-
Spring-block friction model for landslides: Application to Vaiont and Maoxian landslides
Authors:
Rong Qiang Wei,
Qing Li Zeng
Abstract:
It is necessary to study the kinematics of landslide prior to its failure for accurately estimating the time of landslide instability. Based on a spring block model, considering the Dieterich Ruina's friction, the kinematic displacement and velocity of landslide along the slip surface are analyzed under quasistatic approximation. A algebraic relationship including three parameters between the disp…
▽ More
It is necessary to study the kinematics of landslide prior to its failure for accurately estimating the time of landslide instability. Based on a spring block model, considering the Dieterich Ruina's friction, the kinematic displacement and velocity of landslide along the slip surface are analyzed under quasistatic approximation. A algebraic relationship including three parameters between the displacement (or velocity) and time is obtained, and then applied to two typical landslides: Vaiont in Italy, and Maoxian in China. The results show that the proposed spring block friction model can well describe the kinematic data of landslides before their failure. If the effective data of displacement can be obtained to determine the three parameters above, this simple physical model could be used to estimate the time of landslide instability. This spring block friction model also provides clear physical basis for the usual inverse velocity method of the landslide warning, the stick slip of some landslides, and the scaling relationship between the numbers of the landslides and their volume.
△ Less
Submitted 29 January, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Locating earthquake epicenter without a seismic velocity model
Authors:
Rong Qiang Wei
Abstract:
We present a method for locating the seismic event epicenters without assuming an Earth model of the seismic velocity structure, based on the linear relationship between $\log R$ and $\log t$ (where $R$ is the radius of spherical P wave propagated outwards from the hypocenter, $t$ is the travle-time of the P wave). This relationship is derived from the dimensional analysis and a lot of theoretical…
▽ More
We present a method for locating the seismic event epicenters without assuming an Earth model of the seismic velocity structure, based on the linear relationship between $\log R$ and $\log t$ (where $R$ is the radius of spherical P wave propagated outwards from the hypocenter, $t$ is the travle-time of the P wave). This relationship is derived from the dimensional analysis and a lot of theoretical or real seismic data, in which the earthquake can be considered to be a point source. Application to 1209 events occurred from 2014 to 2017 in the IASPEI Ground Truth (GT) reference events list shows that our method can locate the correct seismic event epicenters in a simple way. $\sim 97.2$ % of seismic epicenters are located with both longitude and latitude errors $\in[-0.1^\circ, +0.1^\circ]$. This ratio can increase if with a finer search grid. As a direct and global-search location, this method may be useful in obtaining the earthquake epicenters occurred in the areas where the seismic velocity structure is poorly known, the starting points or the constraints for other location methods.
△ Less
Submitted 11 August, 2021;
originally announced August 2021.
-
Application of minimum entropy deconvolution to detect $pP$ phase in a seismogram
Authors:
Rong Qiang Wei
Abstract:
The hypocentral depth is a key requirement in seismology and earthquake engineering, but it is very difficult to be determined. The current accepted improvement is taking advantage of the depth phases, such as the pP, to constrain this parameter. However, it is not easy to pick such a phase in a seismogram from the other phases and the backgound noises. Here we propose the use of the minimum entro…
▽ More
The hypocentral depth is a key requirement in seismology and earthquake engineering, but it is very difficult to be determined. The current accepted improvement is taking advantage of the depth phases, such as the pP, to constrain this parameter. However, it is not easy to pick such a phase in a seismogram from the other phases and the backgound noises. Here we propose the use of the minimum entropy deconvolution (MED) to detect it. Synthetic tests show that impulse(s) hidden in the seimic noises, eg. discrete unit impulses or the Gaussian mono impulses, can be detected completely. Further, we assume that the pP phase is an impulse-like signal buried in the Z component of the seismogram and applied this technique to 12 earthquakes in the International Association of Seismology and Physics (IASPEI) Ground Truth (GT) reference events list. Results show that 9 out of 12 earthquakes have absolute errors of less than 2.00 s for the travel-time differences of pP-P, and the maximum absolute error is 3.06 s . This demonstrate that the assumption above is reasonable, and this technique works well and effectively even for a single seismogram. Due to its little cost and effectiveness, this technique may be also useful in the starting points for other methods to detect pP phase.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
An exact solution to the partition function of the finite-size Ising Model
Authors:
Rong Qiang Wei
Abstract:
There is no an exact solution to three-dimensional (3D) finite-size Ising model (referred to as the Ising model hereafter for simplicity) and even two-dimensional (2D) Ising model with non-zero external field to our knowledge. Here by using an elementary but rigorous method, we obtain an exact solution to the partition function of the Ising model with $N$ lattice sites. It is a sum of $2^N$ expone…
▽ More
There is no an exact solution to three-dimensional (3D) finite-size Ising model (referred to as the Ising model hereafter for simplicity) and even two-dimensional (2D) Ising model with non-zero external field to our knowledge. Here by using an elementary but rigorous method, we obtain an exact solution to the partition function of the Ising model with $N$ lattice sites. It is a sum of $2^N$ exponential functions and holds for $D$-dimensional ($D=1,2,3,...$) Ising model with or without the external field. This solution provides a new insight into the problem of the Ising model and the related difficulties, and new understanding of the classic exact solutions for one-dimensional (1D) (Kramers and Wannier, 1941) or 2D Ising model (Onsager, 1944). With this solution, the specific heat and magnetisation of a simple 3D Ising model are calculated, which are consistent with the results from experiments and/or numerical simulations. Furthermore, the solution here and the related approaches, can also be available to other models like the percolation and/or the Potts model.
△ Less
Submitted 11 October, 2018; v1 submitted 2 May, 2018;
originally announced May 2018.
-
Heat flows inferred from a Parker's-like formula for stable or quasi-stable continents
Authors:
Rong Qiang Wei
Abstract:
Surface heat flow is a key parameter for the geothermal structure, rheology, and hence the dynamics of continents. However, the coverage of heat flow measurements is still poor in many continental areas. By transforming the stable nonlinear heat conduction equation into a Poisson's one, we develop a method to infer surface heat flow for a stable or quasi-stable continent from a Parker's-like formu…
▽ More
Surface heat flow is a key parameter for the geothermal structure, rheology, and hence the dynamics of continents. However, the coverage of heat flow measurements is still poor in many continental areas. By transforming the stable nonlinear heat conduction equation into a Poisson's one, we develop a method to infer surface heat flow for a stable or quasi-stable continent from a Parker's-like formula. This formula provides the relationship between the Fourier transform of surface heat flow and the sum of the Fourier transform of the powers of geometry for the heat production (HP) interface in the continental lithosphere. Once the interface geometry is known, one to three dimensional distribution of the surface heat flow can be calculated accurately by this formula. As a case study, we estimate the three-dimensional surface heat flows for the Ordos geological block and its adjacent areas in China on a $1^\circ \times 1^\circ$ grid based on a simple layered constant HP model. Comparing to the measurements, most relative errors of the heat flows inferred are less than 20\%, showing this method is a favorable way to estimate surface heat flow for stable or quasi-stable continental regions where measurements are rare or absent.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
A heat production model for stable continental lithosphere by the inversion of the surface heat flows
Authors:
Rong Qiang Wei
Abstract:
Obtaining the heat production (HP) in the lithosphere has always been a challenge for the geotherms and evolution of continents. By transforming the nonlinear stable heat conduction equation into a linear Poisson's potential one, we propose a method to infer the HP in the stable continental lithosphere. This method estimates the HP through the inversion of the corresponding heat flow (HF) observat…
▽ More
Obtaining the heat production (HP) in the lithosphere has always been a challenge for the geotherms and evolution of continents. By transforming the nonlinear stable heat conduction equation into a linear Poisson's potential one, we propose a method to infer the HP in the stable continental lithosphere. This method estimates the HP through the inversion of the corresponding heat flow (HF) observations. Either the distribution of HP within the lithosphere or geometry of HP interfaces (even the both) can be inverted. Herein we focus on the inversion of the geometry of the HP interface. An analogical Parker-Oldenburg formula, which is often used in the inversion of potential field, is deduced for this purpose. This analogical formula is based on a relationship between the Fourier transform of the corresponding HF observations and the sum of the Fourier transform for the powers of the interface geometry. When the mean depth of the HP interface and the HP contrast between the two media are given, one to three-dimensional geometry of the HP interface can be iteratively calculated. As a case study, we construct a HP model for the lithosphere of the Ordos geological block and its adjacent area in China, in which three-dimensional geometry of the upper crustal HP interface is estimated. It is found that the geometry of this HP interface distribute uneven in a magnitude of dozens of km. With this HP model, the geotherms for the Ordos geological block and its adjacent area is calculated further, which fit the constraints from the studies on the xenolith and tectonics well.
