Showing 1–50 of 230 results for author: Xue, C

Three-dimensional topological disclination in acoustic crystals

Authors: Zhenxiao Zhu, Yan Meng, Minmiao Wang, Xiang Xi, Yuxin Zhong, Linyun Yang, Bei Yan, Jingming Chen, Ziyao Wang, Thomas Christensen, Caigui Jiang, Changqing Xu, Ce Shang, Zhen Gao

Abstract: Topological disclinations, crystallographic defects that break rotation lattice symmetry, have attracted great interest and exhibited wide applications in cavities, waveguides, and lasers. However, topological disclinations have thus far been predominantly restricted to two-dimensional (2D) systems owing to the substantial challenges in constructing such defects in three-dimensional (3D) systems a… ▽ More Topological disclinations, crystallographic defects that break rotation lattice symmetry, have attracted great interest and exhibited wide applications in cavities, waveguides, and lasers. However, topological disclinations have thus far been predominantly restricted to two-dimensional (2D) systems owing to the substantial challenges in constructing such defects in three-dimensional (3D) systems and characterizing their topological features. Here we report the theoretical proposal and experimental demonstration of a 3D topological disclination that exhibits fractional (1/2) charge and zero-dimensional (0D) topological bound states, realized by cutting-and-gluing a 3D acoustic topological crystalline insulator. Using acoustic pump-probe measurements, we directly observe 0D topological disclination states at the disclination core, consistent with the tight-binding model and full-wave simulation results. Our results extend the research frontier of topological disclinations and open a new paradigm for exploring the interplay between momentum-space band topology and the real-space defect topology in 3D and higher dimensions. △ Less

Submitted 18 May, 2025; originally announced May 2025.

Efficient construction of effective Hamiltonians with a hybrid machine learning method

Authors: Yang Cheng, Binhua Zhang, Xueyang Li, Hongyu Yu, Changsong Xu, Hongjun Xiang

Abstract: The effective Hamiltonian method is a powerful tool for simulating large-scale systems across a wide range of temperatures. However, previous methods for constructing effective Hamiltonian models suffer from key limitations: some require to manually predefine interaction terms limited flexibility in capturing complex systems, while others lack efficiency in selecting optimal interactions. In this… ▽ More The effective Hamiltonian method is a powerful tool for simulating large-scale systems across a wide range of temperatures. However, previous methods for constructing effective Hamiltonian models suffer from key limitations: some require to manually predefine interaction terms limited flexibility in capturing complex systems, while others lack efficiency in selecting optimal interactions. In this work, we introduce the Lasso-GA Hybrid Method (LGHM), a novel approach that combines Lasso regression and genetic algorithms to rapidly construct effective Hamiltonian models. Such method is broadly applicable to both magnetic systems (e.g., spin Hamiltonians) and atomic displacement models. To verify the reliability and usefulness of LGHM, we take monolayer CrI_3 and Fe_3 GaTe_2 as examples. In both cases, LGHM not only successfully identifies key interaction terms with high fitting accuracy, but also reproduces experimental magnetic ground states and Curie temperatures with further Monte Carlo simulations. Notable, our analysis of monolayer Fe_3 GaTe_2 reveals that the single-ion anisotropy and Heisenberg interaction lead to an out-of-plane ferromagnetic ground state, while the fourth-order interactions contribute significantly to the high Curie temperature. Our method is general so it can be applied to construct other effective Hamiltonian models. △ Less

Submitted 7 May, 2025; originally announced May 2025.

Complete suppression of flux instabilities in ramped superconducting magnets with synchronous temperature-modulated Jc

Authors: Cun Xue, Han-Xi Ren, Kai-Wei Cao, Wei Liu, Wen-Tao Zhang, Fang Yang, Guo Yan, You-He Zhou, Pingxiang Zhang

Abstract: Nonlinear multi-field coupling as an intrinsic property of complex physical systems often leads to abrupt and undesired instabilities. For current-ramped high-field Nb3Sn magnets, frequent flux jumps are observed, which easily causes premature quenches and requires prolonged and resource-intensive magnet training process. In this study, we propose a paradigm-shifting methodology framework that ach… ▽ More Nonlinear multi-field coupling as an intrinsic property of complex physical systems often leads to abrupt and undesired instabilities. For current-ramped high-field Nb3Sn magnets, frequent flux jumps are observed, which easily causes premature quenches and requires prolonged and resource-intensive magnet training process. In this study, we propose a paradigm-shifting methodology framework that achieves complete suppression of thermomagnetic instabilities through synchronized temperature-modulated critical current density (Jc). Through numerical simulations of flux jumps in multifilamentary Nb3Sn wires at various temperatures, we construct thermomagnetic stability diagram in the Ha-T plane. The simulated results are in good agreement with experiments, confirming that the synchronized temperature ramp-down can fully eliminate flux jumps. We reveal the underlying mechanism of enhancing the thermomagnetic stability arises from that synchronized temperature ramp-down can continuously tune both Jc and its slope. Furthermore, we explore the thermomagnetic instabilities of current-ramped superconducting magnets through large-scale GPU-optimized algorithm. The flux jump and quench diagram in the Ia-T plane are obtained. It indicates that the temperature ramp-down can completely suppress flux jumps without compromising Jc at high magnetic fields. Importantly, this method does not require modifications to the superconducting microstructures or fabrication process, offering a practical and broadly applicable solution. The findings not only provide a robust method for stabilizing various superconducting magnet systems, including high-temperature superconducting magnets wound with second-generated (2G) coated tapes, but also suggest a generalizable strategy for controlling instability in other nonlinear non-equilibrium physical systems. △ Less

Submitted 12 May, 2025; v1 submitted 7 May, 2025; originally announced May 2025.

Levitated Sensor for Magnetometry in Ambient Environment

Authors: Wei Ji, Changhao Xu, Guofeng Qu, Dmitry Budker

Abstract: Levitated particle systems have gained significant attention as a rapidly advancing platform for precision sensing, offering low-loss, highly isolated environments by eliminating mechanical contact and associated noise. Current room-temperature levitation techniques are primarily sensitive to acceleration, with magnetic sensing often relying on the Meissner effect, which is impractical under ambie… ▽ More Levitated particle systems have gained significant attention as a rapidly advancing platform for precision sensing, offering low-loss, highly isolated environments by eliminating mechanical contact and associated noise. Current room-temperature levitation techniques are primarily sensitive to acceleration, with magnetic sensing often relying on the Meissner effect, which is impractical under ambient conditions. Here, we demonstrate a diamagnetically stabilized magnetically levitated magnet magnetometer (LeMaMa), where the motion of the magnet is detected optically. Leveraging strong spin-lattice coupling in the ferromagnet to suppress spin-projection noise and minimizing dissipation through levitation, we achieve a sensitivity of 32 fT $/Hz^{1/2}$. This sensitivity is adequate for a wide range of applications in biology, chemistry, and fundamental physics, matching the performance of leading technologies like SQUIDs and atomic magnetometers, while offering the distinct advantage of operating at room temperature and under Earth's magnetic field. △ Less

Submitted 30 April, 2025; originally announced April 2025.

Laboratory rotational spectra of cyanocyclohexane and its siblings (1- and 4-cyanocyclohexene) using a compact CP-FTMW spectrometer for interstellar detection

Authors: Gabi Wenzel, Martin S. Holdren, D. Archie Stewart, Hannah Toru Shay, Alex N. Byrne, Ci Xue, Brett A. McGuire

Abstract: Chirped-pulse Fourier transform microwave (CP-FTMW) spectroscopy is a versatile technique to record broadband gas-phase rotational spectra, enabling detailed investigations of molecular structure, dynamics, and hyperfine interactions. Here, we present the development and application of a CP-FTMW spectrometer operating in the 6.5-18 GHz frequency range, studying cyanocyclohexane, 1-cyanocyclohexene… ▽ More Chirped-pulse Fourier transform microwave (CP-FTMW) spectroscopy is a versatile technique to record broadband gas-phase rotational spectra, enabling detailed investigations of molecular structure, dynamics, and hyperfine interactions. Here, we present the development and application of a CP-FTMW spectrometer operating in the 6.5-18 GHz frequency range, studying cyanocyclohexane, 1-cyanocyclohexene, and 4-cyanocyclohexene using a heated pulsed supersonic expansion source. The dynamic range, experimental resolution, and high sensitivity enable observation of multiple conformers, precise measurements of hyperfine splitting arising from nuclear quadrupole coupling due to the nitrogen atom in the cyano group, as well as the observation of singly $^{13}$C- and $^{15}$N-substituted isotopic isomers in natural abundance. Using the latter, precise structures for the molecules are derived. The accurate rotational spectra enabled a search for these species toward the dark, cold molecular cloud TMC-1; no signals are found, and we discuss the implications of derived upper limits on the interstellar chemistry of the cyanocyclohexane family. △ Less

Submitted 18 April, 2025; originally announced April 2025.

Comments: Accepted in JPCA

Discovery of the 7-ring PAH Cyanocoronene (C$_{24}$H$_{11}$CN) in GOTHAM Observations of TMC-1

Authors: Gabi Wenzel, Siyuan Gong, Ci Xue, P. Bryan Changala, Martin S. Holdren, Thomas H. Speak, D. Archie Stewart, Zachary T. P. Fried, Reace H. J. Willis, Edwin A. Bergin, Andrew M. Burkhardt, Alex N. Byrne, Steven B. Charnley, Andrew Lipnicky, Ryan A. Loomis, Christopher N. Shingledecker, Ilsa R. Cooke, Anthony J. Remijan, Michael C. McCarthy, Alison E. Wendlandt, Brett A. McGuire

Abstract: We present the synthesis and laboratory rotational spectroscopy of the 7-ring polycyclic aromatic hydrocarbon (PAH) cyanocoronene (C$_{24}$H$_{11}$CN) using a laser-ablation assisted cavity-enhanced Fourier transform microwave spectrometer. A total of 71 transitions were measured and assigned between 6.8--10.6\,GHz. Using these assignments, we searched for emission from cyanocoronene in the GBT Ob… ▽ More We present the synthesis and laboratory rotational spectroscopy of the 7-ring polycyclic aromatic hydrocarbon (PAH) cyanocoronene (C$_{24}$H$_{11}$CN) using a laser-ablation assisted cavity-enhanced Fourier transform microwave spectrometer. A total of 71 transitions were measured and assigned between 6.8--10.6\,GHz. Using these assignments, we searched for emission from cyanocoronene in the GBT Observations of TMC-1: Hunting Aromatic Molecules (GOTHAM) project observations of the cold dark molecular cloud TMC-1 using the 100\,m Green Bank Telescope (GBT). We detect a number of individually resolved transitions in ultrasensitive X-band observations and perform a Markov Chain Monte Carlo analysis to derive best-fit parameters, including a total column density of $N(\mathrm{C}_{24}\mathrm{H}_{11}\mathrm{CN}) = 2.69^{+0.26}_{-0.23} \times 10^{12}\,\mathrm{cm}^{-2}$ at a temperature of $6.05^{+0.38}_{-0.37}\,$K. A spectral stacking and matched filtering analysis provides a robust 17.3$\,σ$ significance to the overall detection. The derived column density is comparable to that of cyano-substituted naphthalene, acenaphthylene, and pyrene, defying the trend of decreasing abundance with increasing molecular size and complexity found for carbon chains. We discuss the implications of the detection for our understanding of interstellar PAH chemistry and highlight major open questions and next steps. △ Less

Submitted 7 April, 2025; originally announced April 2025.

