Showing 1–42 of 42 results for author: Wiersma, D

Experimental determination of effective light transport properties in fully anisotropic media

Authors: Ernesto Pini, Peter Naglič, Miran Bürmen, Alexander Gatto, Henrik Schäfer, Diederik S. Wiersma, Lorenzo Pattelli

Abstract: Structurally anisotropic materials are ubiquitous in several application fields, yet their accurate optical characterization remains challenging due to the lack of general models linking their scattering coefficients to the macroscopic transport observables, and the need to combine multiple measurements to retrieve their direction-dependent values. Here, we present an improved method for the exper… ▽ More Structurally anisotropic materials are ubiquitous in several application fields, yet their accurate optical characterization remains challenging due to the lack of general models linking their scattering coefficients to the macroscopic transport observables, and the need to combine multiple measurements to retrieve their direction-dependent values. Here, we present an improved method for the experimental determination of light transport tensor coefficients from the diffusive rates measured along all three directions, based on transient transmittance measurements and a generalized Monte Carlo model. We apply our method to the characterization of light transport properties in two common anisotropic materials - polytetrafluoroethylene (PTFE) tape and paper - highlighting the magnitude of systematic deviations that are typically incurred when neglecting anisotropy. △ Less

Submitted 29 March, 2024; v1 submitted 28 March, 2024; originally announced March 2024.

Journal ref: Advanced Photonics Nexus 3 (5), 056017 (2024)

Full-body deep learning-based automated contouring of contrast-enhanced murine organs for small animal irradiator CBCT

Authors: Ethan Cramer, Sophie Dobiasch, Xinmin Liu, Stephanie E. Combs, Rodney D. Wiersma

Abstract: Purpose. To alleviate the manual contouring burden, deep learning (DL) based automated contouring has been explored. However, due to the poor contrast resolution of preclinical irradiator CBCT, these methods have been limited to high contrast - minimally anatomically complex - structures such as the heart and lungs. Thus, low contrast abdominal CBCT DL-based segmentation has yet to be addressed. I… ▽ More Purpose. To alleviate the manual contouring burden, deep learning (DL) based automated contouring has been explored. However, due to the poor contrast resolution of preclinical irradiator CBCT, these methods have been limited to high contrast - minimally anatomically complex - structures such as the heart and lungs. Thus, low contrast abdominal CBCT DL-based segmentation has yet to be addressed. In this work we explore a DL-based model in conjunction with iodine-based contrast agent approach to allow precise automatic contouring of mouse abdominal, thorax, and skeletal structures in under a second. Methods. A DL U-net-like architecture was trained to contour mice organs in small animal radiation research platform CBCT scans. 41 mice were contoured by a human expert, using semi-automatic segmentation methods, after injection of iodine contrast agent, establishing a ground truth for the DL model. The model was trained on a dataset of 26 mice, while 2 mice were used for validation, tuning the model during training, and 15 mice used for performance evaluation testing. The model consists of a pre-processor, and a post-processor for volumetric reconstruction of the DL-predicted probability maps. Model performance was evaluated using both qualitative and distance metrics, including the dice similarity score, precision score, Hausdorff Distance (HD), and mean surface distance (MSD). Results. Performance of the DL-based iodine contrast-enhanced model provided high quality predicted contours in under a second, with the median for all organs being reported: dice $>$ 91\%, precision $>$ 95\%, HD50 $<$ 1.0 mm, and MSD $<$ 1.41 mm. Conclusion. The proposed combination of a DL-based and iodine contrast-enhanced model proved as a viable method to vastly improve efficiency of small animal CBCT image-guided RT preclinical trials. △ Less

Submitted 4 February, 2024; originally announced February 2024.

Diffusion of light in structurally anisotropic media with uniaxial symmetry

Authors: Ernesto Pini, Fabrizio Martelli, Alexander Gatto, Henrik Schäfer, Diederik S. Wiersma, Lorenzo Pattelli

Abstract: Anisotropic light transport is extremely common among scattering materials, yet a comprehensive picture of how macroscopic diffusion is determined by microscopic tensor scattering coefficients is not fully established yet. In this work, we present a theoretical and experimental study of diffusion in structurally anisotropic media with uniaxially symmetric scattering coefficients. Exact analytical… ▽ More Anisotropic light transport is extremely common among scattering materials, yet a comprehensive picture of how macroscopic diffusion is determined by microscopic tensor scattering coefficients is not fully established yet. In this work, we present a theoretical and experimental study of diffusion in structurally anisotropic media with uniaxially symmetric scattering coefficients. Exact analytical relations are derived in the case of index-matched turbid media, unveiling the general relation between microscopic scattering coefficients and the resulting macroscopic diffusion tensor along different directions. Excellent agreement is found against anisotropic Monte Carlo simulations up to high degrees of anisotropy, in contrast with previously proposed approaches. The obtained solutions are used to analyze experimental measurements of anisotropic light transport in polystyrene foam samples under different degrees of uniaxial compression, providing a practical example of their applicability. △ Less

Submitted 25 January, 2024; originally announced January 2024.

Journal ref: Physical Review Research 6, 023051 (2024)

Flexible Physical Unclonable Functions based on non-deterministically distributed Dye-Doped Fibers and Droplets

Authors: Mauro Daniel Luigi Bruno, Giuseppe Emanuele Lio, Antonio Ferraro, Sara Nocentini, Giuseppe Papuzzo, Agostino Forestiero, Giovanni Desiderio, Maria Penelope De Santo, Diederik Sybolt Wiersma, Roberto Caputo, Giovanni Golemme, Francesco Riboli, Riccardo Cristoforo Barberi

Abstract: The development of new anti-counterfeiting solutions is a constant challenge and involves several research fields. Much interest is devoted to systems that are impossible to clone, based on the Physical Unclonable Function (PUF) paradigm. In this work, new strategies based on electrospinning and electrospraying of dye-doped polymeric materials are presented for the manufacturing of flexible free-s… ▽ More The development of new anti-counterfeiting solutions is a constant challenge and involves several research fields. Much interest is devoted to systems that are impossible to clone, based on the Physical Unclonable Function (PUF) paradigm. In this work, new strategies based on electrospinning and electrospraying of dye-doped polymeric materials are presented for the manufacturing of flexible free-standing films that embed different PUF keys. Films can be used to fabricate anticounterfeiting labels having three encryption levels: i) a map of fluorescent polymer droplets, with non deterministic positions on a dense yarn of polymer nanofibers; ii) a characteristic fluorescence spectrum for each label; iii) a challenge-response pairs (CRPs) identification protocol based on the strong nature of the physical unclonable function. The intrinsic uniqueness introduced by the deposition techniques encodes enough complexity into the optical anti-counterfeiting tag to generate thousands of cryptographic keys. The simple and cheap fabrication process as well as the multilevel authentication makes such colored polymeric unclonable tags a practical solution in the secure protection of merchandise in our daily life. △ Less

Submitted 19 July, 2023; originally announced August 2023.

