-
A mushy source for the geysers of Enceladus
Authors:
Colin R. Meyer,
Jacob J. Buffo,
Francis Nimmo,
Andrew J. Wells,
Samuel Boury,
Tara C. Tomlinson,
Jamie R. G. Parkinson,
Geoffrey M. Vasil
Abstract:
Enceladus is a primary target for astrobiology due to the $\rm H_2O$ plume ejecta measured by the Cassini spacecraft and the inferred subsurface ocean sustained by tidal heating. Sourcing the plumes via a direct connection from the ocean to the surface requires a fracture through the entire ice shell ($\sim$10 km). Here we explore an alternative mechanism in which shear heating within shallower ti…
▽ More
Enceladus is a primary target for astrobiology due to the $\rm H_2O$ plume ejecta measured by the Cassini spacecraft and the inferred subsurface ocean sustained by tidal heating. Sourcing the plumes via a direct connection from the ocean to the surface requires a fracture through the entire ice shell ($\sim$10 km). Here we explore an alternative mechanism in which shear heating within shallower tiger stripe fractures produces partial melting in the ice shell and interstitial convection allows fluid to be ejected as geysers. We use an idealized two-dimensional multiphase reactive transport model to simulate the thermomechanics of a mushy region generated by an upper bound estimate for the localized shear heating rate in a salty ice shell. From our simulations, we predict the temperature, porosity, salt content, melting rate, and liquid volume of an intrashell mushy zone surrounding a fracture. We find that the rate of internal melting can match the observed $\rm H_2O$ eruption rate and that there is sufficient brine volume within the mushy zone to sustain the geysers for $\sim350$ kyr without additional melting. The composition of the liquid brine is, however, distinct from that of the ocean, due to partial melting. This shear heating mechanism for geyser formation applies to Enceladus and other icy moons and has implications for our understanding of the geophysical processes and astrobiological potential of icy satellites.
△ Less
Submitted 24 April, 2023; v1 submitted 13 August, 2022;
originally announced August 2022.
-
A stochastic model for the turbulent ocean heat flux under Arctic sea ice
Authors:
Srikanth Toppaladoddi,
Andrew J. Wells
Abstract:
The physics of planetary climate features a variety of complex systems that are challenging to model as they feature turbulent flows. A key example is the heat flux from the upper ocean to the underside of sea ice which provides a key contribution to the evolution of the Arctic sea ice cover. Here, we develop a model of the turbulent ice-ocean heat flux using coupled ordinary stochastic differenti…
▽ More
The physics of planetary climate features a variety of complex systems that are challenging to model as they feature turbulent flows. A key example is the heat flux from the upper ocean to the underside of sea ice which provides a key contribution to the evolution of the Arctic sea ice cover. Here, we develop a model of the turbulent ice-ocean heat flux using coupled ordinary stochastic differential equations to model fluctuations in the vertical velocity and temperature in the Arctic mixed layer. All the parameters in the model are determined from observational data. A detailed comparison between the model results and measurements made during the Surface Heat Budget of the Arctic Ocean (SHEBA) project reveals that the model is able to capture the probability density functions (PDFs) of velocity, temperature and heat flux fluctuations. Furthermore, we show that the temperature in the upper layer of the Arctic ocean can be treated as a passive scalar during the whole year of SHEBA measurements. The stochastic model developed here provides a computationally inexpensive way to compute an observationally consistent PDF of this heat flux, and has implications for its parametrization in regional and global climate models.
△ Less
Submitted 15 January, 2025; v1 submitted 26 August, 2021;
originally announced August 2021.
-
Convection in a mushy-layer along a heated wall
Authors:
Samuel Boury,
Colin R. Meyer,
Geoffrey M. Vasil,
Andrew J. Wells
Abstract:
Motivated by the mushy zones of sea ice, volcanoes, and icy moons of the outer solar system, we perform a theoretical and numerical study of boundary-layer convection along a vertical heated wall in a bounded ideal mushy region. The mush is comprised of a porous and reactive binary alloy with a mixture of saline liquid in a solid matrix, and is studied in the near-eutectic approximation. Here we d…
▽ More
Motivated by the mushy zones of sea ice, volcanoes, and icy moons of the outer solar system, we perform a theoretical and numerical study of boundary-layer convection along a vertical heated wall in a bounded ideal mushy region. The mush is comprised of a porous and reactive binary alloy with a mixture of saline liquid in a solid matrix, and is studied in the near-eutectic approximation. Here we demonstrate the existence of four regions and study their behavior asymptotically. Starting from the bottom of the wall, the four regions are (i) an isotropic corner region; (ii) a buoyancy dominated vertical boundary layer; (iii) an isotropic connection region; and (iv) a horizontal boundary layer at the top boundary with strong gradients of pressure and buoyancy. Scalings from numerical simulations are consistent with the theoretical predictions. Close to the heated wall, the convection in the mushy layer is similar to a rising buoyant plume abruptly stopped at the top, leading to increased pressure and temperature in the upper region, whose impact is discussed as an efficient melting mechanism.
