-
Shear-enhanced permeability development of magma vesiculating in cylindrical conduits
Authors:
J. Birnbaum,
J. Schauroth,
J. Weaver,
J. E. Kendrick,
A. Lamur,
Y. Lavallée
Abstract:
During magma vesiculation, permeability is established when growing bubbles begin to form connected networks, which allow fluids to percolate. This percolation threshold controls the relative rates between magma ascent and volatile exsolution, which in turn dictate eruptive style. Percolation is controlled primarily by total vesicularity and shear conditions. We performed vesiculation experiments…
▽ More
During magma vesiculation, permeability is established when growing bubbles begin to form connected networks, which allow fluids to percolate. This percolation threshold controls the relative rates between magma ascent and volatile exsolution, which in turn dictate eruptive style. Percolation is controlled primarily by total vesicularity and shear conditions. We performed vesiculation experiments on rhyolitic glass in a spatially confined, cylindrical, conduit-like geometry. The amount of shear experienced by the sample is controlled by varying the sample and confining diameters to allow for various degrees of free (isotropic) followed by confined (anisotropic) expansion. Pore anisotropy develops sub-parallel to the flow direction. We measure the total and connected porosity and permeability of the vesiculated samples. We observe two regimes of behavior for samples dominated by 1) isotropic expansion, in which the onset of percolation corresponds with the beginning of shear deformation and 2) anisotropic expansion which shows low percolation thresholds (<20%) with a near-constant permeability even with increasing porosity. We find a good correlation between connected porosity and permeability, with distinct trends for sheared and unsheared samples. The development of anisotropy in vesiculating magmas is ubiquitous in magmatic networks and our data highlight the importance of considering the in situ shear conditions when investigating the percolation threshold.
△ Less
Submitted 15 May, 2025;
originally announced May 2025.
-
Scalable Quantum Computing with Optical Links
Authors:
M. J. Weaver,
G. Arnold,
H. Weaver,
S. Gröblacher,
R. Stockill
Abstract:
Quantum computers have great potential to solve problems which are intractable on classical computers. However, quantum processors have not yet reached the required scale to run applications which outperform traditional computers. Leading hardware platforms, such as superconducting qubit based processors, will soon become bottlenecked by the physical constraints of their low temperature environmen…
▽ More
Quantum computers have great potential to solve problems which are intractable on classical computers. However, quantum processors have not yet reached the required scale to run applications which outperform traditional computers. Leading hardware platforms, such as superconducting qubit based processors, will soon become bottlenecked by the physical constraints of their low temperature environments, and the expansion of quantum computers will necessitate quantum links between multiple processor modules. Optical frequencies offer the most promising path for these links due to their resilience to noise even at ambient temperature and the maturity of classical optical networks. However, required microwave-to-optics transducers cannot operate deterministically yet, which has widely been seen as a key challenge for their integration into fault-tolerant quantum computers. In this work, we examine implementations of optical links between cryogenic units that surpass the performance of individual cryogenic modules even with the performance of existing or near-term microwave-to-optics transducers. We show methods for these transducers to provide on-demand entanglement between separated quantum processors with high fidelity and lay out key steps for adoption of the technology including scaling transducer numbers and integration with other hardware. Finally, we discuss a number of architectures comprised of these links which can drive the expansion of quantum data centers to utility scale.
△ Less
Submitted 1 May, 2025;
originally announced May 2025.
-
A Low-Temperature Tunable Microcavity featuring High Passive Stability and Microwave Integration
Authors:
Yanik Herrmann,
Julius Fischer,
Stijn Scheijen,
Cornelis F. J. Wolfs,
Julia M. Brevoord,
Colin Sauerzapf,
Leonardo G. C. Wienhoven,
Laurens J. Feije,
Martin Eschen,
Maximilian Ruf,
Matthew J. Weaver,
Ronald Hanson
Abstract:
Open microcavities offer great potential for the exploration and utilization of efficient spin-photon interfaces with Purcell-enhanced quantum emitters thanks to their large spectral and spatial tunability combined with high versatility of sample integration. However, a major challenge for this platform is the sensitivity to cavity length fluctuations in the cryogenic environment, which leads to c…
▽ More
Open microcavities offer great potential for the exploration and utilization of efficient spin-photon interfaces with Purcell-enhanced quantum emitters thanks to their large spectral and spatial tunability combined with high versatility of sample integration. However, a major challenge for this platform is the sensitivity to cavity length fluctuations in the cryogenic environment, which leads to cavity resonance frequency variations and thereby a lowered averaged Purcell enhancement. This work presents a closed-cycle cryogenic fiber-based microcavity setup, which is in particular designed for a low passive vibration level, while still providing large tunability and flexibility in fiber and sample integration, and high photon collection efficiency from the cavity mode. At temperatures below 10 Kelvin, a stability level of around 25 picometer is reproducibly achieved in different setup configurations, including the extension with microwave control for manipulating the spin of cavity-coupled quantum emitters, enabling a bright photonic interface with optically active qubits.
