-
Reduced Order Hysteretic Flux Model for Transport Current Homogenization in Composite Superconductors
Authors:
Alexander Glock,
Julien Dular,
Arjan Verweij,
Mariusz Wozniak
Abstract:
In this paper, we present the Reduced Order Hysteretic Flux (ROHF) model to describe the relationship between time-varying transport current and internal magnetic flux for composite superconductors. The ROHF model is parametrized using reference simulations of the conductor response, after which it enables the computation of macroscopic quantities such as voltage and power loss without requiring d…
▽ More
In this paper, we present the Reduced Order Hysteretic Flux (ROHF) model to describe the relationship between time-varying transport current and internal magnetic flux for composite superconductors. The ROHF model is parametrized using reference simulations of the conductor response, after which it enables the computation of macroscopic quantities such as voltage and power loss without requiring detailed electromagnetic field solutions. It is therefore suitable for the homogenization of transport current effects in large-scale superconducting magnets, avoiding a fine discretization of the composite strand small scale structures, allowing to drastically reduce the computational effort. The approximation can be implemented either (i) as a rate-independent model, neglecting eddy current effects in the normal conducting matrix, or (ii) as a rate-dependent model, including those eddy current effects. In this paper, the complete modeling workflow, including parameter identification, coupling with the other fields (temperature and magnetic field), and post-processing of the results, is described and verified using a twisted multifilamentary strand as an example.
△ Less
Submitted 21 July, 2025;
originally announced July 2025.
-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
The Muon Collider
Authors:
Carlotta Accettura,
Simon Adrian,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aime',
Avni Aksoy,
Gian Luigi Alberghi,
Siobhan Alden,
Luca Alfonso,
Muhammad Ali,
Anna Rita Altamura,
Nicola Amapane,
Kathleen Amm,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Ludovica Aperio Bella,
Rob Appleby,
Artur Apresyan,
Pouya Asadi,
Mohammed Attia Mahmoud,
Bernhard Auchmann,
John Back,
Anthony Badea,
Kyu Jung Bae
, et al. (433 additional authors not shown)
Abstract:
Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an…
▽ More
Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an electron-positron collider, yielding a physics potential significantly greater than the sum of its individual parts. A high-energy muon collider is the natural next step in the exploration of fundamental physics after the HL-LHC and a natural complement to a future low-energy Higgs factory. Such a facility would significantly broaden the scope of particle colliders, engaging the many frontiers of the high energy community.
The last European Strategy for Particle Physics Update and later the Particle Physics Project Prioritisation Panel in the US requested a study of the muon collider, which is being carried on by the International Muon Collider Collaboration. In this comprehensive document we present the physics case, the state of the work on accelerator design and technology, and propose an R\&D project that can make the muon collider a reality.
△ Less
Submitted 30 April, 2025;
originally announced April 2025.
-
Transient Finite Element Simulation of Accelerator Magnets Using Thermal Thin Shell Approximation
Authors:
Erik Schnaubelt,
Andrea Vitrano,
Mariusz Wozniak,
Emmanuele Ravaioli,
Arjan Verweij,
Sebastian Schöps
Abstract:
Thermal transient responses of superconducting magnets can be simulated using the finite element (FE) method. Some accelerator magnets use cables whose electric insulation is significantly thinner than the bare electric conductor. The FE discretisation of such geometries with high-quality meshes leads to many degrees of freedom. This increases the computational time, particularly since non-linear…
▽ More
Thermal transient responses of superconducting magnets can be simulated using the finite element (FE) method. Some accelerator magnets use cables whose electric insulation is significantly thinner than the bare electric conductor. The FE discretisation of such geometries with high-quality meshes leads to many degrees of freedom. This increases the computational time, particularly since non-linear material properties are involved. In this work, we propose to use a thermal thin-shell approximation (TSA) to improve the computational efficiency when solving the heat diffusion equation in two dimensions. We apply the method to compute the thermal transient response of superconducting accelerator magnets used for CERN's Large Hadron Collider (LHC) and High-Luminosity LHC. The TSA collapses thin electrical insulation layers into lines while accurately representing the thermal gradient across the insulation's thickness. The TSA is implemented in the multipole module of the open-source Finite Element Quench Simulator (FiQuS), which can generate the multipole magnet models programmatically from input text files. First, the TSA approach is verified by comparison to classical FE simulations with meshed surface insulation regions for a simple block of four cables and a detailed model of the MBH dipole. The results show that the TSA approach reduces the computational time significantly while preserving the accuracy of the solution. Second, the quench heater (QH) delay computed with the TSA method is compared to measurements for the MBH magnet. To this end, the thermal transient simulation is coupled to a magnetostatic solution to account for magneto-resistive effects. Third, the TSA's full capabilities are showcased in non-linear magneto-thermal simulations of several LHC and HL-LHC superconducting magnet models. The full source code, including all input files, is publicly available.
