Showing 1–21 of 21 results for author: Tsai, H

Multi-messenger dynamic imaging of laser-driven shocks in water using a plasma wakefield accelerator

Authors: Mario D. Balcazar, Hai-En Tsai, Tobias Ostermayr, Paul T. Campbell, Qiang Chen, Cary Colgan, Gillis M. Dyer, Zachary Eisentraut, Eric Esarey, Cameron G. R. Geddes, Benjamin Greenwood, Anthony Gonsalves, Sahel Hakimi, Robert Jacob, Brendan Kettle, Paul King, Karl Krushelnick, Nuno Lemos, Eva Los, Yong Ma, Stuart P. D. Mangles, John Nees, Isabella M. Pagano, Carl Schroeder, Raspberry Simpson , et al. (5 additional authors not shown)

Abstract: Understanding dense matter hydrodynamics is critical for predicting plasma behavior in environments relevant to laser-driven inertial confinement fusion. Traditional diagnostic sources face limitations in brightness, spatiotemporal resolution, and inability to detect relevant electromagnetic fields. In this work, we present a dual-probe, multi-messenger laser wakefield accelerator platform combini… ▽ More Understanding dense matter hydrodynamics is critical for predicting plasma behavior in environments relevant to laser-driven inertial confinement fusion. Traditional diagnostic sources face limitations in brightness, spatiotemporal resolution, and inability to detect relevant electromagnetic fields. In this work, we present a dual-probe, multi-messenger laser wakefield accelerator platform combining ultrafast X-rays and relativistic electron beams at 1 Hz, to interrogate a free-flowing water target in vacuum, heated by an intense 200 ps laser pulse. This scheme enables high-repetition-rate tracking of the interaction evolution using both particle types. Betatron X-rays reveal a cylindrically symmetric shock compression morphology assisted by low-density vapor, resembling foam-layer-assisted fusion targets. The synchronized electron beam detects time-evolving electromagnetic fields, uncovering charge separation and ion species differentiation during plasma expansion - phenomena not captured by photons or hydrodynamic simulations. We show that combining both probes provides complementary insights spanning kinetic to hydrodynamic regimes, highlighting the need for hybrid physics models to accurately predict fusion-relevant plasma behavior △ Less

Submitted 3 July, 2025; originally announced July 2025.

Comments: 34 pages, 12 figures total (6 in main article, 6 in extended data)

Flexible BiSel/NiO-based X-ray synapses bridging the functions of detection and memory

Authors: Qiao Wang, Pengfei Li, Yushou Song, Jalu Li, Haiying Xiao, Yuqing Wang, Guoliang Ma, Hsu-Sheng Tsai, Ping-An Hu

Abstract: Currently, the X-ray detectors are widely used in medical imaging, industrial inspection, aerospace, and other fields, as the market demand for high-efficiency, flexible, and low-power detectors is increased. Although the traditional inorganic X-ray detection materials have achieved great success and effectiveness, they have their own limitations and let alone flexibility/bendability and memory fu… ▽ More Currently, the X-ray detectors are widely used in medical imaging, industrial inspection, aerospace, and other fields, as the market demand for high-efficiency, flexible, and low-power detectors is increased. Although the traditional inorganic X-ray detection materials have achieved great success and effectiveness, they have their own limitations and let alone flexibility/bendability and memory function. In this study, we present the design of a BiSeI/NiO-based X-ray synaptic detector and its application in the simulation of biological synaptic processes. Herein, the BiSeI, a quasi-1D inorganic semiconductor, stands out as an ideal choice for the X-ray detectors, especially for flexible and portable devices due to its large atomic number, large photoelectric absorption coefficient, and mechanical plasticity. Meanwhile, the NiO-based materials provide the memory function required for the intelligent detection systems. Moreover, our devices offer notable advantages in terms of low power consumption, compared with traditional X-ray detectors. The BiSeI/NiO detectors demonstrate advanced features with an ultrahigh sensitivity, an ultralow detection limit, and include the paired-pulse facilitation (PPF) and the transition from short- to long-term memory, maintaining the functionality on flexible substrates. This design represents a significant step toward the development of intelligent and flexible X-ray detectors. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Comments: 23 pages, 6 figures

Chirality transfer from chiral perovskite to molecular dopants via charge transfer states

Authors: Guan-Lin Chen, Hsinhan Tsai, Aaron Forde, Kai-Wei Tseng, Zhe-Yu Liu, Chi-An Dai, Tong Xiao, Mircea Coltlet, Leeyih Wang, Sergei Tretiak, Wanyi Nie

Abstract: Chiral perovskites are emerging semiconducting materials with broken symmetry that can selectively absorb and emit circularly polarized light. However, most of the chiral perovskites are typically low-dimensional structures with limited electrical conductivity and their light absorption occurs in the UV region. In this work, we find doping 2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TC… ▽ More Chiral perovskites are emerging semiconducting materials with broken symmetry that can selectively absorb and emit circularly polarized light. However, most of the chiral perovskites are typically low-dimensional structures with limited electrical conductivity and their light absorption occurs in the UV region. In this work, we find doping 2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) in the chiral perovskite matrix can improve the electrical conductivity with an addition of visible light absorption through the emerging charge-transfer electronic states. The new absorption feature exhibits strong circular dichroism adapted from the chiral matrix, which is indicative of a chirality transfer from the host to the guest via an electronic coupling. The charge transfer state is validated by transient absorption spectroscopy and theory modeling. Quantum-chemical modeling identifies a strong wave function overlap between an electron and a hole of the guest-host in a closely packed crystal configuration forming the charge-transfer absorption state. We then integrate the doped chiral perovskite film in photodetectors and demonstrate a selective detection of circularly polarized light both in the UV and visible range. Our results suggest a universal approach of introducing visible photo absorption states to the chiral matrix to broaden the optical active range and enhance the conductivity. △ Less

Submitted 15 January, 2025; originally announced January 2025.

