-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Optomechanical compensatory cooling mechanism with exceptional points
Authors:
Guo-Qing Qin,
Xuan Mao,
Hao Zhang,
Peng-Yu Wen,
Gui-Qin Li,
Dong Ruan,
Gui-Lu Long
Abstract:
The ground state cooling of Brillouin scattering optomechanical system is limited by defects in practical sample. In this paper, we propose a new compensatory cooling mechanism for Brillouin scattering optomechanical system with exceptional points (EPs). By using the EPs both in optical and mechanical modes, the limited cooling process is compensated effectively. The dual-EPs system, which is disc…
▽ More
The ground state cooling of Brillouin scattering optomechanical system is limited by defects in practical sample. In this paper, we propose a new compensatory cooling mechanism for Brillouin scattering optomechanical system with exceptional points (EPs). By using the EPs both in optical and mechanical modes, the limited cooling process is compensated effectively. The dual-EPs system, which is discovered in this work for the first time, can be induced by two defects with specific relative angles and has function of not only actively manipulating the coupling strength of optical modes but also the Brillouin phonon modes. Our results provide new tools to manipulate the optomechanical interaction in multi-mode systems and open the possibility of quantum state transfer and quantum interface protocols based on phonon cooling in quantum applications.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Simultaneous ground-state cooling of multiple degenerate mechanical modes through cross-Kerr effect
Authors:
Pengyu Wen,
Xuan Mao,
Min Wang,
Chuan Wang,
Gui-Qin Li,
Gui-Lu Long
Abstract:
Simultaneous ground-state cooling of multiple degenerate mechanical modes is a tough issue in optomechanical system due to the existence of the dark mode effect. Here we propose a universal and scalable method to break the dark mode effect of two degenerate mechanical modes by introducing the cross-Kerr (CK) nonlinearity. At most four stable steady states can be achieved in our scheme in the prese…
▽ More
Simultaneous ground-state cooling of multiple degenerate mechanical modes is a tough issue in optomechanical system due to the existence of the dark mode effect. Here we propose a universal and scalable method to break the dark mode effect of two degenerate mechanical modes by introducing the cross-Kerr (CK) nonlinearity. At most four stable steady states can be achieved in our scheme in the presence of the CK effect, different from the bistable behavior of the standard optomechanical system. Under the constant input laser power, the effective detuning and mechanical resonant frequency can be modulated by the CK nonlinearity, which results in an optimal CK coupling strength for cooling. Similarly, there will be an optimal input laser power for cooling when the CK coupling strength stays fixed. Our scheme can be extended to break the dark mode effect of multiple degenerate mechanical modes by introducing more than one CK effects. To fulfill the requirement of the simultaneous ground-state cooling of N multiple degenerate mechanical modes N-1 CK effects with different strengths are needed. Our proposal provides new insights in dark mode control and might pave the way to manipulating of multiple quantum states in macroscopic system.
△ Less
Submitted 20 August, 2022;
originally announced August 2022.
