-
Planar alignment of Liquid Crystals on h-BN for Near-Eye Displays
Authors:
Muhammad Arslan Shehzad,
Kanghee Won,
Yongho Seo,
Xinqi Chen
Abstract:
Liquid crystals alignment on 2D materials is known due to their intrinsic van der Waals interaction. Here, we demonstrate that direction of electric field can tune the alignment of liquid crystal adsorbed on 2D surface. Due to degeneracy of alignment liquid crystal on hexagonal surface, it prefers to align in three multiple states. We utilized this concept and control the alignment of grains of ch…
▽ More
Liquid crystals alignment on 2D materials is known due to their intrinsic van der Waals interaction. Here, we demonstrate that direction of electric field can tune the alignment of liquid crystal adsorbed on 2D surface. Due to degeneracy of alignment liquid crystal on hexagonal surface, it prefers to align in three multiple states. We utilized this concept and control the alignment of grains of chemical vapor deposition grown boron nitride (h-BN) to control the incident light. It was demonstrated that electric field can reorient the direction of liquid crystal alignment on Zigzag and armchair edges of h-BN. The ab initio calculations confirmed the favorable adsorption configurations of liquid crystal molecule on hexagonal boron nitride surface. This concept provides a pathway towards dynamic high-quality pixels with low power consumption and could define a new avenue in near-eye displays.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
Electrically actuated varifocal lens based on liquid-crystal-embedded dielectric metasurfaces
Authors:
Melissa Bosch,
Maxim R. Shcherbakov,
Kanghee Won,
Hong-Seok Lee,
Young Kim,
Gennady Shvets
Abstract:
Compact varifocal lenses are essential to various imaging and vision technologies. However, existing varifocal elements typically rely on mechanically-actuated systems with limited tuning speeds and scalability. Here, an ultrathin electrically controlled varifocal lens based on a liquid crystal (LC) encapsulated semiconductor metasurface is demonstrated. Enabled by the field-dependent LC anisotrop…
▽ More
Compact varifocal lenses are essential to various imaging and vision technologies. However, existing varifocal elements typically rely on mechanically-actuated systems with limited tuning speeds and scalability. Here, an ultrathin electrically controlled varifocal lens based on a liquid crystal (LC) encapsulated semiconductor metasurface is demonstrated. Enabled by the field-dependent LC anisotropy, applying a voltage bias across the LC cell modifies the local phase response of the silicon meta-atoms, in turn modifying the focal length of the metalens. In a numerical implementation, a voltage-actuated metalens with continuous zoom and up to 20% total focal shift is demonstrated. The concept of LC-based metalens is experimentally verified through the design and fabrication of a bifocal metalens that facilitates high-contrast switching between two discrete focal lengths upon application of a 3.2 V$_{\rm pp}$ voltage bias. Owing to their ultrathin thickness and adaptable design, LC-driven semiconductor metasurfaces open new opportunities for compact varifocal lensing in a diversity of modern imaging applications.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Study on acoustic radiation impedance at aperture of a waveguide with circular cross section taking account of interaction between different guided modes
Authors:
Kyong-Su Won,
Myong-Jin Kim,
Song-Jin Im
Abstract:
In this paper we simulated self- and mutual- acoustic impedances of guided modes at the aperture and estimated accuracy of the piston radiation approximation. We used the Rayleigh integral to simulate the interactions between different guided modes at the aperture, with low time-consuming. This kind of guided-wave technique can be utilized to solve problems in diverse fields of wave science such a…
▽ More
In this paper we simulated self- and mutual- acoustic impedances of guided modes at the aperture and estimated accuracy of the piston radiation approximation. We used the Rayleigh integral to simulate the interactions between different guided modes at the aperture, with low time-consuming. This kind of guided-wave technique can be utilized to solve problems in diverse fields of wave science such as acoustics, electromagnetism and optics. For acoustic waves emitted through a horn or a waveguide with an aperture much smaller than the wavelength, there are only plane wave modes in the waveguide and the aperture of horn can therefore be considered as a piston radiator. However if an acoustic wave with high frequency such as ultrasonic wave is radiated, there can exist several guided modes in the duct. For arbitrary shape and size of waveguide, interactions between different modes must be taken into account to evaluate sound field in the duct and total acoustic power from its aperture. In this paper we simulated self- and mutual- acoustic impedances of guided modes at the aperture and estimated accuracy of the piston radiation approximation. We used the Rayleigh integral to simulate the interactions between different guided modes at the aperture, with low time-consuming. This kind of guided-wave technique can be utilized to solve problems in diverse fields of wave science such as acoustics, electromagnetism and optics.
△ Less
Submitted 17 November, 2014;
originally announced November 2014.
-
Wavelets, Curvelets and Multiresolution Analysis Techniques in Fast Z Pinch Research
Authors:
Bedros Afeyan,
Kirk Won,
Jean Luc Starck,
Michael Cuneo
Abstract:
Z pinches produce an X ray rich plasma environment where backlighting imaging of imploding targets can be quite challenging to analyze. What is required is a detailed understanding of the implosion dynamics by studying snapshot images of its in flight deformations away from a spherical shell. We have used wavelets, curvelets and multiresolution analysis techniques to address some of these difficul…
▽ More
Z pinches produce an X ray rich plasma environment where backlighting imaging of imploding targets can be quite challenging to analyze. What is required is a detailed understanding of the implosion dynamics by studying snapshot images of its in flight deformations away from a spherical shell. We have used wavelets, curvelets and multiresolution analysis techniques to address some of these difficulties and to establish the Shell Thickness Averaged Radius (STAR) of maximum density, r*(N, θ), where N is the percentage of the shell thickness over which we average. The non-uniformities of r*(N, θ) are quantified by a Legendre polynomial decomposition in angle, θ, and the identification of its largest coefficients. Undecimated wavelet decompositions outperform decimated ones in denoising and both are surpassed by the curvelet transform. In each case, hard thresholding based on noise modeling is used.
