Showing 1–23 of 23 results for author: Underwood, D

Using Cryogenic CMOS Control Electronics To Enable A Two-Qubit Cross-Resonance Gate

Authors: Devin L. Underwood, Joseph A. Glick, Ken Inoue, David J. Frank, John Timmerwilke, Emily Pritchett, Sudipto Chakraborty, Kevin Tien, Mark Yeck, John F. Bulzacchelli, Chris Baks, Pat Rosno, Raphael Robertazzi, Matthew Beck, Rajiv V. Joshi, Dorothy Wisnieff, Daniel Ramirez, Jeff Ruedinger, Scott Lekuch, Brian P. Gaucher, Daniel J. Friedman

Abstract: Qubit control electronics composed of CMOS circuits are of critical interest for next generation quantum computing systems. A CMOS-based application specific integrated circuit (ASIC) fabricated in 14nm FinFET technology was used to generate and sequence qubit control waveforms and demonstrate a two-qubit cross resonance gate between fixed frequency transmons. The controller was thermally anchored… ▽ More Qubit control electronics composed of CMOS circuits are of critical interest for next generation quantum computing systems. A CMOS-based application specific integrated circuit (ASIC) fabricated in 14nm FinFET technology was used to generate and sequence qubit control waveforms and demonstrate a two-qubit cross resonance gate between fixed frequency transmons. The controller was thermally anchored to the T = 4K stage of a dilution refrigerator and the measured power was 23 mW per qubit under active control. The chip generated single--side banded output frequencies between 4.5 and 5.5 GHz with a maximum power output of -18 dBm. Randomized benchmarking (RB) experiments revealed an average number of 1.71 instructions per Clifford (IPC) for single-qubit gates, and 17.51 IPC for two-qubit gates. A single-qubit error per gate of $ε_{\text{1Q}}$=8e-4 and two-qubit error per gate of $ε_\text{2Q}$=1.4e-2 is shown. A drive-induced Z-rotation is observed by way of a rotary echo experiment; this observation is consistent with expected qubit behavior given measured excess local oscillator (LO) leakage from the CMOS chip. The effect of spurious drive induced Z-errors is numerically evaluated with a two-qubit model Hamiltonian, and shown to be in good agreement with measured RB data. The modeling results suggest the Z-error varies linearly with pulse amplitude. △ Less

Submitted 8 December, 2023; v1 submitted 22 February, 2023; originally announced February 2023.

Comments: 33 pages, 10 figures

Mechanisms to control laser-plasma coupling in laser wakefield electron acceleration

Authors: L. T. Dickson, C. I. D. Underwood, F. Filippi, R. J. Shalloo, J. Björklund Svensson, D. Guénot, K. Svendsen, I. Moulanier, S. Dobosz Dufrénoy, C. D. Murphy, N. C. Lopes, P. P. Rajeev, Z. Najmudin, G. Cantono, A. Persson, O. Lundh, G. Maynard, M. J. V. Streeter, B. Cros

Abstract: Experimental results, supported by precise modelling, demonstrate optimisation of a plasma-based injector with intermediate laser pulse energy ($<1$ J), corresponding to a normalised vector potential $a_0 = 2.15$, using ionisation injection in a tailored plasma density profile. An increase in electron bunch quality and energy is achieved experimentally with the extension of the density downramp at… ▽ More Experimental results, supported by precise modelling, demonstrate optimisation of a plasma-based injector with intermediate laser pulse energy ($<1$ J), corresponding to a normalised vector potential $a_0 = 2.15$, using ionisation injection in a tailored plasma density profile. An increase in electron bunch quality and energy is achieved experimentally with the extension of the density downramp at the plasma exit. Optimisation of the focal position of the laser pulse in the tailored plasma density profile is shown to efficiently reduce electron bunch angular deviation, leading to a better alignment of the electron bunch with the laser axis. Single peak electron spectra are produced in a previously unexplored regime by combining an early focal position and adaptive optic control of the laser wavefront through optimising the symmetry of the pre-focal laser energy distribution. Experimental results have been validated through particle-in-cell simulations using realistic laser energy, phase distribution, and temporal envelope, allowing for accurate predictions of difficult to model parameters, such as total charge and spatial properties of the electron bunches, opening the way for more accurate modelling for the design of plasma-based accelerators. △ Less

Submitted 18 August, 2022; v1 submitted 17 August, 2022; originally announced August 2022.

