-
Project TAIPAN: Results from a Novel Gravity Gradiometer Field Test
Authors:
Alexey V. Veryaskin,
Howard C. Golden,
Khyl J. McMahon,
Neil M. Provins,
Frank J. van Kann,
Thomas J. Meyer
Abstract:
Project TAIPAN has been carried out jointly by Trinity Research Lab and the Frequency and Quantum Metrology Research Group located at the School of Physics, Mathematics and Computing of the University of Western Australia (UWA). Lockheed Martin Corporation (USA) has also been a partner in this joint collaboration providing financial backing to the project and other support including advanced model…
▽ More
Project TAIPAN has been carried out jointly by Trinity Research Lab and the Frequency and Quantum Metrology Research Group located at the School of Physics, Mathematics and Computing of the University of Western Australia (UWA). Lockheed Martin Corporation (USA) has also been a partner in this joint collaboration providing financial backing to the project and other support including advanced modelling, assessment of laboratory tests and data analysis. The project aim was to develop a miniaturised gravity gradiometer to measure horizontal mixed gradient components of the Earth gravity in a small, lightweight package that can be deployed in a fixed 4D mode, in a borehole, or on moving exploration platforms including ground-based, airborne and submersible. The gradiometer design has evolved through a few prototypes combining the design of its sensing element with ultra low noise microwave and capacitive read out. The most recent prototype of the gradiometer using novel ultra sensitive capacitive pick off metrology has been trialled in the harsh environment of Outback Western Australia over a known gravity anomaly displaying steep gradients. Despite adverse weather conditions, results of the trial indicate that the gradiometer operated as expected, closely replicating the gravity gradient profile extrapolated from a regional gravity survey.
△ Less
Submitted 23 November, 2024;
originally announced November 2024.
-
A Novel Capacitance-to-Phase Transducer Based on a Simple Resonant Circuit
Authors:
Frank J. van Kann,
Alexey V. Veryaskin
Abstract:
A novel room temperature capacitance-to-phase transducer is described, which uses a modified All-Pass filter architecture combined with a simple series resonant tank circuit with a moderate Q-factor. It is fashioned from a discrete inductor with small dissipation resonating with a grounded capacitor acting as the sensor, to obtain a relative resolution equal to or better than 10-11 in a 1 Hz bandw…
▽ More
A novel room temperature capacitance-to-phase transducer is described, which uses a modified All-Pass filter architecture combined with a simple series resonant tank circuit with a moderate Q-factor. It is fashioned from a discrete inductor with small dissipation resonating with a grounded capacitor acting as the sensor, to obtain a relative resolution equal to or better than 10-11 in a 1 Hz bandwidth. The transducer converts the change in capacitance to the change in the phase of a carrier signal at the resonance frequency and is configured to act as a close approximation of the almost ideal All-Pass filter. This cancels out the effects of amplitude modulation when the carrier signal is imperfectly tuned to the resonance. When used as a mechanical displacement-to-phase transducer, the predicted position noise was approximately 3 femtometre/rootHz. Other applications of the proposed circuit include the measurement of the electric field, where the sensing capacitor depends on the applied electric field. In addition, the circuit can be easily adapted to function with very small capacitance values (1 - 2 pF) as is typical in MEMS-based transducers.
