Ngai, Li Zhang, Ho-Pui Ho, Sze Hang Calvin Ng, Wu Yuan

Abstract: Endoscopic optical coherence tomography (OCT) is a valuable tool for providing diagnostic images of internal organs and guiding interventions in real time. Miniaturized OCT endoscopes are essential for imaging small and convoluted luminal organs while minimizing invasiveness. However, current methods for fabricating miniature fiber probes have limited ability to correct optical aberrations, leadin… ▽ More Endoscopic optical coherence tomography (OCT) is a valuable tool for providing diagnostic images of internal organs and guiding interventions in real time. Miniaturized OCT endoscopes are essential for imaging small and convoluted luminal organs while minimizing invasiveness. However, current methods for fabricating miniature fiber probes have limited ability to correct optical aberrations, leading to suboptimal imaging performance. In this study, we introduce a new paradigm of liquid shaping technique for the rapid and scalable fabrication of ultrathin and high-performance OCT microendoscopes suitable for minimally invasive clinical applications. This technique enables the flexible customization of freeform microlenses with sub-nanometer optical surface roughness by regulating the minimum energy state of curable optical liquid on a wettability-modified substrate and precisely controlling the liquid volume and physical boundary on a substrate. Using this technique, we simultaneously fabricated 800-nm OCT microendoscopes with a diameter of approximately 0.6 mm and evaluated their ultrahigh-resolution imaging performance in the esophagus of rats and the aorta and brain of mice. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: 42 pages, 7 figures in the main text

MSC Class: 78-05

Auto-ICell: An Accessible and Cost-Effective Integrative Droplet Microfluidic System for Real-Time Single-Cell Morphological and Apoptotic Analysis

Authors: Yuanyuan Wei, Meiai Lin, Shanhang Luo, Syed Muhammad Tariq Abbasi, Liwei Tan, Guangyao Cheng, Bijie Bai, Yi-Ping Ho, Scott Wu Yuan, Ho-Pui Ho

Abstract: The Auto-ICell system, a novel, and cost-effective integrated droplet microfluidic system, is introduced for real-time analysis of single-cell morphology and apoptosis. This system integrates a 3D-printed microfluidic chip with image analysis algorithms, enabling the generation of uniform droplet reactors and immediate image analysis. The system employs a color-based image analysis algorithm in th… ▽ More The Auto-ICell system, a novel, and cost-effective integrated droplet microfluidic system, is introduced for real-time analysis of single-cell morphology and apoptosis. This system integrates a 3D-printed microfluidic chip with image analysis algorithms, enabling the generation of uniform droplet reactors and immediate image analysis. The system employs a color-based image analysis algorithm in the bright field for droplet content analysis. Meanwhile, in the fluorescence field, cell apoptosis is quantitatively measured through a combination of deep-learning-enabled multiple fluorescent channel analysis and a live/dead cell stain kit. Breast cancer cells are encapsulated within uniform droplets, with diameters ranging from 70 μm to 240 μm, generated at a high throughput of 1,500 droplets per minute. Real-time image analysis results are displayed within 2 seconds on a custom graphical user interface (GUI). The system provides an automatic calculation of the distribution and ratio of encapsulated dyes in the bright field, and in the fluorescent field, cell blebbing and cell circularity are observed and quantified respectively. The Auto-ICell system is non-invasive and provides online detection, offering a robust, time-efficient, user-friendly, and cost-effective solution for single-cell analysis. It significantly enhances the detection throughput of droplet single-cell analysis by reducing setup costs and improving operational performance. This study highlights the potential of the Auto-ICell system in advancing biological research and personalized disease treatment, with promising applications in cell culture, biochemical microreactors, drug carriers, cell-based assays, synthetic biology, and point-of-care diagnostics. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: 22 pages, 5 figures

