Showing 1–50 of 114 results for author: Xu, P

Characterization of NbTi wires for the electron-ion collider project

Authors: Jun Lu, Jeremy Levitan Noah Gavin, Aniket Ingrole, Holger Witte, Peng Xu, Ye Bai

Abstract: The Electron-Ion Collider (EIC) is a proposed machine to explore the behaviour of the fundamental particles and forces that bind atomic nuclei together. The design and construction of the EIC are underway at Brookhaven National Laboratory in collaboration with Thomas Jefferson National Accelerator Facility. EIC will use several different types of superconducting strands for magnets near the intera… ▽ More The Electron-Ion Collider (EIC) is a proposed machine to explore the behaviour of the fundamental particles and forces that bind atomic nuclei together. The design and construction of the EIC are underway at Brookhaven National Laboratory in collaboration with Thomas Jefferson National Accelerator Facility. EIC will use several different types of superconducting strands for magnets near the interaction region (IR). At beam injection, the magnetic field is usually very low compared with its maximum operating field. This usually creates considerable field errors mainly generated from magnetization current in superconducting strands even using very fine filament. The accurate magnetization measurement results from those superconducting strands will be critical for the calculation and future correction of magnetic field for EIC. In this work, we characterized three billets of superconductor NbTi strands. The magnetization was measured at 4.2 K and 1.9 K in magnetic fields below 1.5 T. The critical current at 4.2 K and in magnetic field down to 5 T were also measured. Other properties that are important for the safety margin of superconducting magnet fabrication, operation, and quench protection such as residual-resistance-ratio (RRR), filament diameter, Cu to non-Cu ratio, twist pitch, and mechanical properties at 77 K will also be presented. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Comments: 8 pages, 6 figures, CEC/ICMC conference, Reno, NV, May 2025

Vertical Profile Corrected Satellite NH3 Retrievals Enable Accurate Agricultural Emission Characterization in China

Authors: Qiming Liu, Yilin Chen, Peng Xu, Huizhong Shen, Zelin Mai, Ruixin Zhang, Peng Guo, Zhiyu Zheng, Tiancheng Luan, Shu Tao

Abstract: Ammonia (NH3) emissions significantly contribute to atmospheric pollution, yet discrepancies exist between bottom-up inventories and satellite-constrained top-down estimates, with the latter typically one-third higher. This study quantifies how assumptions about NH3 vertical distribution in satellite retrievals contribute to this gap. By implementing spatially and temporally resolved vertical prof… ▽ More Ammonia (NH3) emissions significantly contribute to atmospheric pollution, yet discrepancies exist between bottom-up inventories and satellite-constrained top-down estimates, with the latter typically one-third higher. This study quantifies how assumptions about NH3 vertical distribution in satellite retrievals contribute to this gap. By implementing spatially and temporally resolved vertical profiles from the Community Multiscale Air Quality model to replace steep gradients in Infrared Atmospheric Sounding Interferometer (IASI) retrievals, we reduced satellite-model column discrepancies from 71% to 18%. We subsequently constrained NH3 emissions across China using a hybrid inversion framework combining iterative mass balance and four-dimensional variational methods. Our posterior emissions showed agreement with the a priori inventory (7.9% lower), suggesting that discrepancies between inventory approaches were amplified by overestimation of near-surface NH3 in baseline satellite retrievals, potentially causing a 43% overestimation of growing season emissions. Evaluation against ground-based measurements confirmed improved model performance, with normalized root-mean-square error reductions of 1-27% across six months. These findings demonstrate that accurate representation of vertical profiles in satellite retrievals is critical for robust NH3 emission estimates and can reconcile the long-standing discrepancy between bottom-up and top-down approaches. Our hybrid inversion methodology, leveraging profile-corrected satellite data, reveals that China's NH3 emissions exhibit greater spatial concentration than previously recognized, reflecting agricultural intensification. This advancement enables timely and accurate characterization of rapidly changing agricultural emission patterns, critical for implementing effective nitrogen pollution control measures. △ Less

Submitted 26 May, 2025; originally announced May 2025.

Comments: 44 pages, 14 figures, 1 table. The main text spans pages 1-28 and includes 5 figures. The supplementary information (SI) spans pages 29-44, containing 9 figures and 1 table

Voltage and power-frequency electric field measurements with Rydberg-atom interferometry

Authors: Yingying Han, Changfa He, Zhenxiong Weng, Peng Xu, Yanting Zhao, Tao Wang

Abstract: We present a Rydberg-atom interferometry-based technique for voltage measurement between electrodes embedded in an atomic vapor cell, enabling the detection of weak voltages ($<0.1$V) and unambiguous discrimination between positive and negative polarities. This makes up for the shortcomings of measurements based on the Stark effect, which suffer from quadratic field dependence (limiting sensitivit… ▽ More We present a Rydberg-atom interferometry-based technique for voltage measurement between electrodes embedded in an atomic vapor cell, enabling the detection of weak voltages ($<0.1$V) and unambiguous discrimination between positive and negative polarities. This makes up for the shortcomings of measurements based on the Stark effect, which suffer from quadratic field dependence (limiting sensitivity in weak-field regimes) and incapable of distinguishing the electric field direction. Furthermore, this method extends naturally to power-frequency (PF) electric field measurements by exploiting the quasi-static approximation-valid given the PF field's characteristic timescale ($\sim10^{-2}$s) vastly exceeds the interferometric measurement duration ($\sim10^{-6}$s). Crucially, our protocol provides instantaneous PF field reconstruction, providing comprehensive information including amplitude, frequency and phase. These advancements have direct implications for traceable voltage measurements and non-invasive characterization of PF fields near high-voltage infrastructure. △ Less

Submitted 13 April, 2025; originally announced April 2025.

Comments: 5 pages, 4 figures

Spontaneous Chern-Euler Duality Transitions

Authors: Kang Yang, Zhi Li, Peng Xue, Emil J. Bergholtz, Piet W. Brouwer

Abstract: Topological phase transitions are typically characterized by abrupt changes in a quantized invariant. Here we report a contrasting paradigm in non-Hermitian parity-time symmetric systems, where the topological invariant remains conserved, but its nature transitions between the Chern number, characteristic of chiral transport in complex bands, and the Euler number, which characterizes the number of… ▽ More Topological phase transitions are typically characterized by abrupt changes in a quantized invariant. Here we report a contrasting paradigm in non-Hermitian parity-time symmetric systems, where the topological invariant remains conserved, but its nature transitions between the Chern number, characteristic of chiral transport in complex bands, and the Euler number, which characterizes the number of nodal points in pairs of real bands. The transition features qualitative changes in the non-Abelian geometric phases during spontaneous parity-time symmetry breaking, where different quantized components become mutually convertible. Our findings establish a novel topological duality principle governing transitions across symmetry classes and reveal unique non-unitary features intertwining topology, symmetry, and non-Abelian gauge structure. △ Less

Submitted 27 March, 2025; originally announced March 2025.

Comments: 5+12 pages, 3 figures

Revealing Nanostructures in High-Entropy Alloys via Machine-Learning Accelerated Scalable Monte Carlo Simulation

Authors: Xianglin Liu, Kai Yang, Yongxiang Liu, Fanli Zhou, Dengdong Fan, Zongrui Pei, Pengxiang Xu, Yonghong Tian

Abstract: The computational cost of traditional first-principles method quickly becomes prohibitively expensive as the number of atoms increases. This challenge is further amplified by the need to evaluate finite-temperature properties with Monte Carlo (MC) simulations, which is inherently challenging to parallelize due to sequential Markov chain updates. Here, we introduce Scalable Monte Carlo (SMC), an ef… ▽ More The computational cost of traditional first-principles method quickly becomes prohibitively expensive as the number of atoms increases. This challenge is further amplified by the need to evaluate finite-temperature properties with Monte Carlo (MC) simulations, which is inherently challenging to parallelize due to sequential Markov chain updates. Here, we introduce Scalable Monte Carlo (SMC), an efficient MC simulation method that overcomes the parallelization bottlenecks in conventional MC simulation, reducing the computational complexity of a MC sweep from quadratic to linear. We present a GPU implementation of the SMC method, SMC-GPU, which simultaneously harnesses the thousands of processing cores on a GPU to accelerate the computation. By adopting a data-driven workflow that surrogates the computationally expensive density functional theory (DFT) with ML models, we demonstrate that SMC-GPU is capable of simulating systems of more than one-billion atoms, while maintaining the accuracy of first-principles methods. Using this unprecedented capability, we performed billion-atom MC simulations to investigate the nanostructure evolution of two important high-entropy alloys (HEAs), FeCoNiAlTi and MoNbTaW, in which the nanostructures are believed to be responsible for their superb mechanical properties. Our results reveal a rich diversity of nanostructures, including nanoparticles (NP), 3D-connected NP, and disorder protected nanophases. We quantitatively analyze the size, composition, and morphology of the nanostructures, as well as directly simulate the atom-probe-tomography (APT) needle. The results align well with available experimental observations. This work underscores the promising potential of leveraging large-scale MC simulation to explore the largely uncharted territory of nanostructure evolution in HEAs. △ Less

Submitted 27 March, 2025; v1 submitted 16 March, 2025; originally announced March 2025.

Enhanced Atom-by-Atom Assembly of Defect-Free Two-Dimensional Mixed-Species Atomic Arrays

Authors: Ming-Rui Wei, Kun-Peng Wang, Jia-Yi Hou, Yi Chen, Peng Xu, Jun Zhuang, Rui-Jun Guo, Min Liu, Jin Wang, Xiao-Dong He, Ming-Sheng Zhan

Abstract: Defect-free single atom array in optical tweezers is a promising platform for scalable quantum computing, quantum simulation, and quantum metrology. Extending single-species array to mixed-species one promise to offer new possibilities. In our recent proof of principle realization of defect-free two-dimensional assembly of mixed-species $^{85}$Rb ($^{87}$Rb) atom arrays [C. Sheng et al.\href{https… ▽ More Defect-free single atom array in optical tweezers is a promising platform for scalable quantum computing, quantum simulation, and quantum metrology. Extending single-species array to mixed-species one promise to offer new possibilities. In our recent proof of principle realization of defect-free two-dimensional assembly of mixed-species $^{85}$Rb ($^{87}$Rb) atom arrays [C. Sheng et al.\href{https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.128.083202}{{\color{blue} Phys. Rev. Lett. 128, 083202(2022)}}], the filling fractions were limited by the imperfect transfer of atoms and the occurrence of logjams during the atom rearrangement. In order to scale up the size of defect-free mixed-species atom array, we scale up the tweezer array and improve the atom transfer, and upgrade the heuristic heteronuclear algorithm so as to facilitate multiple rearrangement cycles. Consequently, we successfully create defect-free atom arrays with 120 mixed-species single atoms. The corresponding filling fraction and defect-free probability are improved to be 98.6(1)\% and 14(2)\%, respectively. It is anticipated that the enhanced algorithm can be extended to other combinations of atomic species, and this mixed-species atom array is readily for studies of many-body physics, quantum error correction, and quantum metrology. △ Less

Submitted 9 January, 2025; v1 submitted 4 January, 2025; originally announced January 2025.

