Showing 1–3 of 3 results for author: VahidMohammadi, A

2D MXene Electrochemical Transistors

Authors: Jyoti Shakya, Min-A Kang, Jian Li, Armin VahidMohammadi, Weiqian Tian, Erica Zeglio, Mahiar Max Hamedi

Abstract: In the past two decades another transistor based on conducting polymers, called the organic electrochemical transistor (ECT) was shown and largely studied. The main difference between organic ECTs and FETs is the mode and extent of channel doping: while in FETs the channel only has surface doping through dipoles, the mixed ionic-electronic conductivity of the channel material in Organic ECTs enabl… ▽ More In the past two decades another transistor based on conducting polymers, called the organic electrochemical transistor (ECT) was shown and largely studied. The main difference between organic ECTs and FETs is the mode and extent of channel doping: while in FETs the channel only has surface doping through dipoles, the mixed ionic-electronic conductivity of the channel material in Organic ECTs enables bulk electrochemical doping. As a result, the organic ECT maximizes conductance modulation at the expense of speed. Until now ECTs have been based on conducting polymers, but here we show that MXenes, a class of 2D materials beyond graphene, have mixed ionic-electronic properties that enable the realization of electrochemical transistors (ECTs). We show that the formulas for organic ECTs can be applied to these 2D ECTs and used to extract parameters like mobility. These MXene ECTs have high transconductance values but low on-off ratios. We further show that conductance switching data measured using ECT, in combination with other in-situ ex-situ electrochemical measurements, is a powerful tool for correlating the change in conductance to that of redox state: to our knowledge, this is the first report of this important correlation for MXene films. Many future possibilities exist for MXenes ECTs, and we think other 2D materials with bandgaps can also form ECTs with single or heterostructured 2D materials. 2D ECTs can draw great inspiration and theoretical tools from the field of organic ECTs and have the potential to considerably extend the capabilities of transistors beyond that of conducting polymer ECTs, with added properties such as extreme heat resistance, tolerance for solvents, and higher conductivity for both electrons and ions than conducting polymers. △ Less

Submitted 10 January, 2024; v1 submitted 19 March, 2023; originally announced March 2023.

Comments: 14 pages, 4 figures

MSC Class: 82D37

High-speed ionic synaptic memory based on two-dimensional titanium carbide MXene

Authors: Armantas Melianas, Min-A Kang, Armin VahidMohammadi, Weiqian Tian, Yury Gogotsi, Alberto Salleo, Mahiar Max Hamedi

Abstract: Synaptic devices with linear high-speed switching can accelerate learning in artificial neural networks (ANNs) embodied in hardware. Conventional resistive memories however suffer from high write noise and asymmetric conductance tuning, preventing parallel programming of ANN arrays as needed to surpass conventional computing efficiency. Electrochemical random-access memories (ECRAMs), where resist… ▽ More Synaptic devices with linear high-speed switching can accelerate learning in artificial neural networks (ANNs) embodied in hardware. Conventional resistive memories however suffer from high write noise and asymmetric conductance tuning, preventing parallel programming of ANN arrays as needed to surpass conventional computing efficiency. Electrochemical random-access memories (ECRAMs), where resistive switching occurs by ion insertion into a redox-active channel address these challenges due to their linear switching and low noise. ECRAMs using two-dimensional (2D) materials and metal oxides suffer from slow ion kinetics, whereas organic ECRAMs enable high-speed operation but face significant challenges towards on-chip integration due to poor temperature stability of polymers. Here, we demonstrate ECRAMs using 2D titanium carbide (Ti3C2Tx) MXene that combines the high speed of organics and the integration compatibility of inorganic materials in a single high-performance device. Our ECRAMs combine the speed, linearity, write noise, switching energy and endurance metrics essential for parallel acceleration of ANNs, and importantly, they are stable after heat treatment needed for back-end-of-line integration with Si electronics. The high speed and performance of these ECRAMs introduces MXenes, a large family of 2D carbides and nitrides with more than 30 compositions synthesized to date, as very promising candidates for devices operating at the nexus of electrochemistry and electronics. △ Less

Submitted 23 April, 2021; v1 submitted 12 April, 2021; originally announced April 2021.

Comments: Fig. 4 now shows film stability up to 400C (replacing earlier 300C data). Section headings were also added to the main text

Wafer-Scale Lateral Self-assembly of Mosaic Ti3C2Tx (MXene) Monolayer Films

Authors: Mehrnaz Mojtabavi, Armin VahidMohammadi, Davoud Hejazi, Swastik Kar, Sina Shahbazmohamadi, Meni Wanunu

Abstract: Bottom-up assembly of two-dimensional (2D) materials into macroscale morphologies with emergent properties requires control of the material surroundings, so that energetically favorable conditions direct the assembly process. MXenes, a class of recently developed 2D materials, have found new applications in areas such as electrochemical energy storage, nanoscale electronics, sensors, and biosensor… ▽ More Bottom-up assembly of two-dimensional (2D) materials into macroscale morphologies with emergent properties requires control of the material surroundings, so that energetically favorable conditions direct the assembly process. MXenes, a class of recently developed 2D materials, have found new applications in areas such as electrochemical energy storage, nanoscale electronics, sensors, and biosensors. In this report, we present a lateral self-assembly method for wafer-scale deposition of a mosaic-type 2D MXene flake monolayers that spontaneously order at the interface between two immiscible solvents. Facile transfer of this monolayer onto a flat substrate (Si, glass) results in high-coverage (>90%) monolayer films with uniform thickness, homogeneous optical properties, and good electrical conductivity. Multiscale characterization of the resulting films reveals the mosaic structure and sheds light on the electronic properties of the films, which exhibit good conductivity over cm-scale areas. △ Less

Submitted 23 June, 2020; originally announced June 2020.

Comments: 30 pages, 13 figures