△ Less
Submitted 18 December, 2024; v1 submitted 3 September, 2024;
originally announced September 2024.
-
The persistence of spin coherence in a crystalline environment
Authors:
Gerald Curran III,
Zachary Rex,
Casper X. Wilson,
Luke J. Weaver,
Ivan Biaggio
Abstract:
We analyze quantum interference in the triplet-exciton pair generated by singlet exciton fission in a molecular crystal, and introduce transport-induced dephasing (TID) as a key effect that can suppress the expected fluorescence quantum beats when the triplet-exciton wavefunction can localize on inequivalent sites. TID depends on the triplet-exciton hopping rate between inequivalent sites and on t…
▽ More
We analyze quantum interference in the triplet-exciton pair generated by singlet exciton fission in a molecular crystal, and introduce transport-induced dephasing (TID) as a key effect that can suppress the expected fluorescence quantum beats when the triplet-exciton wavefunction can localize on inequivalent sites. TID depends on the triplet-exciton hopping rate between inequivalent sites and on the energy-shifts among the stationary states of the entangled triplet pair in different spatial configurations. The theoretical model is confirmed by experiments in rubrene single crystals, where triplet pairs remain entangled for more than 50 ns but quantum beats are suppressed by TID within a few nanoseconds when the magnetic field is misaligned by just a few degrees from specific symmetric directions. Our experiments deliver the zero-field parameters for the rubrene molecule in its orthorhombic lattice and information on triplet-exciton transport, in particular the triplet-exciton hopping rate between inequivalent sites, which we evaluate to be of the order of 150 ps in rubrene.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
An integrated microwave-to-optics interface for scalable quantum computing
Authors:
Matthew J. Weaver,
Pim Duivestein,
Alexandra C. Bernasconi,
Selim Scharmer,
Mathilde Lemang,
Thierry C. van Thiel,
Frederick Hijazi,
Bas Hensen,
Simon Gröblacher,
Robert Stockill
Abstract:
Microwave-to-optics transduction is emerging as a vital technology for scaling quantum computers and quantum networks. To establish useful entanglement links between qubit processing units, several key conditions have to be simultaneously met: the transducer must add less than a single quantum of input referred noise and operate with high-efficiency, as well as large bandwidth and high repetition…
▽ More
Microwave-to-optics transduction is emerging as a vital technology for scaling quantum computers and quantum networks. To establish useful entanglement links between qubit processing units, several key conditions have to be simultaneously met: the transducer must add less than a single quantum of input referred noise and operate with high-efficiency, as well as large bandwidth and high repetition rate. Here we present a new design for an integrated transducer based on a planar superconducting resonator coupled to a silicon photonic cavity through a mechanical oscillator made of lithium niobate on silicon. We experimentally demonstrate its unique performance and potential for simultaneously realizing all of the above conditions, measuring added noise that is limited to a few photons, transduction efficiencies as high as 0.9%, with a bandwidth of 14.8 MHz and a repetition rate of up to 100 kHz. Our device couples directly to a 50-Ohm transmission line and can easily be scaled to a large number of transducers on a single chip, paving the way for distributed quantum computing.
△ Less
Submitted 27 October, 2022;
originally announced October 2022.
