Showing 1–11 of 11 results for author: Veeraraghavan, A

When are Diffusion Priors Helpful in Sparse Reconstruction? A Study with Sparse-view CT

Authors: Matt Y. Cheung, Sophia Zorek, Tucker J. Netherton, Laurence E. Court, Sadeer Al-Kindi, Ashok Veeraraghavan, Guha Balakrishnan

Abstract: Diffusion models demonstrate state-of-the-art performance on image generation, and are gaining traction for sparse medical image reconstruction tasks. However, compared to classical reconstruction algorithms relying on simple analytical priors, diffusion models have the dangerous property of producing realistic looking results \emph{even when incorrect}, particularly with few observations. We inve… ▽ More Diffusion models demonstrate state-of-the-art performance on image generation, and are gaining traction for sparse medical image reconstruction tasks. However, compared to classical reconstruction algorithms relying on simple analytical priors, diffusion models have the dangerous property of producing realistic looking results \emph{even when incorrect}, particularly with few observations. We investigate the utility of diffusion models as priors for image reconstruction by varying the number of observations and comparing their performance to classical priors (sparse and Tikhonov regularization) using pixel-based, structural, and downstream metrics. We make comparisons on low-dose chest wall computed tomography (CT) for fat mass quantification. First, we find that classical priors are superior to diffusion priors when the number of projections is ``sufficient''. Second, we find that diffusion priors can capture a large amount of detail with very few observations, significantly outperforming classical priors. However, they fall short of capturing all details, even with many observations. Finally, we find that the performance of diffusion priors plateau after extremely few ($\approx$10-15) projections. Ultimately, our work highlights potential issues with diffusion-based sparse reconstruction and underscores the importance of further investigation, particularly in high-stakes clinical settings. △ Less

Submitted 4 February, 2025; originally announced February 2025.

Comments: Accepted at IEEE ISBI 2025, 5 pages, 2 figures, 1 table

Metric-Guided Conformal Bounds for Probabilistic Image Reconstruction

Authors: Matt Y Cheung, Tucker J Netherton, Laurence E Court, Ashok Veeraraghavan, Guha Balakrishnan

Abstract: Modern deep learning reconstruction algorithms generate impressively realistic scans from sparse inputs, but can often produce significant inaccuracies. This makes it difficult to provide statistically guaranteed claims about the true state of a subject from scans reconstructed by these algorithms. In this study, we propose a framework for computing provably valid prediction bounds on claims deriv… ▽ More Modern deep learning reconstruction algorithms generate impressively realistic scans from sparse inputs, but can often produce significant inaccuracies. This makes it difficult to provide statistically guaranteed claims about the true state of a subject from scans reconstructed by these algorithms. In this study, we propose a framework for computing provably valid prediction bounds on claims derived from probabilistic black-box image reconstruction algorithms. The key insights behind our framework are to represent reconstructed scans with a derived clinical metric of interest, and to calibrate bounds on the ground truth metric with conformal prediction (CP) using a prior calibration dataset. These bounds convey interpretable feedback about the subject's state, and can also be used to retrieve nearest-neighbor reconstructed scans for visual inspection. We demonstrate the utility of this framework on sparse-view computed tomography (CT) for fat mass quantification and radiotherapy planning tasks. Results show that our framework produces bounds with better semantical interpretation than conventional pixel-based bounding approaches. Furthermore, we can flag dangerous outlier reconstructions that look plausible but have statistically unlikely metric values. △ Less

Submitted 3 March, 2025; v1 submitted 23 April, 2024; originally announced April 2024.

