Showing 1–21 of 21 results for author: Wrobel, M

Operation of a Modular 3D-Pixelated Liquid Argon Time-Projection Chamber in a Neutrino Beam

Authors: DUNE Collaboration, S. Abbaslu, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, C. Adriano, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos, M. Andreotti , et al. (1299 additional authors not shown)

Abstract: The 2x2 Demonstrator, a prototype for the Deep Underground Neutrino Experiment (DUNE) liquid argon (LAr) Near Detector, was exposed to the Neutrinos from the Main Injector (NuMI) neutrino beam at Fermi National Accelerator Laboratory (Fermilab). This detector prototypes a new modular design for a liquid argon time-projection chamber (LArTPC), comprised of a two-by-two array of four modules, each f… ▽ More The 2x2 Demonstrator, a prototype for the Deep Underground Neutrino Experiment (DUNE) liquid argon (LAr) Near Detector, was exposed to the Neutrinos from the Main Injector (NuMI) neutrino beam at Fermi National Accelerator Laboratory (Fermilab). This detector prototypes a new modular design for a liquid argon time-projection chamber (LArTPC), comprised of a two-by-two array of four modules, each further segmented into two optically-isolated LArTPCs. The 2x2 Demonstrator features a number of pioneering technologies, including a low-profile resistive field shell to establish drift fields, native 3D ionization pixelated imaging, and a high-coverage dielectric light readout system. The 2.4 tonne active mass detector is flanked upstream and downstream by supplemental solid-scintillator tracking planes, repurposed from the MINERvA experiment, which track ionizing particles exiting the argon volume. The antineutrino beam data collected by the detector over a 4.5 day period in 2024 include over 30,000 neutrino interactions in the LAr active volume-the first neutrino interactions reported by a DUNE detector prototype. During its physics-quality run, the 2x2 Demonstrator operated at a nominal drift field of 500 V/cm and maintained good LAr purity, with a stable electron lifetime of approximately 1.25 ms. This paper describes the detector and supporting systems, summarizes the installation and commissioning, and presents the initial validation of collected NuMI beam and off-beam self-triggers. In addition, it highlights observed interactions in the detector volume, including candidate muon anti-neutrino events. △ Less

Submitted 6 September, 2025; originally announced September 2025.

Report number: FERMILAB-PUB-25-0537-LBNF

Spatial and Temporal Evaluations of the Liquid Argon Purity in ProtoDUNE-SP

Authors: DUNE Collaboration, S. Abbaslu, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, C. Adriano, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos, M. Andreotti , et al. (1301 additional authors not shown)

Abstract: Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by… ▽ More Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by the cathode plane assembly, which is biased to create an almost uniform electric field in both volumes. The DUNE Far Detector modules must have robust cryogenic systems capable of filtering argon and supplying the TPC with clean liquid. This paper will explore comparisons of the argon purity measured by the purity monitors with those measured using muons in the TPC from October 2018 to November 2018. A new method is introduced to measure the liquid argon purity in the TPC using muons crossing both drift volumes of ProtoDUNE-SP. For extended periods on the timescale of weeks, the drift electron lifetime was measured to be above 30 ms using both systems. A particular focus will be placed on the measured purity of argon as a function of position in the detector. △ Less

Submitted 27 August, 2025; v1 submitted 11 July, 2025; originally announced July 2025.

Report number: CERN-EP-2025-157, FERMILAB-PUB-25-0445-V

Journal ref: JINST (2025) 20 P09008

European Contributions to Fermilab Accelerator Upgrades and Facilities for the DUNE Experiment