Comments: 8 pages, 5 figures

Accelerating Stochastic Gravitational Wave Backgrounds Parameter Estimation in Pulsar Timing Arrays with Flow Matching

Authors: Bo Liang, Chang Liu, Tianyu Zhao, Minghui Du, Manjia Liang, Ruijun Shi, Hong Guo, Yuxiang Xu, Li-e Qiang, Peng Xu, Wei-Liang Qian, Ziren Luo

Abstract: Pulsar timing arrays (PTAs) are essential tools for detecting the stochastic gravitational wave background (SGWB), but their analysis faces significant computational challenges. Traditional methods like Markov-chain Monte Carlo (MCMC) struggle with high-dimensional parameter spaces where noise parameters often dominate, while existing deep learning approaches fail to model the Hellings-Downs (HD)… ▽ More Pulsar timing arrays (PTAs) are essential tools for detecting the stochastic gravitational wave background (SGWB), but their analysis faces significant computational challenges. Traditional methods like Markov-chain Monte Carlo (MCMC) struggle with high-dimensional parameter spaces where noise parameters often dominate, while existing deep learning approaches fail to model the Hellings-Downs (HD) correlation or are validated only on synthetic datasets. We propose a flow-matching-based continuous normalizing flow (CNF) for efficient and accurate PTA parameter estimation. By focusing on the 10 most contributive pulsars from the NANOGrav 15-year dataset, our method achieves posteriors consistent with MCMC, with a Jensen-Shannon divergence below \(10^{-2}\) nat, while reducing sampling time from 50 hours to 4 minutes. Powered by a versatile embedding network and a reweighting loss function, our approach prioritizes the SGWB parameters and scales effectively for future datasets. It enables precise reconstruction of SGWB and opens new avenues for exploring vast observational data and uncovering potential new physics, offering a transformative tool for advancing gravitational wave astronomy. △ Less

Submitted 26 December, 2024; originally announced December 2024.

Exploring applications of topological data analysis in stock index movement prediction

Authors: Dazhi Huang, Pengcheng Xu, Xiaocheng Huang, Jiayi Chen

Abstract: Topological Data Analysis (TDA) has recently gained significant attention in the field of financial prediction. However, the choice of point cloud construction methods, topological feature representations, and classification models has a substantial impact on prediction results. This paper addresses the classification problem of stock index movement. First, we construct point clouds for stock indi… ▽ More Topological Data Analysis (TDA) has recently gained significant attention in the field of financial prediction. However, the choice of point cloud construction methods, topological feature representations, and classification models has a substantial impact on prediction results. This paper addresses the classification problem of stock index movement. First, we construct point clouds for stock indices using three different methods. Next, we apply TDA to extract topological structures from the point clouds. Four distinct topological features are computed to represent the patterns in the data, and 15 combinations of these features are enumerated and input into six different machine learning models. We evaluate the predictive performance of various TDA configurations by conducting index movement classification tasks on datasets such as CSI, DAX, HSI and FTSE providing insights into the efficiency of different TDA setups. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Comments: 20 pages, 10 figures

First-in-human spinal cord tumor imaging with fast adaptive focus tracking robotic-OCT

Authors: Bin He, Yuzhe Ying, Yejiong Shi, Zhe Meng, Zichen Yin, Zhengyu Chen, Zhangwei Hu, Ruizhi Xue, Linkai Jing, Yang Lu, Zhenxing Sun, Weitao Man, Youtu Wu, Dan Lei, Ning Zhang, Guihuai Wang, Ping Xue

Abstract: Current surgical procedures for spinal cord tumors lack in vivo high-resolution, high-speed multifunctional imaging systems, posing challenges for precise tumor resection and intraoperative decision-making. This study introduces the Fast Adaptive Focus Tracking Robotic Optical Coherence Tomography (FACT-ROCT) system,designed to overcome these obstacles by providing real-time, artifact-free multifu… ▽ More Current surgical procedures for spinal cord tumors lack in vivo high-resolution, high-speed multifunctional imaging systems, posing challenges for precise tumor resection and intraoperative decision-making. This study introduces the Fast Adaptive Focus Tracking Robotic Optical Coherence Tomography (FACT-ROCT) system,designed to overcome these obstacles by providing real-time, artifact-free multifunctional imaging of spinal cord tumors during surgery. By integrating cross-scanning, adaptive focus tracking and robotics, the system addresses motion artifacts and resolution degradation from tissue movement, achieving wide-area, high-resolution imaging. We conducted intraoperative imaging on 21 patients, including 13 with spinal gliomas and 8 with other tumors. This study marks the first demonstration of OCT in situ imaging of human spinal cord tumors, providing micrometer-scale in vivo structural images and demonstrating FACT-ROCT's potential to differentiate various tumor types in real-time. Analysis of the attenuation coefficients of spinal gliomas revealed increased heterogeneity with higher malignancy grades. So, we proposed the standard deviation of the attenuation coefficient as a physical marker, achieving over 90% accuracy in distinguishing high- from low-grade gliomas intraoperatively at a threshold. FACT-ROCT even enabled extensive in vivo microvascular imaging of spinal cord tumors, covering 70 mm * 13 mm * 10 mm within 2 minutes. Quantitative vascular tortuosity comparisons confirmed greater tortuosity in higher-grade tumors. The ability to perform extensive vascular imaging and real-time tumor grading during surgery provides critical information for surgical strategy, such as minimizing intraoperative bleeding and optimizing tumor resection while preserving functional tissue. △ Less

Submitted 29 October, 2024; v1 submitted 29 October, 2024; originally announced October 2024.

Role of microstructure on flux expulsion of superconducting radio frequency cavities

Authors: B. D. Khanal, S. Balachandran, S. Chetri, M. Barron, R. Mullinix, A. Williams, P. Xu, A. Ingrole, P. J. Lee, G. Ciovati, P. Dhakal

Abstract: The trapped residual magnetic flux during the cool-down due to the incomplete Meissner state is a significant source of radio frequency losses in superconducting radio frequency (SRF) cavities. Here, we show a clear correlation between the niobium microstructure in elliptical cavity geometry and flux expulsion behavior. In particular, a traditionally fabricated Nb cavity half cell from an annealed… ▽ More The trapped residual magnetic flux during the cool-down due to the incomplete Meissner state is a significant source of radio frequency losses in superconducting radio frequency (SRF) cavities. Here, we show a clear correlation between the niobium microstructure in elliptical cavity geometry and flux expulsion behavior. In particular, a traditionally fabricated Nb cavity half cell from an annealed poly-crystalline Nb sheet after an 800 $^\circ$C heat treatment leads to a bi-modal microstructure that ties in with flux trapping and inefficient flux expulsion. This non-uniform microstructure is related to varying strain profiles along the cavity shape. A novel approach to prevent this non uniform microstructure is presented by fabricating a 1.3 GHz single cell Nb cavity with a cold-worked sheet and subsequent heat treatment leading to better flux expulsion after 800 $^\circ$C/3 h. Microstructural evolution by electron backscattered diffraction-orientation imaging microscopy on cavity cutouts, and flux pinning behavior by dc-magnetization on coupon samples confirms a reduction in flux pinning centers with increased heat treatment temperature. The heat treatment temperature dependent mechanical properties and thermal conductivity are reported. The significant impact of cold-work in this study demonstrates clear evidence for the importance of microstructure required for high-performance superconducting cavities with reduced losses caused by magnetic flux trapping. △ Less

Submitted 3 October, 2024; originally announced October 2024.

Rapid Parameter Estimation for Extreme Mass Ratio Inspirals Using Machine Learning

Authors: Bo Liang, Hong Guo, Tianyu Zhao, He wang, Herik Evangelinelis, Yuxiang Xu, Chang liu, Manjia Liang, Xiaotong Wei, Yong Yuan, Peng Xu, Minghui Du, Wei-Liang Qian, Ziren Luo

Abstract: Extreme-mass-ratio inspiral (EMRI) signals pose significant challenges in gravitational wave (GW) astronomy owing to their low-frequency nature and highly complex waveforms, which occupy a high-dimensional parameter space with numerous variables. Given their extended inspiral timescales and low signal-to-noise ratios, EMRI signals warrant prolonged observation periods. Parameter estimation becomes… ▽ More Extreme-mass-ratio inspiral (EMRI) signals pose significant challenges in gravitational wave (GW) astronomy owing to their low-frequency nature and highly complex waveforms, which occupy a high-dimensional parameter space with numerous variables. Given their extended inspiral timescales and low signal-to-noise ratios, EMRI signals warrant prolonged observation periods. Parameter estimation becomes particularly challenging due to non-local parameter degeneracies, arising from multiple local maxima, as well as flat regions and ridges inherent in the likelihood function. These factors lead to exceptionally high time complexity for parameter analysis while employing traditional matched filtering and random sampling methods. To address these challenges, the present study applies machine learning to Bayesian posterior estimation of EMRI signals, leveraging the recently developed flow matching technique based on ODE neural networks. Our approach demonstrates computational efficiency several orders of magnitude faster than the traditional Markov Chain Monte Carlo (MCMC) methods, while preserving the unbiasedness of parameter estimation. We show that machine learning technology has the potential to efficiently handle the vast parameter space, involving up to seventeen parameters, associated with EMRI signals. Furthermore, to our knowledge, this is the first instance of applying machine learning, specifically the Continuous Normalizing Flows (CNFs), to EMRI signal analysis. Our findings highlight the promising potential of machine learning in EMRI waveform analysis, offering new perspectives for the advancement of space-based GW detection and GW astronomy. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Intrinsic relationship between synchronisation thresholds and Lyapunov vectors: evidence from large eddy simulations and shell models