△ Less
Submitted 12 March, 2021;
originally announced March 2021.
-
Thermal Convection over Fractal Surfaces
Authors:
Srikanth Toppaladoddi,
Andrew J. Wells,
Charles R. Doering,
John S. Wettlaufer
Abstract:
We use well resolved numerical simulations with the Lattice Boltzmann Method to study Rayleigh-Bénard convection in cells with a fractal boundary in two dimensions for $Pr = 1$ and $Ra \in \left[10^7, 10^{10}\right]$. The fractal boundaries are functions characterized by power spectral densities $S(k)$ that decay with wavenumber, $k$, as $S(k) \sim k^{p}$ ($p < 0$). The degree of roughness is quan…
▽ More
We use well resolved numerical simulations with the Lattice Boltzmann Method to study Rayleigh-Bénard convection in cells with a fractal boundary in two dimensions for $Pr = 1$ and $Ra \in \left[10^7, 10^{10}\right]$. The fractal boundaries are functions characterized by power spectral densities $S(k)$ that decay with wavenumber, $k$, as $S(k) \sim k^{p}$ ($p < 0$). The degree of roughness is quantified by the exponent $p$ with $p < -3$ for smooth (differentiable) surfaces and $-3 \le p < -1$ for rough surfaces with Hausdorff dimension $D_f=\frac{1}{2}(p+5)$. By computing the exponent $β$ in power law fits $Nu \sim Ra^β$, where $Nu$ and $Ra$ are the Nusselt and the Rayleigh numbers for $Ra \in \left[10^8, 10^{10}\right]$, we observe that heat transport scaling increases with roughness over the top two decades of $Ra \in \left[10^8, 10^{10}\right]$. For $p$ $= -3.0$, $-2.0$ and $-1.5$ we find $β= 0.288 \pm 0.005, 0.329 \pm 0.006$ and $0.352 \pm 0.011$, respectively. We also observe that the Reynolds number, $Re$, scales as $Re \sim Ra^ξ$, where $ξ\approx 0.57$ over $Ra \in \left[10^7, 10^{10}\right]$, for all $p$ used in the study. For a given value of $p$, the averaged $Nu$ and $Re$ are insensitive to the specific realization of the roughness.
△ Less
Submitted 26 July, 2020; v1 submitted 27 August, 2019;
originally announced August 2019.
-
The solidification of a disk-shaped crystal from a weakly supercooled binary melt
Authors:
David W. Rees Jones,
Andrew J. Wells
Abstract:
The physics of ice crystal growth from the liquid phase, especially in the presence of salt, has received much less attention than the growth of snow crystals from the vapour phase. The growth of so-called frazil ice by solidification of a supercooled aqueous salt solution is consistent with crystal growth in the basal plane being limited by the diffusive removal of the latent heat of solidificati…
▽ More
The physics of ice crystal growth from the liquid phase, especially in the presence of salt, has received much less attention than the growth of snow crystals from the vapour phase. The growth of so-called frazil ice by solidification of a supercooled aqueous salt solution is consistent with crystal growth in the basal plane being limited by the diffusive removal of the latent heat of solidification from the solid--liquid interface, while being limited by attachment kinetics in the perpendicular direction. This leads to the formation of approximately disk-shaped crystals with a low aspect ratio of thickness compared to radius, because radial growth is much faster than axial growth. We calculate numerically how fast disk-shaped crystals grow in both pure and binary melts, accounting for the comparatively slow axial growth, the effect of dissolved solute in the fluid phase and the difference in thermal properties between solid and fluid phases. We identify the main physical mechanisms that control crystal growth and show that the diffusive removal of both the latent heat released and also the salt rejected at the growing interface are significant. Our calculations demonstrate that certain previous parameterizations, based on scaling arguments, substantially underestimate crystal growth rates by a factor of order 10-100 for low aspect ratio disks, and provide a parameterization for use in models of ice crystal growth in environmental settings.
△ Less
Submitted 31 July, 2015; v1 submitted 10 April, 2015;
originally announced April 2015.