△ Less
Submitted 13 August, 2017;
originally announced August 2017.
-
Inferring the paleo-longitude directly from the paleo-geomagnetic data
Authors:
Rong Qiang Wei
Abstract:
It is thought that paleo-magnetism has the incapability in providing paleo-longitude. To obtain this important location parameter many other indirect methods have been developed based on different assumptions. Here we present a scanning method to derive the paleo-longitude from the usual paleo-magnetic measurements. This method takes into account the contributions to the Earth's magnetic potential…
▽ More
It is thought that paleo-magnetism has the incapability in providing paleo-longitude. To obtain this important location parameter many other indirect methods have been developed based on different assumptions. Here we present a scanning method to derive the paleo-longitude from the usual paleo-magnetic measurements. This method takes into account the contributions to the Earth's magnetic potential from additional dipoles with their axes in the equatorial plane, which were omitted by the traditional paleo-magnetism. In this method, firstly we assume that $θ_p$ and $λ_p$ are accurate (or determined well enough), and define a cost function; And secondly we minimize this function by systematically searching through all longitudes and latitudes in their domain; Finally when a local minima of this cost function reaches, the corresponding longitude is the paleo-longitude that we look for. Simultaneously the paleo-latitude is obtained. Synthetic experiments show that this method works very well when there are no errors in the geomagntic measurements (Components of magnetic field: $B_x, B_y, B_z$, or declination $D$ and inclination $I$). If there exist errors in geomagntic measurements, we recommend adding a Tikhonov regularization factor to the cost function for deriving reasonable paleo-longitude, and provide two examples. Error analysis shows that the main error sources for paleo-longitude are $B_y$ and/or $I$ in our method. In addition, such a cost function and its like could be used as a theoretical framework that can directly invert the paleo-longitude, paleo-latitude, and even the location of the paleo-geomagnetic poles simultaneously from the paleo-geomagnetic measurements through any appropriate inversion method.
△ Less
Submitted 30 November, 2020; v1 submitted 3 August, 2017;
originally announced August 2017.
-
Magnetic fields induced by a mechanical singularity in a magnetoelastic half plane and their applications to the seismicities in the crust of the Chinese continent
Authors:
Rong Qiang Wei
Abstract:
The interaction between the magnetic field and the elastic deformation field in the crust is studied in a simplified way. The magnetic fields generated by the line singularities in a magnetized elastic half-plane are investigated. Using the general solution and Fourier transform technique, the exact solutions for the generated magnetic inductions due to various cases are obtained in a closed form.…
▽ More
The interaction between the magnetic field and the elastic deformation field in the crust is studied in a simplified way. The magnetic fields generated by the line singularities in a magnetized elastic half-plane are investigated. Using the general solution and Fourier transform technique, the exact solutions for the generated magnetic inductions due to various cases are obtained in a closed form. The results show that the line concentrated force will induced a perturbed magnetic field; The induced magnetic field will indicate the line concentrated force in reverse. The distribution of the vertical component of the magnetic induction caused by the line mechanical singularities is simpler than that of the horizontal component, and it is zero at the origin when the applied magnetic field and the line concentrated force satisfies some conditions. This result is applied to locate the epicenters of the earthquakes and historical earthquakes occurred in the Chinese continental crust. Results show that more than 80\% epicenters are at or near the zero-contours of the vertical component of the magnetic induction observed from satellite. These regions of zero-contours, especially those in active tectonic zones, could be the possible seismogenic zones in the future. The zero-contours of the vertical component of the magnetic induction from satellite could be as geophysical constraints to the risk information on the shallow seismicities, or they can be used as an early monitor for the shallow seismicities in the continental crust, or an auxiliary sign in the determination of the great historical earthquake.
△ Less
Submitted 15 August, 2016;
originally announced September 2016.