Authors: Jian Li, Wenwen Si, Yi Li, Peng Xu

Abstract: An important parameter characterising the synchronisation of turbulent flows is the threshold coupling wavenumber. This study investigates the relationship between the threshold coupling wavenumber and the leading Lyapunov vector using large eddy simulations and the SABRA model. Various subgrid-scale stress models, Reynolds numbers, and different coupling methods are examined. A new scaling relati… ▽ More An important parameter characterising the synchronisation of turbulent flows is the threshold coupling wavenumber. This study investigates the relationship between the threshold coupling wavenumber and the leading Lyapunov vector using large eddy simulations and the SABRA model. Various subgrid-scale stress models, Reynolds numbers, and different coupling methods are examined. A new scaling relation is identified for the leading Lyapunov exponents in large eddy simulations, showing that they approximate those of filtered direct numerical simulations. This interpretation provides a physical basis for results related to the Lyapunov exponents of large eddy simulations, including those related to synchronisation. Synchronization experiments show that the peak wavenumber of the energy spectrum of the leading Lyapunov vector coincides with the threshold coupling wavenumber, in large eddy simulations of box turbulence with standard Smagorinsky or dynamic mixed models as well as in the SABRA model, replicating results from direct numerical simulations of box turbulence. Although the dynamic Smagorinsky model exhibit different behaviour, the totality of the results suggests that the relationship is an intrinsic property of a certain class of chaotic systems. We also confirm that conditional Lyapunov exponents characterize the synchronization process in indirectly coupled systems as they do in directly coupled ones, with their values insensitive to the nature of the master flow. These findings advance the understanding of the role of the Lyapunov vector in the synchronization of turbulence. △ Less

Submitted 26 January, 2025; v1 submitted 17 July, 2024; originally announced July 2024.

Journal ref: J. Fluid Mech. 1008 (2025) A27

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Rapid Parameter Estimation for Merging Massive Black Hole Binaries Using Continuous Normalizing Flows

Authors: Bo Liang, Minghui Du, He Wang, Yuxiang Xu, Chang Liu, Xiaotong Wei, Peng Xu, Li-e Qiang, Ziren Luo

Abstract: Detecting the coalescences of massive black hole binaries (MBHBs) is one of the primary targets for space-based gravitational wave observatories such as LISA, Taiji, and Tianqin. The fast and accurate parameter estimation of merging MBHBs is of great significance for the global fitting of all resolvable sources, as well as the astrophysical interpretation of gravitational wave signals. However, su… ▽ More Detecting the coalescences of massive black hole binaries (MBHBs) is one of the primary targets for space-based gravitational wave observatories such as LISA, Taiji, and Tianqin. The fast and accurate parameter estimation of merging MBHBs is of great significance for the global fitting of all resolvable sources, as well as the astrophysical interpretation of gravitational wave signals. However, such analyses usually entail significant computational costs. To address these challenges, inspired by the latest progress in generative models, we explore the application of continuous normalizing flows (CNFs) on the parameter estimation of MBHBs. Specifically, we employ linear interpolation and trig interpolation methods to construct transport paths for training CNFs. Additionally, we creatively introduce a parameter transformation method based on the symmetry in the detector's response function. This transformation is integrated within CNFs, allowing us to train the model using a simplified dataset, and then perform parameter estimation on more general data, hence also acting as a crucial factor in improving the training speed. In conclusion, for the first time, within a comprehensive and reasonable parameter range, we have achieved a complete and unbiased 11-dimensional rapid inference for MBHBs in the presence of astrophysical confusion noise using CNFs. In the experiments based on simulated data, our model produces posterior distributions comparable to those obtained by nested sampling. △ Less

Submitted 5 December, 2024; v1 submitted 9 July, 2024; originally announced July 2024.

Optical biomarker of metabolism for breast tumor diagnosis: Insights from subcellular dynamics

Authors: Zichen Yin, Shuwei Zhang, Bin He, Houpu Yang, Zhengyu Chen, Zhangwei Hu, Yejiong Shi, Ruizhi Xue, Panqi Yang, Yuzhe Ying, Chengming Wang, Shu Wang, Ping Xue

Abstract: Label-free metabolic dynamics contrast is highly appealing but difficult to achieve in biomedical imaging. Interference offers a highly sensitive mechanism for capturing the metabolic dynamics of the subcellular scatterers. However, traditional interference detection methods fail to isolate pure metabolic dynamics, as the dynamic signals are coupled with scatterer reflectivity and other uncontroll… ▽ More Label-free metabolic dynamics contrast is highly appealing but difficult to achieve in biomedical imaging. Interference offers a highly sensitive mechanism for capturing the metabolic dynamics of the subcellular scatterers. However, traditional interference detection methods fail to isolate pure metabolic dynamics, as the dynamic signals are coupled with scatterer reflectivity and other uncontrollable imaging factors. Here, we demonstrate active phase modulation-assisted dynamic full-field optical coherence tomography (APMD-FFOCT) that decouples and quantifies the metabolic dynamics by adding a reference movement for all interferential scatterers. This novel technique enables imaging and dynamic analysis of subcellular structures along with their changes during the apoptotic process in tumor tissues. Furthermore, the nucleus-to-cytoplasm dynamic intensity ratio could serve as an optical biomarker for breast tumor grading, enhancing intraoperative diagnosis. △ Less

Submitted 6 June, 2024; originally announced June 2024.

Fast and label-free 3D virtual H&E histology via active modulation-assisted dynamic full-field OCT

Authors: Zichen Yin, Bin He, Yuzhe Ying, Shuwei Zhang, Panqi Yang, Zhengyu Chen, Zhangwei Hu, Yejiong Shi, Ruizhi Xue, Chengming Wang, Shu Wang, Guihuai Wang, Ping Xue

Abstract: Pathological features are the gold standard for tumor diagnosis, guiding treatment and prognosis. However, standard histopathological process is labor-intensive and time-consuming, while frozen sections have lower accuracy. Dynamic full-field optical coherence tomography (D-FFOCT) offers rapid histologic information by measuring the subcellular dynamics of fresh, unprocessed tissues. However, D-FF… ▽ More Pathological features are the gold standard for tumor diagnosis, guiding treatment and prognosis. However, standard histopathological process is labor-intensive and time-consuming, while frozen sections have lower accuracy. Dynamic full-field optical coherence tomography (D-FFOCT) offers rapid histologic information by measuring the subcellular dynamics of fresh, unprocessed tissues. However, D-FFOCT images suffer from abrupt shifts in hue and brightness, which is confusing for pathologists and diminish their interpretability and reliability. Here, we present active phase modulation-assisted D-FFOCT (APMD-FFOCT) to improve the imaging stability and enhance the contrast of static tissues. This enables us to further employ an unsupervised deep learning to convert APMD-FFOCT images into virtual hematoxylin and eosin (H&E) stained images for the first time. Three-dimensional (3D) virtual H&E-stained images have been obtained at a scanning rate of 1 frame per second, as demonstrated in cancer diagnosis for human central nervous system and breast. The results prove that this new method will play a unique and important role in intraoperative histology. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Efficient generation of realistic guided wave signals for reliability estimation

Authors: Panpan Xu, Robin Jones, Georgios Sarris, Peter Huthwaite

Abstract: Across non-destructive testing (NDT) and structural health monitoring (SHM), accurate knowledge of the systems' reliability for detecting defects, such as Probability of Detection (POD) analysis is essential to enabling widespread adoption. Traditionally this relies on access to extensive experimental data to cover all critical areas of the parametric space, which becomes expensive, and heavily un… ▽ More Across non-destructive testing (NDT) and structural health monitoring (SHM), accurate knowledge of the systems' reliability for detecting defects, such as Probability of Detection (POD) analysis is essential to enabling widespread adoption. Traditionally this relies on access to extensive experimental data to cover all critical areas of the parametric space, which becomes expensive, and heavily undermines the benefit such systems bring. In response to these challenges, reliability estimation based on numerical simulation emerges as a practical solution, offering enhanced efficiency and cost-effectiveness. Nevertheless, precise reliability estimation demands that the simulated data faithfully represents the real-world performance. In this context, a numerical framework tailored to generate realistic signals for reliability estimation purposes is presented here, focusing on the application of guided wave SHM for pipe monitoring. It specifically incorporates key characteristics of real signals: random noise and coherent noise caused by the imbalance in transducer performance within guided wave monitoring systems. The effectiveness of our proposed methodology is demonstrated through a comprehensive comparative analysis between simulation-generated signals and experimental signals both individually and statistically. Furthermore, to assess the reliability of a guided wave system in terms of the inspection range for pipe monitoring, a series of POD analyses using simulation-generated data were conducted. The comparison of POD curves derived from ideal and realistic simulation data underscores the necessity of considering coherent noise for accurate POD curve calculations. Moreover, the POD analysis based on realistic simulation-generated data provides a quantitative estimation of the inspection range with more details compared to the current industry practice. △ Less

Submitted 25 March, 2024; originally announced March 2024.