Longitudinal tapering in meter-scale gas jets for increased efficiency of laser plasma accelerators

Authors: R. Li, A. Picksley, C. Benedetti, F. Filippi, J. Stackhouse, L. Fan-Chiang, H. E. Tsai, K. Nakamura, C. B. Schroeder, J. van Tilborg, E. Esarey, C. G. R. Geddes, A. J. Gonsalves

Abstract: Modern laser plasma accelerators (LPAs) often require plasma waveguides tens of cm long to propagate a high-intensity drive laser pulse. Tapering the longitudinal gas density profile in 10 cm scale gas jets could allow for single stage laser plasma acceleration well beyond 10 GeV with current petawatt-class laser systems. Via simulation and interferometry measurements, we show density control by l… ▽ More Modern laser plasma accelerators (LPAs) often require plasma waveguides tens of cm long to propagate a high-intensity drive laser pulse. Tapering the longitudinal gas density profile in 10 cm scale gas jets could allow for single stage laser plasma acceleration well beyond 10 GeV with current petawatt-class laser systems. Via simulation and interferometry measurements, we show density control by longitudinally adjusting the throat width and jet angle. Density profiles appropriate for tapering were calculated analytically and via particle-in-cell (PIC) simulations, and were matched experimentally. These simulations show that tapering can increase electron beam energy using 19 J laser energy from ~9 GeV to >12 GeV in a 30 cm plasma, and the accelerated charge by an order of magnitude. This paper was published in Review of Scientific Instruments on April 11, 2025 DOI: https://doi.org/10.1063/5.0250698 △ Less

Submitted 11 April, 2025; v1 submitted 25 November, 2024; originally announced November 2024.

Measurement of directional muon beams generated at the Berkeley Lab Laser Accelerator

Authors: Davide Terzani, Stanimir Kisyov, Stephen Greenberg, Luc Le Pottier, Maria Mironova, Alex Picksley, Joshua Stackhouse, Hai-En Tsai, Raymond Li, Ela Rockafellow, Bo Miao, Jaron Shrock, Timon Heim, Maurice Garcia-Sciveres, Carlo Benedetti, John Valentine, Howard Milchberg, Kei Nakamura, Anthony J. Gonsalves, Jeroen van Tilborg, Carl B. Schroeder, Eric Esarey, Cameron G. R. Geddes

Abstract: We present the detection of directional muon beams produced using a PW laser at the Lawrence Berkeley National Laboratory. The muon source is a multi-GeV electron beam generated in a 30 cm laser plasma accelerator interacting with a high-Z converter target. The GeV photons resulting from the interaction are converted into a high-flux, directional muon beam via pair production. By employing scintil… ▽ More We present the detection of directional muon beams produced using a PW laser at the Lawrence Berkeley National Laboratory. The muon source is a multi-GeV electron beam generated in a 30 cm laser plasma accelerator interacting with a high-Z converter target. The GeV photons resulting from the interaction are converted into a high-flux, directional muon beam via pair production. By employing scintillators to capture delayed events, we were able to identify the produced muons and characterize the source. Using theoretical knowledge of the muon production process combined with simulations that are in excellent agreement with the experiments, we demonstrate that the multi-GeV electron beams produce GeV-scale muons in numbers far exceeding those from cosmic background. Laser-plasma-accelerator-based muon sources can therefore enhance muon imaging applications thanks to their compactness, directionality, and high yields, which reduce the exposure time by orders of magnitude compared to cosmic ray muons. Using the Geant4-based simulation code we developed to gain insight into the experimental results, we can design future experiments and applications based on LPA-generated muons. △ Less

Submitted 12 May, 2025; v1 submitted 4 November, 2024; originally announced November 2024.

Matched Guiding and Controlled Injection in Dark-Current-Free, 10-GeV-Class, Channel-Guided Laser Plasma Accelerators

Authors: A. Picksley, J. Stackhouse, C. Benedetti, K. Nakamura, H. E. Tsai, R. Li, B. Miao, J. E. Shrock, E. Rockafellow, H. M. Milchberg, C. B. Schroeder, J. van Tilborg, E. Esarey, C. G. R. Geddes, A. J. Gonsalves