-
Electro-Optical Sampling of Single-Cycle THz Fields with Single-Photon Detectors
Authors:
Taylor Shields,
Adetunmise C. Dada,
Lennart Hirsch,
Seungjin Yoon,
Jonathan M. R. Weaver,
Daniele Faccio,
Lucia Caspani,
Marco Peccianti,
Matteo Clerici
Abstract:
Electro-optical sampling of Terahertz fields with ultrashort pulsed probes is a well-established approach for directly measuring the electric field of THz radiation. This technique usually relies on balanced detection to record the optical phase shift brought by THz-induced birefringence. The sensitivity of electro-optical sampling is, therefore, limited by the shot noise of the probe pulse, and i…
▽ More
Electro-optical sampling of Terahertz fields with ultrashort pulsed probes is a well-established approach for directly measuring the electric field of THz radiation. This technique usually relies on balanced detection to record the optical phase shift brought by THz-induced birefringence. The sensitivity of electro-optical sampling is, therefore, limited by the shot noise of the probe pulse, and improvements could be achieved using quantum metrology approaches using, e.g., NOON states for Heisenberg-limited phase estimation. We report on our experiments on THz electro-optical sampling using single-photon detectors and a weak squeezed vacuum field as the optical probe. Our approach achieves field sensitivity limited by the probe state statistical properties using phase-locked single-photon detectors and paves the way for further studies targeting quantum-enhanced THz sensing.
△ Less
Submitted 12 December, 2022; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Digital Wire Analyzer of Mechanical Tension, Electrical Continuity, and Isolation
Authors:
Sebastien Prince,
Pratyush Anand,
James Battat,
Russell Farnsworth,
Nathan Felt,
Roxanne Guenette,
Shion Kubota,
Austin Li,
Em Murdock,
John Oliver,
Chris Stanford,
Jackson Weaver
Abstract:
A digital instrument that allows the measurement of the mechanical tension of an array of wires of known length and density, and the testing of their electrical continuity and isolation, has been developed. The instrument measures wire tension by measuring the fundamental frequency of the wire. Its working principle is to apply direct high voltages on neighboring wires of a wire under test and swe…
▽ More
A digital instrument that allows the measurement of the mechanical tension of an array of wires of known length and density, and the testing of their electrical continuity and isolation, has been developed. The instrument measures wire tension by measuring the fundamental frequency of the wire. Its working principle is to apply direct high voltages on neighboring wires of a wire under test and sweeping the frequency of an alternating high voltage that is also applied on those neighbors. A resonance is observed in the readout signal of the middle wire when the frequency of the alternating high voltage coincides with its fundamental frequency. The instrument automates the process over 128 wires, with eight read out simultaneously. An accuracy of 1% in the measurement of tension is achieved by this digital wire analyzer (DWA).
△ Less
Submitted 16 November, 2022; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Demonstration of a laser powder bed fusion combinatorial sample for high-throughput microstructure and indentation characterization
Authors:
Jordan S. Weaver,
Adam L. Pintar,
Carlos Beauchamp,
Howie Joress,
Kil-Won Moon,
Thien Q. Phan
Abstract:
High-throughput experiments that use combinatorial samples with rapid measurements can be used to provide process-structure-property information at reduced time, cost, and effort. Developing these tools and methods is essential in additive manufacturing where new process-structure-property information is required on a frequent basis as advances are made in feedstock materials, additive machines, a…
▽ More
High-throughput experiments that use combinatorial samples with rapid measurements can be used to provide process-structure-property information at reduced time, cost, and effort. Developing these tools and methods is essential in additive manufacturing where new process-structure-property information is required on a frequent basis as advances are made in feedstock materials, additive machines, and post-processing. Here we demonstrate the design and use of combinatorial samples produced on a commercial laser powder bed fusion system to study 60 distinct process conditions of nickel superalloy 625: five laser powers and four laser scan speeds in three different conditions. Combinatorial samples were characterized using optical and electron microscopy, x-ray diffraction, and indentation to estimate the porosity, grain size, crystallographic texture, secondary phase precipitation, and hardness. Indentation and porosity results were compared against a regular sample. The smaller-sized regions (3 mm x 4 mm) in the combinatorial sample have a lower hardness compared to a larger regular sample (20 mm x 20 mm) with similar porosity (< 0.03 %). Despite this difference, meaningful trends were identified with the combinatorial sample for grain size, crystallographic texture, and porosity versus laser power and scan speed as well as trends with hardness versus stress-relief condition.
△ Less
Submitted 3 August, 2021; v1 submitted 2 March, 2021;
originally announced March 2021.