JefiAtten: An Attention Based Neural Network Model for Solving Maxwell's Equations with Charge and Current Sources

Authors: Ming-Yan Sun, Peng Xu, Jun-Jie Zhang, Tai-Jiao Du, Jian-Guo Wang

Abstract: We present JefiAtten, a novel neural network model employing the attention mechanism to solve Maxwell's equations efficiently. JefiAtten uses self-attention and cross-attention modules to understand the interplay between charge density, current density, and electromagnetic fields. Our results indicate that JefiAtten can generalize well to a range of scenarios, maintaining accuracy across various s… ▽ More We present JefiAtten, a novel neural network model employing the attention mechanism to solve Maxwell's equations efficiently. JefiAtten uses self-attention and cross-attention modules to understand the interplay between charge density, current density, and electromagnetic fields. Our results indicate that JefiAtten can generalize well to a range of scenarios, maintaining accuracy across various spatial distribution and handling amplitude variations. The model showcases an improvement in computation speed after training, compared to traditional integral methods. The adaptability of the model suggests potential for broader applications in computational physics, with further refinements to enhance its predictive capabilities and computational efficiency. Our work is a testament to the efficacy of integrating attention mechanisms with numerical simulations, marking a step forward in the quest for data-driven solutions to physical phenomena. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Comments: 29 pages, 11 figures

Gravitational Wave Signal Extraction Against Non-Stationary Instrumental Noises with Deep Neural Network

Authors: Yuxiang Xu, Minghui Du, Peng Xu, Bo Liang, He Wang

Abstract: Sapce-borne gravitational wave antennas, such as LISA and LISA-like mission (Taiji and Tianqin), will offer novel perspectives for exploring our Universe while introduce new challenges, especially in data analysis. Aside from the known challenges like high parameter space dimension, superposition of large number of signals etc., gravitational wave detections in space would be more seriously affect… ▽ More Sapce-borne gravitational wave antennas, such as LISA and LISA-like mission (Taiji and Tianqin), will offer novel perspectives for exploring our Universe while introduce new challenges, especially in data analysis. Aside from the known challenges like high parameter space dimension, superposition of large number of signals etc., gravitational wave detections in space would be more seriously affected by anomalies or non-stationarities in the science measurements. Considering the three types of foreseeable non-stationarities including data gaps, transients (glitches), and time-varying noise auto-correlations, which may come from routine maintenance or unexpected disturbances during science operations, we developed a deep learning model for accurate signal extractions confronted with such anomalous scenarios. Our model exhibits the same performance as the current state-of-the-art models do for the ideal and anomaly free scenario, while shows remarkable adaptability in extractions of coalescing massive black hole binary signal against all three types of non-stationarities and even their mixtures. This also provide new explorations into the robustness studies of deep learning models for data processing in space-borne gravitational wave missions. △ Less

Submitted 16 September, 2024; v1 submitted 20 February, 2024; originally announced February 2024.

Comments: 13 pages, 11 figures, 6 tables

Journal ref: Published in Physics Letters B, Volume 858, November 2024, 139016

Probing the interaction energy of two $^{85}$Rb atoms in an optical tweezer via spin-motion coupling

Authors: Jun Zhuang, Kun-Peng Wang, Peng-Xiang Wang, Ming-Rui Wei, Bahtiyar Mamat, Cheng Sheng, Peng Xu, Min Liu, Jin Wang, Xiao-Dong He, Ming-Sheng Zhan

Abstract: The inherent polarization gradients in tight optical tweezers can be used to couple the atomic spins to the two-body motion under the action of a microwave spin-flip transition, so that such a spin-motion coupling offers an important control knob on the motional states of optically trapped two colliding atoms. Here, after preparing two elastically scattering $^{85}$Rb atoms in the three-dimensiona… ▽ More The inherent polarization gradients in tight optical tweezers can be used to couple the atomic spins to the two-body motion under the action of a microwave spin-flip transition, so that such a spin-motion coupling offers an important control knob on the motional states of optically trapped two colliding atoms. Here, after preparing two elastically scattering $^{85}$Rb atoms in the three-dimensional ground-state in the optical tweezer, we employed this control in order to probe the colliding energies of elastic and inelastic channels. The combination of microwave spectra and corresponding s-wave pseudopotential model allows us to infer the effect of the state-dependent trapping potentials on the elastic colliding energies, as well as to reveal how the presence of inelastic interactions affects elastic part of the relative potential. Our work shows that the spin-motion coupling in a tight optical tweezer expand the experimental toolbox for fundamental studies of ultracold collisions in the two body systems with reactive collisions, and potentially for that of more complex interactions, such as optically trapped atom-molecule and molecule-molecule interactions. △ Less

Submitted 2 July, 2024; v1 submitted 12 February, 2024; originally announced February 2024.

Comments: 8 pages, 5 figures

Journal ref: Phys. Rev. A 109, 043320 (2024)

YingLong-weather: AI-Based Limited Area Models for Forecasting of Non-precipitation Surface Meteorological Variables

Authors: Pengbo Xu, Xiaogu Zheng, Tianyan Gao, Yu Wang, Junping Yin, Juan Zhang, Xuanze Zhang, San Luo, Zhonglei Wang, Zhimin Zhang, Xiaoguang Hu, Xiaoxu Chen

Abstract: Recently, artificial intelligence-based (AI-based) models for forecasting of global weather have been rapidly developed. Most of the global models are trained on reanalysis datasets with a spatial resolution of 0.25°*0.25°. However, research on AI-based high spatial resolution limited area weather forecasting models remains limited. In this study, YingLong, an AI-based limited area weather forecas… ▽ More Recently, artificial intelligence-based (AI-based) models for forecasting of global weather have been rapidly developed. Most of the global models are trained on reanalysis datasets with a spatial resolution of 0.25°*0.25°. However, research on AI-based high spatial resolution limited area weather forecasting models remains limited. In this study, YingLong, an AI-based limited area weather forecasting model with a spatial resolution of 3 km * 3 km is developed. YingLong employs a parallel structure of global and local blocks to capture multiscale meteorological features and operates much faster than the dynamical limited area model WRF-ARW. In two selected limited areas (one relatively flat and the other featuring significant mountain ranges), YingLong (with lateral boundary condition imposed by the global AI-based model Pangu-weather) demonstrates superior skill in forecasting surface wind speed compared to WRF-ARW. Additionally, it shows comparable skill in forecasting surface temperature and pressure. The accuracy of surface temperature and humidity forecasts can be further improved by applying better boundary conditions. YingLong also addresses issues related to the lateral boundary conditions of AI-based limited area models, such as selecting the width of the lateral boundary region and combining finer and coarser resolution predictions in this region. Therefore, YingLong has a great potential to generate cost-effective multiyear high-resolution synthetic wind speed that maintain meteorological realism both spatially and temporally, aiding in the planning and operations for wind power generation companies. △ Less

Submitted 26 January, 2025; v1 submitted 29 January, 2024; originally announced January 2024.

Discrete differential geometry-based model for nonlinear analysis of axisymmetric shells

Authors: Weicheng Huang, Tianzhen Liu, Zhaowei Liu, Peifei Xu, Mingchao Liu, Yuzhen Chen, K. Jimmy Hsia

Abstract: In this paper, we propose a novel one-dimensional (1D) discrete differential geometry (DDG)-based numerical method for geometrically nonlinear mechanics analysis (e.g., buckling and snapping) of axisymmetric shell structures. Our numerical model leverages differential geometry principles to accurately capture the complex nonlinear deformation patterns exhibited by axisymmetric shells. By discretiz… ▽ More In this paper, we propose a novel one-dimensional (1D) discrete differential geometry (DDG)-based numerical method for geometrically nonlinear mechanics analysis (e.g., buckling and snapping) of axisymmetric shell structures. Our numerical model leverages differential geometry principles to accurately capture the complex nonlinear deformation patterns exhibited by axisymmetric shells. By discretizing the axisymmetric shell into interconnected 1D elements along the meridional direction, the in-plane stretching and out-of-bending potentials are formulated based on the geometric principles of 1D nodes and edges under the Kirchhoff-Love hypothesis, and elastic force vector and associated Hession matrix required by equations of motion are later derived based on symbolic calculation. Through extensive validation with available theoretical solutions and finite element method (FEM) simulations in literature, our model demonstrates high accuracy in predicting the nonlinear behavior of axisymmetric shells. Importantly, compared to the classical theoretical model and three-dimensional (3D) FEM simulation, our model is highly computationally efficient, making it suitable for large-scale real-time simulations of nonlinear problems of shell structures such as instability and snap-through phenomena. Moreover, our framework can easily incorporate complex loading conditions, e.g., boundary nonlinear contact and multi-physics actuation, which play an essential role in the use of engineering applications, such as soft robots and flexible devices. This study demonstrates that the simplicity and effectiveness of the 1D discrete differential geometry-based approach render it a powerful tool for engineers and researchers interested in nonlinear mechanics analysis of axisymmetric shells, with potential applications in various engineering fields. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Comments: 36 pages, 11 figures

Damping Separation of Finite Open Systems in Gravity-Related Experiments in the Free Molecular Flow Regime

Authors: Hou-Qiang Teng, Jia-Qi Dong, Yisen Wang, Liang Huang, Peng Xu

Abstract: The residual gas damping of the test mass (TM) in the free molecular flow regime is studied in the finite open systems for high-precision gravity-related experiments. Through strict derivation, we separate the damping coefficients for two finite open systems, i.e., the bi-plate system and the sensor core system, into base damping and diffusion damping. This elucidates the relationship between the… ▽ More The residual gas damping of the test mass (TM) in the free molecular flow regime is studied in the finite open systems for high-precision gravity-related experiments. Through strict derivation, we separate the damping coefficients for two finite open systems, i.e., the bi-plate system and the sensor core system, into base damping and diffusion damping. This elucidates the relationship between the free damping in the infinite gas volume and the proximity damping in the constrained volume, unifies them into one microscopic picture, and allows us to point out three pathways of energy dissipation in the bi-plate gap. We also provide the conditions that need to be met to achieve this separation. In applications, for space gravitational wave detection, our results for the residual gas damping coefficient for the 4TM torsion balance experiment is the closest one to the experimental and simulation data compared to previous models. For the LISA mission, our estimation for residual gas acceleration noise at the sensitive axis is consistent with the simulation result, within about $5\%$ difference. In addition, in the test of the gravitational inverse-square law, our results suggest that the constraint on the distance between TM and the conducting membrane can be reduced by about $28\%$. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Mitigating noise of residual electric fields for single Rydberg atoms with electron photodesorption

Authors: Bahtiyar Mamat, Cheng Sheng, Xiaodong He, Jiayi Hou, Peng Xu, Kunpeng Wang, Jun Zhuang, Mingrui Wei, Min Liu, Jin Wang, Mingsheng Zhan

Abstract: Rydberg atoms as versatile tools for quantum applications are extremely sensitive to electric fields. When utilizing these atoms, it becomes imperative to comprehensively characterize and mitigate any residual electric fields present in the environment. Particularly for single Rydberg atoms trapped in optical tweezers in a compact quartz vacuum cell, we have identified that a significant source of… ▽ More Rydberg atoms as versatile tools for quantum applications are extremely sensitive to electric fields. When utilizing these atoms, it becomes imperative to comprehensively characterize and mitigate any residual electric fields present in the environment. Particularly for single Rydberg atoms trapped in optical tweezers in a compact quartz vacuum cell, we have identified that a significant source of background electric fields originates from electrons bound to the cell surface. These electrons are generated by the 297-nm light used for single-photon Rydberg excitation. Furthermore, once the electrons are desorbed from the surface through exposure to ultraviolet light, the incoherent ground-Rydberg transition undergoes a transformation into coherent excitation, since the noise of residual electric fields are effectively mitigated. Our studies promote enhanced control and reliable performance of Rydberg atom-based systems, thereby paving the way for advancements in quantum information processing, the realization of high-fidelity quantum gates, and the development of precise quantum sensors. △ Less