Comments: 13 pages, 9 figures

Automation and control of laser wakefield accelerators using Bayesian optimisation

Authors: R. J. Shalloo, S. J. D. Dann, J. -N. Gruse, C. I. D. Underwood, A. F. Antoine, C. Arran, M. Backhouse, C. D. Baird, M. D. Balcazar, N. Bourgeois, J. A. Cardarelli, P. Hatfield, J. Kang, K. Krushelnick, S. P. D. Mangles, C. D. Murphy, N. Lu, J. Osterhoff, K. Põder, P. P. Rajeev, C. P. Ridgers, S. Rozario, M. P. Selwood, A. J. Shahani, D. R. Symes , et al. (4 additional authors not shown)

Abstract: Laser wakefield accelerators promise to revolutionise many areas of accelerator science. However, one of the greatest challenges to their widespread adoption is the difficulty in control and optimisation of the accelerator outputs due to coupling between input parameters and the dynamic evolution of the accelerating structure. Here, we use machine learning techniques to automate a 100 MeV-scale ac… ▽ More Laser wakefield accelerators promise to revolutionise many areas of accelerator science. However, one of the greatest challenges to their widespread adoption is the difficulty in control and optimisation of the accelerator outputs due to coupling between input parameters and the dynamic evolution of the accelerating structure. Here, we use machine learning techniques to automate a 100 MeV-scale accelerator, which optimised its outputs by simultaneously varying up to 6 parameters including the spectral and spatial phase of the laser and the plasma density and length. Most notably, the model built by the algorithm enabled optimisation of the laser evolution that might otherwise have been missed in single-variable scans. Subtle tuning of the laser pulse shape caused an 80% increase in electron beam charge, despite the pulse length changing by just 1%. △ Less

Submitted 26 November, 2020; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 10 pages, 5 figures

Quantum Sensing for High Energy Physics

Authors: Zeeshan Ahmed, Yuri Alexeev, Giorgio Apollinari, Asimina Arvanitaki, David Awschalom, Karl K. Berggren, Karl Van Bibber, Przemyslaw Bienias, Geoffrey Bodwin, Malcolm Boshier, Daniel Bowring, Davide Braga, Karen Byrum, Gustavo Cancelo, Gianpaolo Carosi, Tom Cecil, Clarence Chang, Mattia Checchin, Sergei Chekanov, Aaron Chou, Aashish Clerk, Ian Cloet, Michael Crisler, Marcel Demarteau, Ranjan Dharmapalan , et al. (91 additional authors not shown)

Abstract: Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics. Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics. △ Less

Submitted 29 March, 2018; originally announced March 2018.

Comments: 38 pages, report of the first workshop on Quantum Sensing for High Energy Physics, held at Argonne National Laboratory, December 12-14, 2017

Photonic ring resonator filters for astronomical OH suppression

Authors: S. C. Ellis, S. Kuhlmann, K. Kuehn, H. Spinka, D. Underwood, R. R. Gupta, L. Ocola, P. Liu, G. Wei, N. P. Stern, J. Bland-Hawthorn, P. Tuthill

