Showing 1–50 of 494 results for author: Wu, H

Superior Frequency Stability and Long-Lived State-Swapping in Cubic-SiC Mechanical Mode Pairs

Authors: Huanying Sun, Yanlin Chen, Qichun Liu, Haihua Wu, Yuqing Wang, Tiefu Li, Yulong Liu

Abstract: The multimode cavity optomechanical system offers versatile applications including state transduction, coherent interconnection, and many-body simulations. In this study, we developed a cavity electromechanical system that integrates a 3C-SiC membrane and a rectangular superconducting cavity to observe the generation of nearly degenerate pairs of mechanical modes. Subsequently, we derive the expre… ▽ More The multimode cavity optomechanical system offers versatile applications including state transduction, coherent interconnection, and many-body simulations. In this study, we developed a cavity electromechanical system that integrates a 3C-SiC membrane and a rectangular superconducting cavity to observe the generation of nearly degenerate pairs of mechanical modes. Subsequently, we derive the expression for intrinsic frequency under nonuniform stress and find that this method supports a remarkably resolution for stress analysis in thin films. Experimentally, we perform collective fitting on the measured set of 57 mechanical modes, revealing deviations in biaxial non-uniform stress on the order of MPa. These degeneracy-broken mechanical modes exhibit exceptional quality factors as high as $10^8$ in a thermal bath of 10 mK. Furthermore, Allan deviation indicates that these modes exhibit extremely stable frequencies compared with different types of optomechanical devices. We then performed state-swapping between near-degenerate mode pairs, demonstrating the transfer efficiency exceeding 78\%, attributed to their exceptionally long lifetimes. This study paves the way for the design of compact quantum phononic devices featuring high-quality-factor mechanical multimode. △ Less

Submitted 7 July, 2025; originally announced July 2025.

Comments: 12 pages, 6 figures

Water evaporation-driven dynamic diode for direct electricity generation

Authors: Jiarui Guo, Xuanzhang Hao, Yuxia Yang, Shaoqi Huang, Zhihao Qian, Minhui Yang, Hanming Wu, Liangti Qu, Novoselov Kostya S, Shisheng Lin

Abstract: Harnessing energy from ubiquitous water resources via molecular-scale mechanisms remains a critical frontier in sustainable energy research. Herein, we present a novel evaporation-driven power generator based on a dynamic diode architecture that continuously harvests direct current (DC) electricity by leveraging the flipping of the strong built-in electric field (up to 10E10 V/cm) generated by pol… ▽ More Harnessing energy from ubiquitous water resources via molecular-scale mechanisms remains a critical frontier in sustainable energy research. Herein, we present a novel evaporation-driven power generator based on a dynamic diode architecture that continuously harvests direct current (DC) electricity by leveraging the flipping of the strong built-in electric field (up to 10E10 V/cm) generated by polar molecules such as water to drive directional carrier migration. In our system, water molecules undergo sequential polarization and depolarization at the graphene-water-silicon interface, triggering cycles of charge trapping and release. This nonionic mechanism is driven primarily by the Fermi level difference between graphene and silicon, augmented by the intrinsic dipole moment of water molecules. Structural optimization using graphene enhances evaporation kinetics and interfacial contact, yielding an open-circuit voltage of 0.35 V from a 2 cm * 1 cm device. When four units are connected in series, the system delivers a stable 1.2V output. Unlike ion-mediated energy harvesters, this corrosion-free architecture ensures long-term stability and material compatibility. Our work introduces a fundamentally new approach to water-based power generation, establishing interfacial polarization engineering as a scalable strategy for low-cost, sustainable electricity production from ambient water. △ Less

Submitted 4 July, 2025; originally announced July 2025.

Comments: 11 pages,4 figures

Super-resolution of two Closely-spaced Electromagnetic Fields via Walsh-Modulated Dynamical Decoupling Spectroscopy

Authors: Hao Wu, Grant D. Mitts, Clayton Z. C. Ho, Joshua A. Rabinowitz, Eric R. Hudson

Abstract: Due to quantum fluctuations, non-orthogonal quantum states cannot be distinguished with complete certainty, making their underlying physical parameters difficult to resolve. Traditionally, it has been believed that the linewidth of a system behaves like these quantum fluctuations to set the ultimate limit on frequency resolution as two oscillating electromagnetic fields are applied. Consequently,… ▽ More Due to quantum fluctuations, non-orthogonal quantum states cannot be distinguished with complete certainty, making their underlying physical parameters difficult to resolve. Traditionally, it has been believed that the linewidth of a system behaves like these quantum fluctuations to set the ultimate limit on frequency resolution as two oscillating electromagnetic fields are applied. Consequently, the measurement time required to resolve a frequency difference $Δω$ was assumed to diverge as $Δω\rightarrow 0$. Here, we show that linewidth does not play a defining role in resolving two closely spaced frequencies. Instead, the ultimate limit is set by parameter-independent quantum fluctuations, such as shot noise in our case. We propose and experimentally demonstrate the first general broadband protocol for super-resolution spectroscopy. Specifically, our protocol uses a Walsh-modulated dynamical decoupling (WMDD) sequence to encode $Δω$ between two unknown tones into a quantum state. This leverages phase information to suppress parameter-independent shot noise, thereby enhancing the signal-to-noise ratio and enabling super-resolution spectroscopy. With this approach, we resolve two randomly chosen oscillating electric fields of order 100 MHz separated by 5 Hz, with a measured frequency difference of 5.0(1.6) Hz using a measurement time per run of just 1 ms, representing an improvement of 200 beyond the traditional resolution limit. As such, our technique accelerates data acquisition by more than $10^5$ magnitude compared to conventional methods. Crucially, as our protocol is rooted in the motional Raman (quantum vector signal analyzer) framework, it is effective across an arbitrary frequency range and thus promises to enhance broadband sensing of electromagnetic fields and improve spectral efficiency of next-generation communication systems. △ Less

Submitted 28 June, 2025; originally announced June 2025.

Comments: 16 page, 8 figures

Consistent Sampling and Simulation: Molecular Dynamics with Energy-Based Diffusion Models

Authors: Michael Plainer, Hao Wu, Leon Klein, Stephan Günnemann, Frank Noé

Abstract: Diffusion models have recently gained significant attention due to their effectiveness in various scientific domains, including biochemistry. When trained on equilibrium molecular distributions, diffusion models provide both: a generative procedure to sample equilibrium conformations and associated forces derived from the model's scores. However, using the forces for coarse-grained molecular dynam… ▽ More Diffusion models have recently gained significant attention due to their effectiveness in various scientific domains, including biochemistry. When trained on equilibrium molecular distributions, diffusion models provide both: a generative procedure to sample equilibrium conformations and associated forces derived from the model's scores. However, using the forces for coarse-grained molecular dynamics simulations uncovers inconsistencies in the samples generated via classical diffusion inference and simulation, despite both originating from the same model. Particularly at the small diffusion timesteps required for simulations, diffusion models fail to satisfy the Fokker-Planck equation, which governs how the score should evolve over time. We interpret this deviation as an indication of the observed inconsistencies and propose an energy-based diffusion model with a Fokker-Planck-derived regularization term enforcing consistency. We demonstrate the effectiveness of our approach on toy systems, alanine dipeptide, and introduce a state-of-the-art transferable Boltzmann emulator for dipeptides that supports simulation and demonstrates enhanced consistency and efficient sampling. △ Less

Submitted 20 June, 2025; originally announced June 2025.

Floquet-engineered decoherence-resilient protocols for wideband sensing beyond the linear standard quantum limit

Authors: Hao Wu, Clayton Z. C. Ho, Grant D. Mitts, Joshua A. Rabinowitz, Eric R. Hudson

Abstract: A key advantage of quantum metrology is the ability to surpass the standard quantum limit for measurement precision through the use of non-classical states. However, there is typically little to no improvement in precision with the use of non-classical states for measurements whose duration exceeds the decoherence time of the underlying quantum states. Measurements aimed at the ultimate possible p… ▽ More A key advantage of quantum metrology is the ability to surpass the standard quantum limit for measurement precision through the use of non-classical states. However, there is typically little to no improvement in precision with the use of non-classical states for measurements whose duration exceeds the decoherence time of the underlying quantum states. Measurements aimed at the ultimate possible precision are thus performed almost exclusively with classical states and, therefore, are constrained by the standard quantum limit. Here, we demonstrate that by using the phenomenon of subharmonic excitation, in combination with a recently demonstrated technique of Raman excitation of a harmonic oscillator, the frequency of an electric field can be measured at a resolution below the standard quantum limit of the corresponding linear measurement. As the input states can be classical, this metrological gain persists to long timescales and improves the ultimate possible precision. While we demonstrate this technique using motional Raman subharmonic excitation of a single 40ca^+ ion through engineered Floquet states, this technique is expected to be extendable to other platforms, such as NV centers, solid-state qubits, and neutral atoms, where it can provide metrological gain for sensing across the radio frequency, microwave, and optical domains. △ Less

Submitted 3 June, 2025; originally announced June 2025.

Comments: 13 pages; 3 figures in the main text, 5 figures in the SI

Ocean-E2E: Hybrid Physics-Based and Data-Driven Global Forecasting of Extreme Marine Heatwaves with End-to-End Neural Assimilation

Authors: Ruiqi Shu, Yuan Gao, Hao Wu, Ruijian Gou, Yanfei Xiang, Fan Xu, Qingsong Wen, Xian Wu, Xiaomeng Huang

Abstract: This work focuses on the end-to-end forecast of global extreme marine heatwaves (MHWs), which are unusually warm sea surface temperature events with profound impacts on marine ecosystems. Accurate prediction of extreme MHWs has significant scientific and financial worth. However, existing methods still have certain limitations, especially in the most extreme MHWs. In this study, to address these i… ▽ More This work focuses on the end-to-end forecast of global extreme marine heatwaves (MHWs), which are unusually warm sea surface temperature events with profound impacts on marine ecosystems. Accurate prediction of extreme MHWs has significant scientific and financial worth. However, existing methods still have certain limitations, especially in the most extreme MHWs. In this study, to address these issues, based on the physical nature of MHWs, we created a novel hybrid data-driven and numerical MHWs forecast framework Ocean-E2E, which is capable of 40-day accurate MHW forecasting with end-to-end data assimilation. Our framework significantly improves the forecast ability of extreme MHWs by explicitly modeling the effect of oceanic mesoscale advection and air-sea interaction based on a differentiable dynamic kernel. Furthermore, Ocean-E2E is capable of end-to-end MHWs forecast and regional high-resolution prediction using neural data assimilation approaches, allowing our framework to operate completely independently of numerical models while demonstrating high assimilation stability and accuracy, outperforming the current state-of-the-art ocean numerical forecasting-assimilation models. Experimental results show that the proposed framework performs excellently on global-to-regional scales and short-to-long-term forecasts, especially in those most extreme MHWs. Overall, our model provides a framework for forecasting and understanding MHWs and other climate extremes. Our codes are available at https://github.com/ChiyodaMomo01/Ocean-E2E. △ Less

Submitted 30 June, 2025; v1 submitted 28 May, 2025; originally announced May 2025.

