Showing 1–50 of 62 results for author: Wen, H

Optical frequency division referenced to microhertz-linewidth quantum-noise-limited lasers

Authors: Jiahao Hu, Yanlan Xiao, Honglei Yang, Siyi Xue, Wenchan Dong, Kunpeng Zhai, Sha Zhu, Kun Qiu, Shengkang Zhang, Jun Ge, Ninghua Zhu, Xiaoshun Jiang, Jing Xu, Huashun Wen, Heng Zhou

Abstract: Optical frequency division (OFD) implements the conversion of ultra-stable optical frequencies into microwave frequencies through an optical frequency comb flywheel, generating microwave oscillators with record-low phase noise and time jitter. However, conventional OFD systems face significant trade-off between division complexity and noise suppression due to severe thermal noise and technical noi… ▽ More Optical frequency division (OFD) implements the conversion of ultra-stable optical frequencies into microwave frequencies through an optical frequency comb flywheel, generating microwave oscillators with record-low phase noise and time jitter. However, conventional OFD systems face significant trade-off between division complexity and noise suppression due to severe thermal noise and technical noise in the optical frequency references. Here, we address this challenge by generating common-cavity bi-color Brillouin lasers as the optical frequency references, which operate at the fundamental quantum noise limit with Schawlow-Townes linewidth on the 10 μHz level. Enabled by these ultra-coherent reference lasers, our OFD system uses a dramatically simplified comb divider with an unprecedented small division factor of 10, and successfully generates 10 GHz microwave signal with exceptional phase noise of -65 dBc/Hz at 1Hz, -151 dBc/Hz at 10 kHz, and -170 dBc/Hz at 10 MHz offset. Our work redefines the trade-off between noise suppression and division complexity in OFD, paving the way for compact, high-performance microwave synthesis for next-generation atomic clocks, quantum sensors, and low-noise radar systems. △ Less

Submitted 30 May, 2025; originally announced May 2025.

Comments: 18 pages, 5 figures

Ultrafast excitation of polar skyrons

Authors: Huaiyu Wang, Vladimir Stoica, Cheng Dai, Marek Paściak, Sujit Das, Tiannan Yang, Mauro A. P. Gonçalves, Jiri Kulda, Margaret R. McCarter, Anudeep Mangu, Yue Cao, Hari Padma, Utkarsh Saha, Diling Zhu, Takahiro Sato, Sanghoon Song, Mathias Hoffmann, Patrick Kramer, Silke Nelson, Yanwen Sun, Quynh Nguyen, Zhan Zhang, Ramamoorthy Ramesh, Lane Martin, Aaron M. Lindenberg , et al. (5 additional authors not shown)

Abstract: Unraveling collective modes arising from coupled degrees of freedom is crucial for understanding complex interactions in solids and developing new functionalities. Unique collective behaviors emerge when two degrees of freedom, ordered on distinct length scales, interact. Polar skyrmions, three-dimensional electric polarization textures in ferroelectric superlattices, disrupt the lattice continuit… ▽ More Unraveling collective modes arising from coupled degrees of freedom is crucial for understanding complex interactions in solids and developing new functionalities. Unique collective behaviors emerge when two degrees of freedom, ordered on distinct length scales, interact. Polar skyrmions, three-dimensional electric polarization textures in ferroelectric superlattices, disrupt the lattice continuity at the nanometer scale with nontrivial topology, leading to previously unexplored collective modes. Here, using terahertz-field excitation and femtosecond x-ray diffraction, we discovered subterahertz collective modes, dubbed 'skyrons', which appear as swirling patterns of atomic displacements functioning as atomic-scale gearsets. Momentum-resolved time-domain measurements of diffuse scattering revealed an avoided crossing in the dispersion relation of skyrons. We further demonstrated that the amplitude and dispersion of skyrons can be controlled by sample temperature and electric-field bias. Atomistic simulations and dynamical phase-field modeling provided microscopic insights into the three-dimensional crystallographic and polarization dynamics. The discovery of skyrons and their coupling with terahertz fields opens avenues for ultrafast control of topological polar structures. △ Less

Submitted 19 June, 2025; v1 submitted 15 May, 2025; originally announced May 2025.

Supporting renewable energy planning and operation with data-driven high-resolution ensemble weather forecast

Authors: Jingnan Wang, Jie Chao, Shangshang Yang, Kaijun Ren, Kefeng Deng, Xi Chen, Yaxin Liu, Hanqiuzi Wen, Ziniu Xiao, Lifeng Zhang, Xiaodong Wang, Jiping Guan, Baoxiang Pan

Abstract: The planning and operation of renewable energy, especially wind power, depend crucially on accurate, timely, and high-resolution weather information. Coarse-grid global numerical weather forecasts are typically downscaled to meet these requirements, introducing challenges of scale inconsistency, process representation error, computation cost, and entanglement of distinct uncertainty sources from c… ▽ More The planning and operation of renewable energy, especially wind power, depend crucially on accurate, timely, and high-resolution weather information. Coarse-grid global numerical weather forecasts are typically downscaled to meet these requirements, introducing challenges of scale inconsistency, process representation error, computation cost, and entanglement of distinct uncertainty sources from chaoticity, model bias, and large-scale forcing. We address these challenges by learning the climatological distribution of a target wind farm using its high-resolution numerical weather simulations. An optimal combination of this learned high-resolution climatological prior with coarse-grid large scale forecasts yields highly accurate, fine-grained, full-variable, large ensemble of weather pattern forecasts. Using observed meteorological records and wind turbine power outputs as references, the proposed methodology verifies advantageously compared to existing numerical/statistical forecasting-downscaling pipelines, regarding either deterministic/probabilistic skills or economic gains. Moreover, a 100-member, 10-day forecast with spatial resolution of 1 km and output frequency of 15 min takes < 1 hour on a moderate-end GPU, as contrast to $\mathcal{O}(10^3)$ CPU hours for conventional numerical simulation. By drastically reducing computational costs while maintaining accuracy, our method paves the way for more efficient and reliable renewable energy planning and operation. △ Less

Submitted 27 June, 2025; v1 submitted 7 May, 2025; originally announced May 2025.

Collisionless ion-electron energy exchange in magnetized shocks

Authors: Y. Zhang, P. V. Heuer, H. Wen, J. R. Davies, C. Ren, D. B. Schaeffer, E. G. Blackman, J. Zhang, A. Bret, F. García-Rubio

Abstract: Energy partition between ions and electrons in collisionless shocks has long been an unsolved fundamental physical problem. We show that kinetic simulations of moderate Alfvénic Mach number, magnetized, collisionless shocks reveal rapid, faster-than-Coulomb, energy exchange between ions and electrons when the plasma is sufficiently magnetized. Using kinetic and multi-fluid models with counter-stre… ▽ More Energy partition between ions and electrons in collisionless shocks has long been an unsolved fundamental physical problem. We show that kinetic simulations of moderate Alfvénic Mach number, magnetized, collisionless shocks reveal rapid, faster-than-Coulomb, energy exchange between ions and electrons when the plasma is sufficiently magnetized. Using kinetic and multi-fluid models with counter-streaming ions, we identify resonances between electron whistler and ion magnetohydrodynamic waves that account for this rapid energy exchange. △ Less

Submitted 24 April, 2025; originally announced April 2025.

Comments: In review

Pulmonary electrical impedance tomography based on deep recurrent neural networks

Authors: Zhenzhong Song, Jianping Li, Jun Zhang, Hanyun Wen, Suqin Zhang, Wei Jiang, Xingxing Zhou

Abstract: Electrical impedance tomography (EIT) is a non-invasive functional imaging technology. In order to enhance the quality of lung EIT images, novel algorithms, namely LSTM-LSTM, LSTM-BiLSTM, BiLSTM-LSTM, and BiLSTM-BiLSTM, leveraging LSTM or BiLSTM networks, were developed. Simulation results demonstrate that the optimized deep recurrent neural network significantly enhanced the quality of the recons… ▽ More Electrical impedance tomography (EIT) is a non-invasive functional imaging technology. In order to enhance the quality of lung EIT images, novel algorithms, namely LSTM-LSTM, LSTM-BiLSTM, BiLSTM-LSTM, and BiLSTM-BiLSTM, leveraging LSTM or BiLSTM networks, were developed. Simulation results demonstrate that the optimized deep recurrent neural network significantly enhanced the quality of the reconstructed images. Specifically, the correlation coefficients of the LSTM-LSTM and the LSTM-BiLSTM algorithms exhibited maximum increases of 27.5% and 25.4% over the LSTM algorithm, respectively. Moreover, in comparison to the BiLSTM algorithm, the correlation coefficients of the BiLSTM-LSTM and BiLSTM-BiLSTM algorithms increased by 11.7% and 13.4%, respectively. Overall, the quality of EIT images showed notable enhancement. This research offers a valuable approach for enhancing EIT image quality and presents a novel application of LSTM networks in EIT technology. △ Less

Submitted 20 April, 2025; originally announced April 2025.

JANC: A cost-effective, differentiable compressible reacting flow solver featured with JAX-based adaptive mesh refinement

Authors: Haocheng Wen, Faxuan Luo, Sheng Xu, Bing Wang

Abstract: The compressible reacting flow numerical solver is an essential tool in the study of combustion, energy disciplines, as well as in the design of industrial power and propulsion devices. We have established the first JAX-based block-structured adaptive mesh refinement (AMR) framework, called JAX-AMR, and then developed a fully-differentiable solver for compressible reacting flows, named JANC. JANC… ▽ More The compressible reacting flow numerical solver is an essential tool in the study of combustion, energy disciplines, as well as in the design of industrial power and propulsion devices. We have established the first JAX-based block-structured adaptive mesh refinement (AMR) framework, called JAX-AMR, and then developed a fully-differentiable solver for compressible reacting flows, named JANC. JANC is implemented in Python and features automatic differentiation capabilities, enabling an efficient integration of the solver with machine learning. Furthermore, benefited by multiple acceleration features such as XLA-powered JIT compilation, GPU/TPU computing, parallel computing, and AMR, the computational efficiency of JANC has been significantly improved. In a comparative test of a two-dimensional detonation tube case, the computational cost of the JANC core solver, running on a single A100 GPU, was reduced to 1% of that of OpenFOAM, which was parallelized across 384 CPU cores. When the AMR method is enabled for both solvers, JANC's computational cost can be reduced to 1-2% of that of OpenFOAM. The core solver of JANC has also been tested for parallel computation on a 4-card A100 setup, demonstrating its convenient and efficient parallel computing capability. JANC also shows strong compatibility with machine learning by combining adjoint optimization to make the whole dynamic trajectory efficiently differentiable. JANC provides a new generation of high-performance, cost-effective, and high-precision solver framework for large-scale numerical simulations of compressible reacting flows and related machine learning research. Now, the source codes have been available under the MIT license at https://github.com/JA4S/JAX-AMR and https://github.com/JA4S/JANC. △ Less

Submitted 18 April, 2025; originally announced April 2025.

