Showing 1–12 of 12 results for author: Warrior, H V

Modeling the seasonal variability and the governing factors of Ocean Acidification over the Bay of Bengal region

Authors: A. P Joshi, H. V Warrior

Abstract: The Bay of Bengal (BoB) is a high recipient of freshwater flux from rivers and precipitation, making the region strongly stratified. The strong stratification results in a thick barrier layer formation, which inhibits vertical mixing making this region a low-productive zone. In the present study, we attempt to model the pH of the BoB region and understand the role of different governing factors su… ▽ More The Bay of Bengal (BoB) is a high recipient of freshwater flux from rivers and precipitation, making the region strongly stratified. The strong stratification results in a thick barrier layer formation, which inhibits vertical mixing making this region a low-productive zone. In the present study, we attempt to model the pH of the BoB region and understand the role of different governing factors such as sea-surface temperature (SST), sea-surface salinity (SSS), dissolved inorganic carbon (DIC), and total alkalinity (TALK) on the seasonality of sea-surface pH. We run a set of sensitivity experiments to understand the role of each of the governing factors. The results show that the SST, SSS, and DIC are the principal drivers affecting the sea-surface pH, while TALK plays a buffering role. The SST and DIC are consistently found to be opposite to each other. The pre-monsoon season (MAM) has shown to have an almost equal contribution from all the drivers. In the pre-monsoon season, the SST and DIC are balanced by TALK and SSS. The role of SSS is significantly dominant in the second half of the year. Both SST and SSS counter the role of DIC in the southwest monsoon season. The strong stratification plays an essential role in modulating the pH of the BoB region. The thickness of the barrier layer formed in the sub-surface layers positively affects the sea-surface pH. The northern BoB is found to be more alkaline than the southern BoB. Our study highlights the complexity of ocean acidification in the BoB region compared to the other part of the world ocean. △ Less

Submitted 3 June, 2022; originally announced June 2022.

Modeling the sea-surface $p$CO$_2$ of the central Bay of Bengal region using machine learning algorithms

Authors: A. P Joshi, V. Kumar, H. V Warrior

Abstract: The present study explores the capabilities of advanced machine learning algorithms in predicting the sea-surface $p$CO$_2$ in the open oceans of the Bay of Bengal (BoB). We collect the available observations (outside EEZ) from the cruise tracks and the mooring stations. Due to the paucity of data in the BoB, we attempt to predict $p$CO$_2$ based on the Sea Surface Temperature (SST) and the Sea Su… ▽ More The present study explores the capabilities of advanced machine learning algorithms in predicting the sea-surface $p$CO$_2$ in the open oceans of the Bay of Bengal (BoB). We collect the available observations (outside EEZ) from the cruise tracks and the mooring stations. Due to the paucity of data in the BoB, we attempt to predict $p$CO$_2$ based on the Sea Surface Temperature (SST) and the Sea Surface Salinity (SSS). Comparing the MLR, the ANN, and the XGBoost algorithm against a common dataset reveals that the XGBoost performs the best for predicting the sea-surface $p$CO$_2$ in the BoB. Using the satellite-derived SST and SSS, we predict the sea-surface $p$CO$_2$ using the XGBoost model and compare the same with the in-situ observations from RAMA buoy. The model performs satisfactorily, having a correlation of 0.75 and the RMSE of $\pm$ 12.23 $μ$atm. Further using this model, we emulate the monthly variations in the sea-surface $p$CO$_2$ for the central BoB between 2010-2019. Using the satellite data, we show that the central BoB is warming at a rate of 0.0175 per year, whereas the SSS decreases with a rate of -0.0088 per year. The modeled $p$CO$_2$ shows a declination at a rate of -0.4852 $μ$atm per year. We perform sensitivity experiments to find that the variations in SST and SSS contribute $\approx$ 41$\%$ and $\approx$ 37$\%$ to the declining trends of the $p$CO$_2$ for the last decade. Seasonal analysis shows that the pre-monsoon season has the highest rate of decrease of the sea-surface $p$CO$_2$. △ Less

Submitted 3 June, 2022; originally announced June 2022.

