Showing 1–5 of 5 results for author: Tu, D

Organic electrochemical neurons and synapses with ion mediated spiking

Authors: H. Padinhare, C. Yang, D. Tu, J. Gerasimov, A. M. M. Dar, A. A. Moreira, M. Massetti, R. Kroon, D. Bliman, R. Olsson, E. Stavrinidou, M. Berggren, S. Fabiano

Abstract: Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio… ▽ More Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio-integration potential. Here, we report the first organic electrochemical neurons (OECNs) with ion-modulated spiking, based on allprinted complementary organic electrochemical transistors. We demonstrate facile biointegration of OECNs with Venus Flytrap (Dionaea muscipula) to induce lobe closure upon input stimuli. The OECNs can also be integrated with all-printed organic electrochemical synapses (OECSs), exhibiting short-term plasticity with paired-pulse facilitation and longterm plasticity with retention >1000 s, facilitating Hebbian learning. These soft and flexible OECNs operate below 0.6 V and respond to multiple stimuli, defining a new vista for localized artificial neuronal systems possible to integrate with bio-signaling systems of plants, invertebrates, and vertebrates. △ Less

Submitted 18 January, 2024; originally announced March 2024.

Synergistic Effect of Multi-Walled Carbon Nanotubes and Ladder-Type Conjugated Polymers on the Performance of N-Type Organic Electrochemical Transistors

Authors: S. Zhang, M. Massetti, T. P. Ruoko, D. Tu, C. Y. Yang, X. Liu, Z. Wu, Y. Lee, R. Kroon, P. Persson, H. Y. Woo, M. Berggren, C. Müller, M. Fahlman, S. Fabiano

Abstract: Organic electrochemical transistors (OECTs) have the potential to revolutionize the field of organic bioelectronics. To date, most of the reported OECTs include p-type (semi-)conducting polymers as the channel material, while n-type OECTs are yet at an early stage of development, with the best performing electron-transporting materials still suffering from low transconductance, low electron mobili… ▽ More Organic electrochemical transistors (OECTs) have the potential to revolutionize the field of organic bioelectronics. To date, most of the reported OECTs include p-type (semi-)conducting polymers as the channel material, while n-type OECTs are yet at an early stage of development, with the best performing electron-transporting materials still suffering from low transconductance, low electron mobility, and slow response time. Here, the high electrical conductivity of multi-walled carbon nanotubes (MWCNTs) and the large volumetric capacitance of the ladder-type π-conjugated redox polymer poly(benzimidazobenzophenanthroline) (BBL) are leveraged to develop n-type OECTs with record-high performance. It is demonstrated that the use of MWCNTs enhances the electron mobility by more than one order of magnitude, yielding fast transistor transient response (down to 15 ms) and high uC* (electron mobility x volumetric capacitance) of about 1 F/cmVs. This enables the development of complementary inverters with a voltage gain of > 16 and a large worst-case noise margin at a supply voltage of < 0.6 V, while consuming less than 1 uW of power. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Fully 3D-Printed Organic Electrochemical Transistors

Authors: Matteo Massetti, Silan Zhang, Harikesh Padinare, Bernhard Burtscher, Chiara Diacci, Daniel T. Simon, Xianjie Liu, Mats Fahlman, Deyu Tu, Magnus Berggren, Simone Fabiano

Abstract: Organic electrochemical transistors (OECTs) are currently being investigated for various applications, ranging from sensors to logics and neuromorphic hardware. The fabrication process must be compatible with flexible and scalable digital techniques to address this wide spectrum of applications. Here, we report a direct-write additive process to fabricate fully 3D printed OECTs. We developed 3D pr… ▽ More Organic electrochemical transistors (OECTs) are currently being investigated for various applications, ranging from sensors to logics and neuromorphic hardware. The fabrication process must be compatible with flexible and scalable digital techniques to address this wide spectrum of applications. Here, we report a direct-write additive process to fabricate fully 3D printed OECTs. We developed 3D printable conducting, semiconducting, insulating, and electrolyte inks to achieve this. The 3D-printed OECTs, operating in the depletion mode, can be fabricated on thin and flexible substrates, yielding high mechanical and environmental stability. We also developed a 3D printable nanocellulose formulation for the OECT substrate, demonstrating one of the first examples of fully 3D printed electronic devices. Good dopamine biosensing capabilities (limit of detection down to 6 uM without metal gate electrodes) and long-term (~1 hour) synapses response underscore that the present OECT manufacturing strategy is suitable for diverse applications requiring rapid design change and digitally enabled direct-write techniques. △ Less

Submitted 14 September, 2022; originally announced September 2022.