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase o… ▽ More The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase of the project with a 1.2 MW neutrino beam. Construction of this first phase is well underway. For DUNE Phase II, this will be closely followed by an upgrade of the beam power to > 2 MW, for which the European groups again have a key role and which will require the continued support of the European community for machine aspects of neutrino physics. Beyond the neutrino beam aspects, LBNF is also responsible for providing unique infrastructure to install and operate the DUNE neutrino detectors at FNAL and at the Sanford Underground Research Facility (SURF). The cryostats for the first two Liquid Argon Time Projection Chamber detector modules at SURF, a contribution of CERN to LBNF, are central to the success of the ongoing execution of DUNE Phase I. Likewise, successful and timely procurement of cryostats for two additional detector modules at SURF will be critical to the success of DUNE Phase II and the overall physics program. The DUNE Collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This paper is being submitted to the 'Accelerator technologies' and 'Projects and Large Experiments' streams. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and DUNE software and computing, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

DUNE Software and Computing Research and Development

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing res… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing resources, and successful research and development of software (both infrastructure and algorithmic) in order to achieve these scientific goals. This submission discusses the computing resources projections, infrastructure support, and software development needed for DUNE during the coming decades as an input to the European Strategy for Particle Physics Update for 2026. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Computing' stream focuses on DUNE software and computing. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

The DUNE Phase II Detectors

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Detector instrumentation' stream focuses on technologies and R&D for the DUNE Phase II detectors. Additional inputs related to the DUNE science program, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 29 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

Monte Carlo method for constructing confidence intervals with unconstrained and constrained nuisance parameters in the NOvA experiment

Authors: M. A. Acero, B. Acharya, P. Adamson, L. Aliaga, N. Anfimov, A. Antoshkin, E. Arrieta-Diaz, L. Asquith, A. Aurisano, A. Back, C. Backhouse, M. Baird, N. Balashov, P. Baldi, B. A. Bambah, S. Bashar, A. Bat, K. Bays, R. Bernstein, V. Bhatnagar, D. Bhattarai, B. Bhuyan, J. Bian, A. C. Booth, R. Bowles , et al. (196 additional authors not shown)

Abstract: Measuring observables to constrain models using maximum-likelihood estimation is fundamental to many physics experiments. Wilks' theorem provides a simple way to construct confidence intervals on model parameters, but it only applies under certain conditions. These conditions, such as nested hypotheses and unbounded parameters, are often violated in neutrino oscillation measurements and other expe… ▽ More Measuring observables to constrain models using maximum-likelihood estimation is fundamental to many physics experiments. Wilks' theorem provides a simple way to construct confidence intervals on model parameters, but it only applies under certain conditions. These conditions, such as nested hypotheses and unbounded parameters, are often violated in neutrino oscillation measurements and other experimental scenarios. Monte Carlo methods can address these issues, albeit at increased computational cost. In the presence of nuisance parameters, however, the best way to implement a Monte Carlo method is ambiguous. This paper documents the method selected by the NOvA experiment, the profile construction. It presents the toy studies that informed the choice of method, details of its implementation, and tests performed to validate it. It also includes some practical considerations which may be of use to others choosing to use the profile construction. △ Less

Submitted 24 January, 2025; v1 submitted 28 July, 2022; originally announced July 2022.

Comments: 28 pages, 14 figures

Report number: FERMILAB-PUB-22-476-ND

Journal ref: 2025 JINST 20 T02001

Numerical simulation of hydraulic fracturing: a hybrid FEM based algorithm

Authors: Michal Wrobel, Panos Papanastasiou, Daniel Peck

Abstract: In this paper a problem of numerical simulation of hydraulic fractures is considered. An efficient algorithm of solution is proposed for the plain strain model of hydraulic fracturing. The algorithm utilizes a FEM based subroutine to compute deformation of the fractured material. The flow of generalized Newtonian fluid in the fracture is modelled in the framework of lubrication theory. In this way… ▽ More In this paper a problem of numerical simulation of hydraulic fractures is considered. An efficient algorithm of solution is proposed for the plain strain model of hydraulic fracturing. The algorithm utilizes a FEM based subroutine to compute deformation of the fractured material. The flow of generalized Newtonian fluid in the fracture is modelled in the framework of lubrication theory. In this way, the architecture of the computational scheme is relatively simple and enables one to deal with advanced cases of the fractured material properties and configurations as well as various rheological models of fluid. In particular, the problems of poroelasticity, plasticity and spatially varying properties of the fractured material can be analyzed. The accuracy and efficiency of the proposed algorithm are verified against analytical benchmark solutions. The algorithm capabilities are demonstrated using the example of the hydraulic fracture propagating in complex geological settings. △ Less

Submitted 25 April, 2022; v1 submitted 10 August, 2021; originally announced August 2021.