△ Less
Submitted 27 January, 2025;
originally announced January 2025.
-
Influence of Critical Current Distribution on Operation, Quench Detection and Protection of HTS Pancake Coils
Authors:
Mariusz Wozniak,
Erik Schnaubelt,
Sina Atalay,
Bernardo Bordini,
Julien Dular,
Tim Mulder,
Emmanuele Ravaioli,
Arjan Verweij
Abstract:
High-temperature superconductor (HTS) coated conductors (CC) are often wound into pancake coils with electrical insulation in-between the turns. The copper terminals are used for current injection and conduction cooling. An inherent variation of the critical current along the CC length results from its manufacturing process. This variation causes non-uniform heat generation, particularly when the…
▽ More
High-temperature superconductor (HTS) coated conductors (CC) are often wound into pancake coils with electrical insulation in-between the turns. The copper terminals are used for current injection and conduction cooling. An inherent variation of the critical current along the CC length results from its manufacturing process. This variation causes non-uniform heat generation, particularly when the coil is operated at a high fraction of the nominal critical current or when large critical current defects are present. The temperature distribution resulting from the balance between cooling and heating, in combination with the magnetic field and critical current distributions, determines whether a thermal runaway occurs. Accurately predicting the level of critical current defects that can be tolerated during conduction-cooled operation is difficult and requires a 3D coupled electromagnetic and thermal simulation. This paper presents the results of simulations that are performed with the open-source Finite Element Quench Simulator (FiQuS) tool developed at CERN as part of the STEAM framework. The 3D coupled magnetodynamic-thermal simulations are based on the H-phi formulation and use thin shell approximations, a CC homogenization and conduction-cooling. The critical current (Ic) is varied along the CC length. The effect of a single defect specified as a reduction of Ic along the CC length is investigated in terms of the coil's ability to reach and maintain the operating conditions. The Ic and length of the defect that results in a thermal runaway are analyzed in terms of defect location. In addition, a classical 1D scenario with a quench heater is studied. Both the local defect and the heater cases are compared in terms of the voltage signal available for quench detection. These cases result in very different requirements for quench detection, and their implications are discussed.
△ Less
Submitted 27 November, 2024;
originally announced November 2024.
-
Simulation of Rutherford Cable AC Loss and Magnetization with the Coupled Axial and Transverse Currents Method
Authors:
Julien Dular,
Fredrik Magnus,
Erik Schnaubelt,
Arjan Verweij,
Mariusz Wozniak
Abstract:
The coupled axial and transverse currents (CATI) method was recently introduced to model the AC loss and magnetization in twisted composite superconducting strands with low computational cost and high accuracy. This method involves two-dimensional finite element (FE) models coupled with circuit equations representing the periodicity of the strand. In this paper, we propose to adapt the CATI method…
▽ More
The coupled axial and transverse currents (CATI) method was recently introduced to model the AC loss and magnetization in twisted composite superconducting strands with low computational cost and high accuracy. This method involves two-dimensional finite element (FE) models coupled with circuit equations representing the periodicity of the strand. In this paper, we propose to adapt the CATI method to Rutherford cables, which are periodic structures made of transposed superconducting strands. We focus on reproducing the interstrand coupling currents flowing across contact resistances between the strands and we analyze the associated AC loss. We show that results of a reference three-dimensional FE model are accurately reproduced with a strongly reduced computational cost.
△ Less
Submitted 17 December, 2024; v1 submitted 20 November, 2024;
originally announced November 2024.
-
MuCol Milestone Report No. 5: Preliminary Parameters
Authors:
Carlotta Accettura,
Simon Adrian,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimé,
Avni Aksoy,
Gian Luigi Alberghi,
Siobhan Alden,
Luca Alfonso,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Rob Appleby,
Artur Apresyan,
Pouya Asadi,
Mohammed Attia Mahmoud,
Bernhard Auchmann,
John Back,
Anthony Badea,
Kyu Jung Bae,
E. J. Bahng,
Lorenzo Balconi,
Fabrice Balli,
Laura Bandiera
, et al. (369 additional authors not shown)
Abstract:
This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power…
▽ More
This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power consumption of the facility. The data is collected from a collaborative spreadsheet and transferred to overleaf.