-
Poroelasticity as a Model of Soft Tissue Structure: Hydraulic Permeability Inference for Magnetic Resonance Elastography in Silico
Authors:
Damian R Sowinski,
Matthew DJ McGarry,
Elijah Van Houten,
Scott Gordon-Wylie,
John Weaver,
Keith D Paulsen
Abstract:
Magnetic Resonance Elastography allows noninvasive visualization of tissue mechanical properties by measuring the displacements resulting from applied stresses, and fitting a mechanical model. Poroelasticity naturally lends itself to describing tissue -- a biphasic medium, consisting of both solid and fluid components. This article reviews the theory of poroelasticity, and shows that the spatial d…
▽ More
Magnetic Resonance Elastography allows noninvasive visualization of tissue mechanical properties by measuring the displacements resulting from applied stresses, and fitting a mechanical model. Poroelasticity naturally lends itself to describing tissue -- a biphasic medium, consisting of both solid and fluid components. This article reviews the theory of poroelasticity, and shows that the spatial distribution of hydraulic permeability, the ease with which the solid matrix permits the flow of fluid under a pressure gradient, can be faithfully reconstructed without spatial priors in simulated environments. The paper describes an in-house MRE computational platform -- a multi-mesh, finite element poroelastic solver coupled to an artificial epistemic agent capable of running Bayesian inference to reconstruct inhomogenous model mechanical property images from measured displacement fields. Building on prior work, the domain of convergence for inference is explored, showing that hydraulic permeabilities over several orders of magnitude can be reconstructed given very little prior knowledge of the true spatial distribution.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Geometric localization in supported elastic struts
Authors:
Thomas C. T. Michaels,
Remy Kusters,
Alexander J. Dear,
Cornelis Storm,
James C. Weaver,
L. Mahadevan
Abstract:
Localized deformation patterns are a common motif in morphogenesis and are increasingly finding widespread applications in materials science, for instance as memory devices. Here we describe the emergence of spatially localized deformations in a minimal mechanical system by exploring the impact of growth and shear on the conformation of a semi-flexible filament connected to a pliable shearable sub…
▽ More
Localized deformation patterns are a common motif in morphogenesis and are increasingly finding widespread applications in materials science, for instance as memory devices. Here we describe the emergence of spatially localized deformations in a minimal mechanical system by exploring the impact of growth and shear on the conformation of a semi-flexible filament connected to a pliable shearable substrate. We combine numerical simulations of a discrete rod model with theoretical analysis of the differential equations recovered in the continuum limit to quantify (in the form of scaling laws) how geometry, mechanics, and growth act together to give rise to such localized structures in this system. We find that spatially localized deformations along the filament emerge for intermediate shear modulus and increasing growth. Finally, we use experiments on a 3D printed multi-material model system to demonstrate that external control of the amount of shear and growth regulates the spatial extent of the localized strain texture.
△ Less
Submitted 11 June, 2019;
originally announced June 2019.
-
Laser-Plasma Interactions Enabled by Emerging Technologies
Authors:
J. P. Palastro,
F. Albert,
B. Albright,
T. M. Antonsen Jr.,
A. Arefiev,
J. Bates,
R. Berger,
J. Bromage,
M. Campbell,
T. Chapman,
E. Chowdhury,
A. Colaïtis,
C. Dorrer,
E. Esarey,
F. Fiúza,
N. Fisch,
R. Follett,
D. Froula,
S. Glenzer,
D. Gordon,
D. Haberberger,
B. M. Hegelich,
T. Jones,
D. Kaganovich,
K. Krushelnick
, et al. (29 additional authors not shown)
Abstract:
An overview from the past and an outlook for the future of fundamental laser-plasma interactions research enabled by emerging laser systems.
An overview from the past and an outlook for the future of fundamental laser-plasma interactions research enabled by emerging laser systems.
△ Less
Submitted 30 April, 2019;
originally announced April 2019.