-
Optomechanically induced transparency and directional amplification in a non-Hermitian optomechanical lattice
Authors:
Pengyu Wen,
Min Wang,
Gui-Lu Long
Abstract:
Cavity optomechanics is important in both quantum information processing and basic physics research. In this paper, we propose an optomechanical lattice which manifests non-Hermitian physics . We first use the non-Bloch band theory to investigate the energy spectrum and transmission property of an optomechanical lattice. The generalized Brillouin zone of the system is calculated with the help of t…
▽ More
Cavity optomechanics is important in both quantum information processing and basic physics research. In this paper, we propose an optomechanical lattice which manifests non-Hermitian physics . We first use the non-Bloch band theory to investigate the energy spectrum and transmission property of an optomechanical lattice. The generalized Brillouin zone of the system is calculated with the help of the resultant. And the periodical boundary condition (PBC) and open boundary condition energy spectrum are given, subsequently. By introducing probe laser on different sites we observed the directional amplification of the system. The direction of the amplification is analyzed combined with the non-Hermitian skin effect. The frequency that supports the amplification is analyzed by considering the PBC energy spectrum. By introducing probe laser on one site we investigate the onsite transmission property. Optomechanically induced transparency (OMIT) can be achieved in our system. By varying the parameters and size of the system, the OMIT peak can be effectively modulated or even turned into optomechanically induced amplification . Our system shows its potential as the function of a single-way signal filter. And our model can be extended to other non-Hermitian Bosonic model which may possess topological features and bipolar non-Hermitian skin effect.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Experimental demonstration of phase-matching and Sagnac effect in a millimeter-scale wedged resonator gyroscope
Authors:
Xuan Mao,
Hong Yang,
Dan Long,
Min Wang,
Peng-Yu Wen,
Yun-Qi Hu,
Bo-Yang Wang,
Gui-Qin Li,
Jian-Cun Gao,
Gui-Lu Long
Abstract:
The highly efficient coupling of light from conventional optical components to optical mode volumes lies in the heart of chip-based micro-devices, which is determined by the phase-matching between propagation constants of fiber taper and the whispering-gallery-mode (WGM) of the resonator. Optical gyroscopes, typically realized as fiber-optic gyroscopes and ring-laser gyroscopes, have been the main…
▽ More
The highly efficient coupling of light from conventional optical components to optical mode volumes lies in the heart of chip-based micro-devices, which is determined by the phase-matching between propagation constants of fiber taper and the whispering-gallery-mode (WGM) of the resonator. Optical gyroscopes, typically realized as fiber-optic gyroscopes and ring-laser gyroscopes, have been the mainstay in diverse applications such as positioning and inertial sensing. Here, the phase-matching is theoretically analyzed and experimentally verified. We observe Sagnac effect in a millimeter-scale wedged resonator gyroscope which has attracted considerable attention and been rapidly promoted in recent years. We demonstrate a bidirectional pump and probe scheme, which directly measures the frequency beat caused by the Sagnac effect. We establish the linear response between the detected beat frequency and the rotation velocity. The clockwise and counterclockwise rotation can also be distinguished according to the value of the frequency beat. The experimental results verify the feasibility of developing gyroscope in WGM resonator system and pave the way for future development.
△ Less
Submitted 13 May, 2022;
originally announced May 2022.
-
Thermal Simulation and Experimental Analysis of Optically Pumped InP-on-Si Micro- and Nanocavity Lasers
Authors:
Pengyan Wen,
Preksha Tiwari,
Markus Scherrer,
Emanuel Lörtscher,
Bernd Gotsmann,
Kirsten E. Moselund
Abstract:
There is a general trend of downscaling laser cavities, but with high integration and energy densities of nanocavity lasers, signifi-cant thermal issues affect their operation. The complexity of geometrical parameters and the various materials involved hinder the extraction of clear design guidelines and operation strategies. Here, we present a systematic thermal analysis of InP-on-Si micro- and n…
▽ More
There is a general trend of downscaling laser cavities, but with high integration and energy densities of nanocavity lasers, signifi-cant thermal issues affect their operation. The complexity of geometrical parameters and the various materials involved hinder the extraction of clear design guidelines and operation strategies. Here, we present a systematic thermal analysis of InP-on-Si micro- and nanocavity lasers based on steady-state and transient thermal simulations and experimental analysis. In particular, we investi-gated the use of metal cavities for improving the thermal properties of InP-on-Si micro- and nanocavity lasers. Heating of lasers is studied by using Raman thermometry and the results agree well with simulation results, both reveal a temperature reduction of hundreds of kelvins for the metal-clad cavity. Transient simulations are carried out to improve our understanding of the dynamic temperature variation under pulsed and continuous-wave pumping conditions. The results show that the presence of a metal clad-ding not only increases the overall efficiency in heat dissipation, but also causes a much faster temperature response. Together with optical experimental results under pulsed pumping, we conclude that a pulse width of 10 ns and repetition rate of 100 kHz is the optimal pumping condition for a 2 micrometer wide square cavity.
△ Less
Submitted 18 May, 2022; v1 submitted 12 December, 2021;
originally announced December 2021.