△ Less
Submitted 5 November, 2024;
originally announced November 2024.
-
Reduced Order Hysteretic Magnetization Model for Composite Superconductors
Authors:
Julien Dular,
Arjan Verweij,
Mariusz Wozniak
Abstract:
In this paper, we propose the Reduced Order Hysteretic Magnetization (ROHM) model to describe the magnetization and instantaneous power loss of composite superconductors subject to time-varying magnetic fields. Once the parameters of the ROHM model are fixed based on reference simulations, it allows to directly compute the macroscopic response of composite superconductors without the need to solve…
▽ More
In this paper, we propose the Reduced Order Hysteretic Magnetization (ROHM) model to describe the magnetization and instantaneous power loss of composite superconductors subject to time-varying magnetic fields. Once the parameters of the ROHM model are fixed based on reference simulations, it allows to directly compute the macroscopic response of composite superconductors without the need to solve the detailed current density distribution. It can then be used as part of a homogenization method in large-scale superconducting models to significantly reduce the computational effort compared to detailed simulations. In this contribution, we focus on the case of a strand with twisted superconducting filaments subject to a time-varying transverse magnetic field. We propose two variations of the ROHM model: (i) a rate-independent model that reproduces hysteresis in the filaments, and (ii) a rate-dependent model that generalizes the first level by also reproducing dynamic effects due to coupling and eddy currents. We then describe the implementation and inclusion of the ROHM model in a finite element framework, discuss how to deduce the model parameters, and finally demonstrate the capabilities of the approach in terms of accuracy and efficiency over a wide range of excitation frequencies and amplitudes.
△ Less
Submitted 5 February, 2025; v1 submitted 20 September, 2024;
originally announced September 2024.
-
Energy Shift with Coupling (ESC): a new quench protection method
Authors:
Emmanuele Ravaioli,
Arjan Verweij,
Mariusz Wozniak
Abstract:
Quench protection of full-size high-field accelerator magnets poses significant challenges. Maintaining the hot-spot temperature and peak voltage-to-ground within acceptable limits requires a protection system that quickly transitions most of the coil turns to the normal state. Existing magnet protection technologies, such as quench protection heaters or the Coupling Loss Induced Quench system (CL…
▽ More
Quench protection of full-size high-field accelerator magnets poses significant challenges. Maintaining the hot-spot temperature and peak voltage-to-ground within acceptable limits requires a protection system that quickly transitions most of the coil turns to the normal state. Existing magnet protection technologies, such as quench protection heaters or the Coupling Loss Induced Quench system (CLIQ), have been successfully applied. However, they both present shortcomings since they require either thin insulation between the heaters and the magnet conductor or direct electrical connections to the magnet coil. A novel quench protection method, Energy Shift with Coupling (ESC), is presented which can achieve excellent quench protection performance without the above-mentioned drawbacks. ESC relies on normal-conducting auxiliary coils strongly magnetically coupled with the magnet coils to protect. Upon quench detection capacitive units connected across such coils introduce a high current change in the auxiliary coils causing a rapid shift of magnet stored energy from the magnet coils to the auxiliary coils. This has three beneficial effects: sudden reduction of ohmic loss in the normal zone of the magnet conductor, introduction of high transient losses in the magnet conductor, thus causing a quick transition to the normal state, and extraction of a part of the magnet stored energy to the auxiliary coils. The applicability of the ESC concept on an existing magnet design is analyzed with electromagnetic and thermal transient simulations performed with the STEAM-LEDET program. The advantages and disadvantages of ESC are discussed and compared to other conventional quench protection methods. Simulation results show that ESC can be applied to protect full-scale magnets with reasonable requirements in terms of size and location of the auxiliary coils and of capacitive unit parameters.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Interim report for the International Muon Collider Collaboration (IMCC)
Authors:
C. Accettura,
S. Adrian,
R. Agarwal,
C. Ahdida,
C. Aimé,
A. Aksoy,
G. L. Alberghi,
S. Alden,
N. Amapane,
D. Amorim,
P. Andreetto,
F. Anulli,
R. Appleby,
A. Apresyan,
P. Asadi,
M. Attia Mahmoud,
B. Auchmann,
J. Back,
A. Badea,
K. J. Bae,
E. J. Bahng,
L. Balconi,
F. Balli,
L. Bandiera,
C. Barbagallo
, et al. (362 additional authors not shown)
Abstract:
The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accele…
▽ More
The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider.