An Aluminum-coated sCMOS sensor for X-Ray Astronomy

Authors: Qinyu Wu, Zhixing Ling, Chen Zhang, Shuang-Nan Zhang, Weimin Yuan

Abstract: In recent years, tremendous progress has been made on scientific Complementary Metal Oxide Semiconductor (sCMOS) sensors, making them a promising device for future space X-ray missions. We have customized a large-format sCMOS sensor, G1516BI, dedicated for X-ray applications. In this work, a 200 nm thick aluminum layer is successfully sputtered on the surface of this sensor. This Al-coated sensor,… ▽ More In recent years, tremendous progress has been made on scientific Complementary Metal Oxide Semiconductor (sCMOS) sensors, making them a promising device for future space X-ray missions. We have customized a large-format sCMOS sensor, G1516BI, dedicated for X-ray applications. In this work, a 200 nm thick aluminum layer is successfully sputtered on the surface of this sensor. This Al-coated sensor, named EP4K, shows consistent performance with the uncoated version. The readout noise of the EP4K sensor is around 2.5 e- and the dark current is less than 0.01 e-/pixel/s at -30 degree. The maximum frame rate is 20 Hz in the current design. The ratio of single pixel events of the sensor is 45.0%. The energy resolution can reach 153.2 eV at 4.51 keV and 174.2 eV at 5.90 keV at -30 degree. The optical transmittance of the aluminum layer is approximately 1e-8 to 1e-10 for optical lights from 365 to 880 nm, corresponding to an effective aluminum thickness of around 140 to 160 nm. The good X-ray performance and low optical transmittance of this Al-coated sCMOS sensor make it a good choice for space X-ray missions. The Lobster Eye Imager for Astronomy (LEIA), which has been working in orbit for about one year, is equipped with four pieces of EP4K sensors. Furthermore, 48 pieces of EP4K sensors are used on the Wide-field X-ray Telescope (WXT) on the Einstein Probe (EP) satellite, which will be launched at the end of 2023. △ Less

Submitted 4 December, 2023; v1 submitted 23 October, 2023; originally announced October 2023.

Comments: published on PASP

Lab-in-a-Tube: A portable imaging spectrophotometer for cost-effective, high-throughput, and label-free analysis of centrifugation processes

Authors: Yuanyuan Wei, Dehua Hu, Bijie Bai, Chenqi Meng, Tsz Kin Chan, Xing Zhao, Yuye Wang, Yi-Ping Ho, Wu Yuan, Ho-Pui Ho

Abstract: Centrifuges serve as essential instruments in modern experimental sciences, facilitating a wide range of routine sample processing tasks that necessitate material sedimentation. However, the study for real time observation of the dynamical process during centrifugation has remained elusive. In this study, we developed an innovative Lab_in_a_Tube imaging spectrophotometer that incorporates capabili… ▽ More Centrifuges serve as essential instruments in modern experimental sciences, facilitating a wide range of routine sample processing tasks that necessitate material sedimentation. However, the study for real time observation of the dynamical process during centrifugation has remained elusive. In this study, we developed an innovative Lab_in_a_Tube imaging spectrophotometer that incorporates capabilities of real time image analysis and programmable interruption. This portable LIAT device costs less than 30 US dollars. Based on our knowledge, it is the first Wi Fi camera built_in in common lab centrifuges with active closed_loop control. We tested our LIAT imaging spectrophotometer with solute solvent interaction investigation obtained from lab centrifuges with quantitative data plotting in a real time manner. Single re circulating flow was real time observed, forming the ring shaped pattern during centrifugation. To the best of our knowledge, this is the very first observation of similar phenomena. We developed theoretical simulations for the single particle in a rotating reference frame, which correlated well with experimental results. We also demonstrated the first demonstration to visualize the blood sedimentation process in clinical lab centrifuges. This remarkable cost effectiveness opens up exciting opportunities for centrifugation microbiology research and paves the way for the creation of a network of computational imaging spectrometers at an affordable price for large scale and continuous monitoring of centrifugal processes in general. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Comments: 21 Pages, 6 Figures

Hybrid Spin and Anomalous Spin-Momentum Locking in Surface Elastic Waves

Authors: Chenwen Yang, Danmei Zhang, Jinfeng Zhao, Wenting Gao, Weitao Yuan, Yang Long, Yongdong Pan, Hong Chen, Franco Nori, Konstantin Y. Bliokh, Zheng Zhong, Jie Ren