Submitted 26 February, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Self acceleration from spectral geometry in dissipative quantum-walk dynamics

Authors: Peng Xue, Quan Lin, Kunkun Wang, Lei Xiao, Stefano Longhi, Wei Yi

Abstract: Dynamic behaviors of a physical system often originate from its spectral properties. In open systems, where the effective non-Hermitian description enables a wealth of spectral structures on the complex plane, the concomitant dynamics is significantly enriched, whereas the identification and comprehension of the underlying connections are challenging. Here we experimentally demonstrate the corresp… ▽ More Dynamic behaviors of a physical system often originate from its spectral properties. In open systems, where the effective non-Hermitian description enables a wealth of spectral structures on the complex plane, the concomitant dynamics is significantly enriched, whereas the identification and comprehension of the underlying connections are challenging. Here we experimentally demonstrate the correspondence between the transient self acceleration of local excitations and the non-Hermitian spectral topology using lossy photonic quantum walks. Focusing first on one-dimensional quantum walks, we show that the measured short-time acceleration of the wave function is proportional to the area enclosed by the eigenspectrum. We then reveal similar correspondence in two-dimension quantum walks, where the self acceleration is proportional to the volume enclosed by the eigenspectrum in the complex parameter space. In both dimensions, the transient self acceleration crosses over to a long-time behavior dominated by a constant flow at the drift velocity. Our results unveil the universal correspondence between spectral topology and transient dynamics, and offer a sensitive probe for phenomena in non-Hermitian systems that originate from spectral geometry. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 12 pages, 6 figures

Journal ref: Nat Commun 15, 4381 (2024)

Shoreline Responses to Rapid Water Level Increases in Lake Michigan

Authors: Hazem U. Abdelhady, Cary D. Troy, Longhuan Zhu, Pengfei Xue, Guy Meadows, Chin H. Wu

Abstract: High-resolution multispectral satellite imagery was utilized to quantify shoreline recession at eleven beaches around Lake Michigan during a record-setting water level increase between 2013 and 2020. Shoreline changes during this period ranged from 20 m to 62 m, corresponding to 52-95% of the initial beach widths. Average estimated shoreline erosion across all beaches varied from 1% to 75% of the… ▽ More High-resolution multispectral satellite imagery was utilized to quantify shoreline recession at eleven beaches around Lake Michigan during a record-setting water level increase between 2013 and 2020. Shoreline changes during this period ranged from 20 m to 62 m, corresponding to 52-95% of the initial beach widths. Average estimated shoreline erosion across all beaches varied from 1% to 75% of the observed changes, with the remainder attributed to inundation. Significant correlations were found between shoreline erosion and wave-related factors, including offshore wave power, offshore bathymetric slope, storm energy, and potential alongshore sediment transport divergence. In contrast, parameters related to cross-shore transport, such as dimensionless fall velocity, exhibited weak correlations. Additionally, the results underscore the importance of distinguishing between immediately reversible changes (inundation) and morphological changes that could be reversible over longer timescales, when assessing the impact of rising water levels., The findings also suggest that in addition to waves playing a key role in regulating shoreline changes, alongshore sediment transport processes may play a more crucial role in beach erosion during significant water level increases than cross-shore processes, challenging traditional models of beach adjustment to rising waters. △ Less

Submitted 1 February, 2025; v1 submitted 25 September, 2023; originally announced September 2023.

Journal ref: Geomorphology (2025): 109639

Development of helium turbine loss model based on knowledge transfer with Neural Network and its application on aerodynamic design

Authors: Changxing Liu, Zhengping Zou, Pengcheng Xu, Yifan Wang

Abstract: Helium turbines are widely used in the Closed Brayton Cycle for power generation and aerospace applications. The primary concerns of designing highly loaded helium turbines include choosing between conventional and contra-rotating designs and the guidelines for selecting design parameters. A loss model serving as an evaluation means is the key to addressing this issue. Due to the property disparit… ▽ More Helium turbines are widely used in the Closed Brayton Cycle for power generation and aerospace applications. The primary concerns of designing highly loaded helium turbines include choosing between conventional and contra-rotating designs and the guidelines for selecting design parameters. A loss model serving as an evaluation means is the key to addressing this issue. Due to the property disparities between helium and air, turbines utilizing either as working fluid experience distinct loss mechanisms. Consequently, directly applying gas turbine experience to the design of helium turbines leads to inherent inaccuracies. A helium turbine loss model is developed by combining knowledge transfer and the Neural Network method to accurately predict performance at design and off-design points. By utilizing the loss model, design parameter selection guidelines for helium turbines are obtained. A comparative analysis is conducted of conventional and contra-rotating helium turbine designs. Results show that the prediction errors of the loss model are below 0.5% at over 90% of test samples, surpassing the accuracy achieved by the gas turbine loss model. Design parameter selection guidelines for helium turbines differ significantly from those based on gas turbine experience. The contra-rotating helium turbine design exhibits advantages in size, weight, and aerodynamic performance. △ Less

Submitted 13 September, 2023; originally announced September 2023.

A real-time hole depth diagnostic based on coherent imaging with plasma amendment during femtosecondlaser hole-drilling

Authors: Ping Xu, Yi Yu, Chijie Xiao, Ruijia Liu, Kang Zha, Lin Zhou, Yongtao Liu, Zhou Xu

Abstract: An in-process coherent imaging diagnostic has been developed to real-time measure the hole depth during air-film hole drilling by a femtosecond laser. A super-luminescent diode with a wavelength of 830~13 nm is chosen as the coherent light source which determines a depth resolution of 12 μm. The drilled hole is coupled as a part of the sample arm and the depth variation can be extracted from the l… ▽ More An in-process coherent imaging diagnostic has been developed to real-time measure the hole depth during air-film hole drilling by a femtosecond laser. A super-luminescent diode with a wavelength of 830~13 nm is chosen as the coherent light source which determines a depth resolution of 12 μm. The drilled hole is coupled as a part of the sample arm and the depth variation can be extracted from the length variation of the optical path. Interference is realized in the detection part and a code has been written to discriminate the interference fringes. Density of plasma in the hole is diagnosed to evaluate its amendment to the optical path length and the depth measurement error induced by plasma is non-ignorable when drilling deep holes. △ Less

Submitted 17 June, 2023; originally announced September 2023.

Advancing Space-Based Gravitational Wave Astronomy: Rapid Parameter Estimation via Normalizing Flows

Authors: Minghui Du, Bo Liang, He Wang, Peng Xu, Ziren Luo, Yueliang Wu

Abstract: Gravitational wave (GW) astronomy is witnessing a transformative shift from terrestrial to space-based detection, with missions like Taiji at the forefront. While the transition brings unprecedented opportunities for exploring massive black hole binaries (MBHBs), it also imposes complex challenges in data analysis, particularly in parameter estimation amidst confusion noise. Addressing this gap, w… ▽ More Gravitational wave (GW) astronomy is witnessing a transformative shift from terrestrial to space-based detection, with missions like Taiji at the forefront. While the transition brings unprecedented opportunities for exploring massive black hole binaries (MBHBs), it also imposes complex challenges in data analysis, particularly in parameter estimation amidst confusion noise. Addressing this gap, we utilize scalable normalizing flow models to achieve rapid and accurate inference within the Taiji environment. Innovatively, our approach simplifies the data's complexity, employs a transformation mapping to overcome the year-period time-dependent response function, and unveils additional multimodality in the arrival time parameter. Our method estimates MBHBs several orders of magnitude faster than conventional techniques, maintaining high accuracy even in complex backgrounds. These findings significantly enhance the efficiency of GW data analysis, paving the way for rapid detection and alerting systems and enriching our ability to explore the universe through space-based GW observation. △ Less

Submitted 20 February, 2024; v1 submitted 10 August, 2023; originally announced August 2023.

Comments: 14 pages, 7 figures. Published version

Journal ref: SCIENCE CHINA Physics, Mechanics & Astronomy, Volume 67, Issue 3: 230412 (2024)

RBG-Maxwell Framework: Simulation of Collisional Plasma Systems via Coupled Boltzmann-Maxwell equations on GPU

Authors: Ming-Yan Sun, Peng Xu, Jun-Jie Zhang, Qun Wang, Tai-Jiao Du, Jian-Guo Wang

Abstract: This paper presents the RBG-Maxwell framework, a relativistic collisional plasma simulator on GPUs. We provide detailed discussions on the fundamental equations, numerical algorithms, implementation specifics, and key testing outcomes. The RBG-Maxwell framework is a robust numerical code designed for simulating the evolution of plasma systems through a kinetic approach on large-scale GPUs. It offe… ▽ More This paper presents the RBG-Maxwell framework, a relativistic collisional plasma simulator on GPUs. We provide detailed discussions on the fundamental equations, numerical algorithms, implementation specifics, and key testing outcomes. The RBG-Maxwell framework is a robust numerical code designed for simulating the evolution of plasma systems through a kinetic approach on large-scale GPUs. It offers easy adaptability to a wide range of physical systems. Given the appropriate initial distributions, particle masses, charges, differential cross-sections, and external forces (which are not confined to electromagnetic forces), the RBG-Maxwell framework can direct the evolution of a particle system from a non-equilibrium state to a thermal state. △ Less

Submitted 9 August, 2023; originally announced August 2023.