Edge Games: Cooperative Partner Selection in Network Cooperation Evolution

Authors: Hongqian Wu, Hongzhong Deng, Jichao Li, Chengxing Wu, Zhuoting Yu, Haidong Zhang, Gaoxin Qi

Abstract: The phenomenon of group cooperation constitutes a fundamental mechanism underlying various social and biological systems. Complex networks provide a structural framework for group interactions, where individuals can not only obtain information from their neighbors but also choose neighbors as cooperative partners. However, traditional evolutionary game theory models, where nodes are the game playe… ▽ More The phenomenon of group cooperation constitutes a fundamental mechanism underlying various social and biological systems. Complex networks provide a structural framework for group interactions, where individuals can not only obtain information from their neighbors but also choose neighbors as cooperative partners. However, traditional evolutionary game theory models, where nodes are the game players, are not convenient for directly choosing cooperative partners. Here, we exchange the roles of nodes and edges and innovatively propose the "edge game" model, using edges in complex networks as virtual game players for group games. Theoretical analysis and simulation experiments show that by configuring a synergy factor (r) that satisfies the "moderate cooperation" condition, a stable cooperative structure can be achieved for any network at the evolutionary equilibrium. Specifically, when there is no constraint on the number of cooperators per node, the condition for the evolution of cooperation in the network is r > kmax, where kmax is the maximum degree of the nodes. When there is a threshold constraint, in nearest-neighbor coupled networks (with degree k), the condition for "moderate cooperation" is k < r < 2k. In heterogeneous networks, a variable synergy factor scheme is adopted, where the synergy factor for each game group (rx) is defined to be proportional to the degree of the central node (kx) in the group (rx = n-fold*kx), "moderate cooperation" can be achieved when 1 < n-fold < 2. If the value of r exceeds the range, it may lead to "excessive cooperation" with node overload. Comparing algorithm performance and time complexity, edge games demonstrate advantages over other optimization algorithms. Simple and universal, the edge game provides a new approach to addressing multi-agent cooperation problems in the era of machine intelligence. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Comments: 53 pages, 20 figures,6 tables

NeuralOM: Neural Ocean Model for Subseasonal-to-Seasonal Simulation

Authors: Yuan Gao, Ruiqi Shu, Hao Wu, Fan Xu, Yanfei Xiang, Ruijian Gou, Qingsong Wen, Xian Wu, Xiaomeng Huang

Abstract: Accurate Subseasonal-to-Seasonal (S2S) ocean simulation is critically important for marine research, yet remains challenging due to its substantial thermal inertia and extended time delay. Machine learning (ML)-based models have demonstrated significant advancements in simulation accuracy and computational efficiency compared to traditional numerical methods. Nevertheless, a significant limitation… ▽ More Accurate Subseasonal-to-Seasonal (S2S) ocean simulation is critically important for marine research, yet remains challenging due to its substantial thermal inertia and extended time delay. Machine learning (ML)-based models have demonstrated significant advancements in simulation accuracy and computational efficiency compared to traditional numerical methods. Nevertheless, a significant limitation of current ML models for S2S ocean simulation is their inadequate incorporation of physical consistency and the slow-changing properties of the ocean system. In this work, we propose a neural ocean model (NeuralOM) for S2S ocean simulation with a multi-scale interactive graph neural network to emulate diverse physical phenomena associated with ocean systems effectively. Specifically, we propose a multi-stage framework tailored to model the ocean's slowly changing nature. Additionally, we introduce a multi-scale interactive messaging module to capture complex dynamical behaviors, such as gradient changes and multiplicative coupling relationships inherent in ocean dynamics. Extensive experimental evaluations confirm that our proposed NeuralOM outperforms state-of-the-art models in S2S and extreme event simulation. The codes are available at https://github.com/YuanGao-YG/NeuralOM. △ Less

Submitted 30 June, 2025; v1 submitted 27 May, 2025; originally announced May 2025.

Turb-L1: Achieving Long-term Turbulence Tracing By Tackling Spectral Bias

Authors: Hao Wu, Yuan Gao, Ruiqi Shu, Zean Han, Fan Xu, Zhihong Zhu, Qingsong Wen, Xian Wu, Kun Wang, Xiaomeng Huang

Abstract: Accurately predicting the long-term evolution of turbulence is crucial for advancing scientific understanding and optimizing engineering applications. However, existing deep learning methods face significant bottlenecks in long-term autoregressive prediction, which exhibit excessive smoothing and fail to accurately track complex fluid dynamics. Our extensive experimental and spectral analysis of p… ▽ More Accurately predicting the long-term evolution of turbulence is crucial for advancing scientific understanding and optimizing engineering applications. However, existing deep learning methods face significant bottlenecks in long-term autoregressive prediction, which exhibit excessive smoothing and fail to accurately track complex fluid dynamics. Our extensive experimental and spectral analysis of prevailing methods provides an interpretable explanation for this shortcoming, identifying Spectral Bias as the core obstacle. Concretely, spectral bias is the inherent tendency of models to favor low-frequency, smooth features while overlooking critical high-frequency details during training, thus reducing fidelity and causing physical distortions in long-term predictions. Building on this insight, we propose Turb-L1, an innovative turbulence prediction method, which utilizes a Hierarchical Dynamics Synthesis mechanism within a multi-grid architecture to explicitly overcome spectral bias. It accurately captures cross-scale interactions and preserves the fidelity of high-frequency dynamics, enabling reliable long-term tracking of turbulence evolution. Extensive experiments on the 2D turbulence benchmark show that Turb-L1 demonstrates excellent performance: (I) In long-term predictions, it reduces Mean Squared Error (MSE) by $80.3\%$ and increases Structural Similarity (SSIM) by over $9\times$ compared to the SOTA baseline, significantly improving prediction fidelity. (II) It effectively overcomes spectral bias, accurately reproducing the full enstrophy spectrum and maintaining physical realism in high-wavenumber regions, thus avoiding the spectral distortions or spurious energy accumulation seen in other methods. △ Less

Submitted 7 June, 2025; v1 submitted 25 May, 2025; originally announced May 2025.

Direct Observation of k-Gaps in Dynamically Modulated Phononic Time Crystal

Authors: Z. Liu, X. Zhu, Z. G. Zhang, W. M. Zhang, X. Chen, Y. Q. Yang, R. W. Peng, M. Wang, J. Li, H. W. Wu

Abstract: Floquet time crystals, characterized by momentum gaps (k-gaps), have sparked intense interest across various branches of physics due to their intriguing dynamics and promising applications. Despite growing theoretical efforts, the realization and observation of phononic time crystals, especially for airborne sound, remain significant experimental challenges. In this work, we demonstrate a phononic… ▽ More Floquet time crystals, characterized by momentum gaps (k-gaps), have sparked intense interest across various branches of physics due to their intriguing dynamics and promising applications. Despite growing theoretical efforts, the realization and observation of phononic time crystals, especially for airborne sound, remain significant experimental challenges. In this work, we demonstrate a phononic time crystal by integrating discrete resonant meta-atoms into a one-dimensional acoustic waveguide, effectively creating a homogeneous, time-varying metamaterial. By dynamically modulating the effective compressibility, we experimentally observe exponential acoustic wave amplification, offering clear evidence of k-gap formation. Furthermore, we showcase the versatility of our platform by inducing momentum band folding and double k-gap phenomena via quasi-periodic temporal modulation. This flexible and reconfigurable approach not only enables the design of tailor-made resonant responses but also opens new avenues for realizing higher-dimensional phononic time crystals and exploring nontrivial topological dynamics in time-modulated media. △ Less

Submitted 30 May, 2025; v1 submitted 11 May, 2025; originally announced May 2025.

Comments: 4 figures

Temporal Effective Medium for Programmable Acoustic Metamaterials with Multiple Resonances

Authors: Xinghong Zhu, Hong-Wei Wu, Jensen Li

Abstract: We extend effective medium theory (EMT) to time-modulated, frequency-dispersive acoustic metamaterials with multiple resonances. While previous studies focused on non-dispersive or single-resonance systems, advances in programmable materials now enable precise control of time-varying responses. We derive explicit averaging rules that account for the interplay between resonant and modulation freque… ▽ More We extend effective medium theory (EMT) to time-modulated, frequency-dispersive acoustic metamaterials with multiple resonances. While previous studies focused on non-dispersive or single-resonance systems, advances in programmable materials now enable precise control of time-varying responses. We derive explicit averaging rules that account for the interplay between resonant and modulation frequencies. When resonant frequencies are much lower than the modulation frequency, modulating the resonant strength yields the temporal average of monopolar susceptibility \c{hi}, while modulating the resonant frequency results in the average of 1/\c{hi}, applied per resonance mode. In hybrid cases, high-frequency resonances (relative to modulation) can be renormalized as a non-dispersive background before averaging the rest. This generalized temporal EMT offers a unified framework for designing compact, topologically robust, and non-Hermitian acoustic devices, leveraging the possible programmability of time-dependent material parameters in future. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Comments: 17 pages, 5 figures, 1 table

Tailoring ultra-high-order optical skyrmions

Authors: Xinji Zeng, Jing Fang, Haijun Wu, Jinwen Wang, Yun Chen, Yongkun Zhou, Xin Yang, Chengyuan Wang, Dong Wei, Haixia Chen, Hong Gao, Yijie Shen

Abstract: Skyrmions, as quasiparticles with topological spin textures, has recently garnered great attention for both condensed matter and structured wave communities, promising next-generation large-density robust information technologies. However, a big challenge to this end is that the generation of high-order skyrmions is elusive in any physical systems. Here, we propose the method to create and control… ▽ More Skyrmions, as quasiparticles with topological spin textures, has recently garnered great attention for both condensed matter and structured wave communities, promising next-generation large-density robust information technologies. However, a big challenge to this end is that the generation of high-order skyrmions is elusive in any physical systems. Here, we propose the method to create and control ultra-high-order skyrmions (skyrmion number up to $400^{th}$) in a structured light system. We also experimentally control the topological state transition between bimeron and skyrmion, arbitrarily tailor the transverse size of an arbitrary-order skyrmionic beam independent of topological number, and ensure the topological stability upon propagation. Our work offers solutions for topologically resilient communication and memory with much enhanced information capacity. △ Less

Submitted 6 May, 2025; originally announced May 2025.

