Showing 1–50 of 644 results for author: Wu, Y

Accelerating Fermionic System Simulation on Quantum Computers

Authors: Qing-Song Li, Jiaxuan Zhang, Huan-Yu Liu, Qingchun Wang, Yu-Chun Wu, Guo-Ping Guo

Abstract: A potential approach for demonstrating quantum advantage is using quantum computers to simulate fermionic systems. Quantum algorithms for fermionic system simulation usually involve the Hamiltonian evolution and measurements. However, in the second quantization representation, the number of terms in many fermion-system Hamiltonians, such as molecular Hamiltonians, is substantial, approximately… ▽ More A potential approach for demonstrating quantum advantage is using quantum computers to simulate fermionic systems. Quantum algorithms for fermionic system simulation usually involve the Hamiltonian evolution and measurements. However, in the second quantization representation, the number of terms in many fermion-system Hamiltonians, such as molecular Hamiltonians, is substantial, approximately $\mathcal{O}(N^4)$, where $N$ is the number of molecular orbitals. Due to this, the computational resources required for Hamiltonian evolution and expectation value measurements could be excessively large. To address this, we introduce a grouping strategy that partitions these $\mathcal{O}(N^4)$ Hamiltonian terms into $\mathcal{O}(N^2)$ groups, with the terms in each group mutually commuting. Based on this grouping method, we propose a parallel Hamiltonian evolution scheme that reduces the circuit depth of Hamiltonian evolution by a factor of $N$. Moreover, our grouping measurement strategy reduces the number of measurements needed to $\mathcal{O}(N^2)$, whereas the current best grouping measurement schemes require $\mathcal{O}(N^3)$ measurements. Additionally, we find that measuring the expectation value of a group of Hamiltonian terms requires fewer repetitions than measuring a single term individually, thereby reducing the number of quantum circuit executions. Our approach saves a factor of $N^3$ in the overall time for Hamiltonian evolution and measurements, significantly decreasing the time required for quantum computers to simulate fermionic systems. △ Less

Submitted 12 May, 2025; originally announced May 2025.

Comments: 15 pages, 7 figures

Journal ref: Phys. Rev. A 111, 052606 (2025)

Stable self-charged perovskite quantum rods for liquid laser with near-zero threshold

Authors: Jialu Li, Xue Han, Wenjie Wang, Jinhui Wang, Tingting Zhang, Yuting Wu, Guofeng Zhang, Bin Li, Changgang Yang, Wenli Guo, Mi Zhang, Ruiyun Chen, Chengbing Qin, Jianyong Hu, Zhichun Yang, Shaoding Liu, Yue Wang, Yunan Gao, Jie Ma, Liantuan Xiao, Suotang Jia

Abstract: Colloidal quantum dots (QDs) are promising optical gain materials that require further threshold reduction to realize their full potential. While QD charging theoretically reduces the threshold to zero, its effectiveness has been limited by strong Auger recombination and unstable charging. Here we theoretically reveal the optimal combination of charging number and Auger recombination to minimize t… ▽ More Colloidal quantum dots (QDs) are promising optical gain materials that require further threshold reduction to realize their full potential. While QD charging theoretically reduces the threshold to zero, its effectiveness has been limited by strong Auger recombination and unstable charging. Here we theoretically reveal the optimal combination of charging number and Auger recombination to minimize the lasing threshold. Experimentally, we develop stable self-charged perovskite quantum rods (QRs) as an alternative to QDs via state engineering and Mn-doping strategy. An unprecedented two-order-of-magnitude reduction in nonradiative Auger recombination enables QRs to support a sufficient charging number of up to 6. The QR liquid lasing is then achieved with a near-zero threshold of 0.098 using quasi-continuous pumping of nanosecond pulses, which is the lowest threshold among all reported QD lasers. These achievements demonstrate the potential of the specially engineered QRs as an excellent gain media and pave the way for their prospective applications. △ Less

Submitted 1 May, 2025; originally announced May 2025.

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

The Muon Collider

Authors: Carlotta Accettura, Simon Adrian, Rohit Agarwal, Claudia Ahdida, Chiara Aime', Avni Aksoy, Gian Luigi Alberghi, Siobhan Alden, Luca Alfonso, Muhammad Ali, Anna Rita Altamura, Nicola Amapane, Kathleen Amm, David Amorim, Paolo Andreetto, Fabio Anulli, Ludovica Aperio Bella, Rob Appleby, Artur Apresyan, Pouya Asadi, Mohammed Attia Mahmoud, Bernhard Auchmann, John Back, Anthony Badea, Kyu Jung Bae , et al. (433 additional authors not shown)

Abstract: Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an… ▽ More Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an electron-positron collider, yielding a physics potential significantly greater than the sum of its individual parts. A high-energy muon collider is the natural next step in the exploration of fundamental physics after the HL-LHC and a natural complement to a future low-energy Higgs factory. Such a facility would significantly broaden the scope of particle colliders, engaging the many frontiers of the high energy community. The last European Strategy for Particle Physics Update and later the Particle Physics Project Prioritisation Panel in the US requested a study of the muon collider, which is being carried on by the International Muon Collider Collaboration. In this comprehensive document we present the physics case, the state of the work on accelerator design and technology, and propose an R\&D project that can make the muon collider a reality. △ Less

Submitted 30 April, 2025; originally announced April 2025.

Comments: 406 pages, supplementary report to the European Strategy for Particle Physics - 2026 update

Induced Diffusion of Internal Gravity Waves: Directionality and Role in Ocean Mixing

Authors: Yue Wu, Yulin Pan

Abstract: Induced diffusion (ID), an important mechanism of spectral energy transfer in the internal gravity wave (IGW) field, plays a significant role in driving turbulent dissipation in the ocean interior. In this study, we revisit the ID mechanism to elucidate its directionality and role in ocean mixing under varying IGW spectral forms, with particular attention to deviations from the standard Garrett-Mu… ▽ More Induced diffusion (ID), an important mechanism of spectral energy transfer in the internal gravity wave (IGW) field, plays a significant role in driving turbulent dissipation in the ocean interior. In this study, we revisit the ID mechanism to elucidate its directionality and role in ocean mixing under varying IGW spectral forms, with particular attention to deviations from the standard Garrett-Munk (GM) spectrum. The original interpretation of ID as an action diffusion process, as proposed by McComas et al., suggests that ID is inherently bidirectional, with its direction governed by the vertical-wavenumber spectral slope $σ$ of the IGW action spectrum, $n \propto m^σ$. In contrast, by evaluating the wave kinetic equation, we reveal a more complete depiction of ID, comprising both diffusive and scale-separated transfers that are rooted in energy conservation within wave triads. Although the action diffusion may reverse direction depending on the sign of $σ$ (i.e., between red and blue spectral cases), the combined ID transfer consistently leads to a forward energy cascade at the dissipation scale, thereby contributing positively to turbulent dissipation. This supports the viewpoint of ID as a dissipative mechanism in physical oceanography. This study presents a physically grounded overview of ID and offers insights into the specific types of wave-wave interactions responsible for turbulent dissipation. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Engineering Graphene Nanoribbons via Periodically Embedding Oxygen Atoms

Authors: Yan Zhao, Li-Xia Kang, Yi-Jun Wang, Yi Wu, Guang-Yan Xing, Shi-Wen Li, Jinliang Pan, Nie-Wei Wang, Yin-Ti Ren, Ying Wang, Ya-Cheng Zhu, Xing-Qiang Shi, Mengxi Liu, Xiaohui Qiu, Pei-Nian Liu, Deng-Yuan Li

Abstract: Heteroatom doping is an important method for engineering graphene nanoribbons (GNRs) because of its ability to modify electronic properties by introducing extra electrons or vacancies. However, precisely integrating oxygen atoms into the lattice of GNRs is unexplored, and the resulting electronic properties remain elusive. Here, we achieve the precise embedding of oxygen atoms into the lattice of… ▽ More Heteroatom doping is an important method for engineering graphene nanoribbons (GNRs) because of its ability to modify electronic properties by introducing extra electrons or vacancies. However, precisely integrating oxygen atoms into the lattice of GNRs is unexplored, and the resulting electronic properties remain elusive. Here, we achieve the precise embedding of oxygen atoms into the lattice of GNRs via in situ formation of pyrans, synthesizing two types of oxygen-doped GNRs (O-doped chevron-GNR and O-doped chiral (2,1)-GNR). Using scanning tunneling microscopy, non-contact atomic force microscopy, and density functional theory calculations, the atomic structures and electronic properties of O-doped GNRs are determined, demonstrating that both GNRs are direct bandgap semiconductors with different sensitivities to oxygen dopants. Oxygen dopants have a minor impact on the bandgap of chevron-GNR but a significant effect on the bandgap of chiral (2,1)-GNR, which is attributed to the difference in density of states near the Fermi level between substituted intrinsic carbon atoms and their pristine counterparts. Compared with the pristine chiral (2,1)-GNR, the band structure of O-doped chiral (2,1)-GNR exhibits unexpected band edges transition, which is ascribed to sp2-hybridized oxygen atoms which introduces additional electrons to the conduction band of chiral (2,1)-GNR, leading to the upward shift of Fermi surface. △ Less

Submitted 25 April, 2025; originally announced April 2025.

Evidence of Ultrashort Orbital Transport in Heavy Metals Revealed by Terahertz Emission Spectroscopy

Authors: Tongyang Guan, Jiahao Liu, Wentao Qin, Yongwei Cui, Shunjia Wang, Yizheng Wu, Zhensheng Tao

Abstract: The orbital angular momentum of electrons offers a promising, yet largely unexplored, degree of freedom for ultrafast, energy-efficient information processing. As the foundation of orbitronics, understanding how orbital currents propagate and convert into charge currents is essential - but remains elusive due to the challenge in disentangling orbital and spin dynamics in ultrathin films. Although… ▽ More The orbital angular momentum of electrons offers a promising, yet largely unexplored, degree of freedom for ultrafast, energy-efficient information processing. As the foundation of orbitronics, understanding how orbital currents propagate and convert into charge currents is essential - but remains elusive due to the challenge in disentangling orbital and spin dynamics in ultrathin films. Although orbital currents have been predicted to propagate over long distances in materials, recent theoretical studies argue that lattice symmetry may constrain their mean free paths (MFPs) to the scale of a single atomic layer. In this work, we provide the first direct experimental evidence for ultrashort orbital MFPs in heavy metals (HMs) - W, Ta, Pt - revealed by femtosecond terahertz emission spectroscopy. This is enabled by sub-nanometer-precision control of thin-film thickness using wedge-shaped HM|Ni heterostructures. By employing a multi-component terahertz-emission model, we quantitatively extract the orbital MFPs, consistently finding them shorter than their spin counterparts. Furthermore, control experiments rule out interfacial orbital-to-charge conversion as the dominant mechanism, confirming that the process is governed by the bulk inverse orbital Hall effect. Our findings resolve a central controversy in orbitronics and provide key insights into orbital transport and conversion mechanisms. △ Less

Submitted 24 April, 2025; v1 submitted 21 April, 2025; originally announced April 2025.