-
Biophysics-based critique of the assisted discharge mechanism hypothesis
Authors:
Julie V. Stern,
Thiruvallur R. Gowrishankar,
Kyle C. Smith,
James C. Weaver
Abstract:
Cell experiments with large, short electric field pulses of opposite polarity reveal a remarkable phenomenon: Bipolar cancellation (BPC). Typical defining experiments involve quantitative observation of tracer molecule influx at times of order 100 s post pulsing. Gowrishankar et al. BBRC 2018 503:1194-1199 shows that long-lived pores and altered partitioning or hindrance due to inserted occluding…
▽ More
Cell experiments with large, short electric field pulses of opposite polarity reveal a remarkable phenomenon: Bipolar cancellation (BPC). Typical defining experiments involve quantitative observation of tracer molecule influx at times of order 100 s post pulsing. Gowrishankar et al. BBRC 2018 503:1194-1199 shows that long-lived pores and altered partitioning or hindrance due to inserted occluding molecules can account for BPC. In stark contrast, the Assisted Discharge (AD) hypothesis, Pakhomov et al. CellMol- LifeSci 2014 71(22):4431-4441; Fig. 6, only involves early times of a microsecond down to nanoseconds. Further, well established terminology for cell membrane discharge relates to membrane potential decays shortly after pulsing. Discharge is silent on molecular or ionic transport, and does not address the fact that tracer molecule uptake vs time is measure at about 100s after pulsing ceases. Our critique of AD notes that there can be an association of AD with BPC, but associations are only necessary, not sufficient. A BPC mechanism hypothesis must be shown to be causal, able to describe time-dependent molecular influx. The two hypotheses involve very different time-scales (less than a microsecond vs 100 s) and very different quantities (volts/s vs molecules/s). Unlike pore-based hypotheses the AD hypothesis lacks explicit molecular transport mechanisms, and does not address the greatly delayed measured molecular uptake. We conclude that AD is an implausible candidate for explaining BPC.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Phonon Interferometry for Measuring Quantum Decoherence
Authors:
Matthew J. Weaver,
David Newsom,
Fernando Luna,
Wolfgang Löffler,
Dirk Bouwmeester
Abstract:
Experimental observation of the decoherence of macroscopic objects is of fundamental importance to the study of quantum collapse models and the quantum to classical transition. Optomechanics is a promising field for the study of such models because of its fine control and readout of mechanical motion. Nevertheless, it is challenging to monitor a mechanical superposition state for long enough to in…
▽ More
Experimental observation of the decoherence of macroscopic objects is of fundamental importance to the study of quantum collapse models and the quantum to classical transition. Optomechanics is a promising field for the study of such models because of its fine control and readout of mechanical motion. Nevertheless, it is challenging to monitor a mechanical superposition state for long enough to investigate this transition. We present a scheme for entangling two mechanical resonators in spatial superposition states such that all quantum information is stored in the mechanical resonators. The scheme is general and applies to any optomechanical system with multiple mechanical modes. By analytic and numeric modeling, we show that the scheme is resilient to experimental imperfections such as incomplete pre-cooling, faulty postselection and inefficient optomechanical coupling. This proposed procedure overcomes limitations of previously proposed schemes that have so far hindered the study of macroscopic quantum dynamics.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
Solute transport within single pores post-pulse
Authors:
Julie V. Stern,
Thiruvallur R. Gowrishankar,
James C. Weaver
Abstract:
We present results of studying the post-pulse transport properties of single pores. Single pores exhibit active transport (drift), and not just passive transport (diffusion) at early post-pulse times. In addition, we suggest experimental design methods obtained from model parameters that would enable experimentalists to find localized regions of a few pores.
We present results of studying the post-pulse transport properties of single pores. Single pores exhibit active transport (drift), and not just passive transport (diffusion) at early post-pulse times. In addition, we suggest experimental design methods obtained from model parameters that would enable experimentalists to find localized regions of a few pores.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Electroporation dynamics for different pore lifetimes based on the standard model
Authors:
Thiruvallur R. Gowrishankar,
Julie V. Stern,
James C. Weaver
Abstract:
Standard model of electropration (EP) has long emphasized a single pore lifetime to explain post-pulse transport across cell membranes. However, pore lifetimes estimated from molecular dynamics (MD) models and and those measured from experimental data differ by several orders of magnitude. We hypothesize that a broad distribution of lifetimes may describe the post-pulse behavior. Here, we show tha…
▽ More
Standard model of electropration (EP) has long emphasized a single pore lifetime to explain post-pulse transport across cell membranes. However, pore lifetimes estimated from molecular dynamics (MD) models and and those measured from experimental data differ by several orders of magnitude. We hypothesize that a broad distribution of lifetimes may describe the post-pulse behavior. Here, we show that pore distribution, number and size of pores, show interesting behavior in different ranges of pore lifetimes. Interestingly, for large electric fields (greater than 1 kV/cm) and short pore lifetimes (approximately 100 ns), an significant loss in pore number occurs during the pulse. Given the large number of EP applications that apply such fields, this phenomenon may be crucial to post-pulse response of cell membrane to such fields.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Broad pore lifetime distributions: A fundamental concept for cell electroporation
Authors:
Julie V. Stern,
Thiruvallur R. Gowrishankar,
Kyle C. Smith,
James C. Weaver
Abstract:
We describe a concept that has the potential to change how we think about the underlying mechanisms of cell membrane electroporation (EP). Prior experimental, theoretical and modeling have emphasized a single pore lifetime as adequate for particular conditions. Here we introduce a much more complex response: The rapid creation of many types of pore structures, of which some are traditional transie…
▽ More
We describe a concept that has the potential to change how we think about the underlying mechanisms of cell membrane electroporation (EP). Prior experimental, theoretical and modeling have emphasized a single pore lifetime as adequate for particular conditions. Here we introduce a much more complex response: The rapid creation of many types of pore structures, of which some are traditional transient lipidic pores (TPs), but the great majority are complex pores (CPs) based on both lipids and other molecules or molecular segments. At the inner leaflet of the cell plasma membrane (PM) non-lipidic molecules come from the over-crowded cytoplasm. At the outer leaflet they originate from the extracellular medium and extracellular matrix. Some partially or fully insert into TPs during or shortly after TP formation, or bind to the membrane nearby. This process is complex, leading to mostly short-lived structures, with relatively few lasting for long times. We speculate that the characteristic pore lifetimes range from $\sim$100 ns to 1,000 s, based on implications from experiments. The frequency-of-occurrence probably falls off extremely rapidly with increasing lifetime, $τ_{CP}$, which implies that most are inaccessible to traditional experimental methods. It also suggests that unexpected behavior can occur early in pulsing, vanishing before post-pulse observations begin.
