-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Impact of gas background on XFEL single-particle imaging
Authors:
Tong You,
Johan Bielecki,
Filipe R. N. C. Maia
Abstract:
Single-particle imaging (SPI) using X-ray free-electron Lasers (XFELs) offers the potential to determine protein structures at high spatial and temporal resolutions without the need for crystallization or vitrification. However, the technique faces challenges due to weak diffraction signals from single proteins and significant background scattering from gases used for sample delivery. A recent obs…
▽ More
Single-particle imaging (SPI) using X-ray free-electron Lasers (XFELs) offers the potential to determine protein structures at high spatial and temporal resolutions without the need for crystallization or vitrification. However, the technique faces challenges due to weak diffraction signals from single proteins and significant background scattering from gases used for sample delivery. A recent observation of a diffraction pattern from an isolated GroEL protein complex had similar numbers of signal and background photons. Ongoing efforts aim to reduce the background created by sample delivery, with one approach replacing most of the used gas with helium. In this study, we investigate the effects of a potentially reduced background on the resolution limits for SPI of isolated proteins under different experiment conditions. As a test case, we used GroEL, and we used experimentally measured parameters for our simulations. We observe that background significantly impacts the achievable resolution, particularly when the signal strength is comparable to the background, and a background reduction would lead to a significant improvement in resolution.
△ Less
Submitted 25 November, 2024;
originally announced November 2024.
-
SPRING: an effective and reliable framework for image reconstruction in single-particle Coherent Diffraction Imaging
Authors:
Alessandro Colombo,
Mario Sauppe,
Andre Al Haddad,
Kartik Ayyer,
Morsal Babayan,
Rebecca Boll,
Ritika Dagar,
Simon Dold,
Thomas Fennel,
Linos Hecht,
Gregor Knopp,
Katharina Kolatzki,
Bruno Langbehn,
Filipe R. N. C. Maia,
Abhishek Mall,
Parichita Mazumder,
Tommaso Mazza,
Yevheniy Ovcharenko,
Ihsan Caner Polat,
Dirk Raiser,
Julian C. Schäfer-Zimmermann,
Kirsten Schnorr,
Marie Louise Schubert,
Arezu Sehati,
Jonas A. Sellberg
, et al. (18 additional authors not shown)
Abstract:
Coherent Diffraction Imaging (CDI) is an experimental technique to gain images of isolated structures by recording the light scattered off the sample. In principle, the sample density can be recovered from the scattered light field through a straightforward Fourier Transform operation. However, only the amplitude of the field is recorded, while the phase is lost during the measurement process and…
▽ More
Coherent Diffraction Imaging (CDI) is an experimental technique to gain images of isolated structures by recording the light scattered off the sample. In principle, the sample density can be recovered from the scattered light field through a straightforward Fourier Transform operation. However, only the amplitude of the field is recorded, while the phase is lost during the measurement process and has to be retrieved by means of suitable, well-established phase retrieval algorithms. In this work, we present SPRING, an analysis framework tailored to X-ray Free Electron Laser (XFEL) single-shot single-particle diffraction data that implements the Memetic Phase Retrieval method to mitigate the shortcomings of conventional algorithms. We benchmark the approach on experimental data acquired in two experimental campaigns at SwissFEL and European XFEL. Imaging results on isolated nanostructures reveal unprecedented stability and resilience of the algorithm's behavior on the input parameters, as well as the capability of identifying the solution in conditions hardly treatable so far with conventional methods. A user-friendly implementation of SPRING is released as open-source software, aiming at being a reference tool for the coherent diffraction imaging community at XFEL and synchrotron facilities.
△ Less
Submitted 5 March, 2025; v1 submitted 11 September, 2024;
originally announced September 2024.
-
Social Links vs. Language Barriers: Decoding the Global Spread of Streaming Content
Authors:
Seoyoung Park,
Sanghyeok Park,
Taekho You,
Jinhyuk Yun
Abstract:
The development of the internet has allowed for the global distribution of content, redefining media communication and property structures through various streaming platforms. Previous studies successfully clarified the factors contributing to trends in each streaming service, yet the similarities and differences between platforms are commonly unexplored; moreover, the influence of social connecti…
▽ More
The development of the internet has allowed for the global distribution of content, redefining media communication and property structures through various streaming platforms. Previous studies successfully clarified the factors contributing to trends in each streaming service, yet the similarities and differences between platforms are commonly unexplored; moreover, the influence of social connections and cultural similarity is usually overlooked. We hereby examine the social aspects of three significant streaming services--Netflix, Spotify, and YouTube--with an emphasis on the dissemination of content across countries. Using two-year-long trending chart datasets, we find that streaming content can be divided into two types: video-oriented (Netflix) and audio-oriented (Spotify). This characteristic is differentiated by accounting for the significance of social connectedness and linguistic similarity: audio-oriented content travels via social links, but video-oriented content tends to spread throughout linguistically akin countries. Interestingly, user-generated contents, YouTube, exhibits a dual characteristic by integrating both visual and auditory characteristics, indicating the platform is evolving into unique medium rather than simply residing a midpoint between video and audio media.
