Showing 1–38 of 38 results for author: Wan, J

Compressive Fourier-Domain Intensity Coupling (C-FOCUS) enables near-millimeter deep imaging in the intact mouse brain in vivo

Authors: Renzhi He, Yucheng Li, Brianna Urbina, Jiandi Wan, Yi Xue

Abstract: Two-photon microscopy is a powerful tool for in vivo imaging, but its imaging depth is typically limited to a few hundred microns due to tissue scattering, even with existing scattering correction techniques. Moreover, most active scattering correction methods are restricted to small regions by the optical memory effect. Here, we introduce compressive Fourier-domain intensity coupling for scatteri… ▽ More Two-photon microscopy is a powerful tool for in vivo imaging, but its imaging depth is typically limited to a few hundred microns due to tissue scattering, even with existing scattering correction techniques. Moreover, most active scattering correction methods are restricted to small regions by the optical memory effect. Here, we introduce compressive Fourier-domain intensity coupling for scattering correction (C-FOCUS), an active scattering correction approach that integrates Fourier-domain intensity modulation with compressive sensing for two-photon microscopy. Using C-FOCUS, we demonstrate high-resolution imaging of YFP-labeled neurons and FITC-labeled blood vessels at depths exceeding 900 um in the intact mouse brain in vivo. Furthermore, we achieve transcranial imaging of YFP-labeled dendritic structures through the intact adult mouse skull. C-FOCUS enables high-contrast fluorescence imaging at depths previously inaccessible using two-photon microscopy with 1035 nm excitation, enhancing fluorescence intensity by over 20-fold compared to uncorrected imaging. C-FOCUS provides a broadly applicable strategy for rapid, deep-tissue optical imaging in vivo. △ Less

Submitted 27 May, 2025; originally announced May 2025.

Physics-informed Transformer Model for the Design of Wavelength-filtering Ring Resonator

Authors: Yu Dian Lim, Feng Shuo Wan, Ren Jie Wan, Chuan Seng Tan

Abstract: We have developed a physics-informed transformer model to suggest design parameters in wavelength-filtering ring resonator, that suit a given pair of resonant wavelengths with <6 nm errors. The model provides a versatile method for rapid and accurate design of resonators corresponding to various resonant wavelengths. We have developed a physics-informed transformer model to suggest design parameters in wavelength-filtering ring resonator, that suit a given pair of resonant wavelengths with <6 nm errors. The model provides a versatile method for rapid and accurate design of resonators corresponding to various resonant wavelengths. △ Less

Submitted 23 April, 2025; originally announced April 2025.

JuTrack: a Julia package for auto-differentiable accelerator modeling and particle tracking

Authors: Jinyu Wan, Helena Alamprese, Christian Ratcliff, Ji Qiang, Yue Hao

Abstract: Efficient accelerator modeling and particle tracking are key for the design and configuration of modern particle accelerators. In this work, we present JuTrack, a nested accelerator modeling package developed in the Julia programming language and enhanced with compiler-level automatic differentiation (AD). With the aid of AD, JuTrack enables rapid derivative calculations in accelerator modeling, f… ▽ More Efficient accelerator modeling and particle tracking are key for the design and configuration of modern particle accelerators. In this work, we present JuTrack, a nested accelerator modeling package developed in the Julia programming language and enhanced with compiler-level automatic differentiation (AD). With the aid of AD, JuTrack enables rapid derivative calculations in accelerator modeling, facilitating sensitivity analyses and optimization tasks. We demonstrate the effectiveness of AD-derived derivatives through several practical applications, including sensitivity analysis of space-charge-induced emittance growth, nonlinear beam dynamics analysis for a synchrotron light source, and lattice parameter tuning of the future Electron-Ion Collider (EIC). Through the incorporation of automatic differentiation, this package opens up new possibilities for accelerator physicists in beam physics studies and accelerator design optimization. △ Less

Submitted 24 December, 2024; v1 submitted 30 September, 2024; originally announced September 2024.

Modular Study of a Force-Magnetic Coupling System

Authors: Zifeng Li, Yuanmei Li, Yinlong Wang, Biao You, Jianguo Wan

Abstract: A magnetic-mechanical oscillating system consists of two identical leaf springs, a non-magnetic base, and some magnets. The leaf springs are fixed at the bottom to the non-magnetic base, while the magnet is attached to the top of the leaf springs. This paper investigates the overall motion characteristics of the magnetic-mechanical oscillating system. Adopting the modular modeling concept, we simp… ▽ More A magnetic-mechanical oscillating system consists of two identical leaf springs, a non-magnetic base, and some magnets. The leaf springs are fixed at the bottom to the non-magnetic base, while the magnet is attached to the top of the leaf springs. This paper investigates the overall motion characteristics of the magnetic-mechanical oscillating system. Adopting the modular modeling concept, we simplify the system into three inter-coupled modules: the leaf springs, magnetic interactions, and the system's dissipation process. We conduct physical modeling and theoretical analysis on these modules and derived the system's dynamic equations. The research indicates that the system is a normal mode system with two degrees of freedom. In addition, we alter parameters and conduct multiple innovative experiments, obtaining intuitive vibration images that characterize the vibration modes and the periodic energy transfer. Furthermore, we employ the simulation software COMSOL Multiphysics simulation to substitute the theory for auxiliary validation, achieving a comprehensive research loop of theory-experiment-simulation. The experimental results show good consistency with the theoretical calculations and simulation results. This research provides a good teaching case for magnetic-coupling complex systems. This modular analysis and rather practical experimental design could solve the previous difficulty that the solution to such problem is too complex, and is conducive to the implementation of education. △ Less

Submitted 6 September, 2024; originally announced September 2024.

Targeted marine cloud brightening can dampen El Niño

Authors: Jessica S. Wan, John T. Fasullo, Nan Rosenbloom, Chih-Chieh Jack Chen, Katharine Ricke

Abstract: Many record-breaking climate extremes arise from both greenhouse gas-induced warming and natural climate variability. Marine cloud brightening, a solar geoengineering strategy originally proposed to reduce long-term warming, could potentially mitigate extreme events by instead targeting seasonal phenomena, such as El Niño-Southern Oscillation (ENSO). By exploiting the 2019-2020 Australian wildfire… ▽ More Many record-breaking climate extremes arise from both greenhouse gas-induced warming and natural climate variability. Marine cloud brightening, a solar geoengineering strategy originally proposed to reduce long-term warming, could potentially mitigate extreme events by instead targeting seasonal phenomena, such as El Niño-Southern Oscillation (ENSO). By exploiting the 2019-2020 Australian wildfire experiment-of-opportunity, we show that simulated marine cloud brightening in the southeast Pacific reproduces observed cloud changes and induces La Niña-like responses. We then explore how cloud brightening timing and duration modifies the 1997-1998 and 2015-2016 El Niño events. We find the earliest and longest interventions effectively restore neutral ENSO conditions and dampen El Niño's impacts. Solar geoengineering that targets climate variability could complement tools such as ENSO forecasting and provide a pathway for climate risk mitigation. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Electrically controlled nonvolatile switching of single-atom magnetism in a Dy@C84 single-molecule transistor

