-
Energy absorption of sustainable lattice structures under impact loading
Authors:
Sören Bieler,
Kerstin Weinberg
Abstract:
Lattice structures are increasingly used in various fields of application due to the steady growth of additive manufacturing technology. Depending on the type of lattice, these structures are more or less suitable for energy absorption due to the deformation of diagonal struts. The energy absorption properties depend significantly on the type of the selected lattice structure and its density, mate…
▽ More
Lattice structures are increasingly used in various fields of application due to the steady growth of additive manufacturing technology. Depending on the type of lattice, these structures are more or less suitable for energy absorption due to the deformation of diagonal struts. The energy absorption properties depend significantly on the type of the selected lattice structure and its density, material properties, printing process, and post-treatment. Here, five lattice types (Octet, BFCC, Diamond, Truncated Octahedron and Rhombicuboctahedron) with different volume fractions are compared. Stereolithography is used to print the different lattices made from liquid resin. This allows good results to be achieved with tiny structures. In particular, the sustainability of energy-absorbing structures plays a significant role in many processes to withstand multiple loads. The lattice structures are made of TPU resin and offer different energy absorption properties without being destroyed under load. The structures are loaded abruptly using the Split-Hopkinson pressure bar test in a modified setup. From the measured strain pulses, we can calculate how much of the applied energy was absorbed by the different structures
△ Less
Submitted 9 December, 2024;
originally announced December 2024.
-
Energy absorption of sustainable lattice structures under static compression
Authors:
Sören Bieler,
Kerstin Weinberg
Abstract:
Lattice-like cellular materials, with their unique combination of lightweight, high strength, and good deformability, are promising for engineering applications. This paper investigates the energy-absorbing properties of four truss-lattice structures with two defined volume fractions of material in static compression experiments. The mass-specific energy absorption is derived. The specimens are ma…
▽ More
Lattice-like cellular materials, with their unique combination of lightweight, high strength, and good deformability, are promising for engineering applications. This paper investigates the energy-absorbing properties of four truss-lattice structures with two defined volume fractions of material in static compression experiments. The mass-specific energy absorption is derived. The specimens are manufactured by SLA printing of viscoelastic polymeric material. Sustainability implies that the lattice structures can withstand multiple loads and return to their original state after some recovery. Additionally, we present finite element simulations of our experiments and show that these calculations are, in principle, able to predict the different responses of the lattices. Like in the experiments, the truncated octahedron-lattice structure proved to be the most effective for energy absorption under strong compression.
△ Less
Submitted 9 December, 2024;
originally announced December 2024.
-
Effect of physical aging on the flexural creep in 3D printed thermoplastic
Authors:
Marcel Fischbach,
Kerstin Weinberg
Abstract:
Extrusion-based 3D printing has become one of the most common additive manufacturing methods and is widely used in engineering. This contribution presents the results of flexural creep experiments on 3D printed PLA specimens, focusing on changes in creep behavior due to physical aging. It is shown experimentally that the creep curves obtained on aged specimens are shifted to each other on the loga…
▽ More
Extrusion-based 3D printing has become one of the most common additive manufacturing methods and is widely used in engineering. This contribution presents the results of flexural creep experiments on 3D printed PLA specimens, focusing on changes in creep behavior due to physical aging. It is shown experimentally that the creep curves obtained on aged specimens are shifted to each other on the logarithmic time scale in a way that the theory of physical aging can explain. The reason for the physical aging of 3D printed thermoplastics is assumed to be the special heat treatment that the polymer undergoes during extrusion. Additionally, results of a long-term flexural creep experiment are shown, demonstrating that non-negligible creep over long periods can be observed even at temperatures well below the glass transition temperature. Such creep effects should be considered for designing components made of 3D printed thermoplastics.
△ Less
Submitted 16 August, 2023; v1 submitted 22 February, 2023;
originally announced February 2023.
-
Green laser powder bed fusion based fabrication and rate-dependent mechanical properties of copper lattices
Authors:
Sung-Gyu Kang,
Ramil Gainov,
Daniel Heußen,
Sören Bieler,
Zhongji Sun,
Kerstin Weinberg,
Gerhard Dehm,
Rajaprakash Ramachandramoorthy
Abstract:
Lattice structures composed of periodic solid frames and pores can be utilized in energy absorption applications due to their high specific strength and large deformation. However, these structures typically suffer from post-yield softenings originating from the limited plasticity of available material choices. This study aims to resolve such an issue by fabricating lattice structures made of duct…
▽ More
Lattice structures composed of periodic solid frames and pores can be utilized in energy absorption applications due to their high specific strength and large deformation. However, these structures typically suffer from post-yield softenings originating from the limited plasticity of available material choices. This study aims to resolve such an issue by fabricating lattice structures made of ductile pure copper (Cu). For the first time, Cu lattice structures are fabricated through laser-powder bed fusion (L-PBF) with green laser (λ = 515 nm). Structural and microstructural analysis confirm that the lattice structures consist of well-defined unit cells and show dense microstructure. The deformation behavior is investigated under a wide range of strain rates from ~0.001 /s to ~1000 /s. The stress-strain curves exhibit a smooth and continuous deformation without any post-yield softening, which can be attributed to the intrinsic mechanical properties of Cu. Correlated with post-mortem microscopy examination, the rate-dependent deformation behavior of pure Cu lattice structures is investigated and rationalized. The current work suggests that the complex Cu architectures can be fabricated by L-PBF with green laser and the lattice structures made of ductile metal are suitable for dynamic loading applications.
△ Less
Submitted 24 October, 2022;
originally announced October 2022.
-
Dynamic phase-field fracture with a first-order discontinuous Galerkin method for elastic waves
Authors:
Kerstin Weinberg,
Christian Wieners
Abstract:
We present a new numerical approach for wave induced dynamic fracture. The method is based on a discontinuous Galerkin approximation of the first-order hyperbolic system for elastic waves and a phase-field approximation of brittle fracture driven by the maximum tension. The algorithm is staggered in time and combines an implicit midpoint rule for the wave propagation followed by an implicit Euler…
▽ More
We present a new numerical approach for wave induced dynamic fracture. The method is based on a discontinuous Galerkin approximation of the first-order hyperbolic system for elastic waves and a phase-field approximation of brittle fracture driven by the maximum tension. The algorithm is staggered in time and combines an implicit midpoint rule for the wave propagation followed by an implicit Euler step for the phase-field evolution. At fracture, the material is degraded, and the waves are reflected at the diffusive interfaces. Two and three-dimensional examples demonstrate the advantages of the proposed method for the computation of crack growth and spalling initiated by reflected and superposed waves.
△ Less
Submitted 19 September, 2021; v1 submitted 29 June, 2021;
originally announced June 2021.
-
Ice penetration by a bluff-body melting probe
Authors:
Kerstin Weinberg,
Michael Ortiz
Abstract:
We analyze the operation of melting probes as a Stefan problem for the liquid/solid interface surrounding the probe. We assume that the liquid layer is thin and, therefore, amenable to analysis by lubrication theory. The resulting Stefan problem is solvable in closed form. The solution determines the dependence of the penetration speed on the temperature differential between the probe and the surr…
▽ More
We analyze the operation of melting probes as a Stefan problem for the liquid/solid interface surrounding the probe. We assume that the liquid layer is thin and, therefore, amenable to analysis by lubrication theory. The resulting Stefan problem is solvable in closed form. The solution determines the dependence of the penetration speed on the temperature differential between the probe and the surrounding ice, the size, shape and weight of the probe, the viscosity of liquid water and the thermal properties of solid ice.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