Comments: 11 pages, 4 figures, 1 table, 2 algorithms. Code available at https://github.com/matthewyccheung/conformal-metric. Previously titled "Metric-guided Image Reconstruction Bounds via Conformal Prediction"

Broadband Thermal Imaging using Meta-Optics

Authors: Luocheng Huang, Zheyi Han, Anna Wirth-Singh, Vishwanath Saragadam, Saswata Mukherjee, Johannes E. Fröch, Quentin A. A. Tanguy, Joshua Rollag, Ricky Gibson, Joshua R. Hendrickson, Phillip W. C. Hon, Orrin Kigner, Zachary Coppens, Karl F. Böhringer, Ashok Veeraraghavan, Arka Majumdar

Abstract: Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic aberrations, limiting their utilities. Here, we employ inverse-design to create broadband meta-optics operating in the long-wave infrared (LWIR) regime (8 - 12… ▽ More Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic aberrations, limiting their utilities. Here, we employ inverse-design to create broadband meta-optics operating in the long-wave infrared (LWIR) regime (8 - 12 $μ$m). Via a deep-learning assisted multi-scale differentiable framework that links meta-atoms to the phase, we maximize the wavelength-averaged volume under the modulation transfer function (MTF) of the meta-optics. Our design framework merges local phase-engineering via meta-atoms and global engineering of the scatterer within a single pipeline. We corroborate our design by fabricating and experimentally characterizing all-silicon LWIR meta-optics. Our engineered meta-optic is complemented by a simple computational backend that dramatically improves the quality of the captured image. We experimentally demonstrate a six-fold improvement of the wavelength-averaged Strehl ratio over the traditional hyperboloid metalens for broadband imaging. △ Less

Submitted 5 September, 2023; v1 submitted 21 July, 2023; originally announced July 2023.

Comments: 28 pages, 12 figures

MSC Class: 78A10

Foveated Thermal Computational Imaging in the Wild Using All-Silicon Meta-Optics

Authors: Vishwanath Saragadam, Zheyi Han, Vivek Boominathan, Luocheng Huang, Shiyu Tan, Johannes E. Fröch, Karl F. Böhringer, Richard G. Baraniuk, Arka Majumdar, Ashok Veeraraghavan

Abstract: Foveated imaging provides a better tradeoff between situational awareness (field of view) and resolution and is critical in long-wavelength infrared regimes because of the size, weight, power, and cost of thermal sensors. We demonstrate computational foveated imaging by exploiting the ability of a meta-optical frontend to discriminate between different polarization states and a computational backe… ▽ More Foveated imaging provides a better tradeoff between situational awareness (field of view) and resolution and is critical in long-wavelength infrared regimes because of the size, weight, power, and cost of thermal sensors. We demonstrate computational foveated imaging by exploiting the ability of a meta-optical frontend to discriminate between different polarization states and a computational backend to reconstruct the captured image/video. The frontend is a three-element optic: the first element which we call the "foveal" element is a metalens that focuses s-polarized light at a distance of $f_1$ without affecting the p-polarized light; the second element which we call the "perifoveal" element is another metalens that focuses p-polarized light at a distance of $f_2$ without affecting the s-polarized light. The third element is a freely rotating polarizer that dynamically changes the mixing ratios between the two polarization states. Both the foveal element (focal length = 150mm; diameter = 75mm), and the perifoveal element (focal length = 25mm; diameter = 25mm) were fabricated as polarization-sensitive, all-silicon, meta surfaces resulting in a large-aperture, 1:6 foveal expansion, thermal imaging capability. A computational backend then utilizes a deep image prior to separate the resultant multiplexed image or video into a foveated image consisting of a high-resolution center and a lower-resolution large field of view context. We build a first-of-its-kind prototype system and demonstrate 12 frames per second real-time, thermal, foveated image, and video capture in the wild. △ Less

Submitted 12 December, 2022; originally announced December 2022.