Abstract: Transverse spin of surface waves is a universal phenomenon which has recently attracted significant attention in optics and acoustics. It appears in gravity water waves, surface plasmon-polaritons, surface acoustic waves, and exhibits remarkable intrinsic spin-momentum locking, which has found useful applications for efficient spin-direction couplers. Here we demonstrate, both theoretically and ex… ▽ More Transverse spin of surface waves is a universal phenomenon which has recently attracted significant attention in optics and acoustics. It appears in gravity water waves, surface plasmon-polaritons, surface acoustic waves, and exhibits remarkable intrinsic spin-momentum locking, which has found useful applications for efficient spin-direction couplers. Here we demonstrate, both theoretically and experimentally, that the transverse spin of surface elastic (Rayleigh) waves has an anomalous sign near the surface, opposite to that in the case of electromagnetic, sound, or water surface waves. This anomalous sign appears due to the hybrid (neither transverse nor longitudinal) nature of elastic surface waves. Furthermore, we show that this sign anomaly can be employed for the selective spin-controlled excitation of symmetric and antisymmetric Lamb modes propagating in opposite directions in an elastic plate. Our results pave the way for spin-controlled manipulation of elastic waves and can be important for a variety of areas, from phononic spin-based devices to seismic waves. △ Less

Submitted 3 August, 2023; originally announced August 2023.

Comments: 6 pages, 4 figures

A planar cloverleaf antenna for the creation of circularly polarized microwave fields

Authors: Weijun Yuan, Siwei Zhang, Niccolò Bigagli, Claire Warner, Ian Stevenson, Sebastian Will

Abstract: We report on the design and characterization of a compact microwave antenna for atomic and molecular physics experiments. The antenna is comprised of four loop antennas arranged in cloverleaf shape, allowing for precise adjustment of polarization by tuning the relative phase of the loops. We optimize the antenna for left-circularly polarized microwaves at 3.5 GHz and characterize its performance u… ▽ More We report on the design and characterization of a compact microwave antenna for atomic and molecular physics experiments. The antenna is comprised of four loop antennas arranged in cloverleaf shape, allowing for precise adjustment of polarization by tuning the relative phase of the loops. We optimize the antenna for left-circularly polarized microwaves at 3.5 GHz and characterize its performance using ultracold NaCs molecules as a precise quantum sensor. Observing an unusually high Rabi frequency of $2π\times 46$ MHz, we extract an electric field amplitude of 33(2) V/cm at 22 mm distance from the antenna. The polarization ellipticity is 2.3(4) degrees, corresponding to a 24 dB suppression of right-circular polarization. The cloverleaf antenna is planar and provides large optical access, making it highly suitable for quantum control of atoms and molecules, and potentially other quantum systems that operate in the microwave regime. △ Less

Submitted 26 June, 2023; originally announced June 2023.

Comments: 6 pages, 3 figures

Journal ref: Rev. Sci. Instrum. 94, 123201 (2023)

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. Jin, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

Collisionally Stable Gas of Bosonic Dipolar Ground State Molecules

Authors: Niccolò Bigagli, Claire Warner, Weijun Yuan, Siwei Zhang, Ian Stevenson, Tijs Karman, Sebastian Will

Abstract: Stable ultracold ensembles of dipolar molecules hold great promise for many-body quantum physics, but high inelastic loss rates have been a long-standing challenge. Recently, it was shown that gases of fermionic molecules can be effectively stabilized through external fields. However, many quantum applications will benefit from molecular ensembles with bosonic statistics. Here, we stabilize a boso… ▽ More Stable ultracold ensembles of dipolar molecules hold great promise for many-body quantum physics, but high inelastic loss rates have been a long-standing challenge. Recently, it was shown that gases of fermionic molecules can be effectively stabilized through external fields. However, many quantum applications will benefit from molecular ensembles with bosonic statistics. Here, we stabilize a bosonic gas of strongly dipolar NaCs molecules against inelastic losses via microwave shielding, decreasing losses by more than a factor of 200 and reaching lifetimes on the scale of 1 second. We also measure high elastic scattering rates, a result of strong dipolar interactions, and observe the anisotropic nature of dipolar collisions. Finally, we demonstrate evaporative cooling of a bosonic molecular gas to a temperature of 36(5) nK, increasing its phase-space density by a factor of 20. This work is a critical step towards the creation of a Bose-Einstein condensate of dipolar molecules. △ Less

Submitted 25 September, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Comments: 14 pages, 11 figures

Journal ref: Nature Physics 19, 1579-1584 (2023)

Investigating the image lag of a scientific CMOS sensor in X-ray detection

Authors: Qinyu Wu, Zhixing Ling, Chen Zhang, Quan Zhou, Xinyang Wang, Weimin Yuan, Shuang-Nan Zhang