Enabling Continuous THz Band Coverage via Precise Electron Beam Tailoring in Free-electron Lasers

Authors: Yin Kang, Tong Li, Zhen Wang, Yue Wang, Cheng Yu, Weiyi Yin, Zhangfeng Gao, Hanghua Xu, Hang Luo, Xiaofan Wang, Jian Chen, Taihe Lan, Xiaoqing Liu, Jinguo Wang, Huan Zhao, Fei Gao, Liping Sun, YanYan Zhu, Yongmei Wen, Qili Tian, Chenye Xu, Xingtao Wang, Jiaqiang Xu, Zheng Qi, Tao Liu , et al. (6 additional authors not shown)

Abstract: High-power, continuously tunable narrowband terahertz (THz) sources are essential for advancing nonlinear optics, THz-driven material dynamics, and ultrafast spectroscopy. Conventional techniques typically impose a trade-off between pulse energy and frequency tunability. Here, we introduce a novel free-electron laser approach that overcomes these limitations by pre-modulating a relativistic electr… ▽ More High-power, continuously tunable narrowband terahertz (THz) sources are essential for advancing nonlinear optics, THz-driven material dynamics, and ultrafast spectroscopy. Conventional techniques typically impose a trade-off between pulse energy and frequency tunability. Here, we introduce a novel free-electron laser approach that overcomes these limitations by pre-modulating a relativistic electron beam with a frequency-beating laser pulse and leveraging bunch compression along with collective effects to enhance microbunching. Experimental results demonstrate that this technique generates narrowband THz emission with continuous frequency tunability from 7.8 to 30.8THz, achieving pulse energies up to 385μJ while maintaining spectral bandwidths between 7.7% and 14.7%. Moreover, the method exhibits exceptional robustness and scalability, highlighting its unique ability to bridge the long-standing THz gap and offering a promising solution for diverse cutting-edge scientific applications. △ Less

Submitted 2 April, 2025; originally announced April 2025.

Beam test result and digitization of TaichuPix-3: A Monolithic Active Pixel Sensors for CEPC vertex detector

Authors: Hancen Lu, Tianyuan Zhang, Chang Xu, Shuqi Li, Xinhui Huang, Jia Zhou, Ziyue Yan, Wei Wang, Hao Zeng, Xuewei Jia, Yiming Hu, Xiaoxu Zhang, Zhijun Liang, Wei Wei, Ying Zhang, Xiaomin Wei, Tianya Wu, Lei Zhang, Ming Qi, Jun Hu, Jinyu Fu, Hongyu Zhang, Gang Li, Linghui Wu, Mingyi Dong , et al. (9 additional authors not shown)

Abstract: The Circular Electron-Positron Collider (CEPC), as the next-generation electron-positron collider, is tasked with advancing not only Higgs physics but also the discovery of new physics. Achieving these goals requires high-precision measurements of particles. Taichu seires, Monolithic Active Pixel Sensor (MAPS), a key component of the vertex detector for CEPC was designed to meet the CEPC's require… ▽ More The Circular Electron-Positron Collider (CEPC), as the next-generation electron-positron collider, is tasked with advancing not only Higgs physics but also the discovery of new physics. Achieving these goals requires high-precision measurements of particles. Taichu seires, Monolithic Active Pixel Sensor (MAPS), a key component of the vertex detector for CEPC was designed to meet the CEPC's requirements. For the geometry of vertex detector is long barrel with no endcap, and current silicon lacks a complete digitization model, precise estimation of cluster size particularly causing by particle with large incident angle is needed. Testbeam results were conducted at the Beijing Synchrotron Radiation Facility (BSRF) to evaluate cluster size dependence on different incident angles and threshold settings. Experimental results confirmed that cluster size increases with incident angle. Simulations using the Allpix$^2$ framework replicated experimental trends at small angles but exhibited discrepancies at large angles, suggesting limitations in linear electric field assumptions and sensor thickness approximations. The results from both testbeam and simulations have provided insights into the performance of the TaichuPix chip at large incident angles, offering a crucial foundation for the establishment of a digital model and addressing the estimation of cluster size in the forward region of the long barrel. Furthermore, it offers valuable references for future iterations of TaichuPix, the development of digital models, and the simulation and estimation of the vertex detector's performance. △ Less

Submitted 10 March, 2025; v1 submitted 7 March, 2025; originally announced March 2025.

A compact unshielded optically-pumped magnetic gradiometer

Authors: Hangfei Ye, Chenlu Xu, Min Hu, Haifeng Dong

Abstract: Optically-pumped magnetic gradiometers (OPGs) play a crucial role in applications such as magnetic anomaly detection and bio-magnetic measurements. This study classifies current OPGs into four types based on their differential modes: voltage, frequency, optical rotation, and magnetic field differential modes. We introduce the concept of inherent Common-Mode Rejection Ratio (CMRR) and analyze the d… ▽ More Optically-pumped magnetic gradiometers (OPGs) play a crucial role in applications such as magnetic anomaly detection and bio-magnetic measurements. This study classifies current OPGs into four types based on their differential modes: voltage, frequency, optical rotation, and magnetic field differential modes. We introduce the concept of inherent Common-Mode Rejection Ratio (CMRR) and analyze the differences between the inherent CMRR and the measured CMRR, as well as the upper limit of inherent CMRR. We point out that although magnetic field differential method has the potential to increase inherent CMRR by a factor of 1+AF, the difference between the feedback gains is often neglected, which may set the limit of inherent CMRR. We designed and fabricated a compact, unshielded OPG with a specially designed scheme to minimize the distance between the sensing heads and the magnetic source. Measurement results demonstrate a measured CMRR of 1200@1Hz and a sensitivity of approximately 5 pT/cm/\sqrt{Hz} from 1 Hz to 100 Hz. △ Less

Submitted 4 March, 2025; originally announced March 2025.

Simulation of the Background from $^{13}$C$(α, n)^{16}$O Reaction in the JUNO Scintillator

Authors: JUNO Collaboration, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Costas Andreopoulos, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Beretta, Antonio Bergnoli, Nikita Bessonov, Daniel Bick, Lukas Bieger, Svetlana Biktemerova , et al. (608 additional authors not shown)

Abstract: Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$)… ▽ More Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$) reactions. In organic liquid scintillator detectors, $α$ particles emitted from intrinsic contaminants such as $^{238}$U, $^{232}$Th, and $^{210}$Pb/$^{210}$Po, can be captured on $^{13}$C nuclei, followed by the emission of a MeV-scale neutron. Three distinct interaction mechanisms can produce prompt energy depositions preceding the delayed neutron capture, leading to a pair of events correlated in space and time within the detector. Thus, ($α, n$) reactions represent an indistinguishable background in liquid scintillator-based antineutrino detectors, where their expected rate and energy spectrum are typically evaluated via Monte Carlo simulations. This work presents results from the open-source SaG4n software, used to calculate the expected energy depositions from the neutron and any associated de-excitation products. Also simulated is a detailed detector response to these interactions, using a dedicated Geant4-based simulation software from the JUNO experiment. An expected measurable $^{13}$C$(α, n)^{16}$O event rate and reconstructed prompt energy spectrum with associated uncertainties, are presented in the context of JUNO, however, the methods and results are applicable and relevant to other organic liquid scintillator neutrino detectors. △ Less

Submitted 2 May, 2025; v1 submitted 2 March, 2025; originally announced March 2025.

Comments: 25 pages, 14 figures, 4 tables

Mechanical non-reciprocity programmed by shear jamming in soft composite solids

Authors: Chang Xu, Shuaihu Wang, Hong Wang, Xu Liu, Zemin Liu, Yiqiu Zhao, Wenqi Hu, Qin Xu

Abstract: Mechanical non-reciprocity-manifested as asymmetric responses to opposing mechanical stimuli-has traditionally been achieved through intricate structural nonlinearities in metamaterials. However, continuum solids with inherent non-reciprocal mechanics remain underexplored, despite their promising potential for applications such as wave guiding, robotics, and adaptive materials. Here, we introduce… ▽ More Mechanical non-reciprocity-manifested as asymmetric responses to opposing mechanical stimuli-has traditionally been achieved through intricate structural nonlinearities in metamaterials. However, continuum solids with inherent non-reciprocal mechanics remain underexplored, despite their promising potential for applications such as wave guiding, robotics, and adaptive materials. Here, we introduce a design principle by employing the shear jamming transition from granular physics to engineering non-reciprocal mechanics in soft composite solids. Through the control of the interplay between inclusion contact networks and matrix elasticity, we achieve tunable, direction-dependent asymmetry in both shear and normal mechanical responses. In addition to static regimes, we demonstrate programmable non-reciprocal dynamics by combining responsive magnetic profiles with the anisotropic characteristics of shear-jammed systems. This strategy enables asymmetric spatiotemporal control over motion transmission, a previously challenging feat in soft materials. Our work establishes a novel paradigm for designing non-reciprocal matter, bridging granular physics with soft material engineering to realize functionalities essential for mechano-intelligent systems. △ Less

Submitted 24 February, 2025; originally announced February 2025.

Spreading dynamics of information on online social networks

Authors: Fanhui Meng, Jiarong Xie, Jiachen Sun, Cong Xu, Yutian Zeng, Xiangrong Wang, Tao Jia, Shuhong Huang, Youjin Deng, Yanqing Hu

Abstract: Social media is profoundly changing our society with its unprecedented spreading power. Due to the complexity of human behaviors and the diversity of massive messages, the information spreading dynamics are complicated, and the reported mechanisms are different and even controversial. Based on data from mainstream social media platforms, including WeChat, Weibo, and Twitter, cumulatively encompass… ▽ More Social media is profoundly changing our society with its unprecedented spreading power. Due to the complexity of human behaviors and the diversity of massive messages, the information spreading dynamics are complicated, and the reported mechanisms are different and even controversial. Based on data from mainstream social media platforms, including WeChat, Weibo, and Twitter, cumulatively encompassing a total of 7.45 billion users, we uncover a ubiquitous mechanism that the information spreading dynamics are basically driven by the interplay of social reinforcement and social weakening effects. Accordingly, we propose a concise equation, which, surprisingly, can well describe all the empirical large-scale spreading trajectories. Our theory resolves a number of controversial claims and satisfactorily explains many phenomena previously observed. It also reveals that the highly clustered nature of social networks can lead to rapid and high-frequency information bursts with relatively small coverage per burst. This vital feature enables social media to have a high capacity and diversity for information dissemination, beneficial for its ecological development. △ Less

Submitted 11 February, 2025; originally announced February 2025.