△ Less
Submitted 18 April, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Regional profile of questionable publishing
Authors:
Taekho You,
Jinseo Park,
June Young Lee,
Jinhyuk Yun
Abstract:
Countries and authors in the academic periphery occasionally have been criticized for contributing to the expansion of questionable publishing because they share a major fraction of papers in questionable journals. On the other side, topics preferred by mainstream journals sometimes necessitate large-scale investigation, which is impossible for developing countries. Thus, local journals, commonly…
▽ More
Countries and authors in the academic periphery occasionally have been criticized for contributing to the expansion of questionable publishing because they share a major fraction of papers in questionable journals. On the other side, topics preferred by mainstream journals sometimes necessitate large-scale investigation, which is impossible for developing countries. Thus, local journals, commonly low-impacted, are essential to sustain the regional academia for such countries. In this study, we perform an in-depth analysis of the distribution of questionable publications and journals with their interplay with countries quantifying the influence of questionable publications regarding academia's inequality. We find that low-impact journals play a vital role in the regional academic environment, whereas questionable journals with equivalent impact publish papers from all over the world, both geographically and academically. The business model of questionable journals differs from that of regional journals, and may thus be detrimental to the broader academic community.
△ Less
Submitted 2 February, 2025; v1 submitted 12 December, 2023;
originally announced December 2023.
-
Seismic traveltime simulation for variable velocity models using physics-informed Fourier neural operator
Authors:
Chao Song,
Tianshuo Zhao,
Umair bin Waheed,
Cai Liu,
Tian You
Abstract:
Seismic traveltime is critical information conveyed by seismic waves, widely utilized in various geophysical applications. Conventionally, the simulation of seismic traveltime involves solving the eikonal equation. However, the efficiency of traditional numerical solvers is hindered, as they are typically capable of simulating seismic traveltime for only a single source at a time. Recently, deep l…
▽ More
Seismic traveltime is critical information conveyed by seismic waves, widely utilized in various geophysical applications. Conventionally, the simulation of seismic traveltime involves solving the eikonal equation. However, the efficiency of traditional numerical solvers is hindered, as they are typically capable of simulating seismic traveltime for only a single source at a time. Recently, deep learning tools, particularly physics-informed neural networks (PINNs), have proven effective in simulating seismic traveltimes for multiple sources. Nonetheless, PINNs face challenges such as limited generalization capabilities across different models and difficulties in training convergence. To address these issues, we have developed a method for simulating multi-source seismic traveltimes in variable velocity models using a deep-learning technique, known as the physics-informed Fourier neural operator (PIFNO). The PIFNO-based method for seismic traveltime generation takes both velocity and background traveltime as inputs, generating the perturbation traveltime as the output. This method incorporates a factorized eikonal equation as the loss function and relies solely on physical laws, eliminating the need for labeled training data. We demonstrate that our proposed method is not only effective in calculating seismic traveltimes for velocity models used during training but also shows promising prediction capabilities for test velocity models. We validate these features using velocity models from the OpenFWI dataset.
△ Less
Submitted 8 April, 2024; v1 submitted 7 November, 2023;
originally announced November 2023.