Abstract: In recent years, scientific CMOS (sCMOS) sensors have been vigorously developed and have outperformed CCDs in several aspects: higher readout frame rate, higher radiation tolerance, and higher working temperature. For silicon image sensors, image lag will occur when the charges of an event are not fully transferred inside pixels. It can degrade the image quality for optical imaging, and deteriorat… ▽ More In recent years, scientific CMOS (sCMOS) sensors have been vigorously developed and have outperformed CCDs in several aspects: higher readout frame rate, higher radiation tolerance, and higher working temperature. For silicon image sensors, image lag will occur when the charges of an event are not fully transferred inside pixels. It can degrade the image quality for optical imaging, and deteriorate the energy resolution for X-ray spectroscopy. In this work, the image lag of a sCMOS sensor is studied. To measure the image lag under low-light illumination, we constructed a new method to extract the image lag from X-ray photons. The image lag of a customized X-ray sCMOS sensor GSENSE1516BSI is measured, and its influence on X-ray performance is evaluated. The result shows that the image lag of this sensor exists only in the immediately subsequent frame and is always less than 0.05% for different incident photon energies and under different experimental conditions. The residual charge is smaller than 0.5 e- with the highest incident photon charge around 8 ke-. Compared to the readout noise level around 3 e-, the image lag of this sensor is too small to have a significant impact on the imaging quality and the energy resolution. The image lag shows a positive correlation with the incident photon energy and a negative correlation with the temperature. However, it has no dependence on the gain setting and the integration time. These relations can be explained qualitatively by the non-ideal potential structure inside the pixels. This method can also be applied to the study of image lag for other kinds of imaging sensors. △ Less

Submitted 15 March, 2023; originally announced March 2023.

Comments: accepted by NIM A

Improving the X-ray energy resolution of a scientific CMOS detector by pixel-level gain correction

Authors: Qinyu Wu, Zhixing Ling, Xinyang Wang, Chen Zhang, Weimin Yuan, Shuang-Nan Zhang

Abstract: Scientific Complementary Metal Oxide Semiconductor (sCMOS) sensors are finding increasingly more applications in astronomical observations, thanks to their advantages over charge-coupled devices (CCDs) such as a higher readout frame rate, higher radiation tolerance, and higher working temperature. In this work, we investigate the performance at the individual pixel level of a large-format sCMOS se… ▽ More Scientific Complementary Metal Oxide Semiconductor (sCMOS) sensors are finding increasingly more applications in astronomical observations, thanks to their advantages over charge-coupled devices (CCDs) such as a higher readout frame rate, higher radiation tolerance, and higher working temperature. In this work, we investigate the performance at the individual pixel level of a large-format sCMOS sensor, GSENSE1516BSI, which has 4096 * 4096 pixels, each of 15 μm in size. To achieve this, three areas on the sCMOS sensor, each consisting of 99 * 99 pixels, are chosen for the experiment. The readout noise, conversion gain and energy resolutions of the individual pixels in these areas are measured from a large number (more than 25,000) of X-ray events accumulated for each of the pixels through long time exposures. The energy resolution of these pixels can reach 140 eV at 6.4 keV at room temperature and shows a significant positive correlation with the readout noise. The accurate gain can also be derived individually for each of the pixels from its X-ray spectrum obtained. Variations of the gain values are found at a level of 0.56% statistically among the 30 thousand pixels in the areas studied. With the gain of each pixel determined accurately, a precise gain correction is performed pixel by pixel in these areas, in contrast to the standardized ensemble gain used in the conventional method. In this way, we could almost completely eliminate the degradation of energy resolutions caused by gain variations among pixels. As a result, the energy resolution at room temperature can be significantly improved to 124.6 eV at 4.5 keV and 140.7 eV at 6.4 keV. This pixel-by-pixel gain correction method can be applied to all kinds of CMOS sensors, and is expected to find interesting applications in X-ray spectroscopic observations in the future. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Comments: accepted by PASP

Enhancement of quantum heat engine by encircling a Liouvillian exceptional point

Authors: J. -T. Bu, J. -Q. Zhang, G. -Y. Ding, J. -C. Li, J. -W. Zhang, B. Wang, W. -Q. Ding, W. -F. Yuan, L. Chen, Ş. K. Özdemir, F. Zhou, H. Jing, M. Feng