Comments: 11 pages, 4 figures,

Optimizing Carbon Footprint in ICT through Swarm Intelligence with Algorithmic Complexity

Authors: Vasileios Alevizos, Nikitas Gerolimos, Sabrina Edralin, Clark Xu, Akebu Simasiku, Georgios Priniotakis, George Papakostas, Zongliang Yue

Abstract: Global emissions from fossil fuel combustion and cement production were recorded in 2022, signaling a resurgence to pre-pandemic levels and providing an apodictic indication that emission peaks have not yet been achieved. Significant contributions to this upward trend are made by the Information and Communication Technology (ICT) industry due to its substantial energy consumption. This shows the n… ▽ More Global emissions from fossil fuel combustion and cement production were recorded in 2022, signaling a resurgence to pre-pandemic levels and providing an apodictic indication that emission peaks have not yet been achieved. Significant contributions to this upward trend are made by the Information and Communication Technology (ICT) industry due to its substantial energy consumption. This shows the need for further exploration of swarm intelligence applications to measure and optimize the carbon footprint within ICT. All causative factors are evaluated based on the quality of data collection; variations from each source are quantified; and an objective function related to carbon footprint in ICT energy management is optimized. Emphasis is placed on the asyndetic integration of data sources to construct a convex optimization problem. An apodictic necessity to prevent the erosion of accuracy in carbon footprint assessments is addressed. Complexity percentages ranged from 5.25% for the Bat Algorithm to 7.87% for Fast Bacterial Swarming, indicating significant fluctuations in resource intensity among algorithms. These findings suggest that we were able to quantify the environmental impact of various swarm algorithms. △ Less

Submitted 19 January, 2025; originally announced January 2025.

"Molecular waveplate" for the control of ultrashort pulses carrying orbital angular momentum

Authors: Chengqing Xu, Lixin He, Wanchen Tao, Xiaosong Zhu, Feng Wang, Long Xu, Lu Xu, Pengfei Lan, Ilya Averbukh, Yehiam Prior, Peixiang Lu

Abstract: Ultrashort laser pulses carrying orbital angular momentum (OAM) have become essential tools in Atomic, Molecular, and Optical (AMO) studies, particularly for investigating strong-field light-matter interactions. However, controlling and generating ultrashort vortex pulses presents significant challenges, since their broad spectral content complicates manipulation with conventional optical elements… ▽ More Ultrashort laser pulses carrying orbital angular momentum (OAM) have become essential tools in Atomic, Molecular, and Optical (AMO) studies, particularly for investigating strong-field light-matter interactions. However, controlling and generating ultrashort vortex pulses presents significant challenges, since their broad spectral content complicates manipulation with conventional optical elements, while the high peak power inherent in short-duration pulses risks damaging optical components. Here, we introduce a novel method for generating and controlling broadband ultrashort vortex beams by exploiting the non-adiabatic alignment of linear gas-phase molecules induced by vector beams. The interaction between the vector beam and the gas-phase molecules results in spatially varying polarizability, imparting a phase modulation to a probe laser. This process effectively creates a tunable ``molecular waveplate'' that adapts naturally to a broad spectral range. By leveraging this approach, we can generate ultrashort vortex pulses across a wide range of wavelengths. Under optimized gas pressure and interaction length conditions, this method allows for highly efficient conversion of circularly polarized light into the desired OAM pulse, thus enabling the generation of few-cycle, high-intensity vortex beams. This molecular waveplate, which overcomes the limitations imposed by conventional optical elements, opens up new possibilities for exploring strong-field physics, ultrafast science, and other applications that require high-intensity vortex beams. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Comments: 7 pages, 5 figures

Quantifying Argon Concentration within Insulating Glass Units using Low Frequency Ultrasonic Technique

Authors: Hamed Khaleghi, Parisa Salehi, Chenxi Xu, Didem Ozevin, Aslihan Karatas

Abstract: Insulating glass units (IGUs) account for over 30% of thermal transmission losses in building envelopes. To mitigate this, IGUs are often filled with low-conductivity gases like Argon. However, Argon concentration decreases over time due to IGU aging and manufacturing processes, which lessens their insulating effectiveness. This study presents a novel nondestructive methodology to quantify Argon c… ▽ More Insulating glass units (IGUs) account for over 30% of thermal transmission losses in building envelopes. To mitigate this, IGUs are often filled with low-conductivity gases like Argon. However, Argon concentration decreases over time due to IGU aging and manufacturing processes, which lessens their insulating effectiveness. This study presents a novel nondestructive methodology to quantify Argon concentration in IGUs using ultrasonic technique. The ultrasonic energy transmitted through the IGU is correlated with Argon concentration, validated through both experimental measurements and numerical models using COMSOL Multiphysics. The models simulate acoustic-structure interaction by adjusting gas density to reflect Argon presence, showing increased ultrasonic energy with higher Argon concentrations. Experimental measurements on two IGU samples with twenty Argon-air mixtures (ranging from 100% to 25% Argon) show that the proposed ultrasonic technique achieves a mean absolute error of 0.13, outperforming Spark Emission Spectroscopy and Helantec ISO-GAS-Control, which have errors of 2.31 and 0.33, respectively. △ Less

Submitted 3 February, 2025; v1 submitted 17 January, 2025; originally announced January 2025.

Comments: This version of the paper lacks essential data and discussions that are crucial for accurately conveying the study's findings. Due to the significance of the missing content, a minor revision would not be sufficient to address these gaps. Therefore, I am withdrawing the paper to prevent potential misinterpretations

High-speed readout for direct light orbital angular momentum photodetector via photoelastic modulation

Authors: Dehong Yang, Chang Xu, Jiawei Lai, Zipu Fan, Delang Liang, Shiyu Wang, Jinluo Cheng, Dong Sun

Abstract: Recent progress in direct photodetection of light orbital angular momentum (OAM) based on the orbital photogalvanic effect (OPGE) provides an effective way for on-chip direct electric readout of orbital angular momentum, as well as large-scale integration focal-plane array devices. However, the recognition of OAM order from photocurrent response requires the extraction of circular polarization-dep… ▽ More Recent progress in direct photodetection of light orbital angular momentum (OAM) based on the orbital photogalvanic effect (OPGE) provides an effective way for on-chip direct electric readout of orbital angular momentum, as well as large-scale integration focal-plane array devices. However, the recognition of OAM order from photocurrent response requires the extraction of circular polarization-dependent response. To date, the operation speed of such detector is currently at the minute level and is limited by slow mechanical polarization modulation and low OAM recognition capability. In this work, we demonstrate that the operation speed can be greatly improved via electrical polarization modulation strategy with photoelasitc modulator accompanied by phase-locked readout approach with lock-in amplifier. We demonstrate an operation speed of up to 1 kHz with this new technology in the mid-infrared region (4 μm) on an OAM detector using multilayer graphene (MLG) as photosensitive material. In principle, with new modulation and readout scheme, we can potentially increase the operation speed to 50.14 kHz with a PEM that operates at a state-of-the-art speed. Our work paves the way toward high-speed operation of direct OAM detection devices based on OPGE effect and pushes such technology to a more practical stage for focal plane array applications. △ Less

Submitted 16 January, 2025; originally announced January 2025.

Comments: 27 pages,5 figures

Metamaterial sound absorbers based on microperforated panels: an approach toward enhanced flexibility and near-limit broadband performance

Authors: Jinjie Shi, Jie Luo, Chenkai Liu, Hongchen Chu, Yongxin Jing, Changqing Xu, Xiaozhou Liu, Jensen Li, Yun Lai

Abstract: Traditional microperforated panels (MPPs) and metamaterial-based sound absorbers rely on local resonances or multi-resonator designs, which limit their bandwidth, angular applicability, and ease of fabrication. Leveraging the reciprocity theorem and cavity resonances, we introduce a new class of robust MPP absorbers, termed meta-MPPs, capable of achieving ultrabroadband near-total sound absorption… ▽ More Traditional microperforated panels (MPPs) and metamaterial-based sound absorbers rely on local resonances or multi-resonator designs, which limit their bandwidth, angular applicability, and ease of fabrication. Leveraging the reciprocity theorem and cavity resonances, we introduce a new class of robust MPP absorbers, termed meta-MPPs, capable of achieving ultrabroadband near-total sound absorption across a range of 0.37 to 10 kHz. These absorbers demonstrate average performance exceeding that of traditional MPPs by over 100%, approaching the theoretical causality limit. Notably, their absorption performance can be tuned between angularly asymmetric and omnidirectional modes and remains highly robust to variations in MPP parameters and geometrical configurations. Validated through simulations and experiments, our findings present a simpler, more robust, and highly adaptable solution for noise control. △ Less

Submitted 21 January, 2025; v1 submitted 12 January, 2025; originally announced January 2025.

Measurement of surface tension coefficients of liquids based on equal thickness interference

Authors: Ziyi Xu, Chongyuan Xu, Liwen Tong, Keyu Chen, Ziwei Dong

Abstract: The surface tension coefficient is a key parameter in fluid mechanics. The conventional method to measure it is to determine the critical surface tension that causes the rupture of a liquid film. However, this method has a large error because the surface tension coefficient is very sensitive to environmental factors. In this paper, we propose a new method based on equal thickness interference to s… ▽ More The surface tension coefficient is a key parameter in fluid mechanics. The conventional method to measure it is to determine the critical surface tension that causes the rupture of a liquid film. However, this method has a large error because the surface tension coefficient is very sensitive to environmental factors. In this paper, we propose a new method based on equal thickness interference to study the mathematical model of the stationary liquid surface shape and measure it by the interference technique. This method enables the accurate measurement of the liquid surface tension coefficient. The experimental results demonstrate that this method has the advantages of high accuracy, low cost, and simple instrumentation. The maximum measurement error is less than 3.1\%. Moreover, this method can be applied to measure the liquid-liquid interfacial tension, which has a good application prospect. △ Less

Submitted 9 January, 2025; originally announced January 2025.