-
3D-Printed Sheet Jet for Stable Megahertz Liquid Sample Delivery at X-ray Free Electron Lasers
Authors:
Patrick E. Konold,
Tong You,
Johan Bielecki,
Joana Valerio,
Marco Kloos,
Daniel Westphal,
Alfredo Bellisario,
Tej Varma,
August Wolter,
Jayanath C. P. Koliyadu,
Faisal H. M. Koua,
Romain Letrun,
Adam Round,
Tokushi Sato,
Petra Mésźaros,
Leonardo Monrroy,
Jennifer Mutisya,
Szabolcs Bódizs,
Taru Larkiala,
Amke Nimmrich,
Roberto Alvarez,
Richard Bean,
Tomas Ekeberg,
Richard A. Kirian,
Sebastian Westenhoff
, et al. (1 additional authors not shown)
Abstract:
X-ray Free Electron Lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit is the delivery of samples to the X-ray interaction point in a way that produces data of the highest possible quality and efficiency. This is hampered by constraints posed by the light source and operation within a b…
▽ More
X-ray Free Electron Lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit is the delivery of samples to the X-ray interaction point in a way that produces data of the highest possible quality and efficiency. This is hampered by constraints posed by the light source and operation within a beamline environment. For liquid samples, the solution typically involves a high-speed liquid jet, capable of keeping up with the rate of X-ray pulses. However, conventional jets are not ideal because of radiation-induced explosions of the jet, as well as their cylindrical geometry combined with the X-ray pointing instability of many beamlines causes the interaction volume to differ for every pulse. This complicates data analysis and contributes to measurement errors. An alternative geometry is a liquid sheet jet which, with its constant thickness over large areas, eliminates the X-ray pointing related problems. Since liquid sheets can be made very thin, the radiation-induced explosion is reduced, boosting their stability. They are especially attractive for experiments which benefit from small interaction volumes such as fluctuation X-ray scattering and several types of spectroscopy. Although they have seen increasing use for soft X-ray applications in recent years, there has not yet been wide-scale adoption at XFELs. Here, we demonstrate liquid sheet jet sample injection at the European XFEL. We evaluate several aspects of its performance relative to a conventional liquid jet including thickness profile, stability, and radiation-induced explosion dynamics at high repetition rates. The sheet jet exhibits superior performance across these critical experimental parameters. Its minute thickness also suggests ultrafast single-particle solution scattering is a possibility.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
Auditing citation polarization during the early COVID-19 pandemic
Authors:
Taekho You,
Jinseo Park,
June Young Lee,
Jinhyuk Yun
Abstract:
The recent pandemic stimulated scientists to publish a significant amount of research that created a surge of citations of COVID-19-related publications in a short time, leading to an abrupt inflation of the journal impact factor (IF). By auditing the complete set of COVID-19-related publications in the Web of Science, we reveal here that COVID-19-related research worsened the polarization of acad…
▽ More
The recent pandemic stimulated scientists to publish a significant amount of research that created a surge of citations of COVID-19-related publications in a short time, leading to an abrupt inflation of the journal impact factor (IF). By auditing the complete set of COVID-19-related publications in the Web of Science, we reveal here that COVID-19-related research worsened the polarization of academic journals: the IF before the pandemic was proportional to the increment of IF, which had the effect of increasing inequality while retaining the journal rankings. We also found that the most highly cited studies related to COVID-19 were published in prestigious journals at the onset of the epidemic. Through the present quantitative investigation, our findings caution against the belief that quantitative metrics, particularly IF, can indicate the significance of individual papers. Rather, such metrics reflect the social attention given to a particular study.
△ Less
Submitted 24 May, 2024; v1 submitted 5 January, 2023;
originally announced January 2023.
-
Silicon carbide for integrated photonics
Authors:
Ailun Yi,
Chengli Wang,
Liping Zhou,
Min Zhou,
Shibin Zhang,
Tiangui You,
Jiaxiang Zhang,
Xin Ou
Abstract:
The recent progress in chip-scale integrated photonics has stimulated the rapid development of material platforms with desired optical properties. Among the different material platforms that are currently investigated, the third-generation semiconductor, silicon carbide (SiC), offers the broadest range of functionalities, including wide bandgap, high optical nonlinearities, high refractive index,…
▽ More
The recent progress in chip-scale integrated photonics has stimulated the rapid development of material platforms with desired optical properties. Among the different material platforms that are currently investigated, the third-generation semiconductor, silicon carbide (SiC), offers the broadest range of functionalities, including wide bandgap, high optical nonlinearities, high refractive index, and CMOS-compatible device fabrication process. Here, we provide an overview of SiC-based integrated photonics, presenting the latest progress on investigating its basic optical and optoelectronic properties, as well as the recent developments in the fabrication of several typical approaches for light confinement structures that form the basic building blocks for low-loss, high functional and industry-compatible integrated photonic platform. Moreover, recent works employing SiC as optically-readable spin hosts for quantum information applications are also summarized and discussed. As a still-developing integrated photonic platform, the prospects and challenges of SiC material platform in the field of integrated photonics are also discussed, followed by potential solutions.
