-
Cosmology on a Gravitational Wave Background
Authors:
Tonatiuh Matos,
Luis A. Escamilla,
Maribel Hernández,
J. Alberto Vázquez
Abstract:
It is a fact that the universe lives on a Gravitational Wave Background (GWB), which it may be in the form of extra energy, which is not contained in Einstein's field equations. In \cite{Matos:2021jef}, a new model was developed to explain the current accelerating expansion of the universe where a GWB was incorporated by extending Einstein's equations to…
▽ More
It is a fact that the universe lives on a Gravitational Wave Background (GWB), which it may be in the form of extra energy, which is not contained in Einstein's field equations. In \cite{Matos:2021jef}, a new model was developed to explain the current accelerating expansion of the universe where a GWB was incorporated by extending Einstein's equations to $R_{μν}-\frac{1}{2}Rg_{μν}+\frac{2π^2}{λ^2}g_{μν}=κ^2 T_{μν}$, where $λ$ is the Compton wavelength of the graviton. In the present work we show that this extended form agrees very well with the observations of Cosmic chronometers, Baryon Acoustic Oscillations and Pantheon SN type Ia, reproducing the observational data with a $Δχ^2=3.26$ in favor of the present model compared to the $Λ$CDM. The values favored by these observations are $Ω_{\rm m} = 0.31 \pm 0.02$, $H_0=68 \pm 0.02$ Km/s/Mpc, $Ω_{\rm k} = 0.001\pm 0.011$; we also find an excellent consistence of this model with the Cosmic Microwave Background and the Matter Power Spectrum. We conclude that this model is an excellent alternative to explain the accelerating expansion of the universe without incorporating the cosmological constant.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
The ATLAS Readout System for LHC Runs 2 and 3
Authors:
A. Borga,
R. Blair,
G. J. Crone,
B. Green,
A. Kugel,
M. Joos,
J. Love,
J. G. Panduro Vazquez,
J. Schumacher,
P. Teixeira-Dias,
L. Tremblet,
W. Vandelli,
J. C. Vermeulen,
O. Rifki,
P. Werner,
F. J. Wickens
Abstract:
The ReadOut System (ROS) is a central part of the data acquisition (DAQ) system of the ATLAS Experiment at the CERN Large Hadron Collider (LHC). The system is responsible for receiving and buffering event data from all detector subsystems and serving these to the High Level Trigger (HLT) system via a 10 GbE network, discarding or transporting data onward once the trigger has completed its selectio…
▽ More
The ReadOut System (ROS) is a central part of the data acquisition (DAQ) system of the ATLAS Experiment at the CERN Large Hadron Collider (LHC). The system is responsible for receiving and buffering event data from all detector subsystems and serving these to the High Level Trigger (HLT) system via a 10 GbE network, discarding or transporting data onward once the trigger has completed its selection process. The ATLAS ROS was completely replaced during the 2013-2014 experimental shutdown in order to meet the demanding conditions expected during LHC Run 2 and Run 3 (2015-2025). The ROS consists of roughly one hundred Linux-based 2U-high rack-mounted servers equipped with PCIe I/O cards and 10 GbE interfaces. This paper documents the system requirements for LHC Runs 2 and 3 and the design choices taken to meet them. The results of performance measurements and the re-use of ROS technology for the development of data sources, test platforms for other systems, and another ATLAS DAQ system component, namely the Region of Interest Builder (RoIB), are also discussed. Finally performance results for Run 2 operations are presented before looking at the upgrade for Run 3.
△ Less
Submitted 21 July, 2023;
originally announced July 2023.
-
Ince-Gauss Photons in Turbulent Atmosphere: Effect of quantum numbers on beam resilience
Authors:
Emmanuel Narváez Castañeda,
Roberto Ramírez Alarcón,
José César Guerra Vázquez,
Imad Agha,
Qiwen Zhan,
William N. Plick
Abstract:
In this work, we present an extensive analysis on the nature and performance of Ince-Gauss beams, elliptical solutions of the paraxial wave equation that have orbital angular momentum, as information carriers in turbulent atmosphere. We perform numerical simulations of the propagation of these beams, and focus on the effects that the order, degree and ellipticity parameters have on the robustness…
▽ More
In this work, we present an extensive analysis on the nature and performance of Ince-Gauss beams, elliptical solutions of the paraxial wave equation that have orbital angular momentum, as information carriers in turbulent atmosphere. We perform numerical simulations of the propagation of these beams, and focus on the effects that the order, degree and ellipticity parameters have on the robustness of the beams. We find that the choice of basis in which a mode is constructed does not greatly influence the mode performance and it is instead strongly affected by the combination of order and degree values.