A self-learning magnetic Hopfield neural network with intrinsic gradient descent adaption

Authors: Chang Niu, Huanyu Zhang, Chuanlong Xu, Wenjie Hu, Yunzhuo Wu, Yu Wu, Yadi Wang, Tong Wu, Yi Zhu, Yinyan Zhu, Wenbin Wang, Yizheng Wu, Lifeng Yin, Jiang Xiao, Weichao Yu, Hangwen Guo, Jian Shen

Abstract: Physical neural networks using physical materials and devices to mimic synapses and neurons offer an energy-efficient way to implement artificial neural networks. Yet, training physical neural networks are difficult and heavily relies on external computing resources. An emerging concept to solve this issue is called physical self-learning that uses intrinsic physical parameters as trainable weight… ▽ More Physical neural networks using physical materials and devices to mimic synapses and neurons offer an energy-efficient way to implement artificial neural networks. Yet, training physical neural networks are difficult and heavily relies on external computing resources. An emerging concept to solve this issue is called physical self-learning that uses intrinsic physical parameters as trainable weights. Under external inputs (i.e. training data), training is achieved by the natural evolution of physical parameters that intrinsically adapt modern learning rules via autonomous physical process, eliminating the requirements on external computation resources.Here, we demonstrate a real spintronic system that mimics Hopfield neural networks (HNN) and unsupervised learning is intrinsically performed via the evolution of physical process. Using magnetic texture defined conductance matrix as trainable weights, we illustrate that under external voltage inputs, the conductance matrix naturally evolves and adapts Oja's learning algorithm in a gradient descent manner. The self-learning HNN is scalable and can achieve associative memories on patterns with high similarities. The fast spin dynamics and reconfigurability of magnetic textures offer an advantageous platform towards efficient autonomous training directly in materials. △ Less

Submitted 6 January, 2025; v1 submitted 3 January, 2025; originally announced January 2025.

Comments: 21 pages, 5 figures

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 121 (51) e2416294121,(2024)

Single-molecule Surface-Induced Fluorescence Attenuation Based on Reduced Graphene Oxide

Authors: Q. Fan, C. Yang, S. Hu, C. Xu, M. Li, Y. Lu

Abstract: Single-molecule surface-induced fluorescence attenuation (smSIFA) is a precise method for studying the vertical movement of biological macromolecules using two-dimensional material acceptors. Unlike other methods, smSIFA is not influenced by the planar motion of membranes or proteins. However, the detection range and accuracy of vertical movement are dependent on the properties of these two-dimens… ▽ More Single-molecule surface-induced fluorescence attenuation (smSIFA) is a precise method for studying the vertical movement of biological macromolecules using two-dimensional material acceptors. Unlike other methods, smSIFA is not influenced by the planar motion of membranes or proteins. However, the detection range and accuracy of vertical movement are dependent on the properties of these two-dimensional materials. Recently, smSIFA utilizing graphene oxide and graphene has significantly advanced the study of biomacromolecules, although the detection range is restricted by their inherent quenching distances. Modifying these distances necessitates the replacement of the medium material, which presents challenges in material selection and preparation. Consequently, there is a pressing need to develop controllable materials for smSIFA applications. In this study, we enhance the smSIFA technique using graphene oxide as the medium acceptor through thermal reduction. By adjusting the reduction temperature, we prepare reduced graphene oxides at varying degrees of reduction, thus fine-tuning the quenching distances. The adjustment of these distances is measured using fluorescently labeled DNA. This modified smSIFA approach, employing reduced graphene oxide, is then applied to observe conformational changes in the Holliday junction, demonstrating the enhanced detection capabilities of reduced graphene oxide. △ Less

Submitted 27 December, 2024; originally announced December 2024.

Comments: 13 pages, 4 figures, 2 tables

Journal ref: Acta Physica Sinica, 2023, 72(14): 147801

A total-shear-stress-conserved wall model for large-eddy simulation of high-Reynolds number wall turbulence

Authors: Huan-Cong Liu, Chun-Xiao Xu, Wei-Xi Huang

Abstract: Wall-modeled large-eddy simulation (WMLES) is widely recognized as a useful method for simulation of turbulent flows at high Reynolds numbers. Nevertheless, a continual issue in different wall models is the shift of the mean velocity profile from the wall-model/RANS (Reynolds-averaged Navier-Stokes) region to the LES region. This phenomenon, referred to as logarithmic layer mismatch (LLM), occurs… ▽ More Wall-modeled large-eddy simulation (WMLES) is widely recognized as a useful method for simulation of turbulent flows at high Reynolds numbers. Nevertheless, a continual issue in different wall models is the shift of the mean velocity profile from the wall-model/RANS (Reynolds-averaged Navier-Stokes) region to the LES region. This phenomenon, referred to as logarithmic layer mismatch (LLM), occurs in both wall shear stress models and hybrid RANS/LES models. Many efforts have been made to explain and resolve this mismatch, including decreasing the high correlation between the wall shear stress and the velocity at the matching layer, modifying the subgrid-scale (SGS) eddy viscosity, and adding a stochastic forcing. It is widely believed that the inclusion of the resolved Reynolds shear stress (or the convection term) is essential to elliminate the LLM, as it prevents the overseimation of the modeled Reynolds shear stress and promotes the generation of the small-scale flow structures in the near-wall region. In this work, by comparing three different SGS eddy viscosity models, we demonstrate that ensuring the total shear stress conservation (TSSC) conservation is key to resolving the LLM. Under the TSSC framework, the effect of the convection term on LLM can be quantitatively assessed. Furthermore, a modified SGS eddy viscosity modfication model that adheres to the TSSC constraint is tested at different Reynolds numbers ($Re_τ=1000, 2000, 4200$). Our results demonstrate the robust performance of the present model in predicting skin friction and low-order turbulence statistics, even under a relatively low grid resolution ($Δx^+, Δz^+ \lesssim 500$, $2\leq Δ_x/Δ_{y,mat} \leq 4$, where $Δ_{y,mat}$ is the wall-normal grid spacing in the wall-model region). △ Less

Submitted 19 November, 2024; originally announced November 2024.

Intertwined effects of elastic deformation and damage on vortex pinning and Jc degradation in polycrystalline superconductors

Authors: Qing-Yu Wang, Shuai Hu, You-He Zhou, Cun Xue

Abstract: The damage and the critical current density (Jc) degradation of polycrystalline superconductors induced by strain dramatically influence their performance in applications. Unfortunately, the state-of-the-art experimental techniques are unable to detect the damage of internal polycrystalline structures and the microscopic superconductivity in the presence of strain. We propose a groundbreaking mult… ▽ More The damage and the critical current density (Jc) degradation of polycrystalline superconductors induced by strain dramatically influence their performance in applications. Unfortunately, the state-of-the-art experimental techniques are unable to detect the damage of internal polycrystalline structures and the microscopic superconductivity in the presence of strain. We propose a groundbreaking multi-scale theoretical framework aimed at revealing the underlying physical mechanisms of the reversible and irreversible Jc degradation induced by the strain through tackling the complex intertwined effects of elastic deformation and damage on the superconductivity of grain boundaries and the associated vortex pinning. The results are well validated by experimental measurements. Utilizing the benchmarked physical model, we demonstrate that the damage evolutions of polycrystalline superconductors in the presence of strain can be approximately estimated by means of the electromagnetic experiments on Jc. Furthermore, we also discuss the characteristics of damage and Jc degradation of polycrystalline superconductors subjected to biaxial mechanical loads. The findings will pave the way to investigate the tunable vortex pinning and Jc of superconductors by strain, and to develop a brand new electromagnetic method to manifest the damage of polycrystalline superconductors. △ Less

Submitted 27 November, 2024; v1 submitted 18 November, 2024; originally announced November 2024.

Comments: 13 pages, 4figures

Interactions between the near-wall turbulent structures and heavy particles in compressible turbulent boundary layers

Authors: Ming Yu, Lihao Zhao, Yibin Du, Xianxu Yuan, Chunxiao Xu

Abstract: In the present study, we conduct direct numerical simulations to investigate the near-wall dynamics of compressible turbulent boundary layers at the free-stream Mach number of 6 laden with heavy particles. By inspecting the instantaneous near-wall flow structures, Reynolds stresses and the impacts of particle forces on solenoidal and dilatational motions, we observed that higher particle mass load… ▽ More In the present study, we conduct direct numerical simulations to investigate the near-wall dynamics of compressible turbulent boundary layers at the free-stream Mach number of 6 laden with heavy particles. By inspecting the instantaneous near-wall flow structures, Reynolds stresses and the impacts of particle forces on solenoidal and dilatational motions, we observed that higher particle mass loadings lead to the less meandering yet almost equally intense velocity streaks, but the weakened wall-normal velocity fluctuations induced by vortices and near-wall dilatational motions organized as travelling wave packets. The strong correlation between the particle force and dilatational velocities indicates that particles are accelerated/decelerated while travelling through these travelling wave packets composed of expansive and compressive events, and in return, leading to the weakened dilatational motions of the fluid during this process. This correlation further supports the elucidation by Yu et al. (J. Fluid. Mech., vol. 984, 2024, pp. A44) that dilatational motions are generated by the vortices that induce strong bursting events, rather than the evolving perturbations beneath the velocity streaks. Nevertheless, the variation of skin friction in the presently considered cases with moderate mass loadings, either increased or decreased by the presence of particles, is found to be primarily attributed to the solenoidal Reynolds shear stress as in incompressible turbulence, suggesting the essentially unaltered nature of wall-bounded turbulence populated by vortical and shear motions instead of gradually switching to the state dominated by dilatational motions. △ Less

Submitted 18 October, 2024; originally announced October 2024.

Comments: 29 pages, 13 figures

Journal ref: J. Fluid Mech. 1010 (2025) A68

Exploring non-Euclidean photonics: Pseudosphere microlaser

Authors: H. Girin, S. Bittner, X. Checoury, D. Decanini, B. Dietz, A. Grigis, C. Lafargue, J. Zyss, C. Xu, P. Sebbah, M. Lebental

Abstract: Classical and wave properties of microlasers with the shape of a truncated pseudosphere are investigated through experiments and numerical simulations. These pseudosphere microlasers are surface-like organic microlasers with constant negative curvature, which were fabricated with high optical quality by direct laser writing. It is shown that they behave, in many ways, similar to two-dimensional fl… ▽ More Classical and wave properties of microlasers with the shape of a truncated pseudosphere are investigated through experiments and numerical simulations. These pseudosphere microlasers are surface-like organic microlasers with constant negative curvature, which were fabricated with high optical quality by direct laser writing. It is shown that they behave, in many ways, similar to two-dimensional flat disks, regardless of their different Gaussian curvature. We derive the monodromy matrices for geodesics on the pseudosphere and demonstrate that the periodic geodesics are marginally stable. Actually, due to the rotational symmetry, the pseudosphere is an integrable system. △ Less

Submitted 9 May, 2025; v1 submitted 9 October, 2024; originally announced October 2024.

Comments: 16 pages, 16 figures

Journal ref: Physical Review A, vol. 111, 043512 (2025)

Photoacoustic tracking of photo-magnetically powered nanoparticles for cancer therapy

Authors: Jiayan Li, Chang Xu, Yingna Chen, Junmei Cao, Wanli Ye, Yu Cheng, Qian Cheng

Abstract: The in vivo propulsion and monitoring of nanoparticles (NPs) have received tremendous achievements in the past decade. Developing functional NPs that can be efficiently manipulated inside the human body with a non-invasive tracking modality is critical to clinical translation. This study synthesized a photo-magnetically powered nanoparticle (PMN) with a Fe3O4 core and gold spiky surface. The Au-na… ▽ More The in vivo propulsion and monitoring of nanoparticles (NPs) have received tremendous achievements in the past decade. Developing functional NPs that can be efficiently manipulated inside the human body with a non-invasive tracking modality is critical to clinical translation. This study synthesized a photo-magnetically powered nanoparticle (PMN) with a Fe3O4 core and gold spiky surface. The Au-nanotips ensure PMNs have a strong light absorption in the second near-infrared (NIR) window and produce outstanding photoacoustic signals. The Bio-transmission electron microscopy and simulation results prove that the assembly of PMNs under a magnetic field further enhances the photothermal conversion in cells, contributing to the reduction of ambient viscosity. Photoacoustic imaging (PAI) realized real-time monitoring of PMN movements and revealed that laser plus magnetic coupling couldimprove intratumoral distribution and retention. The proposed methods exhibit excellent potential for the clinical research of cancer nanotherapies. △ Less

Submitted 4 October, 2024; originally announced October 2024.