Abstract: We measure the high intensity laser propagation throughout meter-scale, channel-guided LPAs by adjusting the length of the plasma channel on a shot-by-shot basis, showing high quality guiding of 500 TW laser pulses over 30 cm in a hydrogen plasma of density $n_0 \approx 1 \times 10^{17} \, \mathrm{cm^{-3}}$. We observed transverse energy transport of higher-order modes in the first… ▽ More We measure the high intensity laser propagation throughout meter-scale, channel-guided LPAs by adjusting the length of the plasma channel on a shot-by-shot basis, showing high quality guiding of 500 TW laser pulses over 30 cm in a hydrogen plasma of density $n_0 \approx 1 \times 10^{17} \, \mathrm{cm^{-3}}$. We observed transverse energy transport of higher-order modes in the first $\approx 12 \, \mathrm{cm}$ of the plasma channel, followed by quasi-matched propagation, and the gradual, dark-current-free depletion of laser energy to the wakefield. We quantify the laser-to-wake transfer efficiency limitations of currently available PW-class laser systems, and demonstrate via simulation how control over the laser mode can significantly improve accelerated beam parameters. Using just 21.3 J of laser energy, and triggering localized electron injection into the accelerator, we observed electron bunches with single, quasimonoenergetic peaks, relative energy spreads as low as 3 % and energy up to 9.2 GeV with charge extending beyond 10 GeV. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Controlled tempering of lipid concentration and microbubble shrinkage as a possible mechanism for fine-tuning microbubble size and shell properties

Authors: Intesar O. Zalloum, Amin Jafari Sojahrood, Ali A. Paknahad, Michael C. Kolios, Scott S. H. Tsai, Raffi Karshafian

Abstract: The acoustic response of microbubbles (MBs) depends on their resonance frequency, which is dependent on MB size and shell properties. Monodisperse MBs with tunable shell properties are thus desirable for optimizing and controlling MB behavior in acoustics applications. By utilizing a novel microfluidic method that uses lipid concentration to control MB shrinkage, we generate monodisperse MBs of fo… ▽ More The acoustic response of microbubbles (MBs) depends on their resonance frequency, which is dependent on MB size and shell properties. Monodisperse MBs with tunable shell properties are thus desirable for optimizing and controlling MB behavior in acoustics applications. By utilizing a novel microfluidic method that uses lipid concentration to control MB shrinkage, we generate monodisperse MBs of four different initial diameters at three lipid concentrations (5.6, 10.0, and 16.0 mg/mL) in the aqueous phase. Following shrinkage, we measure MB resonance frequency and determine its shell stiffness and viscosity. The study demonstrates that we can generate monodisperse MBs of specific sizes and tunable shell properties by controlling MB initial diameter and aqueous phase lipid concentration. Our results indicate that the resonance frequency increases by 180-210% with increasing lipid concentration (from 5.6 to 16.0 mg/mL) while bubble diameter is kept constant. Results depict that the resonance frequency increases by ~195% with increasing lipid concentration from 5.6 to 16.0 mg/mL, for ~11 um final diameter MBs. Additionally, we find that the resonance frequency decreases by ~275% with increasing MB final diameter from 5 to 12um, when we use a lipid concentration of 5.6 mg/mL. We also determine that MB shell viscosity and stiffness increase with increasing lipid concentration and MB final diameter, and the level of change depends on the degree of shrinkage experienced by MB. Specifically, we find that by increasing the concentration of lipids from 5.6 to 16.0 mg/mL, the shell stiffness and viscosity of ~11 um final diameter MBs increase by ~400% and ~200 %, respectively. This study demonstrates the feasibility of fine-tuning the MB acoustic response to ultrasound by tailoring MB initial diameter and lipid concentration. △ Less

Submitted 25 July, 2023; originally announced July 2023.

Thermal history of matrix forsterite grains from Murchison based on high-resolution tomography

Authors: Giulia Perotti, Henning O. Sørensen, Henning Haack, Anja C. Andersen, Dario Ferreira Sanchez, Elishevah M. M. E. van Kooten, Esther H. R. Tsai, Kim N. Dalby, Mirko Holler, Daniel Grolimund, Tue Hassenkam

Abstract: Protoplanetary disks are dust- and gas-rich structures surrounding protostars. Depending on the distance from the protostar, this dust is thermally processed to different degrees and accreted to form bodies of varying chemical compositions. The primordial accretion processes occurring in the early protoplanetary disk such as chondrule formation and metal segregation are not well understood. One wa… ▽ More Protoplanetary disks are dust- and gas-rich structures surrounding protostars. Depending on the distance from the protostar, this dust is thermally processed to different degrees and accreted to form bodies of varying chemical compositions. The primordial accretion processes occurring in the early protoplanetary disk such as chondrule formation and metal segregation are not well understood. One way to constrain them is to study the morphology and composition of forsteritic grains from the matrix of carbonaceous chondrites. Here, we present high-resolution ptychographic X-ray nanotomography and multimodal chemical micro-tomography (X-ray diffraction and X-ray fluorescence) to reveal the early history of forsteritic grains extracted from the matrix of the Murchison CM2.5 chondrite. The 3D electron density maps revealed, at unprecedented resolution (64~nm), spherical inclusions containing Fe-Ni, very little silica-rich glass and void caps (i.e., volumes where the electron density is consistent with conditions close to vacuum) trapped in forsterite. The presence of the voids along with the overall composition, petrological textures, and shrinkage calculations is consistent with the grains experiencing one or more heating events with peak temperatures close to the melting point of forsterite ($\sim$2100~K) and subsequently cooled and contracted, in agreement with chondrule-forming conditions. △ Less

Submitted 14 September, 2021; originally announced September 2021.