△ Less
Submitted 27 August, 2021;
originally announced August 2021.
-
A simple estimation of the size of the molecules using a pencil lead
Authors:
Ricardo Medel-Esquivel,
Isidro Gómez-Vargas,
J. Alberto Vázquez,
Ricardo García-Salcedo
Abstract:
The main aim of this article is that students, at the basic level of education, gain a quantitative understanding of the size of molecules by performing a simple experiment easily designed within the classroom.
The main aim of this article is that students, at the basic level of education, gain a quantitative understanding of the size of molecules by performing a simple experiment easily designed within the classroom.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Frictional half-plane contact problems subject to alternating normal and shear loads and tension in the steady state
Authors:
Hendrik Andresen,
David A. Hills,
James R. Barber,
Jesus Vazquez
Abstract:
The problem of a general, symmetric contact, between elastically similar bodies, and capable of idealisation using half-plane theory, is studied in the presence of interfacial friction. It is subject to a constant set of loads - normal force, shear force and bulk tension parallel with the interface - together with an oscillatory set of the same quantities, and is in the steady state. Partial slip…
▽ More
The problem of a general, symmetric contact, between elastically similar bodies, and capable of idealisation using half-plane theory, is studied in the presence of interfacial friction. It is subject to a constant set of loads - normal force, shear force and bulk tension parallel with the interface - together with an oscillatory set of the same quantities, and is in the steady state. Partial slip conditions are expected to ensue for a range of these quantities, and the permanent stick zone is explicitly established, thereby effectively specifying the maximum extent of the slip zones. Exact and approximate, easy to apply recipes are obtained.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Closed-form solutions for tilted three-part piecewise-quadratic half-plane contacts
Authors:
Hendrik Andresen,
David A. Hills,
Jesus Vazquez
Abstract:
A general half-plane contact problem in which the geometry is specified in a piecewise-quadratic sense over three segments is solved in closed form. This includes the effects of a moment applied sufficient to introduce separation of one segment and the application of a shearing force sufficient or insufficient to cause sliding. Extending existing solutions to asymmetrical problems is necessary in…
▽ More
A general half-plane contact problem in which the geometry is specified in a piecewise-quadratic sense over three segments is solved in closed form. This includes the effects of a moment applied sufficient to introduce separation of one segment and the application of a shearing force sufficient or insufficient to cause sliding. Extending existing solutions to asymmetrical problems is necessary in order to broaden our understanding of the behaviour of dovetail roots of gas turbine fan blades. In previous studies symmetrical contacts have often been used to represent a dovetail flank contact. In the asymmetrical case, the contact pressure may be considerably higher at one of the contact edges compared to the corresponding symmetrical case. Exploiting the generality provided with the solution presented in this study, several simpler indenter problems are investigated making use of an algebraic manipulator. The Mathematica code is made available for download.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
On the Determination of the Yield Surface within the Flow of Yield Stress Fluids using Computational Fluid Dynamics
Authors:
N Schaer,
J. Vazquez,
M. Dufresne,
G Isenmann,
J. Wertel
Abstract:
A part of non-Newtonian fluids are yield stress fluids. They require a minimum stress to flow. Below this minimum value, yield stress fluids remain solid. To date, 1D and 2D numerical models have been used predominantly to study free surface flows. However, some phenomena have three-dimensional behaviour such as the appearance of the limit between the liquid regime and the solid regime. Here the a…
▽ More
A part of non-Newtonian fluids are yield stress fluids. They require a minimum stress to flow. Below this minimum value, yield stress fluids remain solid. To date, 1D and 2D numerical models have been used predominantly to study free surface flows. However, some phenomena have three-dimensional behaviour such as the appearance of the limit between the liquid regime and the solid regime. Here the aim is to use a Computational Fluid Dynamics (CFD) to reproduce the properties of the free surface flow of yield stress fluids in an open channel. Modelling the behaviour of the yield stress fluid is also expected. The numerical study is driven with the software OpenFOAM. Numerical outcomes are compared with experimental results from model experiment and theorical predictions based on the rheological constitutive law. The 3D model is validated by evaluating its capacity to reproduce reliably flow patterns. The depth, the local velocity and the stress are quantified for different numerical configurations (grid level, rheological parameters). Then numerical results are used to detect the presence of rigid and sheared zones within the flow.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