Comments: 13 pages, 9 figures

Prototyping and Test of the "Canis" HTS Planar Coil Array for Stellarator Field Shaping

Authors: D. Nash, D. A. Gates, W. S. Walsh, M. Slepchenkov, D. Guan, A. D. Cate, B. Chen, M. Dickerson, W. Harris, U. Khera, M. Korman, S. Srinivasan, C. P. S. Swanson, A. van Riel, R. H. Wu, A. S. Basurto, B. Berzin, E. Brown, C. Chen, T. Ikuss, W. B. Kalb, C. Khurana, B. D. Koehne, T. G. Kruger, S. Noronha , et al. (8 additional authors not shown)

Abstract: Thea Energy, Inc. is currently developing the "Eos" planar coil stellarator, the Company's first integrated fusion system capable of forming optimized stellarator magnetic fields without complex and costly modular coils. To demonstrate the field shaping capability required to enable Eos, Thea Energy designed, constructed, and tested the "Canis" 3x3 array of high-temperature superconductor (HTS) pl… ▽ More Thea Energy, Inc. is currently developing the "Eos" planar coil stellarator, the Company's first integrated fusion system capable of forming optimized stellarator magnetic fields without complex and costly modular coils. To demonstrate the field shaping capability required to enable Eos, Thea Energy designed, constructed, and tested the "Canis" 3x3 array of high-temperature superconductor (HTS) planar shaping coils after successfully demonstrating a single shaping coil prototype. Through the Canis 3x3 magnet array program, Thea Energy manufactured nine HTS shaping coils and developed the cryogenic test and measurement infrastructure necessary to validate the array's performance. Thea Energy operated the array at 20 K, generating several stellarator-relevant magnetic field shapes and demonstrating closed loop field control of the superconducting magnets to within 1% of predicted field, a margin of error acceptable for operation of an integrated stellarator. The Canis magnet array test campaign provides a proof of concept for HTS planar shaping coils as a viable approach to confining stellarator plasmas. △ Less

Submitted 19 March, 2025; originally announced March 2025.

Comments: 13 pages, 20 figures

Pushing DSP-Free Coherent Interconnect to the Last Inch by Optically Analog Signal Processing

Authors: Mingming Zhang, Haoze Du, Xuefeng Wang, Junda Chen, Weihao Li, Zihe Hu, Yizhao Chen, Can Zhao, Hao Wu, Jiajun Zhou, Siyang Liu, Siqi Yan, Ming Tang

Abstract: To support the boosting interconnect capacity of the AI-related data centers, novel techniques enabled high-speed and low-cost optics are continuously emerging. When the baud rate approaches 200 GBaud per lane, the bottle-neck of traditional intensity modulation direct detection (IM-DD) architectures becomes increasingly evident. The simplified coherent solutions are widely discussed and considere… ▽ More To support the boosting interconnect capacity of the AI-related data centers, novel techniques enabled high-speed and low-cost optics are continuously emerging. When the baud rate approaches 200 GBaud per lane, the bottle-neck of traditional intensity modulation direct detection (IM-DD) architectures becomes increasingly evident. The simplified coherent solutions are widely discussed and considered as one of the most promising candidates. In this paper, a novel coherent architecture based on self-homodyne coherent detection and optically analog signal processing (OASP) is demonstrated. Proved by experiment, the first DSP-free baud-rate sampled 64-GBaud QPSK/16-QAM receptions are achieved, with BERs of 1e-6 and 2e-2, respectively. Even with 1-km fiber link propagation, the BER for QPSK reception remains at 3.6e-6. When an ultra-simple 1-sps SISO filter is utilized, the performance degradation of the proposed scheme is less than 1 dB compared to legacy DSP-based coherent reception. The proposed results pave the way for the ultra-high-speed coherent optical interconnections, offering high power and cost efficiency. △ Less

Submitted 14 March, 2025; originally announced March 2025.

Impacts of Physical-Layer Information on Epidemic Spreading in Cyber-Physical Networked Systems

Authors: Xianglai Yuan, Yichao Yao, Han Wu, Minyu Feng

Abstract: Since Granell et al. proposed a multiplex network for information and epidemic propagation, researchers have explored how information propagation affects epidemic dynamics. However, the role of individuals acquiring information through physical interactions has received relatively less attention. In this work, we introduce a novel source of information: physical layer information, and derive the e… ▽ More Since Granell et al. proposed a multiplex network for information and epidemic propagation, researchers have explored how information propagation affects epidemic dynamics. However, the role of individuals acquiring information through physical interactions has received relatively less attention. In this work, we introduce a novel source of information: physical layer information, and derive the epidemic outbreak threshold using the Microscopic Markov Chain Approach (MMCA). Our simulation results indicate that the outbreak threshold derived from the MMCA is consistent with the Monte Carlo (MC) simulation results, thereby confirming the accuracy of the theoretical model. Furthermore, we find that the physical-layer information effectively increases the population's awareness density and the infection threshold $β_c$, while reducing the population's infection density, thereby suppressing the spreading of the epidemic. Another interesting finding is that when the density of 2-simplex information is relatively high, the 2-simplex plays a role similar to pairwise interaction, significantly enhancing the population's awareness density and effectively preventing large-scale epidemic outbreaks. In addition, our model works equally well for cyber physical systems with similar interaction mechanisms, while we simulate and validate it in a real grid system. △ Less

Submitted 9 March, 2025; originally announced March 2025.

Raman Forbidden Layer-Breathing Modes in Layered Semiconductor Materials Activated by Phonon and Optical Cavity Effects

Authors: Miao-Ling Lin, Jiang-Bin Wu, Xue-Lu Liu, Tao Liu, Rui Mei, Heng Wu, Shan Guan, Jia-Liang Xie, Jun-Wei Luo, Lin-Wang Wang, Andrea C. Ferrari, Ping-Heng Tan

Abstract: We report Raman forbidden layer-breathing modes (LBMs) in layered semiconductor materials (LSMs). The intensity distribution of all observed LBMs depends on layer number, incident light wavelength and refractive index mismatch between LSM and underlying substrate. These results are understood by a Raman scattering theory via the proposed spatial interference model, where the naturally occurring op… ▽ More We report Raman forbidden layer-breathing modes (LBMs) in layered semiconductor materials (LSMs). The intensity distribution of all observed LBMs depends on layer number, incident light wavelength and refractive index mismatch between LSM and underlying substrate. These results are understood by a Raman scattering theory via the proposed spatial interference model, where the naturally occurring optical and phonon cavities in LSMs enable spatially coherent photon-phonon coupling mediated by the corresponding one-dimensional periodic electronic states. Our work reveals the spatial coherence of photon and phonon fields on the phonon excitation via photon/phonon cavity engineering. △ Less

Submitted 7 March, 2025; originally announced March 2025.

Comments: Please check the initial version on the website of Research Square at https://doi.org/10.21203/rs.3.rs-4156671/v1

Journal ref: Physical Review Letters 134, 096903 (2025)

Exploring Dual-Iron Atomic Catalysts for Efficient Nitrogen Reduction: A Comprehensive Study on Structural and Electronic Optimization

Authors: Zhe Zhang, Wenxin Ma, Jiajie Qiao, Xiaoliang Wu, Shaowen Yu, Weiye Hou, Xiang Huang, Rubin Huo, Hongbo Wu, Yusong Tu

Abstract: The nitrogen reduction reaction (NRR), as an efficient and green pathway for ammonia synthesis, plays a crucial role in achieving on-demand ammonia production. This study proposes a novel design concept based on dual-iron atomic sites and nitrogen-boron co-doped graphene catalysts, exploring their high efficiency in NRR. By modulating the N and B co-doped ratios, we found that Fe2N3B@G catalyst ex… ▽ More The nitrogen reduction reaction (NRR), as an efficient and green pathway for ammonia synthesis, plays a crucial role in achieving on-demand ammonia production. This study proposes a novel design concept based on dual-iron atomic sites and nitrogen-boron co-doped graphene catalysts, exploring their high efficiency in NRR. By modulating the N and B co-doped ratios, we found that Fe2N3B@G catalyst exhibited significant activity in the adsorption and hydrogenation of N2 molecules, especially with the lowest free energy (0.32 eV) on NRR distal pathway, showing its excellent nitrogen activation capability and NRR performance. The computed electron localization function, crystal orbital Hamiltonian population, electrostatic potential map revealed that the improved NRR kinetics of Fe2N3B@G catalyst derived by N3B co-doping induced optimization of Fe-Fe electronic environment, regulation of Fe-N bond strength, and the continuous electronic support during the N2 breakage and hydrogenation. In particular, machine learning molecular dynamics (MLMD) simulations were employed to verify the high activity of Fe2N3B@G catalyst in NRR, which reveal that Fe2N3B@G effectively regulates the electron density of Fe-N bond, ensuring the smooth generation and desorption of NH3 molecules and avoiding the competition with hydrogen evolution reaction (HER). Furthermore, the determined higher HER overpotential of Fe2N3B@G catalyst can effectively inhibit the HER and enhance the selectivity toward NRR. In addition, Fe2N3B@G catalyst also showed good thermal stability by MD simulations up to 500 K, offering its feasibility in practical applications. This study demonstrates the superior performance of Fe2N3B@G in nitrogen reduction catalysis, and provides theoretical guidance for atomic catalyst design by the co-doping strategy and in-deep electronic environment modulation. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Improving the Spatial Resolution of a BOTDA Sensor Using Physics-Enhanced Deep Neural Network

Authors: Zhao Ge, Xuan Zou, Hao Wu, Weilun Wei, Chuante Wang, Ming Tang

Abstract: A high spatial resolution Brillouin Gain Spectrum (BGS) reconstruction method combining a neural network and a physical model is designed and proposed for Brillouin optical time domain analysis (BOTDA) systems. This approach achieves sub-meter spatial resolution directly from a single long pulse experimental data through self-supervised learning. To the best of our knowledge, this is the first tim… ▽ More A high spatial resolution Brillouin Gain Spectrum (BGS) reconstruction method combining a neural network and a physical model is designed and proposed for Brillouin optical time domain analysis (BOTDA) systems. This approach achieves sub-meter spatial resolution directly from a single long pulse experimental data through self-supervised learning. To the best of our knowledge, this is the first time a physical model has been used to enhance neural network models in the field of optical fiber sensing. Simulation results show that the BGS distribution reconstructed by this technique has a mean squared error (MSE) of 0.02 compared to the ideal BGSs. And the standard deviation of the extracted BFS is 0.65 MHz. Experimental results indicate that, for a 40 ns pulse BGS distribution, the proposed approach accurately reconstructs a BGS distribution with 0.5 m spatial resolution. The proposed technique demonstrates a significant advantage over results from the deconvolution algorithm and supervised learning methods. △ Less

Submitted 1 March, 2025; originally announced March 2025.