Deep-3D Microscope: 3D volumetric microscopy of thick scattering samples using a wide-field microscope and machine learning

Authors: Bowen Li, Shiyu Tan, Jiuyang Dong, Xiaocong Lian, Yongbing Zhang, Xiangyang Ji, Ashok Veeraraghavan

Abstract: Confocal microscopy is the standard approach for obtaining volumetric images of a sample with high axial and lateral resolution, especially when dealing with scattering samples. Unfortunately, a confocal microscope is quite expensive compared to traditional microscopes. In addition, the point scanning in a confocal leads to slow imaging speed and photobleaching due to the high dose of laser energy… ▽ More Confocal microscopy is the standard approach for obtaining volumetric images of a sample with high axial and lateral resolution, especially when dealing with scattering samples. Unfortunately, a confocal microscope is quite expensive compared to traditional microscopes. In addition, the point scanning in a confocal leads to slow imaging speed and photobleaching due to the high dose of laser energy. In this paper, we demonstrate how the advances in machine learning can be exploited to "teach" a traditional wide-field microscope, one that's available in every lab, into producing 3D volumetric images like a confocal. The key idea is to obtain multiple images with different focus settings using a wide-field microscope and use a 3D Generative Adversarial Network (GAN) based neural network to learn the mapping between the blurry low-contrast image stack obtained using wide-field and the sharp, high-contrast images obtained using a confocal. After training the network with widefield-confocal image pairs, the network can reliably and accurately reconstruct 3D volumetric images that rival confocal in terms of its lateral resolution, z-sectioning and image contrast. Our experimental results demonstrate generalization ability to handle unseen data, stability in the reconstruction results, high spatial resolution even when imaging thick ($\sim40$ microns) highly-scattering samples. We believe that such learning-based-microscopes have the potential to bring confocal quality imaging to every lab that has a wide-field microscope. △ Less

Submitted 14 October, 2021; originally announced October 2021.

CodedStereo: Learned Phase Masks for Large Depth-of-field Stereo

Authors: Shiyu Tan, Yicheng Wu, Shoou-I Yu, Ashok Veeraraghavan

Abstract: Conventional stereo suffers from a fundamental trade-off between imaging volume and signal-to-noise ratio (SNR) -- due to the conflicting impact of aperture size on both these variables. Inspired by the extended depth of field cameras, we propose a novel end-to-end learning-based technique to overcome this limitation, by introducing a phase mask at the aperture plane of the cameras in a stereo ima… ▽ More Conventional stereo suffers from a fundamental trade-off between imaging volume and signal-to-noise ratio (SNR) -- due to the conflicting impact of aperture size on both these variables. Inspired by the extended depth of field cameras, we propose a novel end-to-end learning-based technique to overcome this limitation, by introducing a phase mask at the aperture plane of the cameras in a stereo imaging system. The phase mask creates a depth-dependent point spread function, allowing us to recover sharp image texture and stereo correspondence over a significantly extended depth of field (EDOF) than conventional stereo. The phase mask pattern, the EDOF image reconstruction, and the stereo disparity estimation are all trained together using an end-to-end learned deep neural network. We perform theoretical analysis and characterization of the proposed approach and show a 6x increase in volume that can be imaged in simulation. We also build an experimental prototype and validate the approach using real-world results acquired using this prototype system. △ Less

Submitted 9 April, 2021; originally announced April 2021.

Comments: Accepted to CVPR 2021 as an oral presentation

High Resolution, Deep Imaging Using Confocal Time-of-flight Diffuse Optical Tomography

Authors: Yongyi Zhao, Ankit Raghuram, Hyun K. Kim, Andreas H. Hielscher, Jacob T. Robinson, Ashok Veeraraghavan