Abstract: Ring resonators provide a means of filtering specific wavelengths from a waveguide, and optionally dropping the filtered wavelengths into a second waveguide. Both of these features are potentially useful for astronomical instruments. In this paper we focus on their use as notch filters to remove the signal from atmospheric OH emission lines from astronomical spectra, however we also briefly disc… ▽ More Ring resonators provide a means of filtering specific wavelengths from a waveguide, and optionally dropping the filtered wavelengths into a second waveguide. Both of these features are potentially useful for astronomical instruments. In this paper we focus on their use as notch filters to remove the signal from atmospheric OH emission lines from astronomical spectra, however we also briefly discuss their use as frequency combs for wavelength calibration and as drop filters for Doppler planet searches. We derive the design requirements for ring resonators for OH suppression from theory and finite difference time domain simulations. We find that rings with small radii (<10 microns) are required to provide an adequate free spectral range, leading to high index contrast materials such as Si and Si$_{3}$N$_{4}$. Critically coupled rings with high self-coupling coefficients should provide the necessary Q factors, suppression depth, and throughput for efficient OH suppression. We report on our progress in fabricating both Si and Si$_{3}$N$_{4}$ rings for OH suppression, and give results from preliminary laboratory tests. Our early devices show good control over the free spectral range and wavelength separation of multi-ring devices. The self-coupling coefficients are high (>0.9), but further optimisation is required to achieve higher Q and deeper notches, with current devices having $Q \approx 4000$ and $\approx 10$ dB suppression. The overall prospects for the use of ring resonators in astronomical instruments is promising, provided efficient fibre-chip coupling can be achieved. △ Less

Submitted 24 May, 2017; originally announced May 2017.

Comments: Submitted to Optics Express feature issue on Recent Advances in Astrophotonics (27 pages, 20 figs)

ExoMol molecular line lists - XVII The rotation-vibration spectrum of hot SO$_3$

Authors: Daniel S. Underwood, Sergei N. Yurchenko, Jonathan Tennyson, Ahmed F. Al-Refaie, Sønnik Clausen, Alexander Fateev

Abstract: Sulphur trioxide (SO$_3$) is a trace species in the atmospheres of the Earth and Venus, as well as well as being an industrial product and an environmental pollutant. A variational line list for $^{32}$S$^{16}$O$_{3}$, named UYT2, is presented containing 21 billion vibration-rotation transitions. UYT2 can be used to model infrared spectra of SO$_3$ at wavelengths longwards of 2 $μ$m ($ν< 5000$ cm… ▽ More Sulphur trioxide (SO$_3$) is a trace species in the atmospheres of the Earth and Venus, as well as well as being an industrial product and an environmental pollutant. A variational line list for $^{32}$S$^{16}$O$_{3}$, named UYT2, is presented containing 21 billion vibration-rotation transitions. UYT2 can be used to model infrared spectra of SO$_3$ at wavelengths longwards of 2 $μ$m ($ν< 5000$ cm$^{-1}$) for temperatures up to 800 K. Infrared absorption cross sections are also recorded at 300 and 500 C are used to validate the UYT2 line list. The intensities in UYT2 are scaled to match the measured cross sections. The line list is made available in electronic form as supplementary data to this article and at \url{www.exomol.com}. △ Less

Submitted 5 July, 2016; originally announced July 2016.

Comments: 15 pages, 10 figures, 9 tables MNRAS submitted

The ExoMol database: molecular line lists for exoplanet and other hot atmospheres

Authors: Jonathan Tennyson, Sergei N. Yurchenko, Ahmed F. Al-Refaie, Emma J. Barton, Katy L. Chubb, Phillip A. Coles, S. Diamantopoulou, Maire N. Gorman, Christian Hill, Aden Z. Lam, Lorenzo Lodi, Laura K. McKemmish, Yueqi Na, Alec Owens, Oleg L. Polyansky, Clara Sousa-Silva, Daniel S. Underwood, Andrey Yachmenev, Emil Zak

Abstract: The ExoMol database (www.exomol.com) provides extensive line lists of molecular transitions which are valid over extended temperatures ranges. The status of the current release of the database is reviewed and a new data structure is specified. This structure augments the provision of energy levels (and hence transition frequencies) and Einstein $A$ coefficients with other key properties, including… ▽ More The ExoMol database (www.exomol.com) provides extensive line lists of molecular transitions which are valid over extended temperatures ranges. The status of the current release of the database is reviewed and a new data structure is specified. This structure augments the provision of energy levels (and hence transition frequencies) and Einstein $A$ coefficients with other key properties, including lifetimes of individual states, temperature-dependent cooling functions, Landé $g$-factors, partition functions, cross sections, $k$-coefficients and transition dipoles with phase relations. Particular attention is paid to the treatment of pressure broadening parameters. The new data structure includes a definition file which provides the necessary information for utilities accessing ExoMol through its application programming interface (API). Prospects for the inclusion of new species into the database are discussed. △ Less

Submitted 2 October, 2018; v1 submitted 18 March, 2016; originally announced March 2016.