△ Less
Submitted 28 January, 2025; v1 submitted 17 July, 2024;
originally announced July 2024.
-
Parallel-in-Time Integration of Transient Phenomena in No-Insulation Superconducting Coils Using Parareal
Authors:
Erik Schnaubelt,
Mariusz Wozniak,
Julien Dular,
Idoia Cortes Garcia,
Arjan Verweij,
Sebastian Schöps
Abstract:
High-temperature superconductors (HTS) have the potential to enable magnetic fields beyond the current limits of low-temperature superconductors in applications like accelerator magnets. However, the design of HTS-based magnets requires computationally demanding transient multi-physics simulations with highly non-linear material properties. To reduce the solution time, we propose using Parareal (P…
▽ More
High-temperature superconductors (HTS) have the potential to enable magnetic fields beyond the current limits of low-temperature superconductors in applications like accelerator magnets. However, the design of HTS-based magnets requires computationally demanding transient multi-physics simulations with highly non-linear material properties. To reduce the solution time, we propose using Parareal (PR) for parallel-in-time magneto-thermal simulation of magnets based on HTS, particularly, no-insulation coils without turn-to-turn insulation. We propose extending the classical PR method to automatically find a time partitioning using a first coarse adaptive propagator. The proposed PR method is shown to reduce the computing time when fine engineering tolerances are required despite the highly nonlinear character of the problem. The full software stack used is open-source.
△ Less
Submitted 20 April, 2024;
originally announced April 2024.
-
Coupled Axial and Transverse Currents Method for Finite Element Modelling of Periodic Superconductors
Authors:
Julien Dular,
Fredrik Magnus,
Erik Schnaubelt,
Arjan Verweij,
Mariusz Wozniak
Abstract:
In this paper, we propose the Coupled Axial and Transverse currents (I) (CATI) method, as an efficient and accurate finite element approach for modelling the electric and magnetic behavior of periodic composite superconducting conductors. The method consists of a pair of two-dimensional models coupled via circuit equations to account for the conductor geometrical periodicity. This allows to captur…
▽ More
In this paper, we propose the Coupled Axial and Transverse currents (I) (CATI) method, as an efficient and accurate finite element approach for modelling the electric and magnetic behavior of periodic composite superconducting conductors. The method consists of a pair of two-dimensional models coupled via circuit equations to account for the conductor geometrical periodicity. This allows to capture three-dimensional effects with two-dimensional models and leads to a significant reduction in computational time compared to conventional three-dimensional models. After presenting the method in detail, we verify it by comparison with reference finite element models, focussing on its application to twisted multifilamentary superconducting strands. In particular, we show that the CATI method captures the transition from uncoupled to coupled filaments, with accurate calculation of the interfilament coupling time constant. We then illustrate the capabilities of the method by generating a detailed loss map and magnetization curves of given strand types for a range of external transverse magnetic field excitations, with and without transport current.
△ Less
Submitted 24 June, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Magneto-Thermal Thin Shell Approximation for 3D Finite Element Analysis of No-Insulation Coils
Authors:
Erik Schnaubelt,
Sina Atalay,
Mariusz Wozniak,
Julien Dular,
Christophe Geuzaine,
Benoît Vanderheyden,
Nicolas Marsic,
Arjan Verweij,
Sebastian Schöps
Abstract:
For finite element (FE) analysis of no-insulation (NI) high-temperature superconducting (HTS) pancake coils, the high aspect ratio of the turn-to-turn contact layer (T2TCL) leads to meshing difficulties which result in either poor quality mesh elements resulting in a decrease of the solution accuracy or a high number of degrees of freedom. We proposed to mitigate this issue by collapsing the T2TCL…
▽ More
For finite element (FE) analysis of no-insulation (NI) high-temperature superconducting (HTS) pancake coils, the high aspect ratio of the turn-to-turn contact layer (T2TCL) leads to meshing difficulties which result in either poor quality mesh elements resulting in a decrease of the solution accuracy or a high number of degrees of freedom. We proposed to mitigate this issue by collapsing the T2TCL volume into a surface and using a so-called thin shell approximation (TSA). Previously, two TSA have been introduced, one to solve the heat equation and the other for an $\vec{H}-φ$ magnetodynamic formulation.