Abstract: Quantum heat engines are expected to outperform the classical counterparts due to quantum coherences involved. Here we experimentally execute a single-ion quantum heat engine and demonstrate, for the first time, the dynamics and the enhanced performance of the heat engine originating from the Liouvillian exceptional points (LEPs). In addition to the topological effects related to LEPs, we focus on… ▽ More Quantum heat engines are expected to outperform the classical counterparts due to quantum coherences involved. Here we experimentally execute a single-ion quantum heat engine and demonstrate, for the first time, the dynamics and the enhanced performance of the heat engine originating from the Liouvillian exceptional points (LEPs). In addition to the topological effects related to LEPs, we focus on thermodynamic effects, which can be understood by the Landau-Zener-Stuckelberg process under decoherence. We witness a positive net work from the quantum heat engine if the heat engine cycle dynamically encircles an LEP. Further investigation reveals that, a larger net work is done when the system is operated closer to the LEP. We attribute the enhanced performance of the quantum heat engine to the LZS process, enabled by the eigenenergy landscape in the vicinity of the LEP, and the EP-induced topological transition. Therefore, our results open new possibilities to towards LEP-enabled control of quantum heat engines and of thermodynamic processes in open quantum systems. △ Less

Submitted 26 February, 2023; originally announced February 2023.

Comments: 7 pages, 3 figures, Supplementary materials can be found in the Download source

Efficient Pathway to NaCs Ground State Molecules

Authors: Claire Warner, Niccolò Bigagli, Aden Z. Lam, Weijun Yuan, Siwei Zhang, Ian Stevenson, Sebastian Will

Abstract: We present a study of two-photon pathways for the transfer of NaCs molecules to their rovibrational ground state. Starting from NaCs Feshbach molecules, we perform bound-bound excited state spectroscopy in the wavelength range from 900~nm to 940~nm, covering more than 30 vibrational states of the $c \, ^3Σ^+$, $b \, ^3Π$, and $B \, ^1Π$ electronic states. Analyzing the rotational substructure, we… ▽ More We present a study of two-photon pathways for the transfer of NaCs molecules to their rovibrational ground state. Starting from NaCs Feshbach molecules, we perform bound-bound excited state spectroscopy in the wavelength range from 900~nm to 940~nm, covering more than 30 vibrational states of the $c \, ^3Σ^+$, $b \, ^3Π$, and $B \, ^1Π$ electronic states. Analyzing the rotational substructure, we identify the highly mixed $c \, ^3Σ^+_1 \, |v=22 \rangle \sim b \, ^3Π_1 \, | v=54\rangle$ state as an efficient bridge for stimulated Raman adiabatic passage (STIRAP). We demonstrate transfer into the NaCs ground state with an efficiency of up to 88(4)\%. Highly efficient transfer is critical for the realization of many-body quantum phases of strongly dipolar NaCs molecules and high fidelity detection of single molecules, for example, in spin physics experiments in optical lattices and quantum information experiments in optical tweezer arrays. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Comments: 17 pages, 8 figures

Journal ref: New J. Phys. 25 053036 (2023)

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Journal ref: JINST 2023 18 P04034

X-ray Performance of a Small Pixel Size sCMOS Sensor and the Effect of Depletion Depth

Authors: Yu Hsiao, Zhixing Ling, Chen Zhang, Wenxin Wang, Quan Zhou, Xinyang Wang, Shuang-Nan Zhang, Weimin Yuan

Abstract: In recent years, scientific Complementary Metal Oxide Semiconductor (sCMOS) devices have been increasingly applied in X-ray detection, thanks to their attributes such as high frame rate, low dark current, high radiation tolerance and low readout noise. We tested the basic performance of a backside-illuminated (BSI) sCMOS sensor, which has a small pixel size of 6.5 um * 6.5 um. At a temperature of… ▽ More In recent years, scientific Complementary Metal Oxide Semiconductor (sCMOS) devices have been increasingly applied in X-ray detection, thanks to their attributes such as high frame rate, low dark current, high radiation tolerance and low readout noise. We tested the basic performance of a backside-illuminated (BSI) sCMOS sensor, which has a small pixel size of 6.5 um * 6.5 um. At a temperature of -20C, The readout noise is 1.6 e, the dark current is 0.5 e/pixel/s, and the energy resolution reaches 204.6 eV for single-pixel events. The effect of depletion depth on the sensor's performance was also examined, using three versions of the sensors with different deletion depths. We found that the sensor with a deeper depletion region can achieve a better energy resolution for events of all types of pixel splitting patterns, and has a higher efficiency in collecting photoelectrons produced by X-ray photons. We further study the effect of depletion depth on charge diffusion with a center-of-gravity (CG) model. Based on this work, a highly depleted sCMOS is recommended for applications of soft X-ray spectroscop. △ Less

Submitted 30 November, 2022; originally announced November 2022.