PFD: Automatically Generating Machine Learning Force Fields from Universal Models

Authors: Ruoyu Wang, Yuxiang Gao, Hongyu Wu, Zhicheng Zhong

Abstract: Universal force fields generalizable across the periodic table represent a new trend in computational materials science. However, the applications of universal force fields in material simulations are limited by their slow inference speed and the lack of first-principles accuracy. Instead of building a single model simultaneously satisfying these characteristics, a strategy that quickly generates… ▽ More Universal force fields generalizable across the periodic table represent a new trend in computational materials science. However, the applications of universal force fields in material simulations are limited by their slow inference speed and the lack of first-principles accuracy. Instead of building a single model simultaneously satisfying these characteristics, a strategy that quickly generates material-specific models from the universal model may be more feasible. Here, we propose a new workflow pattern, PFD, which automatically generates machine-learning force fields for specific materials from a pre-trained universal model through fine-tuning and distillation. By fine-tuning the pre-trained model, our PFD workflow generates force fields with first-principles accuracy while requiring one to two orders of magnitude less training data compared to traditional methods. The inference speed of the generated force field is further improved through distillation, meeting the requirements of large-scale molecular simulations. Comprehensive testing across diverse materials including complex systems such as amorphous carbon, interface, etc., reveals marked enhancements in training efficiency, which suggests the PFD workflow a practical and reliable approach for force field generation in computational material sciences. △ Less

Submitted 28 February, 2025; originally announced February 2025.

Comments: 9 pages, 9 figures

Arrival flow profile estimation and predication for urban arterials using license plate recognition data

Authors: Hao Wu, Jiarong Yao, Peize Kang, Chaopeng Tan, Yang Cai, Junjie Zhou, Edward Chung, Keshuang Tang

Abstract: Arrival flow profiles enable precise assessment of urban arterial dynamics, aiding signal control optimization. License Plate Recognition (LPR) data, with its comprehensive coverage and event-based detection, is promising for reconstructing arrival flow profiles. This paper introduces an arrival flow profile estimation and prediction method for urban arterials using LPR data. Unlike conventional m… ▽ More Arrival flow profiles enable precise assessment of urban arterial dynamics, aiding signal control optimization. License Plate Recognition (LPR) data, with its comprehensive coverage and event-based detection, is promising for reconstructing arrival flow profiles. This paper introduces an arrival flow profile estimation and prediction method for urban arterials using LPR data. Unlike conventional methods that assume traffic homogeneity and overlook detailed traffic wave features and signal timing impacts, our approach employs a time partition algorithm and platoon dispersion model to calculate arrival flow, considering traffic variations and driving behaviors using only boundary data. Shockwave theory quantifies the piecewise function between arrival flow and profile. We derive the relationship between arrival flow profiles and traffic dissipation at downstream intersections, enabling recursive calculations for all intersections. This approach allows prediction of arrival flow profiles under any signal timing schemes. Validation through simulation and empirical cases demonstrates promising performance and robustness under various conditions. △ Less

Submitted 16 February, 2025; originally announced February 2025.

WIMP Dark Matter Search using a 3.1 tonne $\times$ year Exposure of the XENONnT Experiment

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, S. R. Armbruster, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad , et al. (153 additional authors not shown)

Abstract: We report on a search for weakly interacting massive particle (WIMP) dark matter (DM) via elastic DM-xenon-nucleus interactions in the XENONnT experiment. We combine datasets from the first and second science campaigns resulting in a total exposure of $3.1\;\text{tonne}\times\text{year}$. In a blind analysis of nuclear recoil events with energies above $3.8\,\mathrm{keV_{NR}}$, we find no signific… ▽ More We report on a search for weakly interacting massive particle (WIMP) dark matter (DM) via elastic DM-xenon-nucleus interactions in the XENONnT experiment. We combine datasets from the first and second science campaigns resulting in a total exposure of $3.1\;\text{tonne}\times\text{year}$. In a blind analysis of nuclear recoil events with energies above $3.8\,\mathrm{keV_{NR}}$, we find no significant excess above background. We set new upper limits on the spin-independent WIMP-nucleon scattering cross-section for WIMP masses above $10\,\mathrm{GeV}/c^2$ with a minimum of $1.7\,\times\,10^{-47}\,\mathrm{cm^2}$ at $90\,\%$ confidence level for a WIMP mass of $30\,\mathrm{GeV}/c^2$. We achieve a best median sensitivity of $1.4\,\times\,10^{-47}\,\mathrm{cm^2}$ for a $41\,\mathrm{GeV}/c^2$ WIMP. Compared to the result from the first XENONnT science dataset, we improve our sensitivity by a factor of up to 1.8. △ Less

Submitted 25 February, 2025; originally announced February 2025.

Comments: Limits are included in the submission file

Multimode fiber based high-dimensional light analyzer

Authors: Yuxuan Xiong, Hao Wu, Mingming Zhang, Yucheng Yao, Ming Tang

Abstract: The wavelength and state of polarization (SOP) are fundamental properties of an optical field which are essential for applications in optical communications, imaging and other fields. However, it is challenging for existing spectrometers and polarimeters to measure these parameters simultaneously, resulting in reduced spatial and temporal efficiency. To overcome this limitation, we propose and dem… ▽ More The wavelength and state of polarization (SOP) are fundamental properties of an optical field which are essential for applications in optical communications, imaging and other fields. However, it is challenging for existing spectrometers and polarimeters to measure these parameters simultaneously, resulting in reduced spatial and temporal efficiency. To overcome this limitation, we propose and demonstrate a compact multimode fiber (MMF)-based high-dimensional light analyzer capable of simultaneously performing high-precision measurements of both wavelength and SOP. Core-offset launching is introduced in the MMF to reshuffle the mode coupling. A neural network named WP-Net has been designed dedicated to wavelength and SOP synchronization measurements. Physics-informed loss function based on optical prior knowledge is used to optimize the learning process. These advancements have enhanced the sensitivity, achieving a wavelength resolution of 0.045 pm and an SOP resolution of 0.0088. △ Less

Submitted 22 February, 2025; originally announced February 2025.

SMILE: a universal tool for modulated-enhanced localization microscopy to achieve minimal three-dimensional resolution

Authors: Hongfei Zhu, Yile Sun, Xinxun Yang, Enxing He, Lu Yin, Hanmeng Wu, Mingxuan Cai, Yubing Han, Renjie Zhou, Cuifang Kuang, Xu Liu

Abstract: Modulation-enhanced localization microscopy (MELM) has demonstrated significant improvements in both lateral and axial localization precision compared to conventional single-molecule localization microscopy (SMLM). However, lateral modulated illumination based MELM (MELMxy) remains fundamentally limited to two-dimensional imaging. Here we present three-dimensional Single-Molecule Modulated Illumin… ▽ More Modulation-enhanced localization microscopy (MELM) has demonstrated significant improvements in both lateral and axial localization precision compared to conventional single-molecule localization microscopy (SMLM). However, lateral modulated illumination based MELM (MELMxy) remains fundamentally limited to two-dimensional imaging. Here we present three-dimensional Single-Molecule Modulated Illumination Localization Estimator (SMILE) that synergistically integrates lateral illumination modulation with point spread function engineering. By simultaneously exploiting lateral modulation patterns and an accurate point spread function (PSF) model for 3D localization, SMILE achieves near-theoretical-minimum localization uncertainty, demonstrating an average 4-fold enhancement in lateral precision compared to conventional 3D-SMLM. Crucially, SMILE exhibits exceptional compatibility with diverse PSFs and different illumination patterns with various structures including 4Pi configurations, making it a versatile tool that can be easily adapted for different experimental setups. When integrated with 4Pi microscopy, 4Pi-SMILE shows particular promise for achieving sub-10 nm axial resolution and approaching isotropic resolution. From the simulations and proof-of-concept experiments, we verified the superiority of SMILE over 3D-SMLM and ordinary MELM. We highlight SMILE as a novel methodology and robust framework that holds great potential to significantly promote the development of MELM. △ Less

Submitted 7 May, 2025; v1 submitted 19 February, 2025; originally announced February 2025.

Super-resolution optical trapping of multiple cold atoms

Authors: Kelvin Lim, Vincent Mancois, Haijun Wu, Yijie Shen, David Wilkowski

Abstract: Arrays of optical tweezers form the backbone of neutral atoms analog and digital quantum processors. However, the inter-trap distance remains generally much larger than the size of the tweezers to avoid interference-induced trap distortions, limiting the trap density. Here, we report single-atom trapping in four super-resolved tweezers, meaning with a separation below the Sparrow diffraction limit… ▽ More Arrays of optical tweezers form the backbone of neutral atoms analog and digital quantum processors. However, the inter-trap distance remains generally much larger than the size of the tweezers to avoid interference-induced trap distortions, limiting the trap density. Here, we report single-atom trapping in four super-resolved tweezers, meaning with a separation below the Sparrow diffraction limit. The optical pattern is generated using superoscillatory phenomenon leading to subwavelength traps with full control of the trap relative phases. We investigate two sets of relative phases that impede or allow the hopping and the reshuffling of atoms. We envision that superoscillatory light structuring will bridge the gap between large-distance traps generated by tweezer arrays and short-distance traps formed with optical lattices. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Comments: 6 pages, 4 figures. SM is available upon request

Radon Removal in XENONnT down to the Solar Neutrino Level

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García , et al. (147 additional authors not shown)

Abstract: The XENONnT experiment has achieved an exceptionally low $^\text{222}$Rn activity concentration within its inner 5.9$\,$tonne liquid xenon detector of (0.90$\,\pm\,$0.01$\,$stat.$\,\pm\,$0.07 sys.)$\,μ$Bq/kg, equivalent to about 430 $^\text{222}$Rn atoms per tonne of xenon. This was achieved by active online radon removal via cryogenic distillation after stringent material selection. The achieved… ▽ More The XENONnT experiment has achieved an exceptionally low $^\text{222}$Rn activity concentration within its inner 5.9$\,$tonne liquid xenon detector of (0.90$\,\pm\,$0.01$\,$stat.$\,\pm\,$0.07 sys.)$\,μ$Bq/kg, equivalent to about 430 $^\text{222}$Rn atoms per tonne of xenon. This was achieved by active online radon removal via cryogenic distillation after stringent material selection. The achieved $^\text{222}$Rn activity concentration is five times lower than that in other currently operational multi-tonne liquid xenon detectors engaged in dark matter searches. This breakthrough enables the pursuit of various rare event searches that lie beyond the confines of the standard model of particle physics, with world-leading sensitivity. The ultra-low $^\text{222}$Rn levels have diminished the radon-induced background rate in the detector to a point where it is for the first time comparable to the solar neutrino-induced background, which is poised to become the primary irreducible background in liquid xenon-based detectors. △ Less

Submitted 25 April, 2025; v1 submitted 6 February, 2025; originally announced February 2025.