In this work, we propose to combine the magnetodynamic and thermal TSA to create a coupled magneto-thermal TSA for three-dimensional FE analysis. Particular attention is paid to the detailed derivation of the coupling terms. In the context of NI HTS pancake coils, the TSA represents the electric and thermal contact resistance of the T2TCL. For the HTS coated conductor (CC) itself, an anisotropic homogenization is used which represents its multi-layered structure. In axial and azimuthal direction, it resolves the current sharing between the HTS and other layers of the CC. The coupled TSA formulation is verified against a reference model with volumetric T2TCL. The coupled TSA is shown to significantly reduce the solution time as well as the manual effort required for high-quality meshes of the T2TCL. The implementation is open-source and a reference implementation is made publicly available.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Proof of Concept of High-Temperature Superconducting Screens for Magnetic Field-Error Cancellation in Accelerator Magnets
Authors:
L. Bortot,
M. Mentink,
C. Petrone,
J. Van Nugteren,
G. Deferne,
T. Koettig,
G. Kirby,
M. Pentella,
J. C. Perez,
F. O. Pincot,
G. De Rijk,
S. Russenschuck,
A. P. Verweij,
S. Schöps
Abstract:
Accelerators magnets must have minimal magnetic field imperfections for reducing particle-beam instabilities. In the case of coils made of high-temperature superconducting (HTS) tapes, the field imperfections from persistent currents need to be carefully evaluated. In this paper we study the use of superconducting screens based on HTS tapes for reducing the magnetic field imperfections in accelera…
▽ More
Accelerators magnets must have minimal magnetic field imperfections for reducing particle-beam instabilities. In the case of coils made of high-temperature superconducting (HTS) tapes, the field imperfections from persistent currents need to be carefully evaluated. In this paper we study the use of superconducting screens based on HTS tapes for reducing the magnetic field imperfections in accelerator magnets. The screens exploit the magnetization by persistent currents to cancel out the magnetic field error. The screens are aligned with the main field components, such that only the undesired field components are compensated. The screens are passive, self-regulating, and do not require any external source of energy. Measurements in liquid nitrogen at 77 Kelvin show for dipole-field configurations a significant reduction of the magnetic-field error up to a factor of four. The residual error is explained via numerical simulations, accounting for the geometrical imperfections in the HTS screens, thus achieving satisfactory agreement with experimental results. Simulations show that if screens are increased in width and thickness, and operated at 4.5 Kelvin, field errors may be eliminated almost entirely for the typical excitation cycles of accelerator magnets.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
Numerical Analysis of the Screening Current-Induced Magnetic Field in the HTS Insert Dipole Magnet Feather-M2.1-2
Authors:
Lorenzo Bortot,
Matthias Mentink,
Carlo Petrone,
Jeroen Van Nugteren,
Glyn Kirby,
Mariano Pentella,
Arjan Verweij,
Sebastian Schöps
Abstract:
Screening currents are field-induced dynamic phenomena which occur in superconducting materials, leading to persistent magnetization. Such currents are of importance in ReBCO tapes, where the large size of the superconducting filaments gives rise to strong magnetization phenomena. In consequence, superconducting accelerator magnets based on ReBCO tapes might experience a relevant degradation of th…
▽ More
Screening currents are field-induced dynamic phenomena which occur in superconducting materials, leading to persistent magnetization. Such currents are of importance in ReBCO tapes, where the large size of the superconducting filaments gives rise to strong magnetization phenomena. In consequence, superconducting accelerator magnets based on ReBCO tapes might experience a relevant degradation of the magnetic field quality in the magnet aperture, eventually leading to particle beam instabilities. Thus, persistent magnetization phenomena need to be accurately evaluated. In this paper, the 2D finite element model of the Feather-M2.1-2 magnet is presented. The model is used to analyze the influence of the screening current-induced magnetic field on the field quality in the magnet aperture. The model relies on a coupled field formulation for eddy current problems in time-domain. The formulation is introduced and verified against theoretical references. Then, the numerical model of the Feather-M2.1-2 magnet is detailed, highlighting the key assumptions and simplifications. The numerical results are discussed and validated with available magnetic measurements. A satisfactory agreement is found, showing the capability of the numerical tool in providing accurate analysis of the dynamic behavior of the Feather-M2.1-2 magnet.