△ Less
Submitted 27 December, 2023; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Static and Dynamic Analyses of Free-Hinged-Hinged-Hinged-Free Beam in Non-Homogeneous Gravitational Field: Application to Gravity Gradiometry
Authors:
Alexey V Veryaskin,
Thomas J Meyer
Abstract:
The first analytical evaluation of free-hinged-hinged-hinged-free beam, proposed to be used as a primary sensing element for gravity gradiometry, is presented. The results of the evaluation, obtained in quadratures, are applied to the beam's structure such as the locations of hinges that form the beam's boundary conditions allowing only free rotations around the nodal axes. The latter are purposel…
▽ More
The first analytical evaluation of free-hinged-hinged-hinged-free beam, proposed to be used as a primary sensing element for gravity gradiometry, is presented. The results of the evaluation, obtained in quadratures, are applied to the beam's structure such as the locations of hinges that form the beam's boundary conditions allowing only free rotations around the nodal axes. The latter are purposely chosen to minimize the beam's symmetric free ends deflection under the uniform force of gravity while simultaneously permitting the beam's maximum possible mirror-symmetric free ends deflection due to a gravity gradient along its length. The flexible triple hinged beam's deflection from its unperturbed position is internally entangled at all locations including free ends and this allows for synchronized mechanical displacements measurements at any beam's deflection point. Some methods of manufacturing such sensing element and the corresponding error factors are also discussed for the first time.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Can Traditional Terrestrial Applications of Gravity Gradiometry Rely Upon Quantum Technologies ? A Side View
Authors:
Alexey V. Veryaskin,
Michael E. Tobar
Abstract:
The era of practical terrestrial applications of gravity gradiometry begun in 1890 when Baron Lorand von Eötvös, a Hungarian nobleman and a talented physicist and engineer, invented his famous torsion balance - the first practical gravity gradients measuring device. It was credited for the major oil discoveries later in Texas (USA). A 100 years later Kasevich and Chu pioneered the use of quantum p…
▽ More
The era of practical terrestrial applications of gravity gradiometry begun in 1890 when Baron Lorand von Eötvös, a Hungarian nobleman and a talented physicist and engineer, invented his famous torsion balance - the first practical gravity gradients measuring device. It was credited for the major oil discoveries later in Texas (USA). A 100 years later Kasevich and Chu pioneered the use of quantum physics for gravity gradient measurements. Since then cold-atom gravity gradiometers, or matter-wave gravity gradiometers, had been under development at almost every physics department of top-rated universities around the globe. After another 30 years since the Kasevich and Chu publication in 1992, which had led to the first ever quantum gravity gradiometer, the corresponding research and development ceased from being profoundly active a few years back. This article is an attempt to understand and explain what may have happened to the Quantum Invasion into the area of applied physics and precision engineering that traditionally has been occupied by non-quantum technologies developed for about a 130 years of the history of gravity gradiometry.
△ Less
Submitted 14 January, 2022; v1 submitted 12 August, 2021;
originally announced August 2021.
-
Moving-base Gradiometry without Gradiometers: Back to the Future
Authors:
Alexey V. Veryaskin
Abstract:
New looks at some old concepts of moving-base gravity and magnetic gradient measurements are discussed. This can open a door to ultra-miniature, UAV deployable and cost effective geophysical exploration systems.
New looks at some old concepts of moving-base gravity and magnetic gradient measurements are discussed. This can open a door to ultra-miniature, UAV deployable and cost effective geophysical exploration systems.
△ Less
Submitted 4 July, 2014; v1 submitted 3 July, 2014;
originally announced July 2014.
-
A Novel EM Gradiometric Surveying System for Geophysical Reconnaissance
Authors:
Alexey V. Veryaskin,
Francis A. Torres,
Timo P. Vaalsta,
Ju Li,
David G. Blair
Abstract:
Interferometric principles are widely used in precision physics experiments and/or in advanced laboratory-based phase measurement systems. Phase resolution of such systems is a few orders of magnitude higher compared to that of standard mixer-based quadrature demodulators or lock-in technique. The first attempt of applying interferometric signal processing to transmitter-target-receiver based elec…
▽ More
Interferometric principles are widely used in precision physics experiments and/or in advanced laboratory-based phase measurement systems. Phase resolution of such systems is a few orders of magnitude higher compared to that of standard mixer-based quadrature demodulators or lock-in technique. The first attempt of applying interferometric signal processing to transmitter-target-receiver based electromagnetic (EM) surveying in geophysical prospecting is described. It is shown that it is possible to build an EM single carrier surveying system that is, firstly, immune to amplitude variations of both the primary and the secondary EM fields, and, secondly, can directly measure phase variations between the primary and secondary EM fields. Its inherent phase noise floor, if limited by the interferometer itself, can be as low as tens of nanoradians/\surdHz or below -140 dBc/\surdHz level. A practical example of an EM gradiometric surveying system based on an interferometric principle and operating in the Extremely Low Frequency (ELF) range, is presented. The system has been tested in regional outback Australia, in the presence of a highly conducting overburden, in the search of a nickel sulphide deposit.