Efficient, broadly-tunable source of megawatt pulses for multiphoton microscopy based on self-phase modulation in argon-filled hollow-core fiber

Authors: Yishai Eisenberg, Wenchao Wang, Shitong Zhao, Eric S. Hebert, Yi-Hao Chen, Dimitre G. Ouzounov, Hazuki Takahashi, Anna Gruzdeva, Aaron K. LaViolette, Moshe Labaz, Pavel Sidorenko, Enrique Antonio-Lopez, Rodrigo Amezcua-Correa, Nilay Yapici, Chris Xu, Frank Wise

Abstract: An exciting recent development for deep-tissue imaging with cellular resolution is three-photon fluorescence microscopy (3PM) with excitation at long wavelengths (1300 and 1700 nm). In the last few years, long-wavelength 3PM has driven rapid progress in deep-tissue imaging beyond the depth limit of two-photon microscopy, with impacts in neuroscience, immunology, and cancer biology. However, wide a… ▽ More An exciting recent development for deep-tissue imaging with cellular resolution is three-photon fluorescence microscopy (3PM) with excitation at long wavelengths (1300 and 1700 nm). In the last few years, long-wavelength 3PM has driven rapid progress in deep-tissue imaging beyond the depth limit of two-photon microscopy, with impacts in neuroscience, immunology, and cancer biology. However, wide adoption of 3PM faces challenges. Three-photon excitation (3PE) is naturally weaker than two-photon excitation, which places a premium on ultrashort pulses with high peak power. The inefficiency, complexity, and cost of current sources of these pulses present major barriers to the use of 3PM in typical biomedical research labs. Here, we describe a fiber-based source of femtosecond pulses with multi-megawatt peak power, tunable from 850 nm to 1700 nm. Compressed pulses from a fiber amplifier at 1030~nm are launched into an antiresonant hollow-core fiber filled with argon. By varying only the gas pressure, pulses with hundreds of nanojoules of energy and sub-100 fs duration are obtained at wavelengths between 850 and 1700 nm. This approach is a new route to an efficient, robust, and potentially low-cost source for multiphoton deep-tissue imaging. In particular, 960-nJ and 50-fs pulses are generated at 1300 nm with a conversion efficiency of 10\%. The nearly 20-MW peak power is an order of magnitude higher than the previous best from femtosecond fiber source at 1300~nm. As an example of the capabilities of the source, these pulses are used to image structure and neuronal activity in mouse brain as deep as 1.1 mm below the dura. △ Less

Submitted 1 October, 2024; originally announced October 2024.

Comments: Supplement appended at end

Deep Learning Enhanced Quantum Holography with Undetected Photons

Authors: Weiru Fan, Gewei Qian, Yutong Wang, Chen-Ran Xu, Ziyang Chen, Xun Liu, Wei Li, Xu Liu, Feng Liu, Xingqi Xu, Da-Wei Wang, Vladislav V. Yakovlev

Abstract: Holography is an essential technique of generating three-dimensional images. Recently, quantum holography with undetected photons (QHUP) has emerged as a groundbreaking method capable of capturing complex amplitude images. Despite its potential, the practical application of QHUP has been limited by susceptibility to phase disturbances, low interference visibility, and limited spatial resolution. D… ▽ More Holography is an essential technique of generating three-dimensional images. Recently, quantum holography with undetected photons (QHUP) has emerged as a groundbreaking method capable of capturing complex amplitude images. Despite its potential, the practical application of QHUP has been limited by susceptibility to phase disturbances, low interference visibility, and limited spatial resolution. Deep learning, recognized for its ability in processing complex data, holds significant promise in addressing these challenges. In this report, we present an ample advancement in QHUP achieved by harnessing the power of deep learning to extract images from single-shot holograms, resulting in vastly reduced noise and distortion, alongside a notable enhancement in spatial resolution. The proposed and demonstrated deep learning QHUP (DL-QHUP) methodology offers a transformative solution by delivering high-speed imaging, improved spatial resolution, and superior noise resilience, making it suitable for diverse applications across an array of research fields stretching from biomedical imaging to remote sensing. DL-QHUP signifies a crucial leap forward in the realm of holography, demonstrating its immense potential to revolutionize imaging capabilities and pave the way for advancements in various scientific disciplines. The integration of DL-QHUP promises to unlock new possibilities in imaging applications, transcending existing limitations and offering unparalleled performance in challenging environments. △ Less

Submitted 27 September, 2024; originally announced September 2024.

Journal ref: PhotoniX 5, 40 (2024)

Microsecond-Latency Feedback at a Particle Accelerator by Online Reinforcement Learning on Hardware

Authors: Luca Scomparin, Michele Caselle, Andrea Santamaria Garcia, Chenran Xu, Edmund Blomley, Timo Dritschler, Akira Mochihashi, Marcel Schuh, Johannes L. Steinmann, Erik Bründermann, Andreas Kopmann, Jürgen Becker, Anke-Susanne Müller, Marc Weber

Abstract: The commissioning and operation of future large-scale scientific experiments will challenge current tuning and control methods. Reinforcement learning (RL) algorithms are a promising solution thanks to their capability of autonomously tackling a control problem based on a task parameterized by a reward function. The conventionally utilized machine learning (ML) libraries are not intended for micro… ▽ More The commissioning and operation of future large-scale scientific experiments will challenge current tuning and control methods. Reinforcement learning (RL) algorithms are a promising solution thanks to their capability of autonomously tackling a control problem based on a task parameterized by a reward function. The conventionally utilized machine learning (ML) libraries are not intended for microsecond latency applications, as they mostly optimize for throughput performance. On the other hand, most of the programmable logic implementations are meant for computation acceleration, not being intended to work in a real-time environment. To overcome these limitations of current implementations, RL needs to be deployed on-the-edge, i.e. on to the device gathering the training data. In this paper we present the design and deployment of an experience accumulator system in a particle accelerator. In this system deep-RL algorithms run using hardware acceleration and act within a few microseconds, enabling the use of RL for control of ultra-fast phenomena. The training is performed offline to reduce the number of operations carried out on the acceleration hardware. The proposed architecture was tested in real experimental conditions at the Karlsruhe research accelerator (KARA), serving also as a synchrotron light source, where the system was used to control induced horizontal betatron oscillations in real-time. The results showed a performance comparable to the commercial feedback system available at the accelerator, proving the viability and potential of this approach. Due to the self-learning and reconfiguration capability of this implementation, its seamless application to other control problems is possible. Applications range from particle accelerators to large-scale research and industrial facilities. △ Less

Submitted 24 September, 2024; originally announced September 2024.

GeSn 320 \times 256 Focal Plane Array for Silicon-Based Short-wave Infrared Imaging

Authors: Guoyin Xu, Hui Cong, Yue Li, Zhengjie Wu, Fenghe Fu, Ping Chen, Chao Zhao, Chi Xu, Chunlai Xue

Abstract: Short-wave infrared (SWIR) imaging arrays have demonstrated great potential in applications spanning from military to civilian consumer electronics. However, the current focal plane arrays (FPAs), which are based on compound semiconductors, have limited applications in civilian circumstances due to elevated manufacturing costs and prolonged fabrication cycle time. To address this, a high-performan… ▽ More Short-wave infrared (SWIR) imaging arrays have demonstrated great potential in applications spanning from military to civilian consumer electronics. However, the current focal plane arrays (FPAs), which are based on compound semiconductors, have limited applications in civilian circumstances due to elevated manufacturing costs and prolonged fabrication cycle time. To address this, a high-performance 320 $\times$ 256 focal plane array based on group-IV semiconductors has been designed and manufactured on a Si substrate using a complementary metal-oxide semiconductor (CMOS) compatible fabrication process. The optical absorption layer is composed of GeSn alloy, whose bandgap could be tailored by choosing the appropriate Sn concentration. In this work, a 10% Sn concentration was employed, yielding a response cutoff wavelength of 2308 nm for the Si-based photodetector, which was measured at 298 K. Moreover, a specific detectivity of 9.7 $\times$ 10$^{11}$ cm$\cdot$ Hz$^{1/2}$ $\cdot$ W$^{-1}$ has been achieved at 77 K, surpassing all previously reported GeSn devices, and rivals commercial extended InGaAs photodetectors. With the help of read-out circuits (ROIC), SWIR images have been successfully captured for the first time by using Si-based GeSn FPA. This work demonstrates the potential of group IV imaging arrays for various applications in the commercial SWIR imaging field. △ Less

Submitted 19 September, 2024; originally announced September 2024.

Optical RISs Improve the Secret Key Rate of Free-Space QKD in HAP-to-UAV Scenarios

Authors: Phuc V. Trinh, Shinya Sugiura, Chao Xu, Lajos Hanzo

Abstract: Large optical reconfigurable intelligent surfaces (ORISs) are proposed for employment on building rooftops to facilitate free-space quantum key distribution (QKD) between highaltitude platforms (HAPs) and low-altitude platforms (LAPs). Due to practical constraints, the communication terminals can only be positioned beneath the LAPs, preventing direct upward links to HAPs. By deploying ORISs on roo… ▽ More Large optical reconfigurable intelligent surfaces (ORISs) are proposed for employment on building rooftops to facilitate free-space quantum key distribution (QKD) between highaltitude platforms (HAPs) and low-altitude platforms (LAPs). Due to practical constraints, the communication terminals can only be positioned beneath the LAPs, preventing direct upward links to HAPs. By deploying ORISs on rooftops to reflect the beam arriving from HAPs towards LAPs from below, reliable HAP-to-LAP links can be established. To accurately characterize the optical beam propagation, we develop an analytical channel model based on extended Huygens-Fresnel principles for representing both the atmospheric turbulence effects and the hovering fluctuations of LAPs. This model facilitates adaptive ORIS beam-width control through linear, quadratic, and focusing phase shifts, which are capable of effectively mitigating the detrimental effects of beam broadening and pointing errors (PE). Consequently, the information-theoretic bound of the secret key rate and the security performance of a decoy-state QKD protocol are analyzed. Our findings demonstrate that quadratic phase shifts enhance the SKR at high HAP-ORIS zenith angles or mild PE conditions by narrowing the beam to optimal sizes. By contrast, linear phase shifts are advantageous at low HAP-ORIS zenith angles or moderate-to-high PE by diverging the beam to mitigate LAP fluctuations. △ Less

Submitted 20 December, 2024; v1 submitted 12 August, 2024; originally announced August 2024.