△ Less
Submitted 9 May, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
The Forward Physics Facility at the High-Luminosity LHC
Authors:
Jonathan L. Feng,
Felix Kling,
Mary Hall Reno,
Juan Rojo,
Dennis Soldin,
Luis A. Anchordoqui,
Jamie Boyd,
Ahmed Ismail,
Lucian Harland-Lang,
Kevin J. Kelly,
Vishvas Pandey,
Sebastian Trojanowski,
Yu-Dai Tsai,
Jean-Marco Alameddine,
Takeshi Araki,
Akitaka Ariga,
Tomoko Ariga,
Kento Asai,
Alessandro Bacchetta,
Kincso Balazs,
Alan J. Barr,
Michele Battistin,
Jianming Bian,
Caterina Bertone,
Weidong Bai
, et al. (211 additional authors not shown)
Abstract:
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod…
▽ More
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Disturbance of questionable publishing to academia
Authors:
Taekho You,
Jinseo Park,
June Young Lee,
Jinhyuk Yun,
Woo-Sung Jung
Abstract:
Questionable publications have been accused of "greedy" practices; however, their influence on academia has not been gauged. Here, we probe the impact of questionable publications through a systematic and comprehensive analysis with various participants from academia and compare the results with those of their unaccused counterparts using billions of citation records, including liaisons, i.e., jou…
▽ More
Questionable publications have been accused of "greedy" practices; however, their influence on academia has not been gauged. Here, we probe the impact of questionable publications through a systematic and comprehensive analysis with various participants from academia and compare the results with those of their unaccused counterparts using billions of citation records, including liaisons, i.e., journals and publishers, and prosumers, i.e., authors. Questionable publications attribute publisher-level self-citations to their journals while limiting journal-level self-citations; yet, conventional journal-level metrics are unable to detect these publisher-level self-citations. We propose a hybrid journal-publisher metric for detecting self-favouring citations among QJs from publishers. Additionally, we demonstrate that the questionable publications were less disruptive and influential than their counterparts. Our findings indicate an inflated citation impact of suspicious academic publishers. The findings provide a basis for actionable policy-making against questionable publications.
△ Less
Submitted 19 April, 2022; v1 submitted 29 June, 2021;
originally announced June 2021.
-
Tracing the evolution of physics with a keyword co-occurrence network
Authors:
Taekho You,
Oh-Hyun Kwon,
Jisung Yoon,
Woo-Sung Jung
Abstract:
Describing the evolution of science is a salient work not only for revealing the scientific trend but also for establishing a scientific classification system. In this paper, we investigate the evolution of science by observing the structure and change of keyword co-occurrence networks. Starting from seven target physics fields and their initial keywords selected by experts from the Korean Physica…
▽ More
Describing the evolution of science is a salient work not only for revealing the scientific trend but also for establishing a scientific classification system. In this paper, we investigate the evolution of science by observing the structure and change of keyword co-occurrence networks. Starting from seven target physics fields and their initial keywords selected by experts from the Korean Physical Society, we generate keyword co-occurrence networks better to capture topological structure with our proposed approach. In this way, we can construct a more relevant and abundant keyword network from a small set of initial keywords. With these networks, we successfully identify the scientific sub-field by detecting communities and extracting core keywords of each community. Furthermore, we trace the temporal evolution of sub-fields with the time-snapshot keyword network, the resultant temporal change of the community membership explains the evolution of the research field well. Our approach for tracing the evolution of the research field with a keyword co-occurrence network can shed light on identifying and assessing the evolution of science.
△ Less
Submitted 30 October, 2020; v1 submitted 12 October, 2020;
originally announced October 2020.