Cystic Lung Phantom to Validate Clinical CT Protocols

Authors: Shefra Shah, Farah Hussaini, Dumitru Mazilu, Eric E. Bennett, Han Wen

Abstract: In CT-based evaluation of the extent of cystic changes in the lungs of patients with cystic lung diseases, such as Lymphangioleiomyomatosis (LAM), there is a lack of a lung phantom containing air-filled cavities that mimic pulmonary cysts to calibrate the measurement of cystic volumes from CT scans. Here we describe a simple, easy-to-replicate cystic lung phantom consisting of basic structures of… ▽ More In CT-based evaluation of the extent of cystic changes in the lungs of patients with cystic lung diseases, such as Lymphangioleiomyomatosis (LAM), there is a lack of a lung phantom containing air-filled cavities that mimic pulmonary cysts to calibrate the measurement of cystic volumes from CT scans. Here we describe a simple, easy-to-replicate cystic lung phantom consisting of basic structures of a trachea and two lung compartments. The lung compartments contain air cavities of varying sizes to mimic cystic lesions. The lung volumes are equal to those of typical adults. The lung compartments are made of a foam material recommended by NIST to simulate the radiodensity of human lung parenchyma. In tests performed on a clinical scanner using two types of lung analysis software, the various structures in the lung phantom were correctly recognized by the software. The re-sulting cystic volume measurements revealed the relationship between the size of the cysts and the accuracy of the measurement. A significant finding is that the volumes of individual cysts were underestimated for small cysts. The error increased with decreasing cyst sizes. Such underestimation has not been mentioned previously and de-serves the attention of clinicians using CT scans to assess the cyst burden in the lungs, particularly in patients presenting with numerous small pulmonary cysts. △ Less

Submitted 25 March, 2025; originally announced March 2025.

Physics-informed Shadowgraph Network: An End-to-end Density Field Reconstruction Method

Authors: Xutun Wang, Yuchen Zhang, Zidong Li, Haocheng Wen, Bing Wang

Abstract: This study presents a novel approach for quantificationally reconstructing density fields from shadowgraph images using physics-informed neural networks This study presents a novel approach for quantificationally reconstructing density fields from shadowgraph images using physics-informed neural networks △ Less

Submitted 2 November, 2024; v1 submitted 26 October, 2024; originally announced October 2024.

Pump depletion and the Raman gap in ignition-scale plasmas

Authors: S. H. Cao, M. J. Rosenberg, A. A. Solodov, H. Wen, C. Ren

Abstract: Laser-plasma instabilities under ignition conditions for direct-drive inertial confinement fusion are studied using two-dimensional Particle-in-Cell simulations with a combination of in-plane (PP) and out-of-the-plane (SP) lasers. The results show that stimulated Raman side scattering can induce significant pump depletion and form a gap in the Raman scattered light spectra that have been observed… ▽ More Laser-plasma instabilities under ignition conditions for direct-drive inertial confinement fusion are studied using two-dimensional Particle-in-Cell simulations with a combination of in-plane (PP) and out-of-the-plane (SP) lasers. The results show that stimulated Raman side scattering can induce significant pump depletion and form a gap in the Raman scattered light spectra that have been observed in experiments. △ Less

Submitted 8 September, 2024; originally announced September 2024.

Comments: 6 pages, 4 figures

Nanophotonic waveguide chip-to-free-space beam scanning at 68 Million Spots/(s$\cdot$mm$^{2}$)

Authors: Matt Saha, Y. Henry Wen, Andrew S. Greenspon, Matthew Zimmermann, Kevin J. Palm, Alex Witte, Yin Min Goh, Chao Li, Mark Dong, Andrew J. Leenheer, Genevieve Clark, Gerald Gilbert, Matt Eichenfield, Dirk Englund

Abstract: A seamless chip-to-world photonic interface enables wide-ranging advancements in optical ranging, display, communication, computation, imaging, and light-matter interaction. An optimal solution allows for 2D scanning of a diffraction-limited beam from anywhere on a photonic chip over a large number of beam-spots in free-space. Currently, devices with direct PIC integration rely on tiled apertures… ▽ More A seamless chip-to-world photonic interface enables wide-ranging advancements in optical ranging, display, communication, computation, imaging, and light-matter interaction. An optimal solution allows for 2D scanning of a diffraction-limited beam from anywhere on a photonic chip over a large number of beam-spots in free-space. Currently, devices with direct PIC integration rely on tiled apertures with poor mode qualities, large footprints, and complex control systems. Micro-mechanical beam scanners have good beam quality but lack direct PIC integration and are inertially-limited due to the use of bulk optical components or structures in which the optical aperture and actuator sizes are inextricably linked, resulting in trade-offs among resolution, speed, and footprint. Here, we overcome these limitations with the photonic "ski-jump": a nanoscale optical waveguide monolithically integrated atop a piezoelectrically actuated cantilever which passively curls ~90$^{\circ}$ out-of-plane in a footprint of <0.1 mm$^{2}$, emits sub-micron diffraction-limited optical modes, and exhibits kHz-rate mechanical resonances with quality factors exceeding 10,000. This enables two-dimensional beam-scanning with footprint-adjusted spot-rates of 68.6 mega-spots/(s$\cdot$mm$^{2}$) at CMOS-level voltages, which is equivalent to a 1 megapixel display at 100 Hz from a 1.5 mm$^{2}$ footprint, and exceeds the performance of state-of-the-art MEMS mirrors by >50$\times$. Using this device, we demonstrate image projection, video projection, and the initialization and readout of single photons from silicon vacancy centers in diamond waveguides. Based on current performance, we identify pathways for achieving >1 giga-spots at kHz-rates in a ~1 cm$^{2}$ area to provide a seamless, scalable optical pipeline between integrated photonic processors and the free-space world. △ Less

Submitted 1 May, 2025; v1 submitted 25 June, 2024; originally announced June 2024.

Comments: 12 pages main text, 1 page methods, 10 pages supplementary information

Optical Control of Adaptive Nanoscale Domain Networks

Authors: Marc Zajac, Tao Zhou, Tiannan Yang, Sujit Das, Yue Cao, Burak Guzelturk, Vladimir Stoica, Mathew Cherukara, John W. Freeland, Venkatraman Gopalan, Ramamoorthy Ramesh, Lane W. Martin, Long-Qing Chen, Martin Holt, Stephan Hruszkewycz, Haidan Wen

Abstract: Adaptive networks can sense and adjust to dynamic environments to optimize their performance. Understanding their nanoscale responses to external stimuli is essential for applications in nanodevices and neuromorphic computing. However, it is challenging to image such responses on the nanoscale with crystallographic sensitivity. Here, the evolution of nanodomain networks in (PbTiO3)n/(SrTiO3)n supe… ▽ More Adaptive networks can sense and adjust to dynamic environments to optimize their performance. Understanding their nanoscale responses to external stimuli is essential for applications in nanodevices and neuromorphic computing. However, it is challenging to image such responses on the nanoscale with crystallographic sensitivity. Here, the evolution of nanodomain networks in (PbTiO3)n/(SrTiO3)n superlattices was directly visualized in real space as the system adapts to ultrafast repetitive optical excitations that emulate controlled neural inputs. The adaptive response allows the system to explore a wealth of metastable states that were previously inaccessible. Their reconfiguration and competition were quantitatively measured by scanning x-ray nanodiffraction as a function of the number of applied pulses, in which crystallographic characteristics were quantitatively assessed by assorted diffraction patterns using unsupervised machine-learning methods. The corresponding domain boundaries and their connectivity were drastically altered by light, holding promise for light-programmable nanocircuits in analogy to neuroplasticity. Phase-field simulations elucidate that the reconfiguration of the domain networks is a result of the interplay between photocarriers and transient lattice temperature. The demonstrated optical control scheme and the uncovered nanoscopic insights open opportunities for remote control of adaptive nanoscale domain networks. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Fast and accurate extraction of ultra-high quality factor from cavity ring-down measurement

Authors: Yanping Yang, Shihan Liu, Yong Geng, Huashun Wen, Heng Zhou

Abstract: Cavity ring-down is an essential test to measure ultra-high quality factor (UHQ) optical cavities, which is, however, frequently misinterpreted due to lacking of a specified analysis guideline. Here we clarify the basic property of cavity ring down and present a step-by-step method that enables extraction of the overall quality factor, as well as the intrinsic loss and coupling state of UHQ caviti… ▽ More Cavity ring-down is an essential test to measure ultra-high quality factor (UHQ) optical cavities, which is, however, frequently misinterpreted due to lacking of a specified analysis guideline. Here we clarify the basic property of cavity ring down and present a step-by-step method that enables extraction of the overall quality factor, as well as the intrinsic loss and coupling state of UHQ cavities with better fidelity and simplicity than prior schemes. Our work can facilitate acurrate design and characterization of UHQ cavities for ultra-low noise lasers, high finesse reference cavities, and ultra-narrow optical filters. △ Less

Submitted 21 May, 2024; originally announced June 2024.