Journal ref: Ocean Modelling, 102094 (2022)

Data-driven prediction of complex flow field over an axisymmetric body of revolution using Machine Learning

Authors: J P Panda, H V Warrior

Abstract: Computationally efficient and accurate simulations of the flow over axisymmetric bodies of revolution (ABR) has been an important desideratum for engineering design. In this article the flow field over an ABR is predicted using machine learning (ML) algorithms, using trained ML models as surrogates for classical computational fluid dynamics (CFD) approaches. The flow field is approximated as funct… ▽ More Computationally efficient and accurate simulations of the flow over axisymmetric bodies of revolution (ABR) has been an important desideratum for engineering design. In this article the flow field over an ABR is predicted using machine learning (ML) algorithms, using trained ML models as surrogates for classical computational fluid dynamics (CFD) approaches. The flow field is approximated as functions of x and y coordinates of locations in the flow field and the velocity at the inlet of the computational domain. The data required for the development of the ML models were obtained from high fidelity Reynolds stress transport model (RSTM) based simulations. The optimal hyper-parameters of the trained ML models are determined using validation. The trained ML models can predict the flow field rapidly and exhibits orders of magnitude speed up over conventional CFD approaches. The predicted results of pressure, velocity and turbulence kinetic energy are compared with the baseline CFD data, it is found that the ML based surrogate model predictions are as accurate as CFD results. This investigation offers a framework for fast and accurate predictions for a flow scenario that is critically important in engineering design. △ Less

Submitted 15 November, 2021; originally announced November 2021.

Mechanics of drag reduction of an axisymmetric body of revolution with shallow dimples

Authors: J P Panda, H V Warrior

Abstract: In this article, the mechanics of drag reduction on an axisymmetric body of revolution by shallow dimples is presented by using the high-fidelity Reynolds Stress Modeling based simulations. Experimental results of drag evolution from published literature at different Reynolds numbers are used to validate the model predictions. The numerical predictions show good agreement with the experimental res… ▽ More In this article, the mechanics of drag reduction on an axisymmetric body of revolution by shallow dimples is presented by using the high-fidelity Reynolds Stress Modeling based simulations. Experimental results of drag evolution from published literature at different Reynolds numbers are used to validate the model predictions. The numerical predictions show good agreement with the experimental results. It is observed that the drag of the body is reduced by a maximum of $31\%$ with such shape modification (for the depth to diameter ratio of $7.5\%$ and coverage ratio of $52.8\%$). This arises due to the reduced level of turbulence, flow stabilization and suppression of flow separation in the boundary layer of the body. From the analysis of turbulence states in the anisotopic invariant map (AIM) for the case of the dimpled body, we show that the turbulence reaches an axisymmetric limit in the layers close to the surface of the body. There is also a reduced misalignment between the mean flow direction and principal axis of the Reynolds stress tensor, which results in such drag reduction. The dimple depth to diameter and coverage ratio are also varied to evaluate its effect on drag evolution. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Evaluation of machine learning algorithms for predictive Reynolds stress transport modeling

Authors: J. P. Panda, H. V. Warrior

Abstract: The application machine learning (ML) algorithms to turbulence modeling has shown promise over the last few years, but their application has been restricted to eddy viscosity based closure approaches. In this article we discuss rationale for the application of machine learning with high-fidelity turbulence data to develop models at the level of Reynolds stress transport modeling. Based on these ra… ▽ More The application machine learning (ML) algorithms to turbulence modeling has shown promise over the last few years, but their application has been restricted to eddy viscosity based closure approaches. In this article we discuss rationale for the application of machine learning with high-fidelity turbulence data to develop models at the level of Reynolds stress transport modeling. Based on these rationale we compare different machine learning algorithms to determine their efficacy and robustness at modeling the different transport processes in the Reynolds Stress Transport Equations. Those data driven algorithms include Random forests, gradient boosted trees and neural networks. The direct numerical simulation (DNS) data for flow in channels is used both as training and testing of the ML models. The optimal hyper-parameters of the ML algorithms are determined using Bayesian optimization. The efficacy of above mentioned algorithms is assessed in the modeling and prediction of the terms in the Reynolds stress transport equations. It was observed that all the three algorithms predict the turbulence parameters with acceptable level of accuracy. These ML models are then applied for prediction of the pressure strain correlation of flow cases that are different from the flows used for training, to assess their robustness and generalizability. This explores the assertion that ML based data driven turbulence models can overcome the modeling limitations associated with the traditional turbulence models and ML models trained with large amounts data with different classes of flows can predict flow field with reasonable accuracy for unknown flows with similar flow physics. In addition to this verification we carry out validation for the final ML models by assessing the importance of different input features for prediction. △ Less

Submitted 28 May, 2021; originally announced May 2021.

