-
Affordable, manageable, practical, and scalable (AMPS) high-yield and high-gain inertial fusion
Authors:
Andrew Alexander,
Laura Robin Benedetti,
Indrani Bhattacharyya,
Jared Bowen,
June Cabatu,
Virgil Cacdac,
Chhavi Chhavi,
Chiatai Chen,
Karen Chen,
Dan Clark,
Jerry Clark,
Tyler Cope,
Will Dannemann,
Scott Davidson,
David DeHaan,
John Dugan,
Mindy Eihusen,
C. Leland Ellison,
Carlos Esquivel,
David Ethridge,
Blake Ferguson,
Bryan Ferguson,
Jon Fry,
Fernando Garcia-Rubio,
Tarun Goyal
, et al. (41 additional authors not shown)
Abstract:
High-yield inertial fusion offers a transformative path to affordable clean firm power and advanced defense capabilities. Recent milestones at large facilities, particularly the National Ignition Facility (NIF), have demonstrated the feasibility of ignition but highlight the need for approaches that can deliver large amounts of energy to fusion targets at much higher efficiency and lower cost. We…
▽ More
High-yield inertial fusion offers a transformative path to affordable clean firm power and advanced defense capabilities. Recent milestones at large facilities, particularly the National Ignition Facility (NIF), have demonstrated the feasibility of ignition but highlight the need for approaches that can deliver large amounts of energy to fusion targets at much higher efficiency and lower cost. We propose that pulser-driven inertial fusion energy (IFE), which uses high-current pulsed-power technology to compress targets to thermonuclear conditions, can achieve this goal. In this paper, we detail the physics basis for pulser IFE, focusing on magnetized liner inertial fusion (MagLIF), where cylindrical metal liners compress DT fuel under strong magnetic fields and pre-heat. We discuss how the low implosion velocities, direct-drive efficiency, and scalable pulser architecture can achieve ignition-level conditions at low capital cost. Our multi-dimensional simulations, benchmarked against experiments at the Z facility, show that scaling from 20 MA to 50-60 MA of current enables net facility gain. We then introduce our Demonstration System (DS), a pulsed-power driver designed to deliver more than 60 MA and store approximately 80 MJ of energy. The DS is designed to achieve a 1000x increase in effective performance compared to the NIF, delivering approximately 100x greater facility-level energy gain -- and importantly, achieving net facility gain, or Qf>1 -- at just 1/10 the capital cost. We also examine the engineering requirements for repetitive operation, target fabrication, and chamber maintenance, highlighting a practical roadmap to commercial power plants.
△ Less
Submitted 14 April, 2025;
originally announced April 2025.
-
Design, construction, and characterization of a compact DD neutron generator designed for 40Ar/39Ar geochronology
Authors:
Mauricio Ayllon,
Parker A. Adams,
Joseph D. Bauer,
Jon C. Batchelder,
Tim A. Becker,
Lee A. Bernstein,
Su-Ann Chong,
Jay James,
Leo E. Kirsch,
Ka-Ngo Leung,
Eric F. Matthews,
Jonathan T. Morrell,
Paul R. Renne,
Andrew M. Rogers,
Daniel Rutte,
Andrew S. Voyles,
Karl Van Bibber,
Cory S. Waltz
Abstract:
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near futu…
▽ More
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near future. In this work, we present an overview of the High Flux Neutron Generator (HFNG) which includes a variety of simulations, analytical models, and experimental validation of results. Extensive analysis was performed in order to characterize the neutron yield, flux, and energy distribution at specific locations where samples may be loaded for irradiation. A notable design feature of the HFNG is the possibility for sample irradiation internal to the cathode, just 8 mm away from the neutron production site, thus maximizing the neutron flux (n/cm2/s). The generator's maximum neutron flux at this irradiation position is 2.58e7 n/cm2/s +/- 5% (approximately 3e8 n/s total yield) as measured via activation of small natural indium foils. However, future development is aimed at achieving an order of magnitude increase in flux. Additionally, the deuterium ion beam optics were optimized by simulations for various extraction configurations in order to achieve a uniform neutron flux distribution and an acceptable heat load. Finally, experiments were performed in order to benchmark the modeling and characterization of the HFNG.
△ Less
Submitted 9 April, 2018; v1 submitted 9 March, 2018;
originally announced March 2018.
-
Beam-induced Back-streaming Electron Suppression Analysis for Accelerator Type Neutron Generators
Authors:
Cory Waltz,
Mauricio Ayllon,
Tim Becker,
Lee Bernstein,
Ka-Ngo Leung,
Leo Kirsch,
Paul Renne,
Karl Van Bibber
Abstract:
A facility based on a next-generation, high-flux D-D neutron generator has been commissioned and it is now operational at the University of California, Berkeley. The current generator design produces near monoenergetic 2.45 MeV neutrons at outputs of 10^8 n/s. Calculations provided show that future conditioning at higher currents and voltages will allow for a production rate over 10^10 n/s. A sign…
▽ More
A facility based on a next-generation, high-flux D-D neutron generator has been commissioned and it is now operational at the University of California, Berkeley. The current generator design produces near monoenergetic 2.45 MeV neutrons at outputs of 10^8 n/s. Calculations provided show that future conditioning at higher currents and voltages will allow for a production rate over 10^10 n/s. A significant problem encountered was beam-induced electron backstreaming, that needed to be resolved to achieve meaningful beam currents. Two methods of suppressing secondary electrons resulting from the deuterium beam striking the target were tested: the application of static electric and magnetic fields. Computational simulations of both techniques were done using a finite element analysis in COMSOL Multiphysics. Experimental tests verified these simulation results. The most reliable suppression was achieved via the implementation of an electrostatic shroud with a voltage offset of -800 V relative to the target.
△ Less
Submitted 1 January, 2017;
originally announced January 2017.