Journal ref: ACS Appl. Mater. Interfaces 2024,16,28,37063-37072

Optical Limiter Based on PT-Symmetry Breaking of Reflectionless Modes

Authors: F. Riboli, R. Kononchuk, F. Tommasi, A. Boschetti, S. Suwunnarat, I. Anisimov, I. Vitebskiy, D. S. Wiersma, S. Cavalieri, T. Kottos, A. A. Chabanov

Abstract: The application of parity-time (PT) symmetry in optics, especially PT-symmetry breaking, has attracted considerable attention as a novel approach to controlling light propagation. Here, we report optical limiting by two coupled optical cavities with a PT-symmetric spectrum of reflectionless modes. The optical limiting is related to broken PT symmetry due to light-induced changes in one of the cavi… ▽ More The application of parity-time (PT) symmetry in optics, especially PT-symmetry breaking, has attracted considerable attention as a novel approach to controlling light propagation. Here, we report optical limiting by two coupled optical cavities with a PT-symmetric spectrum of reflectionless modes. The optical limiting is related to broken PT symmetry due to light-induced changes in one of the cavities. Our experimental implementation is a three-mirror resonator of alternating layers of ZnS and cryolite with a PT-symmetric spectral degeneracy of two reflectionless modes. The optical limiting is demonstrated by measurements of single 532-nm 6-ns laser pulses. At fluences below 10 mJ/cm2, the multilayer exhibits a flat-top passband at 532 nm. At higher fluences, laser heating combined with the thermo-optic effect in ZnS leads to cavity detuning and PT-symmetry breaking of the reflectionless modes. As a result, the entire multilayer structure quickly becomes highly reflective, protecting itself from laser-induced damage. The cavity detuning mechanism can differ at much higher limiting thresholds and include nonlinearity. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Comments: 17 pages, 5 figures

Breakdown of self-similarity in light transport

Authors: Ernesto Pini, Giacomo Mazzamuto, Francesco Riboli, Diederik S. Wiersma, Lorenzo Pattelli

Abstract: Transport processes underpin a multitude of phenomena, ranging from the propagation of atoms on lattices, to the mobility patterns of microorganisms and earthquakes, to name a few. The dynamics of these processes is very rich and key to understanding the complex nature of the underlying physics, but the way in which we classify them is often too simplistic to fully reflect this complexity. Here, w… ▽ More Transport processes underpin a multitude of phenomena, ranging from the propagation of atoms on lattices, to the mobility patterns of microorganisms and earthquakes, to name a few. The dynamics of these processes is very rich and key to understanding the complex nature of the underlying physics, but the way in which we classify them is often too simplistic to fully reflect this complexity. Here, we report on the experimental observation of a breakdown of self-similar propagation for light inside a scattering medium - a transport regime exhibiting different scaling rates for each spatial moment of the associated probability distribution. Notably, we show that this phenomenon arises for light waves even in the simple case of isotropic and homogeneous disorder, and can be controlled by tuning the turbidity of the system. These results support the idea that the traditional dichotomy between normal and anomalous diffusion is reductive and that a richer framework should be constructed based on the concept of self-similarity as this class of transport regimes may be far more common that it is currently believed. In addition, this insight can help understand scenarios where transport is dominated by rare propagation events, as in non-linear and active media, or more generally in other fields of research. △ Less

Submitted 5 April, 2023; originally announced April 2023.

Journal ref: Physical Review Research, 6(3), L032026 (2024)

Physical Realization of a Hyper Unclonable Function

Authors: Sara Nocentini, Ulrich Rührmair, Mauro Barni, Diederik S. Wiersma, Francesco Riboli

Abstract: Disordered photonic structures are promising materials for the realization of physical unclonable functions (PUF), physical objects that can overcome the limitations of conventional digital security methods and that enable cryptographic protocols immune against attacks by future quantum computers. One PUF limitation, so far, has been that their physical configuration is either fixed or can only be… ▽ More Disordered photonic structures are promising materials for the realization of physical unclonable functions (PUF), physical objects that can overcome the limitations of conventional digital security methods and that enable cryptographic protocols immune against attacks by future quantum computers. One PUF limitation, so far, has been that their physical configuration is either fixed or can only be permanently modified, and hence allowing only one token per device. We show that it is possible to overcome this limitation by creating a reconfigurable structure made by light-transformable polymers, in which the physical structure of the unclonable function itself can be reversibly reconfigured. We term this novel concept Hyper PUF or HPUF in that it allows a large number of physical unclonable functions to co-exist simultaneously within one and the same device. The physical transformation of the structure is done all-optically in a reversible and spatially controlled fashion. Our novel technology provides a massive enhancement in security generating more complex keys containing a larger amount of information. At the same time, it allows for new applications, for example serving multiple clients on a single encryption device and the practical implementation of quantum secure authentication of data. △ Less

Submitted 3 March, 2023; v1 submitted 23 December, 2022; originally announced January 2023.

Quantifying the Sensitivity and Unclonability of Optical Physical Unclonable Functions

Authors: Giuseppe Emanuele Lio, Sara Nocentini, Lorenzo Pattelli, Eleonora Cara, Diederik Sybolt Wiersma, Ulrich Rührmair, Francesco Riboli

Abstract: Due to their unmatched entropy, complexity, and security level, optical Physical Unclonable Functions (PUFs) currently receive a lot of interest in the literature. Despite the large body of existing works, however, one of their core features has never been quantified in detail, namely their physical unclonability. This paper tackles this fundamental and yet largely unaddressed issue. In simulation… ▽ More Due to their unmatched entropy, complexity, and security level, optical Physical Unclonable Functions (PUFs) currently receive a lot of interest in the literature. Despite the large body of existing works, however, one of their core features has never been quantified in detail, namely their physical unclonability. This paper tackles this fundamental and yet largely unaddressed issue. In simulations and/or experiments, the sensitivity of diffraction-based optical responses is investigated with respect to various small alterations such as variation in the position, size, and number of the scatterers, as well as perturbations in the spatial alignment between the physical unclonable function (PUF) and the measurement apparatus. Our analysis focuses on 2D optical PUFs because of their relevance in integrated applications and the need to reply to security concerns that can be raised when the physical structure of the geometry is accessible. Among the results of this study, the sensitivity analysis shows that a positional perturbation of scatterers on the order of \SI{30}{\nano\meter}, i.e., far below the wavelength of the probing laser light of \SI{632}{\nano\meter} wavelength, is sufficient to invalidate the PUF response and thus detect a forgery attempt. These results support and quantify the high adversarial efforts required to clone optical PUFs, even for 2D layouts. △ Less

Submitted 29 July, 2022; originally announced August 2022.

Comments: 8 pages, 7 figures and Supporting Information

Gas-phase spectroscopy of photostable PAH ions from the mid- to far-infrared

Authors: Sandra D. Wiersma, Alessandra Candian, Joost M. Bakker, Annemieke Petrignani

Abstract: We present gas-phase InfraRed Multiple Photon Dissociation (IRMPD) spectroscopy of cationic phenanthrene, pyrene, and perylene over the 100$-$1700 cm$^{-1}$ (6-95 $μ$m) spectral range. This range covers both local vibrational modes involving C$-$C and C$-$H bonds in the mid-IR, and large-amplitude skeletal modes in the far-IR. The experiments were done using the 7T Fourier-Transform Ion Cyclotron… ▽ More We present gas-phase InfraRed Multiple Photon Dissociation (IRMPD) spectroscopy of cationic phenanthrene, pyrene, and perylene over the 100$-$1700 cm$^{-1}$ (6-95 $μ$m) spectral range. This range covers both local vibrational modes involving C$-$C and C$-$H bonds in the mid-IR, and large-amplitude skeletal modes in the far-IR. The experiments were done using the 7T Fourier-Transform Ion Cyclotron Resonance (FTICR) mass spectrometer integrated in the Free-Electron Laser for Intra-Cavity Experiments (FELICE), and findings were complemented with Density Functional Theory (DFT) calculated harmonic and anharmonic spectra, matching the experimental spectra well. The experimental configuration that enables this sensitive spectroscopy of the strongly-bound, photo-resistant Polycyclic Aromatic Hydrocarbons (PAHs) over a wide range can provide such high photon densities that even combination modes with calculated intensities as low as 0.01 km$\cdot$mol$^{-1}$ near 400 cm$^{-1}$ (25 $μ$m) can be detected. Experimental frequencies from this work and all currently available IRMPD spectra for PAH cations were compared to theoretical frequencies from the NASA Ames PAH IR Spectroscopic Database to verify predicted trends for far-IR vibrational modes depending on PAH shape and size, and only a relatively small redshift (6$-$11 cm$^{-1}$) was found between experiment and theory. The absence of spectral congestion and the drastic reduction in bandwidth with respect to the mid-IR make the far-IR fingerprints viable candidates for theoretical benchmarking, which can aid in the search for individual large PAHs in the interstellar medium. △ Less

Submitted 16 November, 2021; originally announced November 2021.