Hidden correlations in stochastic photoinduced dynamics of a solid-state electrolyte

Authors: Jackson McClellan, Alfred Zong, Kim H. Pham, Hanzhe Liu, Zachery W. B. Iton, Burak Guzelturk, Donald A. Walko, Haidan Wen, Scott K. Cushing, Michael W. Zuerch

Abstract: Photoexcitation by ultrashort laser pulses plays a crucial role in controlling reaction pathways, creating nonequilibrium material properties, and offering a microscopic view of complex dynamics at the molecular level. The photo response following a laser pulse is, in general, non-identical between multiple exposures due to spatiotemporal fluctuations in a material or the stochastic nature of dyna… ▽ More Photoexcitation by ultrashort laser pulses plays a crucial role in controlling reaction pathways, creating nonequilibrium material properties, and offering a microscopic view of complex dynamics at the molecular level. The photo response following a laser pulse is, in general, non-identical between multiple exposures due to spatiotemporal fluctuations in a material or the stochastic nature of dynamical pathways. However, most ultrafast experiments using a stroboscopic pump-probe scheme struggle to distinguish intrinsic sample fluctuations from extrinsic apparatus noise, often missing seemingly random deviations from the averaged shot-to-shot response. Leveraging the stability and high photon-flux of time-resolved X-ray micro-diffraction at a synchrotron, we developed a method to quantitatively characterize the shot-to-shot variation of the photoinduced dynamics in a solid-state electrolyte. By analyzing temporal evolutions of the lattice parameter of a single grain in a powder ensemble, we found that the sample responses after different shots contain random fluctuations that are, however, not independent. Instead, there is a correlation between the nonequilibrium lattice trajectories following adjacent laser shots with a characteristic "correlation length" of approximately 1,500 shots, which represents an energy barrier of 0.38~eV for switching the photoinduced pathway, a value interestingly commensurate with the activation energy of lithium ion diffusion. Not only does our nonequilibrium noise correlation spectroscopy provide a new strategy for studying fluctuations that are central to phase transitions in both condensed matter and molecular systems, it also paves the way for discovering hidden correlations and novel metastable states buried in oft-presumed random, uncorrelated fluctuating dynamics. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Research and experimental verification on low-frequency long-range underwater sound propagation dispersion characteristics under dual-channel sound speed profiles in the Chukchi Plateau

Authors: Jinbao Weng, Yubo Qi, Yanming Yang, Hongtao Wen, Hongtao Zhou, Ruichao Xue

Abstract: The dual-channel sound speed profiles of the Chukchi Plateau and the Canadian Basin have become current research hotspots due to their excellent low-frequency sound signal propagation ability. Previous research has mainly focused on using sound propagation theory to explain the changes in sound signal energy. This article is mainly based on the theory of normal modes to study the fine structure of… ▽ More The dual-channel sound speed profiles of the Chukchi Plateau and the Canadian Basin have become current research hotspots due to their excellent low-frequency sound signal propagation ability. Previous research has mainly focused on using sound propagation theory to explain the changes in sound signal energy. This article is mainly based on the theory of normal modes to study the fine structure of low-frequency wide-band sound propagation dispersion under dual-channel sound speed profiles. In this paper, the problem of the intersection of normal mode dispersion curves caused by the dual-channel sound speed profile (SSP) has been explained, the blocking effect of seabed terrain changes on dispersion structures has been analyzed, and the normal modes has been separated by using modified warping operator. The above research results have been verified through a long-range seismic exploration experiment at the Chukchi Plateau. At the same time, based on the acoustic signal characteristics in this environment, two methods for estimating the distance of sound sources have been proposed, and the experiment data at sea has also verified these two methods. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 30 pages, 18 figures

Research and experimental verification on low-frequency long-range sound propagation characteristics under ice-covered and range-dependent marine environment in the Arctic

Authors: Jinbao Weng, Yubo Qi, Yanming Yang, Hongtao Wen, Hongtao Zhou, Ruichao Xue

Abstract: At present, research on sound propagation under the Arctic ice mainly focuses on modeling and experimental verification of sound propagation under sea ice cover and unique sound velocity profiles. Among them, the main research object of concern is sound transmission loss, and this article will delve into the time-domain waveform and fine dispersion structure of low-frequency broadband acoustic sig… ▽ More At present, research on sound propagation under the Arctic ice mainly focuses on modeling and experimental verification of sound propagation under sea ice cover and unique sound velocity profiles. Among them, the main research object of concern is sound transmission loss, and this article will delve into the time-domain waveform and fine dispersion structure of low-frequency broadband acoustic signals. Firstly, based on the theory of normal modes, this article derives the horizontal wavenumber expression and warping transformation operator for refractive normal modes in the Arctic deep-sea environment. Subsequently, based on measured ocean environmental parameters and sound field simulation calculations, this article studied the general laws of low-frequency long-range sound propagation signals in the Arctic deep-sea environment, and elucidated the impact mechanism of environmental factors such as seabed terrain changes, horizontal changes in sound velocity profiles (SSPs), and sea ice cover on low-frequency long-range sound propagation in the Arctic. This article validates the above research viewpoint through a sound propagation experiment conducted in the Arctic with a propagation distance exceeding 1000km. The marine environment of this experiment has obvious horizontal variation characteristics. At the same time, this article takes the lead in utilizing the warping transformation of refractive normal waves in the Arctic waters to achieve single hydrophone based separation of normal waves and extraction of dispersion structures, which is conducive to future research on underwater sound source localization and environmental parameter inversion based on dispersion structures. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 46 pages, 35 figures

Primary Investigation on Ram-Rotor Detonation Engine

Authors: Haocheng Wen, Bing Wang

Abstract: The study presents a new type of detonation engine called the Ram-Rotor Detonation Engine (RRDE), which overcomes some of the drawbacks of conventional detonation engines such as pulsed detonation engines, oblique detonation engines, and rotating detonation engines. The RRDE organizes the processes of reactant compression, detonation combustion, and burned gas expansion in a single rotor, allowing… ▽ More The study presents a new type of detonation engine called the Ram-Rotor Detonation Engine (RRDE), which overcomes some of the drawbacks of conventional detonation engines such as pulsed detonation engines, oblique detonation engines, and rotating detonation engines. The RRDE organizes the processes of reactant compression, detonation combustion, and burned gas expansion in a single rotor, allowing it to achieve an ideal detonation cycle under a wide range of inlet Mach numbers, thus significantly improving the total pressure gain of the propulsion system. The feasibility and performance of RRDE are discussed through theoretical analysis and numerical simulations. The theoretical analysis indicates that the performance of the RRDE is mainly related to the inlet velocity, the rotor rim velocity and the equivalence ratio of reactant. Increasing the inlet velocity leads to a decrease in the total pressure gain of the RRDE. Once the inlet velocity exceeds the critical value, the engine cannot achieve positive total pressure gain. Increasing the rim velocity can improve the total pressure gain and the thermodynamic cycle efficiency of RRDE. Increasing the equivalence ratio can also improve the thermodynamic cycle efficiency and enhance the total pressure gain at lower inlet velocities. While, at higher inlet velocities, increasing the equivalence ratio may reduce the total pressure gain. Numerical simulations are also performed to analyze the detailed flow field structure in RRDE and its variations with the inlet parameters. The simulation results demonstrate that the detonation wave can stably stand in the RRDE and can adapt to the change of the inlet equivalence ratio within a certain range. This study provides preliminary theoretical basis and design reference for the RRDE. △ Less

Submitted 2 November, 2023; originally announced November 2023.

High-speed photonic crystal modulator with non-volatile memory via structurally-engineered strain concentration in a piezo-MEMS platform

Authors: Y. Henry Wen, David Heim, Matthew Zimmermann, Roman A. Shugayev, Mark Dong, Andrew J. Leenheer, Gerald Gilbert, Matt Eichenfield, Mikkel Heuck, Dirk R. Englund

Abstract: Numerous applications in quantum and classical optics require scalable, high-speed modulators that cover visible-NIR wavelengths with low footprint, drive voltage (V) and power dissipation. A critical figure of merit for electro-optic (EO) modulators is the transmission change per voltage, dT/dV. Conventional approaches in wave-guided modulators seek to maximize dT/dV by the selection of a high EO… ▽ More Numerous applications in quantum and classical optics require scalable, high-speed modulators that cover visible-NIR wavelengths with low footprint, drive voltage (V) and power dissipation. A critical figure of merit for electro-optic (EO) modulators is the transmission change per voltage, dT/dV. Conventional approaches in wave-guided modulators seek to maximize dT/dV by the selection of a high EO coefficient or a longer light-material interaction, but are ultimately limited by nonlinear material properties and material losses, respectively. Optical and RF resonances can improve dT/dV, but introduce added challenges in terms of speed and spectral tuning, especially for high-Q photonic cavity resonances. Here, we introduce a cavity-based EO modulator to solve both trade-offs in a piezo-strained photonic crystal cavity. Our approach concentrates the displacement of a piezo-electric actuator of length L and a given piezoelectric coefficient into the PhCC, resulting in dT/dV proportional to L under fixed material loss. Secondly, we employ a material deformation that is programmable under a "read-write" protocol with a continuous, repeatable tuning range of 5 GHz and a maximum non-volatile excursion of 8 GHz. In telecom-band demonstrations, we measure a fundamental mode linewidth = 5.4 GHz, with voltage response 177 MHz/V corresponding to 40 GHz for voltage spanning -120 to 120 V, 3dB-modulation bandwidth of 3.2 MHz broadband DC-AC, and 142 MHz for resonant operation near 2.8 GHz operation, optical extinction down to min(log(T)) = -25 dB via Michelson-type interference, and an energy consumption down to 0.17 nW/GHz. The strain-enhancement methods presented here are applicable to study and control other strain-sensitive systems. △ Less

Submitted 13 October, 2023; v1 submitted 11 October, 2023; originally announced October 2023.

Infrared Nanoimaging of Hydrogenated Perovskite Nickelate Synaptic Devices

Authors: Sampath Gamage, Sukriti Manna, Marc Zajac, Steven Hancock, Qi Wang, Sarabpreet Singh, Mahdi Ghafariasl, Kun Yao, Tom Tiwald, Tae Joon Park, David P. Landau, Haidan Wen, Subramanian Sankaranarayanan, Pierre Darancet, Shriram Ramanathan, Yohannes Abate

Abstract: Solid-state devices made from correlated oxides such as perovskite nickelates are promising for neuromorphic computing by mimicking biological synaptic function. However, comprehending dopant action at the nanoscale poses a formidable challenge to understanding the elementary mechanisms involved. Here, we perform operando infrared nanoimaging of hydrogen-doped correlated perovskite, neodymium nick… ▽ More Solid-state devices made from correlated oxides such as perovskite nickelates are promising for neuromorphic computing by mimicking biological synaptic function. However, comprehending dopant action at the nanoscale poses a formidable challenge to understanding the elementary mechanisms involved. Here, we perform operando infrared nanoimaging of hydrogen-doped correlated perovskite, neodymium nickel oxide (H-NdNiO3) devices and reveal how an applied field perturbs dopant distribution at the nanoscale. This perturbation leads to stripe phases of varying conductivity perpendicular to the applied field, which define the macroscale electrical characteristics of the devices. Hyperspectral nano-FTIR imaging in conjunction with density functional theory calculations unveil a real-space map of multiple vibrational states of H-NNO associated with OH stretching modes and their dependence on the dopant concentration. Moreover, the localization of excess charges induces an out-of-plane lattice expansion in NNO which was confirmed by in-situ - x-ray diffraction and creates a strain that acts as a barrier against further diffusion. Our results and the techniques presented here hold great potential to the rapidly growing field of memristors and neuromorphic devices wherein nanoscale ion motion is fundamentally responsible for function. △ Less

Submitted 29 August, 2023; originally announced September 2023.