Report number: NAG-21-0413.R1

Journal ref: International Journal for Numerical and Analytical Methods in Geomechanics, 2022

Energy Release Rate, the crack closure integral and admissible singular fields in Fracture Mechanics

Authors: Andrea Piccolroaz, Daniel Peck, Michal Wrobel, Gennady Mishuris

Abstract: One of the assumptions of Linear Elastic Fracture Mechanics is that the crack faces are traction-free or, at most, loaded by bounded tractions. The standard Irwin's crack closure integral, widely used for the computation of the Energy Release Rate, also relies upon this assumption. However, there are practical situations where the load acting on the crack boundaries is singular. This is the case,… ▽ More One of the assumptions of Linear Elastic Fracture Mechanics is that the crack faces are traction-free or, at most, loaded by bounded tractions. The standard Irwin's crack closure integral, widely used for the computation of the Energy Release Rate, also relies upon this assumption. However, there are practical situations where the load acting on the crack boundaries is singular. This is the case, for instance, in hydraulic fracturing, where the fluid inside the crack exerts singular tangential tractions at its front. Another example of unbounded tractions is the case of a rigid line inclusion (anticrack) embedded into an elastic body. In such situations, the classical Irwin's crack closure integral fails to provide the correct value of the Energy Release Rate. In this paper, we address the effects occurring when square-root singular tractions act at the boundary of a line defect in an elastic solid and provide a generalisation of Irwin's crack closure integral. The latter yields the correct Energy Release Rate and allows broad applications, including, among others, hydraulic fracturing, soft materials containing stiff inclusions, rigid inclusions, shear bands and cracks characterized by the Gurtin-Murdoch surface stress elasticity. We present the results in the most general form, where six Stress Intensity Factors are present: three of them are classical SIFs corresponding to the modes I-II-III and computed under the assumption of homogeneous boundary conditions at the defect surfaces, while the other three SIFs are associated with singular admissible tractions (those that lead to a finite ERR value). It is demonstrated that this approach resolves an ambiguity in using the same SIF's terminology in the cases of open cracks and rigid inclusions, among other benefits. △ Less

Submitted 9 April, 2021; v1 submitted 31 March, 2021; originally announced March 2021.

Comments: 22 pages 2 pictures

MSC Class: 74R10; 74B05; 74-10; 76D08; 86-10;

Journal ref: Int. J. Eng. Sci., 164 (2021), Article 103487

On the application of simplified rheological models of fluid in the hydraulic fracture problems

Authors: Michal Wrobel

Abstract: In this paper we analyse a problem of a hydraulic fracture driven by a non-Newtonian shear-thinning fluid. For the PKN fracture geometry we consider three different rheological models of fluid: i) the Carreau fluid, ii) the truncated power-law fluid, iii) the power-law fluid. For each of these models a number of simulations are performed. The results are post-processed and compared with each other… ▽ More In this paper we analyse a problem of a hydraulic fracture driven by a non-Newtonian shear-thinning fluid. For the PKN fracture geometry we consider three different rheological models of fluid: i) the Carreau fluid, ii) the truncated power-law fluid, iii) the power-law fluid. For each of these models a number of simulations are performed. The results are post-processed and compared with each other in order to find decisive factors for similarities/dissimilarities. It is shown that under certain conditions even the basic power-law rheology can be a good substitute for the Carreau characteristics. Although for a particular fluid such a conclusion cannot be made a priori, post-processing based on average values of the fluid shear rates is a very good tool to verify credibility of the results obtained for simplified rheological models. The truncated power-law rheology is a good alternative for the Carreau model. It always produces results that are very similar to those obtained with the equivalent Carreau fluid and simultaneously provides a relative ease of numerical implementation. △ Less

Submitted 8 July, 2020; originally announced July 2020.