-
Waveguide coupled III-V photodiodes monolithically integrated on Si
Authors:
Pengyan Wen,
Preksha Tiwari,
Svenja Mauthe,
Heinz Schmid,
Marilyne Sousa,
Markus Scherrer,
Michael Baumann,
Bertold Ian Bitachon,
Juerg Leuthold,
Bernd Gotsmann,
Kirsten E. Moselund
Abstract:
The seamless integration of III-V nanostructures on silicon is a long-standing goal and an important step towards integrated optical links. In the present work, we demonstrate scaled and waveguide coupled III-V photodiodes monolithically integrated on Si, implemented as InP/In0.5Ga0.5As/InP p-i-n structure. The waveguide coupled devices show a dark current down to 0.048 A/cm2 at -1 V and a respons…
▽ More
The seamless integration of III-V nanostructures on silicon is a long-standing goal and an important step towards integrated optical links. In the present work, we demonstrate scaled and waveguide coupled III-V photodiodes monolithically integrated on Si, implemented as InP/In0.5Ga0.5As/InP p-i-n structure. The waveguide coupled devices show a dark current down to 0.048 A/cm2 at -1 V and a responsivity up to 0.2 A/W at -2 V. Using grating couplers centered around 1320 nm, we observed a cutoff frequency f3dB exceeding 70 GHz and data reception at 50 GBd with OOK and 4PAM. When operated in forward bias as light emitting diode, the devices emit light centered at 1550 nm. Furthermore, we also investigate the self-heating of the devices using scanning thermal microscopy and find a temperature increase of only ~15 K during the device operation as emitter, in accordance with thermal simulation results.
△ Less
Submitted 18 May, 2022; v1 submitted 28 May, 2021;
originally announced June 2021.
-
Scaling of Metal-Clad InP Nanodisk Lasers: Optical Performance and Thermal Effects
Authors:
Preksha Tiwari,
Pengyan Wen,
Daniele Caimi,
Svenja Mauthe,
Noelia Vico Triviño,
Marilyne Sousa,
Kirsten E. Moselund
Abstract:
A key component for optical on-chip communication is an efficient light source. However, to enable low energy per bit communication and local integration with Si CMOS, devices need to be further scaled down. In this work, we fabricate micro- and nanolasers of different shapes in InP by direct wafer bonding on Si. Metal-clad cavities have been proposed as means to scale dimensions beyond the diffra…
▽ More
A key component for optical on-chip communication is an efficient light source. However, to enable low energy per bit communication and local integration with Si CMOS, devices need to be further scaled down. In this work, we fabricate micro- and nanolasers of different shapes in InP by direct wafer bonding on Si. Metal-clad cavities have been proposed as means to scale dimensions beyond the diffraction limit of light by exploiting hybrid photonic-plasmonic modes. Here, we explore the size scalability of whispering-gallery mode light sources by cladding the sidewalls of the device with Au. The metal clad cavities demonstrate room temperature lasing upon optical excitation for Au-clad devices with InP diameters down to 300 nm, while the purely photonic counterparts show lasing only down to 500 nm. Numerical thermal simulations support the experimental findings and confirm an improved heat-sinking capability of the Au-clad devices, suggesting a reduction in device temperature of 473 K for the metal-clad InP nanodisk laser, compared to the one without Au. This would provide substantial performance benefits even in the absence of a hybrid photonic-plasmonic mode. These results give us insight into the benefits of metal-clad designs to downscale integrated lasers on Si.
△ Less
Submitted 8 September, 2020;
originally announced September 2020.