Comments: 30 pages, 5 figures in the main text and 5 figures in the Supplementary Material

Programmable access to microresonator solitons with modulational sideband heating

Authors: Huamin Zheng, Wei Sun, Xingxing Ding, Haoran Wen, Ruiyang Chen, Baoqi Shi, Yi-Han Luo, Jinbao Long, Chen Shen, Shan Meng, Hairun Guo, Junqiu Liu

Abstract: Dissipative Kerr solitons formed in high-$Q$ optical microresonators provide a route to miniaturized optical frequency combs that can revolutionize precision measurements, spectroscopy, sensing, and communication. In the last decade, a myriad of integrated material platforms have been extensively studied and developed to create photonic-chip-based soliton combs. However, the photo-thermal effect i… ▽ More Dissipative Kerr solitons formed in high-$Q$ optical microresonators provide a route to miniaturized optical frequency combs that can revolutionize precision measurements, spectroscopy, sensing, and communication. In the last decade, a myriad of integrated material platforms have been extensively studied and developed to create photonic-chip-based soliton combs. However, the photo-thermal effect in integrated optical microresonators has been a major issue preventing simple and reliable soliton generation. Several sophisticated techniques to circumvent the photo-thermal effect have been developed. In addition, instead of the single-soliton state, emerging applications in microwave photonics and frequency metrology prefer multi-soliton states. Here we demonstrate an approach to manage the photo-thermal effect and facilitate soliton generation. The approach is based on a single phase-modulated pump, where the generated blue-detuned sideband synergizes with the carrier and thermally stabilizes the microresonator. We apply this technique and demonstrate deterministic soliton generation of 19.97 GHz repetition rate in an integrated silicon nitride microresonator. Furthermore, we develop a program to automatically address to target $N-$soliton state, in addition to the single-soliton state, with near 100% success rate and as short as 10 s time consumption. Our method is valuable for soliton generation in essentially any platforms even with strong photo-thermal effect, and can promote wider applications of soliton frequency comb systems for microwave photonics, telecommunication and frequency metrology. △ Less

Submitted 7 September, 2023; originally announced September 2023.

Journal ref: APL Photonics 8, 126110 (2023)

Significant improvement of the lower critical field in Y doped Nb: potential replacement of basic material for the radio-frequency superconducting cavity

Authors: Wei Xie, Yu-Hao Liu, Xinwei Fan, Hai-Hu Wen

Abstract: The research of high energy and nuclear physics requires high power accelerators, and the superconducting radio-frequency (SRF) cavity is regarded as their engine. Up to now, the widely used practical and effective material for making the SRF cavity is pure Nb. The key parameter that governs the efficiency and the accelerating field (E_acc) of a SRF cavity is the lower critical field Hc1. Here, we… ▽ More The research of high energy and nuclear physics requires high power accelerators, and the superconducting radio-frequency (SRF) cavity is regarded as their engine. Up to now, the widely used practical and effective material for making the SRF cavity is pure Nb. The key parameter that governs the efficiency and the accelerating field (E_acc) of a SRF cavity is the lower critical field Hc1. Here, we report a significant improvement of Hc1 for a new type of alloy, Nb_{1-x}Y_x fabricated by the arc melting technique. Experimental investigations with multiple tools including x-ray diffraction, scanning electron microscopy, resistivity and magnetization are carried out, showing that the samples have good quality and a 30%-60% enhancement of Hc1. First principle calculations indicate that this improvement is induced by the delicate tuning of a Lifshitz transition of a Nb derivative band near the Fermi energy, which increases the Ginzburg-Landau parameter and Hc1. Our results may trigger a replacement of the basic material and thus a potential revolution for manufacturing the SRF cavity. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Comments: 12 pages, 5 figures, 1 table

Journal ref: Supercond. Sci. Technol. 36 075012 (2023)

Comprehensive Analysis Method of Acquiring Wall Heat Fluxes in Rotating Detonation Combustors

Authors: Yingchen Shi, Yongbo Zhang, Haocheng Wen, Bing Wang

Abstract: Accurate perception of the combustor thermal environment is crucial for thermal protection design of a rotating detonation combustor (RDC). In this study, a comprehensive analysis method is established to calculate the non-uniform heat flux distribution of the RDC by utilizing the measured temperature distribution of the combustor outer wall obtained by the high-speed infrared thermal imager. Firs… ▽ More Accurate perception of the combustor thermal environment is crucial for thermal protection design of a rotating detonation combustor (RDC). In this study, a comprehensive analysis method is established to calculate the non-uniform heat flux distribution of the RDC by utilizing the measured temperature distribution of the combustor outer wall obtained by the high-speed infrared thermal imager. Firstly, in order to determine the inverse heat flux solving method, a physical model based on the geometric characteristics of the RDC is constructed and its thermal conductive process is simulated, given by different heat flux boundary conditions. Then the wall heat fluxes are inversely calculated by the Levenberg-Marquardt (L-M) method based on the above numerical data. Results show that the L-M method can obtain more accurate heat flux distribution even in the zones with large heat flux gradients, considering the axial heat conduction within the combustor outer wall caused by the non-uniform heat flux. Finally, the wall heat flux distribution is analyzed coupling the L-M method together with the experimental measurements in kerosene two-phase RDC. The analyses show that the highest temperature of combustor outer surface and the highest wall heat flux occurs within the region of 20mm from the combustor head, which corresponds to nearly 14% of the combustor length. With the increase of axial distance, the heat flux is rapidly reduced, and then the heat flux distribution is more uniform at the downstream region of the combustor. The heat flux peak and thermal heat rate are positively correlated with the combustor equivalence ratio in the range between 0.44 and 0.64. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Comments: 26 pages, 21 figures

Collective Vortical Motion and Vorticity Reversals of Self-Propelled Particles on Circularly Patterned Substrates

Authors: Haosheng Wen, Yu Zhu, Chenhui Peng, P. B. Sunil Kumar, Mohamed Laradji

Abstract: The collective behavior of self-propelled particles (SPPs) under the combined effects of a circularly patterned substrate and circular confinement is investigated through coarse-grained molecular dynamics simulations of polarized and disjoint ring polymers. The study is performed over a wide range of values of the SPPs packing fraction $\barφ$, motility force $F_D$, and area fraction of the patter… ▽ More The collective behavior of self-propelled particles (SPPs) under the combined effects of a circularly patterned substrate and circular confinement is investigated through coarse-grained molecular dynamics simulations of polarized and disjoint ring polymers. The study is performed over a wide range of values of the SPPs packing fraction $\barφ$, motility force $F_D$, and area fraction of the patterned region. At low packing fractions, the SPPs are excluded from the system's center and exhibit a vortical motion that is dominated by the substrate at intermediate values of $F_D$. This exclusion zone is due to the coupling between the driving force and torque induced by the substrate, which induces an outward spiral motion of the SPPs. For high values of $F_D$, the SPPs exclusion from the center is dominated by the confining boundary. At high values of $\barφ$, the substrate pattern leads to reversals in the vorticity, which become quasi-periodic with increasing $\barφ$. We also found that the substrate pattern is able to separate SPPs based on their motilities. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Online calibration of a linear micro tomosynthesis scanner

Authors: Piroz Bahar, David Nguyen, Muyang Wang, Dumitru Mazilu, Eric E. Bennett, Han Wen

Abstract: In a linear tomosynthesis scanner designed for imaging histologic samples of several centimeter size at 10 micrometer resolution, the mechanical instability of the scanning stage (+/-10 micrometers) exceeded the resolution of the image system, making it necessary to determine the trajectory of the stage for each scan to avoid blurring and artifacts in the images that would arise from the errors in… ▽ More In a linear tomosynthesis scanner designed for imaging histologic samples of several centimeter size at 10 micrometer resolution, the mechanical instability of the scanning stage (+/-10 micrometers) exceeded the resolution of the image system, making it necessary to determine the trajectory of the stage for each scan to avoid blurring and artifacts in the images that would arise from the errors in the geometric information used in 3D reconstruction. We present a method for online calibration by attaching a layer of randomly dispersed micro glass beads or calcium particles to the bottom of the sample stage. The marker layer was easy to produce and proven effective in the calibration procedure. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Comments: 20 pages, 6 figures

Online geometric calibration of a hybrid CT system for ultrahigh-resolution imaging

Authors: Dakota H. King, Eric E. Bennett, Dumitru Mazilu, Muyang Wang, Marcus Y. Chen, Han Wen

Abstract: A hybrid imaging system consisting of a standard CT scanner and a low-profile photon-counting detector insert in contact with the patient's body has been used to produce ultrahigh-resolution images in a limited volume in chest scans of patients. The detector insert is placed on the patient bed as needed and not attached. Thus, its position and orientation in the scanner is dependent on the patient… ▽ More A hybrid imaging system consisting of a standard CT scanner and a low-profile photon-counting detector insert in contact with the patient's body has been used to produce ultrahigh-resolution images in a limited volume in chest scans of patients. The detector insert is placed on the patient bed as needed and not attached. Thus, its position and orientation in the scanner is dependent on the patient's position and scan settings. To allow accurate image reconstruction, we devised a method of determining the relative geometry of the detector insert and the CT scanner for each scan using fiducial markers. This method uses an iterative registration algorithm to align the markers in the reconstructed volume from the detector insert to that of the concurrent CT scan. After obtaining precise geometric information of the detector insert relative to the CT scanner, the two complementary sets of images are summed together to create a detailed image with reduced artifacts. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Comments: 14 pages, 4 figures