The Pierre Auger Observatory V: Enhancements
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Ongoing and planned enhancements of the Pierre Auger Observatory
Ongoing and planned enhancements of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
The Pierre Auger Observatory IV: Operation and Monitoring
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Technical reports on operations and monitoring of the Pierre Auger Observatory
Technical reports on operations and monitoring of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
Spectral characteristics of side face excited microstructured fibers for photonic integrated circuits formations
Authors:
I. V. Guryev,
D. J. Vazquez,
I. A. Sukhoivanov,
C. H. Luna,
J. M. Estudillo-Ayala,
J. A. Andrade Lucio,
R. M. Chavez,
M. Trejo-Durán,
E. Alvarado Mendez,
R. Rojas-Laguna
Abstract:
We propose a new method for mass production of the photonic crystal devices on the basis of widely-known and well-developed technology such as microstructured optical fibers. In this paper, we investigate the optical properties of side-excited microstructured optical fiber and discuss the conditions for utilization such a structure as a planar photonic crystal device, namely, the high-quality reso…
▽ More
We propose a new method for mass production of the photonic crystal devices on the basis of widely-known and well-developed technology such as microstructured optical fibers. In this paper, we investigate the optical properties of side-excited microstructured optical fiber and discuss the conditions for utilization such a structure as a planar photonic crystal device, namely, the high-quality resonance filter.
△ Less
Submitted 4 December, 2010;
originally announced December 2010.
-
Continuous opinion model in small world directed networks
Authors:
Yérali Gandica,
Marcelo del Castillo-Mussot,
Gerardo J. Vázquez,
Sergio Rojas
Abstract:
In the compromise model of continuous opinions proposed by Deffuant et al, the states of two agents in a network can start to converge if they are neighbors and if their opinions are sufficiently close to each other, below a given threshold of tolerance $ε$. In directed networks, if agent i is a neighbor of agent j, j need not be a neighbor of i. In Watts-Strogatz networks we performed simulations…
▽ More
In the compromise model of continuous opinions proposed by Deffuant et al, the states of two agents in a network can start to converge if they are neighbors and if their opinions are sufficiently close to each other, below a given threshold of tolerance $ε$. In directed networks, if agent i is a neighbor of agent j, j need not be a neighbor of i. In Watts-Strogatz networks we performed simulations to find the averaged number of final opinions $<F>$ and their distribution as a function of $ε$ and of the network structural disorder. In directed networks $<F>$ exhibits a rich structure, being larger than in undirected networks for higher values of $ε$, and smaller for lower values of $ε$.
△ Less
Submitted 21 June, 2010;
originally announced June 2010.
-
Induced cultural globalization by an external vector field in an enhanced Axelrod model
Authors:
Arezky H. Rodríguez,
M. del Castillo-Mussot,
G. J. Vázquez
Abstract:
A new model is proposed, in the context of Axelrod's model for the study of cultural dissemination, to include and external vector field (VF) which describes the effects of mass media on social systems. The VF acts over the whole system and it is characterized by two parameters: a non-null overlap with each agent in the society and a confidence value of its information. Beyond a threshold value…
▽ More
A new model is proposed, in the context of Axelrod's model for the study of cultural dissemination, to include and external vector field (VF) which describes the effects of mass media on social systems. The VF acts over the whole system and it is characterized by two parameters: a non-null overlap with each agent in the society and a confidence value of its information. Beyond a threshold value of the confidence there is induced monocultural globalization of the system lined up with the VF. Below this value, the multicultural states are unstable and certain homogenization of the system is obtained in opposite line up according to that we have called {\it negative publicity} effect. Three regimes of behavior for the spread process of the VF information as a function of time are reported.
△ Less
Submitted 17 October, 2008;
originally announced October 2008.