Three-dimensional neural network driving self-interference digital holography enables high-fidelity, non-scanning volumetric fluorescence microscopy

Authors: Tianlong Man, Yuwen Zhang, Yuchen Wu, Zhiqing Zhang, Hongqiang Zhou, Liyun Zhong, Yuhong Wan

Abstract: We present a deep learning driven computational approach to overcome the limitations of self-interference digital holography that imposed by inferior axial imaging performances. We demonstrate a 3D deep neural network model can simultaneously suppresses the defocus noise and improves the spatial resolution and signal-to-noise ratio of conventional numerical back-propagation-obtained holographic re… ▽ More We present a deep learning driven computational approach to overcome the limitations of self-interference digital holography that imposed by inferior axial imaging performances. We demonstrate a 3D deep neural network model can simultaneously suppresses the defocus noise and improves the spatial resolution and signal-to-noise ratio of conventional numerical back-propagation-obtained holographic reconstruction. Compared with existing 2D deep neural networks used for hologram reconstruction, our 3D model exhibits superior performance in enhancing the resolutions along all the three spatial dimensions. As the result, 3D non-scanning volumetric fluorescence microscopy can be achieved, using 2D self-interference hologram as input, without any mechanical and opto-electronic scanning and complicated system calibration. Our method offers a high spatiotemporal resolution 3D imaging approach which can potentially benefit, for example, the visualization of dynamics of cellular structure and measurement of 3D behavior of high-speed flow field. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Stability analysis of discrete Boltzmann simulation for supersonic flows: Influencing factors, coupling mechanisms and optimization strategies

Authors: Yanhong Wu, Yanbiao Gan, Aiguo Xu, Bin Yang

Abstract: Supersonic flow simulations face challenges in trans-scale modeling, numerical stability, and complex field analysis due to inherent nonlinear, nonequilibrium, and multiscale characteristics. The discrete Boltzmann method (DBM) provides a multiscale kinetic modeling framework and analysis tool to capture complex discrete/nonequilibrium effects. While the numerical scheme plays a fundamental role i… ▽ More Supersonic flow simulations face challenges in trans-scale modeling, numerical stability, and complex field analysis due to inherent nonlinear, nonequilibrium, and multiscale characteristics. The discrete Boltzmann method (DBM) provides a multiscale kinetic modeling framework and analysis tool to capture complex discrete/nonequilibrium effects. While the numerical scheme plays a fundamental role in DBM simulations, a comprehensive stability analysis remains lacking. Similar to LBM, the complexity mainly arises from the intrinsic coupling between velocity and spatiotemporal discretizations, compared with CFD. This study applies von Neumann stability analysis to investigate key factors influencing DBM simulation stability, including phase-space discretization, thermodynamic nonequilibrium (TNE) levels, spatiotemporal schemes, initial conditions, and model parameters. Key findings include: (i) the moment-matching approach outperforms expansion- and weighting-based methods in the test simulations; (ii) increased TNE enhances system nonlinearity and the intrinsic nonlinearity embedded in the model equations, amplifying instabilities; (iii) additional viscous dissipation based on distribution functions improves stability but distorts flow fields and alters constitutive relations; (iv) larger CFL numbers and relative time steps degrade stability, necessitating appropriate time-stepping strategies. To assess the stability regulation capability of DBMs across TNE levels, stability-phase diagrams and probability curves are constructed via morphological analysis within the moment-matching framework. These diagrams identify common stable parameter regions across model orders. This study reveals key factors and coupling mechanisms affecting DBM stability and proposes strategies for optimizing equilibrium distribution discretization, velocity design, and parameter selection in supersonic regimes. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Comments: 34 pages, 20 figures

Constraints on dark matter boosted by supernova shock within the effective field theory framework from the CDEX-10 experiment

Authors: J. Z. Wang, L. T. Yang, Q. Yue, K. J. Kang, Y. J. Li, H. P. An, Greeshma C., J. P. Chang, H. Chen, Y. H. Chen, J. P. Cheng, W. H. Dai, Z. Deng, C. H. Fang, X. P. Geng, H. Gong, Q. J. Guo, T. Guo, X. Y. Guo, L. He, J. R. He, H. X. Huang, T. C. Huang, S. Karmakar, H. B. Li , et al. (62 additional authors not shown)

Abstract: Supernova shocks can boost dark matter (DM) particles to high, yet nonrelativistic, velocities, providing a suitable mechanism for analysis within the framework of the nonrelativistic effective field theory (NREFT). These accelerated DM sources extend the experimental ability to scan the parameter space of light DM into the sub-GeV region. In this study, we specifically analyze DM accelerated by t… ▽ More Supernova shocks can boost dark matter (DM) particles to high, yet nonrelativistic, velocities, providing a suitable mechanism for analysis within the framework of the nonrelativistic effective field theory (NREFT). These accelerated DM sources extend the experimental ability to scan the parameter space of light DM into the sub-GeV region. In this study, we specifically analyze DM accelerated by the Monogem Ring supernova remnant, whose age ($\sim 68000$ yr) and distance to Earth ($\sim 300$ parsecs) are strategically matched to enable detection with current terrestrial detectors. Utilizing the 205.4 kg$\cdot$day data obtained from the CDEX-10 experiment at the China Jinping Underground Laboratory (CJPL), we derive new constraints on boosted DM within the NREFT framework. The NREFT coupling constant exclusion regions now penetrate the sub-GeV mass range, with optimal sensitivity achieved for operators $\mathcal{O}_{3}$, $\mathcal{O}_{6}$, $\mathcal{O}_{15}$ in the 0.4--0.6 GeV mass range. △ Less

Submitted 4 April, 2025; originally announced April 2025.

Comments: 9 pages, 5 figures

Evaluating Electric Micro-Mobility Related Mode Choice Stated Preferences: A Latent Class Choice Approach

Authors: Yikang Wu, Mehmet Yildirimoglu, Zuduo Zheng

Abstract: This paper examines mode choice behaviour regarding Electric Micro-Mobility (EMM) among car and public transport users using a Latent Class Choice Modelling (LCCM) approach. Utilizing stated preference survey data from 1,671 Brisbane residents, the study identifies distinct user segments with heterogeneous sensitivities to EMM attributes. Results reveal significant potential for EMM adoption, nota… ▽ More This paper examines mode choice behaviour regarding Electric Micro-Mobility (EMM) among car and public transport users using a Latent Class Choice Modelling (LCCM) approach. Utilizing stated preference survey data from 1,671 Brisbane residents, the study identifies distinct user segments with heterogeneous sensitivities to EMM attributes. Results reveal significant potential for EMM adoption, notably among segments inclined toward multimodal trips or personal micromobility, driven primarily by weather conditions, travel time, and cost. Conversely, resistant segments characterized by demographic factors such as age, gender, income, and lack of EMM experience highlight challenges in shifting mode choices. Further analyses, including class profiles, elasticities, and geographical distribution, are conducted to generate comprehensive insights that inform policy decisions. These insights support targeted investments in micromobility infrastructure and integrated pricing strategies, thereby enhancing EMM adoption and promoting sustainable urban mobility. △ Less

Submitted 1 April, 2025; originally announced April 2025.

Comments: 28 pages, 15 figures

Towards a multi-dimensional picture of classical nucleation: The example of liquid condensation through theory and rare event sampling

Authors: Yijian Wu, Thomas Philippe, Aymane Graini, Julien Lam

Abstract: While very popular for its ability to provide an elegant conceptual framework, classical nucleation theory (CNT) still fails at quantitatively reproducing most of the experimental and numerical observations of first order transitions. In this paper, we extend CNT by explicitly incorporating the multi-dimensional aspect of nucleation. Focusing on the liquid condensation of a Lennard-Jones gas, we u… ▽ More While very popular for its ability to provide an elegant conceptual framework, classical nucleation theory (CNT) still fails at quantitatively reproducing most of the experimental and numerical observations of first order transitions. In this paper, we extend CNT by explicitly incorporating the multi-dimensional aspect of nucleation. Focusing on the liquid condensation of a Lennard-Jones gas, we used state of the art rare event sampling simulations to precisely characterize the nucleation event insisting on the specific features of the critical cluster. Our numerical results indicate a simultaneous growth and densification in liquid condensation. We then exploit these insights to develop a 2-variable nucleation theory. Our model based on the capillary approximation is able to quantitatively retrieve the numerical results in nucleation rate and critical cluster properties. Furthermore, our model provides a qualitatively more accurate representation of nucleation near the spinodal regime. The effectiveness of this integrated numerical and theoretical framework highlights the limitations of CNT and more recent theories while offering a robust foundation for its refinement. △ Less

Submitted 25 March, 2025; originally announced March 2025.

Comments: 10 pages, 4 figures

Temperature-Dependent Calibration Procedures for the Silicon Photomultiplier Readout of the Cosmic Ray Veto Detector for the Mu2e Experiment

Authors: Lincoln Curtis, E. Craig Dukes, Ralf Ehrlich, Josh Greaves, Craig Group, Karl Hardrick, Tyler Horoho, Yuri Oksuzian, Paul Rubinov, Matthew Solt, Yongyi Wu, Anran Zhao

Abstract: The cosmic ray veto detector for the Mu2e experiment consists of scintillation bars embedded with wavelength-shifting fibers and read out by silicon photomultipliers (SiPMs). In this manuscript the calibration procedures of the SiPMs are described including corrections for the temperature dependence of their light yield. These corrections are needed as the SiPMs are not kept at a constant temperat… ▽ More The cosmic ray veto detector for the Mu2e experiment consists of scintillation bars embedded with wavelength-shifting fibers and read out by silicon photomultipliers (SiPMs). In this manuscript the calibration procedures of the SiPMs are described including corrections for the temperature dependence of their light yield. These corrections are needed as the SiPMs are not kept at a constant temperature due to the complexity and cost of implementing a cooling system on such a large detector. Rather, it was decided to monitor the temperature to allow the appropriate corrections to be made. The SiPM temperature dependence has been measured in a dedicated experiment and the calibration procedures were validated with data from production detectors awaiting installation at Fermilab. △ Less

Submitted 21 March, 2025; originally announced March 2025.