Photonic sampled and quantized analog-to-digital converters on thin-film lithium niobate platform

Authors: Donghe Tu, Xingrui Huang, Yang Liu, Zhiguo Yu, Zhiyong Li

Abstract: In this paper, an on-chip photonic sampled and quantized analog-to-digital converter (ADC) on thin-film lithium niobate platform is experimentally demonstrated. Using two phase modulators as a sampler and a 5$\times$5 multimode interference (MMI) coupler as a quantizer, an 1 GHz sinusoidal analog input signal was successfully converted to a digitized output with a 20 GSample/s sampling rate. To ev… ▽ More In this paper, an on-chip photonic sampled and quantized analog-to-digital converter (ADC) on thin-film lithium niobate platform is experimentally demonstrated. Using two phase modulators as a sampler and a 5$\times$5 multimode interference (MMI) coupler as a quantizer, an 1 GHz sinusoidal analog input signal was successfully converted to a digitized output with a 20 GSample/s sampling rate. To evaluate the system performance, the quantization curves together with the transfer function of the ADC were measured. The experimental effective number of bits (ENOB) was 3.17 bit. The demonstrated device is capable of operating at a high frequency up to 70 GHz, making it a promising solution for on-chip ultra-high speed analog-to-digital conversion. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Low-power/high-gain flexible complementary circuits based on printed organic electrochemical transistors

Authors: Chi-Yuan Yang, Deyu Tu, Tero-Petri Ruoko, Jennifer Y. Gerasimov, Han-Yan Wu, P. C. Harikesh, Renee Kroon, Christian Müller, Magnus Berggren, Simone Fabiano

Abstract: The ability to accurately extract low-amplitude voltage signals is crucial in several fields, ranging from single-use diagnostics and medical technology to robotics and the Internet of Things. The organic electrochemical transistor, which features large transconductance values at low operation voltages, is ideal for monitoring small signals. Its large transconductance translates small gate voltage… ▽ More The ability to accurately extract low-amplitude voltage signals is crucial in several fields, ranging from single-use diagnostics and medical technology to robotics and the Internet of Things. The organic electrochemical transistor, which features large transconductance values at low operation voltages, is ideal for monitoring small signals. Its large transconductance translates small gate voltage variations into significant changes in the drain current. However, a current-to-voltage conversion is further needed to allow proper data acquisition and signal processing. Low power consumption, high amplification, and manufacturability on flexible and low-cost carriers are also crucial and highly anticipated for targeted applications. Here, we report low-power and high-gain flexible circuits based on printed complementary organic electrochemical transistors (OECTs). We leverage the low threshold voltage of both p-type and n-type enhancement-mode OECTs to develop complementary voltage amplifiers that can sense voltages as low as 100 $μ$V, with gains of 30.4 dB and at a power consumption < 2.7 $μ$W (single-stage amplifier). At the optimal operating conditions, the voltage gain normalized to power consumption reaches 169 dB/$μ$W, which is > 50 times larger than state-of-the-art OECT-based amplifiers. In a two-stage configuration, the complementary voltage amplifiers reach a DC voltage gain of 193 V/V, which is the highest among emerging CMOS-like technologies operating at supply voltages below 1 volt. Our findings demonstrate that flexible complementary circuits based on printed OECTs define a power-efficient platform for sensing and amplifying low-amplitude voltage signals in several emerging beyond-silicon applications. △ Less

Submitted 14 June, 2021; originally announced June 2021.