Exploration of optimized front-end readout circuit for time measurement of large-area SiPM arrays

Authors: M. X. Wang, Y. Liu, Y. Q. Tan, J. N. Tang, W. H. Wu, D. L. Xu, W. Zhi, Z. Z. Zhou

Abstract: The detector of TRopIcal DEep-sea Neutrino Telescope (TRIDENT) will use large-area silicon photomultiplier (SiPM) arrays combined with photomultiplier tubes to boost photon detection efficiency and pointing capability. An application-specific integrated circuit (ASIC) is being developed to aim at high-resolution time measurement of large-area SiPM arrays. This work researches four architectures of… ▽ More The detector of TRopIcal DEep-sea Neutrino Telescope (TRIDENT) will use large-area silicon photomultiplier (SiPM) arrays combined with photomultiplier tubes to boost photon detection efficiency and pointing capability. An application-specific integrated circuit (ASIC) is being developed to aim at high-resolution time measurement of large-area SiPM arrays. This work researches four architectures of readout circuits including different input stages (common gate stage and negative feedback common gate stage) and discriminators (two types of current discriminator and one voltage discriminator) using a 180 nm CMOS process for optimizing time resolution. The experimental measurements show that single photon time resolutions performed using Hamamatsu S13360-3050PE SiPMs are around 260 ps full width at half maximum (FWHM). A timing jitter less than 500 ps FWHM when connecting a 6x6 mm^2 SiPM array is achieved. The power consumption is less than 7 mW/channel. Additionally, a digital summation is applied to reduce the number of output interfaces. The measured performances of the ASIC cater to the TRIDENT application requirements. △ Less

Submitted 5 February, 2025; originally announced February 2025.

OneForecast: A Universal Framework for Global and Regional Weather Forecasting

Authors: Yuan Gao, Hao Wu, Ruiqi Shu, Huanshuo Dong, Fan Xu, Rui Ray Chen, Yibo Yan, Qingsong Wen, Xuming Hu, Kun Wang, Jiahao Wu, Qing Li, Hui Xiong, Xiaomeng Huang

Abstract: Accurate weather forecasts are important for disaster prevention, agricultural planning, etc. Traditional numerical weather prediction (NWP) methods offer physically interpretable high-accuracy predictions but are computationally expensive and fail to fully leverage rapidly growing historical data. In recent years, deep learning models have made significant progress in weather forecasting, but cha… ▽ More Accurate weather forecasts are important for disaster prevention, agricultural planning, etc. Traditional numerical weather prediction (NWP) methods offer physically interpretable high-accuracy predictions but are computationally expensive and fail to fully leverage rapidly growing historical data. In recent years, deep learning models have made significant progress in weather forecasting, but challenges remain, such as balancing global and regional high-resolution forecasts, excessive smoothing in extreme event predictions, and insufficient dynamic system modeling. To address these issues, this paper proposes a global-regional nested weather forecasting framework (OneForecast) based on graph neural networks. By combining a dynamic system perspective with multi-grid theory, we construct a multi-scale graph structure and densify the target region to capture local high-frequency features. We introduce an adaptive messaging mechanism, using dynamic gating units to deeply integrate node and edge features for more accurate extreme event forecasting. For high-resolution regional forecasts, we propose a neural nested grid method to mitigate boundary information loss. Experimental results show that OneForecast performs excellently across global to regional scales and short-term to long-term forecasts, especially in extreme event predictions. Codes link https://github.com/YuanGao-YG/OneForecast. △ Less

Submitted 4 June, 2025; v1 submitted 1 February, 2025; originally announced February 2025.

A Tale of Two Sides of Wafer: Physical Implementation and Block-Level PPA on Flip FET with Dual-sided Signals

Authors: Haoran Lu, Xun Jiang, Yanbang Chu, Ziqiao Xu, Rui Guo, Wanyue Peng, Yibo Lin, Runsheng Wang, Heng Wu, Ru Huang

Abstract: As the conventional scaling of logic devices comes to an end, functional wafer backside and 3D transistor stacking are consensus for next-generation logic technology, offering considerable design space extension for powers, signals or even devices on the wafer backside. The Flip FET (FFET), a novel transistor architecture combining 3D transistor stacking and fully functional wafer backside, was re… ▽ More As the conventional scaling of logic devices comes to an end, functional wafer backside and 3D transistor stacking are consensus for next-generation logic technology, offering considerable design space extension for powers, signals or even devices on the wafer backside. The Flip FET (FFET), a novel transistor architecture combining 3D transistor stacking and fully functional wafer backside, was recently proposed. With symmetric dual-sided standard cell design, the FFET can deliver around 12.5% cell area scaling and faster but more energy-efficient libraries beyond other stacked transistor technologies such as CFET. Besides, thanks to the novel cell design with dual-sided pins, the FFET supports dual-sided signal routing, delivering better routability and larger backside design space. In this work, we demonstrated a comprehensive FFET evaluation framework considering physical implementation and block-level power-performance-area (PPA) assessment for the first time, in which key functions are dual-sided routing and dual-sided RC extraction. A 32-bit RISC-V core was used for the evaluation here. Compared to the CFET with single-sided signals, the FFET with single-sided signals achieved 23.3% post-P&R core area reduction, 25.0% higher frequency and 11.9% lower power at the same utilization, and 16.0 % higher frequency at the same core area. Meanwhile, the FFET supports dual-sided signals, which can further benefit more from flexible allocation of cell input pins on both sides. By optimizing the input pin density and BEOL routing layer number on each side, 10.6% frequency gain was realized without power degradation compared to the one with single-sided signal routing. Moreover, the routability and power efficiency of FFET barely degrades even with the routing layer number reduced from 12 to 5 on each side, validating the great space for cost-friendly design enabled by FFET. △ Less

Submitted 25 January, 2025; originally announced January 2025.

Comments: Accepted by DATE 2025

Journal ref: Proc. of DATE 2025

Optical skyrmion lattices accelerating in free space

Authors: Haijun Wu, Weijie Zhou, Zhihan Zhu, Yijie Shen

Abstract: Generation and propagation of optical skyrmions provide a versatile plalform for topologically nontrivial optical informatics and light-matter interactions, but their acceleration along curved trajectories is to be studied. In this study, we experimentally demonstrate the first accelerating skyrmion lattices conveyed by Airy structured light, characterized by topologically stable skyrmion textures… ▽ More Generation and propagation of optical skyrmions provide a versatile plalform for topologically nontrivial optical informatics and light-matter interactions, but their acceleration along curved trajectories is to be studied. In this study, we experimentally demonstrate the first accelerating skyrmion lattices conveyed by Airy structured light, characterized by topologically stable skyrmion textures with self-acceleration along parabolic trajectories. We show that the skyrmion unit cell can maintain a Skyrme number $|N_\text{sk}|>0.9$ within a propagation range of $\pm1.22\ z_R$ upon parabolic acceleration. Notably, the meron structure remains $|N_\text{sk}|$ stable within $0.5\pm0.02$ over a significantly extended range of $\pm3.06\ z_R$. Our work provides a new potential carrier for topologically robust information distribution, particle sorting and manipulation. △ Less

Submitted 8 January, 2025; originally announced January 2025.

Cavity-QED Simulation of a Maser beyond the Mean-Field Approximation

Authors: Xinpeng Shu, Yining Jiang, Hao Wu, Mark Oxborrow

Abstract: We here introduce a method for simulating, quantum mechanically, the dynamics of a maser where the strength of the magnetic field of the microwave mode being amplified by stimulated emission varies over the volume of the maser's spatially extended gain medium. This is very often the case in real systems. Our method generalizes the well-known Tavis-Cummings (T-C) model of cavity quantum electrodyna… ▽ More We here introduce a method for simulating, quantum mechanically, the dynamics of a maser where the strength of the magnetic field of the microwave mode being amplified by stimulated emission varies over the volume of the maser's spatially extended gain medium. This is very often the case in real systems. Our method generalizes the well-known Tavis-Cummings (T-C) model of cavity quantum electrodynamics (QED) to encompass quantum emitters whose coupling strengths to the maser's amplified mode vary over a distribution that can be accurately determined using an electromagnetic-field solver applied to the maser cavity's geometry and composition. We then solve our generalized T-C model to second order in cumulant expansion using publicly available Python-based software. We apply our methodology to a specific, experimentally measured maser based on an optically pumped crystal of pentacene-doped para-terphenyl. We demonstrate that certain distinct quantum-mechanical features exhibited by this maser's dynamics, most notably the observation of Rabi-like flopping associated with the generation of spin-photon Dicke states, can be accurately reproduced using our numerically solved model. The equivalent simpler model, that invokes the mean-field approximation, fails to do so. By constructing then solving for artificial (perfectly Gaussian) distributions, we go on to explore how the performance of this type of maser is affected by the spread in spin-photon coupling strengths. Our methodology thereby enables the maser's anatomy to be more rationally engineered. △ Less

Submitted 30 December, 2024; originally announced December 2024.

Comments: 10 pages, 5 figures

Field-free current-induced magnetization switching of a room temperature van der Waals magnet for neuromorphic computing

Authors: Chenxi Zhou, Zhe Guo, Qifeng Li, Gaojie Zhang, Hao Wu, Jinsen Chen, Rongxin Li, Shuai Zhang, Cuimei Cao, Rui Xiong, Haixin Chang, Long You

Abstract: Spin orbit torque (SOT) has become a promising approach to efficiently manipulate the magnetization switching in spintronic devices. As a main factor to impact the device performance, the high quality interface is essentially desired, which can be readily acquired by using the two-dimensional (2D) van der Waals (vdW) materials. Recently, a 2D ferromagnetic material Fe3GaTe2 has been discovered to… ▽ More Spin orbit torque (SOT) has become a promising approach to efficiently manipulate the magnetization switching in spintronic devices. As a main factor to impact the device performance, the high quality interface is essentially desired, which can be readily acquired by using the two-dimensional (2D) van der Waals (vdW) materials. Recently, a 2D ferromagnetic material Fe3GaTe2 has been discovered to possess the above-room-temperature Curie temperature and strong perpendicular magnetic anisotropy (PMA), providing an excellent candidate to build spintronic devices. On the other hand, an external magnetic field is necessary for the SOT-driven deterministic switching of perpendicular magnetization, which has become a block for the real applications. Here, we realize the field-free SOT switching of Fe3GaTe2 at room temperature based on the Fe3GaTe2/MnPt heterostructure. In addition, inspired by the superiority of 2D materials in 3D heterogeneous integration, we explore the potential of our device in the computing in memory (CIM). With the application of the current pulses, the gradual switching of our device at zero field imitates the function of artificial synapse in the convolutional neural network (CNN), achieving a high accuracy (~92.8%) pattern recognition. Our work proposes a feasible solution for field-free SOT switching in 2D vdW spintronic devices, which paves the way for applications in magnetic memory and neuromorphic computing. △ Less

Submitted 24 December, 2024; originally announced December 2024.