Journal ref: International Journal of Engineering Science, 2020,150: 103275

On the influence of fluid rheology on hydraulic fracture

Authors: Michal Wrobel, Gennady Mishuris, Panos Papanastasiou

Abstract: We analyse a problem of a hydraulic fracture driven by a non-Newtonian shear-thinning fluid. Fluid viscosity is described by the four-parameter truncated power-law model. By varying the parameters of the rheological model we investigate spatial and temporal evolution of fluid flow inside the crack and the resulting fracture geometry. A detailed quantitative and qualitative analysis of the underlyi… ▽ More We analyse a problem of a hydraulic fracture driven by a non-Newtonian shear-thinning fluid. Fluid viscosity is described by the four-parameter truncated power-law model. By varying the parameters of the rheological model we investigate spatial and temporal evolution of fluid flow inside the crack and the resulting fracture geometry. A detailed quantitative and qualitative analysis of the underlying physical phenomena is delivered. The results demonstrate that rheological properties of fluids significantly affect the process of hydraulic fracture not only by the values of viscosity, but also by the range of fluid shear rates over which variation of viscosity occurs. △ Less

Submitted 17 November, 2020; v1 submitted 8 July, 2020; originally announced July 2020.

Journal ref: International Journal of Engineering Science, 2021, 158: 103426

Redirection of a crack driven by viscous fluid taking into account plastic effects in the process zone

Authors: M. Wrobel, A. Piccolroaz, P. Papanastasiou, G. Mishuris

Abstract: In this paper the problem of redirection of a crack driven by viscous fluid under mixed mode loading is considered. The loading includes the classical Modes I - III and the hydraulically induced tangential traction on the fracture walls. The effect of the plastic deformation of the near tip zone is accounted for. Different criteria to determine the fracture deflection angle are examined and compar… ▽ More In this paper the problem of redirection of a crack driven by viscous fluid under mixed mode loading is considered. The loading includes the classical Modes I - III and the hydraulically induced tangential traction on the fracture walls. The effect of the plastic deformation of the near tip zone is accounted for. Different criteria to determine the fracture deflection angle are examined and compared. △ Less

Submitted 9 December, 2019; originally announced February 2020.

Comments: 31 pages, 22 figures

Journal ref: Geomechanics for Energy and the Environment, ISSN: 2352-3808, Page: 100147, 2019

An efficient algorithm of solution for the flow of generalized Newtonian fluid in channels of simple geometries

Authors: Michal Wrobel

Abstract: In this paper a problem of stationary flow of generalized Newtonian fluid in a thin channel is considered. An efficient algorithm of solution is proposed that includes a flexible procedure for a continuous approximation of the apparent viscosity by means of elementary functions combined with analytical integration of the governing equations. The algorithm can be easily adapted to circular or ellip… ▽ More In this paper a problem of stationary flow of generalized Newtonian fluid in a thin channel is considered. An efficient algorithm of solution is proposed that includes a flexible procedure for a continuous approximation of the apparent viscosity by means of elementary functions combined with analytical integration of the governing equations. The algorithm can be easily adapted to circular or elliptic conduits. The accuracy and efficiency of computations are analyzed using an example of the Carreau fluid. The proposed computational scheme proves to be highly efficient and versatile providing excellent accuracy of solution at a very low computational cost. △ Less

Submitted 10 December, 2019; v1 submitted 29 October, 2019; originally announced November 2019.