Comments: to be submitted to the Monthly Notices of the Royal Astronomical Society

IRMPD spectroscopy of a PAH cation using FELICE: The infrared spectrum and photodissociation of dibenzo[a,l]pyrene

Authors: Sandra Denise Wiersma, Alessandra Candian, Mathias Rapacioli, Annemieke Petrignani

Abstract: We present the experimental InfraRed Multiple Photon Dissociation (IRMPD) spectrum and fragmentation mass spectrum of the irregular, cationic PAH dibenzo[a,l]pyrene (C$_{24}$H$_{14}^+$) in the 6-40 $μ$m / 250-1650 cm$^{-1}$ range. The use of the the Free-Electron Laser for IntraCavity Experiments (FELICE) enabled us to record its Far-InfraRed (FIR) spectrum for the first time. We aim to understand… ▽ More We present the experimental InfraRed Multiple Photon Dissociation (IRMPD) spectrum and fragmentation mass spectrum of the irregular, cationic PAH dibenzo[a,l]pyrene (C$_{24}$H$_{14}^+$) in the 6-40 $μ$m / 250-1650 cm$^{-1}$ range. The use of the the Free-Electron Laser for IntraCavity Experiments (FELICE) enabled us to record its Far-InfraRed (FIR) spectrum for the first time. We aim to understand how irregularity affects the infrared spectrum and fragmentation chemistry of PAHs. Dibenzo[a,l]pyrene is an asymmetric, non-planar molecule, for which all vibrational modes are in principle IR-active. Calculated harmonic Density Function Theory (DFT) and anharmonic Density Functional based Tight Binding Molecular Dynamics (DFTB-MD) spectra show a large wealth of bands, which match the experiment well, but with a few differences. The periphery of the molecule contains several edge geometries, but out of all possible modes in the 11-14 $μ$m out-of-plane C-H bending region, only one band at 13.5 $μ$m is prominent. This fact and the richness of the C-C stretching range make irregular PAHs a possible contributor to D-class interstellar spectra. The fragmentation mass spectra reveal facile 2H-loss and no [2C, 2H]-loss, which is attributed to the sterically hindered, non-planar cove region, which could protect irregular PAHs from radiation damage. △ Less

Submitted 18 October, 2021; originally announced October 2021.

Comments: Accepted for publication in The Journal of Molecular Spectroscopy

Improving the efficiency of small animal 3D printed compensator IMRT with beamlet intensity total variation regularization

Authors: Xinmin Liu, Alexander L. Van Slyke, Erik Pearson, Khayrullo Shoniyozov, Gage Redler, Rodney D. Wiersma

Abstract: Purpose: There is growing interest in the use of modern 3D printing technology to implement intensity-modulated radiation therapy (IMRT) on the preclinical scale which is analogous to clinical IMRT. However, current 3D-printed IMRT methods suffer from complex modulation patterns leading to long delivery times, excess filament usage, and inaccurate compensator fabrication. In this work, we have dev… ▽ More Purpose: There is growing interest in the use of modern 3D printing technology to implement intensity-modulated radiation therapy (IMRT) on the preclinical scale which is analogous to clinical IMRT. However, current 3D-printed IMRT methods suffer from complex modulation patterns leading to long delivery times, excess filament usage, and inaccurate compensator fabrication. In this work, we have developed a total variation regularization (TVR) approach to address these issues. Methods: TVR-IMRT, a technique designed to minimize the intensity difference between neighboring beamlets, was used to optimize the beamlet intensity map, which was then converted to corresponding compensator thicknesses in copper-doped PLA filament. IMRT and TVR-IMRT plans using five beams were generated to treat a mouse heart while sparing lung tissue. The individual field doses and composite dose were delivered to film and compared to the corresponding planned doses using gamma analysis. Results: TVR-IMRT reduced the total variation of both the beamlet intensities and compensator thicknesses by around 50% when compared to standard 3D printed compensator IMRT. The total mass of compensator material consumed and radiation beam-on time were reduced by 20-30%, while DVHs remained comparable. Gamma analysis passing rate with 3%/0.3mm criterion was 89.07% for IMRT and 95.37% for TVR-IMRT. Conclusion: TVR can be applied to small animal IMRT beamlet intensities in order to produce fluence maps and subsequent 3D-printed compensator patterns with less total variation, simplifying 3D printing and reducing the amount of filament required. The TVR-IMRT plan required less beam-on time while maintaining the dose conformity when compared to a traditional IMRT plan. △ Less

Submitted 27 July, 2021; v1 submitted 1 July, 2021; originally announced July 2021.

IR photofragmentation of the Phenyl Cation: Spectroscopy and Fragmentation Pathways

Authors: S. D. Wiersma, A. Candian, J. M. Bakker, G. Berden, J. R. Eyler, J. Oomens, A. G. G. M. Tielens, A. Petrignani

Abstract: We present the gas-phase infrared spectra of the phenyl cation, phenylium, in its perprotio C$_6$H$_5^+$ and perdeutero C$_6$D$_5^+$ forms, in the 260-1925 cm$^{-1}$ (5.2-38 $μ$m) spectral range, and investigate the observed photofragmentation. The spectral and fragmentation data were obtained using Infrared Multiple Photon Dissociation (IRMPD) spectroscopy within a Fourier Transform Ion Cyclotron… ▽ More We present the gas-phase infrared spectra of the phenyl cation, phenylium, in its perprotio C$_6$H$_5^+$ and perdeutero C$_6$D$_5^+$ forms, in the 260-1925 cm$^{-1}$ (5.2-38 $μ$m) spectral range, and investigate the observed photofragmentation. The spectral and fragmentation data were obtained using Infrared Multiple Photon Dissociation (IRMPD) spectroscopy within a Fourier Transform Ion Cyclotron Resonance Mass Spectrometer (FTICR MS) located inside the cavity of the free electron laser FELICE (Free Electron Laser for Intra-Cavity Experiments). The $^1$A$_1$ singlet nature of the phenylium ion is ascertained by comparison of the observed IR spectrum with DFT calculations, using both harmonic and anharmonic frequency calculations. To investigate the observed loss of predominantly [2C,nH] (n=2-4) fragments, we explored the potential energy surface (PES) to unravel possible isomerization and fragmentation reaction pathways. The lowest energy pathways toward fragmentation include direct H elimination, and a combination of facile ring-opening mechanisms ($\leq2.4$ eV), followed by elimination of H or CCH$_2$. Energetically, all H-loss channels found are more easily accessible than CCH$_2$-loss. Calculations of the vibrational density of states for the various intermediates show that at high internal energies, ring opening is the thermodynamically the most advantageous, eliminating direct H-loss as a competing process. The observed loss of primarily [2C,2H] can be explained through entropy calculations that show favored loss of [2C,2H] at higher internal energies. △ Less

Submitted 12 February, 2021; originally announced February 2021.

Comments: 10 pages, 6 figures and 1 table. Accepted for publication on PCCP on 04 Feb 2021; supplementary Material available on PCCP website

Spatial coherence of light inside three dimensional media

Authors: Marco Leonetti, Lorenzo Pattelli, Simone De Panfilis, Diederik S. Wiersma, Giancarlo Ruocco

Abstract: Speckle is maybe the most fundamental interference effect of light in disordered media, giving rise to fascinating physical phenomena and enabling applications in imaging, spectroscopy or cryptography, to name a few. While speckle formed outside a sample is easily measured and analysed, true bulk speckle, as formed inside random media, is difficult to investigate directly due to the obvious issue… ▽ More Speckle is maybe the most fundamental interference effect of light in disordered media, giving rise to fascinating physical phenomena and enabling applications in imaging, spectroscopy or cryptography, to name a few. While speckle formed outside a sample is easily measured and analysed, true bulk speckle, as formed inside random media, is difficult to investigate directly due to the obvious issue of physical access. Furthermore, its proper theoretical description poses enormous challenges. Here we report on the first direct measurements of intensity correlations of light inside a disordered medium, using embedded DNA strings decorated with emitters separated by a controlled nanometric distance. Our method provides in situ access to fundamental properties of bulk speckles as their size and polarization degrees of freedom, both of which are found to deviate significantly from theoretical predictions. The deviations are explained, by comparison with rigorous numerical calculations, in terms of correlations among polarization components and non-universal near-field contributions at the nanoscale. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Journal ref: Nature Communications volume 12, Article number: 4199 (2021)

Generalized bioinspired approach to a daytime radiative cooling "skin"