Comments: 21 pages, 10 figures

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. Jin, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

Unsupervised noise reductions for gravitational reference sensors or accelerometers based on Noise2Noise method

Authors: Zhilan Yang, Haoyue Zhang, Peng Xu, Ziren Luo

Abstract: Onboard electrostatic suspension inertial sensors are important applications for gravity satellites and space gravitational wave detection missions, and it is important to suppress noise in the measurement signal. Due to the complex coupling between the working space environment and the satellite platform, the process of noise generation is extremely complex, and traditional noise modeling and sub… ▽ More Onboard electrostatic suspension inertial sensors are important applications for gravity satellites and space gravitational wave detection missions, and it is important to suppress noise in the measurement signal. Due to the complex coupling between the working space environment and the satellite platform, the process of noise generation is extremely complex, and traditional noise modeling and subtraction methods have certain limitations. With the development of deep learning, applying it to high-precision inertial sensors to improve the signal-to-noise ratio is a practically meaningful task. Since there is a single noise sample and unknown true value in the measured data in orbit, odd-even sub-samplers and periodic sub-samplers are designed to process general signals and periodic signals, and adds reconstruction layers consisting of fully connected layers to the model. Experimental analysis and comparison are conducted based on simulation data, GRACE-FO acceleration data and Taiji-1 acceleration data. The results show that the deep learning method is superior to traditional data smoothing processing sol △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: 16 pages, 17 figures

Moment-based space-variant Shack-Hartmann wavefront reconstruction

Authors: Fan Feng, Chen Liang, Dongdong Chen, Ke Du, Runjia Yang, Chang Lu, Shumin Chen, Wenting He, Pingyong Xu, Liangyi Chen, Louis Tao, Heng Mao

Abstract: Based on image moment theory, an approach for space-variant Shack-Hartmann wavefront reconstruction is presented in this article. The relation between the moment of a pair of subimages and the local transformation coefficients is derived. The square guide 'star' is used to obtain a special solution from this relation. The moment-based wavefront reconstruction has a reduced computational complexity… ▽ More Based on image moment theory, an approach for space-variant Shack-Hartmann wavefront reconstruction is presented in this article. The relation between the moment of a pair of subimages and the local transformation coefficients is derived. The square guide 'star' is used to obtain a special solution from this relation. The moment-based wavefront reconstruction has a reduced computational complexity compared to the iteration-based algorithm. Image restorations are executed by the tiling strategy with 5 $\times$ 5 PSFs as well as the conventional strategy with a global average PSF. Visual and quantitative evaluations support our approach. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Comments: This paper has been accepted for publication in the journal Optics Communications on April 12th, 2023

Report number: OPTICS_129515

Journal ref: Optics Communications,2023

A Systematic Approach for Inertial Sensor Calibration of Gravity Recovery Satellites and Its Application to Taiji-1 Mission

Authors: Haoyue Zhang, Peng Xu, Zongqi Ye, Dong Ye, Li-E Qiang, Ziren Luo, Keqi Qi, Shaoxin Wang, Zhiming Cai, Zuolei Wang, Jungang Lei, Yueliang Wu

Abstract: High-precision inertial sensors or accelerometers can provide us references of free-falling motions in gravitational field in space. They serve as the key payloads for gravity recovery missions such as the CHAMP, the GRACE-type missions, and the planned Next Generation Gravity Missions. In this work, a systematic method of electrostatic inertial sensor calibrations for gravity recovery satellites… ▽ More High-precision inertial sensors or accelerometers can provide us references of free-falling motions in gravitational field in space. They serve as the key payloads for gravity recovery missions such as the CHAMP, the GRACE-type missions, and the planned Next Generation Gravity Missions. In this work, a systematic method of electrostatic inertial sensor calibrations for gravity recovery satellites is suggested, which is applied to and verified with the Taiji-1 mission. With this method, the complete operating parameters including the scale factors, the center of mass offset vector and the intrinsic biased acceleration can be precisely calibrated with only two sets of short-term in-orbit experiments. Taiji-1 is the first technology demonstration satellite of the "Taiji Program in Space", which, in its final extended phase in 2022, could be viewed as operating in the mode of a high-low satellite-to-satellite tracking gravity mission. Based on the calibration principles, swing maneuvers with time span about 200 s and rolling maneuvers for 19 days were conducted by Taiji-1 in 2022. The inertial sensor's operating parameters are precisely re-calibrated with Kalman filters and are updated to the Taiji-1 science team. Data from one of the sensitive axis is re-processed with the updated operating parameters, and the performance is found to be slightly improved compared with former results. This approach could be of high reference value for the accelerometer or inertial sensor calibrations of the GFO, the Chinese GRACE-type mission, and the Next Generation Gravity Missions. This could also shed some light on the in-orbit calibrations of the ultra-precision inertial sensors for future GW space antennas because of the technological inheritance between these two generations of inertial sensors. △ Less

Submitted 3 August, 2023; v1 submitted 2 April, 2023; originally announced April 2023.

Comments: 24 pages, 19 figures

Journal ref: Remote Sens. 2023, 15, 3817

STCF Conceptual Design Report: Volume 1 -- Physics & Detector

Authors: M. Achasov, X. C. Ai, R. Aliberti, L. P. An, Q. An, X. Z. Bai, Y. Bai, O. Bakina, A. Barnyakov, V. Blinov, V. Bobrovnikov, D. Bodrov, A. Bogomyagkov, A. Bondar, I. Boyko, Z. H. Bu, F. M. Cai, H. Cai, J. J. Cao, Q. H. Cao, Z. Cao, Q. Chang, K. T. Chao, D. Y. Chen, H. Chen , et al. (413 additional authors not shown)

Abstract: The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,… ▽ More The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies. △ Less

Submitted 5 October, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Journal ref: Front. Phys. 19(1), 14701 (2024)

Observation of non-Hermitian edge burst in quantum dynamics

Authors: Lei Xiao, Wen-Tan Xue, Fei Song, Yu-Min Hu, Wei Yi, Zhong Wang, Peng Xue

Abstract: The non-Hermitian skin effect, by which the eigenstates of Hamiltonian are predominantly localized at the boundary, has revealed a strong sensitivity of non-Hermitian systems to the boundary condition. Here we experimentally observe a striking boundary-induced dynamical phenomenon known as the non-Hermitian edge burst, which is characterized by a sharp boundary accumulation of loss in non-Hermitia… ▽ More The non-Hermitian skin effect, by which the eigenstates of Hamiltonian are predominantly localized at the boundary, has revealed a strong sensitivity of non-Hermitian systems to the boundary condition. Here we experimentally observe a striking boundary-induced dynamical phenomenon known as the non-Hermitian edge burst, which is characterized by a sharp boundary accumulation of loss in non-Hermitian time evolutions. In contrast to the eigenstate localization, the edge burst represents a generic non-Hermitian dynamical phenomenon that occurs in real time. Our experiment, based on photonic quantum walks, not only confirms the prediction of the phenomenon, but also unveils its complete space-time dynamics. Our observation of edge burst paves the way for studying the rich real-time dynamics in non-Hermitian topological systems. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. Lett. 133, 070801 (2024)

Experimental Simulation of Symmetry-Protected Higher-Order Exceptional Points with Single Photons

Authors: Kunkun Wang, Lei Xiao, Haiqing Lin, Wei Yi, Emil J. Bergholtz, Peng Xue

Abstract: Exceptional points (EPs) of non-Hermitian (NH) systems have recently attracted increasing attention due to their rich phenomenology and intriguing applications. Compared to the predominantly studied second-order EPs, higher-order EPs have been assumed to play a much less prominent role because they generically require the tuning of more parameters. Here we experimentally simulate two-dimensional t… ▽ More Exceptional points (EPs) of non-Hermitian (NH) systems have recently attracted increasing attention due to their rich phenomenology and intriguing applications. Compared to the predominantly studied second-order EPs, higher-order EPs have been assumed to play a much less prominent role because they generically require the tuning of more parameters. Here we experimentally simulate two-dimensional topological NH band structures using single-photon interferometry, and observe topologically stable third-order EPs obtained by tuning only two real parameters in the presence of symmetry. In particular, we explore how different symmetries stabilize qualitatively different third-order EPs: the parity-time symmetry leads to a generic cube-root dispersion, while a generalized chiral symmetry implies a square-root dispersion coexisting with a flat band. Additionally, we simulate fourfold degeneracies, composed of the non-defective twofold degeneracies and second-order EPs. Our work reveals the abundant and conceptually richer higher-order EPs protected by symmetries and offers a versatile platform for further research on topological NH systems. △ Less

Submitted 6 September, 2023; v1 submitted 21 March, 2023; originally announced March 2023.

Comments: 15 pages, 9 figures

Journal ref: Sci. Adv. 9, eadi0732 (2023)

Evolution of the number and temperature of the remaining cold atoms in CW-laser photoionization of laser-cooled $^{87}$Rb atoms

Authors: Fei Wang, Feng-Dong Jia, Wei-Chen Liang, Xiao-Kang Li, Yu-Han Wang, Jing-Yu Qian, Dian-Cheng Zhang, Yong Wu, Jian-Guo Wang, Rong-Hua Lu, Xiang-Yuan Xu, Ya-Ping Ruan, Ping Xue, Zhi-Ping Zhong

Abstract: Based on the Rb$^+$-Rb hybrid trap, we investigate the effect of ion-atom elastic collisions on the number and temperature of the remaining atoms. We measured the remaining atomic number and temperature as a function of the wavelength and intensity of the ionization laser, and whether the ion trap was turned on. Fittings with a single exponential decay function plus an offset to the number and rad… ▽ More Based on the Rb$^+$-Rb hybrid trap, we investigate the effect of ion-atom elastic collisions on the number and temperature of the remaining atoms. We measured the remaining atomic number and temperature as a function of the wavelength and intensity of the ionization laser, and whether the ion trap was turned on. Fittings with a single exponential decay function plus an offset to the number and radius of the remaining atoms are found to be in good agreement. We found a difference in the exponential factor of different wavelengths of ionization laser with the ion trap on or off. We suppose that the presence of electrons affects ion-atom collisions through disorder-induced heating. Our research contributes to a better understanding of how ultracold neutral plasma evolves, particularly the subsequent kinetics of atomic processes, which also serves as a useful reference for high-energy-density plasma. △ Less

Submitted 21 March, 2023; v1 submitted 18 March, 2023; originally announced March 2023.