Comments: 15 pages, 11 figures, accepted for publication in ApJ

Effect of Nozzle Curvature on Supersonic Gas Jets Used in Laser-Plasma Acceleration

Authors: Ocean Zhou, Hai-En Tsai, Tobias M. Ostermayr, Liona Fan-Chiang, Jeroen van Tilborg, Carl B. Schroeder, Eric Esarey, Cameron G. R. Geddes

Abstract: Supersonic gas jets produced by converging-diverging (C-D) nozzles are commonly used as targets for laser-plasma acceleration (LPA) experiments. A major point of interest for these targets is the gas density at the region of interaction where the laser ionizes the gas plume to create a plasma, providing the acceleration structure. Tuning the density profiles at this interaction region is crucial t… ▽ More Supersonic gas jets produced by converging-diverging (C-D) nozzles are commonly used as targets for laser-plasma acceleration (LPA) experiments. A major point of interest for these targets is the gas density at the region of interaction where the laser ionizes the gas plume to create a plasma, providing the acceleration structure. Tuning the density profiles at this interaction region is crucial to LPA optimization. A "flat-top" density profile is desired at this line of interaction to control laser propagation and high energy electron acceleration, while a short high-density profile is often preferred for acceleration of lower-energy tightly-focused laser-plasma interactions. A particular design parameter of interest is the curvature of the nozzle's diverging section. We examine three nozzle designs with different curvatures: the concave "bell", straight conical and convex "trumpet" nozzles. We demonstrate that, at mm-scale distances from the nozzle exit, the trumpet and straight nozzles, if optimized, produce "flat-top" density profiles whereas the bell nozzle creates focused regions of gas with higher densities. An optimization procedure for the trumpet nozzle is derived and compared to the straight nozzle optimization process. We find that the trumpet nozzle, by providing an extra parameter of control through its curvature, is more versatile for creating flat-top profiles and its optimization procedure is more refined compared to the straight nozzle and the straight nozzle optimization process. We present results for different nozzle designs from computational fluid dynamics (CFD) simulations performed with the program ANSYS Fluent and verify them experimentally using neutral density interferometry. △ Less

Submitted 15 September, 2021; v1 submitted 27 April, 2021; originally announced April 2021.

Comments: 14 pages, 16 figures, 5 tables

Journal ref: Physics of Plasmas Vol 28, Issue 9, Pg. 093107 (2021)

Development of a PET/EPRI combined imaging system for assessing tumor hypoxia

Authors: Heejong Kim, Boris Epel, Subramanian Sundramoorthy, Hsiu-Ming Tsai, Eugene Barth, Inna Gertsenshteyn, Howard Halpern, Yuexuan Hua, Qingguo Xie, Chin-Tu Chen, Chien-Min Kao

Abstract: Precise quantitative delineation of tumor hypoxia is essential in radiation therapy treatment planning to improve the treatment efficacy by targeting hypoxic sub-volumes. We developed a combined imaging system of positron emission tomography (PET) and electron para-magnetic resonance imaging (EPRI) of molecular oxygen to investigate the accuracy of PET imaging in assessing tumor hypoxia. The PET/E… ▽ More Precise quantitative delineation of tumor hypoxia is essential in radiation therapy treatment planning to improve the treatment efficacy by targeting hypoxic sub-volumes. We developed a combined imaging system of positron emission tomography (PET) and electron para-magnetic resonance imaging (EPRI) of molecular oxygen to investigate the accuracy of PET imaging in assessing tumor hypoxia. The PET/EPRI combined imaging system aims to use EPRI to precisely measure the oxygen partial pressure in tissues. This will evaluate the validity of PET hypoxic tumor imaging by (near) simultaneously acquired EPRI as ground truth. The combined imaging system was constructed by integrating a small animal PET scanner (inner ring diameter 62 mm and axial field of view 25.6 mm) and an EPRI subsystem (field strength 25 mT and resonant frequency 700 MHz). The compatibility between the PET and EPRI subsystems were tested with both phantom and animal imaging. Hypoxic imaging on a tumor mouse model using $^{18}$F-fluoromisonidazole radio-tracer was conducted with the developed PET/EPRI system. We report the development and initial imaging results obtained from the PET/EPRI combined imaging system. △ Less

Submitted 27 January, 2021; originally announced January 2021.