Report number: FERMILAB-PUB-24-0973-PPD

2D Spintronics for Neuromorphic Computing with Scalability and Energy Efficiency

Authors: Douglas Z. Plummer, Emily D'Alessandro, Aidan Burrowes, Joshua Fleischer, Alexander M. Heard, Yingying Wu

Abstract: The demand for computing power has been growing exponentially with the rise of artificial intelligence (AI), machine learning, and the Internet of Things (IoT). This growth requires unconventional computing primitives that prioritize energy efficiency, while also addressing the critical need for scalability. Neuromorphic computing, inspired by the biological brain, offers a transformative paradigm… ▽ More The demand for computing power has been growing exponentially with the rise of artificial intelligence (AI), machine learning, and the Internet of Things (IoT). This growth requires unconventional computing primitives that prioritize energy efficiency, while also addressing the critical need for scalability. Neuromorphic computing, inspired by the biological brain, offers a transformative paradigm for addressing these challenges. This review paper provides an overview of advancements in 2D spintronics and device architectures designed for neuromorphic applications, with a focus on techniques such as spin-orbit torque, magnetic tunnel junctions, and skyrmions. Emerging van der Waals materials like CrI3, Fe3GaTe2, and graphene-based heterostructures have demonstrated unparalleled potential for integrating memory and logic at the atomic scale. This work highlights technologies with ultra-low energy consumption (0.14 fJ/operation), high switching speeds (sub-nanosecond), and scalability to sub-20 nm footprints. It covers key material innovations and the role of spintronic effects in enabling compact, energy-efficient neuromorphic systems, providing a foundation for advancing scalable, next-generation computing architectures. △ Less

Submitted 13 March, 2025; originally announced March 2025.

Comments: 30 pages, 4 figures

Impact of network connectivity on the dynamics of populations in stream environments

Authors: Tung D. Nguyen, Tingting Tang, Amy Veprauskas, Yixiang Wu, Ying Zhou

Abstract: We consider the impact of network connectivity on the dynamics of a population in a stream environment. The population is modeled using a graph theoretical framework, with habitats represented by isolated patches. We introduce a change in connectivity into the model through the addition of a bi-directional or one-directional edge between two patches and examine the impact of this edge modification… ▽ More We consider the impact of network connectivity on the dynamics of a population in a stream environment. The population is modeled using a graph theoretical framework, with habitats represented by isolated patches. We introduce a change in connectivity into the model through the addition of a bi-directional or one-directional edge between two patches and examine the impact of this edge modification on the metapopulation growth rate and the network biomass. Our main results indicate that adding a bi-directional edge often decreases both measures, while the effect of adding an one-directional edge is more intricate and dependent on the model parameters. We establish complete analytical results for stream networks of three patches, and provide some generalizations and conjectures for more general stream networks of $n$ patches. These conjectures are supported with numerical simulations. △ Less

Submitted 17 March, 2025; originally announced March 2025.

MSC Class: 92D25; 92D40; 34C12; 34D23; 37C65

Are There High-Density Deep States in AtomicLayer-Deposited IGZO Thin Film?

Authors: Liankai Zheng, Lijuan Xing, Zhiyu Lin, Wanpeng Zhao, Yuyan Fan, Yulong Dong, Ziheng Wang, Siying Li, Xiuyan Li, Ying Wu, Jeffrey Xu, Mengwei Si

Abstract: It has been well recognized that there exist high-density deep states in IGZO thin films. Many of the device characteristics of IGZO transistors, such as negative bias illumination stability (NBIS),were understood to be related to these deep states. However, in this work, it is found that deep state density (NtD) of atomic-layer-deposited (ALD) IGZO transistors can be an ultra-low value (2.3*10^12… ▽ More It has been well recognized that there exist high-density deep states in IGZO thin films. Many of the device characteristics of IGZO transistors, such as negative bias illumination stability (NBIS),were understood to be related to these deep states. However, in this work, it is found that deep state density (NtD) of atomic-layer-deposited (ALD) IGZO transistors can be an ultra-low value (2.3*10^12 /cm^3) by the proposed NBIS-free light assisted I-V measurements so that the deep states do not affect the I-V characteristics even in subthreshold region. This work also reveals that NBIS is not related to the photoexcitation of electrons in deep states. Our results suggest that the existence of deep states and the impact of deep states on ALD IGZO transistors may need to be revisited. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Enabling Highly Efficient Infrared Silicon Photodetectors via Disordered Metasurfaces with Upconversion Nanoparticles

Authors: Wei Chen, Shutao Zhang, Chongwu Wang, Yiming Wu, Xiaodong Shi, Jiaqing Shen, Yan Liu, Xuran Zhang, Febiana Tjiptoharsono, Henry Yit Loong Lee, Di Zhu, Qijie Wang, Joel K. W. Yang, Jinfeng Zhu, Zhaogang Dong

Abstract: Silicon photodetectors are highly desirable for their CMOS compatibility, low cost, and fast response speed. However, their application the infrared (IR) is limited by silicon's intrinsic bandgap, which restricts its detection to photons with wavelengths shorter than 1100 nm. Although several methods have been developed to extend silicon photodetectors further in the IR range, these approaches oft… ▽ More Silicon photodetectors are highly desirable for their CMOS compatibility, low cost, and fast response speed. However, their application the infrared (IR) is limited by silicon's intrinsic bandgap, which restricts its detection to photons with wavelengths shorter than 1100 nm. Although several methods have been developed to extend silicon photodetectors further in the IR range, these approaches often introduce additional challenges, such as increased fabrication complexity and compatibility issues with standard CMOS processes. Here, we present an approach to overcome these limitations by integrating disordered metasurfaces with upconversion nanoparticles (UCNPs), enabling IR detection by silicon photodetectors. The disordered design consists of hybrid Mie-plasmonic cavities, which can enhance both the near-field localization and wide-band light absorption from visible to IR, improving photocurrent conversion. Compared to ordered structures, the infrared absorption and near field of the highly disordered configuration are increased by 2.6-folds and 3.9-folds, respectively. UCNPs not only convert near-infrared photons into visible light but also enhance absorption in the mid-infrared range, thereby improving hot electron generation. The measured responsivity of the disordered element for 1550 nm laser is up to 0.22 A/W at room temperature, corresponding to an external quantum efficiency of 17.6%. Our design not only enhances the photocurrent performance significantly, but also extends the working wavelength of silicon photodetectors to IR wavelength, making them suitable for broad spectrum applications. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Nanoscale positioning and in-situ enhancement of single G center in silicon using a fluorescence-localization technique

Authors: Yu-Hang Ma, Nai-Jie Guo, Wei Liu, Xiao-Dong Zeng, Lin-Ke Xie, Jun-You Liu, Ya-Qi Wu, Yi-Tao Wang, Zhao-An Wang, Jia-Ming Ren, Chun Ao, Haifei Lu, Jian-Shun Tang, Chuan-Feng Li, Guang-Can Guo

Abstract: Silicon-based semiconductor nanofabrication technology has achieved a remarkable level of sophistication and maturity, and color centers in silicon naturally inherit this advantage. Besides, their emissions appear in telecommunication bands, which makes them play a crucial role in the construction of quantum network. To address the challenge of weak spontaneous emission, different optical cavities… ▽ More Silicon-based semiconductor nanofabrication technology has achieved a remarkable level of sophistication and maturity, and color centers in silicon naturally inherit this advantage. Besides, their emissions appear in telecommunication bands, which makes them play a crucial role in the construction of quantum network. To address the challenge of weak spontaneous emission, different optical cavities are fabricated to enhance the emission rate. However, the relative location between cavity and emitter is random, which greatly reduce the success probability of enhancement. Here, we report on a fluorescence-localization technique (FLT) for precisely locating single G center in silicon and embedding it in the center of a circular Bragg grating cavity in situ, achieving 240-times improvement of the success probability. We observe a 30-fold enhancement in luminescence intensity, 2.5-fold acceleration of the emission from single G center, corresponding to a Purcell factor exceeding 11. Our findings pave the way for the large-scale integration of quantum light sources including those with spins. △ Less

Submitted 15 March, 2025; originally announced March 2025.

Nonreciprocal quantum photon-pair source with chiral ferroelectric nematics

Authors: Jin-Tao Pan, Yun-Kun Wu, Ling-Ling Ma, Ning Wang, Xin-Yu Tao, Bo-Han Zhu, Shu Wang, Fang-Wen Sun, Guang-Can Guo, Hui Jing, Xi-Feng Ren, Yan-Qing Lu

Abstract: Quantum nonreciprocity-a fundamental phenomenon enabling directional control of quantum states and photon correlations-has long been recognized as pivotal for quantum technologies. However, the experimental realization of nonreciprocal quantum photon-pair generation, as a critical prerequisite for advancing quantum systems, continues to be an outstanding challenge that remains unaddressed in pract… ▽ More Quantum nonreciprocity-a fundamental phenomenon enabling directional control of quantum states and photon correlations-has long been recognized as pivotal for quantum technologies. However, the experimental realization of nonreciprocal quantum photon-pair generation, as a critical prerequisite for advancing quantum systems, continues to be an outstanding challenge that remains unaddressed in practice. Here, we experimentally implement a highly-efficient nonreciprocal quantum photon source in a micro/nano-scale helical structured nonlinear optical fluid. Intriguing helical quasi-phase matching is achieved by deliberately engineering the pitch of the chiral ferroelectric structure, thus enabling spontaneous parametric down-conversion with record-high brightness (5,801.6 Hz*mW-1, 10,071% enhancement over phase-mismatched systems) and high coincidence-to-accidental ratio, rivaling state-of-the-art centimeter-scale nonlinear crystals. In particular, by tailoring the ferroelectric helix structure with orthogonally aligned head and tail polarization vectors, we demonstrate up to 22.6 dB isolation in biphoton generation coupled with nonreciprocal quantum polarization states, while maintaining classical optical reciprocity. This quantum liquid-crystal-based platform, combining flexible tunability and superior performance of purely quantum nonreciprocity at micro/nano scales, builds a bridge between a wide range of soft-matter systems, nonreciprocal physics, and emerging quantum photonic technologies. △ Less

Submitted 14 March, 2025; originally announced March 2025.

Comments: 13 pages,4 figures

Implementation of full-potential screened spherical wave based muffin-tin orbital for all-electron density functional theory

Authors: Aixia Zhang, Qingyun Zhang, Zhiyi Chen, Yong Wu, Youqi Ke

Abstract: Screened spherical wave (SSW) of the Hankel function features the complete, minimal and short-ranged basis set, presenting a compact representation for electronic systems. In this work, we report the implementation of full-potential (FP) SSW based tight-binding linearized Muffin-Tin orbital (TB-LMTO) for all-electron density functional theory (DFT), and provide extensive tests on the robustness of… ▽ More Screened spherical wave (SSW) of the Hankel function features the complete, minimal and short-ranged basis set, presenting a compact representation for electronic systems. In this work, we report the implementation of full-potential (FP) SSW based tight-binding linearized Muffin-Tin orbital (TB-LMTO) for all-electron density functional theory (DFT), and provide extensive tests on the robustness of FP-TB-LMTO and its high accuracy for first-principles material simulation. Through the introduction of double augmentation, SSW based MTO is accurately represented on the double grids including the full-space uniform and dense radial grids. Based on the the double augmentation, the accurate computation of full charge density, full potential,complex integral in the interstitial region and the total energy are all effectively addressed to realize the FP-TB-LMTO for DFT self-consistent calculations. By calculating the total energy,band structure, phase ordering, and elastic constants for a wide variety of materials, including normal metals, compounds, and diamond silicon, we domenstrate the highly accurate numerical implemetation of FP-TB-LMTO for all-electron DFT in comparison with other well-established FP method. The implementation of FP-TB-LMTO based DFT offers an important tool for the accurate first-principles tight-binding electronic structure calculations, particular important for the large-scale or strongly correlated materials. △ Less

Submitted 10 March, 2025; originally announced March 2025.