Authors: Feng Wang, Wangqiang Shen, Yuan Shui, Jun Chen, Huaiqiang Wang, Rui Wang, Yuyuan Qin, Xuefeng Wang, Jianguo Wan, Minhao Zhang, Xing Lu, Tao Yang, Fengqi Song

Abstract: Single-atom magnetism switching is a key technique towards the ultimate data storage density of computer hard disks and has been conceptually realized by leveraging the spin bistability of a magnetic atom under a scanning tunnelling microscope. However, it has rarely been applied to solid-state transistors, an advancement that would be highly desirable for enabling various applications. Here, we d… ▽ More Single-atom magnetism switching is a key technique towards the ultimate data storage density of computer hard disks and has been conceptually realized by leveraging the spin bistability of a magnetic atom under a scanning tunnelling microscope. However, it has rarely been applied to solid-state transistors, an advancement that would be highly desirable for enabling various applications. Here, we demonstrate realization of the electrically controlled Zeeman effect in Dy@C84 single-molecule transistors, thus revealing a transition in the magnetic moment from 3.8 μB to 5.1 μB for the ground-state GN at an electric field strength of 3-10 MV/cm. The consequent magnetoresistance significantly increases from 600% to 1100% at the resonant tunneling point. Density functional theory calculations further corroborate our realization of nonvolatile switching of single-atom magnetism, and the switching stability emanates from an energy barrier of 92 meV for atomic relaxation. These results highlight the potential of using endohedral metallofullerenes for high-temperature, high-stability, high-speed, and compact single-atom magnetic data storage. △ Less

Submitted 17 March, 2024; originally announced March 2024.

Comments: 26 pages, 4 figures

Journal ref: Nature Communications (2024)

Time-Delayed Koopman Network-Based Model Predictive Control for the FRIB RFQ

Authors: Jinyu Wan, Shen Zhao, Wei Chang, Yue Hao

Abstract: The radio-frequency quadrupole (RFQ) at the Facility for Rare Isotope Beams (FRIB) is a critical device to accelerate heavy ion beams from 12 keV/u to 0.5 MeV/u for state-of-the-art nuclear physics experiments. Efficient control of the RFQ resonance frequency detuning still remains a challenge because the temperature-sensitive frequency is solely control by a cooling water system, exhibiting compl… ▽ More The radio-frequency quadrupole (RFQ) at the Facility for Rare Isotope Beams (FRIB) is a critical device to accelerate heavy ion beams from 12 keV/u to 0.5 MeV/u for state-of-the-art nuclear physics experiments. Efficient control of the RFQ resonance frequency detuning still remains a challenge because the temperature-sensitive frequency is solely control by a cooling water system, exhibiting complicated transport delay and nonlinearity in the heat transfer processes. In this work, we propose a long-short term memory (LSTM)-based Koopman network model that can simultaneously learn the time-delayed and non-delayed correlations hidden in the historical operating data. It is proven that the model can effectively predict the behavior of the RFQ resonance frequency using historical data as inputs. With this model, a model predictive control (MPC) framework based on the Newton-Raphson method is proposed and tested. We demonstrate that the MPC framework utilizing deep learning model is able to provide precise and rapid control for the RFQ frequency detuning, reducing the control time by half compared to the proportional-integral-derivative (PID) controller. △ Less

Submitted 30 September, 2024; v1 submitted 19 January, 2024; originally announced January 2024.

Flattened photon beams, an obsolete feature in modern linear accelerators

Authors: E. Ishmael Parsai, Elahheh Salari, Diana Shvydka, Jui Wan

Abstract: Background: With the advent of Intensity Modulated Radiotherapy (IMRT) and recently, Volumetric Modulated Arc Therapy (VMAT), treatment planning using Flattening Filter Free (FFF) beams can meet all of the energy requirements in radiation therapy clinics. Manufacturers of linear accelerators no longer need to install a flattening filter (FF) in gantry head. This study aims to provide evidence of t… ▽ More Background: With the advent of Intensity Modulated Radiotherapy (IMRT) and recently, Volumetric Modulated Arc Therapy (VMAT), treatment planning using Flattening Filter Free (FFF) beams can meet all of the energy requirements in radiation therapy clinics. Manufacturers of linear accelerators no longer need to install a flattening filter (FF) in gantry head. This study aims to provide evidence of the superiority of FFF to FF through both dosimetric measurements and clinical treatment plans. Materials and Methods: A 50x50x50cm3 water phantom was created in the RayStation treatment planning system (TPS) for dosimetry comparisons. Flat beam profiles were generated using FFF beam through an optimization process for 10x10 to 30x30cm2 field sizes. Next, a comparison of treatment plans was made using 21 Head and Neck and 14 Lung/Mediastinum treatment sites using 6MV and 6MV-FFF beams. Results: Using FFF beams, profiles with flatness and symmetry identical to or better than those of the flattened beams were produced. At the very edge of the optimized plans for FFF beams, horns had the highest gamma index deviation <1.5% of the normalized dose. For clinical plans evaluated, most of the mean doses to organs_atrisk (OAR) volumes receiving 5% to 30% of the prescription dose were reduced with FFF beams. Conclusion: These results indicate the feasibility of delivering flat beams with FFF quality and producing treatment plans with equal or higher qualities in PTV coverage while achieving better sparing of OAR which will allow escalation of target dose if desired. Plus, removing FF will simplify the gantry head and reduces quality assurance and machine maintenance efforts. △ Less

Submitted 9 September, 2023; originally announced September 2023.

Comments: 6 pages, 10 Figures, 2 Tables. International Journal of Radiation Research, October 2022

Molecular modeling of interfacial properties of the hydrogen+water+decane mixture in three-phase equilibrium

Authors: Yafan Yang, Jingyu Wan, Jingfa Li, Guangsi Zhao, Xiangyu Shang

Abstract: The understanding of geochemical interactions between H2 and geofluids is of great importance for underground H2 storage but requires further study. We report the first investigation on the three-phase fluid mixture containing H2, H2O, and n-C10H22. Molecular dynamics simulation and PC-SAFT density gradient theory are employed to estimate the interfacial properties under various conditions (temper… ▽ More The understanding of geochemical interactions between H2 and geofluids is of great importance for underground H2 storage but requires further study. We report the first investigation on the three-phase fluid mixture containing H2, H2O, and n-C10H22. Molecular dynamics simulation and PC-SAFT density gradient theory are employed to estimate the interfacial properties under various conditions (temperature ranges from 298 to 373 K and pressure is up to around 100 MPa). Our results demonstrate that interfacial tensions (IFTs) of the H2-H2O interface in the H2+H2O+C10H22 three-phase mixture are smaller than IFTs in the H2+H2O two-phase mixture. This decrement of IFT can be attributed to C10H22 adsorption in the interface. Importantly, H2 accumulates in the H2O-C10H22 interface in the three-phase systems, which leads to weaker increments of IFT with increasing pressure compared to IFTs in the water+C10H22 two-phase mixture. In addition, the IFTs of the H2-C10H22 interface are hardly influenced by H2O due to the limited amount of H2O dissolved in bulk phases. Nevertheless, relatively strong enrichments and positive surface excesses of H2O are seen in the H2-C10H22 interfacial region. Furthermore, the values of the spreading coefficient are mostly negative revealing the presence of the three-phase contact for the H2+H2O+C10H22 mixture under studied conditions. △ Less

Submitted 28 July, 2023; originally announced July 2023.