Comments: 12 pages, 6 figures

Billion-pixel X-ray camera (BiPC-X)

Authors: Zhehui Wang, Kaitlin Anagnost, Cris W. Barnes, D. M. Dattelbaum, Eric R. Fossum, Eldred Lee, Jifeng Liu, J. J. Ma, W. Z. Meijer, Wanyi Nie, C. M. Sweeney, Audrey C. Therrien, Hsinhan Tsai, Xin Que

Abstract: The continuing improvement in quantum efficiency (above 90% for single visible photons), reduction in noise (below 1 electron per pixel), and shrink in pixel pitch (less than 1 micron) motivate billion-pixel X-ray cameras (BiPC-X) based on commercial CMOS imaging sensors. We describe BiPC-X designs and prototype construction based on flexible tiling of commercial CMOS imaging sensors with millions… ▽ More The continuing improvement in quantum efficiency (above 90% for single visible photons), reduction in noise (below 1 electron per pixel), and shrink in pixel pitch (less than 1 micron) motivate billion-pixel X-ray cameras (BiPC-X) based on commercial CMOS imaging sensors. We describe BiPC-X designs and prototype construction based on flexible tiling of commercial CMOS imaging sensors with millions of pixels. Device models are given for direct detection of low energy X-rays ($<$ 10 keV) and indirect detection of higher energies using scintillators. Modified Birks's law is proposed for light-yield nonproportionality in scintillators as a function of X-ray energy. Single X-ray sensitivity and spatial resolution have been validated experimentally using laboratory X-ray source and the Argonne Advanced Photon Source. Possible applications include wide field-of-view (FOV) or large X-ray aperture measurements in high-temperature plasmas, the state-of-the-art synchrotron, X-ray Free Electron Laser (XFEL), and pulsed power facilities. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Comments: 6 pages, 8 figures

Report number: LANL report number LA-UR-21-20086

Journal ref: Rev Sci Instrum 92, 043708 (2021)

A target-fixed immersed-boundary formulation for rigid bodies interacting with fluid flow

Authors: Tzu-Yuan Lin, Hsin-Yu Hsieh, Hsieh-Chen Tsai

Abstract: We present an immersed boundary projection method formulated in a body-fixed frame of reference for flow-structure interaction (FSI) problems involving rigid bodies with complex geometries. The body-fixed formulation is aimed at maximizing the accuracy of surface stresses on the FSI body (the target) on during spatial and temporal discretization. The incompressible vorticity equations and Newton's… ▽ More We present an immersed boundary projection method formulated in a body-fixed frame of reference for flow-structure interaction (FSI) problems involving rigid bodies with complex geometries. The body-fixed formulation is aimed at maximizing the accuracy of surface stresses on the FSI body (the target) on during spatial and temporal discretization. The incompressible vorticity equations and Newton's equations of motion are coupled implicitly so that the method remains stable for low solid-to-fluid mass ratios. The influence of fictitious fluid inside the rigid bodies is considered and the spurious oscillations in surface stresses are filtered to impose physically correct rigid body dynamics. Similar to many predecessors of the immersed boundary projection method, the resulting discrete system is solved efficiently using a block-LU decomposition. We then validate the method with two-dimensional test problems of a neutrally buoyant cylinder migrating in a planar Couette flow and a freely falling or rising cylindrical rigid body. △ Less

Submitted 31 December, 2019; originally announced January 2020.

Imaging electric field dynamics with graphene optoelectronics

Authors: Jason Horng, Halleh B. Balch, Allister F. McGuire, Hsin-Zon Tsai, Patrick R. Forrester, Michael F. Crommie, Bianxiao Cui, Feng Wang

Abstract: The use of electric fields for signalling and control in liquids is widespread, spanning bioelectric activity in cells to electrical manipulation of microstructures in lab-on-a-chip devices. However, an appropriate tool to resolve the spatio-temporal distribution of electric fields over a large dynamic range has yet to be developed. Here we present a label-free method to image local electric field… ▽ More The use of electric fields for signalling and control in liquids is widespread, spanning bioelectric activity in cells to electrical manipulation of microstructures in lab-on-a-chip devices. However, an appropriate tool to resolve the spatio-temporal distribution of electric fields over a large dynamic range has yet to be developed. Here we present a label-free method to image local electric fields in real time and under ambient conditions. Our technique combines the unique gate-variable optical transitions of graphene with a critically coupled planar waveguide platform that enables highly sensitive detection of local electric fields with a voltage sensitivity of a few microvolts, a spatial resolution of tens of micrometres and a frequency response over tens of kilohertz. Our imaging platform enables parallel detection of electric fields over a large field of view and can be tailored to broad applications spanning lab-on-a-chip device engineering to analysis of bioelectric phenomena. △ Less

Submitted 20 November, 2019; originally announced November 2019.

Comments: 9 pages, 5 figures, supplement can be found at 10.1038/ncomms13704

Journal ref: Nat Commun 7, 13704 (2016)

Characterization of the $^{12}$C(p,p')$^{12}$C Reaction (E$_p$=19.5$-$30 MeV) for Active Interrogation

Authors: J. Nattress, F. Sutanto, P. -W. Fang, Y. -Z. Chen, A. Chen, K. -Y. Chu, T. S. Duh, H. -Y. Tsai, M. -W. Lin, I. Jovanovic