-
Nonlinear mushy-layer convection with chimneys: stability and optimal solute fluxes
Authors:
Andrew J. Wells,
John S. Wettlaufer,
Steven A. Orszag
Abstract:
We model buoyancy-driven convection with chimneys -- channels of zero solid fraction -- in a mushy layer formed during directional solidification of a binary alloy in two-dimensions. A large suite of numerical simulations is combined with scaling analysis in order to study the parametric dependence of the flow. Stability boundaries are calculated for states of finite-amplitude convection with chim…
▽ More
We model buoyancy-driven convection with chimneys -- channels of zero solid fraction -- in a mushy layer formed during directional solidification of a binary alloy in two-dimensions. A large suite of numerical simulations is combined with scaling analysis in order to study the parametric dependence of the flow. Stability boundaries are calculated for states of finite-amplitude convection with chimneys, which for a narrow domain can be interpreted in terms of a modified Rayleigh number criterion based on the domain width and mushy-layer permeability. For solidification in a wide domain with multiple chimneys, it has previously been hypothesised that the chimney spacing will adjust to optimise the rate of removal of potential energy from the system. For a wide variety of initial liquid concentration conditions, we consider the detailed flow structure in this optimal state and derive scaling laws for how the flow evolves as the strength of convection increases. For moderate mushy-layer Rayleigh numbers these flow properties support a solute flux that increases linearly with Rayleigh number. This behaviour does not persist indefinitely, however, with porosity-dependent flow saturation resulting in sub-linear growth of the solute flux for sufficiently large Rayleigh numbers. Finally, we consider the influence of the porosity dependence of permeability, with a cubic function and a Carmen-Kozeny permeability yielding qualitatively similar system dynamics and flow profiles for the optimal states.
△ Less
Submitted 21 December, 2012; v1 submitted 4 May, 2012;
originally announced May 2012.
-
Finite-sample-size effects on convection in mushy layers
Authors:
Jin-Qiang Zhong,
Anthony T. Fragoso,
Andrew J. Wells,
John S. Wettlaufer
Abstract:
We report theoretical and experimental investigations of the flow instability responsible for the mushy-layer mode of convection and the formation of chimneys, drainage channels devoid of solid, during steady-state solidification of aqueous ammonium chloride. Under certain growth conditions a state of steady mushy-layer growth with no flow is unstable to the onset of convection, resulting in the f…
▽ More
We report theoretical and experimental investigations of the flow instability responsible for the mushy-layer mode of convection and the formation of chimneys, drainage channels devoid of solid, during steady-state solidification of aqueous ammonium chloride. Under certain growth conditions a state of steady mushy-layer growth with no flow is unstable to the onset of convection, resulting in the formation of chimneys. We present regime diagrams to quantify the state of the flow as a function of the initial liquid concentration, the porous-medium Rayleigh number, and the sample width. For a given liquid concentration, increasing both the porous-medium Rayleigh number and the sample width caused the system to change from a stable state of no flow to a different state with the formation of chimneys. Decreasing the concentration ratio destabilized the system and promoted the formation of chimneys. As the initial liquid concentration increased, onset of convection and formation of chimneys occurred at larger values of the porous-medium Rayleigh number, but the critical cell widths for chimney formation are far less sensitive to the liquid concentration. At the highest liquid concentration, the mushy-layer mode of convection did not occur in the experiment. The formation of multiple chimneys and the morphological transitions between these states are discussed. The experimental results are interpreted in terms of a previous theoretical analysis of finite amplitude convection with chimneys, with a single value of the mushy-layer permeability consistent with the liquid concentrations considered in this study.
△ Less
Submitted 10 January, 2012;
originally announced January 2012.
-
Optimal and hysteretic fluxes in alloy solidification: Variational principles and chimney spacing
Authors:
Andrew J. Wells,
J. S. Wettlaufer,
Steven A. Orszag
Abstract:
We take a numerical approach to analyze the mechanisms controlling the spacing of chimneys -- channels devoid of solid -- in two-dimensional mushy layers formed by solidifying a binary alloy. Chimneys are the principal conduits through which buoyancy effects transport material out of the mushy layer and into the liquid from which it formed. Experiments show a coarsening of chimney spacing and we p…
▽ More
We take a numerical approach to analyze the mechanisms controlling the spacing of chimneys -- channels devoid of solid -- in two-dimensional mushy layers formed by solidifying a binary alloy. Chimneys are the principal conduits through which buoyancy effects transport material out of the mushy layer and into the liquid from which it formed. Experiments show a coarsening of chimney spacing and we pursue the hypothesis that this observation is a consequence of a variational principle: the chimney spacing adjusts to optimize material transport and hence maximize the rate of removal of potential energy stored in the mushy layer. The optimal solute flux increases approximately linearly with the mushy layer Rayleigh number. However, for spacings below a critical value the chimneys collapse and solute fluxes cease, revealing a hysteresis between chimney convection and no flow.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