-
Predicting the Right Mechanism for Hypervalent Iodine Reagents by Applying Two Types of Hypervalent Twist Models: Apical Twist and Equatorial Twist
Authors:
Tian-Yu Sun,
Kai Chen,
Tingting You,
Penggang Yina
Abstract:
Since the hypervalent twist followed by reductive elimination is a general reaction pattern for hypervalent iodine reagents, mechanistic studies about the hypervalent twist step provide significant guidance for experiments. Our previous work showed there are two types of hypervalent twist models, i.e. apical twist and equatorial twist. We applied both hypervalent twist models to explain the isomer…
▽ More
Since the hypervalent twist followed by reductive elimination is a general reaction pattern for hypervalent iodine reagents, mechanistic studies about the hypervalent twist step provide significant guidance for experiments. Our previous work showed there are two types of hypervalent twist models, i.e. apical twist and equatorial twist. We applied both hypervalent twist models to explain the isomerization mechanism of two important electrophilic trifluoromethylating reagents, Togni I and Togni II. To the best of our knowledge, there are less detailed studies about the different twist modes between both reagents, which are important to predict the right reaction mechanism and especially, understand well the differences of reactivity and stability. Here, we successfully identified Togni II's isomerization pathway via equatorial twist, and suggested different hypervalent twist models should be considered to predict the right mechanisms of reactions with hypervalent iodine reagents.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Wafer-scale Heterogeneous Integration of Monocrystalline \b{eta}-Ga2O3 Thin Films on SiC for Thermal Management by Ion-Cutting Technique
Authors:
Zhe Cheng,
Fengwen Mu,
Tiangui You,
Wenhui Xu,
Jingjing Shi,
Michael E. Liao,
Yekan Wang,
Kenny Huynh,
Tadatomo Suga,
Mark S. Goorsky,
Xin Ou,
Samuel Graham
Abstract:
The ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates make \b{eta}-Ga2O3 promising for applications of next-generation power electronics while its thermal conductivity is at least one order of magnitude lower than other wide/ultrawide bandgap semiconductors. To avoid the degradation of device performance and reliability induced by the localized Joule-heating,…
▽ More
The ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates make \b{eta}-Ga2O3 promising for applications of next-generation power electronics while its thermal conductivity is at least one order of magnitude lower than other wide/ultrawide bandgap semiconductors. To avoid the degradation of device performance and reliability induced by the localized Joule-heating, aggressive thermal management strategies are essential, especially for high-power high-frequency applications. This work reports a scalable thermal management strategy to heterogeneously integrate wafer-scale monocrystalline \b{eta}-Ga2O3 thin films on high thermal conductivity SiC substrates by ion-cutting technique. The thermal boundary conductance (TBC) of the \b{eta}-Ga2O3-SiC interfaces and thermal conductivity of the \b{eta}-Ga2O3 thin films were measured by Time-domain Thermoreflectance (TDTR) to evaluate the effects of interlayer thickness and thermal annealing. Materials characterizations were performed to understand the mechanisms of thermal transport in these structures. The results show that the \b{eta}-Ga2O3-SiC TBC values increase with decreasing interlayer thickness and the \b{eta}-Ga2O3 thermal conductivity increases more than twice after annealing at 800 oC due to the removal of implantation-induced strain in the films. A Callaway model is built to understand the measured thermal conductivity. Small spot-to-spot variations of both TBC and Ga2O3 thermal conductivity confirm the uniformity and high-quality of the bonding and exfoliation. Our work paves the way for thermal management of power electronics and \b{eta}-Ga2O3 related semiconductor devices.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Revisiting the Effect of f-Functions in Predicting the Right Reaction Mechanism for Hypervalent Iodine Reagents
Authors:
Tian-Yu Sun,
Kai Chen,
Huakang Zhou,
Tingting You,
Penggang Yin,
Xiao Wang
Abstract:
To understand the effect of f-functions in predicting the right reaction mechanism for hypervalent iodine reagents, we adopt the Ahlrichs basis set family def2-SVP and def2-TZVP to revisit the potential energy surfaces of IBX-mediated oxidation and Togni I's isomerisation. Our results further prove that f-functions (in either Pople, Dunning, or Ahlrichs basis set series) are indispensable to predi…
▽ More
To understand the effect of f-functions in predicting the right reaction mechanism for hypervalent iodine reagents, we adopt the Ahlrichs basis set family def2-SVP and def2-TZVP to revisit the potential energy surfaces of IBX-mediated oxidation and Togni I's isomerisation. Our results further prove that f-functions (in either Pople, Dunning, or Ahlrichs basis set series) are indispensable to predict the correct rate-determining step of hypervalent iodine reagents. The f-functions have a significant impact on the predicted reaction barriers for processes involving the I-X (X = O, OH, CF$_3$, etc.) bond cleavage and formation, e.g. in the reductive elimination step or the hypervalent twist step. We furthermore explore two hypervalent twist modes that account for the different influences of f-functions for IBX and Togni I. Our findings may be helpful for theoretical chemists to appropriately study the reaction mechanism of hypervalent iodine reagents.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