Comments: 18 pages, 4 figures

Optomechanical dark-mode-breaking cooling

Authors: Yan Cao, Cheng Yang, Jiteng Sheng, Haibin Wu

Abstract: Optomechanical cooling of multiple degenerate mechanical modes is prevented by the mechanical dark mode due to destructive interference. Here we report the first experimental demonstration of simultaneous cooling of two near-degenerate mechanical modes by breaking the mechanical dark mode in a two-membrane cavity optomechanical system. The dark mode is generated as the system passes the exceptiona… ▽ More Optomechanical cooling of multiple degenerate mechanical modes is prevented by the mechanical dark mode due to destructive interference. Here we report the first experimental demonstration of simultaneous cooling of two near-degenerate mechanical modes by breaking the mechanical dark mode in a two-membrane cavity optomechanical system. The dark mode is generated as the system passes the exceptional point of the antiparity-time symmetric scheme. By introducing a second cavity mode for the additional dissipative channel, the dark mode is broken and the total phonon number is reduced by more than an order of magnitude below the dark mode cooling limit. Owing to the flexible tunability of the optomechanical coupling rates of such a four-mode coupled system, the optimized cooling efficiency can be achieved by investigating different parameter ranges. Our results provide an important step towards the ground state cooling and entanglement among multiple degenerate mechanical resonators. △ Less

Submitted 20 December, 2024; originally announced December 2024.

Improved Forecasts of Global Extreme Marine Heatwaves Through a Physics-guided Data-driven Approach

Authors: Ruiqi Shu, Hao Wu, Yuan Gao, Fanghua Xu, Ruijian Gou, Xiaomeng Huang

Abstract: The unusually warm sea surface temperature events known as marine heatwaves (MHWs) have a profound impact on marine ecosystems. Accurate prediction of extreme MHWs has significant scientific and financial worth. However, existing methods still have certain limitations, especially in the most extreme MHWs. In this study, to address these issues, based on the physical nature of MHWs, we created a no… ▽ More The unusually warm sea surface temperature events known as marine heatwaves (MHWs) have a profound impact on marine ecosystems. Accurate prediction of extreme MHWs has significant scientific and financial worth. However, existing methods still have certain limitations, especially in the most extreme MHWs. In this study, to address these issues, based on the physical nature of MHWs, we created a novel deep learning neural network that is capable of accurate 10-day MHW forecasting. Our framework significantly improves the forecast ability of extreme MHWs through two specially designed modules inspired by numerical models: a coupler and a probabilistic data argumentation. The coupler simulates the driving effect of atmosphere on MHWs while the probabilistic data argumentation approaches significantly boost the forecast ability of extreme MHWs based on the idea of ensemble forecast. Compared with traditional numerical prediction, our framework has significantly higher accuracy and requires fewer computational resources. What's more, explainable AI methods show that wind forcing is the primary driver of MHW evolution and reveal its relation with air-sea heat exchange. Overall, our model provides a framework for understanding MHWs' driving processes and operational forecasts in the future. △ Less

Submitted 19 December, 2024; originally announced December 2024.

AI-Enabled Rapid Assembly of Thousands of Defect-Free Neutral Atom Arrays with Constant-time-overhead

Authors: Rui Lin, Han-Sen Zhong, You Li, Zhang-Rui Zhao, Le-Tian Zheng, Tai-Ran Hu, Hong-Ming Wu, Zhan Wu, Wei-Jie Ma, Yan Gao, Yi-Kang Zhu, Zhao-Feng Su, Wan-Li Ouyang, Yu-Chen Zhang, Jun Rui, Ming-Cheng Chen, Chao-Yang Lu, Jian-Wei Pan

Abstract: Assembling increasingly larger-scale defect-free optical tweezer-trapped atom arrays is essential for quantum computation and quantum simulations based on atoms. Here, we propose an AI-enabled, rapid, constant-time-overhead rearrangement protocol, and we experimentally assemble defect-free 2D and 3D atom arrays with up to 2024 atoms with a constant time cost of 60 ms. The AI model calculates the h… ▽ More Assembling increasingly larger-scale defect-free optical tweezer-trapped atom arrays is essential for quantum computation and quantum simulations based on atoms. Here, we propose an AI-enabled, rapid, constant-time-overhead rearrangement protocol, and we experimentally assemble defect-free 2D and 3D atom arrays with up to 2024 atoms with a constant time cost of 60 ms. The AI model calculates the holograms for real-time atom rearrangement. With precise controls over both position and phase, a high-speed spatial light modulator moves all the atoms simultaneously. This protocol can be readily used to generate defect-free arrays of tens of thousands of atoms with current technologies, and become a useful toolbox for quantum error correction. △ Less

Submitted 19 December, 2024; originally announced December 2024.

Generating Unseen Nonlinear Evolution in Sea Surface Temperature Using a Deep Learning-Based Latent Space Data Assimilation Framework

Authors: Qingyu Zheng, Guijun Han, Wei Li, Lige Cao, Gongfu Zhou, Haowen Wu, Qi Shao, Ru Wang, Xiaobo Wu, Xudong Cui, Hong Li, Xuan Wang

Abstract: Advances in data assimilation (DA) methods have greatly improved the accuracy of Earth system predictions. To fuse multi-source data and reconstruct the nonlinear evolution missing from observations, geoscientists are developing future-oriented DA methods. In this paper, we redesign a purely data-driven latent space DA framework (DeepDA) that employs a generative artificial intelligence model to c… ▽ More Advances in data assimilation (DA) methods have greatly improved the accuracy of Earth system predictions. To fuse multi-source data and reconstruct the nonlinear evolution missing from observations, geoscientists are developing future-oriented DA methods. In this paper, we redesign a purely data-driven latent space DA framework (DeepDA) that employs a generative artificial intelligence model to capture the nonlinear evolution in sea surface temperature. Under variational constraints, DeepDA embedded with nonlinear features can effectively fuse heterogeneous data. The results show that DeepDA remains highly stable in capturing and generating nonlinear evolutions even when a large amount of observational information is missing. It can be found that when only 10% of the observation information is available, the error increase of DeepDA does not exceed 40%. Furthermore, DeepDA has been shown to be robust in the fusion of real observations and ensemble simulations. In particular, this paper provides a mechanism analysis of the nonlinear evolution generated by DeepDA from the perspective of physical patterns, which reveals the inherent explainability of our DL model in capturing multi-scale ocean signals. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Comments: 31 pages, 14 figures

Formation of Fe-6.5wt%Si High Silicon Steel by Double Glow Plasma Surface Metallurgy Technology

Authors: Zhong Xu, Jun Huang, Hongyan Wu, Rui Chen, Chengyuan Zhang, Zaifeng Xu, Weixin Zhang, Lei Hu, Bin Zhang

Abstract: High silicon steel with 6.5% silicon content is the best because of its excellent magnetic properties, such as high saturation magnetization, high resistivity, low iron loss and near zero magnetostriction. High silicon steel can greatly save energy, and reduce the weight and size of electrical appliances. This has a very important application prospect for energy and aerospace industry. The high br… ▽ More High silicon steel with 6.5% silicon content is the best because of its excellent magnetic properties, such as high saturation magnetization, high resistivity, low iron loss and near zero magnetostriction. High silicon steel can greatly save energy, and reduce the weight and size of electrical appliances. This has a very important application prospect for energy and aerospace industry. The high brittleness of high silicon steel makes its production and processing very difficult. For more than 30 years, many steel companies and research institutions around the world have adopted various technical means to study the industrialization of high silicon steel, but they have not been successful . JFE-NKK steel company in Japan has realized the small batch production of high silicon steel by using SiCl4-CVD technology. However, due to the complex process, corrosion and pollution, high cost, its production scale is greatly limited. So far, large-scale production of high silicon steel is still a major challenge in the world. This paper will introduce the experimental results of successfully preparing high silicon steel by Double Glow Plasma Surface Metallurgy Technology. The process is simple and easy without any corrosion or pollution, which may provide a new way for the world to achieve large-scale production of high silicon steel. The large-scale production and wide application of high silicon steel is likely to change the pattern of the world's energy and electric power industry, save a lot of energy for mankind, and create huge economic benefits. △ Less

Submitted 16 December, 2024; originally announced December 2024.

Low-Energy Nuclear Recoil Calibration of XENONnT with a $^{88}$YBe Photoneutron Source

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Ant, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Ch, A. P. Colijn, J. Conrad , et al. (147 additional authors not shown)

Abstract: Characterizing low-energy (O(1keV)) nuclear recoils near the detector threshold is one of the major challenges for large direct dark matter detectors. To that end, we have successfully used a Yttrium-Beryllium photoneutron source that emits 152 keV neutrons for the calibration of the light and charge yields of the XENONnT experiment for the first time. After data selection, we accumulated 474 even… ▽ More Characterizing low-energy (O(1keV)) nuclear recoils near the detector threshold is one of the major challenges for large direct dark matter detectors. To that end, we have successfully used a Yttrium-Beryllium photoneutron source that emits 152 keV neutrons for the calibration of the light and charge yields of the XENONnT experiment for the first time. After data selection, we accumulated 474 events from 183 hours of exposure with this source. The expected background was $55 \pm 12$ accidental coincidence events, estimated using a dedicated 152 hour background calibration run with a Yttrium-PVC gamma-only source and data-driven modeling. From these calibrations, we extracted the light yield and charge yield for liquid xenon at our field strength of 23 V/cm between 0.5 keV$_{\rm NR}$ and 5.0 keV$_{\rm NR}$ (nuclear recoil energy in keV). This calibration is crucial for accurately measuring the solar $^8$B neutrino coherent elastic neutrino-nucleus scattering and searching for light dark matter particles with masses below 12 GeV/c$^2$. △ Less

Submitted 11 December, 2024; originally announced December 2024.

Photonic torons, topological phase transition and tunable spin monopoles

Authors: Haijun Wu, Nilo Mata-Cervera, Haiwen Wang, Zhihan Zhu, Cheng-Wei Qiu, Yijie Shen

Abstract: Creation and control of topological complex excitations play crucial roles in both fundamental physics and modern information science. Torons are a sophisticated class of 3D chiral polar topological structures with both skyrmionic quasiparticle textures and monopole point defects, so far only observed in liquid crystal nonpolar models. Here, we experimentally construct torons with the photonic spi… ▽ More Creation and control of topological complex excitations play crucial roles in both fundamental physics and modern information science. Torons are a sophisticated class of 3D chiral polar topological structures with both skyrmionic quasiparticle textures and monopole point defects, so far only observed in liquid crystal nonpolar models. Here, we experimentally construct torons with the photonic spin of vector structured light and demonstrate the topological phase transitions among diverse topological states: torons, hopfions, skyrmioniums and monopole pairs. We can also continually tune the toron's chirality and the helical spin textures of emerging monopole pairs. The birth of photonic torons and tunable monopoles opens a flexible platform for studying nontrivial light-matter interaction and topological informatics. △ Less

Submitted 10 December, 2024; originally announced December 2024.