Authors: Meng Yang, Weizhi Zou, Jing Guo, Zhenchao Qian, Heng Luo, Shijia Yang, Ning Zhao, Lorenzo Pattelli, Jian Xu, Diederik S. Wiersma

Abstract: Energy-saving cooling materials with strong operability are desirable towards sustainable thermal management. Inspired by the cooperative thermo-optical effect in fur of polar bear, we develop a flexible and reusable cooling skin via laminating a polydimethylsiloxane film with a highly-scattering polyethylene aerogel. Owing to its high porosity of 97.9% and tailored pore size of 3.8 +- 1.4 microme… ▽ More Energy-saving cooling materials with strong operability are desirable towards sustainable thermal management. Inspired by the cooperative thermo-optical effect in fur of polar bear, we develop a flexible and reusable cooling skin via laminating a polydimethylsiloxane film with a highly-scattering polyethylene aerogel. Owing to its high porosity of 97.9% and tailored pore size of 3.8 +- 1.4 micrometers, superior solar reflectance of 0.96 and high transparency to irradiated thermal energy of 0.8 can be achieved at a thickness of 2.7 mm. Combined with low thermal conductivity of 0.032 W/m/K of the aerogel, the cooling skin exerts midday sub-ambient temperature drops of 5-6 degrees in a metropolitan environment, with an estimated limit of 14 degrees under ideal service conditions. We envision that this generalized bilayer approach will construct a bridge from night-time to daytime radiative cooling and pave the way for economical, scalable, flexible and reusable cooling materials. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 15 pages, 4 figures, of which another version has been accepted by ACS ami but not published yet

Diagnostics and characterization of photonic circuits by wide-field spatio-temporal imaging

Authors: Dmitry Nuzhdin, Lorenzo Pattelli, Sara Nocentini, Diederik S. Wiersma

Abstract: The growing diffusion of integrated photonic technologies requires fast and non-invasive quality control techniques for mass-production. We present a general diagnostic technique for sub-ps imaging of photonic circuits combining wide-field optical microscopy and optical gating. The simultaneous access to multiple parameters of a photonic structure enables an unprecedented characterization of its f… ▽ More The growing diffusion of integrated photonic technologies requires fast and non-invasive quality control techniques for mass-production. We present a general diagnostic technique for sub-ps imaging of photonic circuits combining wide-field optical microscopy and optical gating. The simultaneous access to multiple parameters of a photonic structure enables an unprecedented characterization of its functional design as opposed to typical single-domain techniques such as frequency or time domain reflectometry and near-field microscopy. The non-contact and non-perturbative nature of the technique makes it relevant for both planar and three-dimensional circuits, as well as for silicon, polymeric or hybrid platforms. We apply our technique to different photonic chip components fabricated by Direct Laser Writing, revealing the spatial and temporal hallmarks of fabrication imperfections causing losses or deviations from the intended device behavior. At the same time, the technique allows in situ probing of key properties of photonic devices as the local propagation constants of guided modes or the quality factor of resonant elements. Our method is relevant for both the scientific and the industrial communities as it lends itself to be scaled up to in-line quality control thanks to its non-scanning nature. △ Less

Submitted 9 May, 2020; originally announced May 2020.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in ACS Photonics, copyright \c{opyright} American Chemical Society after peer review. The final edited and published work is available at https://dx.doi.org/10.1021/acsphotonics.0c00271

Photolysis-induced scrambling of PAHs as a mechanism for deuterium storage

Authors: S. D. Wiersma, A. Candian, J. M. Bakker, G. Berden, J. Oomens, W-J. Buma, A. Petrignani

Abstract: Aim. We investigate the role of PAHs as a sink for deuterium in the interstellar medium and study UV photolysis as a potential process in the variations of the deuterium fractionation in the ISM. Methods. The UV photo-induced fragmentation of various isotopologues of D-enriched, protonated anthracene and phenanthrene ions was recorded in a FTICR mass spectrometer. IRMPD spectroscopy using FELIX pr… ▽ More Aim. We investigate the role of PAHs as a sink for deuterium in the interstellar medium and study UV photolysis as a potential process in the variations of the deuterium fractionation in the ISM. Methods. The UV photo-induced fragmentation of various isotopologues of D-enriched, protonated anthracene and phenanthrene ions was recorded in a FTICR mass spectrometer. IRMPD spectroscopy using FELIX provided the IR spectra that were compared to DFT vibrational spectra; reaction barriers and rates were also calculated and related to the product abundances. Results. The mass spectra for both UV and IRMPD photolysis show the loss of H from [D-C$_{14}$H$_{10}$]$^+$, whereas [H-C$_{14}$D$_{10}$]$^+$ shows a strong preference for D loss. Calculations reveal facile 1,2-H and -D shift reactions, with barriers lower than the energy supplied by the photo-excitation process. Together with confirmation of the ground-state structures via the IR spectra, we determined that the photolytic processes in the 2 PAHs are largely governed by scrambling where the H and the D atoms relocate between different peripheral C atoms. The $\sim$0.1 eV difference in zero-point energy between C-H and C-D bonds ultimately leads to faster H scrambling than D scrambling, and increased H atom loss compared to D. Conclusion. Scrambling is common in PAH cations under UV radiation. Upon photoexcitation of deuterium-enriched PAHs, the scrambling results in a higher probability for the aliphatic D atom to migrate to an aromatic site, protecting it from elimination. This could lead to increased deuteration as a PAH moves towards more exposed interstellar environments. Also, large, compact PAHs with an aliphatic C-HD group on solo sites might be responsible for the majority of aliphatic C-D stretching bands seen in astronomical spectra. △ Less

Submitted 27 January, 2020; originally announced January 2020.

Comments: 13 pages, 5 figures. Abstract abridged to meet ArXiv size limit. Accepted for publications in A&A

Quantum optics with single molecules in a three-dimensional polymeric platform

Authors: Maja Colautti, Pietro E. Lombardi, Marco Trapuzzano, Francesco S. Piccioli, Sofia Pazzagli, Bruno Tiribilli, Sara Nocentini, Francesco S. Cataliotti, Diederik Wiersma, Costanza Toninelli

Abstract: The successful development of future photonic quantum technologies heavily depends on the possibility of realizing robust, reliable and, crucially, scalable nanophotonic devices. In integrated networks, quantum emitters can be deployed as single-photon sources or non-linear optical elements, provided their transition linewidth is broadened only by spontaneous emission. However, conventional fabric… ▽ More The successful development of future photonic quantum technologies heavily depends on the possibility of realizing robust, reliable and, crucially, scalable nanophotonic devices. In integrated networks, quantum emitters can be deployed as single-photon sources or non-linear optical elements, provided their transition linewidth is broadened only by spontaneous emission. However, conventional fabrication approaches are hardly scalable, typically detrimental for the emitter coherence properties and bear limitations in terms of geometries and materials. Here we introduce an alternative platform, based on molecules embedded in polymeric photonic structures. Three-dimensional patterns are achieved via direct laser writing around selected molecular emitters, which preserve near-Fourier-limited fluorescence. By using an integrated polymeric design, record-high photon fluxes from a single cold molecule are reported. The proposed technology allows to conceive a novel class of quantum devices, including integrated multi-photon interferometers, arrays of indistinguishable single photon sources and hybrid electro-optical nanophotonic devices. △ Less

Submitted 16 September, 2019; originally announced September 2019.