Journal ref: Rheologica Acta, 59(9), 651-663, 2020

Redirection of a crack driven by viscous fluid

Authors: Monika Perkowska, Andrea Piccolroaz, Michal Wrobel, Gennady Mishuris

Abstract: As shown by Wrobel et al. (2017), the hydraulically induced tangential traction on fracture walls changes local displacement and stress fields. This resulted in the formulation of a new hydraulic fracture (HF) propagation condition based on the critical value of the energy release rate that accounts for the hydraulically-induced shear stress. Therefore it is clear that the crack direction criteria… ▽ More As shown by Wrobel et al. (2017), the hydraulically induced tangential traction on fracture walls changes local displacement and stress fields. This resulted in the formulation of a new hydraulic fracture (HF) propagation condition based on the critical value of the energy release rate that accounts for the hydraulically-induced shear stress. Therefore it is clear that the crack direction criteria, which depend on the tip distributions of the stress and strain fields, need to be changed. We analyse the two commonly used criteria, one based on the maximum circumferential stress (MCS) and another - on the minimum strain energy density (MSED). We show that the impact of the hydraulically induced shear stress on the direction of the crack propagation is negligible in the case of large material resistance to fracture, while for small toughness the effect is significant. Moreover, values of the redirection angles, corresponding to the so-called viscosity dominated regime, depend dramatically on the ratios of the stress intensity factors. △ Less

Submitted 2 October, 2017; originally announced October 2017.

Comments: 18 pages, 9 figures

Particle velocity based hydrofracturing algorithm for a penny-shaped crack

Authors: Daniel Peck, Michel Wrobel, Monika Perkowska, Gennady Mishuris

Abstract: A universal particle velocity based algorithm for simulating hydraulic fracture with leak-off, previously demonstrated for the PKN and KGD models, is extended to obtain solutions for a penny-shaped crack. The numerical scheme is capable of dealing with both the viscosity and toughness dominated regimes, with the fracture being driven by a power-law fluid. The computational approach utilizes two de… ▽ More A universal particle velocity based algorithm for simulating hydraulic fracture with leak-off, previously demonstrated for the PKN and KGD models, is extended to obtain solutions for a penny-shaped crack. The numerical scheme is capable of dealing with both the viscosity and toughness dominated regimes, with the fracture being driven by a power-law fluid. The computational approach utilizes two dependent variables; the fracture aperture and the reduced particle velocity. The latter allows for the application of a local condition of the Stefan type (the speed equation) to trace the fracture front. The obtained numerical solutions are carefully tested using various methods, and are shown to achieve a high level of accuracy. Simple, accurate, semi-analytical approximations of the solution are provided for the zero leak-off case. A comparison with other results available in the literature is undertaken. △ Less

Submitted 14 November, 2018; v1 submitted 10 December, 2016; originally announced December 2016.

Comments: 47 pages, 18 Figures, 12 Tables

MSC Class: 86-08; 74F10; 74R10; 76D08

Journal ref: Meccanica (Springer), 2018, open access

Energy Release Rate in hydraulic fracture: can we neglect an impact of the hydraulically induced shear stress?

Authors: Michal Wrobel, Gennady Mishuris, Andrea Piccolroaz

Abstract: A novel hydraulic fracture (HF) formulation is introduced which accounts for the hydraulically induced shear stress at the crack faces. It utilizes a general form of the elasticity operator alongside a revised fracture propagation condition based on the critical value of the energy release rate. It is shown that the revised formulation describes the underlying physics of HF in a more accurate way… ▽ More A novel hydraulic fracture (HF) formulation is introduced which accounts for the hydraulically induced shear stress at the crack faces. It utilizes a general form of the elasticity operator alongside a revised fracture propagation condition based on the critical value of the energy release rate. It is shown that the revised formulation describes the underlying physics of HF in a more accurate way and is in agreement with the asymptotic behaviour of the linear elastic fracture mechanics. A number of numerical simulations by means of the universal HF algorithm previously developed in Wrobel & Mishuris (2015) are performed in order to: i) compare the modified HF formulation with its classic counterpart and ii) investigate the peculiarities of the former. Computational advantages of the revised HF model are demonstrated. Asymptotic estimations of the main solution elements are provided for the cases of small and large toughness. The modified formulation opens new ways to analyse the physical phenomenon of HF and also improves the reliability and efficiency of its numerical simulations. △ Less

Submitted 10 December, 2016; v1 submitted 25 October, 2016; originally announced October 2016.