Controlling polarization of spintronic THz emitter by remanent magnetization texture

Authors: Weipeng Wu, Sergi Lendinez, Mojtaba Taghipour Kaffash, Richard D. Schaller, Haidan Wen, M. Benjamin Jungfleisch

Abstract: Terahertz (THz) sciences and technologies have contributed to a rapid development of a wide range of applications and expanded the frontiers in fundamental science. Spintronic terahertz emitters offer conceptual advantages since the spin orientation in the magnetic layer can be easily controlled either by the externally applied magnetic field or by the internal magnetic field distribution determin… ▽ More Terahertz (THz) sciences and technologies have contributed to a rapid development of a wide range of applications and expanded the frontiers in fundamental science. Spintronic terahertz emitters offer conceptual advantages since the spin orientation in the magnetic layer can be easily controlled either by the externally applied magnetic field or by the internal magnetic field distribution determined by the specific shape of the magnetic elements. Here, we report a switchable terahertz source based on micropatterned magnetic heterostructures driven by femtosecond laser pulses. We show that the precise tunability of the polarization state is facilitated by the underlying magnetization texture of the magnetic layer that is dictated by the shape of the microstructure. These results also reveal the underlying physical mechanisms of a nonuniform magnetization state on the generation of ultrafast spin currents in the magnetic heterostructures. Our findings indicate that the emission of the linearly polarized THz waves can be switched on and off by saturating the sample using a biasing magnetic field, opening fascinating perspectives for integrated on-chip THz devices with wide-ranging potential applications. △ Less

Submitted 15 July, 2022; originally announced July 2022.

Journal ref: Appl. Phys. Lett. 121, 052401 (2022)

On the pressure gain of stable flow systems with variable cross-section area

Authors: Haocheng Wen, Bing Wang

Abstract: For the clarification of total pressure gain performance of rotating detonation propulsion systems, the extended Hugoniot curve is proposed and discussed for the stable flow systems with variable cross-section area (SFSVA). The dimensionless pressure integral (θ) along the system walls is found to have critical impact on the pressure gain of the SFSVA with given inlet Mach number (M0) and heat rel… ▽ More For the clarification of total pressure gain performance of rotating detonation propulsion systems, the extended Hugoniot curve is proposed and discussed for the stable flow systems with variable cross-section area (SFSVA). The dimensionless pressure integral (θ) along the system walls is found to have critical impact on the pressure gain of the SFSVA with given inlet Mach number (M0) and heat release (q). The key to obtain positive pressure gain of a SFSVA is to achieve the matching θ, M0 and q. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Numerical Study on Droplet Evaporation and Propagation Stability in Normal-temperature Two-phase Rotating Detonation System

Authors: Haocheng Wen, Wenqi Fan, Sheng Xu, Bing Wang

Abstract: A numerical study is carried out on the droplet-laden two-phase rotating detonation wave (RDW) of kerosene/oxygen-enriched air at normal temperature. Two types of combustors without and with the inlet mixing section (IMS) are constructed to illustrate the effect of IMS on the combustion characteristics of two-phase RDW. The important role of the preheating zone in the IMS after the back-propagatio… ▽ More A numerical study is carried out on the droplet-laden two-phase rotating detonation wave (RDW) of kerosene/oxygen-enriched air at normal temperature. Two types of combustors without and with the inlet mixing section (IMS) are constructed to illustrate the effect of IMS on the combustion characteristics of two-phase RDW. The important role of the preheating zone in the IMS after the back-propagation shock on the droplet evaporation is analyzed. The parameter sensitivity of RDW propagation stability to the average droplet diameter d0 is further discussed. Results show that the droplets mainly evaporate after the detonation front in the combustor without IMS, and the reaction heat release is completed in a short distance, which propels continuous propagation of the detonation wave. When d0 gradually increases, the droplet evaporation distance increases, and the coupling between the incident shock and reaction is continuously weakened, finally resulting in the detonation quenching. In the combustor with IMS, a preheating zone is induced close to the contact surface by the back-propagation shock of the RDW. A large number of droplets evaporate in this zone, and generate sufficient mixture of fuel vapor and oxidizer in front of detonation wave to maintain the detonation propagation. Priority to the combustor without IMS, the droplet evaporation relies less on the inlet high-temperature airflow with the assistance of preheating zone, and thus the wave propagation stability can be enhanced and the RDW can sustain for a wider range of d0. The present analysis provides a new understanding of two-phase rotating detonation systems. △ Less

Submitted 19 March, 2022; originally announced March 2022.

Piezo-optomechanical cantilever modulators for VLSI visible photonics

Authors: Mark Dong, David Heim, Alex Witte, Genevieve Clark, Andrew J. Leenheer, Daniel Dominguez, Matthew Zimmermann, Y. Henry Wen, Gerald Gilbert, Dirk Englund, Matt Eichenfield

Abstract: Visible-wavelength very large-scale integration (VLSI) photonic circuits have potential to play important roles in quantum information and sensing technologies. The realization of scalable, high-speed, and low-loss photonic mesh circuits depends on reliable and well-engineered visible photonic components. Here we report a low-voltage optical phase shifter based on piezo-actuated mechanical cantile… ▽ More Visible-wavelength very large-scale integration (VLSI) photonic circuits have potential to play important roles in quantum information and sensing technologies. The realization of scalable, high-speed, and low-loss photonic mesh circuits depends on reliable and well-engineered visible photonic components. Here we report a low-voltage optical phase shifter based on piezo-actuated mechanical cantilevers, fabricated on a CMOS compatible, 200 mm wafer-based visible photonics platform. We show linear phase and amplitude modulation with 6 V$_π$-cm in differential operation, -1.5 dB to -2 dB insertion loss, and up to 40 dB contrast in the 700 nm - 780 nm range. By adjusting selected cantilever parameters, we demonstrate a low-displacement and a high-displacement device, both exhibiting a nearly flat frequency response from DC to a peak mechanical resonance at 23 MHz and 6.8 MHz respectively, which through resonant enhancement of Q~40, further decreases the operating voltage down to 0.15 V$_π$-cm. △ Less

Submitted 28 January, 2022; originally announced January 2022.

Comments: 13 pages, 6 figures, 3 supplementary figures

Journal ref: APL Photonics 7, 051304 (2022)

Ferroelectric superdomain controlled graphene plasmon for tunable mid-infrared photodetector with dual-band spectral selectivity

Authors: Junxiong Guo, Lin Lin, Shangdong Li, Jianbo Chen, Shicai Wang, Wanjing Wu, Ji Cai, Tingchuan Zhou, Yu Liu, Huang Wen

Abstract: Dual-band infrared photodetectors (DBIPs) can discriminate desired signals from complex scenes and thus are highly expected for threat-warning, remote sensing, and astronomy applications. Conventional DBIPs with high-performances are, however, typically based on semiconductor thin films, but remain the challenges of complex spatial align, expensive growth and cooling requirement. Here, we report a… ▽ More Dual-band infrared photodetectors (DBIPs) can discriminate desired signals from complex scenes and thus are highly expected for threat-warning, remote sensing, and astronomy applications. Conventional DBIPs with high-performances are, however, typically based on semiconductor thin films, but remain the challenges of complex spatial align, expensive growth and cooling requirement. Here, we report a tunable graphene plasmonic photodetector with dual-band infrared spectral selectivity driven by ferroelectric superdomain. The periodic ferroelectric polarization array with nanoscale ring shapes provides ultrahigh electrostatic field for spatially doping of monolayer graphene to desired patterns, and is further used to excite and confine intrinsic graphene plasmons. Our devices exhibit tunable resonance photoresponse in both two bands of 3.7-16.3 um and 15.1-52.1 um. The numerical calculations show that our devices own ultrahigh responsivities of 667-1080 A W-1 at room temperature in range of 5-50 um. Our devices make possible the applications of infrared imaging system and both stationary and motion state of objects detection. These investigations provide a novel approach for advanced infrared system construction by employing simple, low-cost, uncooling multispectral detectors array. △ Less

Submitted 5 January, 2022; v1 submitted 9 November, 2021; originally announced November 2021.

Comments: 17 pages, 5 figures

Journal ref: Carbon 189C (2022) pp. 596-603

Ultrafast carrier-lattice interactions and interlayer modulations of Bi2Se3 by X-ray free electron laser diffraction

Authors: Sungwon Kim, Youngsam Kim, Jaeseung Kim, Sungwook Choi, Kyuseok Yun, Dongjin Kim, Soo Yeon Lim, Sunam Kim, Sae Hwan Chun, Jaeku Park, Intae Eom, Kyung Sook Kim, Tae-Yeong Koo, Yunbo Ou, Ferhat Katmis, Haidan Wen, Anthony Dichiara, Donald Walko, Eric C. Landahl, Hyeonsik Cheong, Eunji Sim, Jagadeesh Moodera, Hyunjung Kim

Abstract: As a 3D topological insulator, bismuth selenide (Bi2Se3) has potential applications for electrically and optically controllable magnetic and optoelectronic devices. How the carriers interact with lattice is important to understand the coupling with its topological phase. It is essential to measure with a time scale smaller than picoseconds for initial interaction. Here we use an X-ray free-electro… ▽ More As a 3D topological insulator, bismuth selenide (Bi2Se3) has potential applications for electrically and optically controllable magnetic and optoelectronic devices. How the carriers interact with lattice is important to understand the coupling with its topological phase. It is essential to measure with a time scale smaller than picoseconds for initial interaction. Here we use an X-ray free-electron laser to perform time-resolved diffraction to study ultrafast carrier-induced lattice contractions and interlayer modulations in Bi2Se3 thin films. The lattice contraction depends on the carrier concentration and is followed by an interlayer expansion accompanied by oscillations. Using density functional theory (DFT) and the Lifshitz model, the initial contraction can be explained by van der Waals force modulation of the confined free carrier layers. Band inversion, related to a topological phase transition, is modulated by the expansion of the interlayer distance. These results provide insight into instantaneous topological phases on ultrafast timescales. △ Less

Submitted 22 March, 2021; originally announced March 2021.