Is fitting error a reliable metric for assessing deformable motion correction in quantitative MRI?

Authors: Fanwen Wang, Ke Wen, Yaqing Luo, Yinzhe Wu, Jiahao Huang, Dudley J. Pennell, Pedro F. Ferreira, Andrew D. Scott, Sonia Nielles-Vallespin, Guang Yang

Abstract: Quantitative MR (qMR) can provide numerical values representing the physical and chemical properties of the tissues. To collect a series of frames under varying settings, retrospective motion correction is essential to align the corresponding anatomical points or features. Under the assumption that the misalignment makes the discrepancy between the corresponding features larger, fitting error is a… ▽ More Quantitative MR (qMR) can provide numerical values representing the physical and chemical properties of the tissues. To collect a series of frames under varying settings, retrospective motion correction is essential to align the corresponding anatomical points or features. Under the assumption that the misalignment makes the discrepancy between the corresponding features larger, fitting error is a commonly used evaluation metric for motion correction in qMR. This study evaluates the reliability of the fitting error metric in cardiac diffusion tensor imaging (cDTI) after deformable registration. We found that while fitting error correlates with the negative eigenvalues, the negative Jacobian Determinant increases with broken cardiomyocytes, indicated by helix angle gradient line profiles. Since fitting error measures the distance between moved points and their re-rendered counterparts, the fitting parameter itself may be adjusted due to poor registration. Therefore, fitting error in deformable registration itself is a necessary but not sufficient metric and should be combined with other metrics. △ Less

Submitted 10 March, 2025; originally announced March 2025.

Comments: 5 pages, 5 figures. Accepted by ISBI 2025

Coexisting Euler and Stiefel-Whitney Topological Phases in Elastic Metamaterials

Authors: Jijie Tang, Adrien Bouhon, Yue Shen, Kailun Wang, Junrong Feng, Feng Li, Di Zhou, Robert-Jan Slager, Ying Wu

Abstract: The study of topological band theory in classical structures has led to the development of novel topological metamaterials with intriguing properties. While single-gap topologies are well understood, recent novel multi-gap phases have garnished increasing interest. These novel phases are characterized by invariants, such as the Euler and second Stiefel-Whitney classes, which involve Bloch eigen-su… ▽ More The study of topological band theory in classical structures has led to the development of novel topological metamaterials with intriguing properties. While single-gap topologies are well understood, recent novel multi-gap phases have garnished increasing interest. These novel phases are characterized by invariants, such as the Euler and second Stiefel-Whitney classes, which involve Bloch eigen-subspaces of multiple bands and can change by braiding in momentum space non-Abelian charged band degeneracies belonging to adjacent energy gaps. Here, we theoretically predict and experimentally demonstrate that two of such topological phases can coexist within a single system using vectorial elastic waves. The inherent coupling between different polarization modes enables non-Abelian braiding of nodal points of multiple energy band gaps and results in coexisting Euler and Stiefel-Whitney topological insulator phases. We furthermore unveil the central role played by the topologically stable Goldstone modes' degeneracy. Our findings represent the first realization of hybrid phases in vectorial fields exhibiting topologically nontrivial Goldstone modes, paving the way for bifunctional applications that leverage the coexistence of topological edge and corner states. △ Less

Submitted 8 March, 2025; originally announced March 2025.

Deep Learning-Based Diffusion MRI Tractography: Integrating Spatial and Anatomical Information

Authors: Yiqiong Yang, Yitian Yuan, Baoxing Ren, Ye Wu, Yanqiu Feng, Xinyuan Zhang

Abstract: Diffusion MRI tractography technique enables non-invasive visualization of the white matter pathways in the brain. It plays a crucial role in neuroscience and clinical fields by facilitating the study of brain connectivity and neurological disorders. However, the accuracy of reconstructed tractograms has been a longstanding challenge. Recently, deep learning methods have been applied to improve tr… ▽ More Diffusion MRI tractography technique enables non-invasive visualization of the white matter pathways in the brain. It plays a crucial role in neuroscience and clinical fields by facilitating the study of brain connectivity and neurological disorders. However, the accuracy of reconstructed tractograms has been a longstanding challenge. Recently, deep learning methods have been applied to improve tractograms for better white matter coverage, but often comes at the expense of generating excessive false-positive connections. This is largely due to their reliance on local information to predict long range streamlines. To improve the accuracy of streamline propagation predictions, we introduce a novel deep learning framework that integrates image-domain spatial information and anatomical information along tracts, with the former extracted through convolutional layers and the later modeled via a Transformer-decoder. Additionally, we employ a weighted loss function to address fiber class imbalance encountered during training. We evaluate the proposed method on the simulated ISMRM 2015 Tractography Challenge dataset, achieving a valid streamline rate of 66.2%, white matter coverage of 63.8%, and successfully reconstructing 24 out of 25 bundles. Furthermore, on the multi-site Tractoinferno dataset, the proposed method demonstrates its ability to handle various diffusion MRI acquisition schemes, achieving a 5.7% increase in white matter coverage and a 4.1% decrease in overreach compared to RNN-based methods. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Simulation of the Background from $^{13}$C$(α, n)^{16}$O Reaction in the JUNO Scintillator

Authors: JUNO Collaboration, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Costas Andreopoulos, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Beretta, Antonio Bergnoli, Nikita Bessonov, Daniel Bick, Lukas Bieger, Svetlana Biktemerova , et al. (608 additional authors not shown)

Abstract: Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$)… ▽ More Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$) reactions. In organic liquid scintillator detectors, $α$ particles emitted from intrinsic contaminants such as $^{238}$U, $^{232}$Th, and $^{210}$Pb/$^{210}$Po, can be captured on $^{13}$C nuclei, followed by the emission of a MeV-scale neutron. Three distinct interaction mechanisms can produce prompt energy depositions preceding the delayed neutron capture, leading to a pair of events correlated in space and time within the detector. Thus, ($α, n$) reactions represent an indistinguishable background in liquid scintillator-based antineutrino detectors, where their expected rate and energy spectrum are typically evaluated via Monte Carlo simulations. This work presents results from the open-source SaG4n software, used to calculate the expected energy depositions from the neutron and any associated de-excitation products. Also simulated is a detailed detector response to these interactions, using a dedicated Geant4-based simulation software from the JUNO experiment. An expected measurable $^{13}$C$(α, n)^{16}$O event rate and reconstructed prompt energy spectrum with associated uncertainties, are presented in the context of JUNO, however, the methods and results are applicable and relevant to other organic liquid scintillator neutrino detectors. △ Less

Submitted 2 May, 2025; v1 submitted 2 March, 2025; originally announced March 2025.

Comments: 25 pages, 14 figures, 4 tables

Development of High-Sensitivity Radon Emanation Measurement Systems with Surface Treatment Optimization

Authors: Yuan Wu, Lin Si, Zhicheng Qian, Youhui Yun, Yue Meng, Jianglai Liu, Zhixing Gao, Hao Wang, Liangyu Wu, Yuanzi Liang

Abstract: Radon and its progenies are significant sources of background in rare event detection experiments, including dark matter searches like the PandaX-4T experiment and other rare decay studies such as neutrinoless double beta decay (NLDBD). In order to measure and control radon emanation for these experiments, we have developed two specialized radon measurement systems: a radon emanation measurement s… ▽ More Radon and its progenies are significant sources of background in rare event detection experiments, including dark matter searches like the PandaX-4T experiment and other rare decay studies such as neutrinoless double beta decay (NLDBD). In order to measure and control radon emanation for these experiments, we have developed two specialized radon measurement systems: a radon emanation measurement system suitable for small-sized samples with a blank rate of $0.03 \pm 0.01$ mBq in the 12.3 L counting chamber, and a radon trap system designed for large-volume samples using low-temperature radon trapping techniques, which improves the sensitivity by a factor of 30 with 1 standard liter per minute (slpm) gas flow and 6 hours trapping time. To boost the detection sensitivity, various surface treatments of the chambers were investigated, including mechanical polishing, electrochemical polishing, and mirror polishing, which reveals that smoother surfaces lead to lower radon emanation rates. In addition, treatments such as applying epoxy coating and covering with aluminized Mylar to stainless steel chambers can also reduce the radon emanation by ($90 \pm 7)\%$ and ($60 \pm 12)\%$, respectively. △ Less

Submitted 2 March, 2025; originally announced March 2025.

Comments: 21 pages, 9 figures, 2 tables

A general theory of the standard model and the revelation of the dark side of the universe

Authors: Yue-Liang Wu

Abstract: A general theory of the Standard Model (GSM) is presented in a spin-related gravigauge spacetime, grounded on conformal inhomogeneous spin gauge symmetry WS$_c$(1,3)=SP(1,3)$\rtimes$W$^{1,3}$$\rtimes$SP$_c$(1,1) and scaling gauge symmetry SG(1), along with symmetry U$_Y$(1)$\times$SU$_L$(2)$\times$SU(3)$_c$ in the standard model. It introduces new interactions: spin, chirality boost-spin, chiral c… ▽ More A general theory of the Standard Model (GSM) is presented in a spin-related gravigauge spacetime, grounded on conformal inhomogeneous spin gauge symmetry WS$_c$(1,3)=SP(1,3)$\rtimes$W$^{1,3}$$\rtimes$SP$_c$(1,1) and scaling gauge symmetry SG(1), along with symmetry U$_Y$(1)$\times$SU$_L$(2)$\times$SU(3)$_c$ in the standard model. It introduces new interactions: spin, chirality boost-spin, chiral conformal-spin, and scaling gauge forces. A gravitization equation is obtained to describe the gravitational effects emerging from the non-commutative derivative operator in gravigauge spacetime. In the framework of gravitational quantum field theory(GQFT), the gravitational force is mediated by the gravigauge field, identified as the massless graviton. Both gauge-type and geometric-type gravitational equations are derived to describe gravidynamics beyond general relativity. A massive chirality boost-spin gauge boson, termed the dark graviton, acts as a dark matter candidate, interacting with leptons and quarks via a spin gauge boson. A fundamental scalar field serves as a source of primordial energy and dark energy, driving the early inflation and current accelerated expansion of the universe. △ Less

Submitted 19 March, 2025; v1 submitted 26 February, 2025; originally announced February 2025.