Abstract: Passive detection of special nuclear material (SNM) is challenging due to its inherently low rate of spontaneous emission of penetrating radiation, the relative ease of shielding, and the fluctuating and frequently overwhelming background. Active interrogation (AI), the use of external radiation to increase the emission rate of characteristic radiation from SNM, has long been considered to be a pr… ▽ More Passive detection of special nuclear material (SNM) is challenging due to its inherently low rate of spontaneous emission of penetrating radiation, the relative ease of shielding, and the fluctuating and frequently overwhelming background. Active interrogation (AI), the use of external radiation to increase the emission rate of characteristic radiation from SNM, has long been considered to be a promising method to overcome those challenges. Current AI systems that incorporate radiography tend to use bremsstrahlung beams, which can deliver high radiation doses. Low-energy ion-driven nuclear reactions that produce multiple monoenergetic photons may be used as an alternative. The $^{12}$C(p,p')$^{12}$C is one such reaction that could produce large gamma-ray yields of highly penetrating 4.4- and 15.1-MeV gamma rays. This reaction does not directly produce neutrons below the $\sim$19.7-MeV threshold, and the 15.1-MeV gamma-ray line is well matched to the photofission cross-section of $^{235}$U and $^{238}$U. We report the measurements of thick-target gamma-ray yields at 4.4 and 15.1 MeV from the $^{12}$C(p,p')$^{12}$C at proton energies of 19.5, 25, and 30 MeV. Measurements were made with two 3'' EJ309 cylindrical liquid scintillation detectors and thermoluminescent dosimeters placed at 0 and 90 degrees. We estimate the highest yields of the 4.4- and 15.1-MeV gamma rays of 1.65$\times10^{10}$ sr$^{-1}μ$ C$^{-1}$ and 4.47$\times10^8$ sr$^{-1}μ$ C$^{-1}$ at a proton energy of 30 MeV, respectively. The yield of 4.4 and 15.1 MeV gamma rays in all experimental configurations is greater than a comparable deuteron-driven reaction that produces the same gamma-ray energies- $^{11}$B(d,n$γ$)$^{12}$C. However, a two orders of magnitude increase of the neutron radiation dose is observed when the proton energy increases from 19.5 to 30 MeV. △ Less

Submitted 27 May, 2020; v1 submitted 13 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. Applied 14, 034043 (2020)

Catalyst-Free And Morphology-Controlled Growth Of 2D Perovskite Nanowires for Polarized Light Detection

Authors: Debjit Ghoshal, Tianmeng Wang, Hsin-Zon Tsai, Shao-Wen Chang Michael Crommie Nikhil Koratkar, Su-Fei Shi

Abstract: Two-dimensional (2D) perovskites or Ruddleson Popper (RP) perovskites have emerged as a class of material inheriting the superior optoelectronic properties of two different materials: perovskites and 2D materials. The large exciton binding energy and natural quantum well structure of 2D perovskite not only make these materials ideal platforms to study light-matter interactions, but also render the… ▽ More Two-dimensional (2D) perovskites or Ruddleson Popper (RP) perovskites have emerged as a class of material inheriting the superior optoelectronic properties of two different materials: perovskites and 2D materials. The large exciton binding energy and natural quantum well structure of 2D perovskite not only make these materials ideal platforms to study light-matter interactions, but also render them suitable for fabrication of various functional optoelectronic devices. Nanoscale structuring and morphology control have led to semiconductors with enhanced functionalities. For example, nanowires of semiconducting materials have been extensively used for important applications like lasing and sensing. Catalyst-assisted Vapor Liquid Solid (VLS) techniques, and template assisted growth, have conventionally been used for nanowire growth. However, catalyst and template-free scalable growth with morphology control of 2D perovskites have remained elusive. In this manuscript, we demonstrate a facile approach for morphology-controlled growth of high-quality nanowires of 2D perovskite, (BA)2PbI4. We demonstrate that the photoluminescence (PL) from the nanowires are highly polarized with a polarization ratio as large as ~ 0.73, which is one of the largest reported for perovskites. We further show that the photocurrent from the device based on the nanowire/graphene heterostructure is also sensitive to the polarization of the incident light with the photocurrent anisotropy ratio of ~3.62 (much larger than the previously reported best value of 2.68 for perovskite nanowires), thus demonstrating the potential of these nanowires as highly efficient photodetectors of polarized light. △ Less

Submitted 13 May, 2019; originally announced May 2019.

Unusual thickness dependence of exciton characteristics in 2D perovskite quantum wells

Authors: J. -C. Blancon, A. V. Stier, H. Tsai, W. Nie, C. C. Stoumpos, B. Traoré, L. Pedesseau, M. Kepenekian, S. Tretiak, S. A. Crooker, C. Katan, M. G. Kanatzidis, J. J. Crochet, J. Even, A. D. Mohite

Abstract: Understanding the nature and energy distribution of optical resonances is of central importance in low-dimensional materials$^{1-4}$ and its knowledge is critical for designing efficient optoelectronic devices. Ruddlesden-Popper halide perovskites are 2D solution-processed quantum wells with a general formula A$_2$A'$_{n-1}$M$_n$X$_{3n+1}$, where optoelectronic properties can be tuned by varying t… ▽ More Understanding the nature and energy distribution of optical resonances is of central importance in low-dimensional materials$^{1-4}$ and its knowledge is critical for designing efficient optoelectronic devices. Ruddlesden-Popper halide perovskites are 2D solution-processed quantum wells with a general formula A$_2$A'$_{n-1}$M$_n$X$_{3n+1}$, where optoelectronic properties can be tuned by varying the perovskite layer thickness (n value), and have recently emerged as efficient semiconductors with technologically relevant stability. However, fundamental questions concerning the nature of optical resonances (excitons or free-carriers) and the exciton reduced mass, and their scaling with quantum well thickness remains unresolved. Here, using optical spectroscopy and 60-Tesla magneto-absorption supported by modelling, we unambiguously demonstrate that the optical resonances arise from tightly bound excitons with unexpectedly high exciton reduced mass (0.20 m0) and binding energies varying from 470 meV to 125 meV with increasing thickness from n=1 to 5. Our work demonstrates the dominant role of Coulomb interactions in 2D solution-processed quantum wells and presents unique opportunities for next-generation optoelectronic and photonic devices. △ Less

Submitted 23 December, 2017; v1 submitted 20 October, 2017; originally announced October 2017.