Stimulated emission at 1.54 $μ$m from Erbium/Oxygen-doped silicon-based light emitting diodes

Authors: Jin Hong, Huimin Wen, Jiajing He, Jingquan Liu, Yaping Dan, Jens W. Tomm, Fangyu Yue, Junhao Chu, Chungang Duan

Abstract: Silicon-based light sources including light-emitting diodes (LEDs) and laser diodes (LDs) for information transmission are urgently needed for developing monolithic integrated silicon photonics. Silicon doped by ion implantation with erbium ions (Er$^{3+}$) is considered a promising approach, but suffers from an extremely low quantum efficiency. Here we report an electrically pumped superlinear em… ▽ More Silicon-based light sources including light-emitting diodes (LEDs) and laser diodes (LDs) for information transmission are urgently needed for developing monolithic integrated silicon photonics. Silicon doped by ion implantation with erbium ions (Er$^{3+}$) is considered a promising approach, but suffers from an extremely low quantum efficiency. Here we report an electrically pumped superlinear emission at 1.54 $μ$m from Er/O-doped silicon planar LEDs, which are produced by applying a new deep cooling process. Stimulated emission at room temperature is realized with a low threshold current of ~6 mA (~0.8 A/cm2). Time-resolved photoluminescence and photocurrent results disclose the complex carrier transfer dynamics from the silicon to Er3+ by relaxing electrons from the indirect conduction band of the silicon. This picture differs from the frequently-assumed energy transfer by electron-hole pair recombination of the silicon host. Moreover, the amplified emission from the LEDs is likely due to a quasi-continuous Er/O-related donor band created by the deep cooling technique. This work paves a way for fabricating superluminescent diodes or efficient LDs at communication wavelengths based on rare-earth doped silicon. △ Less

Submitted 8 December, 2020; originally announced December 2020.

Comments: 28 pages, 5 figures

Simultaneous Sorting of Wavelengths and Spatial Modes using Multi-Plane Light Conversion

Authors: Yuanhang Zhang, He Wen, Alireza Fardoost, Shengli Fan, Nicolas K. Fontaine, Haoshuo Chen, Patrick L. Likamwa, Guifang Li

Abstract: We propose a wavelength-mode sorter realized by multi-plane light conversion (MPLC). For the first time, to our best knowledge, wavelengths and spatial modes can be sorted simultaneously. We first demonstrate pure wavelength sorting by a series of phase masks, which could find applications in high-power wavelength beam combining (WBC) or coarse wavelength-division multiplexing (CWDM), for example.… ▽ More We propose a wavelength-mode sorter realized by multi-plane light conversion (MPLC). For the first time, to our best knowledge, wavelengths and spatial modes can be sorted simultaneously. We first demonstrate pure wavelength sorting by a series of phase masks, which could find applications in high-power wavelength beam combining (WBC) or coarse wavelength-division multiplexing (CWDM), for example. We then present a design of a 4-wavelength, 3-mode sorter using only 5 phase masks. Insertion loss (IL) and mode dependent loss (MDL) as low as 1.27 dB and 2.45 dB can be achieved, respectively. △ Less

Submitted 9 October, 2020; originally announced October 2020.

Comments: 6 pages, for a journal

Great Chiral Fluorescence from Optical Duality Silver Nanostructures Enabled by 3D Laser Printing

Authors: Hongjing Wen, Shichao Song, Fei Xie, Bin Wang, Jian Xu, Ziwei Feng, Shiyu Wu, Jing Han, Baiou Guan, Xiaoxuan Xu, Yaoyu Cao, Xiangping Li

Abstract: Featured by prominent flexibility and fidelity in producing sophisticated stereoscopic structures transdimensionally, three-dimensional (3D) laser printing technique has vastly extended the toolkit for delivering diverse functional devices. Yet chiral nanoemitters heavily resorting to artificial structures that manifest efficient emission and tightly confined light-mater interactions simultaneousl… ▽ More Featured by prominent flexibility and fidelity in producing sophisticated stereoscopic structures transdimensionally, three-dimensional (3D) laser printing technique has vastly extended the toolkit for delivering diverse functional devices. Yet chiral nanoemitters heavily resorting to artificial structures that manifest efficient emission and tightly confined light-mater interactions simultaneously remains alluring but dauntingly challenging for this technique at this moment. In this work, we assert the chiral photoluminescence is implemented from silver nanostructures of optical duality in one go via a twofold three-dimensional laser printing scheme. Such laser printing protocol allows the highly desired duality by simultaneously producing uniformly distributed fluorescent silver nanoclusters and aggregated plasmonic silver nanoparticles to tightly confine chiral interactions at the nanoscale. A helical emitter of 550 nm-helix-diameter as fabricated has seen a record-high luminescence anisotropic factor with the absolute value up to 0.58, which is two orders of magnitude greater than fluorescent chiral silver clusters. This method holds great promise for future versatile applications in chiroptical nanodevices. △ Less

Submitted 19 June, 2020; originally announced June 2020.

TSA-inspired micro tomosythesis scanner for rapid scouting of histopathology samples

Authors: David T. Nguyen, Thomas C. Larsen, Muyang Wang, Russel H. Knutsen, Zhihong Yang, Eric E. Bennett, Dumitru Mazilu, Zu-Xi Yu, Xi Tao, Danielle R. Donahue, Ahmed Gharib, Christopher K. E. Bleck, Joel Moss, Beth A. Kozel, Alan T. Remaley, Han Wen

Abstract: In pathology protocols, each tissue block can generate a large number of sections making it impractical to analyze every section. X-ray microscopy that provides a rapid survey of intact tissue blocks can help pinpoint the relevant structures in 3D space for subsequent analysis, and thus reduce workload and enable further automation downstream. Unlike dedicated virtual histology studies by traditio… ▽ More In pathology protocols, each tissue block can generate a large number of sections making it impractical to analyze every section. X-ray microscopy that provides a rapid survey of intact tissue blocks can help pinpoint the relevant structures in 3D space for subsequent analysis, and thus reduce workload and enable further automation downstream. Unlike dedicated virtual histology studies by traditional micro computed tomography (CT), routine scout imaging is constrained by a time window of minutes and minimal sample handling to avoid interfering with the pathology protocols. Traditional micro CT was not able to meet the requirements due to lengthy study times or sample alteration by the introduction of x-ray contrast agents. A form of x-ray tomosynthesis used in security screening was found to be efficient for rapid microscopy of unstained samples. When compared to a commercial micro CT scanner, it provided a 10-fold increase in imaging speed and a 4.8-fold increase in contrast-to-noise ratio. We report the results from a variety of human and animal tissue samples, where it served as an integral step of pathology protocols. In cases of vascular disease, it provided quantitative measurements of calcification in intact samples, which were difficult to obtain by standard pathology procedures. The prospect of continuous and automated screening of many samples in an assembly-line approach is discussed. △ Less

Submitted 16 May, 2020; originally announced May 2020.

Comments: 27 pages, 7 figures and 1 supplemental figure

A mass-preserving level set method for simulating 2D/3D fluid flows with evolving interface

Authors: Hao-Liang Wen, Ching-Hao Yu, Tony Wen-Hann Sheu

Abstract: Within the context of Eulerian approaches, we aim to develop a new interface-capturing solver to predict two-phase flow in 2D/3D Cartesian meshes. To achieve mass conservation and to capture interface topology accurately, a mass-preserving level set advection equation cast in the scalar sign-distance function is developed. The novelty of the proposed Eulerian solver lies in the introduction of a s… ▽ More Within the context of Eulerian approaches, we aim to develop a new interface-capturing solver to predict two-phase flow in 2D/3D Cartesian meshes. To achieve mass conservation and to capture interface topology accurately, a mass-preserving level set advection equation cast in the scalar sign-distance function is developed. The novelty of the proposed Eulerian solver lies in the introduction of a scalar speed function to rigorously reconstruct the classical level set equation. Through several benchmark problems, the proposed flow solver for solving incompressible two-phase viscous flow equations has been verified. △ Less

Submitted 18 December, 2019; originally announced December 2019.

Comments: 42 pages, 19 figures, 2 tables

Role of temperature-dependent electron trapping dynamics in the optically driven nanodomain transformation in a PbTiO${_3}$/SrTiO${_3}$ superlattice

Authors: Joonkyu Park, Youngjun Ahn, Jack A. Tilka, Hyeon Jun Lee, Anastasios Pateras, Mohammed H. Yusuf, Matthew Dawber, Haidan Wen, Paul G. Evans

Abstract: The spontaneously formed striped polarization nanodomain configuration of a PbTiO${_3}$/SrTiO${_3}$ superlattice transforms to a uniform polarization state under above-bandgap illumination with a time dependence varying with the intensity of optical illumination and a well-defined threshold intensity. Recovery after the end of illumination occurs over a temperature-dependent period of tens of seco… ▽ More The spontaneously formed striped polarization nanodomain configuration of a PbTiO${_3}$/SrTiO${_3}$ superlattice transforms to a uniform polarization state under above-bandgap illumination with a time dependence varying with the intensity of optical illumination and a well-defined threshold intensity. Recovery after the end of illumination occurs over a temperature-dependent period of tens of seconds at room temperature and shorter times at elevated temperatures. A model in which the screening of the depolarization field depends on the population of trapped electrons correctly predicts the observed temperature and optical intensity dependence. △ Less

Submitted 10 December, 2019; originally announced December 2019.

Comments: This article has been accepted by Applied Physics Letter

On numerical errors to the fields surrounding a relativistically moving particle in PIC codes

Authors: Xinlu Xu, Fei Li, Frank S. Tsung, Thamine N. Dalichaouch, Weiming An, Han Wen, Viktor K. Decyk, Ricardo A. Fonseca, Mark J. Hogan, Warren B. Mori

Abstract: The particle-in-cell (PIC) method is widely used to model the self-consistent interaction between discrete particles and electromagnetic fields. It has been successfully applied to problems across plasma physics including plasma based acceleration, inertial confinement fusion, magnetically confined fusion, space physics, astrophysics, high energy density plasmas. In many cases the physics involves… ▽ More The particle-in-cell (PIC) method is widely used to model the self-consistent interaction between discrete particles and electromagnetic fields. It has been successfully applied to problems across plasma physics including plasma based acceleration, inertial confinement fusion, magnetically confined fusion, space physics, astrophysics, high energy density plasmas. In many cases the physics involves how relativistic particles are generated and interact with plasmas. However, when relativistic particles stream across the grid both in vacuum and in plasma there are many numerical issues that may arise which can lead to incorrect physics. We present a detailed analysis of how discretized Maxwell solvers used in PIC codes can lead to numerical errors to the fields that surround particles that move at relativistic speeds across the grid. Expressions for the axial electric field as integrals in k space are presented. Two types of errors to these expressions are identified. The first arises from errors to the numerator of the integrand and leads to unphysical fields that are antisymmetric about the particle. The second arises from errors to the denominator of the integrand and lead to Cerenkov like radiation in "vacuum". These fields are not anti-symmetric, extend behind the particle, and cause the particle to accelerate or decelerate depending on the solver and parameters. The unphysical fields are studied in detail for two representative solvers - the Yee solver and the FFT based solver. A solution for eliminating these unphysical fields by modifying the k operator in the axial direction is also presented. Using a customized finite difference solver, this solution was successfully implemented into OSIRIS. Results from the customized solver are also presented. This solution will be useful for a beam of particles that all move in one direction with a small angular divergence. △ Less

Submitted 29 October, 2019; originally announced October 2019.