-
Coherent and incoherent theories for photosynthetic energy transfer
Authors:
Ming-Jie Tao,
Na-Na Zhang,
Peng-Yu Wen,
Fu-Guo Deng,
Qing Ai,
Gui-Lu Long
Abstract:
There is a remarkable characteristic of photosynthesis in nature, that is, the energy transfer efficiency is close to 100%. Recently, due to the rapid progress made in the experimental techniques, quantum coherent effects have been experimentally demonstrated. Traditionally, the incoherent theories are capable of calculating the energy transfer efficiency, e.g., (generalized) Förster theory and mo…
▽ More
There is a remarkable characteristic of photosynthesis in nature, that is, the energy transfer efficiency is close to 100%. Recently, due to the rapid progress made in the experimental techniques, quantum coherent effects have been experimentally demonstrated. Traditionally, the incoherent theories are capable of calculating the energy transfer efficiency, e.g., (generalized) Förster theory and modified Redfield theory. However, in order to describe the quantum coherent effects in photosynthesis, the coherent theories have been developed, such as hierarchical equation of motion, quantum path integral, coherent modified Redfield theory, small-polaron quantum master equation, and general Bloch-Redfield theory in addition to the Redfield theory. Here, we summarize the main points of the above approaches, which might be beneficial to the quantum simulation of quantum dynamics of exciton energy transfer in natural photosynthesis, and shed light on the design of artificial light-harvesting devices.
△ Less
Submitted 23 January, 2020; v1 submitted 8 July, 2019;
originally announced July 2019.
-
Luminosity measurements for the R scan experiment at BESIII
Authors:
M. Ablikim,
M. N. Achasov,
S. Ahmed,
X. C. Ai,
O. Albayrak,
M. Albrecht,
D. J. Ambrose,
A. Amoroso,
F. F. An,
Q. An,
J. Z. Bai,
O. Bakina,
R. Baldini Ferroli,
Y. Ban,
D. W. Bennett,
J. V. Bennett,
N. Berger,
M. Bertani,
D. Bettoni,
J. M. Bian,
F. Bianchi,
E. Boger,
I. Boyko,
R. A. Briere,
H. Cai
, et al. (405 additional authors not shown)
Abstract:
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measur…
▽ More
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements.
△ Less
Submitted 11 February, 2017;
originally announced February 2017.
-
Bose-Einstein Condensation of Long-Lifetime Polaritons in Thermal Equilibrium
Authors:
Yongbao Sun,
Patrick Wen,
Yoseob Yoon,
Gangqiang Liu,
Mark Steger,
Loren N. Pfeiffer,
Ken West,
David W. Snoke,
Keith A. Nelson
Abstract:
Exciton-polaritons in semiconductor microcavities have been used to demonstrate quantum effects such as Bose-Einstein condensation, superfluity, and quantized vortices. However, in these experiments, the polaritons have not reached thermal equilibrium when they undergo the transition to a coherent state. This has prevented the verification of one of the canonical predictions for condensation, name…
▽ More
Exciton-polaritons in semiconductor microcavities have been used to demonstrate quantum effects such as Bose-Einstein condensation, superfluity, and quantized vortices. However, in these experiments, the polaritons have not reached thermal equilibrium when they undergo the transition to a coherent state. This has prevented the verification of one of the canonical predictions for condensation, namely the phase diagram. In this work, we have created a polariton gas in a semiconductor microcavity in which the quasiparticles have a lifetime much longer than their thermalization time. This allows them to reach thermal equilibrium in a laser-generated confining trap. Their energy distributions are well fit by equilibrium Bose-Einstein distributions over a broad range of densities and temperatures from very low densities all the way up to the threshold for Bose-Einstein condensation. The good fits of the Bose-Einstein distribution over a broad range of density and temperature imply that the particles obey the predicted power law for the phase boundary of Bose-Einstein condensation.
△ Less
Submitted 4 December, 2016; v1 submitted 11 January, 2016;
originally announced January 2016.