Comments: 33 pages, 18 Figures

MSC Class: 86-08; 74F10; 74R10; 76D08

Universal hydrofracturing algorithm for shear-thinning fluids: particle velocity based simulation

Authors: Monika Perkowska, Michal Wrobel, Gennady Mishuris

Abstract: A universal particle velocity based algorithm for simulating hydraulic fractures, previously proposed for Newtonian fluids, is extended to the class of shear-thinning fluids. The scheme is not limited to any particular elasticity operator or crack propagation regime. The computations are based on two dependent variables: the crack opening and the reduced particle velocity. The application of the l… ▽ More A universal particle velocity based algorithm for simulating hydraulic fractures, previously proposed for Newtonian fluids, is extended to the class of shear-thinning fluids. The scheme is not limited to any particular elasticity operator or crack propagation regime. The computations are based on two dependent variables: the crack opening and the reduced particle velocity. The application of the latter facilitates utilization of the local condition of Stefan type (speed equation) to trace the fracture front. The condition is given in a general explicit form which relates the crack propagation speed (and the crack length) to the solution tip asymptotics. The utilization of a modular structure, and the adaptive character of its basic blocks, result in a flexible numerical scheme. The computational accuracy of the proposed algorithm is validated against a number of analytical benchmark solutions. △ Less

Submitted 7 October, 2015; v1 submitted 27 June, 2015; originally announced June 2015.

Comments: 36 figures

MSC Class: 86A05; 74R99

Particle velocity based universal algorithm for numerical simulation of hydraulic fractures

Authors: Michal Wrobel, Gennady Mishuris

Abstract: In the paper, we propose a new effective mathematical formulation and resulting universal numerical algorithm capable of tackling various HF models in the framework of a unified approach. The presented numerical scheme is not limited to any particular elasticity model or crack propagation regime. Its basic assumptions are: i) proper choice of independent and dependent variables (with the direct ut… ▽ More In the paper, we propose a new effective mathematical formulation and resulting universal numerical algorithm capable of tackling various HF models in the framework of a unified approach. The presented numerical scheme is not limited to any particular elasticity model or crack propagation regime. Its basic assumptions are: i) proper choice of independent and dependent variables (with the direct utilization of a new one - the reduced particle velocity), ii) tracing the fracture front by use of the speed equation which can be integrated in a closed form and sets an explicit relation between the crack propagation speed and the coefficients in the asymptotic expansion of the crack opening, iii) proper regularization techniques, iv) improved temporal approximation, v) modular algorithm architecture. The application of the new dependent variable, the reduced particle velocity, instead of the usual fluid flow rate, facilitates the computation of the crack propagation speed from the local relation based on the speed equation. As a result, the position of the crack front is accurately determined from an explicit formula derived from the speed equation. The underlying ideas employed in the algorithm are combined together producing a robust and efficient numerical scheme. Its performance is demonstrated using classical examples of 1D models for hydraulic fracturing: PKN and KGD under various fracture propagation regimes. Solution accuracy is verified against dedicated analytical benchmarks and other solutions available in the literature. Most of the ideas developed here, can be directly extended to more general 2D and 3D cases. △ Less

Submitted 22 April, 2015; v1 submitted 15 December, 2014; originally announced December 2014.

Comments: 48 pages, 31 pictures, 2 Appendices

MSC Class: 74F10; 76M25; 76M45

Moving stone in the Hele-Shaw flow

Authors: Gennady Mishuris, Sergei Rogosin, Michal Wrobel

Abstract: Asymptotic analysis of the Hele-Shaw flow with a small moving obstacle is performed. The method of solution utilises the uniform asymptotic formulas for Green's and Neumann functions recently obtained by V. Maz'ya and A. Movchan. Theoretical results of the paper are illustrated by the numerical simulations. Asymptotic analysis of the Hele-Shaw flow with a small moving obstacle is performed. The method of solution utilises the uniform asymptotic formulas for Green's and Neumann functions recently obtained by V. Maz'ya and A. Movchan. Theoretical results of the paper are illustrated by the numerical simulations. △ Less

Submitted 19 September, 2014; v1 submitted 14 April, 2014; originally announced April 2014.