△ Less
Submitted 6 January, 2021; v1 submitted 19 May, 2020;
originally announced May 2020.
-
Fast Failures in the LHC and the future High Luminosity LHC*
Authors:
B. Lindstrom,
P. Bélanger,
L. Bortot,
R. Denz,
M. Mentink,
E. Ravaioli,
F. Rodriguez Mateos,
R. Schmidt,
J. Uythoven,
M. Valette,
A. Verweij,
C. Wiesner,
D. Wollmann,
M. Zerlauth
Abstract:
An energy of $362\:\text{MJ}$ is stored in each of the two LHC proton beams for nominal beam parameters. This will be further increased to about $700\:\text{MJ}$ in the future High Luminosity LHC (HL-LHC) and uncontrolled beam losses represent a significant hazard for the integrity and safe operation of the machine. In this paper, a number of failure mechanisms that can lead to a fast increase of…
▽ More
An energy of $362\:\text{MJ}$ is stored in each of the two LHC proton beams for nominal beam parameters. This will be further increased to about $700\:\text{MJ}$ in the future High Luminosity LHC (HL-LHC) and uncontrolled beam losses represent a significant hazard for the integrity and safe operation of the machine. In this paper, a number of failure mechanisms that can lead to a fast increase of beam losses are analyzed. Most critical are failures in the magnet protection system, namely the quench heaters and a novel protection system called Coupling-Loss Induced Quench (CLIQ). An important outcome is that magnet protection has to be evaluated for its impact on the beam and designed accordingly. In particular, CLIQ, which is to protect the new HL-LHC triplet magnets, constitutes the fastest known failure in the LHC if triggered spuriously. A schematic change of CLIQ to mitigate the hazard is presented.
A loss of the Beam-Beam Kick due to the extraction of one beam is another source of beam losses with a fast onset. A significantly stronger impact is expected in the upcoming LHC Run III and HL-LHC as compared to the current LHC, mainly due to the increased bunch intensity. Its criticality and mitigation methods are discussed.
It is shown that symmetric quenches in the superconducting magnets for the final focusing triplet can have a significant impact on the beam on short timescales. The impact on the beam due to failures of the Beam-Beam Compensating Wires as well as coherent excitations by the transverse beam damper are also discussed.
△ Less
Submitted 12 May, 2020; v1 submitted 9 May, 2020;
originally announced May 2020.
-
A Coupled A-H Formulation for Magneto-Thermal Transients in High-Temperature Superconducting Magnets
Authors:
Lorenzo Bortot,
Bernhard Auchmann,
Idoia Cortes Garcia,
Herbert De Gersem,
Michał Maciejewski,
Matthias Mentink,
Sebastian Schöps,
Jeroen Van Nugteren,
Arjan Verweij
Abstract:
The application of high-temperature superconductors to accelerator magnets for future particle colliders is under study. Numerical methods are crucial for an accurate evaluation of the complex dynamical behavior of the magnets, especially concerning the magnetic field quality and thermal behavior. We present a coupled $\textbf{A}$-$\textbf{H}$ field formulation for the analysis of magneto-thermal…
▽ More
The application of high-temperature superconductors to accelerator magnets for future particle colliders is under study. Numerical methods are crucial for an accurate evaluation of the complex dynamical behavior of the magnets, especially concerning the magnetic field quality and thermal behavior. We present a coupled $\textbf{A}$-$\textbf{H}$ field formulation for the analysis of magneto-thermal transients in accelerator magnets. The magnetic field strength $\textbf{H}$ accounts for the eddy current problem in the source regions containing the superconducting domains, while the magnetic vector potential $\textbf{A}$ represents the magnetoquasistatic problem in the normal and non-conducting domains. Furthermore, we include a slab approximation for the source regions, making the formulation suitable for large scale models composed of thousands of tapes. In this work, the relevant equations are derived and discussed, with emphasis on the coupling conditions. The weak formulation is derived, and numerical results are provided in order to both, verify the formulation and scale it to the size of an accelerator magnet.
△ Less
Submitted 17 January, 2020; v1 submitted 7 September, 2019;
originally announced September 2019.