Comments: 11 pages, 5 figures

Biomimetic Polymer Film with Brilliant Brightness Using a One-Step Water Vapor-Induced Phase Separation Method

Authors: Weizhi Zou, Lorenzo Pattelli, Jing Guo, Shijia Yang, Meng Yang, Ning Zhao, Jian Xu, Diederik S. Wiersma

Abstract: The scales of the white Cyphochilus beetles are endowed with unusual whiteness arising from the exceptional scattering efficiency of their disordered ultrastructure optimized through millions of years of evolution. Here, a simple, one-step method based on water vapor-induced phase separation (VIPS) is developed to prepare ultra-thin polystyrene (PS) films with similar microstructure and comparable… ▽ More The scales of the white Cyphochilus beetles are endowed with unusual whiteness arising from the exceptional scattering efficiency of their disordered ultrastructure optimized through millions of years of evolution. Here, a simple, one-step method based on water vapor-induced phase separation (VIPS) is developed to prepare ultra-thin polystyrene (PS) films with similar microstructure and comparable optical performance. A typical biomimetic 3.5 um PS film exhibits a diffuse reflectance of 61% at 500 nm, which translates into a transport mean free path below 1 um. A complete optical characterization through Monte Carlo simulations reveals how such scattering performance arises from the scattering coefficient and scattering anisotropy, whose interplay provides insight into the morphological properties of the material. The potential of bright-white coatings as smart sensors or wearable devices is highlighted using a treated ultra-thin film as a real-time sensor for human exhalation. △ Less

Submitted 11 June, 2019; originally announced June 2019.

Comments: Pre-peer review version, paper published in final form at https://doi.org/10.1002/adfm.201808885

Journal ref: Adv. Funct. Mater. 2019, 29(23), 1808885

Multichannel remote polarization control enabled by nanostructured Liquid Crystalline Networks

Authors: Simone Zanotto, Fabrizio Sgrignuoli, Sara Nocentini, Daniele Martella, Camilla Parmigiani, Diederik S. Wiersma

Abstract: In this article we demonstrate that a grating fabricated through nanoscale volumetric crosslinking of a liquid crystalline polymer enables remote polarization control over the diffracted channels. This functionality is a consequence of the responsivity of liquid crystal networks upon light stimuli. Tuning the photonic response of the device is obtained thanks to both a refractive index and a shape… ▽ More In this article we demonstrate that a grating fabricated through nanoscale volumetric crosslinking of a liquid crystalline polymer enables remote polarization control over the diffracted channels. This functionality is a consequence of the responsivity of liquid crystal networks upon light stimuli. Tuning the photonic response of the device is obtained thanks to both a refractive index and a shape change of the grating elements induced by a molecular rearrangement under irradiation. In particular, the material anisotropy allows for nontrivial polarization state management over multiple beams. Absence of any liquid component and a time response down to 0.2 milliseconds make our device appealing in the fields of polarimetry and optical communications. △ Less

Submitted 8 June, 2019; originally announced June 2019.

Comments: 16 pages,8 figures, featured article in ALP

Journal ref: ALP, 114,201103, (2019)

Optimized White Reflectance in Photonic Network Structures

Authors: Francesco Utel, Lorenzo Cortese, Diederik S. Wiersma, Lorenzo Pattelli

Abstract: Three-dimensional disordered networks are receiving increasing attention as versatile architectures for highly scattering materials. However, due to their complex morphology, little is still known about the interplay between their structural and optical properties. Here, we describe a simple algorithm that allows to generate photonic network structures inspired by that of the Cyphochilus beetle, f… ▽ More Three-dimensional disordered networks are receiving increasing attention as versatile architectures for highly scattering materials. However, due to their complex morphology, little is still known about the interplay between their structural and optical properties. Here, we describe a simple algorithm that allows to generate photonic network structures inspired by that of the Cyphochilus beetle, famous for the bright white reflectance of its thin cuticular scales. The model allows to vary the degree of structural anisotropy and filling fraction of the network independently, revealing the key contribution of these two parameters to the overall scattering efficiency. Rigorous numerical simulations show that the obtained structures can exceed the broadband reflectance of the beetle while using less material, providing new insights for the design of advanced scattering materials. △ Less

Submitted 26 May, 2020; v1 submitted 28 May, 2019; originally announced May 2019.

Comments: 10 pages, 3 figures. peer reviewed version, published in final form at https://doi.org/10.1002/adom.201900043

Journal ref: Advanced Optical Materials 2019, 7, 1900043

A conceptual study on real-time adaptive radiation therapy optimization through ultra-fast beamlet control

Authors: Rodney D. Wiersma, Xinmin Liu

Abstract: A central problem in the field of radiation therapy (RT) is how to optimally deliver dose to a patient in a way that fully accounts for anatomical position changes over time. As current RT is a static process, where beam intensities are calculated before the start of treatment, anatomical deviations can result in poor dose conformity. To overcome these limitations, we present a simulation study on… ▽ More A central problem in the field of radiation therapy (RT) is how to optimally deliver dose to a patient in a way that fully accounts for anatomical position changes over time. As current RT is a static process, where beam intensities are calculated before the start of treatment, anatomical deviations can result in poor dose conformity. To overcome these limitations, we present a simulation study on a fully dynamic real-time adaptive radiation therapy (RT-ART) optimization approach that uses ultra-fast beamlet control to dynamically adapt to patient motion in real-time. A virtual RT-ART machine was simulated with a rapidly rotating linear accelerator (LINAC) source (60 RPM) and a binary 1D multi-leaf collimator (MLC) operating at 100 Hz. If the real-time tracked target motion exceeded a predefined threshold, a time dependent objective function was solved using fast optimization methods to calculate new beamlet intensities that were then delivered to the patient. To evaluate the approach, system response was analyzed for patient derived continuous drift, step-like, and periodic intra-fractional motion. For each motion type investigated, the RT-ART method was compared against the ideal case with no patient motion (static case) as well as to the case without the use RT-ART. In all cases, isodose lines and dose-volume-histograms (DVH) showed that RT-ART plan quality was approximately the same as the static case, and considerably better than the no RT-ART case. The RT-ART optimization framework has the potential to optimally deliver dose to a patient in a way that fully accounts for anatomical changes due to motion. With continued advances in real-time patient motion tracking and fast computational processes, there is significant potential for the RT-ART optimization process to be realized on next generation RT machines. △ Less

Submitted 1 September, 2019; v1 submitted 8 November, 2018; originally announced November 2018.

Journal ref: https://iopscience.iop.org/article/10.1088/2057-1976/ab3ba9

Structured Optical Materials Controlled by Light

Authors: Sara Nocentini, Daniele Martella, Camilla Parmeggiani, Simone Zanotto, Diederik S. Wiersma

Abstract: Materials of which the optical response is determined by their structure are of much interest both for their fundamental properties and applications. Examples range from simple gratings to photonic crystals. Obtaining control over the optical properties is of crucial importance in this context, and it is often attempted by electro-optical effect or by using magnetic fields. In this paper, we intro… ▽ More Materials of which the optical response is determined by their structure are of much interest both for their fundamental properties and applications. Examples range from simple gratings to photonic crystals. Obtaining control over the optical properties is of crucial importance in this context, and it is often attempted by electro-optical effect or by using magnetic fields. In this paper, we introduce the use of light to switch and tune the optical response of a structured material, exploiting a physical deformation induced by light itself. In this new strategy, light drives an elastic reshaping, which leads to different spectral properties and hence to a change in the optical response. This is made possible by the use of liquid crystalline networks structured by Direct Laser Writing. As a proof of concept, a grating structure with sub-millisecond time-response is demonstrated for optical beam steering exploiting an optically induced reversible shape-change. Experimental observations are combined with finite-element modeling to understand the actuation process dynamics and to obtain information on how to tune the time and the power response of this technology. This optical beam steerer serves as an example for achieving full optical control of light in broad range of structured optical materials. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Journal ref: Advanced Optical Materials, 2018, 1800167

Trajectory planning optimization for real-time 6DOF robotic patient motion compensation

Authors: Rodney D. Wiersma, Xinmin Liu

Abstract: We present for the first time a general 6DoF trajectory planning method that can be used in real-time image guided radiation therapy procedures for robotic stabilization of dynamically moving tumor targets. As the radiation beam is always on during the motion compensation process, it is mandatory that the 6D correction trajectory is optimal both spatially and temporally in order to maximize radiat… ▽ More We present for the first time a general 6DoF trajectory planning method that can be used in real-time image guided radiation therapy procedures for robotic stabilization of dynamically moving tumor targets. As the radiation beam is always on during the motion compensation process, it is mandatory that the 6D correction trajectory is optimal both spatially and temporally in order to maximize radiation to the tumor and minimize unintentional irradiation of healthy tissues. Unlike prior works, which relied on motion control approaches as PID or other controllers, this work presents the concept of motion planning, where all potential 6D trajectories are searched using ultrafast optimization methods and the best trajectory is chosen. As the method formulates the problem as an objective function to be solved, it allows high flexibility in that users can optimize various performance requirements such as mechanical robot limits, patient velocities, or other aspects that must operate within certain limits in order to ensure a safe medical process. △ Less

Submitted 10 August, 2018; originally announced August 2018.