Comments: 29 pages, 14 figures

MSC Class: 76D27; 35J25; 35R35

Journal ref: Mathematika 61 (2015) 457-474

Efficient pseudo-spectral solvers for the PKN model of hydrofracturing

Authors: Michal Wrobel, Gennady Mishuris

Abstract: In the paper, a novel algorithm employing pseudo-spectral approach is developed for the PKN model of hydrofracturing. The respective solvers based on this approach compute both the solution and its temporal derivative. In comparison with conventional solvers, they demonstrate excellent cost effectiveness in terms of balance between the accuracy of computations and densities of the temporal and spa… ▽ More In the paper, a novel algorithm employing pseudo-spectral approach is developed for the PKN model of hydrofracturing. The respective solvers based on this approach compute both the solution and its temporal derivative. In comparison with conventional solvers, they demonstrate excellent cost effectiveness in terms of balance between the accuracy of computations and densities of the temporal and spatial meshes. Various leak-off regimes are considered. △ Less

Submitted 23 March, 2013; v1 submitted 5 February, 2013; originally announced February 2013.

Comments: 26 pages, 12 Figures, 1 Table

MSC Class: 65M20; 65M70;

Remarks on application of different variables for the PKN model of hydrofracturing. Various fluid-flow regimes

Authors: P. Kusmierczyk, G. Mishuris, M. Wrobel

Abstract: The problem of hydraulic fracture for the PKN model is considered within the framework presented recently by Linkov (2011). The modified formulation is further enhanced by employing an improved regularized boundary condition near the crack tip. This increases solution accuracy especially for singular leak-off regimes. A new dependent variable having clear physical sense is introduced. A comprehens… ▽ More The problem of hydraulic fracture for the PKN model is considered within the framework presented recently by Linkov (2011). The modified formulation is further enhanced by employing an improved regularized boundary condition near the crack tip. This increases solution accuracy especially for singular leak-off regimes. A new dependent variable having clear physical sense is introduced. A comprehensive analysis of numerical algorithms based on various dependent variables is provided. Comparison with know numerical results has been given. △ Less

Submitted 20 July, 2013; v1 submitted 27 November, 2012; originally announced November 2012.

Comments: 35 pages, 14 Figures, 9 tables, 3 Appendices

MSC Class: 74F10; 74H10; 74H15

On modeling hydraulic fracture in proper variables: stiffness, accuracy, sensitivity

Authors: Gennady Mishuris, Michal Wrobel, Alexander Linkov

Abstract: The problem of hydraulic fracture propagation is considered by using its recently suggested modified formulation in terms of the particle velocity, the opening in the proper degree, appropriate spatial coordinates and $\varepsilon$-regularization. We show that the formulation may serve for significant increasing the efficiency of numerical tracing the fracture propagation. Its advantages are illus… ▽ More The problem of hydraulic fracture propagation is considered by using its recently suggested modified formulation in terms of the particle velocity, the opening in the proper degree, appropriate spatial coordinates and $\varepsilon$-regularization. We show that the formulation may serve for significant increasing the efficiency of numerical tracing the fracture propagation. Its advantages are illustrated by re-visiting the Nordgren problem. It is shown that the modified formulation facilitates (i) possibility to have various stiffness of differential equations resulting after spatial discretization, (ii) obtaining highly accurate and stable numerical results with moderate computational effort, and (iii) sensitivity analysis. The exposition is extensively illustrated by numerical examples. △ Less

Submitted 26 March, 2012; originally announced March 2012.

Comments: 18 pages, 4 figures

MSC Class: 86-08; 74A45; 65P40; 37M05