The influence of Bi2O3 glass powder in silver paste on the fabrication of ohmic contacts and its potential effectiveness in solar cells and integrated circuits on p-type silicon substrates
Authors:
Jung Ting Tsai,
Li Kai Lin,
Shun Tian Lin,
Lia Stanciu,
Martin Byung Guk Jun
Abstract:
The present work critically investigates the influence of low melting glasses on the fabrication of metal contacts, with the goal of advancing applications of bismuth based oxide glass and screen printed silver contacts for use in integrated circuits (ICs), solar cells, and sensors. In this study, novel electrode contacts were fabricated by screen printing composite pastes composed of mainly silve…
▽ More
The present work critically investigates the influence of low melting glasses on the fabrication of metal contacts, with the goal of advancing applications of bismuth based oxide glass and screen printed silver contacts for use in integrated circuits (ICs), solar cells, and sensors. In this study, novel electrode contacts were fabricated by screen printing composite pastes composed of mainly silver powder, Bi2O3 glass powder, and acyclic binder, and then firing the pastes in a belt furnace. The microstructures of the composite films after firing at 830 to 890 °C were observed under different corrosion conditions, and the resulting layers were analyzed with X ray diffraction (XRD) and the transfer length method (TLM). A series of investigations to determine the influence of Bi2O3 glass in silver paste involved various tests, including differential thermal analysis (DTA), scanning electron microscopy (SEM), electron probe X ray microanalysis (EPMA), secondary ion mass spectrometry (SIMS) and transmission electron microscopy (TEM), to determine the effects of Bi2O3 mixed with silver and the efficacy of the resulting metal contacts in IC fabrications. It was observed that the additive, Bi2O3 glass, controlled the melting of the silver into the glass, influencing the precipitation of Ag crystallites. In addition, an increase in the firing temperature caused excessive growth of Ag crystallites and current leakage, and the size and the relationship of the Ag crystallites in the Bi2O3 glass were confirmed.
△ Less
Submitted 23 August, 2020;
originally announced August 2020.
Cost-Effective Methods to Nanopattern Thermally Stable Platforms on Kapton HN Flexible Films Using Inkjet Printing Technology to Produce Printable Nitrate Sensors, Mercury Aptasensors, Protein Sensors, and Organic Thin Film Transistors
Authors:
Li Kai Lin,
Jung Ting Tsai,
Susana Diaz Amaya,
Muhammed R Oduncu,
Yifan Zhang,
Peng Yuan Huang,
Carlos Ostos,
Jacob P Schmelzel,
Raheleh Mohammadrahimi,
Pengyu Xu,
Nithin Raghunathan,
Xinghang Zhang,
Alexander Wei,
David Bahr,
Dimitrios Peroulis,
Lia A Stanciu
Abstract:
Kapton HN films, adopted worldwide due to their superior thermal durability (up to 400 °C), allow the high temperature sintering of nanoparticle based metal inks. By carefully selecting inks and Kapton substrates, outstanding thermal stability and anti-delaminating features are obtained in both aqueous and organic solutions and were applied to four novel devices: a solid state ion selective nitrat…
▽ More
Kapton HN films, adopted worldwide due to their superior thermal durability (up to 400 °C), allow the high temperature sintering of nanoparticle based metal inks. By carefully selecting inks and Kapton substrates, outstanding thermal stability and anti-delaminating features are obtained in both aqueous and organic solutions and were applied to four novel devices: a solid state ion selective nitrate sensor, an ssDNA based mercury aptasensor, a low cost protein sensor, and a long lasting organic thin film transistor (OTFT). Many experimental studies on parameter combinations were conducted during the development of the above devices. The results showed that the ion selective nitrate sensor displayed a linear sensitivity range with a limit of detection of 2 ppm. The mercury sensor exhibited a linear correlation between the RCT values and the increasing concentrations of mercury. The protein printed circuit board (PCB) sensor provided a much simpler method of protein detection. Finally, the OTFT demonstrated a stable performance with mobility values for the linear and saturation regimes, and the threshold voltage. These devices have shown their value and reveal possibilities that could be pursued.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