CELES: CUDA-accelerated simulation of electromagnetic scattering by large ensembles of spheres

Authors: Amos Egel, Lorenzo Pattelli, Giacomo Mazzamuto, Diederik S. Wiersma, Uli Lemmer

Abstract: CELES is a freely available MATLAB toolbox to simulate light scattering by many spherical particles. Aiming at high computational performance, CELES leverages block-diagonal preconditioning, a lookup-table approach to evaluate costly functions and massively parallel execution on NVIDIA graphics processing units using the CUDA computing platform. The combination of these techniques allows to effici… ▽ More CELES is a freely available MATLAB toolbox to simulate light scattering by many spherical particles. Aiming at high computational performance, CELES leverages block-diagonal preconditioning, a lookup-table approach to evaluate costly functions and massively parallel execution on NVIDIA graphics processing units using the CUDA computing platform. The combination of these techniques allows to efficiently address large electrodynamic problems ($>10^4$ scatterers) on inexpensive consumer hardware. In this paper, we validate near- and far-field distributions against the well-established multi-sphere $T$-matrix (MSTM) code and discuss the convergence behavior for ensembles of different sizes, including an exemplary system comprising $10^5$ particles. △ Less

Submitted 6 June, 2017; originally announced June 2017.

Journal ref: Journal of Quantitative Spectroscopy and Radiative Transfer, Volume 199, September 2017, Pages 103-110, ISSN 0022-4073

Spatio-temporal visualization of light transport in complex photonic structures

Authors: Lorenzo Pattelli, Romolo Savo, Matteo Burresi, Diederik S. Wiersma

Abstract: Spatio-temporal imaging of light propagation is very important in photonics because it provides the most direct tool available to study the interaction between light and its host environment. Sub-ps time resolution is needed to investigate the fine and complex structural features that characterize disordered and heterogeneous structures, which are responsible for a rich array of transport physics… ▽ More Spatio-temporal imaging of light propagation is very important in photonics because it provides the most direct tool available to study the interaction between light and its host environment. Sub-ps time resolution is needed to investigate the fine and complex structural features that characterize disordered and heterogeneous structures, which are responsible for a rich array of transport physics that have not yet been fully explored. A newly developed wide-field imaging system enables us to present a spatio-temporal study on light transport in various disordered media, revealing properties that could not be properly assessed using standard techniques. By extending our investigation to an almost transparent membrane, a configuration that has been difficult to characterize until now, we unveil the peculiar physics exhibited by such thin scattering systems with transport features that go beyond mainstream diffusion modeling, despite the occurrence of multiple scattering. △ Less

Submitted 16 June, 2016; v1 submitted 18 September, 2015; originally announced September 2015.

Comments: text updated to final revision. updated list of references

Journal ref: Light: Science & Applications (2016) 5, e16090

Diffusion of light in semitransparent media

Authors: Lorenzo Pattelli, Giacomo Mazzamuto, Diederik Wiersma, Costanza Toninelli

Abstract: Light diffusion is usually associated with thick, opaque media. Indeed, multiple scattering is necessary for the onset of the diffusive regime and such condition is generally not met in almost transparent media. Nonetheless, at long enough times, transport in an infinite thin slab is still determined by a multiple scattering process whose complete characterization is lacking. In this paper we show… ▽ More Light diffusion is usually associated with thick, opaque media. Indeed, multiple scattering is necessary for the onset of the diffusive regime and such condition is generally not met in almost transparent media. Nonetheless, at long enough times, transport in an infinite thin slab is still determined by a multiple scattering process whose complete characterization is lacking. In this paper we show that, after a short transient, the mean square width of the transmitted intensity still exhibits a simple linear increase with time as predicted by diffusion theory, even at optical thickness as low as one. Interestingly, such linear growth is predicted not to depend neither on the slab thickness nor on its refractive index contrast, yet the accuracy of this simple approximation in the ballistic-to-diffusive regime hasn't been investigated so far. By means of Monte Carlo simulations, we find clear evidence that boundary conditions play an active role in redefining the very asymptotic value of the diffusion coefficient by directly modifying the statistical distributions underlying light transport in such media. In this respect, we demonstrate the need to distinguish between a set of intrinsic and effective transport parameters, whose relation and interplay with boundary conditions remains to be fully understood. △ Less

Submitted 21 September, 2015; v1 submitted 14 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. A 94, 043846 (2016)

Deducing effective light transport parameters in optically thin systems

Authors: Giacomo Mazzamuto, Lorenzo Pattelli, Costanza Toninelli, Diederik Wiersma

Abstract: We present an extensive Monte Carlo study on light transport in optically thin slabs, addressing both axial and transverse propagation. We completely characterize the so-called ballistic-to-diffusive transition, notably in terms of the spatial variance of the transmitted/reflected profile. We test the validity of the prediction cast by diffusion theory, that the spatial variance should grow indepe… ▽ More We present an extensive Monte Carlo study on light transport in optically thin slabs, addressing both axial and transverse propagation. We completely characterize the so-called ballistic-to-diffusive transition, notably in terms of the spatial variance of the transmitted/reflected profile. We test the validity of the prediction cast by diffusion theory, that the spatial variance should grow independently of absorption and, to a first approximation, of the sample thickness and refractive index contrast. Based on a large set of simulated data, we build a freely available look-up table routine allowing reliable and precise determination of the microscopic transport parameters starting from robust observables which are independent of absolute intensity measurements. We also present the Monte Carlo software package that was developed for the purpose of this study. △ Less

Submitted 21 September, 2015; v1 submitted 14 September, 2015; originally announced September 2015.

Path length enhancement in disordered media for increased absorption

Authors: Rajeshkumar Mupparapu, Kevin Vynck, Tomas Svensson, Matteo Burresi, Diederik S. Wiersma

Abstract: We theoretically and numerically investigate the capability of disordered media to enhance the optical path length in dielectric slabs and augment their light absorption efficiency due to scattering. We first perform a series of Monte Carlo simulations of random walks to determine the path length distribution in weakly to strongly (single to multiple) scattering, non-absorbing dielectric slabs und… ▽ More We theoretically and numerically investigate the capability of disordered media to enhance the optical path length in dielectric slabs and augment their light absorption efficiency due to scattering. We first perform a series of Monte Carlo simulations of random walks to determine the path length distribution in weakly to strongly (single to multiple) scattering, non-absorbing dielectric slabs under normally incident light and derive analytical expressions for the path length enhancement in these two limits. Quite interestingly, while multiple scattering is expected to produce long optical paths, we find that media containing a vanishingly small amount of scatterers can still provide high path length enhancements due to the very long trajectories sustained by total internal reflection at the slab interfaces. The path length distributions are then used to calculate the light absorption efficiency of media with varying absorption coefficients. We find that maximum absorption enhancement is obtained at an optimal scattering strength, in-between the single-scattering and the diffusive (strong multiple-scattering) regimes. This study can guide experimentalists towards more efficient and potentially low-cost solutions in photovoltaic technologies. △ Less

Submitted 4 September, 2015; v1 submitted 13 July, 2015; originally announced July 2015.

Journal ref: Opt. Express 23, A1472 (2015)

Walk dimension for light in complex disordered media

Authors: Romolo Savo, Matteo Burresi, Tomas Svensson, Kevin Vynck, Diederik S. Wiersma

Abstract: Transport in complex systems is characterized by a fractal dimension -- the walk dimension -- that indicates the diffusive or anomalous nature of the underlying random walk process. Here we report on the experimental retrieval of this key quantity, using light waves propagating in disordered media. The approach is based on measurements of the time-resolved transmission, in particular on how the li… ▽ More Transport in complex systems is characterized by a fractal dimension -- the walk dimension -- that indicates the diffusive or anomalous nature of the underlying random walk process. Here we report on the experimental retrieval of this key quantity, using light waves propagating in disordered media. The approach is based on measurements of the time-resolved transmission, in particular on how the lifetime scales with sample size. We show that this allows one to retrieve the walk dimension and apply the concept to samples with varying degree of fractal heterogeneity. In addition, the method provides the first experimental demonstration of anomalous light dynamics in a random medium. △ Less

Submitted 21 August, 2014; v1 submitted 20 December, 2013; originally announced December 2013.