Comments: 38 pages, 8 figures

Pump depletion and hot electron generation in long density scale length plasma with shock ignition high intensity laser

Authors: J. Li, S. Zhang, C. M. Krauland, H. Wen, F. N. Beg, C. Ren, M. S. Wei

Abstract: Two-dimension Particle-in-cell simulations for laser plasma interaction with laser intensity of $10^{16} W/cm^2$, plasma density range of 0.01-0.28$n_c$ and scale length of $230 -330 μm$ showed significant pump depletion of the laser energy due to stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS) in the low density region ($n_e=0.01-0.2 n_c$). The simulations identified h… ▽ More Two-dimension Particle-in-cell simulations for laser plasma interaction with laser intensity of $10^{16} W/cm^2$, plasma density range of 0.01-0.28$n_c$ and scale length of $230 -330 μm$ showed significant pump depletion of the laser energy due to stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS) in the low density region ($n_e=0.01-0.2 n_c$). The simulations identified hot electrons generated by SRS in the low density region with moderate energy and by two-plasmon-decay (TPD) near $n_e=0.25n_c$ with higher energy. The overall hot electron temperature (46 keV) and conversion efficiency (3%) were consistent with the experiment measurements. The simulations also showed artificially reducing SBS would lead to stronger SRS and a softer hot electron spectrum. △ Less

Submitted 26 November, 2019; v1 submitted 27 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. E 101, 033206 (2020)

Fast and deterministic switching of vortex core induced by out-of-plane current in notch disks

Authors: Y. M. Luo, Y. Z. Wu, Z. H. Qian, J. H. Wen, H. Li, C. Q. Yu, L. Y. Zhu, T. J. Zhou

Abstract: Magnetic vortex, as one of the most interesting magnetic solitons, has attracted great interests in the past two decades. A fast and reliable method to switch vortex polarity and chirality is one of the key issues for various applications. Based on micromagnetic simulation, here we report a fast, low energy cost and deterministic switching of vortex core, through the designing of a notch structure… ▽ More Magnetic vortex, as one of the most interesting magnetic solitons, has attracted great interests in the past two decades. A fast and reliable method to switch vortex polarity and chirality is one of the key issues for various applications. Based on micromagnetic simulation, here we report a fast, low energy cost and deterministic switching of vortex core, through the designing of a notch structure in disks and the use of out-of-plane current geometry. We demonstrate that with such design, the multiple switching problems found in notch disk system can be avoided. Furthermore, the switching time can be reduced by more than 50% compared with disks without notch. △ Less

Submitted 15 September, 2019; originally announced September 2019.

Distinctive electromagnetic signals caused by gravitational waves (of sub-solar mass primordial black hole binary mergers) interacting with galactic magnetic fields

Authors: Hao Wen

Abstract: As a candidate of dark matter, and related to many fundamental physics issues, the primordial black hole (PBH) is a crucial topic. However, so far the existence of PBHs is still not confirmed, and currently running GW detectors are still not able to distinguish them from the normal astrophysical BHs. In this article, we propose that the GWs (of PBH binary mergers) could interact with the very wide… ▽ More As a candidate of dark matter, and related to many fundamental physics issues, the primordial black hole (PBH) is a crucial topic. However, so far the existence of PBHs is still not confirmed, and currently running GW detectors are still not able to distinguish them from the normal astrophysical BHs. In this article, we propose that the GWs (of PBH binary mergers) could interact with the very widespread background galactic magnetic fields in the Milky way, to produce the perturbed electromagnetic waves (EMWs) with unique characteristics of frequencies, waveforms, spectra and polarizations. In order to be distinguished from astrophysical black holes, only the PBHs with masses less than the solarmass are considered here, and their binary mergers will radiate GWs in frequencies much higher above the plasma frequency of interstellar medium (ISM), so corresponding perturbed EMWs (in the same frequencies to such GWs) can propagate through the ISM until the Earth. Our estimations show that, for the sub-solar mass PBH binary mergers within the Milky way (disk or halo), the strengths of the perturbed EMWs turn into constant levels around 10^{-12} Tesla (for magnetic components) and around 10^{-10}Watt m^{-2} (for energy flux densities) at the Earth, generally for all cases of different PBH masses (and not dependent on the distance of sources), and the same mass ratio of the PBH binary gives the same strength (at the Earth) of perturbed EMWs despite different PBH masses (GW frequencies) or binary distances. Differently, for the PBH binary mergers outside the Milky way, the perturbed EMWs at Earth have lower strengths (and depend on the distance of sources), but for some part of distance range, they would also be detectable. If such EM signals and special EM counterpart of GWs from PBHs could be detected by space- or land-based EMWs detectors, it may provide direct evidence of the PBHs. △ Less

Submitted 9 July, 2019; v1 submitted 2 July, 2019; originally announced July 2019.

Comments: 9 page, 5 figures

Efficient Er/O Doped Silicon Light-Emitting Diodes at Communication Wavelength by Deep Cooling

Authors: Huimin Wen, Jiajing He, Jin Hong, Fangyu Yue, Yaping Dan

Abstract: A silicon light source at communication wavelength is the bottleneck for developing monolithically integrated silicon photonics. Doping silicon with erbium ions was believed to be one of the most promising approaches but suffers from the aggregation of erbium ions that are efficient non-radiative centers, formed during the standard rapid thermal treatment. Here, we apply a deep cooling process fol… ▽ More A silicon light source at communication wavelength is the bottleneck for developing monolithically integrated silicon photonics. Doping silicon with erbium ions was believed to be one of the most promising approaches but suffers from the aggregation of erbium ions that are efficient non-radiative centers, formed during the standard rapid thermal treatment. Here, we apply a deep cooling process following the high-temperature annealing to suppress the aggregation of erbium ions by flushing with Helium gas cooled in liquid nitrogen. The resultant light emitting efficiency is increased to a record 14% at room temperature, two orders of magnitude higher than the sample treated by the standard rapid thermal annealing. The deep-cooling-processed Si samples were further made into light-emitting diodes. Bright electroluminescence with a spectral peak at 1.54 um from the silicon-based diodes was also observed at room temperature. With these results, it is promising to develop efficient silicon lasers at communication wavelength for the monolithically integrated silicon photonics. △ Less

Submitted 22 January, 2019; originally announced January 2019.

Comments: 14 pages, 3 figures

Optimization of neutron diffraction from phase-gratings

Authors: B. Heacock, D. Sarenac, D. G. Cory, M. G. Huber, D. S. Hussey, C. Kapahi, H. Miao, H. Wen, D. A. Pushin

Abstract: The recent development of phase-grating moiré neutron interferometry promises a wide range of impactful experiments from dark-field imaging of material microstructure to precise measurements of fundamental constants. However, the contrast of 3 % obtained using this moiré interferometer was well below the theoretical prediction of 30 % using ideal gratings. It is suspected that non-ideal aspects of… ▽ More The recent development of phase-grating moiré neutron interferometry promises a wide range of impactful experiments from dark-field imaging of material microstructure to precise measurements of fundamental constants. However, the contrast of 3 % obtained using this moiré interferometer was well below the theoretical prediction of 30 % using ideal gratings. It is suspected that non-ideal aspects of the phase-gratings was a leading contributor to this deficiency and that phase-gratings needed to be quantitatively assessed and optimized. Here we characterize neutron diffraction from phase-gratings using Bragg diffraction crystals to determine the optimal phase-grating orientations. We show well-defined diffraction peaks and explore perturbations to the diffraction peaks and the effects on interferometer contrast as a function of grating alignment. This technique promises to improve the contrast of the grating interferometers by providing in-situ aides to grating alignment. △ Less

Submitted 13 November, 2018; originally announced December 2018.

Winding of a Brownian particle around a point vortex

Authors: Huanyu Wen, Jean-Luc Thiffeault

Abstract: We derive the asymptotic winding law of a Brownian particle in the plane subjected to a tangential drift due to a point vortex. For winding around a point, the normalized winding angle converges to an inverse Gamma distribution. For winding around a disk, the angle converges to a distribution given by an elliptic theta function. For winding in an annulus, the winding angle is asymptotically Gaussi… ▽ More We derive the asymptotic winding law of a Brownian particle in the plane subjected to a tangential drift due to a point vortex. For winding around a point, the normalized winding angle converges to an inverse Gamma distribution. For winding around a disk, the angle converges to a distribution given by an elliptic theta function. For winding in an annulus, the winding angle is asymptotically Gaussian with a linear drift term. We validate our results with numerical simulations. △ Less

Submitted 31 October, 2018; originally announced October 2018.