Comments: 11 pages, 13 figures. Accepted for publication in JInst

Design and test results of different aluminum coating layers on the sCMOS sensors for soft X-ray detection

Authors: W. X. Wang, Z. X. Ling, C. Zhang, W. M. Yuan, S. N. Zhang

Abstract: In recent years, tremendous progress has been made on complementary metal-oxide-semiconductor (CMOS) sensors for applications as X-ray detectors. To shield the visible light in X-ray detection, a blocking filter of aluminum is commonly employed. We designed three types of aluminum coating layers, which are deposited directly on the surface of back-illuminated sCMOS sensors during fabrication. A co… ▽ More In recent years, tremendous progress has been made on complementary metal-oxide-semiconductor (CMOS) sensors for applications as X-ray detectors. To shield the visible light in X-ray detection, a blocking filter of aluminum is commonly employed. We designed three types of aluminum coating layers, which are deposited directly on the surface of back-illuminated sCMOS sensors during fabrication. A commercial 2k * 2k sCMOS sensor is used to realize these designs. In this work, we report their performance by comparison with that of an uncoated sCMOS sensor. The optical transmissions at 660 nm and 850 nm are measured, and the results show that the optical transmission reaches a level of about 10-9 for the 200 nm aluminum layer and about 10-4 for the 100 nm aluminum layer. Light leakage is found around the four sides of the sensor. The readout noise, fixed-pattern noise and energy resolution of these Al-coated sCMOS sensors do not show significant changes. The dark currents of these Al-coated sCMOS sensors show a noticeable increase compared with that of the uncoated sCMOS sensor at room temperatures, while no significant difference is found when the sCMOS sensors are cooled down to about -15 degree. The aluminum coatings show no visible crack after the thermal cycle and aging tests. Based on these results, an aluminum coating of a larger area on larger sCMOS sensors is proposed for future work. △ Less

Submitted 30 November, 2022; v1 submitted 28 November, 2022; originally announced November 2022.

Comments: Accept for publication in JInst

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Metasurface Holographic Optical Traps for Ultracold Atoms

Authors: Xiaoyan Huang, Weijun Yuan, Aaron Holman, Minho Kwon, Stuart J. Masson, Ricardo Gutierrez-Jauregui, Ana Asenjo-Garcia, Sebastian Will, Nanfang Yu

Abstract: We propose metasurface holograms as a novel platform to generate optical trap arrays for cold atoms with high fidelity, efficiency, and thermal stability. We developed design and fabrication methodologies to create dielectric, phase-only metasurface holograms based on titanium dioxide. We experimentally demonstrated optical trap arrays of various geometries, including periodic and aperiodic config… ▽ More We propose metasurface holograms as a novel platform to generate optical trap arrays for cold atoms with high fidelity, efficiency, and thermal stability. We developed design and fabrication methodologies to create dielectric, phase-only metasurface holograms based on titanium dioxide. We experimentally demonstrated optical trap arrays of various geometries, including periodic and aperiodic configurations with dimensions ranging from 1D to 3D and the number of trap sites up to a few hundred. We characterized the performance of the holographic metasurfaces in terms of the positioning accuracy, size and intensity uniformity of the generated traps, and power handling capability of the dielectric metasurfaces. Our proposed platform has great potential for enabling fundamental studies of quantum many-body physics, and quantum simulation and computation tasks. The compact form factor, passive nature, good power handling capability, and scalability of generating high-quality, large-scale arrays also make the metasurface platform uniquely suitable for realizing field-deployable devices and systems based on cold atoms. △ Less

Submitted 13 October, 2022; originally announced October 2022.