Comments: 68 pages, 24 Tables, 1 figure. Updated corrects minor errors in format statements

Journal ref: J. Molec. Spectrosc., 327, 73-94 (2016)

Design, Construction and Testing of the Digital Hadron Calorimeter (DHCAL) Electronics

Authors: C. Adams, A. Bambaugh, B. Bilki, J. Butler, F. Corriveau, T. Cundiff, G. Drake, K. Francis, V. Guarino, B. Haberichter, E. Hazen, J. Hoff, S. Holm, A. Kreps, P. DeLurgio, L. Dal Monte, N. Mucia, E. Norbeck, D. Northacker, Y. Onel, B. Pollack, J. Repond, J. Schlereth, J. R. Smith, D. Trojand , et al. (8 additional authors not shown)

Abstract: A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord… ▽ More A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of the electronic readout system of this prototype calorimeter. The system is based on the DCAL front-end chip and a VME-based back-end. △ Less

Submitted 4 March, 2016; originally announced March 2016.

Design, Construction and Commissioning of the Digital Hadron Calorimeter - DHCAL

Authors: C. Adams, A. Bambaugh, B. Bilki, J. Butler, F. Corriveau, T. Cundiff, G. Drake, K. Francis, B. Furst, V. Guarino, B. Haberichter, E. Hazen, J. Hoff, S. Holm, A. Kreps, P. DeLurgio, Z. Matijas, L. Dal Monte, N. Mucia, E. Norbeck, D. Northacker, Y. Onel, B. Pollack, J. Repond, J. Schlereth , et al. (11 additional authors not shown)

Abstract: A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord… ▽ More A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of this prototype calorimeter. △ Less

Submitted 4 March, 2016; originally announced March 2016.

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier

Authors: M. Demarteau, R. Lipton, H. Nicholson, I. Shipsey, D. Akerib, A. Albayrak-Yetkin, J. Alexander, J. Anderson, M. Artuso, D. Asner, R. Ball, M. Battaglia, C. Bebek, J. Beene, Y. Benhammou, E. Bentefour, M. Bergevin, A. Bernstein, B. Bilki, E. Blucher, G. Bolla, D. Bortoletto, N. Bowden, G. Brooijmans, K. Byrum , et al. (189 additional authors not shown)

Abstract: These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss… ▽ More These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 50 pages

An ab initio variationally computed room-temperature line list for SO3

Authors: Daniel S. Underwood, Jonathan Tennyson, Sergei N. Yurchenko

Abstract: {\it Ab initio} potential energy and dipole moment surfaces are computed for sulfur trioxide (SO$_3$) at the CCSD(T)-F12b level of theory and appropriate triple-zeta basis sets. These surfaces are fitted and used, with a slight correction for the equilibrium S--O distance, to compute pure rotational and rotation-vibraton spectra of \sothree\ using the variational nuclear motion program TROVE. The… ▽ More {\it Ab initio} potential energy and dipole moment surfaces are computed for sulfur trioxide (SO$_3$) at the CCSD(T)-F12b level of theory and appropriate triple-zeta basis sets. These surfaces are fitted and used, with a slight correction for the equilibrium S--O distance, to compute pure rotational and rotation-vibraton spectra of \sothree\ using the variational nuclear motion program TROVE. The calculations considered transitions in the region 0--4000 \cm\ with rotational states up to J=85. The resulting line list of 349~348~513 transitions is appropriate for modelling room temperature SO3 spectra. Good agreement is found with the observed infrared absorption spectra and the calculations are used to place the measured relative intensities on an absolute scale. A list of 10~878 experimental transitions is provided in a form suitable for inclusion in standard atmospheric and planetary spectroscopic databases. △ Less

Submitted 8 February, 2013; originally announced February 2013.