-
STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
Authors:
Lorenzo Bortot,
Bernhard Auchmann,
Idoia Cortes Garcia,
Alejando M. Fernando Navarro,
Michał Maciejewski,
Matthias Mentink,
Marco Prioli,
Emmanuele Ravaioli,
Sebastian Schöps,
Arjan Verweij
Abstract:
Simulating the transient effects occurring in superconducting accelerator magnet circuits requires including the mutual electro-thermo-dynamic interaction among the circuit elements, such as power converters, magnets, and protection systems. Nevertheless, the numerical analysis is traditionally done separately for each element in the circuit, leading to possible non-consistent results. We present…
▽ More
Simulating the transient effects occurring in superconducting accelerator magnet circuits requires including the mutual electro-thermo-dynamic interaction among the circuit elements, such as power converters, magnets, and protection systems. Nevertheless, the numerical analysis is traditionally done separately for each element in the circuit, leading to possible non-consistent results. We present STEAM, a hierarchical co-simulation framework featuring the waveform relaxation method. The framework simulates a complex system as a composition of simpler, independent models that exchange information. The convergence of the coupling algorithm ensures the consistency of the solution. The modularity of the framework allows integrating models developed with both proprietary and in-house tools. The framework implements a user-customizable hierarchical algorithm to schedule how models participate to the co-simulation, for the purpose of using computational resources efficiently. As a case study, a quench scenario is co-simulated for the inner triplet circuit for the High Luminosity upgrade of the LHC at CERN.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Coupling of Magneto-Thermal and Mechanical Superconducting Magnet Models by Means of Mesh-Based Interpolation
Authors:
Michał Maciejewski,
Pascal Bayrasy,
Klaus Wolf,
Michał Wilczek,
Bernhard Auchmann,
Tina Griesemer,
Lorenzo Bortot,
Marco Prioli,
Alejandro Manuel Fernandez Navarro,
Sebastian Schöps,
Idoia Cortes Garcia,
Arjan Verweij
Abstract:
In this paper we present an algorithm for the coupling of magneto-thermal and mechanical finite element models representing superconducting accelerator magnets. The mechanical models are used during the design of the mechanical structure as well as the optimization of the magnetic field quality under nominal conditions. The magneto-thermal models allow for the analysis of transient phenomena occur…
▽ More
In this paper we present an algorithm for the coupling of magneto-thermal and mechanical finite element models representing superconducting accelerator magnets. The mechanical models are used during the design of the mechanical structure as well as the optimization of the magnetic field quality under nominal conditions. The magneto-thermal models allow for the analysis of transient phenomena occurring during quench initiation, propagation, and protection. Mechanical analysis of quenching magnets is of high importance considering the design of new protection systems and the study of new superconductor types. We use field/circuit coupling to determine temperature and electromagnetic force evolution during the magnet discharge. These quantities are provided as a load to existing mechanical models. The models are discretized with different meshes and, therefore, we employ a mesh-based interpolation method to exchange coupled quantities. The coupling algorithm is illustrated with a simulation of a mechanical response of a standalone high-field dipole magnet protected with CLIQ (Coupling-Loss Induced Quench) technology.
△ Less
Submitted 29 December, 2017;
originally announced December 2017.
-
A 2-D Finite-Element Model for Electro-Thermal Transients in Accelerator Magnets
Authors:
Lorenzo Bortot,
Bernhard Auchmann,
Idoia Cortes Garcia,
Alejandro Manuel Fernandez Navarro,
Michal Maciejewski,
Marco Prioli,
Sebastian Schöps,
Arjan Verweij
Abstract:
Superconducting accelerator magnets require sophisticated monitoring and means of protection due to the large energy stored in the magnetic field. Numerical simulations play a crucial role in understanding transient phenomena occurring within the magnet, and can, therefore, help to prevent disruptive consequences. We present a 2-D FEM model for the simulation of electro-thermal transients occurrin…
▽ More
Superconducting accelerator magnets require sophisticated monitoring and means of protection due to the large energy stored in the magnetic field. Numerical simulations play a crucial role in understanding transient phenomena occurring within the magnet, and can, therefore, help to prevent disruptive consequences. We present a 2-D FEM model for the simulation of electro-thermal transients occurring in superconducting accelerator magnets. The magnetoquasistatic problem is solved with a modified magnetic vector potential formulation, where the cable eddy currents are resolved in terms of their equivalent magnetization. The heat balance equation is then investigated, and the relevant heat sources are discussed. The model implements a two-port component interface and is resolved, as part of an electrical circuit, in a cooperative simulation scheme with a lumped-parameter network.