Comments: 16 pages, 11 figures, 4 tables

Deterministic and Efficient Switching of Sliding Ferroelectrics

Authors: Shihan Deng, Hongyu Yu, Junyi Ji, Changsong Xu, Hongjun Xiang

Abstract: Recent studies highlight the scientific importance and broad application prospects of two-dimensional (2D) sliding ferroelectrics, which prevalently exhibit vertical polarization with suitable stackings. It is crucial to understand the mechanisms of sliding ferroelectricity and to deterministically and efficiently switch the polarization with optimized electric fields. Here, applying our newly dev… ▽ More Recent studies highlight the scientific importance and broad application prospects of two-dimensional (2D) sliding ferroelectrics, which prevalently exhibit vertical polarization with suitable stackings. It is crucial to understand the mechanisms of sliding ferroelectricity and to deterministically and efficiently switch the polarization with optimized electric fields. Here, applying our newly developed DREAM-Allegro multi-task equivariant neural network, which simultaneously predicts interatomic potentials and Born effective charges, we construct a comprehensive potential for boron nitride ($\mathrm{BN}$) bilayer. The molecular dynamics simulations reveal a remarkably high Curie temperature of up to 1500K, facilitated by robust intralayer chemical bonds and delicate interlayer van der Waals(vdW) interactions. More importantly, it is found that, compared to the out-of-plane electric field, the inclined field not only leads to deterministic switching of electric polarization, but also largely lower the critical strength of field, due to the presence of the in-plane polarization in the transition state. This strategy of an inclined field is demonstrated to be universal for other sliding ferroelectric systems with monolayer structures belonging to the symmetry group $p \bar{6} m 2$, such as transition metal dichalcogenides (TMDs). △ Less

Submitted 21 July, 2024; originally announced July 2024.

Comments: Main text: 16 pages, 4 figures. Supplementary: 9 pages, 6 figures

Harnessing Zn-Volatility for Compositional Tuning in PtZn Nanoalloy Catalysts

Authors: Bingqing Yao, Chaokai Xu, Yaxin Tang, Yankun Du, Shengdong Tan, Sheng Dai, Guangfu Luo, Qian He

Abstract: Bimetallic nanoalloys have gained extensive attention due to their tunable properties and wide range of catalytic applications. However, achieving good compositional control in nanoalloy catalysts remains a formidable challenge. In this work, we demonstrate that heat treatment can be used to tune the composition of Pt-Zn nanoalloy catalysts, leveraging the volatile nature of zinc to enhance their… ▽ More Bimetallic nanoalloys have gained extensive attention due to their tunable properties and wide range of catalytic applications. However, achieving good compositional control in nanoalloy catalysts remains a formidable challenge. In this work, we demonstrate that heat treatment can be used to tune the composition of Pt-Zn nanoalloy catalysts, leveraging the volatile nature of zinc to enhance their performance in propane dehydrogenation. Through identical location (scanning) transmission electron microscopy (IL-(S)TEM) using an in-situ EM gas cell, as well as other complementary techniques, we observed that the zinc content of the Pt-Zn nanoalloy particles decreased over time of the heat treatment under hydrogen. The rate of change depends on the original composition of the particles, as well as the heat treatment conditions such as temperature and flow rate. Our experimental results and theoretical calculations suggest that Zn in the intermetallic phase might be more stable, providing an opportunity for precise tuning the nanoparticle compositions. This approach presents a viable strategy for developing better Pt-Zn catalysts for propane dehydrogenation. △ Less

Submitted 19 July, 2024; originally announced July 2024.

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Ultralow thermal conductance across the [FePt/h-BN/FePt] interface

Authors: chengchao Xu, Enbo Zhang, Bo-Yuan Yang, B. S. D. Ch. S. Varaprasad, David E. Laughlin, Jian-Gang, Zhu

Abstract: Heat transfer in nanocomposite materials has attracted great interest for various applications. Multilayer structures provide an important platform to study interfacial thermal transport and to engineer materials with ultralow thermal conductivity. Here we report on the fabrication and thermal characterization of [h-BN/$L1_0$-FePt]xN multilayers, where hexagonal boron nitride (h-BN) nanosheets (2.… ▽ More Heat transfer in nanocomposite materials has attracted great interest for various applications. Multilayer structures provide an important platform to study interfacial thermal transport and to engineer materials with ultralow thermal conductivity. Here we report on the fabrication and thermal characterization of [h-BN/$L1_0$-FePt]xN multilayers, where hexagonal boron nitride (h-BN) nanosheets (2.5 nm thick) and $L1_0$-FePt layers (6.5 nm thick) alternate periodically. Differential three-omega($3ω$) measurements reveal an ultralow effective thermal conductivity of $ 0.60 \pm 0.05 W \cdot m^{-1}K^{-1}$ across the multilayer films, and a low thermal boundary conductance (TBC) of $ 67.9 \pm 6.6 MW \cdot m^{-2}K^{-1}$ for the [FePt/h-BN(2.5nm)/FePt] interface at room temperature. We attribute the ultralow thermal conductivity to the weak van der Waals bonding at h-BN/FePt interfaces, which dominates the thermal resistance of the multilayer structure. These findings provide insights into the thermal transport in 2D-material/metal multilayer nanostructures and suggest the [h-BN/FePt] superlattice as a promising material for nanoscale thermal barrier coating. Furthermore, the obtained TBC lays the foundation for analyzing heat transfer in FePt-(h-BN) nanogranular films, a promising magnetic recording media which can potentially provide high thermal gradient for heat-assisted magnetic recording (HAMR). This work advances the understanding of thermal transport in 2D-material/metal nanocomposites and demonstrates interface engineering as an effective approach to achieve materials with ultralow thermal conductivity. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 22 page, 5 figures

Enabling Large-Scale and High-Precision Fluid Simulations on Near-Term Quantum Computers

Authors: Zhao-Yun Chen, Teng-Yang Ma, Chuang-Chao Ye, Liang Xu, Ming-Yang Tan, Xi-Ning Zhuang, Xiao-Fan Xu, Yun-Jie Wang, Tai-Ping Sun, Yong Chen, Lei Du, Liang-Liang Guo, Hai-Feng Zhang, Hao-Ran Tao, Tian-Le Wang, Xiao-Yan Yang, Ze-An Zhao, Peng Wang, Sheng Zhang, Chi Zhang, Ren-Ze Zhao, Zhi-Long Jia, Wei-Cheng Kong, Meng-Han Dou, Jun-Chao Wang , et al. (7 additional authors not shown)

Abstract: Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement o… ▽ More Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement our method on a superconducting quantum computer, demonstrating successful simulations of steady Poiseuille flow and unsteady acoustic wave propagation. The Poiseuille flow simulation achieved a relative error of less than $0.2\%$, and the unsteady acoustic wave simulation solved a 5043-dimensional matrix. We emphasize the utilization of the quantum-classical hybrid approach in applications of near-term quantum computers. By adapting to quantum hardware constraints and offering scalable solutions for large-scale CFD problems, our method paves the way for practical applications of near-term quantum computers in computational science. △ Less

Submitted 19 June, 2024; v1 submitted 10 June, 2024; originally announced June 2024.

Comments: 31 pages, 10 figures

QCDGE database, Quantum Chemistry Database with Ground- and Excited-state Properties of 450 Kilo Molecules

Authors: Yifei Zhu, Mengge Li, Chao Xu, Zhenggang Lan

Abstract: Due to rapid advancements in deep learning techniques, the demand for large-volume high-quality databases grows significantly in chemical research. We developed a quantum-chemistry database that includes 443,106 small organic molecules with sizes up to 10 heavy atoms including carbon (C), nitrogen (N), oxygen (O), and fluorine (F). Ground-state geometry optimizations and frequency calculations of… ▽ More Due to rapid advancements in deep learning techniques, the demand for large-volume high-quality databases grows significantly in chemical research. We developed a quantum-chemistry database that includes 443,106 small organic molecules with sizes up to 10 heavy atoms including carbon (C), nitrogen (N), oxygen (O), and fluorine (F). Ground-state geometry optimizations and frequency calculations of all compounds were performed at the B3LYP/6-31G* level with the BJD3 dispersion correction, while the excited-state single-point calculations were conducted at the $ω$B97X-D/6-31G* level. Totally twenty seven molecular properties, such as geometric, thermodynamic, electronic and energetic properties, were gathered from these calculations. Meanwhile, we also established a comprehensive protocol for the construction of a high-volume quantum-chemistry database. Our QCDGE (Quantum Chemistry Database with Ground- and Excited-State Properties) database contains a substantial volume of data, exhibits high chemical diversity, and most importantly includes excited-state information. This database, along with its construction protocol, is expected to have a significant impact on the broad applications of machine learning studies across different fields of chemistry, especially in the area of excited-state research. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Prediction of Energy Resolution in the JUNO Experiment

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta, Antonio Bergnoli, Daniel Bick , et al. (629 additional authors not shown)

Abstract: This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components o… ▽ More This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components of the JUNO detector. Various factors affecting the detection of inverse beta decay signals have an impact on the energy resolution, extending beyond the statistical fluctuations of the detected number of photons, such as the properties of the liquid scintillator, performance of photomultiplier tubes, and the energy reconstruction algorithm. To account for these effects, a full JUNO simulation and reconstruction approach is employed. This enables the modeling of all relevant effects and the evaluation of associated inputs to accurately estimate the energy resolution. The results of study reveal an energy resolution of 2.95\% at 1~MeV. Furthermore, this study assesses the contribution of major effects to the overall energy resolution budget. This analysis serves as a reference for interpreting future measurements of energy resolution during JUNO data collection. Moreover, it provides a guideline for comprehending the energy resolution characteristics of liquid scintillator-based detectors. △ Less

Submitted 9 January, 2025; v1 submitted 28 May, 2024; originally announced May 2024.