X-ray performance of a customized large-format scientifc CMOS detector

Authors: Qinyu Wu, Zhenqing Jia, Wenxin Wang, Zhixing Ling, Chen Zhang, Shuangnan Zhang, Weimin Yuan

Abstract: In recent years, the performance of Scientifc Complementary Metal Oxide Semiconductor (sCMOS) sensors has been improved signifcantly. Compared with CCD sensors, sCMOS sensors have various advantages, making them potentially better devices for optical and X-ray detection, especially in time-domain astronomy. After a series of tests of sCMOS sensors, we proposed a new dedicated high-speed, large-for… ▽ More In recent years, the performance of Scientifc Complementary Metal Oxide Semiconductor (sCMOS) sensors has been improved signifcantly. Compared with CCD sensors, sCMOS sensors have various advantages, making them potentially better devices for optical and X-ray detection, especially in time-domain astronomy. After a series of tests of sCMOS sensors, we proposed a new dedicated high-speed, large-format X-ray detector in 2016 cooperating with Gpixel Inc. This new sCMOS sensor has a physical size of 6 cm by 6 cm, with an array of 4096 by 4096 pixels and a pixel size of 15 um. The frame rate is 20.1 fps under current condition and can be boosted to a maximum value around 100 fps. The epitaxial thickness is increased to 10 um compared to the previous sCMOS product. We show the results of its frst taped-out product in this work. The dark current of this sCMOS is lower than 10 e/pixel/s at 20C, and lower than 0.02 e/pixel/s at -30C. The Fixed Pattern Noise (FPN) and the readout noise are lower than 5 e in high-gain situation and show a small increase at low temperature. The energy resolution reaches 180.1 eV (3.1%) at 5.90 keV for single-pixel events and 212.3 eV (3.6%) for all split events. The continuous X-ray spectrum measurement shows that this sensor is able to response to X-ray photons from 500 eV to 37 keV. The excellent performance, as demonstrated from these test results, makes sCMOS sensor an ideal detector for X-ray imaging and spectroscopic application. △ Less

Submitted 30 September, 2022; originally announced September 2022.

Comments: 20 pages. published in PASP

Search for relativistic fractionally charged particles in space

Authors: DAMPE Collaboration, F. Alemanno, C. Altomare, Q. An, P. Azzarello, F. C. T. Barbato, P. Bernardini, X. J. Bi, M. S. Cai, E. Casilli, E. Catanzani, J. Chang, D. Y. Chen, J. L. Chen, Z. F. Chen, M. Y. Cui, T. S. Cui, Y. X. Cui, H. T. Dai, A. De-Benedittis, I. De Mitri, F. de Palma, M. Deliyergiyev, A. Di Giovanni, M. Di Santo , et al. (126 additional authors not shown)

Abstract: More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been… ▽ More More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been few searches for FCPs in cosmic rays carried out in orbit other than AMS-01 flown by a space shuttle and BESS by a balloon at the top of the atmosphere. In this study, we conduct an FCP search in space based on on-orbit data obtained using the DArk Matter Particle Explorer (DAMPE) satellite over a period of five years. Unlike underground experiments, which require an FCP energy of the order of hundreds of GeV, our FCP search starts at only a few GeV. An upper limit of $6.2\times 10^{-10}~~\mathrm{cm^{-2}sr^{-1} s^{-1}}$ is obtained for the flux. Our results demonstrate that DAMPE exhibits higher sensitivity than experiments of similar types by three orders of magnitude that more stringently restricts the conditions for the existence of FCP in primary cosmic rays. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: 19 pages, 6 figures, accepted by PRD

Report number: 106, 063026

Journal ref: Physical Review D 106.6 (2022): 063026

Respiration driven CO2 pulses dominate Australia's flux variability

Authors: Eva-Marie Metz, Sanam N. Vardag, Sourish Basu, Martin Jung, Bernhard Ahrens, Tarek El-Madany, Stephen Sitch, Vivek K. Arora, Peter R. Briggs, Pierre Friedlingstein, Daniel S. Goll, Atul K. Jain, Etsushi Kato, Danica Lombardozzi, Julia E. M. S. Nabel, Benjamin Poulter, Roland Séférian, Hanqin Tian, Andrew Wiltshire, Wenping Yuan, Xu Yue, Sönke Zaehle, Nicholas M. Deutscher, David W. T. Griffith, André Butz

Abstract: The Australian continent contributes substantially to the year-to-year variability of the global terrestrial carbon dioxide (CO2) sink. However, the scarcity of in-situ observations in remote areas prevents deciphering the processes that force the CO2 flux variability. Here, examining atmospheric CO2 measurements from satellites in the period 2009-2018, we find recurrent end-of-dry-season CO2 puls… ▽ More The Australian continent contributes substantially to the year-to-year variability of the global terrestrial carbon dioxide (CO2) sink. However, the scarcity of in-situ observations in remote areas prevents deciphering the processes that force the CO2 flux variability. Here, examining atmospheric CO2 measurements from satellites in the period 2009-2018, we find recurrent end-of-dry-season CO2 pulses over the Australian continent. These pulses largely control the year-to-year variability of Australia's CO2 balance, due to 2-3 times higher seasonal variations compared to previous top-down inversions and bottom-up estimates. The CO2 pulses occur shortly after the onset of rainfall and are driven by enhanced soil respiration preceding photosynthetic uptake in Australia's semi-arid regions. The suggested continental-scale relevance of soil rewetting processes has large implications for our understanding and modelling of global climate-carbon cycle feedbacks. △ Less

Submitted 30 November, 2022; v1 submitted 14 July, 2022; originally announced July 2022.