The hydrodynamic characteristics of Autonomous Underwater Vehicles in rotating flow fields

Authors: A. Mitra, J. P. Panda, H. V. Warrior

Abstract: In this article, the hydrodynamic characteristics of Autonomous Underwater Vehicles (AUVs) are investigated and analyzed under the influence of rotating flow fields, that were generated in a recirculating water tank via a rotating propeller. Initially, experiments were carried out for the measurement of flow field variables and Quantities of Interest across the AUV in the presence of the rotating… ▽ More In this article, the hydrodynamic characteristics of Autonomous Underwater Vehicles (AUVs) are investigated and analyzed under the influence of rotating flow fields, that were generated in a recirculating water tank via a rotating propeller. Initially, experiments were carried out for the measurement of flow field variables and Quantities of Interest across the AUV in the presence of the rotating propeller while varying the rotational speed and the extent of rotational flow strength. The flow field across the AUV was measured using an Acoustic Doppler Velocimeter (ADV). These measured turbulent flow statistics were used to validate the Reynolds Stress Model (RSM) based numerical predictions in a commercial CFD solver. After preliminary validation of the turbulent flow statistics with the numerical predictions, a series of numerical simulations were performed to investigate the effect of the rotational flow field of the propeller on the drag, skin friction and pressure coefficients of the AUV. The operating speed and location of the propeller were also varied to check their affects on the hydrodynamic performance of AUV. The results provided in this article will be useful for the design optimization of AUVs cruising in shallow water where the flow is highly rotational because of wave-current interactions. Additionally the results and analysis are relevant to study the design and operation of AUVs that have to operate in a group of unmanned underwater vehicles or near submarines and ships where the flow field is highly complex and such rotational effects are present. △ Less

Submitted 28 April, 2021; v1 submitted 27 April, 2021; originally announced April 2021.

Modelling the Pressure Strain Correlation in turbulent flows using Deep Neural Networks

Authors: J P Panda, H V Warrior

Abstract: The pressure strain correlation plays a critical role in the Reynolds stress transport modelling. Accurate modelling of the pressure strain correlation leads to proper prediction of turbulence stresses and subsequently the other terms of engineering interest. However, classical pressure strain correlation models are often unreliable for complex turbulent flows. Machine learning based models have s… ▽ More The pressure strain correlation plays a critical role in the Reynolds stress transport modelling. Accurate modelling of the pressure strain correlation leads to proper prediction of turbulence stresses and subsequently the other terms of engineering interest. However, classical pressure strain correlation models are often unreliable for complex turbulent flows. Machine learning based models have shown promise in turbulence modeling but their application has been largely restricted to eddy viscosity based models. In this article, we outline a rationale for the preferential application of machine learning and turbulence data to develop models at the level of Reynolds stress modeling. As the illustration We develop data driven models for the pressure strain correlation for turbulent channel flow using neural networks. The input features of the neural networks are chosen using physics based rationale. The networks are trained with the high resolution DNS data of turbulent channel flow at different friction Reynolds numbers. The testing of the models are performed for unknown flow statistics at other friction Reynolds numbers and also for turbulent plane Couette flows. Based on the results presented in this article, the proposed machine learning framework exhibits considerable promise and may be utilized for the development of accurate Reynolds stress models for flow prediction. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Experimental and numerical investigation of the hydrodynamic characteristics of Autonomous Underwater Vehicles over sea-beds with complex topography

Authors: A. Mitra, J. P. Panda, H. V. Warrior

Abstract: Improved designs for Autonomous Underwater Vehicles (AUV) are becoming increasingly important due to their utility in academic and industrial applications. However, a majority of such testing and design is carried out under conditions that may not reflect the operating environment of shallow water AUVs. This may lead to imprecise estimations of the AUV's performance and sub-optimal designs. This a… ▽ More Improved designs for Autonomous Underwater Vehicles (AUV) are becoming increasingly important due to their utility in academic and industrial applications. However, a majority of such testing and design is carried out under conditions that may not reflect the operating environment of shallow water AUVs. This may lead to imprecise estimations of the AUV's performance and sub-optimal designs. This article presents experimental and numerical studies carried out in conjunction, to investigate the hydrodynamic characteristics of AUV hulls at different Reynolds numbers over sloped channel-beds. We carry out experiments to measure the velocity field and turbulent statistics around the AUV with quantified uncertainty. These are contrasted against corresponding flat bed experiments to gauge the effect of test bed topography on AUV performance. The experimental data was used to validate Reynolds Stress Model predictions. Hydrodynamic parameters such as drag, pressure and skin friction coefficients were predicted from the RSM simulations at different test bed slopes, angles of attack and drift angles of the AUV hull, to analyze the hydrodynamic performance of the AUV. The results presented in this article offer avenues for design improvement of AUVs operating in shallow environments, such as the continental slope and estuaries. △ Less

Submitted 28 April, 2019; originally announced April 2019.