Fano Interference in a Single-Molecule Junction

Authors: Yiping Ouyang, Rui Wang, Deping Guo, Yang-Yang Ju, Danfeng Pan, Xuecou Tu, Lin Kang, Jian Chen, Peiheng Wu, Xuefeng Wang, Jianguo Wan, Minhao Zhang, Wei Ji, Yuan-Zhi Tan, Su-Yuan Xie, Fengqi Song

Abstract: Trends of miniaturized devices and quantum interference electronics lead to the long desire of Fano interference in single-molecule junctions, here, which is successfully demonstrated using the 2,7-di(4-pyridyl)-9,9'-spirobifluorene molecule with a long backbone group and a short side group. Experimentally, the two electrically coupled groups are found to contribute to two blurred degenerate point… ▽ More Trends of miniaturized devices and quantum interference electronics lead to the long desire of Fano interference in single-molecule junctions, here, which is successfully demonstrated using the 2,7-di(4-pyridyl)-9,9'-spirobifluorene molecule with a long backbone group and a short side group. Experimentally, the two electrically coupled groups are found to contribute to two blurred degenerate points in the differential conductance mapping. This forms a characteristic non-centrosymmetric double-crossing feature, with distinct temperature response for each crossing. Theoretically, we describe the practical in-junction electron transmission using a new two-tunnelling-channel coupling model and obtain a working formula with a Fano term and a Breit-Wigner term. The formula is shown to provide a good fit for all the mapping data and their temperature dependence in three dimensions, identifying the Fano component. Our work thus forms a complete set of evidence of the Fano interference in a single-molecule junction induced by two-tunnelling-channel coupling transport. Density functional theory calculations are used to corroborate this new physics. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Comments: 13 pages (main text), 4000 Words (main text), 5 figures

Buckling behavior of tenary one-dimensional van der Waals heterostructures

Authors: Jing Wan, Shu Lin

Abstract: 1D van der Waals heterostructures (1D vdWH) were recently reported to be successfully synthesized. We perform molecular dynamics simulations to investigate the buckling behavior of a 1D vdWH composed of inner carbon nanotube, a middle boron nitride nanotube and an outer molybdenum disulfide nanotube. We find that as the temperature increases, the 1D vdWH gradully loses its stability and the peak v… ▽ More 1D van der Waals heterostructures (1D vdWH) were recently reported to be successfully synthesized. We perform molecular dynamics simulations to investigate the buckling behavior of a 1D vdWH composed of inner carbon nanotube, a middle boron nitride nanotube and an outer molybdenum disulfide nanotube. We find that as the temperature increases, the 1D vdWH gradully loses its stability and the peak value of compressive stress decreases. Slenderness ratio have a slight influence on the strength and stability of 1D vdWH under axial compression. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Quasi one-dimensional diffuse laser cooling of atoms

Authors: Jin-Yin Wan, Xin Wang, Xiao Zhang, Yan-Ling Meng, Wen-Li Wang, Yuan Sun, Liang Liu

Abstract: We demonstrate experimentally the generation of one-dimensional cold gases of $^{87}$Rb atoms by diffuse laser cooling (DLC). A horizontal slender vacuum glass tube with length of 105~cm and diameter of 2~cm is used in our experiment. The diffuse laser light inside the tube, which is generated by multi-reflection of injected lasers, cools the background vapor atoms. With 250~mW of cooling light an… ▽ More We demonstrate experimentally the generation of one-dimensional cold gases of $^{87}$Rb atoms by diffuse laser cooling (DLC). A horizontal slender vacuum glass tube with length of 105~cm and diameter of 2~cm is used in our experiment. The diffuse laser light inside the tube, which is generated by multi-reflection of injected lasers, cools the background vapor atoms. With 250~mW of cooling light and 50~mW of repumping light, an evenly distributed meter-long profile of atom cloud is obtained. We observe a factor 4 improvement on the atomic OD for a typical cooling duration of 170~ms and a sub-Doppler atomic temperature of 25~$μ$k. The maximum number of detected cold atoms remain constant for a free-fall duration of 30~ms. Such samples are ideal for many quantum optical experiments involving electromagnetically induced transparency, electronically highly excited (Rydberg) atoms and quantum precision measurements. △ Less

Submitted 29 November, 2021; v1 submitted 28 November, 2021; originally announced November 2021.

Comments: 5 pages, 4 figures, 22 references

Correlation Improves Group Testing: Modeling Concentration-Dependent Test Errors

Authors: Jiayue Wan, Yujia Zhang, Peter I. Frazier

Abstract: Population-wide screening is a powerful tool for controlling infectious diseases. Group testing enables such screening despite limited resources. Viral concentration of pooled samples are often positively correlated, either because prevalence and sample collection are influenced by location, or through intentional enhancement via pooling samples according to risk/household. Such correlation is kno… ▽ More Population-wide screening is a powerful tool for controlling infectious diseases. Group testing enables such screening despite limited resources. Viral concentration of pooled samples are often positively correlated, either because prevalence and sample collection are influenced by location, or through intentional enhancement via pooling samples according to risk/household. Such correlation is known to improve efficiency under fixed test sensitivity. However, in reality, a test's sensitivity depends on the concentration of the analyte (e.g., viral RNA), as in the so-called dilution effect, where sensitivity decreases for larger pools. We show that concentration-dependent test error alters correlation's effect under the most widely-used group testing procedure, the two-stage Dorfman procedure. We prove that when test sensitivity increases with concentration, pooling correlated samples together (correlated pooling) achieves asymptotically higher sensitivity than independently pooling the samples (naive pooling). In contrast, in the concentration-independent case, correlation does not affect sensitivity. Moreover, with concentration-dependent errors, correlation can degrade test efficiency compared to naive pooling whereas under concentration-independent errors, correlation always improves efficiency. We propose an alternative measure of test resource usage, the number of positives found per test consumed, which we argue is better aligned with infection control, and show that correlated pooling outperforms naive pooling on this measure. In simulation, we show that the effect of correlation under realistic concentration-dependent test error meaningfully differs from correlation's effect assuming fixed sensitivity. Our findings underscore the importance for policy-makers of using models that incorporate naturally-occurring correlation and of considering ways of strengthening this correlation. △ Less

Submitted 30 March, 2025; v1 submitted 14 November, 2021; originally announced November 2021.

Comments: 76 pages, 15 figures, 15 tables

Machine learning enabled fast evaluation of dynamic aperture for storage ring accelerators

Authors: Jinyu Wan, Yi Jiao

Abstract: For any storage ring-based large-scale scientific facility, one of the most important performance parameters is the dynamic aperture (DA), which measures the motion stability of charged particles in a global manner. To date, long-term tracking-based simulation is regarded as the most reliable method to calculate DA. However, numerical tracking may become a significant issue, especially when lots o… ▽ More For any storage ring-based large-scale scientific facility, one of the most important performance parameters is the dynamic aperture (DA), which measures the motion stability of charged particles in a global manner. To date, long-term tracking-based simulation is regarded as the most reliable method to calculate DA. However, numerical tracking may become a significant issue, especially when lots of candidate designs of a storage ring need to be evaluated. In this paper, we present a novel machine learning-based method, which can reduce the computation cost of DA tracking by approximately one order of magnitude, while keeping sufficiently high evaluation accuracy. Moreover, we demonstrate that this method is independent of concrete physical models of a storage ring. This method has the potential to be applied to similar problems of identifying irregular motions in other complex dynamical systems. △ Less

Submitted 22 October, 2021; v1 submitted 5 July, 2021; originally announced July 2021.