Comments: 28 pages (including supplementary materials), 3 main figures, 7 supplementary figures; v2 changes: Last name of first author changed

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Super-resolution multicolor fluorescence microscopy enabled by an apochromatic super-oscillatory lens with extended depth-of-focus

Authors: Wenli Li, Pei He, Yulong Fan, Yangtao Du, Bo Gao, Zhiqin Chu, Chengxu An, Dangyuan Lei, Weizheng Yuan, Yiting Yu

Abstract: Multicolor super-resolution imaging remains an intractable challenge for both far-field and near-field based super-resolution techniques. Planar super-oscillatory lens (SOL), a far-field subwavelength-focusing diffractive lens device, holds great potential for achieving sub-diffraction-limit imaging at multiple wavelengths. However, conventional SOL devices suffer from a numerical aperture (NA) re… ▽ More Multicolor super-resolution imaging remains an intractable challenge for both far-field and near-field based super-resolution techniques. Planar super-oscillatory lens (SOL), a far-field subwavelength-focusing diffractive lens device, holds great potential for achieving sub-diffraction-limit imaging at multiple wavelengths. However, conventional SOL devices suffer from a numerical aperture (NA) related intrinsic tradeoff among the depth of focus (DoF), chromatic dispersion and focus spot size, being an essential characteristics of common diffractive optical elements. Typically, the limited DoF and significant chromatism associated with high NA can lead to unfavorable degradation of image quality although increasing NA imporves the resolution. Here, we apply a multi-objective genetic algorithm (GA) optimization approach to design an apochromatic binary-phase SOL that generates axially jointed multifoci concurrently having prolonged DoF, customized working distance (WD) and suppressed side-lobes yet minimized main-lobe size, optimizing the aforementioned NA-dependent tradeoff. Experimental implementation of this GA-optimized SOL demonstrates simultaneous focusing of blue, green and red light beams into an optical needle half of the incident wavelength in diameter at 428 um WD, resulting in an ultimate resolution better than one third of the incident wavelength in the lateral dimension. By integrating this apochromatic SOL device with a commercial fluorescence microscope, we employ the optical needle to perform, for the first time, three-dimensional super-resolution multicolor fluorescence imaging of the unseen fine structure of neurons at one go. The present study provides not only a practical route to far-field multicolor super-resolution imaging but also a viable approach for constructing imaging systems avoiding complex sample positioning and unfavorable photobleaching. △ Less

Submitted 5 June, 2022; originally announced June 2022.

Ultracold Gas of Dipolar NaCs Ground State Molecules

Authors: Ian Stevenson, Aden Z. Lam, Niccolò Bigagli, Claire Warner, Weijun Yuan, Siwei Zhang, Sebastian Will

Abstract: We report on the creation of bosonic NaCs molecules in their absolute rovibrational ground state via stimulated Raman adiabatic passage. We create ultracold gases with up to 22,000 dipolar NaCs molecules at a temperature of 300(50) nK and a peak density of $1.0(4) \times 10^{12}$ cm$^{-3}$. We demonstrate comprehensive quantum state control by preparing the molecules in a specific electronic, vibr… ▽ More We report on the creation of bosonic NaCs molecules in their absolute rovibrational ground state via stimulated Raman adiabatic passage. We create ultracold gases with up to 22,000 dipolar NaCs molecules at a temperature of 300(50) nK and a peak density of $1.0(4) \times 10^{12}$ cm$^{-3}$. We demonstrate comprehensive quantum state control by preparing the molecules in a specific electronic, vibrational, rotational, and hyperfine state. Employing the tunability and strength of the permanent electric dipole moment of NaCs, we induce dipole moments of up to 2.6 D. Dipolar systems of NaCs molecules are uniquely suited to explore strongly interacting phases in dipolar quantum matter. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: 6 pages, 5 figures