-
What it takes to break a liquid: analysis of the cavitation threshold in various media
Authors:
Gianmaria Viciconte,
Paolo Guida,
Tadd T. Truscott,
William L. Roberts
Abstract:
Cavitation has historically been related to parameters measured at equilibrium, such as vapor pressure and surface tension. However, nucleation might occur when the liquid is metastable, especially for fast phenomena such as cavitation induced by high-frequency acoustic waves. This is one of the reasons for the large discrepancy between the experimental estimate of the cavitation threshold and the…
▽ More
Cavitation has historically been related to parameters measured at equilibrium, such as vapor pressure and surface tension. However, nucleation might occur when the liquid is metastable, especially for fast phenomena such as cavitation induced by high-frequency acoustic waves. This is one of the reasons for the large discrepancy between the experimental estimate of the cavitation threshold and the theory's predictions.
Our investigation aims to identify nucleation thresholds in various substances characterized by different physical properties. The experiments were performed by initiating nucleation through ultrasound at 24 kHz. The cavitation onset was studied using a novel procedure based on high-speed imaging and acoustic measurements with a hydrophone. Combining these two techniques allowed us to define the exact instant cavitation occurred in the liquid medium. The bubble nucleation was framed at 200,000 fps with a spatial resolution in the order of micrometers. Such fine temporal and spatial resolutions allowed us to track the expansion of the cavitation bubble right after its onset. We tested five different substances and tracked the amplitude of the transducer oscillation to reconstruct the pressure field when cavitation occurs. This allows us to identify the liquid's acoustic cavitation threshold (tensile strength). The data collected confirmed that the vapor pressure is not a good indicator of the occurrence of cavitation for acoustic systems. Furthermore, all substances exhibit similar behavior despite their different physical properties. This might seem counterintuitive, but it sheds light on the nucleation mechanism that originates cavitation in a lab-scale acoustic system.
△ Less
Submitted 15 April, 2025;
originally announced April 2025.
-
High-speed imaging and coumarin dosimetry of horn type ultrasonic reactors: influence of probe diameter and amplitude
Authors:
Gianmaria Viciconte,
Varaha P. Sarvothaman,
Paolo Guida,
Tadd T. Truscott,
William L. Roberts
Abstract:
Ultrasound driven cavitation is widely used to intensify lab and industrial-scale processes. Various studies and experiments demonstrate that the acoustic energy, dissipated through the bubbles collapse, leads to intense physicochemical effects in the processed liquid. A better understanding of these phenomena is crucial for the optimization of ultrasonic reactors, and their scale-up. In the curre…
▽ More
Ultrasound driven cavitation is widely used to intensify lab and industrial-scale processes. Various studies and experiments demonstrate that the acoustic energy, dissipated through the bubbles collapse, leads to intense physicochemical effects in the processed liquid. A better understanding of these phenomena is crucial for the optimization of ultrasonic reactors, and their scale-up. In the current literature, the visual characterization of the reactor reactivity is mainly carried out with sonoluminescence and sonochemiluminescence. These techniques have limitations in the time resolution since a high camera exposure time is required. In this research, we proposed an alternative method, based on coumarin dosimetry to monitor the hydroxylation activity, and high-speed imaging for the visualization of the vapor field. By this approach, we aim to capture the structure and the dynamics of the vapor field and to correlate this with the chemical effects induced in the ultrasonic reactor. This characterization was carried out for four different ultrasonic probe diameters (3, 7, 14 and 40 mm), displacement amplitudes and processing volumes. Key findings indicate that the probe diameter strongly affects the structure of the vapor field and the chemical effectiveness of the system. The proposed methodology could be applied to characterize other types of ultrasonic reactors with different operating and processing conditions.
△ Less
Submitted 28 January, 2025;
originally announced January 2025.
-
Detection and analysis of synchronization routes in an axially forced globally unstable jet using recurrence quantification
Authors:
Abhijit K. Kushwaha,
Meenatchidevi Murugesan,
Nicholas A. Worth,
James R. Dawson,
Tadd T. Truscott,
Larry K. B. Li
Abstract:
Quasiperiodicity, a partially synchronous state that precedes the onset of forced synchronization in hydrodynamic systems, exhibits distinct geometrical patterns based on the specific route to lock-in. In this study, we explore these dynamic behaviors using recurrence quantification analysis. Focusing on a self-excited hydrodynamic system-a low-density jet subjected to external acoustic forcing at…
▽ More
Quasiperiodicity, a partially synchronous state that precedes the onset of forced synchronization in hydrodynamic systems, exhibits distinct geometrical patterns based on the specific route to lock-in. In this study, we explore these dynamic behaviors using recurrence quantification analysis. Focusing on a self-excited hydrodynamic system-a low-density jet subjected to external acoustic forcing at varying frequencies and amplitudes. We generate recurrence plots from unsteady velocity time traces. These recurrence plots provide insight into the synchronization dynamics and pathways of the jet under forced conditions. Further, we show that recurrence quantities are helpful to detect and distinguish between different routes to lock-in.