△ Less
Submitted 25 August, 2017;
originally announced August 2017.
-
Pore lifetimes in cell electroporation: Complex dark pores?
Authors:
James C. Weaver,
P. Thomas Vernier
Abstract:
We review some of the basic concepts and the possible pore structures associated with electroporation (EP) for times after electrical pulsing. We purposefully give only a short description of pore creation and subsequent evolution of pore populations, as these are adequately discussed in both reviews and original research reports. In contrast, post-pulse pore concepts have changed dramatically. Fo…
▽ More
We review some of the basic concepts and the possible pore structures associated with electroporation (EP) for times after electrical pulsing. We purposefully give only a short description of pore creation and subsequent evolution of pore populations, as these are adequately discussed in both reviews and original research reports. In contrast, post-pulse pore concepts have changed dramatically. For perspective we note that pores are not directly observed. Instead understanding of pores is based on inference from experiments and, increasingly, molecular dynamics (MD) simulations. In the past decade concepts for post-pulse pores have changed significantly: The idea of pure lipidic transient pores (TPs) that exist for milliseconds or longer post-pulse has become inconsistent with MD results, which support TP lifetimes of only $\sim$100 ns. A typical large TP number during cell EP pulsing is of order $10^6$. In twenty MD-based TP lifetimes (2 us total), the TP number plummets to $\sim$0.001. In short, TPs vanish 2 us after a pulse ends, and cannot account for post-pulse behavior such as large and relatively non-specific ionic and molecular transport. Instead, an early conjecture of complex pores (CPs) with both lipidic and other molecule should be taken seriously. Indeed, in the past decade several experiments provide partial support for complex pores (CPs). Presently, CPs are "dark", in the sense that while some CP functions are known, little is known about their structure(s). There may be a wide range of lifetimes and permeabilities, not yet revealed by experiments. Like cosmology's dark matter, these unseen pores present us with an outstanding problem.
△ Less
Submitted 24 August, 2017;
originally announced August 2017.
-
Deuterium retention and thermal conductivity in ion-beam displacement-damaged tungsten
Authors:
George R. Tynan,
Russell P. Doerner,
J. Barton,
R. Chen,
S. Cui,
M. Simmonds,
Y. Wang,
J. S. Weaver,
N. Mara,
S. Pathak
Abstract:
Retention of plasma-implanted D is studied in W targets damaged by a Cu ion beam at up to 0.2 dpa with sample temperatures between 300 K and 1200 K. At a D plasma ion fluence of $10^{24}/m^2$ on samples damaged to 0.2 dpa at 300 K, the retained D retention inventory is $4.6x10^{20} D/m^2$, about ~5.5 times higher than in undamaged samples. The retained inventory drops to $9x10^{19} D/m^2$ for samp…
▽ More
Retention of plasma-implanted D is studied in W targets damaged by a Cu ion beam at up to 0.2 dpa with sample temperatures between 300 K and 1200 K. At a D plasma ion fluence of $10^{24}/m^2$ on samples damaged to 0.2 dpa at 300 K, the retained D retention inventory is $4.6x10^{20} D/m^2$, about ~5.5 times higher than in undamaged samples. The retained inventory drops to $9x10^{19} D/m^2$ for samples damaged to 0.2 dpa at 1000 K, consistent with onset of vacancy annealing at a rate sufficient to overcome the elevated rate of ion beam damage; at a damage temperature of 1200 K retention is nearly equal to values seen in undamaged materials. A nano-scale technique provides thermal conductivity measurements from the Cu- ion beam displacement damaged region. We find the thermal conductivity of W damaged to 0.2 dpa at room temperature drops from the un-irradiated value of 182 +/- 3.3 W/m-K to 53 +/- 8 W/m-K.