△ Less
Submitted 10 November, 2012;
originally announced November 2012.
-
Wavelets, Curvelets and Multiresolution Analysis Techniques Applied to Implosion Symmetry Characterization of ICF Targets
Authors:
Bedros Afeyan,
Kirk Won,
Jean Luc Starck,
Michael Cuneo
Abstract:
We introduce wavelets, curvelets and multiresolution analysis techniques to assess the symmetry of X ray driven imploding shells in ICF targets. After denoising X ray backlighting produced images, we determine the Shell Thickness Averaged Radius (STAR) of maximum density, r*(N, θ), where N is the percentage of the shell thickness over which to average. The non-uniformities of r*(N, θ) are quantifi…
▽ More
We introduce wavelets, curvelets and multiresolution analysis techniques to assess the symmetry of X ray driven imploding shells in ICF targets. After denoising X ray backlighting produced images, we determine the Shell Thickness Averaged Radius (STAR) of maximum density, r*(N, θ), where N is the percentage of the shell thickness over which to average. The non-uniformities of r*(N, θ) are quantified by a Legendre polynomial decomposition in angle, θ. Undecimated wavelet decompositions outperform decimated ones in denoising and both are surpassed by the curvelet transform. In each case, hard thresholding based on noise modeling is used. We have also applied combined wavelet and curvelet filter techniques with variational minimization as a way to select the significant coefficients. Gains are minimal over curvelets alone in the images we have analyzed.
△ Less
Submitted 10 November, 2012;
originally announced November 2012.
-
Optical Mixing Controlled Stimulated Scattering instabilities: Suppression of SRS by the Controlled Introduction of Ion Acoustic and Electron Plasma Wave Turbulence
Authors:
Bedros Afeyan,
M. Mardirian,
K. Won,
D. S. Montgomery,
J. Hammer,
R. K. Kirkwood,
A. J. Schmitt
Abstract:
In a series of experiments on the Omega laser facility at LLE, we have demonstrated the suppression of SRS in prescribed spectral windows due to the presence of externally controlled levels of ion acoustic waves (IAW, by crossing two blue beams at the Mach -1 surface) and electron plasma waves (EPW, by crossing a blue and a green beam around a tenth critical density plasma) generated via optical m…
▽ More
In a series of experiments on the Omega laser facility at LLE, we have demonstrated the suppression of SRS in prescribed spectral windows due to the presence of externally controlled levels of ion acoustic waves (IAW, by crossing two blue beams at the Mach -1 surface) and electron plasma waves (EPW, by crossing a blue and a green beam around a tenth critical density plasma) generated via optical mixing. We have further observed SRS backscattering of a green beam when crossed with a blue pump beam, in whose absence, that (green beam) backscattering signature was five times smaller. This is direct evidence for green beam amplification when crossed with the blue. Additional proof comes from transmitted green beam measurements. A combination of these techniques may allow the suppression of unacceptable levels of SRS near the light entrance hole of large-scale hohlraums on the NIF or LMJ.
△ Less
Submitted 10 November, 2012;
originally announced November 2012.
-
Kinetic Electrostatic Electron Nonlinear (KEEN) Waves and their Interactions Driven by the Ponderomotive Force of Crossing Laser Beams
Authors:
Bedros Afeyan,
K. Won,
V. Savchenko,
T. Johnston,
A. Ghizzo,
P. Bertrand
Abstract:
We have found, using 1D periodic Vlasov-Poisson simulations, new nonlinear, nonstationary, stable, long lived, coherent structures in phase space, called kinetic electrostatic electron nonlinear (KEEN) waves. Ponderomotively driven for a short period of time, at a particular frequency and wavenumber, well inside the band gap that was thought to exist between electron plasma and electron acoustic w…
▽ More
We have found, using 1D periodic Vlasov-Poisson simulations, new nonlinear, nonstationary, stable, long lived, coherent structures in phase space, called kinetic electrostatic electron nonlinear (KEEN) waves. Ponderomotively driven for a short period of time, at a particular frequency and wavenumber, well inside the band gap that was thought to exist between electron plasma and electron acoustic wave frequencies, KEEN waves are seen to self-consistently form, and persist for thousands of plasma periods. KEEN waves are comprised of 4 or more significant phase-locked harmonic modes which persist only when driven sufficiently strongly. They also merge when two or more at different frequencies are driven sequentially. However, the final stable KEEN state that emerges is highly sensitive to their relative order of excitation. KEEN waves also interact quite strongly with electron plasma waves (EPW) especially when their harmonics are close to being resonant with the EPW frequency at the same k. The common assumption that whenever sufficiently large amplitude coherent laser energy is present in an unmagnetized plasma, EPWs and IAWs are the only waves with which the electromagnetic energy can interact coherently may require reconsideration.
△ Less
Submitted 30 October, 2012;
originally announced October 2012.