Comments: Phys. Chem. Chem. Phys. (submitted)

Journal ref: PHYSICAL CHEMISTRY CHEMICAL PHYSICS 15 10118-10125 (2013)

Modulator-Based, High Bandwidth Optical Links for HEP Experiments

Authors: D. G. Underwood, G. Drake, W. S. Fernando, R. W. Stanek

Abstract: As a concern with the reliability, bandwidth and mass of future optical links in LHC experiments, we are investigating CW lasers and light modulators as an alternative to VCSELs. These links will be particularly useful if they utilize light modulators which are very small, low power, high bandwidth, and are very radiation hard. We have constructed a test system with 3 such links, each operating at… ▽ More As a concern with the reliability, bandwidth and mass of future optical links in LHC experiments, we are investigating CW lasers and light modulators as an alternative to VCSELs. These links will be particularly useful if they utilize light modulators which are very small, low power, high bandwidth, and are very radiation hard. We have constructed a test system with 3 such links, each operating at 10 Gb/s. We present the quality of these links (jitter, rise and fall time, BER) and eye mask margins (10GbE) for 3 different types of modulators: LiNbO3-based, InP-based, and Si-based. We present the results of radiation hardness measurements with up to ~1012 protons/cm2 and ~65 krad total ionizing dose (TID), confirming no single event effects (SEE) at 10 Gb/s with either of the 3 types of modulators. These optical links will be an integral part of intelligent tracking systems at various scales from coupled sensors through intra-module and off detector communication. We have used a Si-based photonic transceiver to build a complete 40 Gb/s bi-directional link (10 Gb/s in each of four fibers) for a 100m run and have characterized it to compare with standard VCSEL-based optical links. Some future developments of optical modulator-based high bandwidth optical readout systems, and applications based on both fiber and free space data links, such as local triggering and data readout and trigger-clock distribution, are also discussed. △ Less

Submitted 23 June, 2012; originally announced June 2012.

Comments: 5 pages, 12 figures, IEEE Real Time Conference 2012 Berkeley

New Optical Link Technologies for HEP Experiments

Authors: P. Delurgio, W. Fernando, B. Salvachua, D. Lopez, R. Stanek, D. Underwood

Abstract: As a concern with the reliability and mass of current optical links in LHC experiments, we are investigating CW lasers and light modulators as an alternative to VCSELs. In addition we are developing data links in air, utilizing steering by MEMS mirrors and optical feedback paths for the control loop. Laser, modulator, and lens systems used are described, as well as two different electronic systems… ▽ More As a concern with the reliability and mass of current optical links in LHC experiments, we are investigating CW lasers and light modulators as an alternative to VCSELs. In addition we are developing data links in air, utilizing steering by MEMS mirrors and optical feedback paths for the control loop. Laser, modulator, and lens systems used are described, as well as two different electronic systems for a free space steering feedback loop. Our prototype system currently operates at 1.25 Gb/s, but could be upgraded. This link works over distances of order meters. Such links might enable one to move communication lasers (e.g. VCSELs) and optical fibers out of tracking detectors, for reasons such as reliability and power consumption. Some applications for free space data links, such as local triggering and data readout and trigger-clock distribution and links for much longer distances are also discussed. △ Less

Submitted 30 September, 2011; originally announced September 2011.

Comments: Proceedings of the DPF-2011 Conference, Providence, RI, August 8-13, 2011

Tests of a Digital Hadron Calorimeter

Authors: B. Bilki, John Butler, Ed May, Georgios Mavromanolakis, Edwin Norbeck, Jose Repond, David Underwood, Lei Xia, Qingmin Zhang