Abstract: Light scattering by tissue severely limits how deep beneath the surface one can image, and the spatial resolution one can obtain from these images. Diffuse optical tomography (DOT) is one of the most powerful techniques for imaging deep within tissue -- well beyond the conventional $\sim$10-15 mean scattering lengths tolerated by ballistic imaging techniques such as confocal and two-photon microsc… ▽ More Light scattering by tissue severely limits how deep beneath the surface one can image, and the spatial resolution one can obtain from these images. Diffuse optical tomography (DOT) is one of the most powerful techniques for imaging deep within tissue -- well beyond the conventional $\sim$10-15 mean scattering lengths tolerated by ballistic imaging techniques such as confocal and two-photon microscopy. Unfortunately, existing DOT systems are limited, achieving only centimeter-scale resolution. Furthermore, they suffer from slow acquisition times and slow reconstruction speeds making real-time imaging infeasible. We show that time-of-flight diffuse optical tomography (ToF-DOT) and its confocal variant (CToF-DOT), by exploiting the photon travel time information, allow us to achieve millimeter spatial resolution in the highly scattered diffusion regime ($> 50 $ mean free paths). In addition, we demonstrate two additional innovations: focusing on confocal measurements, and multiplexing the illumination sources allow us to significantly reduce the measurement acquisition time. Finally, we rely on a novel convolutional approximation that allows us to develop a fast reconstruction algorithm, achieving a 100$\times$ speedup in reconstruction time compared to traditional DOT reconstruction techniques. Together, we believe that these technical advances serve as the first step towards real-time, millimeter resolution, deep tissue imaging using DOT. △ Less

Submitted 27 May, 2021; v1 submitted 27 January, 2021; originally announced January 2021.

Comments: The updated version includes edits made to our paper in response to suggestions from reviewers. These changes include: updated 3D image reconstruction results, additional comments on prior work, and further explanations of the linear model. In addition, we made a correction to figure 9, relabeling the x-axis to the correct scale. Finally, we also updated our acknowledgements

Signal Processing Based Pile-up Compensation for Gated Single-Photon Avalanche Diodes

Authors: Adithya K. Pediredla, Aswin C. Sankaranarayanan, Mauro Buttafava, Alberto Tosi, Ashok Veeraraghavan

Abstract: Single-photon avalanche diode (SPAD) based transient imaging suffers from an aberration called pile-up. When multiple photons arrive within a single repetition period of the illuminating laser, the SPAD records only the arrival of the first photon; this leads to a bias in the recorded light transient wherein the transient response at later time-instants are under-estimated. An unfortunate conseque… ▽ More Single-photon avalanche diode (SPAD) based transient imaging suffers from an aberration called pile-up. When multiple photons arrive within a single repetition period of the illuminating laser, the SPAD records only the arrival of the first photon; this leads to a bias in the recorded light transient wherein the transient response at later time-instants are under-estimated. An unfortunate consequence of this is the need to operate the illumination at low-power levels to reduce the probability of multiple photons returning in a single period. Operating the laser at low power results in either low signal-to-noise ratio (SNR) in the measured transients or reduced frame rate due to longer exposure durations to achieve a high SNR. In this paper, we propose a signal processing-based approach to compensate pile-up in post-processing, thereby enabling high power operation of the illuminating laser. While increasing illumination does cause a fundamental information loss in the data captured by SPAD, we quantify this information loss using Cramer-Rao bound and show that the errors in our framework are only limited to this information loss. We experimentally validate our hypotheses using real data from a lab prototype. △ Less

Submitted 14 June, 2018; originally announced June 2018.

Comments: 17 pages, 11 figures

Deep Imaging in Scattering Media with Single Photon Selective Plane Illumination Microscopy (SPIM)

Authors: Adithya Kumar Pediredla, Shizheng Zhang, Ben Avants, Fan Ye, Shin Nagayama, Ziying Chen, Caleb Kemere, Jacob Robinson, Ashok Veeraraghavan