Comments: 16 pages, 16 figures. SIAM LaTeX style

Journal ref: Philosophical Transactions of the Royal Society A 377, 20180347 (2019)

Ultra-low-frequency electromagnetic waves as signals and special counterparts of gravitational waves (from binary mergers) having tensorial and possible nontensorial polarizations

Authors: Hao Wen

Abstract: Gravitational waves (GWs, from binary merger) interacting with super-strong magnetic fields of the neutron star (in the same binary system), would lead to perturbed electromagnetic waves [EMWs, in the same frequencies of these GWs, partially in the ultra-low-frequency (ULF) band for the EMWs]. Such perturbed ULF-EMWs are not only the signals, but also a new type of special EM counterparts of the G… ▽ More Gravitational waves (GWs, from binary merger) interacting with super-strong magnetic fields of the neutron star (in the same binary system), would lead to perturbed electromagnetic waves [EMWs, in the same frequencies of these GWs, partially in the ultra-low-frequency (ULF) band for the EMWs]. Such perturbed ULF-EMWs are not only the signals, but also a new type of special EM counterparts of the GWs. Here, generation of the perturbed ULF-EMWs is investigated for the first time, and the strengths of their magnetic components are estimated to be around 10^{-12}Tesla to 10^{-17}Tesla (in fISCO) at the Earth for various cases [not including the influence of interstellar medium (ISM)].The components with higher frequencies of the ULF-EMWs (e.g., especially produced by the GWs of the post-merger stage) above 1.8kHz (typical plasma frequency around solar system in the Milky way), could propagate through the ISM from the source until the Earth, and the perturbed ULF-EMWs will be reprocessed before they arrived at the Earth due to the ISM. Also, the waveforms of the perturbed ULF-EMWs will be modified into shapes different but related to the waveforms of the GWs, by the amplification process during the binary mergers which could amplify the magnetic fields into 10^{12}Tesla or even higher. Specific connection relationships between the polarizations of the perturbed ULF-EMWs and the polarizations (tensorial and possible nontensorial) of the GWs of binary mergers, are also addressed here. Characteristic properties of the perturbed ULF-EMWs (which would bring us some different new information of fundamental properties of the gravity and Universe) will be very helpful for extracting the signals from background noise for possible observations in the future. △ Less

Submitted 26 June, 2020; v1 submitted 5 October, 2018; originally announced October 2018.

Comments: 16 pages, 6 figures

Sub-micrometer resolution neutron tomography

Authors: B. Heacock, D. Sarenac, D. G. Cory, M. G. Huber, J. P. W. MacLean, H. Miao, H. Wen, D. A. Pushin

Abstract: We demonstrate a neutron tomography technique with sub-micrometer spatial resolution. Our method consists of measuring neutron diffraction spectra using a double crystal diffractometer as a function of sample rotation and then using a phase retrieval algorithm followed by tomographic reconstruction to generate a density map of the sample. In this first demonstration, silicon phase-gratings are use… ▽ More We demonstrate a neutron tomography technique with sub-micrometer spatial resolution. Our method consists of measuring neutron diffraction spectra using a double crystal diffractometer as a function of sample rotation and then using a phase retrieval algorithm followed by tomographic reconstruction to generate a density map of the sample. In this first demonstration, silicon phase-gratings are used as samples, the periodic structure of which allows the shape of the gratings to be imaged without the need of position sensitive detectors. Topological features found in the reconstructions also appear in scanning electron micrographs. The reconstructions have a resolution of about 300 nm, which is over an order of magnitude smaller than the resolution of radiographic, phase contrast, differential phase contrast, and dark field neutron tomography methods. Further optimization of the underlying phase recovery and tomographic reconstruction algorithm is also considered. △ Less

Submitted 22 August, 2018; originally announced August 2018.

Three-dimensional particle-in-cell modeling of parametric instabilities near the quarter-critical density in plasmas

Authors: H. Wen, A. V. Maximov, R. Yan, J. Li, C. Ren, F. S. Tsung

Abstract: The nonlinear regime of laser-plasma interaction including both two-plasmon--decay (TPD) and stimulated Raman scattering (SRS) instabilities has been studied in three-dimensional (3-D) particle-in-cell simulations with parameters relevant to the inertial confinement fusion (ICF) experiments. SRS and TPD develop in the same region in plasmas, and the generation of fast electrons can be described ac… ▽ More The nonlinear regime of laser-plasma interaction including both two-plasmon--decay (TPD) and stimulated Raman scattering (SRS) instabilities has been studied in three-dimensional (3-D) particle-in-cell simulations with parameters relevant to the inertial confinement fusion (ICF) experiments. SRS and TPD develop in the same region in plasmas, and the generation of fast electrons can be described accurately with only the full model including both SRS and TPD. The growth of instabilities in the linear stage is found to be in good agreement with analytical theories. In the saturation stage the enhanced low-frequency density perturbations driven by the daughter waves of the SRS sidescattering can saturate the TPD and consequently inhibit the fast-electron generation. The fast-electron flux in 3-D modeling is up to an order of magnitude smaller than previously reported in 2-D TPD simulations, bringing it close to the results of ICF experiments. △ Less

Submitted 15 April, 2019; v1 submitted 19 June, 2018; originally announced June 2018.

Comments: 5 pages, 4 figures, 1 table

Journal ref: Phys. Rev. E 100, 041201 (2019)

Three Phase-Grating Moire Neutron Interferometer for Large Interferometer Area Applications

Authors: D. Sarenac, D. A. Pushin, M. G. Huber, D. S. Hussey, H. Miao, M. Arif, D. G. Cory, A. D. Cronin, B. Heacock, D. L. Jacobson, J. M. LaManna, H. Wen

Abstract: We demonstrate a three phase-grating neutron interferometer as a robust candidate for large area interferometry applications and characterization of materials. This novel far-field moire technique allows for broad wavelength acceptance and relaxed requirements related to fabrication and alignment, circumventing the main obstacles associated with perfect crystal neutron interferometry. Interference… ▽ More We demonstrate a three phase-grating neutron interferometer as a robust candidate for large area interferometry applications and characterization of materials. This novel far-field moire technique allows for broad wavelength acceptance and relaxed requirements related to fabrication and alignment, circumventing the main obstacles associated with perfect crystal neutron interferometry. Interference fringes were observed with a total interferometer length of four meters, and the effects of an aluminum 6061 alloy sample on the coherence of the system was examined. Experiments to measure the autocorrelation length of samples and the universal gravitational constant are proposed and discussed. △ Less

Submitted 17 August, 2017; originally announced August 2017.

Journal ref: Phys. Rev. Lett. 120, 113201 (2018)

Broadband Neutron Interferometer

Authors: Dmitry A. Pushin, Dusan Sarenac, Dan Hussey, Houxun Miao, Muhammad Arif, David G. Cory, Michael G. Huber, David Jacobson, Jacob LaManna, Joseph D. Parker, Taken Shinohara, Wakana Ueno, Han Wen

Abstract: We demonstrate a two phase-grating, multi-beam neutron interferometer by using a modified Ronchi setup in a far-field regime. The functionality of the interferometer is based on the universal \moire effect that was recently implemented for X-ray phase-contrast imaging in the far-field regime. Interference fringes were achieved with monochromatic, bichromatic, and polychromatic neutron beams; for b… ▽ More We demonstrate a two phase-grating, multi-beam neutron interferometer by using a modified Ronchi setup in a far-field regime. The functionality of the interferometer is based on the universal \moire effect that was recently implemented for X-ray phase-contrast imaging in the far-field regime. Interference fringes were achieved with monochromatic, bichromatic, and polychromatic neutron beams; for both continuous and pulsed beams. This far-field neutron interferometry allows for the utilization of the full neutron flux for precise measurements of potential gradients, and expands neutron phase-contrast imaging techniques to more intense polycromatic neutron beams. △ Less

Submitted 9 June, 2016; originally announced June 2016.

Journal ref: Phys. Rev. A 95, 043637 (2017)

Demonstration of a white beam far-field neutron interferometer for spatially resolved small angle neutron scattering

Authors: Daniel S. Hussey, Houxun Miao, Guangcui Yuan, Dmitry Pushin, Dusan Sarenac, Michael G. Huber, David L. Jacobson, Jacob M. LaManna, Han Wen

Abstract: We provide the first demonstration that a neutron far-field interferometer can be employed to measure the microstructure of a sample. The interferometer is based on the moiré pattern of two phase modulating gratings which was previously realized in hard x-ray and visible light experiments. The autocorrelation length of this interferometer, and hence the microstructure length scale that is probed,… ▽ More We provide the first demonstration that a neutron far-field interferometer can be employed to measure the microstructure of a sample. The interferometer is based on the moiré pattern of two phase modulating gratings which was previously realized in hard x-ray and visible light experiments. The autocorrelation length of this interferometer, and hence the microstructure length scale that is probed, is proportional to the grating spacing and the neutron wavelength, and can be varied over several orders of magnitude for one pair of gratings. We compare our measurements of the change in visibility from monodisperse samples with calculations which show reasonable agreement. The potential advantages of a far-field neutron interferometer include high fringe visibility in a polychromatic beam (over 30 %), no requirement for an absorbing grating to resolve the interference fringes, and the ability to measure the microstructure in the length scale range of 100 nm to 10 \mum by varying either the grating spacing or neutron wavelength with a broad wavelength range and single set of gratings. △ Less

Submitted 9 June, 2016; originally announced June 2016.

Signal photon flux generated by high-frequency relic gravitational waves

Authors: Xin Li, Sai Wang, Hao Wen

Abstract: The power spectrum of primordial tensor perturbations $\mathcal{P}_t$ increases rapidly in high frequency region if the spectral index $n_t>0$. It is shown that the amplitude of relic gravitational wave $h_t$($5\times10^9$Hz) varies from $10^{-36}$ to $10^{-25}$ while $n_t$ varies from $-6.25\times 10^{-3}$ to $0.87$. High frequency gravitational waves detector that is proposed by F.-Y. Li detects… ▽ More The power spectrum of primordial tensor perturbations $\mathcal{P}_t$ increases rapidly in high frequency region if the spectral index $n_t>0$. It is shown that the amplitude of relic gravitational wave $h_t$($5\times10^9$Hz) varies from $10^{-36}$ to $10^{-25}$ while $n_t$ varies from $-6.25\times 10^{-3}$ to $0.87$. High frequency gravitational waves detector that is proposed by F.-Y. Li detects gravitational waves through observing the perturbed photon flux that is generated by interaction between the relic gravitational waves and electromagnetic system. It is shown that the perturbative photon flux $N_x^1$($5\times10^9$Hz) varies from $1.40\times10^{-4}\rm s^{-1}$ to $2.85\times10^{7}\rm s^{-1}$ while $n_t$ varies from $-6.25\times 10^{-3}$ to $0.87$. Correspondingly, the ratio of the transverse perturbative photon flux $N_x^1$ to the background photon flux varies from $10^{-28}$ to $10^{-16}$. △ Less

Submitted 26 August, 2015; originally announced September 2015.

Comments: 10 pages, 4 figures