Abstract: In the context of developing a hadron calorimeter with extremely fine granularity for the application of Particle Flow Algorithms to the measurement of jet energies at a future lepton collider, we report on extensive tests of a small scale prototype calorimeter. The calorimeter contained up to 10 layers of Resistive Plate Chambers (RPCs) with 2560 1 \times 1 cm2 readout pads, interleaved with stee… ▽ More In the context of developing a hadron calorimeter with extremely fine granularity for the application of Particle Flow Algorithms to the measurement of jet energies at a future lepton collider, we report on extensive tests of a small scale prototype calorimeter. The calorimeter contained up to 10 layers of Resistive Plate Chambers (RPCs) with 2560 1 \times 1 cm2 readout pads, interleaved with steel absorber plates. The tests included both long-term Cosmic Ray data taking and measurements in particle beams, where the response to broadband muons and to pions and positrons with energies in the range of 1 - 16 GeV was established. Detailed measurements of the chambers efficiency as function of beam intensity have also been performed using 120 GeV protons at varying intensity. The data are compared to simulations based on GEANT4 and to analytical calculations of the rate limitations. △ Less

Submitted 3 May, 2010; originally announced May 2010.

Journal ref: J.Phys.Conf.Ser.293:012075,2011

Environmental Dependence of the Performance of Resistive Plate Chambers

Authors: Burak Bilki, John Butler, Ed May, Georgios Mavromanolakis, Edwin Norbeck, Jose Repond, David Underwood, Lei Xia, Qingmin Zhang

Abstract: This paper reports on the performance of Resistive Plate Chambers (RPCs) as function of the gas flow rate through the chambers and of environmental conditions, such as atmospheric pressure, ambient temperature and air humidity. The chambers are read out by pads with an area of 1 x 1 cm2 and a 1-bit resolution per pad. The performance measures include the noise rate as well as the detection effic… ▽ More This paper reports on the performance of Resistive Plate Chambers (RPCs) as function of the gas flow rate through the chambers and of environmental conditions, such as atmospheric pressure, ambient temperature and air humidity. The chambers are read out by pads with an area of 1 x 1 cm2 and a 1-bit resolution per pad. The performance measures include the noise rate as well as the detection efficiency and pad multiplicity for cosmic rays. The measurements extended over a period of almost one year and are sensitive to possible long-term aging effects. △ Less

Submitted 6 November, 2009; originally announced November 2009.

Journal ref: JINST 5:P02007,2010

Hadron Showers in a Digital Hadron Calorimeter

Authors: Burak Bilki, John Butler, Georgios Mavromanolakis, Ed May, Edwin Norbeck, Jose Repond, David Underwood, Lei Xia, Qingmin Zhang

Abstract: A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positive pions of 1 >. 16 GeV energy from the Fermilab test beam. The event selection separates events with mostly non-interacting particles and events with hadronic showers which initiated in the front part of the calorimeter. The data are compared to a Monte Carlo… ▽ More A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positive pions of 1 >. 16 GeV energy from the Fermilab test beam. The event selection separates events with mostly non-interacting particles and events with hadronic showers which initiated in the front part of the calorimeter. The data are compared to a Monte Carlo simulation of the set-up. The paper concludes with predictions for the performance of an extended digital hadron calorimeter. △ Less

Submitted 28 August, 2009; originally announced August 2009.

Measurement of Positron Showers with a Digital Hadron Calorimeter

Authors: Burak Bilki, John Butler, Ed May, Georgios Mavromanolakis, Edwin Norbeck, Jose Repond, David Underwood, Lei Xia, Qingmin Zhang

Abstract: A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positrons of 1 . 16 GeV energy from the Fermilab test beam. The response function, energy resolution, as well as measurements of the shape of electromagnetic showers are presented. The data are compared to a Monte Carlo simulation of the set-up. A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positrons of 1 . 16 GeV energy from the Fermilab test beam. The response function, energy resolution, as well as measurements of the shape of electromagnetic showers are presented. The data are compared to a Monte Carlo simulation of the set-up. △ Less

Submitted 10 February, 2009; originally announced February 2009.