Abstract: In most biological tissues, light scattering due to small differences in refractive index limits the depth of optical imaging systems. Two-photon microscopy (2PM), which significantly reduces the scattering of the excitation light, has emerged as the most common method to image deep within scattering biological tissue. This technique, however, requires high-power pulsed lasers that are both expens… ▽ More In most biological tissues, light scattering due to small differences in refractive index limits the depth of optical imaging systems. Two-photon microscopy (2PM), which significantly reduces the scattering of the excitation light, has emerged as the most common method to image deep within scattering biological tissue. This technique, however, requires high-power pulsed lasers that are both expensive and difficult to integrate into compact portable systems. In this paper, using a combination of theoretical and experimental techniques, we show that Selective Plane Illumination Microscopy (SPIM) can image nearly as deep as 2PM without the need for a high-powered pulsed laser. Compared to other single photon imaging techniques like epifluorescence and confocal microscopy, SPIM can image more than twice as deep in scattering media (approximately 10 times the mean scattering length). These results suggest that SPIM has the potential to provide deep imaging in scattering media in situations where 2PM systems would be too large or costly. △ Less

Submitted 23 April, 2016; originally announced April 2016.

Comments: 19 pages, 8 figures, OSA style

Toward Long Distance, Sub-diffraction Imaging Using Coherent Camera Arrays

Authors: Jason Holloway, M. Salman Asif, Manoj Kumar Sharma, Nathan Matsuda, Roarke Horstmeyer, Oliver Cossairt, Ashok Veeraraghavan

Abstract: In this work, we propose using camera arrays coupled with coherent illumination as an effective method of improving spatial resolution in long distance images by a factor of ten and beyond. Recent advances in ptychography have demonstrated that one can image beyond the diffraction limit of the objective lens in a microscope. We demonstrate a similar imaging system to image beyond the diffraction l… ▽ More In this work, we propose using camera arrays coupled with coherent illumination as an effective method of improving spatial resolution in long distance images by a factor of ten and beyond. Recent advances in ptychography have demonstrated that one can image beyond the diffraction limit of the objective lens in a microscope. We demonstrate a similar imaging system to image beyond the diffraction limit in long range imaging. We emulate a camera array with a single camera attached to an X-Y translation stage. We show that an appropriate phase retrieval based reconstruction algorithm can be used to effectively recover the lost high resolution details from the multiple low resolution acquired images. We analyze the effects of noise, required degree of image overlap, and the effect of increasing synthetic aperture size on the reconstructed image quality. We show that coherent camera arrays have the potential to greatly improve imaging performance. Our simulations show resolution gains of 10x and more are achievable. Furthermore, experimental results from our proof-of-concept systems show resolution gains of 4x-7x for real scenes. Finally, we introduce and analyze in simulation a new strategy to capture macroscopic Fourier Ptychography images in a single snapshot, albeit using a camera array. △ Less

Submitted 28 October, 2015; originally announced October 2015.

Comments: 13 pages, 16 figures, submitted to IEEE Transactions on Computational Imaging

Reconstruction of hidden 3D shapes using diffuse reflections

Authors: Otkrist Gupta, Andreas Velten, Thomas Willwacher, Ashok Veeraraghavan, Ramesh Raskar

Abstract: We analyze multi-bounce propagation of light in an unknown hidden volume and demonstrate that the reflected light contains sufficient information to recover the 3D structure of the hidden scene. We formulate the forward and inverse theory of secondary and tertiary scattering reflection using ideas from energy front propagation and tomography. We show that using careful choice of approximations, su… ▽ More We analyze multi-bounce propagation of light in an unknown hidden volume and demonstrate that the reflected light contains sufficient information to recover the 3D structure of the hidden scene. We formulate the forward and inverse theory of secondary and tertiary scattering reflection using ideas from energy front propagation and tomography. We show that using careful choice of approximations, such as Fresnel approximation, greatly simplifies this problem and the inversion can be achieved via a backpropagation process. We provide a theoretical analysis of the invertibility, uniqueness and choices of space-time-angle dimensions using synthetic examples. We show that a 2D streak camera can be used to discover and reconstruct hidden geometry. Using a 1D high speed time of flight camera, we show that our method can be used recover 3D shapes of objects "around the corner". △ Less

Submitted 19 March, 2012; originally announced March 2012.