Data-driven Chaos Indicator for Nonlinear Dynamics and Applications on Storage Ring Lattice Design

Authors: Yongjun Li, Jinyu Wan, Allen Liu, Yi Jiao, Robert Rainer

Abstract: A data-driven chaos indicator concept is introduced to characterize the degree of chaos for nonlinear dynamical systems. The indicator is represented by the prediction accuracy of surrogate models established purely from data. It provides a metric for the predictability of nonlinear motions in a given system. When using the indicator to implement a tune-scan for a quadratic Henon map, the main res… ▽ More A data-driven chaos indicator concept is introduced to characterize the degree of chaos for nonlinear dynamical systems. The indicator is represented by the prediction accuracy of surrogate models established purely from data. It provides a metric for the predictability of nonlinear motions in a given system. When using the indicator to implement a tune-scan for a quadratic Henon map, the main resonances and their asymmetric stop-band widths can be identified. When applied to particle transportation in a storage ring, as particle motion becomes more chaotic, its surrogate model prediction accuracy decreases correspondingly. Therefore, the prediction accuracy, acting as a chaos indicator, can be used directly as the objective for nonlinear beam dynamics optimization. This method provides a different perspective on nonlinear beam dynamics and an efficient method for nonlinear lattice optimization. Applications in dynamic aperture optimization are demonstrated as real world examples. △ Less

Submitted 9 November, 2021; v1 submitted 16 April, 2021; originally announced April 2021.

Comments: 24 pages, 17 figures

Machine learning-based direct solver for one-to-many problems on temporal shaping of relativistic electron beams

Authors: Jinyu Wan, Yi Jiao

Abstract: To control the temporal profile of a relativistic electron beam to meet requirements of various advanced scientific applications like free-electron-laser and plasma wakefield acceleration, a widely-used technique is to manipulate the dispersion terms which turns out to be one-to-many problems. Due to their intrinsic one-to-many property, current popular stochastic optimization approaches on tempor… ▽ More To control the temporal profile of a relativistic electron beam to meet requirements of various advanced scientific applications like free-electron-laser and plasma wakefield acceleration, a widely-used technique is to manipulate the dispersion terms which turns out to be one-to-many problems. Due to their intrinsic one-to-many property, current popular stochastic optimization approaches on temporal shaping may face the problems of long computing time or sometimes suggesting only one solution. Here we propose a real-time solver for one-to-many problems of temporal shaping, with the aid of a semi-supervised machine learning method, the conditional generative adversarial network (CGAN). We demonstrate that the CGAN solver can learn the one-to-many dynamics and is able to accurately and quickly predict the required dispersion terms for different custom temporal profiles. This machine learning-based solver is expected to have the potential for wide applications to one-to-many problems in other scientific fields. △ Less

Submitted 19 September, 2022; v1 submitted 11 March, 2021; originally announced March 2021.

Journal ref: Front. Phys. 17, 64601 (2022)

Ultra-fast quantum-well infared photodetectors operating at 10μm with flat response up to 70GHz at room temperature

Authors: M. Hakl, Q. Y. Lin, S. Lepillet, M. Billet, J-F. Lampin, S. Pirotta, R. Colombelli, W. J. Wan, J. C. Cao, H. Li, E. Peytavit, S. Barbieri

Abstract: III-V semiconductor mid-infrared photodetectors based on intersubband transitions hold a great potential for ultra-high-speed operation up to several hundreds of GHz. In this work we exploit a ~350nm-thick GaAs/Al0.2Ga0.8As multi-quantum-well heterostructure to demonstrate heterodyne detection at 10um wavelength with a nearly flat frequency response up to 70GHz at room temperature, solely limited… ▽ More III-V semiconductor mid-infrared photodetectors based on intersubband transitions hold a great potential for ultra-high-speed operation up to several hundreds of GHz. In this work we exploit a ~350nm-thick GaAs/Al0.2Ga0.8As multi-quantum-well heterostructure to demonstrate heterodyne detection at 10um wavelength with a nearly flat frequency response up to 70GHz at room temperature, solely limited by the measurement system bandwidth. This is the broadest RF-bandwidth reported to date for a quantum-well mid-infrared photodetector. Responsivities of 0.15A/W and 1.5A/W are obtained at 300K and 77K respectively. To allow ultrafast operation and illumination at normal incidence, the detector consists of a 50Ohm coplanar waveguide, monolithically integrated with a 2D-array of sub-wavelength antennas, electrically interconnected by suspended wires. With this device architecture we obtain a parasitic capacitance of ~30fF, corresponding to the static capacitance of the antennas, yielding a RC-limited 3dB cutoff frequency >150GHz at 300K, extracted with a small-signal equivalent circuit model. Using this model, we quantitively reproduce the detector frequency response and find intrinsic roll-off time constants as low as 1ps at room temperature. △ Less

Submitted 5 January, 2021; v1 submitted 1 July, 2020; originally announced July 2020.

Comments: The first version was updated, to correct some typos and add FigS5(b) to clarify the derivation of the detector circuit model

Nearly nondestructive thermometry of labeled cold atoms and application to isotropic laser cooling

Authors: Xin Wang, Yuan Sun, Hua-Dong Cheng, Jin-Yin Wan, Yan-Ling Meng, Ling Xiao, Liang Liu

Abstract: We have designed and implemented a straightforward method to deterministically measure the temperature of the selected segment of a cold atom ensemble, and we have also developed an upgrade in the form of nondestructive thermometry. The essence is to monitor the thermal expansion of the targeted cold atoms after labeling them through manipulating the internal states, and the nondestructive propert… ▽ More We have designed and implemented a straightforward method to deterministically measure the temperature of the selected segment of a cold atom ensemble, and we have also developed an upgrade in the form of nondestructive thermometry. The essence is to monitor the thermal expansion of the targeted cold atoms after labeling them through manipulating the internal states, and the nondestructive property relies upon the nearly lossless detection via driving a cycling transition. For cold atoms subject to isotropic laser cooling, this method has the unique capability of addressing only the atoms on the optical detection axis within the enclosure, which is exactly the part we care about in major applications such as atomic clock or quantum sensing. Furthermore, our results confirm the sub-Doppler cooling features in isotropic laser cooling, and we have investigated the relevant cooling properties. Meanwhile, we have applied the recently developed optical configuration with the cooling laser injection in the form of hollow beams, which helps to enhance the cooling performance and accumulate more cold atoms in the central regions. △ Less

Submitted 14 June, 2020; originally announced June 2020.