Journal ref: JINST 4:P04006,2009

Measurement of the Rate Capability of Resistive Plate Chambers

Authors: B. Bilki, J. Butler, E. May, G. Mavromanolakis, E. Norbeck, J. Repond, D. Underwood, L. Xia, Q. Zhang

Abstract: This paper reports on detailed measurements of the performance of Resistive Plate Chambers in a proton beam with variable intensity. Short term effects, such as dead time, are studied using consecutive events. On larger time scales, for various beam intensities the chamber.s efficiency is studied as a function of time within a spill of particles. The correlation between the efficiency of chamber… ▽ More This paper reports on detailed measurements of the performance of Resistive Plate Chambers in a proton beam with variable intensity. Short term effects, such as dead time, are studied using consecutive events. On larger time scales, for various beam intensities the chamber.s efficiency is studied as a function of time within a spill of particles. The correlation between the efficiency of chambers placed in the same beam provides an indication of the lateral size of the observed effects. The measurements are compared to the predictions of a simple model based on the assumption that the resistive plates behave as pure resistors. △ Less

Submitted 27 January, 2009; originally announced January 2009.

Journal ref: JINST 4:P06003,2009

The Forward GEM Tracker of STAR at RHIC

Authors: F. Simon, J. Balewski, R. Fatemi, D. Hasell, J. Kelsey, R. Majka, B. Page, M. Plesko, D. Underwood, N. Smirnov, J. Sowinski, H. Spinka, B. Surrow, G. Visser

Abstract: The STAR experiment at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) is in the process of designing and constructing a forward tracking system based on triple GEM technology. This upgrade is necessary to give STAR the capability to reconstruct and identify the charge sign of W bosons over an extended rapidity range through their leptonic decay mode into an el… ▽ More The STAR experiment at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) is in the process of designing and constructing a forward tracking system based on triple GEM technology. This upgrade is necessary to give STAR the capability to reconstruct and identify the charge sign of W bosons over an extended rapidity range through their leptonic decay mode into an electron (positron) and a neutrino. This will allow a detailed study of the flavor-separated spin structure of the proton in polarized p + p collisions uniquely available at RHIC. The Forward GEM Tracker FGT will consist of six triple GEM disks with an outer radius of ~39 cm and an inner radius of ~10.5 cm, arranged along the beam pipe, covering the pseudo-rapidity range from 1.0 to 2.0 over a wide range of collision vertices. The GEM foils will be produced by Tech-Etch, Inc. Beam tests with test detectors using 10 cm x 10 cm Tech-Etch GEM foils and a two dimensional orthogonal strip readout have demonstrated a spatial resolution of 70 um or better and high efficiency. △ Less

Submitted 14 November, 2008; originally announced November 2008.

Comments: 3 pages, 4 figures, submitted to the Conference Record of the IEEE NSS 2008, Dresden, Germany

Beam Performance of Tracking Detectors with Industrially Produced GEM Foils

Authors: Frank Simon, James Kelsey, Michael Kohl, Richard Majka, Miro Plesko, Tai Sakuma, Nikolai Smirnov, Harold Spinka, Bernd Surrow, David Underwood

Abstract: Three Gas-Electron-Multiplier tracking detectors with an active area of 10 cm x 10 cm and a two-dimensional, laser-etched orthogonal strip readout have been tested extensively in particle beams at the Meson Test Beam Facility at Fermilab. These detectors used GEM foils produced by Tech-Etch, Inc. They showed an efficiency in excess of 95% and spatial resolution better than 70 um. The influence o… ▽ More Three Gas-Electron-Multiplier tracking detectors with an active area of 10 cm x 10 cm and a two-dimensional, laser-etched orthogonal strip readout have been tested extensively in particle beams at the Meson Test Beam Facility at Fermilab. These detectors used GEM foils produced by Tech-Etch, Inc. They showed an efficiency in excess of 95% and spatial resolution better than 70 um. The influence of the angle of incidence of particles on efficiency and spatial resolution was studied in detail. △ Less

Submitted 17 September, 2008; v1 submitted 26 August, 2008; originally announced August 2008.