Comments: arXiv admin note: substantial text overlap with arXiv:1809.05280

The effects of free stream turbulence on the hydrodynamic characteristics of an AUV hull form

Authors: A. Mitra, J. P. Panda, H. V. Warrior

Abstract: This article presents experimental and numerical studies on the effect of free stream turbulence on evolution of flow over an autonomous underwater vehicle (AUV) hull form at three Reynolds numbers with different submergence depths and angles of attack. The experiments were conducted in a recirculating water tank and the instantaneous velocity profiles were recorded along the AUV using Acoustic Do… ▽ More This article presents experimental and numerical studies on the effect of free stream turbulence on evolution of flow over an autonomous underwater vehicle (AUV) hull form at three Reynolds numbers with different submergence depths and angles of attack. The experiments were conducted in a recirculating water tank and the instantaneous velocity profiles were recorded along the AUV using Acoustic Doppler Velocimetry (ADV). The experimental results of stream-wise mean velocity, turbulent kinetic energy(TKE) and Reynolds stresses were used to validate the predictive capability of a Reynolds stress model (RSM) with the wall reflection term of the pressure strain correlation. From the high fidelity RSM based simulations it is observed that in presence of free stream turbulence, the pressure, skin friction, drag and lift coefficients decrease on the AUV hull. The variation of the hydrodynamic coefficients were also plotted along the AUV hull for different values of submergence depth and angle of attack with different levels of free stream turbulence. The conclusions from this experimental and numerical investigation give guidance for improved design paradigms for the design of AUVs. △ Less

Submitted 14 September, 2018; originally announced September 2018.

Experimental and numerical analysis of grid generated turbulence with and without mean strain

Authors: J. P. Panda, A. Mitra, A. P. Joshi, H. V. Warrior

Abstract: This paper presents experimental and numerical analysis of grid generated turbulence with and without the effects of applied mean strain. We conduct a series of experiments on decaying grid generated turbulence and grid turbulence with mean strain. Experimental data of turbulence statistics including Reynolds stress anisotropies is collected, analyzed and then compared to the predictions of Reynol… ▽ More This paper presents experimental and numerical analysis of grid generated turbulence with and without the effects of applied mean strain. We conduct a series of experiments on decaying grid generated turbulence and grid turbulence with mean strain. Experimental data of turbulence statistics including Reynolds stress anisotropies is collected, analyzed and then compared to the predictions of Reynolds Stress Models to assess their accuracy. The experimental data is used to evaluate the variability in the coefficients of the rate of dissipation model and the pressure strain correlation models used in Reynolds Stress Modeling. For both models we recommend optimal values of coefficients that should be used for experimental studies of grid generated turbulence. △ Less

Submitted 15 March, 2018; originally announced March 2018.

Journal ref: Experimental Thermal and Fluid Science, Volume 98, November 2018, Pages 594-603

Pressure strain correlation modeling for turbulent flows

Authors: J. P. Panda, H. V. Warrior

Abstract: Almost all investigations of turbulent flows in academia and in the industry utilize some degree of turbulence modeling. Of the available approaches to turbulence modeling Reynolds Stress Models have the highest potential to replicate complex flow phenomena. Due to its complexity and its importance in flow evolution modeling of the pressure strain correlation mechanism is generally regarded as the… ▽ More Almost all investigations of turbulent flows in academia and in the industry utilize some degree of turbulence modeling. Of the available approaches to turbulence modeling Reynolds Stress Models have the highest potential to replicate complex flow phenomena. Due to its complexity and its importance in flow evolution modeling of the pressure strain correlation mechanism is generally regarded as the key challenge for Reynolds Stress Models. In the present work, the modeling of the pressure strain correlation for complex turbulent flows is reviewed. Starting from the governing equations we outline the theory behind models for both the slow and rapid pressure strain correlation. Established models for both these are introduced and their successes and shortcomings are illustrated using simulations and comparisons to experimental and numerical studies. Recent advances and developments in this context are presented. Finally, challenges and hurdles for pressure strain correlation modeling are outlined and explained in detail to guide future investigations. △ Less

Submitted 6 March, 2018; originally announced March 2018.

A pressure strain correlation model employing extended tensor bases

Authors: J. P. Panda, H. V. Warrior

Abstract: Accurate and robust models for the pressure strain correlation are an essential component for the success of Reynolds Stress Models in turbulent flow simulations. However replicating the non-local action of pressure using only local tensors places a large limitation on potential model performance. In this paper we outline an approach that extends the tensor basis used for pressure strain correlati… ▽ More Accurate and robust models for the pressure strain correlation are an essential component for the success of Reynolds Stress Models in turbulent flow simulations. However replicating the non-local action of pressure using only local tensors places a large limitation on potential model performance. In this paper we outline an approach that extends the tensor basis used for pressure strain correlation modeling to formulate models with improved precision and robustness. This set of additional tensors is analyzed and justified based on physics based arguments and analysis of simulation data. Using these tensors models for the rapid and slow pressure strain correlation are developed. The resulting complete pressure strain correlation model is tested for a wide variety of turbulent flows, while being contrasted against the predictions of established models. It is shown that the new model provides significant improvement in prediction accuracy. △ Less

Submitted 21 December, 2017; originally announced December 2017.