-
A Moving-Trap Zeeman Decelerator
Authors:
Lewis A. McArd,
Arin Mizouri,
Paul A. Walker,
Vijay Singh,
Ulrich Krohn,
Ed A. Hinds,
David Carty
Abstract:
We present a moving-trap Zeeman decelerator (MTZD) for use in molecular beam manipulation and magnetic-trapping experiments of paramagnetic atoms and molecules. The 0.49 m MTZD consists of a combination of a 2D magnetic quadrupole guide and deceleration coils, which together produce an array of 3D magnetic traps. The design is based on that of Trimeche et al. with significant modifications. The 2D…
▽ More
We present a moving-trap Zeeman decelerator (MTZD) for use in molecular beam manipulation and magnetic-trapping experiments of paramagnetic atoms and molecules. The 0.49 m MTZD consists of a combination of a 2D magnetic quadrupole guide and deceleration coils, which together produce an array of 3D magnetic traps. The design is based on that of Trimeche et al. with significant modifications. The 2D quadrupole is driven by fast rising and falling square pulses of current (up to 700 A) of arbitrary lengths of time. The traps can be made to move at velocities from ca. 370 m/s down to zero, which is done by driving through the deceleration coils a sinusoidal current with frequencies ranging from zero to ca. 9 kHz and peak currents up to 1000 A. The trap velocity is proportional to the current frequency. The MTZD manipulates the velocities of molecular beams by traveling initially at the same velocity as the beam. 3D guiding is achieved with a constant current frequency and deceleration is achieved with a downward chirp of the current frequency at a rate corresponding to the desired deceleration. We explain the technical design and operation principles of the MTZD and we detail the custom power electronics that drive the 2D quadrupole guide and the decelerator coils. We present extensive Monte-Carlo trajectory simulations to demonstrate the properties of the MTZD and we conclude that decelerations should be kept below 30000 m/s/s to maintain a good 6D phase-space acceptance. In proof-of-principle experiments, with the deceleration coils operating with a reduced current in the range 100-200 A, we demonstrate the 3D guiding of a beam of metastable argon atoms at 373 m/s and deceleration at 25000 m/s/s from 342 m/s to 304 m/s. The deceleration corresponds to the removal of 21% of the kinetic energy of the beam.
△ Less
Submitted 27 July, 2018;
originally announced July 2018.
-
Layout considerations for a future electron plasma research accelerator facility EuPRAXIA
Authors:
Paul Andreas Walker,
Ralph Wolfgang Assmann,
Reinhard Brinkmann,
Enrica Chiadroni,
Ulrich Dorda,
Massimo Ferrario,
Dariusz Kocon,
Barbara Marchetti,
Lukas Pribyl,
Arnd Specka,
Roman Walczak
Abstract:
The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is preparing a conceptual design for a highly compact and cost-effective European facility with multi-GeV electron beams using plasma as the acceleration medium. The design includes two user areas: one for FEL science and one for High Energy Physics (HEP) detector development and other pilot ap…
▽ More
The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is preparing a conceptual design for a highly compact and cost-effective European facility with multi-GeV electron beams using plasma as the acceleration medium. The design includes two user areas: one for FEL science and one for High Energy Physics (HEP) detector development and other pilot applications. The accelerator facility will be based on a laser and/or a beam driven plasma acceleration approach. This contribution introduces layout considerations of the future plasma accelerator facilities in the context of EuPRAXIA. It compares conventional and novel plasma accelerator facility requirements and presents potential layouts for the future site. Together with performance analysis, cost effectiveness, and targeted user cases of the individual configurations, such layout studies will later enable a ranking of potential configurations. Based on this information the optimal combination of technologies will be defined for the 2019 conceptual design report of the EuPRAXIA facility.
△ Less
Submitted 1 February, 2018;
originally announced February 2018.
-
LUX -- A Laser-Plasma Driven Undulator Beamline
Authors:
N. Delbos,
C. Werle,
I. Dornmair,
T. Eichner,
L. Hübner,
S. Jalas,
S. W. Jolly,
M. Kirchen,
V. Leroux,
P. Messner,
M. Schnepp,
M. Trunk,
P. A. Walker,
P. Winkler,
A. R. Maier
Abstract:
The LUX beamline is a novel type of laser-plasma accelerator. Building on the joint expertise of the University of Hamburg and DESY the beamline was carefully designed to combine state-of-the-art expertise in laser-plasma acceleration with the latest advances in accelerator technology and beam diagnostics. LUX introduces a paradigm change moving from single-shot demonstration experiments towards a…
▽ More
The LUX beamline is a novel type of laser-plasma accelerator. Building on the joint expertise of the University of Hamburg and DESY the beamline was carefully designed to combine state-of-the-art expertise in laser-plasma acceleration with the latest advances in accelerator technology and beam diagnostics. LUX introduces a paradigm change moving from single-shot demonstration experiments towards available, stable and controllable accelerator operation. Here, we discuss the general design concepts of LUX and present first critical milestones that have recently been achieved, including the generation of electron beams at the repetition rate of up to 5 Hz with energies above 600 MeV and the generation of spontaneous undulator radiation at a wavelength well below 9 nm.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Status and Objectives of the Dedicated Accelerator R&D Facility "SINBAD" at DESY
Authors:
U. Dorda,
B. Marchetti,
J. Zhu,
F. Mayet,
W. Kuropka,
T. Vinatier,
G. Vashchenko,
K. Galaydych,
P. A. Walker,
D. Marx,
R. Brinkmann,
R. Assmann,
N. H. Matlis,
A. Fallahi,
F. X. Kaertner
Abstract:
We present a status update on the dedicated R\&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100\,MeV S-band linac at its core. We present the objectives of…
▽ More
We present a status update on the dedicated R\&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100\,MeV S-band linac at its core. We present the objectives of this experiment ranging from the study of compression techniques to sub-fs level to its application as injector for various advanced acceleration schemes e.g. the plans to use ARES as a test-site for DLA experiments in the context of the ACHIP collaboration. The time-line including the planned extension with laser driven plasma-wakefield acceleration is presented. The second initial experiment is AXSIS which aims to accelerate fs-electron bunches to 15\,MeV in a THz driven dielectric structure and subsequently create X-rays by inverse Compton scattering.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