Comments: 8 pages, typos corrected

Neutron multiplicity measurement in muon capture on oxygen nuclei in the Gd-loaded Super-Kamiokande detector

Authors: The Super-Kamiokande Collaboration, :, S. Miki, K. Abe, S. Abe, Y. Asaoka, C. Bronner, M. Harada, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Mine, M. Miura, S. Moriyama, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto , et al. (265 additional authors not shown)

Abstract: In recent neutrino detectors, neutrons produced in neutrino reactions play an important role. Muon capture on oxygen nuclei is one of the processes that produce neutrons in water Cherenkov detectors. We measured neutron multiplicity in the process using cosmic ray muons that stop in the gadolinium-loaded Super-Kamiokande detector. For this measurement, neutron detection efficiency is obtained with… ▽ More In recent neutrino detectors, neutrons produced in neutrino reactions play an important role. Muon capture on oxygen nuclei is one of the processes that produce neutrons in water Cherenkov detectors. We measured neutron multiplicity in the process using cosmic ray muons that stop in the gadolinium-loaded Super-Kamiokande detector. For this measurement, neutron detection efficiency is obtained with the muon capture events followed by gamma rays to be $50.2^{+2.0}_{-2.1}\%$. By fitting the observed multiplicity considering the detection efficiency, we measure neutron multiplicity in muon capture as $P(0)=24\pm3\%$, $P(1)=70^{+3}_{-2}\%$, $P(2)=6.1\pm0.5\%$, $P(3)=0.38\pm0.09\%$. This is the first measurement of the multiplicity of neutrons associated with muon capture without neutron energy threshold. △ Less

Submitted 24 February, 2025; originally announced February 2025.

Fast Whole-Brain CEST Imaging at 3T with True FISP Readout: Towards Homogeneous, Unbiased, Multi-Parameter and Clinical Application

Authors: Yupeng Wu, Siyuan Fang, Siyuan Wang, Caixia Fu, Yu Zhao, Jianqi Li

Abstract: Purpose: This study aimed to develop a reliable whole-brain multi-parameter CEST imaging sequence at 3T. By overcoming the limitations of existing imaging techniques, such as low SNR, image distortion, and magnetic susceptibility artifacts, this research intended to facilitate clinical research on brain diseases. Methods: A whole-brain single-shot CEST sequence with True FISP readout,also called b… ▽ More Purpose: This study aimed to develop a reliable whole-brain multi-parameter CEST imaging sequence at 3T. By overcoming the limitations of existing imaging techniques, such as low SNR, image distortion, and magnetic susceptibility artifacts, this research intended to facilitate clinical research on brain diseases. Methods: A whole-brain single-shot CEST sequence with True FISP readout,also called bSSFP was designed. The sequence included a pre-saturation module followed by a fast True FISP readout. The four-angle method was used to acquire B0, rB1, and T1 maps for CEST data correction. MRI experiments were carried out on five healthy volunteers using a 3T whole-body MRI system. Data processing involved motion correction, deep-learning denoising, B0 correction, neural network B1 correction, and four-pool Lorentz fitting. One participant underwent three scans over three days to calculate the coefficient of variation of CEST metrics in different brain regions and nuclei. Results: The CEST contrast of MTRLD and AREX with B1 correction, incorporating APT, NOE, and MT effects, was obtained within 9 minutes. Neural network B1 correction not only reduced the relative error of CEST images but also eliminated the inhomogeneous spatial distribution related to the B1 field. The coefficient of variation of CEST metrics in most brain regions was below 10%. Notably, no banding artifacts or magnetic susceptibility artifacts were observed, and the SAR value was within an acceptable range. Conclusion: Homogeneous, unbiased, multi-parameter whole-brain CEST imaging can be achieved within 9 minutes at 3T using a single-shot True FISP readout. This sequence enables rapid acquisition of high-SNR CEST images free from banding artifacts and magnetic susceptibility artifacts, making it suitable for clinical multi-parameter CEST imaging applications. △ Less

Submitted 24 February, 2025; originally announced February 2025.

Comments: Keywords: CEST, whole-brain, unbiased, multi-parameter, true fast imaging with steady-state precession (True FISP), balanced steady state free precession (bSSFP)

Evolution and sudden change of steady interactions of low enthalpy hypersonic double wedge flows with fore angle

Authors: Yihui Weng, Yi Duan, Qin Li, Yunchuan Wu, Mengyu Wang, Pan Yan, Siyi Li

Abstract: The evolution and sudden change of steady interaction structures is numerically studied with the fore wedge angle theta_1 in a low enthalpy hypersonic double wedge configuration. It particularly focuses on the conditions of Swantek and Austin's experiments where Ma=7, and h_0=2 MJ/kg but with a reduced Reynolds number (Re). The sudden structural change indicates that when theta_1 reaches a critica… ▽ More The evolution and sudden change of steady interaction structures is numerically studied with the fore wedge angle theta_1 in a low enthalpy hypersonic double wedge configuration. It particularly focuses on the conditions of Swantek and Austin's experiments where Ma=7, and h_0=2 MJ/kg but with a reduced Reynolds number (Re). The sudden structural change indicates that when theta_1 reaches a critical value, minor angular variations can trigger a discontinuous transformation in flow structures. The analysis is based on the laminar Navier-Stokes equations, using ideal gas and non-equilibrium gas models. Under the condition of Re=1E5/m, detailed numerical simulations are conducted as theta_1 varies over 0 deg-40 deg. This study yields the following findings: (a) The upper and lower boundaries of theta_1 for the onset of unsteady flow are identified. When theta_1 lies outside these boundaries, the flow remains steady. (b) As theta_1 increases, the interaction patterns evolve sequentially, progressing from Type VI through Type VI->V, Type III, Type IV_r, and ultimately to a flow dominated solely by a bow shock. This evolution defines the boundaries between different interaction patterns and provides a comprehensive understanding of their progression with theta_1. Sudden structural changes occur during the transitions from Type III to Type IV_r and from Type IV_r to a bow shock-dominated flow. In addition, a comparative study is performed through shock polar analysis to compare its predictions with computational results. (c) An unconventional reflection pattern of the transmitted shock over the separation zone, called Type III_r, is observed in non-equilibrium gas flows, which differs from classical interaction patterns. (d) The aerodynamic distribution of wall properties under various interactions is obtained, indicating distinct features before and after the sudden structural change. △ Less

Submitted 19 February, 2025; originally announced February 2025.

Supersonic flow kinetics: Mesoscale structures, thermodynamic nonequilibrium effects and entropy production mechanisms

Authors: Yanbiao Gan, Zhaowen Zhuang, Bin Yang, Aiguo Xu, Dejia Zhang, Feng Chen, Jiahui Song, Yanhong Wu

Abstract: Supersonic flow is a typical nonlinear, nonequilibrium, multiscale, and complex phenomenon. This paper applies discrete Boltzmann method/model (DBM) to simulate and analyze these characteristics. A Burnett-level DBM for supersonic flow is constructed based on the Shakhov-BGK model. Higher-order analytical expressions for thermodynamic nonequilibrium effects are derived, providing a constitutive ba… ▽ More Supersonic flow is a typical nonlinear, nonequilibrium, multiscale, and complex phenomenon. This paper applies discrete Boltzmann method/model (DBM) to simulate and analyze these characteristics. A Burnett-level DBM for supersonic flow is constructed based on the Shakhov-BGK model. Higher-order analytical expressions for thermodynamic nonequilibrium effects are derived, providing a constitutive basis for improving traditional macroscopic hydrodynamics modeling. Criteria for evaluating the validity of DBM are established by comparing numerical and analytical solutions of nonequilibrium measures. The multiscale DBM is used to investigate discrete/nonequilibrium characteristics and entropy production mechanisms in shock regular reflection. The findings include: (a) Compared to NS-level DBM, the Burnett-level DBM offers more accurate representations of viscous stress and heat flux, ensures non-negativity of entropy production in accordance with the second law of thermodynamics, and exhibits better numerical stability. (b) Near the interfaces of incident and reflected shock waves, strong nonequilibrium driving forces lead to prominent nonequilibrium effects. By monitoring the timing and location of peak nonequilibrium quantities, the evolution characteristics of incident and reflected shock waves can be accurately and dynamically tracked. (c) In the intermediate state, the bent reflected shock and incident shock interface are wider and exhibit lower nonequilibrium intensities compared to their final state. (d) The Mach number enhances various kinds of nonequilibrium intensities in a power-law manner $D_{mn} \sim \mathtt{Ma}^α$. The power exponent $α$ and kinetic modes of nonequilibrium effects $m$ follows a logarithmic relation $α\sim \ln (m - m_0)$. This research provides new perspectives and kinetic insights into supersonic flow studies. △ Less

Submitted 18 February, 2025; v1 submitted 15 February, 2025; originally announced February 2025.

Comments: 56 pages, 21 figures

Finite difference alternative WENO schemes with Riemann invariant-based local characteristic decompositions for compressible Euler equations

Authors: Yue Wu, Chi-Wang Shu

Abstract: The weighted essentially non-oscillatory (WENO) schemes are widely used for hyperbolic conservation laws due to the ability to resolve discontinuities and maintain high-order accuracy in smooth regions at the same time. For hyperbolic systems, the WENO procedure is usually performed on local characteristic variables that are obtained by local characteristic decompositions to avoid oscillation near… ▽ More The weighted essentially non-oscillatory (WENO) schemes are widely used for hyperbolic conservation laws due to the ability to resolve discontinuities and maintain high-order accuracy in smooth regions at the same time. For hyperbolic systems, the WENO procedure is usually performed on local characteristic variables that are obtained by local characteristic decompositions to avoid oscillation near shocks. However, such decompositions are often computationally expensive. In this paper, we study a Riemann invariant-based local characteristic decomposition for the compressible Euler equations that reduces the cost. We apply the WENO procedure to the local characteristic fields of the Riemann invariants, where the eigenmatrix is sparse and thus the computational cost can be reduced. It is difficult to obtain the cell averages of Riemann invariants from those of the conserved variables due to the nonlinear relation between them, so we only focus on the finite difference alternative WENO versions. The efficiency and non-oscillatory property of the proposed schemes are well demonstrated by our numerical results. △ Less

Submitted 11 February, 2025; originally announced February 2025.