The neutron veto of the XENONnT experiment: Results with demineralized water

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad , et al. (145 additional authors not shown)

Abstract: Radiogenic neutrons emitted by detector materials are one of the most challenging backgrounds for the direct search of dark matter in the form of weakly interacting massive particles (WIMPs). To mitigate this background, the XENONnT experiment is equipped with a novel gadolinium-doped water Cherenkov detector, which encloses the xenon dual-phase time projection chamber (TPC). The neutron veto (NV)… ▽ More Radiogenic neutrons emitted by detector materials are one of the most challenging backgrounds for the direct search of dark matter in the form of weakly interacting massive particles (WIMPs). To mitigate this background, the XENONnT experiment is equipped with a novel gadolinium-doped water Cherenkov detector, which encloses the xenon dual-phase time projection chamber (TPC). The neutron veto (NV) tags neutrons via their capture on gadolinium or hydrogen, which release $γ$-rays that are subsequently detected as Cherenkov light. In this work, we present the key features and the first results of the XENONnT NV when operated with demineralized water in the initial phase of the experiment. Its efficiency for detecting neutrons is $(82\pm 1)\,\%$, the highest neutron detection efficiency achieved in a water Cherenkov detector. This enables a high efficiency of $(53\pm 3)\,\%$ for the tagging of WIMP-like neutron signals, inside a tagging time window of $250\,\mathrm{μs}$ between TPC and NV, leading to a livetime loss of $1.6\,\%$ during the first science run of XENONnT. △ Less

Submitted 18 December, 2024; v1 submitted 6 December, 2024; originally announced December 2024.

Scaling Particle Collision Data Analysis

Authors: Hengkui Wu, Panpan Chi, Yongfeng Zhu, Liujiang Liu, Shuyang Hu, Yuexin Wang, Chen Zhou, Qihao Wang, Yingsi Xin, Bruce Liu, Dahao Liang, Xinglong Jia, Manqi Ruan

Abstract: For decades, researchers have developed task-specific models to address scientific challenges across diverse disciplines. Recently, large language models (LLMs) have shown enormous capabilities in handling general tasks; however, these models encounter difficulties in addressing real-world scientific problems, particularly in domains involving large-scale numerical data analysis, such as experimen… ▽ More For decades, researchers have developed task-specific models to address scientific challenges across diverse disciplines. Recently, large language models (LLMs) have shown enormous capabilities in handling general tasks; however, these models encounter difficulties in addressing real-world scientific problems, particularly in domains involving large-scale numerical data analysis, such as experimental high energy physics. This limitation is primarily due to BPE tokenization's inefficacy with numerical data. In this paper, we propose a task-agnostic architecture, BBT-Neutron, which employs a binary tokenization method to facilitate pretraining on a mixture of textual and large-scale numerical experimental data. We demonstrate the application of BBT-Neutron to Jet Origin Identification (JoI), a critical categorization challenge in high-energy physics that distinguishes jets originating from various quarks or gluons. Our results indicate that BBT-Neutron achieves comparable performance to state-of-the-art task-specific JoI models. Furthermore, we examine the scaling behavior of BBT-Neutron's performance with increasing data volume, suggesting the potential for BBT-Neutron to serve as a foundational model for particle physics data analysis, with possible extensions to a broad spectrum of scientific computing applications for Big Science experiments, industrial manufacturing and spacial computing. The project code is available at https://github.com/supersymmetry-technologies/bbt-neutron. △ Less

Submitted 9 December, 2024; v1 submitted 28 November, 2024; originally announced December 2024.

A Novel Flow-induced Motion Energy Harvesting with Coupled Mechanism of Time-varying Stiffness and Passive Turbulence Control

Authors: Yongxi Wu, Hao Wu

Abstract: The ocean contains a substantial amount of energy, and the efficient harvesting of this energy holds significant importance. Drawing inspiration from the biomimicry of octopus tentacles, this study introduces a synergistic mechanism designed to optimize energy harvesting through flowinduced motions, integrating boundary layer modulation via passive turbulence control (PTC) with dynamic system stif… ▽ More The ocean contains a substantial amount of energy, and the efficient harvesting of this energy holds significant importance. Drawing inspiration from the biomimicry of octopus tentacles, this study introduces a synergistic mechanism designed to optimize energy harvesting through flowinduced motions, integrating boundary layer modulation via passive turbulence control (PTC) with dynamic system stiffness adjustments via time-varying stiffness (SIN & Trapezoidal patterns). The implementation of PTC facilitates global stability by managing the local instabilities caused by variable stiffness, culminating in a highly effective energy harvesting capability. Our investigations summarize the requisite conditions for peak energy harvesting efficacy, notably within the SIN 80 degrees PTC and Trapezoid/60 degrees PTC arrangements, which have been demonstrated to double the efficiency of energy harvesting with up to 57%, alongside a reduction in initial harvesting frequency and an enhancement in both instantaneous power output and vibration amplitude. Furthermore, an energy transfer characteristic map has been compiled to illustrate the mechanism coupled between boundary layer modulation and time-varying stiffness. This research not only introduces novel perspectives but also stands as a significant stride in the realm of wide band and efficient energy harvesting in the ocean. △ Less

Submitted 25 November, 2024; originally announced November 2024.

Comments: 36 pages

On the H-atom abstractions from C1-C4 alcohols, aldehydes, and ethers by NO2: ab initio and comprehensive kinetic modeling

Authors: Hongqing Wu^, Ruoyue Tang^, Yuxin Dong, Xinrui Ren, Mingrui Wang, Ting Zhang, Hongjie Zhang, Guangyuan Feng, Song Cheng

Abstract: As crucial additives and intermediate, alcohols, ethers, and aldehydes play a significant role in the combustion process. However, the chemistry of NOXhydrocarbon interactions and the rate rules governing these interactions remain largely unexplored in this combustion system. To address this gap, this study provides a comprehensive investigation of H-atom abstraction by NO2 from C1-C4 alcohols, al… ▽ More As crucial additives and intermediate, alcohols, ethers, and aldehydes play a significant role in the combustion process. However, the chemistry of NOXhydrocarbon interactions and the rate rules governing these interactions remain largely unexplored in this combustion system. To address this gap, this study provides a comprehensive investigation of H-atom abstraction by NO2 from C1-C4 alcohols, aldehydes and ethers that leads to the formation of 3 HNO2 isomers (i.e., transHONO, HNO2, and cisHONO), encompassing 9 hydrocarbons and 45 reactions. Utilizing the DLPNO CCSD(T)cc pVDZ M06 2X 6 311g d,p method, the electronic structures, single point energies, C H bond dissociation energies and 1 D hindered rotor potentials of the reactants, transition states, complexes and products in each reaction are computed. Adding these H atom abstractions to the chemical kinetic model improves the model reactivity and advances the ignition, as indicated by the reduction in ignition delay time for species that initially lacked these reactions. Further sensitivity and flux analyses highlight the crucial role of H atom abstraction by NO2. The findings underscore the importance of accurately incorporating these kinetic parameters into newly developed chemical models for alcohols, aldehydes, and ethers. Additionally, the study highlights the need for future experimental efforts to investigate the effects of NO2 on the combustion systems of these compounds. △ Less

Submitted 14 November, 2024; originally announced November 2024.

Comments: 52 pages

Spatiotemporal Superfocusing

Authors: Qianru Yang, Haotian Wu, Hao Hu, F. J. García-Vidal, Guangwei Hu, Yu Luo

Abstract: Superfocusing confines light within subwavelength structures, breaking the diffraction limit. Structures with spatial singularities, such as metallic cones, are crucial to enable nanoscale focusing, leading to significant advancements in nanophotonics, sensing, and imaging. Here, we exploit the spatiotemporal analogue of the wedge structure, i.e. a dielectric medium sandwiched between two sublumin… ▽ More Superfocusing confines light within subwavelength structures, breaking the diffraction limit. Structures with spatial singularities, such as metallic cones, are crucial to enable nanoscale focusing, leading to significant advancements in nanophotonics, sensing, and imaging. Here, we exploit the spatiotemporal analogue of the wedge structure, i.e. a dielectric medium sandwiched between two subluminal interfaces with distinct velocities, to focus propagating waves beyond the diffraction limit, achieving spatiotemporal superfocusing. Within this structure, an incident pulse undergoes continuous spatial and temporal compression due to Doppler effects, which accumulates and results in an extreme focusing as it approaches the spatiotemporal vertex. Remarkably, unlike the field localization in conventional superfocusing, the compressed light in spatiotemporal wedges experiences significant amplification and then couple to the far field in free space. Our findings represent an indispensable paradigm for extreme concentration and amplification of propagating waves in space-time dimensions. △ Less

Submitted 12 November, 2024; originally announced November 2024.

Comments: 18 pages, 5 figures

Spintwistronics: Photonic bilayer topological lattices tuning extreme spin-orbit interactions

Authors: Peng Shi, Xinxin Gou, Qiang Zhang, Weiyu Wei, Haijun Wu, Songze Li, Zhihan Zhu, Yijie Shen, Xiaocong Yuan

Abstract: Twistronics, the manipulation of Moiré superlattices via the twisting of two layers of two-dimensional (2D) materials to control diverse and nontrivial properties, has recently revolutionized the condensed matter and materials physics. Here, we introduce the principles of twistronics to spin photonics, coining this emerging field spintwistronics. In spintwistronics, instead of 2D materials, the tw… ▽ More Twistronics, the manipulation of Moiré superlattices via the twisting of two layers of two-dimensional (2D) materials to control diverse and nontrivial properties, has recently revolutionized the condensed matter and materials physics. Here, we introduce the principles of twistronics to spin photonics, coining this emerging field spintwistronics. In spintwistronics, instead of 2D materials, the two layers consist of photonic topological spin lattices on a surface plasmonic polariton (SPP) platform. Each 2D SPP wave supports the construction of topological lattices formed by photonic spins with stable skyrmion topology governed by rotational symmetry. By introducing spintwistronics into plasmonics, we demonstrate theoretically and experimentally that two layers of photonic spin lattices can produce Moiré spin superlattices at specific magic angles. These superlattices, modulated periodically by the quantum number of total angular momentum, exhibit novel properties-including new quasiparticle topologies, multiple fractal patterns, extremely slow-light control, and more-that cannot be achieved in conventional plasmonic systems. As a result, they open up multiple degrees of freedom for practical applications in quantum information, optical data storage and chiral light-matter interactions. △ Less

Submitted 11 November, 2024; v1 submitted 1 November, 2024; originally announced November 2024.

Comments: 4 figures

Generalized coherent wave control at dynamic interfaces

Authors: Youxiu Yu, Dongliang Gao, Yukun Yang, Liangliang Liu, Zhuo Li, Qianru Yang, Haotian Wu, Linyang Zou, Xiao Lin, Jiang Xiong, Songyan Hou, Lei Gao, Hao Hu

Abstract: Coherent wave control is of key importance across a broad range of fields such as electromagnetics, photonics, and acoustics. It enables us to amplify or suppress the outgoing waves via engineering amplitudes and phases of multiple incidences. However, within a purely spatially (temporally) engineered medium, coherent wave control requires the frequency of the associated incidences to be identical… ▽ More Coherent wave control is of key importance across a broad range of fields such as electromagnetics, photonics, and acoustics. It enables us to amplify or suppress the outgoing waves via engineering amplitudes and phases of multiple incidences. However, within a purely spatially (temporally) engineered medium, coherent wave control requires the frequency of the associated incidences to be identical (opposite). In this work, we break this conventional constraint by generalizing coherent wave control into a spatiotemporally engineered medium, i.e., the system featuring a dynamic interface. Owing to the broken translational symmetry in space and time, both the subluminal and superluminal interfaces allow interference between scattered waves regardless of their different frequencies and wavevectors. Hence, one can flexibly eliminate the backward- or forward-propagating waves scattered from the dynamic interfaces by controlling the incident amplitudes and phases. Our work not only presents a generalized way for reshaping arbitrary waveforms but also provides a promising paradigm to generate ultrafast pulses using low-frequency signals. We have also implemented suppression of forward-propagating waves in microstrip transmission lines with fast photodiode switches. △ Less

Submitted 1 November, 2024; originally announced November 2024.