Comments: 8 pages, 9 figures, accepted by Nuclear Instruments and Methods in Physics Research A

New Prototype Multi-gap Resistive Plate Chambers with Long Strips

Authors: Y. J. Sun, C. Li, M. Shao, B. Gui, Y. E. Zhao, H. F. Chen, Z. B. Xu, L. J. Ruan, G. J. Lin, X. Wang, Y. Wang, Z. B. Tang, G. Eppley, P. Fachini, M. Kohl, J. Liu, W. J. Llope, R. Majka, T. Nussbaun, E. Ramberg, T. Sakuma, F. Simon, N. Smirnov, B. Surrow, D. Underwood

Abstract: A new kind of Multi-gap Resistive Plate Chamber (MRPC) has been built for the large-area Muon Telescope Detector (MTD) for the STAR experiment at RHIC. These long read-out strip MRPCs (LMRPCs) have an active area of 87.0 x 17.0 cm2 and ten 250 um-thick gas gaps arranged as a double stack. Each read-out strip is 2.5 cm wide and 90 cm long. The signals are read-out at both ends of each strip. Cosm… ▽ More A new kind of Multi-gap Resistive Plate Chamber (MRPC) has been built for the large-area Muon Telescope Detector (MTD) for the STAR experiment at RHIC. These long read-out strip MRPCs (LMRPCs) have an active area of 87.0 x 17.0 cm2 and ten 250 um-thick gas gaps arranged as a double stack. Each read-out strip is 2.5 cm wide and 90 cm long. The signals are read-out at both ends of each strip. Cosmic ray tests indicate a time resolution of ~70 ps and a detection efficiency of greater than 95%. Beam tests performed at T963 at Fermilab indicate a time resolution of 60-70 ps and a spatial resolution of ~1 cm along the strip direction. △ Less

Submitted 16 May, 2008; originally announced May 2008.

Comments: 9 pages, 13 figures, submitted to Nucl. Instr. and Meth. A

Journal ref: Nucl.Instrum.Meth.A593:307-313,2008

Calibration of a digital hadron calorimeter with muons

Authors: B. Bilki, J. Butler, T. Cundiff, G. Drake, W. Haberichter, E. Hazen, J. Hoff, S. Holm, A. Kreps, E. May, G. Mavromanolakis, E. Norbeck, D. Northacker, Y. Onel, J. Repond, D. Underwood, S. Wu, L. Xia

Abstract: The calibration procedure of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements is described. Results obtained with a stack of nine layers exposed to muons from the Fermilab test beam are presented. The calibration procedure of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements is described. Results obtained with a stack of nine layers exposed to muons from the Fermilab test beam are presented. △ Less

Submitted 17 April, 2008; v1 submitted 22 February, 2008; originally announced February 2008.

Journal ref: JINST 3:P05001,2008

Triple GEM Detectors for the Forward Tracker in STAR

Authors: Frank Simon, James Kelsey, Michael Kohl, Richard Majka, Miroslav Plesko, David Underwood, Tai Sakuma, Nikolai Smirnov, Harold Spinka, Bernd Surrow

Abstract: Future measurements of the flavor-separated spin structure of the proton via parity-violating W boson production at RHIC require an upgrade of the forward tracking system of the STAR detector. This upgrade will allow the reconstruction of the charge sign of electrons and positrons produced from decaying W bosons. A design based on six large area triple GEM disks using GEM foils produced by Tech-… ▽ More Future measurements of the flavor-separated spin structure of the proton via parity-violating W boson production at RHIC require an upgrade of the forward tracking system of the STAR detector. This upgrade will allow the reconstruction of the charge sign of electrons and positrons produced from decaying W bosons. A design based on six large area triple GEM disks using GEM foils produced by Tech-Etch Inc. has emerged as a cost-effective solution to provide the necessary tracking precision. We report first results from a beam test of three test detectors using Tech-Etch produced GEM foils and a laser etched two dimensional strip readout. The detectors show good operational stability, high efficiency and a spacial resolution of around 70 um or better, exceeding the requirements for the forward tracking upgrade. The influence of the angle of incidence of the particles on the spatial resolution of the detectors has also been studied in detail. △ Less

Submitted 23 November, 2007; originally announced November 2007.

Comments: 5 pages, 8 figures, presented at the IEEE Nuclear Science Symposium in Honolulu, HI, USA, October 27 - November 3, 2007