Comments: 29 pages, 12 figures, 11 tables

MSC Class: 65M06; 76M20

Position reconstruction and surface background model for the PandaX-4T detector

Authors: Zhicheng Qian, Linhui Gu, Chen Cheng, Zihao Bo, Wei Chen, Xun Chen, Yunhua Chen, Zhaokan Cheng, Xiangyi Cui, Yingjie Fan, Deqing Fang, Zhixing Gao, Lisheng Geng, Karl Giboni, Xunan Guo, Xuyuan Guo, Zichao Guo, Chencheng Han, Ke Han, Changda He, Jinrong He, Di Huang, Houqi Huang, Junting Huang, Ruquan Hou , et al. (78 additional authors not shown)

Abstract: We report the position reconstruction methods and surface background model for the PandaX-4T dark matter direct search experiment. This work develops two position reconstruction algorithms: template matching (TM) method and photon acceptance function (PAF) method. Both methods determine the horizontal position of events based on the light pattern of secondary scintillation collected by the light s… ▽ More We report the position reconstruction methods and surface background model for the PandaX-4T dark matter direct search experiment. This work develops two position reconstruction algorithms: template matching (TM) method and photon acceptance function (PAF) method. Both methods determine the horizontal position of events based on the light pattern of secondary scintillation collected by the light sensors. After a comprehensive evaluation of resolution, uniformity, and robustness, the PAF method was selected for position reconstruction, while the TM method was employed for verification. The PAF method achieves a bulk event resolution of 1.0 mm and a surface event resolution of 4.4 mm for a typical $S2$ signal with a bottom charge of 1500 PE (about 14 keV). The uniformity is around 20\%. Robustness studies reveal average deviations of 5.1 mm and 8.8 mm for the commissioning run (Run0) and the first science run (Run1), respectively, due to the deactivation of certain PMTs. A data-driven surface background model is developed based on the PAF method. The surface background is estimated to be $0.09 \pm 0.06$ events for Run0 (0.54 tonne$\cdot$year) and $0.17 \pm 0.11$ events for Run1 (1.00 tonne$\cdot$year). △ Less

Submitted 11 February, 2025; originally announced February 2025.

Comments: 22 pages, 15 figures, 2 tables

Detection efficiency and spatial resolution of Monolithic Active Pixel Sensors bent to different radii

Authors: Anton Andronic, Pascal Becht, Mihail Bogdan Blidaru, Giuseppe Eugenio Bruno, Francesca Carnesecchi, Emma Chizzali, Domenico Colella, Manuel Colocci, Giacomo Contin, Laura Fabbietti, Roman Gernhäuser, Hartmut Hillemanns, Nicolo Jacazio, Alexander Philipp Kalweit, Alex Kluge, Artem Kotliarov, Filip Křížek, Lukas Lautner, Magnus Mager, Paolo Martinengo, Silvia Masciocchi, Marius Wilm Menzel, Alice Mulliri, Felix Reidt, Riccardo Ricci , et al. (15 additional authors not shown)

Abstract: Bent monolithic active pixel sensors are the basis for the planned fully cylindrical ultra low material budget tracking detector ITS3 of the ALICE experiment. This paper presents results from testbeam campaigns using high-energy particles to verify the performance of 50 um thick bent ALPIDE chips in terms of efficiency and spatial resolution. The sensors were bent to radii of 18, 24 and 30 mm, sli… ▽ More Bent monolithic active pixel sensors are the basis for the planned fully cylindrical ultra low material budget tracking detector ITS3 of the ALICE experiment. This paper presents results from testbeam campaigns using high-energy particles to verify the performance of 50 um thick bent ALPIDE chips in terms of efficiency and spatial resolution. The sensors were bent to radii of 18, 24 and 30 mm, slightly smaller than the foreseen bending radii of the future ALICE ITS3 layers. An efficiency larger than $99.9\%$ and a spatial resolution of approximately 5 um, in line with the nominal operation of flat ALPIDE sensors, is obtained at nominal operating conditions. These values are found to be independent of the bending radius and thus constitute an additional milestone in the demonstration of the feasibility of the planned ITS3 detector. In addition, a special geometry in which the beam particles graze the chip and traverse it laterally over distances of up to 3 mm is investigated. △ Less

Submitted 7 February, 2025; originally announced February 2025.

Sensitivity of three-dimensional boundary-layer stability to intrinsic uncertainties of fluid properties: a study on supercritical CO2

Authors: Jie Ren, Yongxiang Wu, Xuerui Mao, Cheng Wang, Markus Kloker

Abstract: The intrinsic uncertainty of fluid properties, including the equation of state, viscosity, and thermal conductivity, on boundary layer stability has scarcely been addressed. When a fluid is operating in the vicinity of the Widom line (defined as the maximum of isobaric specific heat) in supercritical state, its properties exhibit highly non-ideal behavior, which is an ongoing research field leadin… ▽ More The intrinsic uncertainty of fluid properties, including the equation of state, viscosity, and thermal conductivity, on boundary layer stability has scarcely been addressed. When a fluid is operating in the vicinity of the Widom line (defined as the maximum of isobaric specific heat) in supercritical state, its properties exhibit highly non-ideal behavior, which is an ongoing research field leading to refined and more accurate fluid property databases. Upon crossing the Widom line, new mechanisms of flow instability emerge, feasibly leading to changes in dominating modes that yield turbulence. The present work investigates the sensitivity of three-dimensional boundary-layer modal instability to these intrinsic uncertainties in fluid properties. The uncertainty, regardless of its source and the fluid regimes, gives rise to distortions of all profiles that constitute the inputs of the stability operator. The effect of these distortions on flow stability is measured by sensitivity coefficients, which are formulated with the adjoint operator and validated against linear modal stability analysis. The results are presented for carbon dioxide at a representative supercritical pressure of about 80 bar. The sensitivity to different inputs of the stability operator across various thermodynamic regimes show an immense range of sensitivity amplitude. A balancing relationship between the density gradient and its perturbation leads to a quadratic effect across the Widom line, provoking significant sensitivity to distortions of the second derivative of the pressure with respect to the density, $\partial^2 p/\partial ρ^2$. From an application-oriented point of view, one important question is whether the correct baseflow profiles can be meaningfully analyzed by the simplified ideal-fluid model... △ Less

Submitted 6 February, 2025; originally announced February 2025.

Thermodynamic nonequilibrium effects in three-dimensional high-speed compressible flows: Multiscale modeling and simulation via the discrete Boltzmann method

Authors: Qinghong Guo, Yanbiao Gan, Bin Yang, Yanhong Wu, Huilin Lai, Aiguo Xu

Abstract: Three-dimensional (3D) high-speed compressible flow is a typical nonlinear, nonequilibrium, and multiscale complex flow. Traditional fluid mechanics models, based on the quasi-continuum assumption and near-equilibrium approximation, are insufficient to capture significant discrete effects and thermodynamic nonequilibrium effects (TNEs) as the Knudsen number increases. To overcome these limitations… ▽ More Three-dimensional (3D) high-speed compressible flow is a typical nonlinear, nonequilibrium, and multiscale complex flow. Traditional fluid mechanics models, based on the quasi-continuum assumption and near-equilibrium approximation, are insufficient to capture significant discrete effects and thermodynamic nonequilibrium effects (TNEs) as the Knudsen number increases. To overcome these limitations, a discrete Boltzmann modeling and simulation method, rooted in kinetic and mean-field theories, has been developed. By applying Chapman-Enskog multiscale analysis, the essential kinetic moment relations $\bmΦ$ for characterizing second-order TNEs are determined. These relations are invariants in coarse-grained physical modeling, providing a unique mesoscopic perspective for analyzing TNE behaviors. A discrete Boltzmann model, accurate to the second-order in the Knudsen number, is developed to enable multiscale simulations of 3D supersonic flows. As key TNE measures, nonlinear constitutive relations (NCRs), are theoretically derived for the 3D case, offering a constitutive foundation for improving macroscopic fluid modeling. The NCRs in three dimensions exhibit greater complexity than their two-dimensional counterparts. This complexity arises from increased degrees of freedom, which introduce additional kinds of nonequilibrium driving forces, stronger coupling between these forces, and a significant increase in nonequilibrium components. At the macroscopic level, the model is validated through several classical test cases, ranging from 1D to 3D scenarios, from subsonic to supersonic regimes. At the mesoscopic level, the model accurately captures typical TNEs, such as viscous stress and heat flux, around mesoscale structures, across various scales and orders. This work provides kinetic insights that advance multiscale simulation techniques for 3D high-speed compressible flows. △ Less

Submitted 10 April, 2025; v1 submitted 3 February, 2025; originally announced February 2025.

Journal ref: Physics of Fluids 37, 046117 (2025)

The Influence of V-Defects, Leakage, and Random Alloy Fluctuations on the Carrier Transport in Red InGaN MQW LEDs

Authors: Huai-Chin Huang, Shih-Min Chen, Claude Weisbuch, James S. Speck, Yuh-Renn Wu

Abstract: Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies (IQEs) than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the indium composition increases. Additionally, the larger polarization and band offset barriers between high indium content InGaN quantum wells and GaN quantum ba… ▽ More Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies (IQEs) than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the indium composition increases. Additionally, the larger polarization and band offset barriers between high indium content InGaN quantum wells and GaN quantum barriers increase the forward voltage. In blue and green LEDs, random alloy fluctuations and V-defects play a key role in reducing the forward voltage. When V-defects are present, either naturally or intentionally introduced, they create an alternative path for carrier injection into the MQWs through the V-defect sidewalls. This injection mechanism explains the turn-on voltages of green LEDs. However, in InGaN red LEDs, these two phenomena do not reduce the forward voltage as effectively as in blue and green LEDs, and consequently, the computed forward voltage remains significantly higher than the measured one. Furthermore, currents are observed at low voltages before the turn-on voltage (\(V < \hbarω/e = 2.0 \, \text{V}\)) of red LEDs. To address this, we introduce dislocation-induced tail states in the modeling, suggesting that leakage current through these states may play a significant role both below and at turn-on voltages. The simulation also indicates that leakage carriers below turn-on accumulate, partially diffuse in the QWs, screen the polarization-induced barrier in the low injection regime, and further reduce the forward voltage. Despite these beneficial effects, a drawback of dislocation-induced tail states is the enhanced nonradiative recombination in the dislocation line region. This study provides a detailed analysis of device injection physics in InGaN QW red LEDs and outlines potential optimization strategies. △ Less

Submitted 31 January, 2025; originally announced January 2025.