Comments: 14 figures, 9 pages

Generation of cold polyatomic cations by cascade reactive two-body ion-atom collisions

Authors: Wei-Chen Liang, Feng-Dong Jia, Fei Wang, Xi Zhang, Yu-Han Wang, Jing-Yu Qian, Xiao-Qing Hu, Yong Wu, Jian-Guo Wang, Ping Xue, Zhi-Ping Zhong

Abstract: Polyatomic cations $^{87}$Rb$_M^+$ ($M$ = 2, 3,$\ldots$) have been produced by cascade two-body ion-atom reactive collisions in the two-step CW-laser photoionization of laser-cooled $^{87}$Rb atoms and accumulated in the ion trap. Using resonant-excitation mass spectrometry and resonant excitation-assisted time-of-flight mass spectrometry, we directly observed and distinguished the charged reactio… ▽ More Polyatomic cations $^{87}$Rb$_M^+$ ($M$ = 2, 3,$\ldots$) have been produced by cascade two-body ion-atom reactive collisions in the two-step CW-laser photoionization of laser-cooled $^{87}$Rb atoms and accumulated in the ion trap. Using resonant-excitation mass spectrometry and resonant excitation-assisted time-of-flight mass spectrometry, we directly observed and distinguished the charged reaction products. We experimentally verified the cascade generation and cascade dissociation of $^{87}$Rb$_M^+$. The populations of $^{87}$Rb$_M^+$ are quantitatively investigated by solving the rate equations. The $^{87}$Rb$^+$-$^{87}$Rb reaction rate coefficient was derived as 9.10$\times10^{-11}$ cm$^3$/s accordingly. The methods developed here for assembling and detecting homonuclear polyatomic cations can be applied to any experiment in ion-atom hybrid traps. The present study lays the foundation for exploring atomically precise metal clusters and physics from few- to many-body perspective. △ Less

Submitted 10 July, 2024; v1 submitted 18 March, 2023; originally announced March 2023.

Comments: 5 figures

Advanced Analytics on 3D X-ray Tomography of Irradiated Silicon Carbide Claddings

Authors: Fei Xu, Joshua J. Kane, Peng Xu, Jason L. Schulthess, Sean Gonderman, Nikolaus L. Cordesa

Abstract: Silicon Carbide (SiC) ceramic matrix composite (CMC) cladding is currently being pursued as one of the leading candidates for accident-tolerant fuels. To enable an improved understanding of SiC-SiC composite performance, the development of non-destructive evaluation techniques to assess critical defects is needed. Three-dimensional (3D) X-ray imaging, also referred to as X-ray computed tomography… ▽ More Silicon Carbide (SiC) ceramic matrix composite (CMC) cladding is currently being pursued as one of the leading candidates for accident-tolerant fuels. To enable an improved understanding of SiC-SiC composite performance, the development of non-destructive evaluation techniques to assess critical defects is needed. Three-dimensional (3D) X-ray imaging, also referred to as X-ray computed tomography (CT), is a non-destructive, data-rich characterization technique that can provide surface and subsurface spatial information. This paper discusses the design and implementation of a fully automatic workflow to detect and analyze SiC-SiC defects using image processing techniques on 3D X-ray images. The workflow consists of four processing blocks, including data preparation, void/crack detection, visualization, and analysis. In this work, three SiC samples (two irradiated and one unirradiated) provided by General Atomics are investigated. The irradiated samples were exposed in a way that was expected to induce cracking, and indeed, the automated workflow developed in this work was able to successfully identify and characterize the crack formation in the irradiated samples while detecting no observed cracking in the unirradiated sample. These results demonstrate the value of automated XCT tools to better understand the damage and damage propagation in SiC-SiC structures for nuclear applications. △ Less

Submitted 5 March, 2023; originally announced March 2023.

Comments: 10 figures, 4 tables, 17 pages

High speed free-space optical communication using standard fiber communication component without optical amplification

Authors: Yao Zhang, Hua-Ying Liu, Xiaoyi Liu, Peng Xu, Xiang Dong, Pengfei Fan, Xiaohui Tian, Hua Yu, Dong Pan, Zhijun Yin, Guilu Long, Shi-Ning Zhu, Zhenda Xie

Abstract: Free-space optical communication (FSO) can achieve fast, secure and license-free communication without need for physical cables, making it a cost-effective, energy-efficient and flexible solution when the fiber connection is unavailable. To establish FSO connection on-demand, it is essential to build portable FSO devices with compact structure and light weight. Here, we develop a miniaturized FSO… ▽ More Free-space optical communication (FSO) can achieve fast, secure and license-free communication without need for physical cables, making it a cost-effective, energy-efficient and flexible solution when the fiber connection is unavailable. To establish FSO connection on-demand, it is essential to build portable FSO devices with compact structure and light weight. Here, we develop a miniaturized FSO system and realize 9.16 Gbps FSO between two nodes that is 1 km apart, using a commercial single-mode-fiber-coupled optical transceiver module without optical amplification. Using our 4-stage acquisition, pointing and tracking (APT) systems, the tracking error is within 3 μrad and results an average link loss of 13.7 dB, which is the key for this high-bandwidth FSO demonstration without optical amplification. Our FSO link has been tested up to 4 km, with link loss of 18 dB that is limited by the foggy weather during the test. Longer FSO distances can be expected with better weather condition and optical amplification. With single FSO device weight of only 9.5 kg, this result arouses massive applications of field-deployable high-speed wireless communication. △ Less

Submitted 16 April, 2023; v1 submitted 27 February, 2023; originally announced February 2023.

Comments: 7 pages, 5 figures

Large-scale full-programmable quantum walk and its applications

Authors: Yizhi Wang, Yingwen Liu, Junwei Zhan, Shichuan Xue, Yuzhen Zheng, Ru Zeng, Zhihao Wu, Zihao Wang, Qilin Zheng, Dongyang Wang, Weixu Shi, Xiang Fu, Ping Xu, Yang Wang, Yong Liu, Jiangfang Ding, Guangyao Huang, Chunlin Yu, Anqi Huang, Xiaogang Qiang, Mingtang Deng, Weixia Xu, Kai Lu, Xuejun Yang, Junjie Wu

Abstract: With photonics, the quantum computational advantage has been demonstrated on the task of boson sampling. Next, developing quantum-enhanced approaches for practical problems becomes one of the top priorities for photonic systems. Quantum walks are powerful kernels for developing new and useful quantum algorithms. Here we realize large-scale quantum walks using a fully programmable photonic quantum… ▽ More With photonics, the quantum computational advantage has been demonstrated on the task of boson sampling. Next, developing quantum-enhanced approaches for practical problems becomes one of the top priorities for photonic systems. Quantum walks are powerful kernels for developing new and useful quantum algorithms. Here we realize large-scale quantum walks using a fully programmable photonic quantum computing system. The system integrates a silicon quantum photonic chip, enabling the simulation of quantum walk dynamics on graphs with up to 400 vertices and possessing full programmability over quantum walk parameters, including the particle property, initial state, graph structure, and evolution time. In the 400-dimensional Hilbert space, the average fidelity of random entangled quantum states after the whole on-chip circuit evolution reaches as high as 94.29$\pm$1.28$\%$. With the system, we demonstrated exponentially faster hitting and quadratically faster mixing performance of quantum walks over classical random walks, achieving more than two orders of magnitude of enhancement in the experimental hitting efficiency and almost half of the reduction in the experimental evolution time for mixing. We utilize the system to implement a series of quantum applications, including measuring the centrality of scale-free networks, searching targets on Erdös-Rényi networks, distinguishing non-isomorphic graph pairs, and simulating the topological phase of higher-order topological insulators. Our work shows one feasible path for quantum photonics to address applications of practical interests in the near future. △ Less

Submitted 28 August, 2022; originally announced August 2022.

Probing Supermassive Black Hole Binaries with Orbital Resonances of Laser-Ranged Satellite

Authors: Minghui Du, Qiong Deng, Yifan Bian, Ziren Luo, Peng Xu

Abstract: Coalescing supermassive black hole binaries (SMBHBs) are the primary source candidates for low frequency gravitational wave (GW) detections, which could bring us deep insights into galaxy evolutions over cosmic time and violent processes of spacetime dynamics. Promising candidates had been found based on optical and X-ray observations, which claims for new and ready-to-use GW detection approaches… ▽ More Coalescing supermassive black hole binaries (SMBHBs) are the primary source candidates for low frequency gravitational wave (GW) detections, which could bring us deep insights into galaxy evolutions over cosmic time and violent processes of spacetime dynamics. Promising candidates had been found based on optical and X-ray observations, which claims for new and ready-to-use GW detection approaches before the operations of space-borne antennas. We show that, satellite laser ranging (SLR) missions could serve as probes of coalescing SMBHBs through the GW-induced resonant effects. Lasting and characteristic imprints caused by such resonances in the residual distances or accelerations from SLR measurements are studied, and the detection SNR is analyzed with both the current and future improved ranging precisions. Within redshift $z \sim 1$, the threshold SNR=5 requires 1-2 years of accumulated data for the current precision and months of data for improved precision, which are workable for the data processing of SLR missions. Meanwhile, joint detections with multiple SLR missions could further improve the total SNR and the confidence level. Such a detection scheme could fulfill the requirement of a tentative SMBHB probe during the preparing stage of LISA and Taiji, and it requires no further investment to any new and advanced facilities. It is also worthwhile to look back and re-process the archived data from the past decades, in where resonant signals from SMBHBs might be hidden. △ Less

Submitted 2 July, 2023; v1 submitted 3 July, 2022; originally announced July 2022.

Comments: 12 pages, 10 figures

Journal ref: Eur. Phys. J. C, 83:554, (2023)

Suppressing data anomalies of gravitational reference sensors with time delay interferometry combinations

Authors: Pengzhan Wu, Minghui Du, Peng Xu

Abstract: For the LISA and Taiji missions, both transient and continuous data anomalies would pose significant challenges to the detection, estimation, and subsequent scientific interpretation of gravitational wave signals. As is indicated by the experiences of LISA PathFinder and Taiji-1, these anomalies may originate from the disturbances of the gravitational reference sensors due to routine maintenances… ▽ More For the LISA and Taiji missions, both transient and continuous data anomalies would pose significant challenges to the detection, estimation, and subsequent scientific interpretation of gravitational wave signals. As is indicated by the experiences of LISA PathFinder and Taiji-1, these anomalies may originate from the disturbances of the gravitational reference sensors due to routine maintenances and unexpected environmental or instrumental issues. To effectively mitigate such anomalies and thereby enhance the robustness and reliability of the scientific outputs, we suggest to employ the ``position noise suppressing'' time delay interferometry channels. Through analytical derivations and numerical simulations, we demonstrate that these time delay interferometry channels can suppress data anomalies by more than 2 orders of magnitude within the sensitive band of 0.1 mHz - 0.05 Hz, while still remaining sensitive to most of the target signals. Compared with existing researches that focus on reconstructing and subtracting data anomalies, our method does not rely on the prior knowledge about the models of anomalies. Furthermore, the potential application scenarios of these channels have also been explored. △ Less

Submitted 10 November, 2024; v1 submitted 21 June, 2022; originally announced June 2022.