Journal ref: Phys. Rev. A 90, 023839 (2014)

Transport in quenched disorder: light diffusion in strongly heterogeneous turbid media

Authors: Tomas Svensson, Kevin Vynck, Erik Adolfsson, Andrea Farina, Antonio Pifferi, Diederik S. Wiersma

Abstract: We present a theoretical and experimental study of light transport in disordered media with strongly heterogeneous distribution of scatterers formed via non-scattering regions. Step correlations induced by quenched disorder are found to prevent diffusivity from diverging with increasing heterogeneity scale, contrary to expectations from annealed models. Spectral diffusivity is measured for a porou… ▽ More We present a theoretical and experimental study of light transport in disordered media with strongly heterogeneous distribution of scatterers formed via non-scattering regions. Step correlations induced by quenched disorder are found to prevent diffusivity from diverging with increasing heterogeneity scale, contrary to expectations from annealed models. Spectral diffusivity is measured for a porous ceramic where nanopores act as scatterers and macropores render their distribution heterogeneous. Results agree well with Monte Carlo simulations and a proposed analytical model. △ Less

Submitted 23 October, 2013; originally announced October 2013.

Comments: 12 pages, 9 figures (significant amount of supplemental information)

Journal ref: Phys. Rev. E 89, 022141 (2014)

Experimental and theoretical investigation of statistical regimes in random laser emission

Authors: Emilio Ignesti, Federico Tommasi, Lorenzo Fini, Stefano Lepri, Vivekananthan Radhalakshmi, Diederik Wiersma, Stefano Cavalieri

Abstract: We present a theoretical and experimental study aimed at characterizing statistical regimes in a random laser. Both the theoretical simulations and the experimental results show the possibility of three region of fluctuations increasing the pumping energy. An initial Gaussian regime is followed by a Lévy statistics and Gaussian statistic is recovered again for high pump pulse energy. These differe… ▽ More We present a theoretical and experimental study aimed at characterizing statistical regimes in a random laser. Both the theoretical simulations and the experimental results show the possibility of three region of fluctuations increasing the pumping energy. An initial Gaussian regime is followed by a Lévy statistics and Gaussian statistic is recovered again for high pump pulse energy. These different statistical regimes are possible in a weakly diffusive active medium, while the region of Lévy statistics disappears when the medium is strongly diffusive presenting always a Gaussian regime with smooth emission spectrum. Experiments and theory agree in identification of the key parameters determining the statistical regimes of the random laser. △ Less

Submitted 10 September, 2013; originally announced September 2013.

Journal ref: Phys. Rev. A 88, 033820 (2013)

Light transport and localization in two-dimensional correlated disorder

Authors: Gaurasundar M. Conley, Matteo Burresi, Filippo Pratesi, Kevin Vynck, Diederik S. Wiersma

Abstract: Structural correlations in disordered media are known to affect significantly the propagation of waves. In this article, we theoretically investigate the transport and localization of light in 2D photonic structures with short-range correlated disorder. The problem is tackled semi-analytically using the Baus-Colot model for the structure factor of correlated media and a modified independent scatte… ▽ More Structural correlations in disordered media are known to affect significantly the propagation of waves. In this article, we theoretically investigate the transport and localization of light in 2D photonic structures with short-range correlated disorder. The problem is tackled semi-analytically using the Baus-Colot model for the structure factor of correlated media and a modified independent scattering approximation. We find that short-range correlations make it possible to easily tune the transport mean free path by more than a factor of 2 and the related localization length over several orders of magnitude. This trend is confirmed by numerical finite-difference time-domain calculations. This study therefore shows that disorder engineering can offer fine control over light transport and localization in planar geometries, which may open new opportunities in both fundamental and applied photonics research. △ Less

Submitted 3 February, 2014; v1 submitted 7 July, 2013; originally announced July 2013.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 112, 143901 (2014)

Exploiting breakdown of the similarity relation for diffuse light transport: simultaneous retrieval of scattering anisotropy and diffusion constant

Authors: Tomas Svensson, Romolo Savo, Erik Alerstam, Kevin Vynck, Matteo Burresi, Diederik S. Wiersma

Abstract: As manifested in the similarity relation of diffuse light transport, it is difficult to assess single scattering characteristics from multiply scattered light. We take advantage of the limited validity of the diffusion approximation of light transport and demonstrate, experimentally and numerically, that even deep into the multiple scattering regime, time-resolved detection of transmitted light al… ▽ More As manifested in the similarity relation of diffuse light transport, it is difficult to assess single scattering characteristics from multiply scattered light. We take advantage of the limited validity of the diffusion approximation of light transport and demonstrate, experimentally and numerically, that even deep into the multiple scattering regime, time-resolved detection of transmitted light allows simultaneous assessment of both single scattering anisotropy and scattering mean free path, and therefore also macroscopic parameters like the diffusion constant and the transport mean free path. This is achieved via careful assessment of early light and matching against Monte Carlo simulations of radiative transfer. △ Less

Submitted 28 November, 2012; originally announced November 2012.

Journal ref: Opt. Lett. 38, 437-439 (2013)

Two-dimensional disorder for broadband, omnidirectional and polarization-insensitive absorption

Authors: Matteo Burresi, Filippo Pratesi, Kevin Vynck, Mauro Prasciolu, Massimo Tormen, Diederik S. Wiersma

Abstract: The surface of thin-film solar cells can be tailored with photonic nanostructures to allow light trapping in the absorbing medium. This in turn increases the optical thickness of the film and thus enhances their absorption. Such a coherent light trapping is generally accomplished with deterministic photonic architectures. Here, we experimentally explore the use of a different nanostructure, a diso… ▽ More The surface of thin-film solar cells can be tailored with photonic nanostructures to allow light trapping in the absorbing medium. This in turn increases the optical thickness of the film and thus enhances their absorption. Such a coherent light trapping is generally accomplished with deterministic photonic architectures. Here, we experimentally explore the use of a different nanostructure, a disordered one, for this purpose. We show that the disorder-induced modes in the film allow improvements in the absorption over a broad range of frequencies and impinging angles. △ Less

Submitted 27 November, 2012; originally announced November 2012.

Holey Random Walks: Optics of Heterogeneous Turbid Composites

Authors: Tomas Svensson, Kevin Vynck, Marco Grisi, Romolo Savo, Matteo Burresi, Diederik S. Wiersma

Abstract: We present a probabilistic theory of random walks in turbid media with non-scattering regions. It is shown that important characteristics such as diffusion constants, average step lengths, crossing statistics and void spacings can be analytically predicted. The theory is validated using Monte Carlo simulations of light transport in heterogeneous systems in the form of random sphere packings, and g… ▽ More We present a probabilistic theory of random walks in turbid media with non-scattering regions. It is shown that important characteristics such as diffusion constants, average step lengths, crossing statistics and void spacings can be analytically predicted. The theory is validated using Monte Carlo simulations of light transport in heterogeneous systems in the form of random sphere packings, and good agreement is found. The role of step correlations is discussed, and differences between unbounded and bounded systems are investigated. Our results are relevant to the optics of heterogeneous systems in general, and represent an important step forward in the understanding of media with strong (fractal) heterogeneity in particular. △ Less

Submitted 8 November, 2012; originally announced November 2012.