Comments: 6 figures;

Journal ref: Phys. Rev. Applied 14, 024030 (2020)

MoS$_2$ Dual-gate Transistors with Electrostatically Doped Contacts

Authors: Fuyou Liao, Yaocheng Sheng, Zhongxun Guo, Hongwei Tang, Yin Wang, Lingyi Zong, Xinyu Chen, Antoine Riaud, Jiahe Zhu, Yufeng Xie, Lin Chen, Hao Zhu, Qingqing Sun, Peng Zhou, Xiangwei Jiang, Jing Wan, Wenzhong Bao, David Wei Zhang

Abstract: Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as molybdenum disulfide (MoS2) have been intensively investigated because of their exclusive physical properties for advanced electronics and optoelectronics. In the present work, we study the MoS2 transistor based on a novel tri-gate device architecture, with dual-gate (Dual-G) in the channel and the buried side-gate (Side-G) for t… ▽ More Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as molybdenum disulfide (MoS2) have been intensively investigated because of their exclusive physical properties for advanced electronics and optoelectronics. In the present work, we study the MoS2 transistor based on a novel tri-gate device architecture, with dual-gate (Dual-G) in the channel and the buried side-gate (Side-G) for the source/drain regions. All gates can be independently controlled without interference. For a MoS2 sheet with a thickness of 3.6 nm, the Schottky barrier (SB) and non-overlapped channel region can be effectively tuned by electrostatically doping the source/drain regions with Side-G. Thus, the extrinsic resistance can be effectively lowered, and a boost of the ON-state current can be achieved. Meanwhile, the channel control remains efficient under the Dual-G mode, with an ON-OFF current ratio of 3E7 and subthreshold swing of 83 mV/decade. The corresponding band diagram is also discussed to illustrate the device operation mechanism. This novel device structure opens up a new way toward fabrication of high-performance devices based on 2D-TMDs. △ Less

Submitted 17 December, 2019; originally announced December 2019.

A Dual-gate MoS2 Photodetector Based on Interface Coupling Effect

Authors: Fuyou Liao, Jianan Deng, Xinyu Chen, Yin Wang, Xinzhi Zhang, Jian Liu, Hao Zhu, Lin Chen, Qingqing Sun, Weida Hu, Jianlu Wang, Jing Zhou, Peng Zhou, David Wei Zhang, Jing Wan, Wenzhong Bao

Abstract: Two-dimensional (2D) transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response spee… ▽ More Two-dimensional (2D) transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response speed and responsivity (R) and large dark current. Here, a dual-gated (DG) MoS2 phototransistor operating based on the interface coupling effect (ICE) is demonstrated. By simultaneously applying a negative top-gate voltage (VTG) and positive back-gate voltage (VBG) to the MoS2 channel, the photo-generated holes can be effectively trapped in the depleted region under TG. An ultrahigh R of ~1E5 A/W and detectivity (D*) of ~1E14 Jones have been achieved in several devices with different thickness under Pin of 53 uW/cm2 at VTG=-5 V. Moreover, the response time of the DG phototransistor can also be modulated based on the ICE. Based on these systematic measurements of MoS2 DG phototransistors, the results show that the ICE plays an important role in the modulation of photoelectric performances. Our results also pave the way for the future optoelectrical application of 2D TMDs materials and prompt for further investigation in the DG structured phototransistors. △ Less

Submitted 17 December, 2019; originally announced December 2019.

High-Performance Logic and Memory Devices Based on a Dual-Gated MoS2 Architecture

Authors: Fuyou Liao, Zhongxun Guo, Yin Wang, Yufeng Xie, Simeng Zhang, Yaochen Sheng, Hongwei Tang, Zihan Xu, Antoine Riaud, Peng Zhou, Jing Wan, Michael S. Fuhrer, Xiangwei Jiang, David Wei Zhang, Yang Chai, Wenzhong Bao

Abstract: In this work, we demonstrate a dual-gated (DG) MoS2 field effect transistors (FETs) in which the degraded switching performance of multilayer MoS2 can be compensated by the DG structure. It produces large current density (>100 μA/μm for a monolayer), steep subthreshold swing (SS) (~100 mV/dec for 5 nm thickness), and high on/off current ratio (greater than 107 for 10 nm thickness). Such DG structu… ▽ More In this work, we demonstrate a dual-gated (DG) MoS2 field effect transistors (FETs) in which the degraded switching performance of multilayer MoS2 can be compensated by the DG structure. It produces large current density (>100 μA/μm for a monolayer), steep subthreshold swing (SS) (~100 mV/dec for 5 nm thickness), and high on/off current ratio (greater than 107 for 10 nm thickness). Such DG structure not only improves electrostatic control but also provides an extra degree of freedom for manipulating the threshold voltage (VTH) and SS by separately tuning the top and back gate voltages, which are demonstrated in a logic inverter. Dynamic random access memory (DRAM) has a short retention time because of large OFF-state current in the Si MOSFET. Based on our DG MoS2-FETs, and a DRAM unit cell with a long retention time of 1260 ms are realized. A large-scale isolated MoS2 DG-FETs based on CVD-synthesized continuous films is also demonstrated, which shows potential applications for future wafer-scale digital and low-power electronics. △ Less

Submitted 17 December, 2019; originally announced December 2019.

On the accuracy of stiff-accurate diagonal implicit Runge-Kutta methods for finite volume based Navier-Stokes equations

Authors: Jiawei Wan, Ahsan Kareem, Haili Liao, Yunzhu Cai

Abstract: The paper aims at developing low-storage implicit Runge-Kutta methods which are easy to implement and achieve higher-order of convergence for both the velocity and pressure in the finite volume formulation of the incompressible Navier-Stokes equations on a static collocated grid. To this end, the effect of the momentum interpolation, a procedure required by the finite volume method for collocated… ▽ More The paper aims at developing low-storage implicit Runge-Kutta methods which are easy to implement and achieve higher-order of convergence for both the velocity and pressure in the finite volume formulation of the incompressible Navier-Stokes equations on a static collocated grid. To this end, the effect of the momentum interpolation, a procedure required by the finite volume method for collocated grids, on the differential-algebraic nature of the spatially-discretized Navier-Stokes equations should be examined first. A new framework for the momentum interpolation is established, based on which the semi-discrete Navier-Stokes equations can be strictly viewed as a system of differential-algebraic equations of index 2. The accuracy and convergence of the proposed momentum interpolation framework is examined. We then propose a new method of applying implicit Runge-Kutta schemes to the time-marching of the index 2 system of the incompressible Navier-Stokes equations. Compared to the standard method, the proposed one significantly reduces the numerical difficulties in momentum interpolations and delivers higher-order pressures without requiring additional computational effort. Applying stiff-accurate diagonal implicit Runge-Kutta (DIRK) schemes with the proposed method allows the schemes to attain the classical order of convergence for both the velocity and pressure. We also develop two families of low-storage stiff-accurate DIRK schemes to reduce the storage required by their implementations. Examining the two dimensional Taylor-Green vortex as an example, the spatial and temporal accuracy of the proposed methods in simulating incompressible flow is demonstrated. △ Less

Submitted 5 July, 2019; v1 submitted 5 June, 2019; originally announced June 2019.