-
The Cosmological Constant for the Crystalline Vacuum Cosmic Space Model
Authors:
J. A. Montemayor-Aldrete,
J. R. Morones-Ibarra,
A. Morales-Mori,
A. Mendoza-Allende,
A. Montemayor-Varela,
M. del Castillo-Mussot,
G. J. Vazquez
Abstract:
The value of the cosmological constant arising from a crystalline model for vacuum cosmic space with lattice parameter of the order of the neutron radius [1] has been calculated. The model allows to solve, in an easy way, the problem of the cosmological constant giving the right order of magnitude, which corresponds very well with the mean value of matter density in the universe. The obtained va…
▽ More
The value of the cosmological constant arising from a crystalline model for vacuum cosmic space with lattice parameter of the order of the neutron radius [1] has been calculated. The model allows to solve, in an easy way, the problem of the cosmological constant giving the right order of magnitude, which corresponds very well with the mean value of matter density in the universe. The obtained value is about 10 to the power of (-48) square Km. Diffraction experiments with non-thermal neutron beam in cosmic space are proposed to search for the possibility of crystalline structure of vacuum space and to measure the lattice parameter.
△ Less
Submitted 13 March, 2006;
originally announced March 2006.
-
Gravitational Stability for a Vacuum Cosmic Space Crystalline Model
Authors:
J. A. Montemayor-Aldrete,
J. R. Morones-Ibarra,
A. Morales-Mori,
A. Mendoza-Allende,
A. Montemayor-Varela,
M. del Castillo-Mussot,
G. J. Vazquez
Abstract:
Using Heisenberg's uncertainty principle it is shown that the gravitational stability condition for a crystalline vacuum cosmic space implies to obtain an equation formally equivalent to the relation first used by Gamow to predict the present temperature of the microwave background from the matter density. The compatibility condition between the quantum and the relativistic approaches has been o…
▽ More
Using Heisenberg's uncertainty principle it is shown that the gravitational stability condition for a crystalline vacuum cosmic space implies to obtain an equation formally equivalent to the relation first used by Gamow to predict the present temperature of the microwave background from the matter density. The compatibility condition between the quantum and the relativistic approaches has been obtained without infinities arising from the quantum analysis or singularities arising from the relativistic theory. The action which leads to our theory is the least action possible in a quantum scheme. The energy fluctuation involved in the gravitational stabilization of vacuum space is 10 to the power of (-40) times the energy of the crystalline structure of vacuum space inside the present Universe volume.
△ Less
Submitted 13 March, 2006;
originally announced March 2006.
-
An illustrative experiment on electromagnetic oscillations
Authors:
J. Escalante,
J. L. Vazquez,
D. Montes,
L. E. Lopez
Abstract:
It is the purpose of this manuscript to place an illustrative demonstration on the measurement of damped electromagnetic oscillations for a RLC circuit that it is easy to set in any physics laboratory equipped with PASCO technologies and USB Electrical PASPort sensors together with standard electrical components. The results of recording the electrical voltage with DATA Studio software have a ve…
▽ More
It is the purpose of this manuscript to place an illustrative demonstration on the measurement of damped electromagnetic oscillations for a RLC circuit that it is easy to set in any physics laboratory equipped with PASCO technologies and USB Electrical PASPort sensors together with standard electrical components. The results of recording the electrical voltage with DATA Studio software have a very good agreement with performed simulations from MULTISIM software and/or standard calculations from theory. Our students and instructors enjoy of the experiment for their simplicity set up in addition to the instructive oscillations.
△ Less
Submitted 13 October, 2005;
originally announced October 2005.
-
On the exposure to mobile phone radiation in trains
Authors:
J. Ferrer,
L. Fernandez-Seivane,
J. M. Hernando,
M. B. Castan,
L. Garcia,
J. M. Vazquez
Abstract:
This report presents theoretical estimates of the Power Density levels which may be reached inside trains. Two possible sources of high levels of radiation are discussed. The first one arises since the walls of the wagons are metallic and therefore bounce back almost all radiation impinging on them. The second is due to the simultaneous emission of a seemingly large number of nearby telephones.…
▽ More
This report presents theoretical estimates of the Power Density levels which may be reached inside trains. Two possible sources of high levels of radiation are discussed. The first one arises since the walls of the wagons are metallic and therefore bounce back almost all radiation impinging on them. The second is due to the simultaneous emission of a seemingly large number of nearby telephones. The theoretical study presented here shows that Power Densities stay at values below reference levels always.
△ Less
Submitted 20 May, 2005;
originally announced May 2005.