△ Less
Submitted 14 January, 2025;
originally announced January 2025.
-
Unraveling friction forces of droplets on a non-wetting surface
Authors:
Abhijit Kumar Kushwaha,
Sankara Arunachalam,
Ville Jokinen,
Dan Daniel,
Tadd T. Truscott
Abstract:
This paper explores the friction forces encountered by droplets on non-wetting surfaces, specifically focusing on superhydrophobic and superheated substrates. Employing a combination of experimental techniques, including inclined plane tests and cantilever force sensor measurements, we quantify friction forces across a broad range of velocities and surface types. Our results demonstrate that frict…
▽ More
This paper explores the friction forces encountered by droplets on non-wetting surfaces, specifically focusing on superhydrophobic and superheated substrates. Employing a combination of experimental techniques, including inclined plane tests and cantilever force sensor measurements, we quantify friction forces across a broad range of velocities and surface types. Our results demonstrate that friction forces vary significantly with changes in droplet velocity and surface characteristics, transitioning from contact line pinning to viscous dissipation in the bulk of the droplet. We propose a universal scaling law that accounts for contact angle hysteresis, viscous dissipation, and aerodynamic drag, providing a comprehensive framework for understanding droplet dynamics on non-wetting surfaces. These findings offer valuable insights for optimizing surface designs in fluid transport and microfluidic applications, paving the way for enhanced efficiency and innovation in these technologies.
△ Less
Submitted 30 May, 2024; v1 submitted 28 May, 2024;
originally announced May 2024.
-
The water entry surface seal behavior of spheres at intermediate speed regimes
Authors:
Akihito Kiyama,
Rafsan Rabbi,
Nathan Speirs,
Jesse Belden,
Yoshiyuki Tagawa,
Tadd T. Truscott
Abstract:
This research focuses on the water entry of spheres in the surface seal regime. Herein, surface seal occurs in the wake of a sphere impact with the water surface and is characterized by splash dome over and cavity pull-away between the \emph{low-speed} ($U<30$~m/s) and \emph{high-speed} ($U>165$~m/s) regimes for various sphere diameters $D$. The established empirical scaling laws for pinch-off tim…
▽ More
This research focuses on the water entry of spheres in the surface seal regime. Herein, surface seal occurs in the wake of a sphere impact with the water surface and is characterized by splash dome over and cavity pull-away between the \emph{low-speed} ($U<30$~m/s) and \emph{high-speed} ($U>165$~m/s) regimes for various sphere diameters $D$. The established empirical scaling laws for pinch-off time $t_p$ hold well for both low and high speeds (i.e., respectively $ t_pUD^{-1}~C_d^{-1/2}=const$ and $ t_pUD^{-1}~C_d^{-1/2}\propto Ca^{-1}$) but the transition deserves refinement. The intermediate regime in particular scales as $t_pUD^{-1}~C_d^{-1/2}\propto Ca^{-1/2}$, which means that the pressure reduction inside the cavity determines the surface seal dynamics as speeds increase. We also report on the transition from deep to surface seal, where the seal time is scaled more like a deep seal. The partial pull-away, ripples on the cavity surface, and the secondary pinch-off are also reported.
△ Less
Submitted 13 February, 2022;
originally announced February 2022.
-
Reducing water entry impact forces
Authors:
Nathan B. Speirs,
Jesse Belden,
Zhao Pan,
Sean Holekamp,
George Badlissi,
Matthew Jones,
Tadd T. Truscott
Abstract:
The forces on an object impacting the water are extreme in the early moments of water entry and can cause structural damage to biological and man-made bodies alike. These early-time forces arise primarily from added mass, peaking when the submergence is much less than one body length. We experimentally investigate a means of reducing impact forces on rigid spheres by making a jet of water strike t…
▽ More
The forces on an object impacting the water are extreme in the early moments of water entry and can cause structural damage to biological and man-made bodies alike. These early-time forces arise primarily from added mass, peaking when the submergence is much less than one body length. We experimentally investigate a means of reducing impact forces on rigid spheres by making a jet of water strike the quiescent water surface prior to the object impacting. The water jet accelerates the pool liquid and forms a cavity into which a sphere falls. Through on-board accelerometer measurements and high speed imaging, we quantify the force reduction compared to the case of a sphere entering a quiescent pool. Finally, we find the emergence of a critical jet volume required to maximize force reduction; the critical volume is rationalized using scaling arguments informed by near-surface particle image velocimetry (PIV) data.