Comments: 8 pages, 8 figures

Unified Flow Rule of Undeveloped and Fully Developed Dense Granular Flows Down Rough Inclines

Authors: Yanbin Wu, Thomas Pähtz, Zixiao Guo, Lu Jing, Zhao Duan, Zhiguo He

Abstract: We report on chute measurements of the free-surface velocity $v$ in dense flows of spheres and diverse sands and spheres-sand mixtures down rough inclines. These and previous measurements are inconsistent with standard flow rules, in which the Froude number $v/\sqrt{gh}$ scales linearly with $h/h_s$ or $(\tanθ/μ_r)^2h/h_s$, where $μ_r$ is the dynamic friction coefficient, $h$ the flow thickness, a… ▽ More We report on chute measurements of the free-surface velocity $v$ in dense flows of spheres and diverse sands and spheres-sand mixtures down rough inclines. These and previous measurements are inconsistent with standard flow rules, in which the Froude number $v/\sqrt{gh}$ scales linearly with $h/h_s$ or $(\tanθ/μ_r)^2h/h_s$, where $μ_r$ is the dynamic friction coefficient, $h$ the flow thickness, and $h_s(θ)$ its smallest value that permits a steady, uniform dense flow state at a given inclination angle $θ$. This is because the characteristic length $L$ a flow needs to fully develop can exceed the chute or travel length $l$ and because neither rule is universal for fully developed flows across granular materials. We use a dimensional analysis motivated by a recent unification of sediment transport to derive a flow rule that solves both problems in accordance with our and previous measurements: $v=v_\infty[1-\exp(-l/L)]^{1/2}$, with $v_\infty\proptoμ_r^{3/2}\left[(\tanθ-μ_r)h\right]^{4/3}$ and $L\proptoμ_r^3\left[(\tanθ-μ_r)h\right]^{5/3}h$. △ Less

Submitted 17 January, 2025; originally announced January 2025.

Journal ref: Physical Review Letters 134 (2), 028201 (2025)

3D Single-shot CEST imaging at 3T Based on True FISP Readout

Authors: Yupeng Wu, Qifan Pang, Zhichao Wang, Gaiying Li, Caixia Fu, Mengqiu Cao, Xingrui Wang, Yang Song, Yu Zhao, Jianqi Li

Abstract: To simultaneously fit multiple-pool effects, spectrally selective 3D CEST imaging typically requires single-shot readouts to save time. However, to date, FLASH and EPI have been the primary pulse sequences used for this purpose. They suffer from low SNR or image distortion related to B0 field inhomogeneity. In this work, we developed a 3D single-shot CEST sequence using true fast imaging with stea… ▽ More To simultaneously fit multiple-pool effects, spectrally selective 3D CEST imaging typically requires single-shot readouts to save time. However, to date, FLASH and EPI have been the primary pulse sequences used for this purpose. They suffer from low SNR or image distortion related to B0 field inhomogeneity. In this work, we developed a 3D single-shot CEST sequence using true fast imaging with steady-state precession (True FISP) readout, also known as bSSFP, and optimized the scanning parameters through simulations. The performance of the CEST sequence was validated using an egg white phantom, ten healthy volunteers, and a patient with a brain tumor on a 3T human scanner. Subsequently, the proposed CEST sequence using True FISP was compared with the commonly used FLASH-based CEST sequence, focusing on SNR and image contrast, while maintaining identical pre-saturation modes, repetition time, echo time and scan time. In the simulation experiments, the maximum CEST signal obtained from the True FISP was significantly greater than that obtained from the FLASH sequence. In the egg white phantom, the SNRs of amide proton transfer (APT) and nuclear Overhauser enhancement (NOE) effect images obtained from the True FISP were 68.3% and 57.0% higher than those obtained from the FLASH sequence, respectively. In healthy volunteers, saturated images collected with the True FISP sequence at 3.5 ppm showed an approximate 84% increase in mean temporal SNR compared to those collected with the FLASH sequence. Compared to the FLASH sequence, the CEST images obtained from the True FISP sequence could display more detailed brain tissue structures of both normal individuals and the patient with a brain tumor. Therefore, due to the high SNR inherent in the sequence, True FISP has the potential to be used for fast and high-quality 3D image readout of CEST contrasts in clinical applications. △ Less

Submitted 9 February, 2025; v1 submitted 7 January, 2025; originally announced January 2025.

Comments: 37 pages, 8 figures

Simulating Pattern Recognition Using Non-volatile Synapses: MRAM, Ferroelectrics and Magnetic Skyrmions

Authors: Luis Sosa, Minhyeok Wi, Miguel Barrera, Imran Nasrullah, Yingying Wu

Abstract: This project explores the use of non-volatile synapses in neuromorphic computing for pattern recognition tasks through a comprehensive simulation-based approach. The main approach is through spintronic synapses, which leverage the electron's spin properties to achieve efficient data processing and storage. This offers a promising alternative to traditional electronic synapses which require constan… ▽ More This project explores the use of non-volatile synapses in neuromorphic computing for pattern recognition tasks through a comprehensive simulation-based approach. The main approach is through spintronic synapses, which leverage the electron's spin properties to achieve efficient data processing and storage. This offers a promising alternative to traditional electronic synapses which require constant power recharge to prevent data leakage. The goal is to develop and simulate a neural network model that incorporates spintronic synapses, examining their potential to perform complex pattern recognition tasks such as image and sound classification. By building a simulation environment, we will replicate various models, including spin transfer torque based MRAM, voltage controlled magnetic anisotropy based MRAM, ferroelectric field effect transistors, and skyrmion based nanotrack for synaptic devices, to evaluate their performance and compare results across different non-volatile implementations. The findings will highlight the effectiveness of spintronic synapses in creating low-power, high-performance neuromorphic hardware, providing valuable insights into their application for future energy-efficient artificial intelligence systems. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Comments: 17 pages, 6 figure

Foam stabilization in salt solutions : the role of capillary drainage and Marangoni stresses

Authors: Ekta Sharma, Suraj Borkar, Philipp Baumli, Xinfeng Shi, James Y. Wu, David Myung, Gerald G. Fuller

Abstract: The long-standing question of why foaming is easier in seawater than in freshwater remains unresolved. In this study, we address this issue through precise interferometry single bubble experiments, demonstrating that the theory proposed by G. Marrucci (1969) provides a compelling explanation. Electrolyte solutions with varying concentrations of phosphate salts were used to study film formation and… ▽ More The long-standing question of why foaming is easier in seawater than in freshwater remains unresolved. In this study, we address this issue through precise interferometry single bubble experiments, demonstrating that the theory proposed by G. Marrucci (1969) provides a compelling explanation. Electrolyte solutions with varying concentrations of phosphate salts were used to study film formation and drainage, with thickness tracked by interferometry. In deionized water, bubbles rupture within seconds due to repaid dimple collapse. However, in phosphate salt solutions, bubbles persisted for several minutes. While surface tension gradients from evaporation-driven salt concentration gradients have been thought to create Marangoni stresses, our results show that despite film thinning being capillary-dominated, Marangoni-driven influx can be observed. Marrucci's theory explains this by showing that an increased interfacial area as the film thins, leads to higher salt concentration in the film due to Gibbs surface excess. This concentration gradient induces Marangoni stresses, causing flow reversal, increased film thickness, and enhanced foam stability. We show that Marrucci's theory has been incorrectly dismissed, and the predicted critical heights where fluid influx occurs closely match our findings and other studies using sodium chloride. Additionally, we extend the theory's applicability to foam films in non-aqueous film mixtures, highlighting its broader relevance. △ Less

Submitted 5 January, 2025; originally announced January 2025.

A self-learning magnetic Hopfield neural network with intrinsic gradient descent adaption

Authors: Chang Niu, Huanyu Zhang, Chuanlong Xu, Wenjie Hu, Yunzhuo Wu, Yu Wu, Yadi Wang, Tong Wu, Yi Zhu, Yinyan Zhu, Wenbin Wang, Yizheng Wu, Lifeng Yin, Jiang Xiao, Weichao Yu, Hangwen Guo, Jian Shen

Abstract: Physical neural networks using physical materials and devices to mimic synapses and neurons offer an energy-efficient way to implement artificial neural networks. Yet, training physical neural networks are difficult and heavily relies on external computing resources. An emerging concept to solve this issue is called physical self-learning that uses intrinsic physical parameters as trainable weight… ▽ More Physical neural networks using physical materials and devices to mimic synapses and neurons offer an energy-efficient way to implement artificial neural networks. Yet, training physical neural networks are difficult and heavily relies on external computing resources. An emerging concept to solve this issue is called physical self-learning that uses intrinsic physical parameters as trainable weights. Under external inputs (i.e. training data), training is achieved by the natural evolution of physical parameters that intrinsically adapt modern learning rules via autonomous physical process, eliminating the requirements on external computation resources.Here, we demonstrate a real spintronic system that mimics Hopfield neural networks (HNN) and unsupervised learning is intrinsically performed via the evolution of physical process. Using magnetic texture defined conductance matrix as trainable weights, we illustrate that under external voltage inputs, the conductance matrix naturally evolves and adapts Oja's learning algorithm in a gradient descent manner. The self-learning HNN is scalable and can achieve associative memories on patterns with high similarities. The fast spin dynamics and reconfigurability of magnetic textures offer an advantageous platform towards efficient autonomous training directly in materials. △ Less

Submitted 6 January, 2025; v1 submitted 3 January, 2025; originally announced January 2025.

Comments: 21 pages, 5 figures

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 121 (51) e2416294121,(2024)

Decoupling of carbonate-organic carbon isotope during the Carnian Pluvial Episode

Authors: Enhao Jia, Kui Wu, Yong Du, Yuyang Wu, Fengyu Wang, Xu Dai, Huyue Song, Daoliang Chu, Lei Zhong, Zhiwei Yuan, Xiangmin Chen, Zhe Li, Haijun Song

Abstract: The Carnian Pluvial Episode (CPE) was a major global climate change event in the early Late Triassic that significantly affected marine ecosystems and carbon cycles. One of the most prominent features of the CPE is the coupled multiple negative carbonate-organic carbon isotope excursions. However, at Erguan and Xiashulao from eastern Tethys, a decoupling between carbonate-organic carbon isotope du… ▽ More The Carnian Pluvial Episode (CPE) was a major global climate change event in the early Late Triassic that significantly affected marine ecosystems and carbon cycles. One of the most prominent features of the CPE is the coupled multiple negative carbonate-organic carbon isotope excursions. However, at Erguan and Xiashulao from eastern Tethys, a decoupling between carbonate-organic carbon isotope during CPE was observed. At the end of early Carnian (Julian), the carbonate carbon isotope showed a negative excursion of 2-3 per-mille, while the organic carbon isotope exhibited a positive excursion of about 3-4 per-mille. In addition, increased terrestrial inputs is indicated by the rising C/N (3 to 10) and decreasing Y/Ho (42 to 27) that coexist with this decoupling. The coupling of carbon isotope negative excursions is from the shallow shelves and the deep slopes, whereas the decoupling occurs from the deep shelf to the shallow slope. In the deep shelf to the shallow slope, sedimentary organic matter is mainly sourced from pelagic before the CPE as evidenced by low C/N (3) and high Y/Ho (36-42). During the CPE, the increased fresh water flux (Sr/Ba <1) enhanced terrestrial input in organic matter, which may cause positive excursions in the carbon isotope record with elevated TOC content. As a result, the carbonate-organic carbon isotope decoupled. In contrast, organic matter in sediments from the shallow shelf and deep slope are mainly from terrestrial and pelagic sources, respectively. This study reveals the significant impact of terrestrial inputs on marine carbon cycling during the Carnian Pluvial Episode, highlighting the crucial role of climate events in modifying the carbon isotope record. △ Less

Submitted 25 December, 2024; v1 submitted 18 December, 2024; originally announced December 2024.