Comments: 34 pages, 10 figures

MSC Class: 65M08

Machine learning valence force field model

Authors: Jing Wan, Ya-Wen Tan, Jin-Wu Jiang, Tienchong Chang, Xingming Guo

Abstract: The valence force field (VFF) model is a concise physical interpretation of the atomic interaction in terms of the bond and angle variations in the explicit quadratic functional form, while the machine learning (ML) method is a flexible numerical approach to make predictions based on some pre-obtained training data without the need of any explicit functions. We propose a so-called ML-VFF model, by… ▽ More The valence force field (VFF) model is a concise physical interpretation of the atomic interaction in terms of the bond and angle variations in the explicit quadratic functional form, while the machine learning (ML) method is a flexible numerical approach to make predictions based on some pre-obtained training data without the need of any explicit functions. We propose a so-called ML-VFF model, by combining the clear physical essence of the VFF model and the numerical flexibility of the ML method. Instead of imposing any explicit functional forms for the atomic interaction, the ML-VFF model predicts the potential and force with the Gaussian regression approach. We take graphene as an example to illustrate the ability of the ML-VFF model to make accurate predictions with relatively low computational expenses. We also discuss some key advantages and drawbacks of the ML-VFF model. △ Less

Submitted 5 August, 2018; originally announced August 2018.

Comments: four figures

Improvement in medium-long term frequency stability of integrating sphere cold atom clock

Authors: Peng Liu, Yanling Meng, Jinyin Wan, Xiumei Wang, Yaning Wang, Ling Xiao, Huadong Cheng, Liang Liu

Abstract: The medium-long term frequency stability of the integrating sphere cold atom clock was improved.During the clock operation, Rb atoms were cooled and manipulated using cooling light diffusely reflected by the inner surface of a microwave cavity in the clock. This light heated the cavity and caused a frequency drift from the resonant frequency of the cavity. Power fluctuations of the cooling light l… ▽ More The medium-long term frequency stability of the integrating sphere cold atom clock was improved.During the clock operation, Rb atoms were cooled and manipulated using cooling light diffusely reflected by the inner surface of a microwave cavity in the clock. This light heated the cavity and caused a frequency drift from the resonant frequency of the cavity. Power fluctuations of the cooling light led to atomic density variations in the cavity's central area, which increased the clock frequency instability through a cavity pulling effect. We overcame these limitations with appropriate solutions. A frequency stability of 3.5E-15 was achieved when the integrating time ? increased to 2E4 s. △ Less

Submitted 3 March, 2016; originally announced March 2016.

Reaching 5E-13 short term frequency stability of the integrating sphere cold atom clock

Authors: P Liu, Y L Meng, J Y Wan, X M Wang, Y N Wang, L Xiao, H D Cheng, L Liu

Abstract: We present an improvement of short term frequency stability of the integrating sphere cold atom clock after increasing the intensities of clock signals and optimizing the feedback loop of the clock. A short term frequency stability of $5.0\times10^{-13}τ^{-1/2}$ has been achieved and the limiting factors have been analyzed. We present an improvement of short term frequency stability of the integrating sphere cold atom clock after increasing the intensities of clock signals and optimizing the feedback loop of the clock. A short term frequency stability of $5.0\times10^{-13}τ^{-1/2}$ has been achieved and the limiting factors have been analyzed. △ Less

Submitted 11 January, 2016; originally announced January 2016.

Thermal stability of a free nanotube from single-layer black phosphorus

Authors: Kun Cai, Jing Wan, Ning Wei, Haifang Cai, Qing-Hua Qin

Abstract: Similar to the carbon nanotube fabricated from graphene sheet, a black phosphorus nanotube (BPNT) also can theoretically be produced by curling the rectangular single-layer black phosphorus (SLBP). In present study, the effect of thermal vibration of atoms on the failure of a BPNT is investigated using molecular dynamics simulations. Two types of double-shell BPNTs, which are obtained by curling t… ▽ More Similar to the carbon nanotube fabricated from graphene sheet, a black phosphorus nanotube (BPNT) also can theoretically be produced by curling the rectangular single-layer black phosphorus (SLBP). In present study, the effect of thermal vibration of atoms on the failure of a BPNT is investigated using molecular dynamics simulations. Two types of double-shell BPNTs, which are obtained by curling the rectangular SLBP along its armchair/pucker direction and zigzag direction (in-plane normal) respectively, are involved in simulation. At finite temperature, a bond on the outer shell of tube is under tension due to both of curvature of tube and serious thermal vibration of atoms. As the length of a bond with such elongation approaches its critical value, i.e., 0.279 nm, or the smallest distance between two nonbonding phosphorus atoms is over 0.389nm caused by great variation of bond angle, the tube fails quickly. The critical stable states of either an armchair or a zigzag BPNT at finite temperature are calculated and compared. To achieve a stable BPNT with high robustness, the curvature of the tube should be reduced or the tube should work at a lower temperature. Only when the BPNT has structural stability, it has a potential application as a nanowire in a future nano electro-mechanical system (NEMS). △ Less

Submitted 22 December, 2015; originally announced December 2015.

A new scheme of compact cold atom clock based on diffuse laser cooling in a cylindrical cavity

Authors: Peng Liu, Yanling Meng, Jinyin Wan, Xiumei Wang, Yaning Wang, Ling Xiao, Huadong Cheng, Liang Liu

Abstract: We present a new scheme of compact Rubidium cold-atom clock which performs the diffuse light cooling, the microwave interrogation and the detection of the clock signal in a cylindrical microwave cavity. The diffuse light is produced by the reflection of the laser light at the inner surface of the microwave cavity. The pattern of injected laser beams is specially designed to make most of the cold a… ▽ More We present a new scheme of compact Rubidium cold-atom clock which performs the diffuse light cooling, the microwave interrogation and the detection of the clock signal in a cylindrical microwave cavity. The diffuse light is produced by the reflection of the laser light at the inner surface of the microwave cavity. The pattern of injected laser beams is specially designed to make most of the cold atoms accumulate in the center of the microwave cavity. The microwave interrogation of cold atoms in the cavity leads to Ramsey fringes whose line-width is 24.5 Hz and the contrast of 95.6% when the free evolution time is 20 ms. The frequency stability of $7.3\times10^{-13}τ^{-1/2}$ has been achieved recently. The scheme of this physical package can largely reduce the complexity of the cold atom clock, and increase the performance of the clock. △ Less

Submitted 25 September, 2015; originally announced September 2015.

Comments: 5 pages, 6 figures, 1 table

Journal ref: Phys. Rev. A 92, 062101 (2015)

Observation of magneto-optical rotation effects in cold $^{87}$Rb atoms in an integrating sphere

Authors: Jinyin Wan, Yanling Meng, Ling Xiao, Peng Liu, Xiumei Wang, Yaning Wang, Huadong Cheng, Liang Liu

Abstract: We present a modified scheme for detection of the magneto-optical rotation (MOR) effect, where a linearly polarized laser field is interacting with cold $^{87}$Rb atoms in an integrating sphere. The rotation angle of the probe beam's polarization plane is detected in the experiment. The results indicate that the biased magnetic field, the probe light intensity and detuning, and the cold atoms' tem… ▽ More We present a modified scheme for detection of the magneto-optical rotation (MOR) effect, where a linearly polarized laser field is interacting with cold $^{87}$Rb atoms in an integrating sphere. The rotation angle of the probe beam's polarization plane is detected in the experiment. The results indicate that the biased magnetic field, the probe light intensity and detuning, and the cold atoms' temperature are key parameters for the MOR effect. This scheme may improve the contrast of the rotation signal and provide an useful approach for high contrast cold atom clocks and magnetometers. △ Less

Submitted 11 January, 2016; v1 submitted 8 October, 2014; originally announced October 2014.