A System Dynamics Analysis of National R&D Performance Measurement System in Korea
Authors:
Taekho You,
Woo-Sung Jung
Abstract:
Peer review is one of useful and powerful performance measurement process. In Korea, it needs to increase quality of R&D performance, but bibliometric evaluation and lack of peers have opposite effect. We used system dynamics to describe Korean R&D performance measurement system and ways to increase performance quality. To meet a desired R&D performance quality, increasing fairness and quality of…
▽ More
Peer review is one of useful and powerful performance measurement process. In Korea, it needs to increase quality of R&D performance, but bibliometric evaluation and lack of peers have opposite effect. We used system dynamics to describe Korean R&D performance measurement system and ways to increase performance quality. To meet a desired R&D performance quality, increasing fairness and quality of evaluation is needed. Size of peer pool decreased because of the specialization of R&D projects and the Sangpi process both, and it is critical to acquire both fairness and quality. Also, shortening evaluation period affect to R&D performance quality, by causing workloads increase, limiting long-term and innovative R&D projects, and decreasing evaluation quality. Previous evaluation policies do a role like micro-controlling the R&D's activities, but increasing the size of peer pool and changing evaluation period would make a change to quality and fairness of evaluation.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Light-by-Light Scattering Constraint on Born-Infeld Theory
Authors:
John Ellis,
Nick E. Mavromatos,
Tevong You
Abstract:
The recent measurement by ATLAS of light-by-light scattering in LHC Pb-Pb collisions is the first direct evidence for this basic process. We find that it requires the mass scale of a nonlinear Born-Infeld extension of QED to be $\gtrsim 100$~GeV, a much stronger constraint than those derived previously. In the case of a Born-Infeld extension of the Standard Model in which the U(1)$_{\rm Y}$ hyperc…
▽ More
The recent measurement by ATLAS of light-by-light scattering in LHC Pb-Pb collisions is the first direct evidence for this basic process. We find that it requires the mass scale of a nonlinear Born-Infeld extension of QED to be $\gtrsim 100$~GeV, a much stronger constraint than those derived previously. In the case of a Born-Infeld extension of the Standard Model in which the U(1)$_{\rm Y}$ hypercharge gauge symmetry is realized nonlinearly, the limit on the corresponding mass scale is $\gtrsim 90$~GeV, which in turn imposes a lower limit of $\gtrsim 11$~TeV on the magnetic monopole mass in such a U(1)$_{\rm Y}$ Born-Infeld theory.
△ Less
Submitted 24 May, 2017; v1 submitted 24 March, 2017;
originally announced March 2017.
-
Community Detection in Complex Networks Using Density-based Clustering Algorithm
Authors:
Tao You,
Ben-Chang Shia,
Zhong-Yuan Zhang
Abstract:
Like clustering analysis, community detection aims at assigning nodes in a network into different communities. Fdp is a recently proposed density-based clustering algorithm which does not need the number of clusters as prior input and the result is insensitive to its parameter. However, Fdp cannot be directly applied to community detection due to its inability to recognize the community centers in…
▽ More
Like clustering analysis, community detection aims at assigning nodes in a network into different communities. Fdp is a recently proposed density-based clustering algorithm which does not need the number of clusters as prior input and the result is insensitive to its parameter. However, Fdp cannot be directly applied to community detection due to its inability to recognize the community centers in the network. To solve the problem, a new community detection method (named IsoFdp) is proposed in this paper. First, we use Isomap technique to map the network data into a low dimensional manifold which can reveal diverse pair-wised similarity. Then Fdp is applied to detect the communities in networks. An improved partition density function is proposed to select the proper number of communities automatically. We test our method on both synthetic and real-world networks, and the results demonstrate the effectiveness of our algorithm over the state-of-the-art methods.
△ Less
Submitted 31 January, 2016; v1 submitted 24 December, 2015;
originally announced December 2015.
-
Are Copying and Innovation Enough?
Authors:
T. S. Evans,
A. D. K. Plato,
T. You
Abstract:
Exact analytic solutions and various numerical results for the rewiring of bipartite networks are discussed. An interpretation in terms of copying and innovation processes make this relevant in a wide variety of physical contexts. These include Urn models and Voter models, and our results are also relevant to some studies of Cultural Transmission, the Minority Game and some models of ecology.
Exact analytic solutions and various numerical results for the rewiring of bipartite networks are discussed. An interpretation in terms of copying and innovation processes make this relevant in a wide variety of physical contexts. These include Urn models and Voter models, and our results are also relevant to some studies of Cultural Transmission, the Minority Game and some models of ecology.
△ Less
Submitted 15 September, 2008;
originally announced September 2008.