△ Less
Submitted 5 December, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Application of the Waveform Relaxation Technique to the Co-Simulation of Power Converter Controller and Electrical Circuit Models
Authors:
Michał Maciejewski,
Idoia Cortes Garcia,
Sebastian Schöps,
Bernhard Auchmann,
Lorenzo Bortot,
Marco Prioli,
Arjan Verweij
Abstract:
In this paper we present the co-simulation of a PID class power converter controller and an electrical circuit by means of the waveform relaxation technique. The simulation of the controller model is characterized by a fixed-time stepping scheme reflecting its digital implementation, whereas a circuit simulation usually employs an adaptive time stepping scheme in order to account for a wide range…
▽ More
In this paper we present the co-simulation of a PID class power converter controller and an electrical circuit by means of the waveform relaxation technique. The simulation of the controller model is characterized by a fixed-time stepping scheme reflecting its digital implementation, whereas a circuit simulation usually employs an adaptive time stepping scheme in order to account for a wide range of time constants within the circuit model. In order to maintain the characteristic of both models as well as to facilitate model replacement, we treat them separately by means of input/output relations and propose an application of a waveform relaxation algorithm. Furthermore, the maximum and minimum number of iterations of the proposed algorithm are mathematically analyzed. The concept of controller/circuit coupling is illustrated by an example of the co-simulation of a PI power converter controller and a model of the main dipole circuit of the Large Hadron Collider.
△ Less
Submitted 10 April, 2017;
originally announced April 2017.
-
Optimized Field/Circuit Coupling for the Simulation of Quenches in Superconducting Magnets
Authors:
Idoia Cortes Garcia,
Sebastian Schöps,
Michał Maciejewski,
Lorenzo Bortot,
Marco Prioli,
Bernhard Auchmann,
Arjan Verweij
Abstract:
In this paper, we propose an optimized field/circuit coupling approach for the simulation of magnetothermal transients in superconducting magnets. The approach improves the convergence of the iterative coupling scheme between a magnetothermal partial differential model and an electrical lumped-element circuit. Such a multi-physics, multi-rate and multi-scale problem requires a consistent formulati…
▽ More
In this paper, we propose an optimized field/circuit coupling approach for the simulation of magnetothermal transients in superconducting magnets. The approach improves the convergence of the iterative coupling scheme between a magnetothermal partial differential model and an electrical lumped-element circuit. Such a multi-physics, multi-rate and multi-scale problem requires a consistent formulation and a dedicated framework to tackle the challenging transient effects occurring at both circuit and magnet level during normal operation and in case of faults. We derive an equivalent magnet model at the circuit side for the linear and the non-linear settings and discuss the convergence of the overall scheme in the framework of optimized Schwarz methods. The efficiency of the developed approach is illustrated by a numerical example of an accelerator dipole magnet with accompanying protection system.
△ Less
Submitted 6 July, 2017; v1 submitted 3 February, 2017;
originally announced February 2017.
-
Testing Beam-Induced Quench Levels of LHC Superconducting Magnets
Authors:
B. Auchmann,
T. Baer,
M. Bednarek,
G. Bellodi,
C. Bracco,
R. Bruce,
F. Cerutti,
V. Chetvertkova,
B. Dehning,
P. P. Granieri,
W. Hofle,
E. B. Holzer,
A. Lechner,
E. Nebot Del Busto,
A. Priebe,
S. Redaelli,
B. Salvachua,
M. Sapinski,
R. Schmidt,
N. Shetty,
E. Skordis,
M. Solfaroli,
J. Steckert,
D. Valuch,
A. Verweij
, et al. (3 additional authors not shown)
Abstract:
In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not…
▽ More
In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not been a single beam- induced quench during normal collider operation with stored beam. The conditions, however, are expected to become much more challenging after the long LHC shutdown. The magnets will be operating at near nominal currents, and in the presence of high energy and high intensity beams with a stored energy of up to 362 MJ per beam. In this paper we summarize our efforts to understand the quench levels of LHC superconducting magnets. We describe beam-loss events and dedicated experiments with beam, as well as the simulation methods used to reproduce the observable signals. The simulated energy deposition in the coils is compared to the quench levels predicted by electro-thermal models, thus allowing to validate and improve the models which are used to set beam-dump thresholds on beam-loss monitors for Run 2.
△ Less
Submitted 26 June, 2015; v1 submitted 18 February, 2015;
originally announced February 2015.