Comments: 21 pages, 5 figures

Report number: LA-UR-17-29656

Bright 5 - 85 MeV Compton gamma-ray pulses from GeV laser-plasma accelerator and plasma mirror

Authors: J. M. Shaw, A. C. Bernstein, R. Zgadzaj, A. Hannasch, M. LaBerge, Y. Y. Chang, K. Weichman, J. Welch, W. Henderson, H. -E. Tsai, N. Fazel, X. Wang, T. Ditmire, M. Donovan, G. Dyer, E. Gaul, J. Gordon, M. Martinez, M. Spinks, T. Toncian, C. Wagner, M. C. Downer

Abstract: We convert a GeV laser-plasma electron accelerator into a compact femtosecond-pulsed $γ$-ray source by inserting a $100 μ$m-thick glass plate $\sim3$ cm after the accelerator exit. With near-unity reliability, and requiring only crude alignment, this glass plasma mirror retro-reflected spent drive laser pulses (photon energy $\hbarω_L = 1.17$ eV) with $>50\%$ efficiency back onto trailing electron… ▽ More We convert a GeV laser-plasma electron accelerator into a compact femtosecond-pulsed $γ$-ray source by inserting a $100 μ$m-thick glass plate $\sim3$ cm after the accelerator exit. With near-unity reliability, and requiring only crude alignment, this glass plasma mirror retro-reflected spent drive laser pulses (photon energy $\hbarω_L = 1.17$ eV) with $>50\%$ efficiency back onto trailing electrons (peak Lorentz factor $1000 < γ_e < 4400$), creating an optical undulator that generated $\sim10^8 γ$-ray photons with sub-mrad divergence, estimated peak brilliance $\sim10^{21}$ photons/s/mm$^2$/mrad$^2$/$0.1\%$ bandwidth and negligible bremsstrahlung background. The $γ$-ray photon energy $E_γ= 4γ_e^2 \hbarω_L$, inferred from the measured $γ_e$ on each shot, peaked from 5 to 85 MeV, spanning a range otherwise available with comparable brilliance only from large-scale GeV-linac-based high-intensity $γ$-ray sources. △ Less

Submitted 24 May, 2017; originally announced May 2017.

Self-aligning concave relativistic plasma mirror with adjustable focus

Authors: Hai-En Tsai, Alexey V. Arefiev, Joseph M. Shaw, David J. Stark, Xiaoming Wang, Rafal Zgadzaj, M. C. Downer

Abstract: We report an experimental-computational study of the optical properties of plasma mirrors (PMs) at the incident laser frequency when irradiated directly at relativistic intensity (1e18 < I_0 < 1e19 W/cm^2) by near-normally incident (4 degree), high-contrast, 30 fs, 800 nm laser pulses. We find that such relativistic PMs are highly reflective (0.6 to 0.8), and focus a significant fraction of reflec… ▽ More We report an experimental-computational study of the optical properties of plasma mirrors (PMs) at the incident laser frequency when irradiated directly at relativistic intensity (1e18 < I_0 < 1e19 W/cm^2) by near-normally incident (4 degree), high-contrast, 30 fs, 800 nm laser pulses. We find that such relativistic PMs are highly reflective (0.6 to 0.8), and focus a significant fraction of reflected light to intensity as large as 10I_0 at distance f as small 25 microns from the PM, provided that pre-pulses do not exceed 1e14 W/cm^2 prior to 20 ps before arrival of the main pulse peak. Particle-in-cell simulations show that focusing results from denting of the reflecting surface by light pressure combined with relativistic transparency, and that reflectivity and f can be adjusted by controlling pre-plasma length L over the range 0.5 < L < 3 microns. Pump-probe reflectivity measurements show the PM's focusing properties evolve on a ps time scale. △ Less

Submitted 6 October, 2016; originally announced October 2016.

Comments: 11 pages, 10 figures

Journal ref: Phys. Plasmas 24, 013106 (2017)

Compact tunable Compton x-ray source from laser-plasma accelerator and plasma mirror

Authors: Hai-En Tsai, Xiaoming Wang, Joseph Shaw, Zhengyan Li, Alexey V. Arefiev, Xi Zhang, Rafal Zgadzaj, Watson Henderson, V. Khudik, G. Shvets, M. C. Downer