△ Less
Submitted 25 May, 2017;
originally announced May 2017.
-
Coherent Optomechanical State Transfer between Disparate Mechanical Resonators
Authors:
Matthew J. Weaver,
Frank M. Buters,
Fernando Luna,
Hedwig J. Eerkens,
Kier Heeck,
Sven de Man,
Dirk Bouwmeester
Abstract:
Hybrid quantum systems have been developed with various mechanical, optical and microwave harmonic oscillators. The coupling produces a rich library of interactions including two mode squeezing, swapping interactions, back-action evasion and thermal control. In a multimode mechanical system, coupling resonators of different scales (both in frequency and mass) leverages the advantages of each reson…
▽ More
Hybrid quantum systems have been developed with various mechanical, optical and microwave harmonic oscillators. The coupling produces a rich library of interactions including two mode squeezing, swapping interactions, back-action evasion and thermal control. In a multimode mechanical system, coupling resonators of different scales (both in frequency and mass) leverages the advantages of each resonance. For example: a high frequency, easily manipulated resonator could be entangled with a low frequency massive object for tests of gravitational decoherence. Here we demonstrate coherent optomechanical state swapping between two spatially and frequency separated resonators with a mass ratio of 4. We find that, by using two laser beams far detuned from an optical cavity resonance, efficient state transfer is possible through a process very similar to STIRAP (Stimulated Raman Adiabatic Passage) in atomic physics. Although the demonstration is classical, the same technique can be used to generate entanglement between oscillators in the quantum regime.
△ Less
Submitted 7 April, 2017;
originally announced April 2017.
-
High-Q nested resonator in an actively stabilized optomechanical cavity
Authors:
Frank M. Buters,
Kier Heeck,
Hedwig J. Eerkens,
Matthew J. Weaver,
Fernando Luna,
Sven de Man,
Dirk Bouwmeester
Abstract:
Experiments involving micro- and nanomechanical resonators need to be carefully designed to reduce mechanical environmental noise. A small scale on-chip approach is to add an additional resonator to the system as a mechanical low-pass filter. Unfortunately, the inherent low frequency of the low-pass filter causes the system to be easily excited mechanically. Fixating the additional resonator ensur…
▽ More
Experiments involving micro- and nanomechanical resonators need to be carefully designed to reduce mechanical environmental noise. A small scale on-chip approach is to add an additional resonator to the system as a mechanical low-pass filter. Unfortunately, the inherent low frequency of the low-pass filter causes the system to be easily excited mechanically. Fixating the additional resonator ensures that the resonator itself can not be excited by the environment. This, however, negates the purpose of the low-pass filter. We solve this apparent paradox by applying active feedback to the resonator, thereby minimizing the motion with respect the front mirror of an optomechanical cavity. Not only does this method actively stabilize the cavity length, but it also retains the on-chip vibration isolation.
△ Less
Submitted 23 January, 2017; v1 submitted 16 January, 2017;
originally announced January 2017.
-
Nested Trampoline Resonators for Optomechanics
Authors:
Matthew J. Weaver,
Brian Pepper,
Fernando Luna,
Frank M. Buters,
Hedwig J. Eerkens,
Gesa Welker,
Blaise Perock,
Kier Heeck,
Sven de Man,
Dirk Bouwmeester
Abstract:
Two major challenges in the development of optomechanical devices are achieving a low mechanical and optical loss rate and vibration isolation from the environment. We address both issues by fabricating trampoline resonators made from low pressure chemical vapor deposition (LPCVD) Si$_3$N$_4$ with a distributed bragg reflector (DBR) mirror. We design a nested double resonator structure with 80 dB…
▽ More
Two major challenges in the development of optomechanical devices are achieving a low mechanical and optical loss rate and vibration isolation from the environment. We address both issues by fabricating trampoline resonators made from low pressure chemical vapor deposition (LPCVD) Si$_3$N$_4$ with a distributed bragg reflector (DBR) mirror. We design a nested double resonator structure with 80 dB of mechanical isolation from the mounting surface at the inner resonator frequency, and we demonstrate up to 45 dB of isolation at lower frequencies in agreement with the design. We reliably fabricate devices with mechanical quality factors of around 400,000 at room temperature. In addition these devices were used to form optical cavities with finesse up to 181,000 $\pm$ 1,000. These promising parameters will enable experiments in the quantum regime with macroscopic mechanical resonators.