Comments: 4 pages, 5 figures. arXiv admin note: text overlap with arXiv:physics/0203077 by other authors

Solar Energy Generation in Three Dimensions

Authors: Marco Bernardi, Nicola Ferralis, Jin H. Wan, Rachelle Villalon, Jeffrey C. Grossman

Abstract: We formulate, solve computationally and study experimentally the problem of collecting solar energy in three dimensions(1-5). We demonstrate that absorbers and reflectors can be combined in the absence of sun tracking to build three-dimensional photovoltaic (3DPV) structures that can generate measured energy densities (energy per base area, kWh/m2) higher by a factor of 2-20 than stationary flat P… ▽ More We formulate, solve computationally and study experimentally the problem of collecting solar energy in three dimensions(1-5). We demonstrate that absorbers and reflectors can be combined in the absence of sun tracking to build three-dimensional photovoltaic (3DPV) structures that can generate measured energy densities (energy per base area, kWh/m2) higher by a factor of 2-20 than stationary flat PV panels, versus an increase by a factor of 1.3-1.8 achieved with a flat panel using dual-axis sun tracking(6). The increased energy density is countered by a higher solar cell area per generated energy for 3DPV compared to flat panel design (by a factor of 1.5-4 in our conditions), but accompanied by a vast range of improvements. 3DPV structures are steadier sources of solar energy generation at all latitudes: they can double the number of peak power generation hours and dramatically reduce the seasonal, latitude and weather variations of solar energy generation compared to a flat panel design. Self-supporting 3D shapes can create new schemes for PV installation and the increased energy density can facilitate the use of cheaper thin film materials in area-limited applications. Our findings suggest that harnessing solar energy in three dimensions can open new avenues towards Terawatt-scale generation. △ Less

Submitted 10 March, 2012; v1 submitted 14 December, 2011; originally announced December 2011.

Comments: 40 pages, 16 pages paper (3 figures), 24 pages supplementary information (7 figures). Energy and Environmental Science (2012, Published on-line)

Structural Symmetry of Two-dimensional Metallic Arrays: Implications for Surface Plasmon Excitations

Authors: H. Iu, H. C. ong, Jones T. K. Wan

Abstract: In recent years, there has been intensive investigation of surface plasmon polaritons (SPPs) in the science and engineering fields. Understanding the physics of surface plasmon excitation is essential to the manipulation of SPPs, and most existing studies focus on (-1,0)-type SPP excitation. In this article, we report our recent investigation of the (0,+/- 1)-type SPP excitation of a gold two-di… ▽ More In recent years, there has been intensive investigation of surface plasmon polaritons (SPPs) in the science and engineering fields. Understanding the physics of surface plasmon excitation is essential to the manipulation of SPPs, and most existing studies focus on (-1,0)-type SPP excitation. In this article, we report our recent investigation of the (0,+/- 1)-type SPP excitation of a gold two-dimensional nano-cavity array using finite-difference time-domain methodology. Our particular focus is on the symmetry properties of (0,+/- 1)-SPPs excited by different polarizations of light. It is found that polarization has strong implications for the field distribution of the corresponding SPPs. As a result, the control of polarization may provide important insights into the manipulation of SPPs. △ Less

Submitted 18 February, 2009; originally announced February 2009.

Pressure Correction in Density Functional Theory Calculations

Authors: S. H. Lee, Jones T. K. Wan

Abstract: First-principles calculations based on density functional theory have been widely used in studies of the structural, thermoelastic, rheological, and electronic properties of earth-forming materials. The exchange-correlation term, however, is implemented based on various approximations, and this is believed to be the main reason for discrepancies between experiments and theoretical predictions. I… ▽ More First-principles calculations based on density functional theory have been widely used in studies of the structural, thermoelastic, rheological, and electronic properties of earth-forming materials. The exchange-correlation term, however, is implemented based on various approximations, and this is believed to be the main reason for discrepancies between experiments and theoretical predictions. In this work, by using periclase MgO as a prototype system we examine the discrepancies in pressure and Kohn-Sham energy that are due to the choice of the exchange-correlation functional. For instance, we choose local density approximation and generalized gradient approximation. We perform extensive first-principles calculations at various temperatures and volumes and find that the exchange-correlation-based discrepancies in Kohn-Sham energy and pressure should be independent of temperature. This implies that the physical quantities, such as the equation of states, heat capacity, and the Grüneisen parameter, estimated by a particular choice of exchange-correlation functional can easily be transformed into those estimated by another exchange-correlation functional. Our findings may be helpful in providing useful constraints on mineral properties %at thermodynamic conditions compatible to deep Earth. at deep Earth thermodynamic conditions. △ Less

Submitted 11 November, 2008; v1 submitted 23 October, 2008; originally announced October 2008.

Tunable thermal emission at infrared frequencies via tungsten gratings

Authors: Jones T. K. Wan

Abstract: The author investigates the manipulation of thermal emission by using one-dimensional tungsten gratings with different groove depths. It is found that, by systematically increasing the depth of the groove, the linearly polarized emission at particular frequencies can be substantially enhanced to achieve that of the blackbody radiation limit, whereas the emission in other frequency ranges shows n… ▽ More The author investigates the manipulation of thermal emission by using one-dimensional tungsten gratings with different groove depths. It is found that, by systematically increasing the depth of the groove, the linearly polarized emission at particular frequencies can be substantially enhanced to achieve that of the blackbody radiation limit, whereas the emission in other frequency ranges shows no noticeable changes. The results can provide useful insights into the design of thermovoltaic applications. △ Less

Submitted 22 December, 2008; v1 submitted 23 October, 2008; originally announced October 2008.