Momentum flatband and superluminal propagation in a photonic time Moiré superlattice

Authors: Linyang Zou, Hao Hu, Haotian Wu, Yang Long, Yidong Chong, Baile Zhang, Yu Luo

Abstract: Flat bands typically describe energy bands whose energy dispersion is entirely or almost entirely degenerate. One effective method to form flat bands is by constructing Moiré superlattices. Recently, there has been a shift in perspective regarding the roles of space (momentum) and time (energy) in a lattice, with the concept of photonic time crystals that has sparked discussions on momentum disper… ▽ More Flat bands typically describe energy bands whose energy dispersion is entirely or almost entirely degenerate. One effective method to form flat bands is by constructing Moiré superlattices. Recently, there has been a shift in perspective regarding the roles of space (momentum) and time (energy) in a lattice, with the concept of photonic time crystals that has sparked discussions on momentum dispersion such as the presence of a bandgap in momentum. Here we propose a photonic time moiré superlattice achieved by overlaying two photonic time crystals with different periods. The resulting momentum bandgap of this superlattice supports isolated momentum bands that are nearly independent of energy, which we refer to as momentum flat bands. Unlike energy flat bands, which have zero group velocity, momentum flat bands exhibit infinitely large group velocity across a broad frequency range. Unlike previous optical media supporting broadband superluminal propagation based on gain, the effective refractive index of the momentum flat bands is real-valued, leading to more stabilized superluminal pulse propagation. △ Less

Submitted 6 November, 2024; v1 submitted 31 October, 2024; originally announced November 2024.

Comments: 6 pages, 4 figures

Neutrinoless Double Beta Decay Sensitivity of the XLZD Rare Event Observatory

Authors: XLZD Collaboration, J. Aalbers, K. Abe, M. Adrover, S. Ahmed Maouloud, D. S. Akerib, A. K. Al Musalhi, F. Alder, L. Althueser, D. W. P. Amaral, C. S. Amarasinghe, A. Ames, B. Andrieu, N. Angelides, E. Angelino, B. Antunovic, E. Aprile, H. M. Araújo, J. E. Armstrong, M. Arthurs, M. Babicz, D. Bajpai, A. Baker, M. Balzer, J. Bang , et al. (419 additional authors not shown)

Abstract: The XLZD collaboration is developing a two-phase xenon time projection chamber with an active mass of 60 to 80 t capable of probing the remaining WIMP-nucleon interaction parameter space down to the so-called neutrino fog. In this work we show that, based on the performance of currently operating detectors using the same technology and a realistic reduction of radioactivity in detector materials,… ▽ More The XLZD collaboration is developing a two-phase xenon time projection chamber with an active mass of 60 to 80 t capable of probing the remaining WIMP-nucleon interaction parameter space down to the so-called neutrino fog. In this work we show that, based on the performance of currently operating detectors using the same technology and a realistic reduction of radioactivity in detector materials, such an experiment will also be able to competitively search for neutrinoless double beta decay in $^{136}$Xe using a natural-abundance xenon target. XLZD can reach a 3$σ$ discovery potential half-life of 5.7$\times$10$^{27}$ yr (and a 90% CL exclusion of 1.3$\times$10$^{28}$ yr) with 10 years of data taking, corresponding to a Majorana mass range of 7.3-31.3 meV (4.8-20.5 meV). XLZD will thus exclude the inverted neutrino mass ordering parameter space and will start to probe the normal ordering region for most of the nuclear matrix elements commonly considered by the community. △ Less

Submitted 30 April, 2025; v1 submitted 23 October, 2024; originally announced October 2024.

Comments: 29 pages, 7 figures

Journal ref: J. Phys. G: Nucl. Part. Phys. 52 (2025) 045102

The XLZD Design Book: Towards the Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics

Authors: XLZD Collaboration, J. Aalbers, K. Abe, M. Adrover, S. Ahmed Maouloud, D. S. Akerib, A. K. Al Musalhi, F. Alder, L. Althueser, D. W. P. Amaral, C. S. Amarasinghe, A. Ames, B. Andrieu, N. Angelides, E. Angelino, B. Antunovic, E. Aprile, H. M. Araújo, J. E. Armstrong, M. Arthurs, M. Babicz, A. Baker, M. Balzer, J. Bang, E. Barberio , et al. (419 additional authors not shown)

Abstract: This report describes the experimental strategy and technologies for XLZD, the next-generation xenon observatory sensitive to dark matter and neutrino physics. In the baseline design, the detector will have an active liquid xenon target of 60 tonnes, which could be increased to 80 tonnes if the market conditions for xenon are favorable. It is based on the mature liquid xenon time projection chambe… ▽ More This report describes the experimental strategy and technologies for XLZD, the next-generation xenon observatory sensitive to dark matter and neutrino physics. In the baseline design, the detector will have an active liquid xenon target of 60 tonnes, which could be increased to 80 tonnes if the market conditions for xenon are favorable. It is based on the mature liquid xenon time projection chamber technology used in current-generation experiments, LZ and XENONnT. The report discusses the baseline design and opportunities for further optimization of the individual detector components. The experiment envisaged here has the capability to explore parameter space for Weakly Interacting Massive Particle (WIMP) dark matter down to the neutrino fog, with a 3$σ$ evidence potential for WIMP-nucleon cross sections as low as $3\times10^{-49}\rm\,cm^2$ (at 40 GeV/c$^2$ WIMP mass). The observatory will also have leading sensitivity to a wide range of alternative dark matter models. It is projected to have a 3$σ$ observation potential of neutrinoless double beta decay of $^{136}$Xe at a half-life of up to $5.7\times 10^{27}$ years. Additionally, it is sensitive to astrophysical neutrinos from the sun and galactic supernovae. △ Less

Submitted 14 April, 2025; v1 submitted 22 October, 2024; originally announced October 2024.

Comments: 33 pages, 14 figures

Quantum-Enhanced Detection of Viral cDNA via Luminescence Resonance Energy Transfer Using Upconversion and Gold Nanoparticles

Authors: Shahriar Esmaeili, Navid Rajil, Ayla Hazrathosseini, Benjamin W. Neuman, Masfer H. Alkahtani, Dipankar Sen, Qiang Hu, Hung-Jen Wu, Zhenhuan Yi, Robert W. Brick, Alexei V. Sokolov, Philip R. Hemmer, Marlan O. Scully

Abstract: The COVID-19 pandemic has profoundly impacted global economies and healthcare systems, revealing critical vulnerabilities in both. In response, our study introduces a groundbreaking method for the detection of SARS-CoV-2 cDNA, leveraging Luminescence resonance energy transfer (LRET) between upconversion nanoparticles (UCNPs) and gold nanoparticles (AuNPs) to achieve an unprecedented detection limi… ▽ More The COVID-19 pandemic has profoundly impacted global economies and healthcare systems, revealing critical vulnerabilities in both. In response, our study introduces a groundbreaking method for the detection of SARS-CoV-2 cDNA, leveraging Luminescence resonance energy transfer (LRET) between upconversion nanoparticles (UCNPs) and gold nanoparticles (AuNPs) to achieve an unprecedented detection limit of 242 femtomolar (fM). This innovative sensing platform utilizes UCNPs conjugated with one primer and AuNPs with another, targeting the 5' and 3' ends of the SARS-CoV-2 cDNA, respectively, enabling precise differentiation of mismatched DNA sequences and significantly enhancing detection specificity. Through rigorous experimental analysis, we established a quenching efficiency range from 10.4\% to 73.6\%, with an optimal midpoint of 42\%, thereby demonstrating the superior sensitivity of our method. By comparing the quenching efficiency of mismatched DNAs to the target DNA, we identified an optimal DNA:UCNP:AuNP ratio that ensures accurate detection. Our comparative analysis with existing SARS-CoV-2 detection methods revealed that our approach not only provides a lower detection limit but also offers higher specificity and potential for rapid, on-site testing. This study demonstrates the superior sensitivity and specificity of using UCNPs and AuNPs for SARS-CoV-2 cDNA detection, offering a significant advancement in rapid, accessible diagnostic technologies. Our method, characterized by its low detection limit and high precision, represents a critical step forward in managing current and future viral outbreaks, contributing to the enhancement of global healthcare responsiveness and infectious disease control. △ Less

Submitted 13 October, 2024; originally announced October 2024.

Comments: 14 pages, 5 figs

Dual-Mode Calorimetric Superconducting Nanowire Single Photon Detectors

Authors: Hsin-Yeh Wu, Marc Besançon, Jia-Wern Chen, Pisin Chen, Jean-François Glicenstein, Shu-Xiao Liu, Yu-Jung Lu, Xavier-François Navick, Stathes Paganis, Boris Tuchming, Dimitra Tsionou, Feng-Yang Tsai

Abstract: A dual-operation mode SNSPD is proposed. In the conventional Geiger mode, the sensor operates at temperatures well below the critical temperature, Tc, working as an event counter without sensitivity to the number of photons impinging the sensor. In the calorimetric mode, the detector is operated at temperatures just below TC and displays calorimetric sensitivity in the range of 15 to 250 absorbed-… ▽ More A dual-operation mode SNSPD is proposed. In the conventional Geiger mode, the sensor operates at temperatures well below the critical temperature, Tc, working as an event counter without sensitivity to the number of photons impinging the sensor. In the calorimetric mode, the detector is operated at temperatures just below TC and displays calorimetric sensitivity in the range of 15 to 250 absorbed-photon energy equivalent for a photon beam with a wavelength of 515 nm. In this energy sensitive mode, photon absorption causes Joule heating of the SNSPD that becomes partially resistive without the presence of latching. Depending on the application, by tuning the sample temperature and bias current using the same readout system, the SNSPD can readily switch between the two modes. In the calorimetric mode, SNSPD recovery times shorter than the ones in the Geiger mode are observed, reaching values as low as 560 ps. Dual-mode SNSPDs may provide significant advancements in spectroscopy and calorimetry, where precise timing, photon counting and energy resolution are required. △ Less

Submitted 20 March, 2025; v1 submitted 14 October, 2024; originally announced October 2024.

Comments: Manuscript prepared for APL