Comments: 49 pages, 10 figures

Hugoniot equation of state and sound velocity of CaSiO3 glass under shock compression

Authors: Ye Wu, Qing Zhang, Yishi Wang, Yu Hu, Zehui Li, Zining Li, Chang Gao, Xun Liu, Haijun Huang, Yingwei Fei

Abstract: Davemaoite, as the third most abundant mineral in the lower mantle, constitutes significant amounts in pyrolite and mid-ocean ridge basalts. Due to its unquenchable nature, measurements by static compression techniques on physical properties of davemaoite at lower mantle conditions are rare and technically challenging, and those are essential to constrain compositions and properties of mineralogic… ▽ More Davemaoite, as the third most abundant mineral in the lower mantle, constitutes significant amounts in pyrolite and mid-ocean ridge basalts. Due to its unquenchable nature, measurements by static compression techniques on physical properties of davemaoite at lower mantle conditions are rare and technically challenging, and those are essential to constrain compositions and properties of mineralogical models in the lower mantle. Here, we present Hugoniot equation of state and sound velocity of CaSiO3 glass under shock compression. The CaSiO3 glass transforms into the crystalline phase above 34 GPa and completely transforms into davemaoite above 120 GPa. Thermal equation of state and Hugoniot temperature of davemaoite have been derived from the shock wave data. The CaSiO3 glass under shcok compression has very high shock temperature. Shock wave experiments for sound velocity of CaSiO3 glass indicate that no melting is observed at Hugoniot pressure up to 117.6 GPa. We propose that the melting temperature of davemaoite should be higher than those reported theoretically by now. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Quadrupole topological behavior of elastic waves in two-dimensional square lattices with nonsymmorphic symmetries

Authors: Yijie Liu, Yuyang Chen, Zhaoyang Guo, Zhi-Kang Lin, Di Zhou, Feng Li, Ying Wu

Abstract: We investigate a novel higher-order topological behavior in elastic lattices characterized by nonsymmorphic symmetries. In the theoretical spring-mass lattice, altering the vertex mass allows for fine-tuning of the topological features within the bandgap. We analyze the quadrupole topological behavior in square lattices with nonsymmorphic symmetries using nested Wannier bands. Beyond second-order… ▽ More We investigate a novel higher-order topological behavior in elastic lattices characterized by nonsymmorphic symmetries. In the theoretical spring-mass lattice, altering the vertex mass allows for fine-tuning of the topological features within the bandgap. We analyze the quadrupole topological behavior in square lattices with nonsymmorphic symmetries using nested Wannier bands. Beyond second-order topological metamaterials, a single-phase topological configuration promotes energy localization at the corners due to a non-zero relative quadrupole moment. Our findings are validated through experimental observations of higher-order topological corner states, which show excellent agreement with simulated results and theoretical predictions. Additionally, the elastic lattices in the self-similar system exhibit fractal higher-order topological behaviors, revealing numerous topological edge and corner states. The self-similar lattice also demonstrates enhanced energy localization, with the number of topological states showing a linear correlation to the corner dimension. This study provides new insights into elastic higher-order topological insulators and inspires innovative strategies for simulating topological elastic materials. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Non-perturbative cathodoluminescence microscopy of beam-sensitive materials

Authors: Malcolm Bogroff, Gabriel Cowley, Ariel Nicastro, David Levy, Yueh-Chun Wu, Nannan Mao, Tilo H. Yang, Tianyi Zhang, Jing Kong, Rama Vasudevan, Kyle P. Kelley, Benjamin J. Lawrie

Abstract: Cathodoluminescence microscopy is now a well-established and powerful tool for probing the photonic properties of nanoscale materials, but in many cases, nanophotonic materials are easily damaged by the electron-beam doses necessary to achieve reasonable cathodoluminescence signal-to-noise ratios. Two-dimensional materials have proven particularly susceptible to beam-induced modifications, yieldin… ▽ More Cathodoluminescence microscopy is now a well-established and powerful tool for probing the photonic properties of nanoscale materials, but in many cases, nanophotonic materials are easily damaged by the electron-beam doses necessary to achieve reasonable cathodoluminescence signal-to-noise ratios. Two-dimensional materials have proven particularly susceptible to beam-induced modifications, yielding both obstacles to high spatial-resolution measurement and opportunities for beam-induced patterning of quantum photonic systems. Here pan-sharpening techniques are applied to cathodoluminescence microscopy in order to address these challenges and experimentally demonstrate the promise of pan-sharpening for minimally-perturbative high-spatial-resolution spectrum imaging of beam-sensitive materials. △ Less

Submitted 15 December, 2024; originally announced December 2024.

A Novel Low-Background Photomultiplier Tube Developed for Xenon Based Detectors

Authors: Youhui Yun, Zhizhen Zhou, Baoguo An, Zhixing Gao, Ke Han, Jianglai Liu, Yuanzi Liang, Yang Liu, Yue Meng, Zhicheng Qian, Xiaofeng Shang, Lin Si, Ziyan Song, Hao Wang, Mingxin Wang, Shaobo Wang, Liangyu Wu, Weihao Wu, Yuan Wu, Binbin Yan, Xiyu Yan, Zhe Yuan, Tao Zhang, Qiang Zhao, Xinning Zeng

Abstract: Photomultiplier tubes (PMTs) are essential in xenon detectors like PandaX, LZ, and XENON experiments for dark matter searches and neutrino properties measurement. To minimize PMT-induced backgrounds, stringent requirements on PMT radioactivity are crucial. A novel 2-inch low-background R12699 PMT has been developed through a collaboration between the PandaX team and Hamamatsu Photonics K.K. corpor… ▽ More Photomultiplier tubes (PMTs) are essential in xenon detectors like PandaX, LZ, and XENON experiments for dark matter searches and neutrino properties measurement. To minimize PMT-induced backgrounds, stringent requirements on PMT radioactivity are crucial. A novel 2-inch low-background R12699 PMT has been developed through a collaboration between the PandaX team and Hamamatsu Photonics K.K. corporation. Radioactivity measurements conducted with a high-purity germanium detector show levels of approximately 0.08 mBq/PMT for $\rm^{60}Co$ and 0.06~mBq/PMT for the $\rm^{238}U$ late chain, achieving a 15-fold reduction compared to R11410 PMT used in PandaX-4T. The radon emanation rate is below 3.2 $\rm μ$Bq/PMT (@90\% confidence level), while the surface $\rm^{210}Po$ activity is less than 18.4 $μ$Bq/cm$^2$. The electrical performance of these PMTs at cryogenic temperature was evaluated. With an optimized readout base, the gain was enhanced by 30\%, achieving an average gain of $4.23 \times 10^6$ at -1000~V and -100~$^{\circ}$C. The dark count rate averaged 2.5~Hz per channel. Compactness, low radioactivity, and robust electrical performance in the cryogenic temperature make the R12699 PMT ideal for next-generation liquid xenon detectors and other rare event searches. △ Less

Submitted 9 February, 2025; v1 submitted 14 December, 2024; originally announced December 2024.

Unveiling the Role of Lewis Base Strength in Small-Molecule Passivation of Defect Perovskites

Authors: Yi-Chen Wu, Hsien-Hsin Chou

Abstract: Perovskite materials are highly promising for a range of optoelectronic applications including energy conversion technologies, owing to their high charge-carrier mobilities, adaptability of bandgap tuning, and exceptional light-harvesting capabilities. Yet, defects that arise during manufacturing often lead to performance limitations such as hindered efficiency and stability. This is primarily due… ▽ More Perovskite materials are highly promising for a range of optoelectronic applications including energy conversion technologies, owing to their high charge-carrier mobilities, adaptability of bandgap tuning, and exceptional light-harvesting capabilities. Yet, defects that arise during manufacturing often lead to performance limitations such as hindered efficiency and stability. This is primarily due to significant deviations in crystal geometry and band structure elements such as the Fermi level, work function, and density of states, compared to pristine perovskite. To mitigate these issues, this study explored the passivation of surface iodide-vacancy defect in perovskite using small-molecule Lewis bases, an approach aims to counteract these detrimental effects. Among the examined N-, P- and O-coordinated benzyl derivatives, those featuring a phosphonic acid group as a passivator for the undercoordinated Pb(II) sites demonstrated outstanding electronic structure properties. This was notably achieved by lowering the Fermi level, increasing the work function, and suppressing surface trap states. The effective restoration of electronic properties achieved by targeted small molecule passivation provides crucial insights into enhanced functionality and efficiency for defect perovskite materials. △ Less

Submitted 4 December, 2024; originally announced December 2024.

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

Authors: Qi Wang, Luning Hao, Hongye Zhang, Guojin Sun, Haigening Wei, Yuyang Wu, Zhipeng Huang, Jintao Hu, Tim Coombs

Abstract: A 2D electromagnetic-thermal coupled numerical model has been developed using the finite element method and validated against experimental data to investigate a superconducting machine featuring high-temperature superconducting (HTS) tape stacks and cryocooled iron cores. The HTS stacks are transformed into trapped field stacks (TFSs) through pulsed field magnetisation (PFM), generating rotor fiel… ▽ More A 2D electromagnetic-thermal coupled numerical model has been developed using the finite element method and validated against experimental data to investigate a superconducting machine featuring high-temperature superconducting (HTS) tape stacks and cryocooled iron cores. The HTS stacks are transformed into trapped field stacks (TFSs) through pulsed field magnetisation (PFM), generating rotor fields. After PFM, the superconducting motor operates on the same principle as permanent magnet synchronous motors. This study explores the behaviour of HTS stacks by altering the stack's layer number from one to nine and adjusting the pulsed current amplitude from 250 A to 1000 A. The primary objective of this paper is to identify the optimal combination of pulsed current amplitudes and TFS layer numbers for achieving maximum magnetisation fields. The secondary objective is to evaluate the overall losses in both superconducting and non-superconducting parts of the machine during magnetisation, including heat generated in various layers of the TFS, and losses in the motor's active materials (copper windings and iron cores). Two motor configurations were proposed, and two calculation methods using linear interpolation of iron losses and steel grades were introduced to estimate the iron losses for the studied iron material, M270-35A. This pioneering study is expected to serve as a valuable reference for loss analyses and structural design considerations in developing superconducting machines. △ Less

Submitted 2 December, 2024; originally announced December 2024.

Comments: 19pages, 18 figures, 5 tables