Journal ref: Phys. Rev. E 87, 022120 (2013)

Photon Management in Two-Dimensional Disordered Media

Authors: Kevin Vynck, Matteo Burresi, Francesco Riboli, Diederik S. Wiersma

Abstract: Elaborating reliable and versatile strategies for efficient light coupling between free space and thin films is of crucial importance for new technologies in energy efficiency. Nanostructured materials have opened unprecedented opportunities for light management, notably in thin-film solar cells. Efficient coherent light trapping has been accomplished through the careful design of plasmonic nanopa… ▽ More Elaborating reliable and versatile strategies for efficient light coupling between free space and thin films is of crucial importance for new technologies in energy efficiency. Nanostructured materials have opened unprecedented opportunities for light management, notably in thin-film solar cells. Efficient coherent light trapping has been accomplished through the careful design of plasmonic nanoparticles and gratings, resonant dielectric particles and photonic crystals. Alternative approaches have used randomly-textured surfaces as strong light diffusers to benefit from their broadband and wide-angle properties. Here, we propose a new strategy for photon management in thin films that combines both advantages of an efficient trapping due to coherent optical effects and broadband/wide-angle properties due to disorder. Our approach consists in the excitation of electromagnetic modes formed by multiple light scattering and wave interference in two-dimensional random media. We show, by numerical calculations, that the spectral and angular responses of thin films containing disordered photonic patterns are intimately related to the in-plane light transport process and can be tuned through structural correlations. Our findings, which are applicable to all waves, are particularly suited for improving the absorption efficiency of thin-film solar cells and can provide a novel approach for high-extraction efficiency light-emitting diodes. △ Less

Submitted 9 April, 2013; v1 submitted 21 February, 2012; originally announced February 2012.

Journal ref: Nature Materials, vol. 11, pp. 1017-1022 (2012)

Weak localization of light in superdiffusive random systems

Authors: Matteo Burresi, Vivekananthan Radhalakshmi, Romolo Savo, Jacopo Bertolotti, Kevin Vynck, Diederik S. Wiersma

Abstract: Lévy flights constitute a broad class of random walks that occur in many fields of research, from animal foraging in biology, to economy to geophysics. The recent advent of Lévy glasses allows to study Lévy flights in controlled way using light waves. This raises several questions about the influence of superdiffusion on optical interference effects like weak and strong localization. Super diffusi… ▽ More Lévy flights constitute a broad class of random walks that occur in many fields of research, from animal foraging in biology, to economy to geophysics. The recent advent of Lévy glasses allows to study Lévy flights in controlled way using light waves. This raises several questions about the influence of superdiffusion on optical interference effects like weak and strong localization. Super diffusive structures have the extraordinary property that all points are connected via direct jumps, meaning that finite-size effects become an essential part of the physical problem. Here we report on the experimental observation of weak localization in Lévy glasses and compare results with recently developed optical transport theory in the superdiffusive regime. Experimental results are in good agreement with theory and allow to unveil how light propagates inside a finite-size superdiffusive system. △ Less

Submitted 7 October, 2011; originally announced October 2011.

Photonic Crystals with Controlled Disorder

Authors: P. D. Garcia, R. Sapienza, C. Toninelli, C. Lopez, D. S. Wiersma

Abstract: Photonic crystals are extremely sensitive to structural disorder even to the point of completely losing their functionalities. While on one side this can be detrimental for applications in traditional optical devices, on the other side, it gives also rise to very interesting new physics and maybe even new applications. We propose a route to introduce disorder in photonic crystals in a controlled w… ▽ More Photonic crystals are extremely sensitive to structural disorder even to the point of completely losing their functionalities. While on one side this can be detrimental for applications in traditional optical devices, on the other side, it gives also rise to very interesting new physics and maybe even new applications. We propose a route to introduce disorder in photonic crystals in a controlled way, by creating a certain percentage of vacancies in the lattice. We show how the method works and what type of materials can be obtained this way. Also we characterize the resulting transport properties from various points of view, including measurements of the transport and scattering mean free path and the diffusion constant. △ Less

Submitted 5 November, 2010; originally announced November 2010.

Multiple scattering of light in superdiffusive media

Authors: Jacopo Bertolotti, Kevin Vynck, Diederik S. Wiersma

Abstract: Light transport in superdiffusive media of finite size is studied theoretically. The intensity Green's function for a slab geometry is found by discretizing the fractional diffusion equation and employing the eigenfunction expansion method. Truncated step length distributions and complex boundary conditions are considered. The profile of a coherent backscattering cone is calculated in the superdif… ▽ More Light transport in superdiffusive media of finite size is studied theoretically. The intensity Green's function for a slab geometry is found by discretizing the fractional diffusion equation and employing the eigenfunction expansion method. Truncated step length distributions and complex boundary conditions are considered. The profile of a coherent backscattering cone is calculated in the superdiffusion approximation. △ Less

Submitted 25 October, 2010; v1 submitted 10 March, 2010; originally announced March 2010.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. Lett. 105, 163902 (2010)

Statistical regimes of random laser fluctuations

Authors: Stefano Lepri, Stefano Cavalieri, Gian-Luca Oppo, Diederik S. Wiersma

Abstract: Statistical fluctuations of the light emitted from amplifying random media are studied theoretically and numerically. The characteristic scales of the diffusive motion of light lead to Gaussian or power-law (Levy) distributed fluctuations depending on external control parameters. In the Levy regime, the output pulse is highly irregular leading to huge deviations from a mean--field description. M… ▽ More Statistical fluctuations of the light emitted from amplifying random media are studied theoretically and numerically. The characteristic scales of the diffusive motion of light lead to Gaussian or power-law (Levy) distributed fluctuations depending on external control parameters. In the Levy regime, the output pulse is highly irregular leading to huge deviations from a mean--field description. Monte Carlo simulations of a simplified model which includes the population of the medium, demonstrate the two statistical regimes and provide a comparison with dynamical rate equations. Different statistics of the fluctuations helps to explain recent experimental observations reported in the literature. △ Less

Submitted 7 February, 2007; v1 submitted 6 November, 2006; originally announced November 2006.

Comments: Revised version, resubmitted to Physical Review A

A new chiral electro-optic effect: Sum-frequency generation from optically active liquids in the presence of a dc electric field

Authors: P. Fischer, K. Beckwitt, A. D. Buckingham, D. S. Wiersma, F. W. Wise

Abstract: We report the observation of sum-frequency signals that depend linearly on an applied electrostatic field and that change sign with the handedness of an optically active solution. This recently predicted chiral electro-optic effect exists in the electric-dipole approximation. The static electric field gives rise to an electric-field-induced sum-frequency signal (an achiral third-order process) t… ▽ More We report the observation of sum-frequency signals that depend linearly on an applied electrostatic field and that change sign with the handedness of an optically active solution. This recently predicted chiral electro-optic effect exists in the electric-dipole approximation. The static electric field gives rise to an electric-field-induced sum-frequency signal (an achiral third-order process) that interferes with the chirality-specific sum-frequency at second-order. The cross-terms linear in the electrostatic field constitute the effect and may be used to determine the absolute sign of second- and third-order nonlinear optical susceptibilities in isotropic media. △ Less

Submitted 24 June, 2003; originally announced June 2003.

Comments: Submitted to Physical Review

Journal ref: Phys. Rev. Lett. 91, 173901 (2003).

Observation of coherent backscattering of light by cold atoms

Authors: G. Labeyrie, C. A. Müller, D. S. Wiersma, Ch. Miniatura, R. Kaiser

Abstract: Coherent backscattering (CBS) of light waves by a random medium is a signature of interference effects in multiple scattering. This effect has been studied in many systems ranging from white paint to biological tissues. Recently, we have observed CBS from a sample of laser-cooled atoms, a scattering medium with interesting new properties. In this paper we discuss various effects, which have to b… ▽ More Coherent backscattering (CBS) of light waves by a random medium is a signature of interference effects in multiple scattering. This effect has been studied in many systems ranging from white paint to biological tissues. Recently, we have observed CBS from a sample of laser-cooled atoms, a scattering medium with interesting new properties. In this paper we discuss various effects, which have to be taken into account for a quantitative study of coherent backscattering of light by cold atoms. △ Less

Submitted 20 April, 2000; originally announced April 2000.

Comments: 25 pages LaTex2e, 17 figures, submitted to J. Opt. B: Quant. Semicl. Opt

Journal ref: J. Opt. B: Quantum Semiclass. Opt. 2, 672 (2000)