Journal ref: Chinese Phys. C 49 013003 (2025)

Onset of global instability in a premixed annular V-flame

Authors: Chuhan Wang, Christopher M. Douglas, Yu Guan, Chunxiao Xu, Lutz Lesshafft

Abstract: We investigate self-excited axisymmetric oscillations of a lean premixed methane--air V-flame in a laminar annular jet. The flame is anchored near the rim of the centrebody, forming an inverted cone, while the strongest vorticity is concentrated along the outer shear layer of the annular jet. Consequently, the reaction and vorticity dynamics are largely separated, except where they coalesce near t… ▽ More We investigate self-excited axisymmetric oscillations of a lean premixed methane--air V-flame in a laminar annular jet. The flame is anchored near the rim of the centrebody, forming an inverted cone, while the strongest vorticity is concentrated along the outer shear layer of the annular jet. Consequently, the reaction and vorticity dynamics are largely separated, except where they coalesce near the flame tip. The global eigenmodes corresponding to the linearised reacting flow equations around the steady base state are computed in an axisymmetric setting. We identify an arc branch of eigenmodes exhibiting strong oscillations at the flame tip. The associated eigenvalues are robust with respect to domain truncation and numerical discretisation, and they become destabilised as the Reynolds number increases. The frequency of the leading eigenmode is found to correspond to the Lagrangian disturbance advection time from the nozzle outlet to the flame tip. Nonlinear time-resolved simulation further reveals notable hysteresis phenomena in the subcritical regime prior to instability. Hence, even when the flame is linearly stable, perturbations of sufficient amplitude can trigger limit-cycle oscillations and higher-dimensional dynamics sustained by nonlinear feedback. A Monte Carlo simulation of passive tracers in the unsteady flame suggests a nonlinear non-local instability mechanism. Notably, linear analysis of the subcritical time-averaged limit-cycle state yields eigenvalues that do not match the nonlinear periodic oscillation frequencies, attributed to the fundamentally nonlinear dynamics of the subcritical V-flame instability, where the dichromatic, non-local interaction cannot be approximated as a simple distortion of the mean flow. △ Less

Submitted 6 September, 2024; v1 submitted 26 April, 2024; originally announced April 2024.

Journal ref: J. Fluid Mech. 998 (2024) A23

Comparison of h-BN and graphene layers as grain boundary materials for granular FePt-$\text{L}1_0$ thin films

Authors: B. S. D. Ch. S. Varaprasad, Chengchao Xu, Brandon Reese, David E. Laughlin, Jian-Gang, Zhu

Abstract: Granular $\text{L}1_0$-FePt thin films with small columnar grains are essential for heat-assisted magnetic recording media. While hexagonal boron nitride(h-BN) has proven effective for promoting columnar FePt grains, we explored multilayer graphene as an alternative grain boundary material leveraging its structural similarity to h-BN. The FePt granular thin films with carbon-based grain boundary m… ▽ More Granular $\text{L}1_0$-FePt thin films with small columnar grains are essential for heat-assisted magnetic recording media. While hexagonal boron nitride(h-BN) has proven effective for promoting columnar FePt grains, we explored multilayer graphene as an alternative grain boundary material leveraging its structural similarity to h-BN. The FePt granular thin films with carbon-based grain boundary materials(GBMs) were deposited by cosputtering on Si/SiO2 substrates with substrate bias at 650°C. The RF bias and high temperature facilitated formation of interlinked graphene nanoribbons wrapping around FePt grains, yielding 7.5 nm diameter, 8 nm height grains with an order parameter of 0.78 and a perpendicular coercivity of 40 kOe. However, the formation of graphene nanoribbons could not effectively promote columnar structures, likely due to co-existing amorphous carbon in grain boundaries. Optimizing deposition to improve graphene grain boundary quality is necessary to realize this 2D material's potential for achieving desirable microstructures for HAMR media. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Comments: 13 pages, 5 figures, first presented in MMM 2023 conference at Dallas

Prolate spheroids settling in a quiescent fluid: clustering, microstructures and collisions

Authors: Xinyu Jiang, Chunxiao Xu, Lihao Zhao

Abstract: In this study, we investigate the sedimentation of prolate spheroids in a quiescent fluid by means of the particle-resolved direct numerical simulation. With the increase of the particle volume fraction $φ$ from $0.1\%$ to $10\%$, we observe a non-monotonic variation of the mean settling velocity of particles, $\langle V_s \rangle$. By virtue of the Voronoi analysis, we find that the degree of par… ▽ More In this study, we investigate the sedimentation of prolate spheroids in a quiescent fluid by means of the particle-resolved direct numerical simulation. With the increase of the particle volume fraction $φ$ from $0.1\%$ to $10\%$, we observe a non-monotonic variation of the mean settling velocity of particles, $\langle V_s \rangle$. By virtue of the Voronoi analysis, we find that the degree of particle clustering is highest when $\langle V_s \rangle$ reaches the local maximum at $φ=1\%$. Under the swarm effect, clustered particles are found to preferentially sample downward fluid flows in the wake regions, leading to the enhancement of the settling speed. As for lower or higher volume fraction, the tendency of particle clustering and the preferential sampling of downward flows are attenuated. Hindrance effect becomes predominant when the volume fraction exceeds 5\% and reduces $\langle V_s \rangle$ to less than the isolated settling velocity. Particle orientation plays a minor role in the mean settling velocity, although individual prolate particles still tend to settle faster in suspensions when they deviate more from the broad-side-on alignment. Moreover, we also demonstrate that particles are prone to form column-like microstructures in dilute suspensions under the effect of wake-induced hydrodynamic attractions. The radial distribution function is higher at a lower volume fraction. As a result, the collision rate scaled by the particle number density decreases with the increasing volume fraction. By contrast, as another contribution to the particle collision rate, the relative radial velocity for nearby particles shows a minor degree of variation due to the lubrication effect. △ Less

Submitted 8 November, 2024; v1 submitted 17 April, 2024; originally announced April 2024.

Journal ref: J. Fluid Mech. 1000 (2024) A49

A newly developed multi-kilo-channel high-speed and precision waveform digitization system for neutrino experiments

Authors: H. Yang, T. Xue, L. Jiang, C. Xu, Q. Pan, B. Liang, G. Gong, B. Xu, Z. Wang, S. Chen, Y. Liu, J. Li

Abstract: The Jinping Neutrino Experiment(JNE), conducted within the China Jinping Underground Laboratory, aims to detect and analyze of solar neutrinos, geo-neutrinos, and supernova neutrinos. A one-ton prototype will soon be in commision with an upgrade from 30 channels to 60 channels, which will increase the data bandwidth by one to two orders of magnitude and exceed the capacity of the current CAEN DAQ… ▽ More The Jinping Neutrino Experiment(JNE), conducted within the China Jinping Underground Laboratory, aims to detect and analyze of solar neutrinos, geo-neutrinos, and supernova neutrinos. A one-ton prototype will soon be in commision with an upgrade from 30 channels to 60 channels, which will increase the data bandwidth by one to two orders of magnitude and exceed the capacity of the current CAEN DAQ system. Additionally, enhancing the performance and flexibility of JNE DAQ system is crucial. This paper presents the design of a new Tsinghua DAQ system for the JNE and its performance and stability. The new Tsinghua DAQ(THDAQ) system for JNE is based on the cPCI protocol and demonstrates powerful performance improvements: ADC ENOB of the THDAQ system approximately exceeds 9.8-bit, marking a 14% improvement over the CAEN DAQ system; The maximum clock deviation within a single chassis is 85.6 ps, satisfying sub-nanosecond synchronization criteria; Each DAQ board features two QSFP+ optical ports with 82.5Gbps transmission capability, while the PCIe board supports a transmission rate of 100.2 Gbps. In addition, comparative experiments between the two systems were also tested in detail. The analysis results of waveform and charge spectrum prove the high stability of the THDAQ system. This provides a foundation for the 60-channel and 4000-channel DAQ systems. △ Less

Submitted 16 April, 2024; originally announced April 2024.

PiRD: Physics-informed Residual Diffusion for Flow Field Reconstruction

Authors: Siming Shan, Pengkai Wang, Song Chen, Jiaxu Liu, Chao Xu, Shengze Cai

Abstract: The use of machine learning in fluid dynamics is becoming more common to expedite the computation when solving forward and inverse problems of partial differential equations. Yet, a notable challenge with existing convolutional neural network (CNN)-based methods for data fidelity enhancement is their reliance on specific low-fidelity data patterns and distributions during the training phase. In ad… ▽ More The use of machine learning in fluid dynamics is becoming more common to expedite the computation when solving forward and inverse problems of partial differential equations. Yet, a notable challenge with existing convolutional neural network (CNN)-based methods for data fidelity enhancement is their reliance on specific low-fidelity data patterns and distributions during the training phase. In addition, the CNN-based method essentially treats the flow reconstruction task as a computer vision task that prioritizes the element-wise precision which lacks a physical and mathematical explanation. This dependence can dramatically affect the models' effectiveness in real-world scenarios, especially when the low-fidelity input deviates from the training data or contains noise not accounted for during training. The introduction of diffusion models in this context shows promise for improving performance and generalizability. Unlike direct mapping from a specific low-fidelity to a high-fidelity distribution, diffusion models learn to transition from any low-fidelity distribution towards a high-fidelity one. Our proposed model - Physics-informed Residual Diffusion, demonstrates the capability to elevate the quality of data from both standard low-fidelity inputs, to low-fidelity inputs with injected Gaussian noise, and randomly collected samples. By integrating physics-based insights into the objective function, it further refines the accuracy and the fidelity of the inferred high-quality data. Experimental results have shown that our approach can effectively reconstruct high-quality outcomes for two-dimensional turbulent flows from a range of low-fidelity input conditions without requiring retraining. △ Less

Submitted 9 May, 2024; v1 submitted 12 April, 2024; originally announced April 2024.

Comments: 22 pages

Reconstructing the evolution history of networked complex systems

Authors: Junya Wang, Yi-Jiao Zhang, Cong Xu, Jiaze Li, Jiachen Sun, Jiarong Xie, Ling Feng, Tianshou Zhou, Yanqing Hu

Abstract: The evolution processes of complex systems carry key information in the systems' functional properties. Applying machine learning algorithms, we demonstrate that the historical formation process of various networked complex systems can be extracted, including protein-protein interaction, ecology, and social network systems. The recovered evolution process has demonstrations of immense scientific v… ▽ More The evolution processes of complex systems carry key information in the systems' functional properties. Applying machine learning algorithms, we demonstrate that the historical formation process of various networked complex systems can be extracted, including protein-protein interaction, ecology, and social network systems. The recovered evolution process has demonstrations of immense scientific values, such as interpreting the evolution of protein-protein interaction network, facilitating structure prediction, and particularly revealing the key co-evolution features of network structures such as preferential attachment, community structure, local clustering, degree-degree correlation that could not be explained collectively by previous theories. Intriguingly, we discover that for large networks, if the performance of the machine learning model is slightly better than a random guess on the pairwise order of links, reliable restoration of the overall network formation process can be achieved. This suggests that evolution history restoration is generally highly feasible on empirical networks. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Holistic numerical simulation of a quenching process on a real-size multifilamentary superconducting coil

Authors: Cun Xue, Han-Xi Ren, Peng Jia, Qing-Yu Wang, Wei Liu, Xian-Jin Ou, Liang-Ting Sun, Alejandro V Silhanek