△ Less
Submitted 29 June, 2018;
originally announced June 2018.
-
Drop on a Bent Fibre
Authors:
Zhao Pan,
Floriane Weyer,
Williams G. Pitt,
Nicolas Vandewalle,
Tadd T. Truscott
Abstract:
Inspired by the huge droplets attached on cypress tree leaf tips after rain, we find that a bent fibre can hold significantly more water in the corner than a horizontally placed fibre (typically up to three times or more). The maximum volume of the liquid that can be trapped is remarkably affected by the bending angle of the fibre and surface tension of the liquid. We experimentally find the optim…
▽ More
Inspired by the huge droplets attached on cypress tree leaf tips after rain, we find that a bent fibre can hold significantly more water in the corner than a horizontally placed fibre (typically up to three times or more). The maximum volume of the liquid that can be trapped is remarkably affected by the bending angle of the fibre and surface tension of the liquid. We experimentally find the optimal included angle ($\sim {36}{^\circ}$) that holds the most water. Analytical and semi-empirical models are developed to explain these counter-intuitive experimental observations and predict the optimal angle. The data and models could be useful for designing microfluidic and fog harvesting devices.
△ Less
Submitted 25 December, 2017;
originally announced December 2017.
-
Water entry of deformable spheres
Authors:
Randy C. Hurd,
Jesse Belden,
Michael A. Jandron,
D. Tate Fanning,
Allan F. Bower,
Tadd T. Truscott
Abstract:
When a rigid body collides with a liquid surface with sufficient velocity, it creates a splash curtain above the surface and entrains air behind the sphere, creating a cavity below the surface. While cavity dynamics have been studied for over a century, this work focuses on the water entry characteristics of deformable elastomeric spheres, which has not been studied. Upon free surface impact, elas…
▽ More
When a rigid body collides with a liquid surface with sufficient velocity, it creates a splash curtain above the surface and entrains air behind the sphere, creating a cavity below the surface. While cavity dynamics have been studied for over a century, this work focuses on the water entry characteristics of deformable elastomeric spheres, which has not been studied. Upon free surface impact, elastomeric sphere deform significantly, resulting in large-scale material oscillations within the sphere, resulting in unique nested cavities. We study these phenomena experimentally with high speed imaging and image processing techniques. The water entry behavior of deformable spheres differs from rigid spheres because of the pronounced deformation caused at impact as well as the subsequent material vibration. Our results show that this deformation and vibration can be predicted from material properties and impact conditions. Additionally, by accounting for the sphere deformation in an effective diameter term, we recover previously reported characteristics for time to cavity pinch-off and hydrodynamic force coefficients for rigid spheres. Our results also show that velocity change over the first oscillation period scales with a dimensionless ratio of material shear modulus to impact hydrodynamic pressure. Therefore we are able to describe the water entry characteristics of deformable spheres in terms of material properties and impact conditions.
△ Less
Submitted 5 April, 2017;
originally announced April 2017.
-
Catastrophic Cracking Courtesy of Quiescent Cavitation
Authors:
D. Jesse Daily,
Ken R. Langley,
Scott L. Thomson,
Tadd T. Truscott
Abstract:
A popular party trick is to fill a glass bottle with water and hit the top of the bottle with an open hand, causing the bottom of the bottle to break open. We investigate the source of the catastrophic cracking through the use of high-speed video and an accelerometer. Upon closer inspection, it is obvious that the acceleration caused by hitting the top of the bottle is followed by the formation of…
▽ More
A popular party trick is to fill a glass bottle with water and hit the top of the bottle with an open hand, causing the bottom of the bottle to break open. We investigate the source of the catastrophic cracking through the use of high-speed video and an accelerometer. Upon closer inspection, it is obvious that the acceleration caused by hitting the top of the bottle is followed by the formation of bubbles near the bottom. The nearly instantaneous acceleration creates an area of low pressure on the bottom of the bottle where cavitation bubbles form. Moments later, the cavitation bubbles collapse at roughly 10 times the speed of formation, causing the bottle to break. The accelerometer data shows that the bottle is broken after the bubbles collapse and that the magnitude of the bubble collapse is greater than the initial impact. This fluid dynamics video highlights that this trick will not work if the bottle is empty nor if it is filled with a carbonated fluid because the vapor bubbles fill with the CO2 dissolved in the liquid, preventing the bubbles from collapsing. A modified cavitation number, including the acceleration of the fluid (a), vapor pressure (Pv), and depth of the fluid column (h), is derived to determine when cavity inception occurs. Through experimentation, visible cavitation bubbles form when the cavitation number is less than 0.5. The experiments, based on the modified cavitation number, reveal that the easiest way to break a glass bottle with your bare hands is to fill it with a non-carbonated, high vapor pressure fluid, and strike it hard.