-
Measurements of Baryon Pair Decays of $χ_{cJ}$ Mesons
Authors:
M. Ablikim,
M. N. Achasov,
O. Albayrak,
D. J. Ambrose,
F. F. An,
Q. An,
J. Z. Bai,
Y. Ban,
J. Becker,
J. V. Bennett,
M. Bertani,
J. M. Bian,
E. Boger,
O. Bondarenko,
I. Boyko,
R. A. Briere,
V. Bytev,
X. Cai,
O. Cakir,
A. Calcaterra,
G. F. Cao,
S. A. Cetin,
J. F. Chang,
G. Chelkov,
G. Chen
, et al. (326 additional authors not shown)
Abstract:
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$,…
▽ More
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$, $(20.8 \pm 1.6 \pm 2.3)\times 10^{-5}$; $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{0}\barΣ^{0})$ = $(47.8 \pm 3.4 \pm 3.9)\times 10^{-5}$, $(3.8 \pm 1.0 \pm 0.5)\times 10^{-5}$, $(4.0 \pm 1.1 \pm 0.5) \times 10^{-5}$; and $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{+}\barΣ^{-})$ = $(45.4 \pm 4.2 \pm 3.0)\times 10^{-5}$, $(5.4 \pm 1.5 \pm 0.5)\times 10^{-5}$, $(4.9 \pm 1.9 \pm 0.7)\times 10^{-5}$, where the first error is statistical and the second is systematic. Upper limits on the branching fractions for the decays of $χ_{c1,2}\rightarrowΣ^{0}\barΣ^{0}$, $Σ^{+}\barΣ^{-}$, are estimated to be $\cal{B}$$(χ_{c1}\rightarrowΣ^{0}\barΣ^{0}) < 6.2\times 10^{-5}$, $\cal{B}$$(χ_{c2}\rightarrowΣ^{0}\barΣ^{0}) < 6.5\times 10^{-5}$, $\cal{B}$$(χ_{c1}\rightarrowΣ^{+}\barΣ^{-}) < 8.7\times 10^{-5}$ and $\cal{B}$$(χ_{c2}\rightarrowΣ^{+}\barΣ^{-}) < 8.8\times 10^{-5}$ at the 90% confidence level.
△ Less
Submitted 4 March, 2013; v1 submitted 9 November, 2012;
originally announced November 2012.
-
The Excess Heat Capacity in Glass-forming Liquid Systems Containing Molecules
Authors:
H. B. Ke,
P. Wen,
W. H. Wang
Abstract:
The excess heat capacity at glass transition temperature in two types of glass-forming systems of [xNaNO3\cdot(1-x)KNO3]60[Ca(NO3)2]40 (0 \leq x \leq 1) and Ca(NO3)2\cdotyH2O (4 \leq y \leq 13) is studied. In the former system, with the replacement of K+ cation with Na+ cation, the excess heat capacity is almost invariable around 65.1 J\cdotmol-1\cdotK-1, while the excess increases by 38.9 J\cdotm…
▽ More
The excess heat capacity at glass transition temperature in two types of glass-forming systems of [xNaNO3\cdot(1-x)KNO3]60[Ca(NO3)2]40 (0 \leq x \leq 1) and Ca(NO3)2\cdotyH2O (4 \leq y \leq 13) is studied. In the former system, with the replacement of K+ cation with Na+ cation, the excess heat capacity is almost invariable around 65.1 J\cdotmol-1\cdotK-1, while the excess increases by 38.9 J\cdotmol-1\cdotK-1 with the increasing per molar H2O content in latter system. A quantitative description of the excess heat capacity is built up with the consideration of atomic and molecular translational motion in the glass-forming systems. This finding might offer further understanding to the glass transition.
△ Less
Submitted 21 November, 2011;
originally announced November 2011.
-
The correlation between molecular motions and heat capacity in normal ice and water
Authors:
Hai Bo Ke,
Ping Wen,
Wei Hua Wang
Abstract:
The heat capacities of ice and water at ambient pressure are reexamined to build an intrinsic correlation between H2O molecular motions and the heat capacity. Based on the evolution of H2O molecular motions, a satisfactory description of the heat capacity of ice and water is provided. The heat capacity of ice is related not only to H2O molecular vibrations, but also to the molecular rotations. In…
▽ More
The heat capacities of ice and water at ambient pressure are reexamined to build an intrinsic correlation between H2O molecular motions and the heat capacity. Based on the evolution of H2O molecular motions, a satisfactory description of the heat capacity of ice and water is provided. The heat capacity of ice is related not only to H2O molecular vibrations, but also to the molecular rotations. In water, all H2O molecular vibrations, rotations and translations contribute to the heat capacity. The molecular translational motions are found to be the main contribution to the large heat capacity of water. The results provide a deep insight into the nature of water and ice at ambient pressure.
△ Less
Submitted 20 November, 2011;
originally announced November 2011.