△ Less
Submitted 6 January, 2016; v1 submitted 1 October, 2015;
originally announced October 2015.
-
Experimental exploration of the optomechanical attractor diagram and its dynamics
Authors:
Frank M. Buters,
Hedwig J. Eerkens,
Kier Heeck,
Matthew J. Weaver,
Brian Pepper,
Sven de Man,
Dirk Bouwmeester
Abstract:
We demonstrate experimental exploration of the attractor diagram of an optomechanical system where the optical forces compensate for the mechanical losses. In this case stable self-induced oscillations occur but only for specific mirror amplitudes and laser detunings. We demonstrate that we can amplify the mechanical mode to an amplitude 500 times larger than the thermal amplitude at 300K. The lac…
▽ More
We demonstrate experimental exploration of the attractor diagram of an optomechanical system where the optical forces compensate for the mechanical losses. In this case stable self-induced oscillations occur but only for specific mirror amplitudes and laser detunings. We demonstrate that we can amplify the mechanical mode to an amplitude 500 times larger than the thermal amplitude at 300K. The lack of unstable or chaotic motion allows us to manipulate our system into a non-trivial steady state and explore the dynamics of self-induced oscillations in great detail.
△ Less
Submitted 23 April, 2015;
originally announced April 2015.
-
Spectroscopic measurements of a CO2 absorption line in an open vertical path using an airborne lidar
Authors:
Anand Ramanathan,
Jianping Mao,
Graham R Allan,
Haris Riris,
Clark J Weaver,
William E Hasselbrack,
Edward V Browell,
James B Abshire
Abstract:
We use an airborne pulsed integrated path differential absorption lidar to make spectroscopic measurements of the pressure-induced line broadening and line center shift of atmospheric CO2 at the 1572.335 nm absorption line. We measure the absorption lineshape in the vertical column between the aircraft and ground. A comparison of our measured absorption lineshape to calculations based on HITRAN sh…
▽ More
We use an airborne pulsed integrated path differential absorption lidar to make spectroscopic measurements of the pressure-induced line broadening and line center shift of atmospheric CO2 at the 1572.335 nm absorption line. We measure the absorption lineshape in the vertical column between the aircraft and ground. A comparison of our measured absorption lineshape to calculations based on HITRAN shows excellent agreement with the peak optical depth accurate to within 0.3%. Additionally, we measure changes in the line center position to within 5.2 MHz of calculations, and the absorption linewidth to within 0.6% of calculations.
△ Less
Submitted 2 August, 2013;
originally announced August 2013.
-
Observed transition from Richtmyer-Meshkov jet formation through feedout oscillations to Rayleigh-Taylor instability in a laser target
Authors:
Y. Aglitskiy,
M. Karasik,
A. L. Velikovich,
V. Serlin,
J. Weaver,
T. J. Kessler,
S. P. Nikitin,
A. J. Schmitt,
S. P. Obenschain,
N. Metzler,
J. Oh
Abstract:
Experimental study of hydrodynamic perturbation evolution triggered by a laser-driven shock wave breakout at the free rippled rear surface of a plastic target is reported. At sub-megabar shock pressure, planar jets manifesting the development of the Richtmyer-Meshkov-type instability in a non-accelerated target are observed. As the shock pressure exceeds 1 Mbar, an oscillatory rippled expansion wa…
▽ More
Experimental study of hydrodynamic perturbation evolution triggered by a laser-driven shock wave breakout at the free rippled rear surface of a plastic target is reported. At sub-megabar shock pressure, planar jets manifesting the development of the Richtmyer-Meshkov-type instability in a non-accelerated target are observed. As the shock pressure exceeds 1 Mbar, an oscillatory rippled expansion wave is observed, followed by the "feedout" of the rear-surface perturbations to the ablation front and the development of the Rayleigh-Taylor instability, which breaks up the accelerated target.
△ Less
Submitted 30 July, 2012;
originally announced July 2012.