△ Less
Submitted 14 October, 2013; v1 submitted 14 October, 2012;
originally announced October 2012.
-
Quantitative Flow Field Imaging about a Hydrophobic Sphere Impacting on a Free Surface
Authors:
Roderick R. La Foy,
Tadd T. Truscott,
Alexandra H. Techet
Abstract:
This fluid dynamics video shows the impact of a hydrophobic sphere impacting a water surface. The sphere has a mass ratio of m* = 1.15, a wetting angle of 110 degrees, a diameter of 9.5 mm, and impacts the surface with a Froude number of Fr = 9.2. The first sequence shows an impact of a sphere on the free surface illustrating the formation of the splash crown and air cavity. The cavity grows bot…
▽ More
This fluid dynamics video shows the impact of a hydrophobic sphere impacting a water surface. The sphere has a mass ratio of m* = 1.15, a wetting angle of 110 degrees, a diameter of 9.5 mm, and impacts the surface with a Froude number of Fr = 9.2. The first sequence shows an impact of a sphere on the free surface illustrating the formation of the splash crown and air cavity. The cavity grows both in the axial and radial direction until it eventually collapses at a point roughly half of the distance from the free surface to the sphere, which is known as the pinch-off point. The second set of videos shows a sphere impacting the free surface under the same conditions using Particle Image Velocimetry (PIV) to quantify the flow field. A laser sheet illuminates the mid-plane of the sphere, and the fluid is seeded with particles whose motion is captured by a high-speed video camera. Velocity fields are then calculated from the images. The video sequences from left to right depict the radial velocity, the axial velocity, and the vorticity respectively in the flow field. The color bar on the far left indicates the magnitude of the velocity and vorticity. All videos were taken at 2610 fps and the PIV data was processed using a 16 x 16 window with a 50% overlap.
△ Less
Submitted 15 October, 2008; v1 submitted 10 October, 2008;
originally announced October 2008.
-
Dynamics of Water Entry
Authors:
Tadd T. Truscott,
Jeffrey M. Aristoff,
Alexandra H. Techet
Abstract:
The hydrodynamics associated with water-entry of spheres can be highly variable with respect to the material and kinematic properties of the sphere. This series of five fluid dynamics videos illustrates several subtle but interesting variations. The first series of videos contrasts the nature of impact between a hydrophilic and hydrophobic sphere, and illustrates how surface coating can affect w…
▽ More
The hydrodynamics associated with water-entry of spheres can be highly variable with respect to the material and kinematic properties of the sphere. This series of five fluid dynamics videos illustrates several subtle but interesting variations. The first series of videos contrasts the nature of impact between a hydrophilic and hydrophobic sphere, and illustrates how surface coating can affect whether or not an air cavity is formed. The second video series illustrates how spin and surface treatments can alter the splash and cavity formation following water entry. The spinning sphere causes a wedge of fluid to be drawn into the cavity due to the no-slip condition and follows a curved trajectory. The non-spinning sphere has two distinct surface treatments on the left and right hemispheres: the left hemisphere is hydrophobic and the right hemisphere is hydrophilic . Interestingly, the cavity formation for the half-and-half sphere has many similarities to that of the spinning sphere especially when viewed from above. The third video series compares two millimetric nylon spheres impacting at slightly different impact speeds (Uo = 40 and 45 cm/s); the faster sphere fully penetrates the free surface, forming a cavity, whereas the slower sphere does not. The fourth series shows the instability of an elongated water-entry cavity formed by a millimetric steel sphere with a hydrophobic coating impacting at Uo = 600 cm/s. The elongated cavity forms multiple pinch-off points along its decent. Finally, a millimetric steel sphere with a hydrophobic coating breaks the free surface with an impact speed of Uo = 350 cm/s. The cavity pinches-off below the surface, generating a Worthington jet that pinches into droplets owing to the Rayleigh-Plateau instability.
△ Less
Submitted 15 October, 2008; v1 submitted 10 October, 2008;
originally announced October 2008.