Key words: EM gradiometer, interferometric methods, geophysical prospecting
△ Less
Submitted 21 September, 2011;
originally announced September 2011.
-
Direct string magnetic gradiometer for space applications
Authors:
Andrew Sunderland,
Alexey V. Veryaskin,
Wayne McRae,
Li Ju,
David G. Blair
Abstract:
Recently, a novel Direct String Magnetic Gradiometer (DSMG) has been developed, where a vibrating wire, driven by an AC current, is used as a single sensitive element. It is designed to directly measure the local off-diagonal components of the magnetic gradient tensor, Bxz, Byz and Bxy, provided the distance to an object creating magnetic anomalies is much larger than the length of the string. T…
▽ More
Recently, a novel Direct String Magnetic Gradiometer (DSMG) has been developed, where a vibrating wire, driven by an AC current, is used as a single sensitive element. It is designed to directly measure the local off-diagonal components of the magnetic gradient tensor, Bxz, Byz and Bxy, provided the distance to an object creating magnetic anomalies is much larger than the length of the string. This requirement is well satisfied in space, if the sensor is deployed from a satellite platform orbiting near the planet under surveillance. Current instruments operating at $1{kPa}$ pressure achieve sensitivity of $1.8 \times 10^{-10}{T}/{m}$ in the band $0.0001{Hz}$ to $0.1{Hz}$. In this paper we show that proposed modifications to the current gradiometer design, specifically aimed at the deployment in space, could have a magnetic gradient sensitivity better than $10^{-13}{T}/{m}/\sqrt{Hz}$ in the frequency range of interest for specific missions both for fundamental research and for such applications as geophysical exploration on Mars and other solar system planets. Also, by combining a few single-axis magnetic gradiometer modules, it is possible to deploy a full tensor magnetic gradiometer.
△ Less
Submitted 8 January, 2008;
originally announced January 2008.
-
Theory of Operation of Direct String Magnetic Gradiometer with Proportional and Integral Feedback
Authors:
Alexey Veryaskin
Abstract:
A quantitative theory of operation of a novel device, namely Direct String Magnetic Gradiometer (DSMG), is presented. The paper provides a detailed analysis of DSMG basic functions and measured quantities, represented in terms of physical parameters that are known either a priori or can be experimentally determined. It leaves a reasonable degree of freedom to further investigate some of the fine…
▽ More
A quantitative theory of operation of a novel device, namely Direct String Magnetic Gradiometer (DSMG), is presented. The paper provides a detailed analysis of DSMG basic functions and measured quantities, represented in terms of physical parameters that are known either a priori or can be experimentally determined. It leaves a reasonable degree of freedom to further investigate some of the finer detail of this new instrument based on experimental results coming both from the laboratory environment and from field trials. The analysis also allows us to quantitatively evaluate the error budget for an optimised DSMG.
△ Less
Submitted 4 May, 2008; v1 submitted 6 December, 2007;
originally announced December 2007.
-
On the combined gravity gradient modeling for applied geophysics
Authors:
Alexey Veryaskin,
Wayne McRae
Abstract:
Gravity gradiometry research and development has intensified in recent years to the extent that technologies providing a resolution of about 1 Eotvos per 1 sec average shall likely soon be available for multiple critical applications such as natural resources exploration, oil reservoir monitoring and defence establishment. Much of the content of this paper was composed a decade ago, and only min…
▽ More
Gravity gradiometry research and development has intensified in recent years to the extent that technologies providing a resolution of about 1 Eotvos per 1 sec average shall likely soon be available for multiple critical applications such as natural resources exploration, oil reservoir monitoring and defence establishment. Much of the content of this paper was composed a decade ago, and only minor modifications were required for the conclusions to be just as applicable today. In this paper we demonstrate how gravity gradient data can be modeled, and show some examples of how gravity gradient data can be combined in order to extract valuable information. In particular, this study demonstrates the importance of two gravity gradient components, Txz and Tyz which, when processed together, can provide more information on subsurface density contrasts than that derived solely from the vertical gravity gradient (Tzz).
△ Less
Submitted 2 July, 2008; v1 submitted 18 July, 2007;
originally announced July 2007.