Abstract: We present an in-depth experimental-computational study of the parameters necessary to optimize a tunable, quasi-monoenergetic, efficient, low-background Compton backscattering (CBS) x-ray source that is based on the self-aligned combination of a laser-plasma accelerator (LPA) and a plasma mirror (PM). The main findings are: (1) an LPA driven in the blowout regime by 30 TW, 30 fs laser pulses prod… ▽ More We present an in-depth experimental-computational study of the parameters necessary to optimize a tunable, quasi-monoenergetic, efficient, low-background Compton backscattering (CBS) x-ray source that is based on the self-aligned combination of a laser-plasma accelerator (LPA) and a plasma mirror (PM). The main findings are: (1) an LPA driven in the blowout regime by 30 TW, 30 fs laser pulses producesnot only a high-quality, tunable, quasi-monoenergetic electron beam, but also a high-quality, relativistically intense (a0~1) spent drive pulse that remains stable in profile and intensity over the LPA tuning range. (2) A thin plastic film near the gas jet exit retro-reflects the spent drive pulse efficiently into oncoming electrons to produce CBS x-rays without detectable bremsstrahlung background. Meanwhile anomalous far-field divergence of the retro-reflected light demonstrates relativistic "denting" of the PM. Exploiting these optimized LPA and PM conditions, we demonstrate quasi-monoenergetic (50% FWHM energy spread), tunable (75 to 200 KeV) CBS x-rays, characteristics previously achieved only on more powerful laser systems by CBS of a split-off, counter-propagating pulse. Moreover, laser-to-x-ray photon conversion efficiency ~6e12 exceeds that of any previous LPA-based quasi-monoenergetic Compton source. Particle-in-cell simulations agree well with the measurements. △ Less

Submitted 14 January, 2015; v1 submitted 8 November, 2014; originally announced November 2014.

Comments: 10 pages, 7 figures

Simulations of Detonation Wave Propagation in Rectangular Ducts Using a Three-Dimensional WENO Scheme

Authors: Hua-Shu Dou, Her Mann Tsai, Boo Cheong Khoo, Jianxian Qiu

Abstract: This paper reports high resolution simulations using a fifth-order weighted essentially non-oscillatory (WENO) scheme with a third order TVD Runge-Kutta time stepping method to examine the features of detonation front and physics in square ducts. The simulations suggest that two and three-dimensional detonation wave front formations are greatly enhanced by the presence of transverse waves. The mot… ▽ More This paper reports high resolution simulations using a fifth-order weighted essentially non-oscillatory (WENO) scheme with a third order TVD Runge-Kutta time stepping method to examine the features of detonation front and physics in square ducts. The simulations suggest that two and three-dimensional detonation wave front formations are greatly enhanced by the presence of transverse waves. The motion of transverse waves generates triple points (zones of high pressure and large velocity coupled together), which cause the detonation front to become locally overdriven and thus form "hot spots". The transversal motion of these hot spots maintains the detonation to continuously occur along the whole front in two and three-dimensions. The present simulations indicate that the influence of the transverse waves on detonation is more profound in three dimensions and the pattern of quasi-steady detonation fronts also depends on the duct size. For a narrow duct (4LX4L where L is the half reaction length), the detonation front displays a distinctive "spinning" motion about the axial direction with a well-defined period. For a wider duct (20LX20L), the detonation front exhibits a "rectangular mode" periodically, with the front displaying "convex" and "concave" shapes one following the other and the transverse waves on the four walls being partly out-of-phase with each other. △ Less

Submitted 7 June, 2010; originally announced June 2010.

Comments: 31 pages. 14 figuees

Journal ref: Combustion & Flame, Vol.154, 2008, pp.644-659

Determining the Critical Condition for Flow Transition in a Full-Developed Annulus Flow

Authors: Hua-Shu Dou, Boo Cheong Khoo, Her Mann Tsai

Abstract: Axial flow in an annulus between two concentric cylinders is commonly seen in various flow devices used in chemical processing industries and petroleum science and engineering. The flow state in the annulus strongly influences the performance of fluid transportation in the devices. Therefore, the determination of flow state which is laminar flow or turbulent flow is an important task to predict th… ▽ More Axial flow in an annulus between two concentric cylinders is commonly seen in various flow devices used in chemical processing industries and petroleum science and engineering. The flow state in the annulus strongly influences the performance of fluid transportation in the devices. Therefore, the determination of flow state which is laminar flow or turbulent flow is an important task to predict the performance of the flow devices. In previous works, we have proposed an energy gradient method for studying the flow instability and turbulent transition. In this method, it is shown that the flow instability and turbulent transition in wall bounded shear flows depend on the relative magnitude of the gradient of the total mechanical energy in transverse direction and the rate of loss of the total mechanical energy along the streamwise direction for a given imposed disturbance. For pipe and plane Poiseuille flows, it has been demonstrated that the transition to turbulence for these wall bounded parallel flows occurs at a consistent value of the energy gradient parameter (Kmax). In present study, the critical condition for turbulent transition in annulus flow is calculated with the energy gradient method for various radius ratios. The critical flow rate and critical Reynolds number are given for various radius ratios. Then, the analytical results are compared with the experiments in the literature. Finally, the implication of the result is discussed in terms of the drag reduction and mixing as well as heat transfer in practical industrial applications of various fluid delivery devices. △ Less

Submitted 7 June, 2010; v1 submitted 27 April, 2005; originally announced April 2005.

Comments: 20 gapes; 4 figures (2010, in press)

Journal ref: Journal of Petrolum Science and Engineering, Vol.71, 2010