Abstract: Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can result in catastrophic flux jumps eventually leading to irreversible damage. This issue has long plagued high-$J_c$ Nb$_3$Sn wires at the core of high-field magne… ▽ More Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can result in catastrophic flux jumps eventually leading to irreversible damage. This issue has long plagued high-$J_c$ Nb$_3$Sn wires at the core of high-field magnets. In this study, we introduce a groundbreaking large-scale GPU-optimized algorithm aimed at tackling the complex intertwined effects of electromagnetism, heating, and strain acting concomitantly during the quenching process of superconducting coils. We validate our model by conducting comparisons with magnetization measurements obtained from short multifilamentary Nb$_3$Sn wires and further experimental tests conducted on solenoid coils while subject to ramping transport currents. Furthermore, leveraging our developed numerical algorithm, we unveil the dynamic propagation mechanisms underlying thermomagnetic instabilities (including flux jumps and quenches) within the coils. Remarkably, our findings reveal that the velocity field of flux jumps and quenches within the coil is correlated with the amount of Joule heating experienced by each wire over a specific time interval, rather than solely being dependent on instantaneous Joule heating or maximum temperature. These insights have the potential to pave the way for optimizing the design of next-generation superconducting magnets, thereby directly influencing a wide array of technologically relevant and multidisciplinary applications. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Suppression of flux jumps in high-$J_c$ Nb$_3$Sn conductors by ferromagnetic layer

Authors: Cun Xue, Kai-Wei Cao, Tian He, Chong Wei, Wei Liu, Jun-Yi Ge

Abstract: Flux jumps observed in high-$J_c$ Nb$_3$Sn conductors are urgent problems to construct high field superconducting magnets. The low-field instabilities usually reduce the current-carrying capability and thus cause the premature quench of Nb$_3$Sn coils at low magnetic field. In this paper, we explore suppressing the flux jumps by ferromagnetic (FM) layer. Firstly, we experimentally and theoreticall… ▽ More Flux jumps observed in high-$J_c$ Nb$_3$Sn conductors are urgent problems to construct high field superconducting magnets. The low-field instabilities usually reduce the current-carrying capability and thus cause the premature quench of Nb$_3$Sn coils at low magnetic field. In this paper, we explore suppressing the flux jumps by ferromagnetic (FM) layer. Firstly, we experimentally and theoretically investigate the flux jumps of Nb$_3$Sn/FM hybrid wires exposed to a magnetic field loop with constant sweeping rate. Comparing with bare Nb$_3$Sn and Nb$_3$Sn/Cu wires, we reveal two underlying mechanisms that the suppression of flux jumps is mainly attributed to the thermal effect of FM layer for the case of lower sweeping rate, whereas both thermal and electromagnetic effects play a crucial role for the case of higher sweeping rate. Furthermore, we explore the flux jumps of Nb$_3$Sn/FM hybrid wires exposed to AC magnetic fields with amplitude $B_{a0}$ and frequency $\rmω$. We build up the phase diagrams of flux jumps in the plane $\rmω$-$B_{a0}$ for bare Nb$_{3}$Sn wire, Nb$_{3}$Sn/Cu wire and Nb$_{3}$Sn/FM wire, respectively. We stress that the region of flux jumps of Nb$_{3}$Sn/FM wire is much smaller than the other two wires, which indicates that the Nb$_{3}$Sn/FM wire has significant advantage over merely increasing the heat capacity. The findings shed light on suppression of the flux jumps by utilizing FM materials, which is useful for developing new type of high-$J_c$ Nb$_{3}$Sn conductors. △ Less

Submitted 4 June, 2024; v1 submitted 10 March, 2024; originally announced March 2024.

A Spectral Element Enrichment Wall-Model

Authors: Steven R. Brill, Pinaki Pal, Muhsin Ameen, Chao Xu, Matthias Ihme

Abstract: We develop an enrichment wall-model within the spectral element method (SEM) framework for large-eddy simulations of wall-bounded flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in… ▽ More We develop an enrichment wall-model within the spectral element method (SEM) framework for large-eddy simulations of wall-bounded flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in the boundary layer, which allows the polynomial modes to represent the turbulent fluctuations. The enriched solution is able to resolve the shear stress at the wall without any modification to the no-slip wall boundary conditions. The performance of the SEM enrichment wall-modeling approach is assessed in turbulent channel flow LES for a range of Reynolds numbers. The results show that the proposed method improves solution accuracy on under-resolved near-wall grids as compared to the traditional shear stress wall-models. △ Less

Submitted 20 November, 2024; v1 submitted 8 March, 2024; originally announced March 2024.

Case studies on time-dependent Ginzburg-Landau simulations for superconducting applications

Authors: Cun Xue, Qing-Yu Wang, Han-Xi Ren, An He, A. V. Silhanek

Abstract: The macroscopic electromagnetic properties of type II superconductors are primarily influenced by the behavior of microscopic superconducting flux quantum units. Time-dependent Ginzburg-Landau (TDGL) equations provide an elegant and powerful tool for describing and examining both the statics and dynamics of these superconducting entities. They have been instrumental in replicating and elucidating… ▽ More The macroscopic electromagnetic properties of type II superconductors are primarily influenced by the behavior of microscopic superconducting flux quantum units. Time-dependent Ginzburg-Landau (TDGL) equations provide an elegant and powerful tool for describing and examining both the statics and dynamics of these superconducting entities. They have been instrumental in replicating and elucidating numerous experimental results over the past decades.This paper provides a comprehensive overview of the progress in TDGL simulations, focusing on three key aspects of superconductor applications. The initial section delves into vortex rectification in superconductors described within the TDGL framework. We specifically highlight the superconducting diode effect achieved through asymmetric pinning landscapes and the reversible manipulation of vortex ratchets with dynamic pinning landscapes. The subsequent section reviews the achievements of TDGL simulations concerning the critical current density of superconductors, emphasizing the optimization of pinning sites, particularly vortex pinning and dynamics in polycrystalline Nb$_3$Sn with grain boundaries. The third part concentrates on numerical modeling of vortex penetration and dynamics in superconducting radio frequency (SRF) cavities, including a discussion of superconductor insulator superconductor multilayer structures. In the last section, we present key findings, insights, and perspectives derived from the discussed simulations. △ Less

Submitted 4 June, 2024; v1 submitted 6 March, 2024; originally announced March 2024.

Comments: 20 pages,13 figures

Leveraging Prior Mean Models for Faster Bayesian Optimization of Particle Accelerators

Authors: Tobias Boltz, Jose L. Martinez, Connie Xu, Kathryn R. L. Baker, Zihan Zhu, Jenny Morgan, Ryan Roussel, Daniel Ratner, Brahim Mustapha, Auralee L. Edelen

Abstract: Tuning particle accelerators is a challenging and time-consuming task that can be automated and carried out efficiently using suitable optimization algorithms, such as model-based Bayesian optimization techniques. One of the major advantages of Bayesian algorithms is the ability to incorporate prior information about beam physics and historical behavior into the model used to make control decision… ▽ More Tuning particle accelerators is a challenging and time-consuming task that can be automated and carried out efficiently using suitable optimization algorithms, such as model-based Bayesian optimization techniques. One of the major advantages of Bayesian algorithms is the ability to incorporate prior information about beam physics and historical behavior into the model used to make control decisions. In this work, we examine incorporating prior accelerator physics information into Bayesian optimization algorithms by utilizing fast executing, neural network models trained on simulated or historical datasets as prior mean functions in Gaussian process models. We show that in ideal cases, this technique substantially increases convergence speed to optimal solutions in high-dimensional tuning parameter spaces. Additionally, we demonstrate that even in non-ideal cases, where prior models of beam dynamics do not exactly match experimental conditions, the use of this technique can still enhance convergence speed. Finally, we demonstrate how these methods can be used to improve optimization in practical applications, such as transferring information gained from beam dynamics simulations to online control of the LCLS injector, and transferring knowledge gained from experimental measurements across different operating modes, such as accelerating different ion species at the ATLAS heavy ion accelerator. △ Less

Submitted 17 February, 2025; v1 submitted 28 February, 2024; originally announced March 2024.

Stacking faults enabled second harmonic generation in centrosymmetric van der Waals RhI3

Authors: Yue Liu, Wen He, Bingze Wu, Fengyuan Xuan, Yuqiang Fang, Zhengbo Zhong, Jierui Fu, Jiapeng Wang, Zhipeng Li, Jinzhong Wang, Mingguang Yao, Fuqiang Huang, Liang Zhen, Yang Li, Chengyan Xu

Abstract: Second harmonic generation (SHG) in van der Waals (vdWs) materials has garnered significant attention due to its potential for integrated nonlinear optical and optoelectronic applications. Stacking faults in vdWs materials, a typical kind of planar defect, can introduce a new degree of freedom to modulate the crystal symmetry and resultant SHG response, however, the physical origin and tunability… ▽ More Second harmonic generation (SHG) in van der Waals (vdWs) materials has garnered significant attention due to its potential for integrated nonlinear optical and optoelectronic applications. Stacking faults in vdWs materials, a typical kind of planar defect, can introduce a new degree of freedom to modulate the crystal symmetry and resultant SHG response, however, the physical origin and tunability of stacking-fault-governed SHG in vdWs materials remain unclear. Here, taking the intrinsically centrosymmetric vdWs RhI3 as an example, we theoretically reveal the origin of stacking-fault-governed SHG response, where the SHG response comes from the energetically favorable AC- Cstacking fault of which the electrical transitions along the high symmetry paths Gamma-M and Gamma-K in the Brillion zone play the dominant role at 810 nm. Such stacking-fault-governed SHG response is further confirmed via structural characterizations and SHG measurements. Furthermore, by applying hydrostatic pressure on RhI3, the correlation between structural evolution and SHG response is revealed with SHG enhancement up to 6.9 times, where the decreased electronic transition energies and huger momentum matrix elements due to the stronger interlayer interactions upon compression magnify the SHG susceptibility. This study develops a promising foundation based on strategically designed stacking faults for pioneering new avenues in nonlinear nano-optics. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Spectral Switches of Light in Curved Space

Authors: Suting Ju, Chenni Xu, Li-Gang Wang

Abstract: Acting as analog models of curved spacetime, surfaces of revolution employed for exploring novel optical effects are followed with great interest nowadays to enhance our comprehension of the universe. It is of general interest to understand the spectral effect of light propagating through a long distance in the universe. Here, we address the issue on how curved space affects the phenomenon of spec… ▽ More Acting as analog models of curved spacetime, surfaces of revolution employed for exploring novel optical effects are followed with great interest nowadays to enhance our comprehension of the universe. It is of general interest to understand the spectral effect of light propagating through a long distance in the universe. Here, we address the issue on how curved space affects the phenomenon of spectral switches, a spectral sudden change during propagation caused by a finite size of a light source. By using the point spread function of curved space under the paraxial approximation, the expression of the on-axis output spectrum is derived and calculated numerically. A theoretical way to find on-axis spectral switches is also derived, which interprets the effect of spatial curvature of surfaces on spectral switches as a modification of effective Fresnel number. We find that the spectral switches on surfaces with positive Gaussian curvature are closer to the source, compared with the flat surface case, while the effect is opposite on surfaces with negative Gaussian curvature. We also find that the spectral switches farther away from the light source are more sensitive to the change in Gaussian curvature. This work deepens our understanding of the properties of fully and partially coherent lights propagating on two-dimensional curved space. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Comments: 9 pages,5 figures