Comments: 15 pages, 6 figures

Journal ref: Published in Optics Express (November 2024)

Removing proteins or bacteria on a tilted surface using air bubbles

Authors: Alireza Hooshanginejad, Timothy Sheppard, Purui Xu, Janeth Manyalla, John Jaicks, Ehsan Esmaili, Sunghwan Jung

Abstract: Cleaning surfaces with bubbles has been a topic of discussion in recent years due to the growing interest in sustainable methods for cleaning. Specifically, a method of using air bubbles to sanitize agricultural produce has been proposed as an eco-friendly alternative to current methods. In this study, we conduct experiments to test the cleaning efficacy at different angles of inclination of a con… ▽ More Cleaning surfaces with bubbles has been a topic of discussion in recent years due to the growing interest in sustainable methods for cleaning. Specifically, a method of using air bubbles to sanitize agricultural produce has been proposed as an eco-friendly alternative to current methods. In this study, we conduct experiments to test the cleaning efficacy at different angles of inclination of a contaminated surface. We use two different types of surface coated with either a protein solution or a bacterial biofilm. Our experimental results indicate that bubbles exhibit the best cleaning efficacy at the surface angle of $θ\approx 20^{\rm{o}}$ for polydisperse bubbles in the range of 0.3-2 mm and with an average radius of 0.6 mm in radius. To gain a better understanding of the underlying mechanism, we perform a numerical analysis of a single air bubble impacting surfaces with different angles. Our numerical and theoretical results show that the shear stress, which is proportional to the sliding speed but inversely proportional to the thickness of the film, results in the maximum shear force occurring at $θ\approx22^{\rm{o}} \approx π/8$ which agrees well with the experiments. △ Less

Submitted 7 June, 2022; originally announced June 2022.

Global Gravity Field Model from Taiji-1 Observations

Authors: Liming Wu, Peng Xu, Shuhong Zhao, Li-E Qiang, Ziren Luo, Yueliang Wu

Abstract: Taiji-1 is the first technology demonstration satellite of the Taiji program of China's space-borne gravitational wave antenna. After the demonstration of the key individual technologies, Taiji-1 continues collecting the data of the precision orbit determinations, satellite attitudes, and non-conservative forces exerted on the S/C. Therefore, during its free-fall, Taiji-1 can be viewed as operatin… ▽ More Taiji-1 is the first technology demonstration satellite of the Taiji program of China's space-borne gravitational wave antenna. After the demonstration of the key individual technologies, Taiji-1 continues collecting the data of the precision orbit determinations, satellite attitudes, and non-conservative forces exerted on the S/C. Therefore, during its free-fall, Taiji-1 can be viewed as operating in the high-low satellite-to-satellite tracking mode of a gravity recovery mission. In this work, we have selected and analyzed the one month data from Taiji-1's observations, and developed the techniques to resolve the long term interruptions and disturbances in the data due to the scheduled technology demonstration experiments. The first global gravity model \texttt{TJGM-r1911}, that independently derived from China's own satellite mission, is successfully built from Taiji-1's observations. Compared with gravity models from CHAMP and other satellite gravity missions, the accuracy discrepancies exist, which is mainly caused by the data discontinuity problem. As the extended free-falling phase been approved, Taiji-1 could serve as a gravity recovery mission for China since 2022 and it will provide us the independent measurement of both the static and the monthly time-variable global gravity field. △ Less

Submitted 17 August, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: 17 pages, 15 figures

Journal ref: Microgravity Science and Technology 34:77 (2022)

Broadband nonvolatile electrically programmable silicon photonic switches

Authors: Rui Chen, Zhuoran Fang, Johannes E. Fröch, Peipeng Xu, Jiajiu Zheng, Arka Majumdar

Abstract: Programmable photonic integrated circuits (PICs) have recently gained significant interest due to their potential in creating next-generation technologies ranging from artificial neural networks and microwave photonics to quantum information processing. The fundamental building block of such programmable PICs is a tunable 2 x 2 switch, traditionally controlled by the thermo-optic or free-carrier d… ▽ More Programmable photonic integrated circuits (PICs) have recently gained significant interest due to their potential in creating next-generation technologies ranging from artificial neural networks and microwave photonics to quantum information processing. The fundamental building block of such programmable PICs is a tunable 2 x 2 switch, traditionally controlled by the thermo-optic or free-carrier dispersion. Yet, these implementations are power-hungry, volatile, and have a large footprint (typically > 100 um). Therefore, a truly 'set-and-forget' type 2 x 2 switch with zero static power consumption is highly desirable for large-scale PICs. Here, we report a broadband nonvolatile electrically programmable 2 x 2 silicon photonic switch based on the phase-change material Ge2Sb2Te5. The directional coupler switch exhibits a compact coupling length (64 um), small insertion loss (<2 dB), and minimal crosstalk (<-8 dB) across the entire telecommunication C-band while maintaining a record-high endurance of over 2,800 switching cycles. This demonstrated switch constitutes a critical component for realizing future generic programmable silicon photonic systems. △ Less

Submitted 13 January, 2022; originally announced January 2022.

Tunable partial polarization beam splitter and optomechanically induced Faraday effect

Authors: Xuan Mao, Guo-Qing Qin, Hong Yang, Zeguo Wang, Min Wang, Gui-Qin Li, Peng Xue, Gui-Lu Long

Abstract: Polarization beam splitter (PBS) is a crucial photonic element to separately extract transverse-electric (TE) and transverse-magnetic (TM) polarizations from the propagating light fields. Here, we propose a concise, continuously tunable and all-optical partial PBS in the vector optomechanical system which contains two orthogonal polarized cavity modes with degenerate frequency. The results show th… ▽ More Polarization beam splitter (PBS) is a crucial photonic element to separately extract transverse-electric (TE) and transverse-magnetic (TM) polarizations from the propagating light fields. Here, we propose a concise, continuously tunable and all-optical partial PBS in the vector optomechanical system which contains two orthogonal polarized cavity modes with degenerate frequency. The results show that one can manipulate the polarization states of different output fields by tuning the polarization angle of the pumping field and the system function as partial PBS when the pump laser polarizes vertically or horizontally. As a significant application of the tunable PBS, we propose a scheme of implementing quantum walks in resonator arrays without the aid of other auxiliary systems. Furthermore, we investigate the optomechanically induced Faraday effect in the vector optomechanical system which enables arbitrary tailoring of the input lights and the behaviors of polarization angles of the output fields in the under couple, critical couple, and over couple regimes. Our findings prove the optomechanical system is a potential platform to manipulate the polarization states in multimode resonators and boost the process of applications related to polarization modulation. △ Less

Submitted 20 December, 2021; originally announced December 2021.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev. A 105, 033526 (2022)

The Design and Performance of Charged Particle Detector onboard the GECAM Mission

Authors: Y. B. Xu, X. L. Sun, S. Yang, X. Q. Li, W. X. Peng, K. Gong, X. H. Liang, Y. Q. Liu, D. Y. Guo, H. Wang, C. Y. Li, Z. H. An, J. J. He, X. J. Liu, S. L. Xiong, X. Y. Wen, Fan Zhang, D. L. Zhang, X. Y. Zhao, C. Y. Zhang, C. Cai, Z. Chang, G. Chen, C. Chen, Y. Y. Du , et al. (25 additional authors not shown)

Abstract: The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is us… ▽ More The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is used to measure charged particles in the space environment, monitor energy and flow intensity changes, and identify between gamma-ray bursts and space charged particle events in conjunction with GRD. CPD uses plastic scintillator as the sensitive material for detection, silicon photomultiplier (SiPM) array as the optically readable device, and the inlaid Am-241 radioactive source as the onboard calibration means. In this paper, we will present the working principle, physical design, functional implementation and preliminary performance test results of the CPD. △ Less

Submitted 9 December, 2021; originally announced December 2021.

Comments: accepted to RDTM

Inflight performance of the GECAM Gamma-ray and Charge particle Detectors

Authors: X. Q. Li, X. Y. Wen, S. L. Xiong, K. Gong, D. L. Zhang, Z. H. An, Y. B. Xu, Y. Q. Liu, C. Cai, Z. Chang, G. Chen, C. Chen, Y. Y. Du, M. Gao, R. Gao, D. Y. Guo, J. J. He, D. J. Hou, Y. G. Li, C. Li, C. Y. Li, G. Li, L. Li, Q. X. Li, X. F. Li , et al. (34 additional authors not shown)

Abstract: The GECAM mission consists of two identical microsatellites (GECAM-A and GECAM-B). Each satellite is equipped with 25 gamma-ray detectors (GRD) and 8 charged particle detectors (CPD). The main scientific objective of the GECAM mission is to detect gamma-ray bursts (GRBs) associated with the gravitational wave events produced by the merging of binary compact stars. After the launch on Dec. 10, 2020… ▽ More The GECAM mission consists of two identical microsatellites (GECAM-A and GECAM-B). Each satellite is equipped with 25 gamma-ray detectors (GRD) and 8 charged particle detectors (CPD). The main scientific objective of the GECAM mission is to detect gamma-ray bursts (GRBs) associated with the gravitational wave events produced by the merging of binary compact stars. After the launch on Dec. 10, 2020 , we carried out a series of on orbit tests. This paper introduces the test results of the GECAM-B satellite. According to the in-flight performance, the energy band for gamma-ray detection of GECAM-B is from about 7 keV to 3.5 MeV. GECAM-B can achieve prompt localization of GRBs. For the first time, GECAM-B realized a quasi-real-time transmission of trigger information using Beidou-3 RDSS. Keywords GECAM, gamma-ray burst, gravitational wave, GRD, CPD △ Less

Submitted 9 December, 2021; originally announced December 2021.

Comments: 16 pages, 8 figures