First principles study of density, viscosity, and diffusion coefficients of liquid MgSiO3 at conditions of the Earth's deep mantle

Authors: Jones T. K. Wan, Thomas S. Duffy, Sandro Scandolo, Roberto Car

Abstract: Constant-pressure constant-temperature {\it ab initio} molecular dynamics simulations at high temperatures have been used to study MgSiO$_3$ liquid, the major constituent of the Earth's lower mantle to conditions of the Earth's core-mantle boundary (CMB). We have performed variable-cell {\it ab initio} molecular dynamic simulations at relevant thermodynamic conditions across one of the measured… ▽ More Constant-pressure constant-temperature {\it ab initio} molecular dynamics simulations at high temperatures have been used to study MgSiO$_3$ liquid, the major constituent of the Earth's lower mantle to conditions of the Earth's core-mantle boundary (CMB). We have performed variable-cell {\it ab initio} molecular dynamic simulations at relevant thermodynamic conditions across one of the measured melting curves. The calculated equilibrium volumes and densities are compared with the simulations using an orthorhombic perovskite configuration under the same conditions. For molten MgSiO$_3$, we have determined the diffusion coefficients and shear viscosities at different thermodynamic conditions. Our results provide new constraints on the properties of molten MgSiO$_3$ at conditions near the core-mantle boundary. The volume change on fusion is positive throughout the pressure-temperature conditions examined and ranges from 5% at 88 GPa and 3500 K to 2.9% at 120 GPa and 5000 K. Nevertheless, neutral or negatively buoyant melts from (Mg,Fe)SiO$_3$ perovskite compositions at deep lower mantle conditions are consistent with existing experimental constraints on solid-liquid partition coefficients for Fe. Our simulations indicate that MgSiO$_3$ is liquid at 120 GPa and 4500 K, consistent with the lower range of experimental melting curves for this material. Linear extrapolation of our results indicates that the densities of liquid and solid perovskite MgSiO$_3$ will become equal near 180 GPa. △ Less

Submitted 30 May, 2005; originally announced May 2005.

Comments: 6 pages, 3 figures

Thermal emission by photonic micro-textured surfaces

Authors: Jones T. K. Wan, C. T. Chan

Abstract: Ordinary metallic photonic crystals (PCs) have photonic band gaps in which the density of states (DOS) is strongly modified. Thermal emission of photons can be suppressed and enhanced accordingly. We consider the thermal emission characteristics of a metallic photonic crystal slab with a tunable thickness which in the thick limit approaches that of a photonic crystal and in the thin limit approa… ▽ More Ordinary metallic photonic crystals (PCs) have photonic band gaps in which the density of states (DOS) is strongly modified. Thermal emission of photons can be suppressed and enhanced accordingly. We consider the thermal emission characteristics of a metallic photonic crystal slab with a tunable thickness which in the thick limit approaches that of a photonic crystal and in the thin limit approaches that of a textured surface. We find that a thick photonic crystal suppresses emission in a specific range while a thin slab suppresses low frequency emission. △ Less

Submitted 24 May, 2005; originally announced May 2005.

Dielectric Behavior of Nonspherical Cell Suspensions

Authors: Jun Lei, Jones T. K. Wan, K. W. Yu, Hong Sun

Abstract: Recent experiments revealed that the dielectric dispersion spectrum of fission yeast cells in a suspension was mainly composed of two sub-dispersions. The low-frequency sub-dispersion depended on the cell length, whereas the high-frequency one was independent of it. The cell shape effect was qualitatively simulated by an ellipsoidal cell model. However, the comparison between theory and experime… ▽ More Recent experiments revealed that the dielectric dispersion spectrum of fission yeast cells in a suspension was mainly composed of two sub-dispersions. The low-frequency sub-dispersion depended on the cell length, whereas the high-frequency one was independent of it. The cell shape effect was qualitatively simulated by an ellipsoidal cell model. However, the comparison between theory and experiment was far from being satisfactory. In an attempt to close up the gap between theory and experiment, we considered the more realistic cells of spherocylinders, i.e., circular cylinders with two hemispherical caps at both ends. We have formulated a Green function formalism for calculating the spectral representation of cells of finite length. The Green function can be reduced because of the azimuthal symmetry of the cell. This simplification enables us to calculate the dispersion spectrum and hence access the effect of cell structure on the dielectric behavior of cell suspensions. △ Less

Submitted 23 March, 2001; originally announced March 2001.

Comments: Preliminary results have been reported in the 2001 March Meeting of the American Physical Society. Accepted for publications in J. Phys.: Condens. Matter

Journal ref: J. Phys.: Condens. Matter 13, 3583 (2001).

Interparticle force in polydisperse electrorheological fluids: Beyond the dipole approximation

Authors: Y. L. Siu, Jones T. K. Wan, K. W. Yu

Abstract: We have developed a multiple image method to compute the interparticle force for a polydisperse electrorheological (ER) fluid. We apply the formalism to a pair of dielectric spheres of different dielectric constants and calculate the force as a function of the separation. The results show that the point-dipole (PD) approximation errs considerably because many-body and multipolar interactions are… ▽ More We have developed a multiple image method to compute the interparticle force for a polydisperse electrorheological (ER) fluid. We apply the formalism to a pair of dielectric spheres of different dielectric constants and calculate the force as a function of the separation. The results show that the point-dipole (PD) approximation errs considerably because many-body and multipolar interactions are ignored. The PD approximation becomes even worse when the dielectric contrast between the particles and the host medium is large. From the results, we show that the dipole-induced-dipole (DID) model yields very good agreements with the multiple image results for a wide range of dielectric contrasts and polydispersity. The DID model accounts for multipolar interaction partially and is simple to use in computer simulation of polydisperse ER fluids. △ Less

Submitted 4 February, 2001; originally announced February 2001.

Comments: Presented at Conference on Computational Physics (CCP2000), held at Gold Coast, Australia from 3-8, December 2000

Journal ref: Comput. Phys. Comm. 142, 446 (2001)

Local field distribution near corrugated interfaces: Green's function formulation

Authors: K. W. Yu, Jones T. K. Wan

Abstract: We have developed a Green's function formalism to compute the local field distribution near an interface separating two media of different dielectric constants. The Maxwell's equations are converted into a surface integral equation; thus it greatly simplifies the solutions and yields accurate results for interfaces of arbitrary shape. The integral equation is solved and the local field distribut… ▽ More We have developed a Green's function formalism to compute the local field distribution near an interface separating two media of different dielectric constants. The Maxwell's equations are converted into a surface integral equation; thus it greatly simplifies the solutions and yields accurate results for interfaces of arbitrary shape. The integral equation is solved and the local field distribution is obtained for a periodic interface. △ Less

Submitted 9 March, 2001; v1 submitted 4 February, 2001; originally announced February 2001.

Comments: Presented at the Conference on Computational Physics (CCP2000), held at Gold Coast, Australia from 3 - 8, December 2000. To be published in Proceedings of CCP2000

Journal ref: Comput. Phys. Comm. 142, 368 (2001)

Effects of geometric anisotropy on local field distribution: Ewald-Kornfeld formulation

Authors: C. K. Lo, Jones T. K. Wan, K. W. Yu

Abstract: We have applied the Ewald-Kornfeld formulation to a tetragonal lattice of point dipoles, in an attempt to examine the effects of geometric anisotropy on the local field distribution. The various problems encountered in the computation of the conditionally convergent summation of the near field are addressed and the methods of overcoming them are discussed. The results show that the geometric ani… ▽ More We have applied the Ewald-Kornfeld formulation to a tetragonal lattice of point dipoles, in an attempt to examine the effects of geometric anisotropy on the local field distribution. The various problems encountered in the computation of the conditionally convergent summation of the near field are addressed and the methods of overcoming them are discussed. The results show that the geometric anisotropy has a significant impact on the local field distribution. The change in the local field can lead to a generalized Clausius-Mossotti equation for the anisotropic case. △ Less

Submitted 23 January, 2001; originally announced January 2001.

Comments: Accepted for publications, Journal of Physics: Condensed Matter

Journal ref: Journal Physics: Condensed Matter 13, 1315 (2001)