Showing 1–4 of 4 results for author: Tournefier, E

Calibration and performance of the LHCb calorimeters in Run 1 and 2 at the LHC

Authors: C. Abellán Beteta, A. Alfonso Albero, Y. Amhis, S. Barsuk, C. Beigbeder-Beau, I. Belyaev, R. Bonnefoy, D. Breton, O. Callot, M. Calvo Gomez, A. Camboni, H. Chanal, D. Charlet, M. Chefdeville, V. Coco, E. Cogneras, A. Comerma-Montells, S. Coquereau, O. Deschamps, F. Domingo Bonal, C. Drancourt, O. Duarte, N. Dumont Dayot, R. Dzhelyadin, V. Egorychev , et al. (62 additional authors not shown)

Abstract: The calibration and performance of the LHCb Calorimeter system in Run 1 and 2 at the LHC are described. After a brief description of the sub-detectors and of their role in the trigger, the calibration methods used for each part of the system are reviewed. The changes which occurred with the increase of beam energy in Run 2 are explained. The performances of the calorimetry for $γ$ and $π^0$ are de… ▽ More The calibration and performance of the LHCb Calorimeter system in Run 1 and 2 at the LHC are described. After a brief description of the sub-detectors and of their role in the trigger, the calibration methods used for each part of the system are reviewed. The changes which occurred with the increase of beam energy in Run 2 are explained. The performances of the calorimetry for $γ$ and $π^0$ are detailed. A few results from collisions recorded at $\sqrt {s}$ = 7, 8 and 13 TeV are shown. △ Less

Submitted 26 August, 2020; originally announced August 2020.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2020-001.html (LHCb public pages)

Report number: CERN-LHCb-DP-2020-001

Calibration and sensitivity of the Virgo detector during its second science run

Authors: The Virgo Collaboration, T. Accadia, F. Acernese, F. Antonucci, P. Astone, G. Ballardin, F. Barone, M. Barsuglia, A. Basti, Th. S. Bauer, M. G. Beker, A. Belletoile, S. Birindelli, M. Bitossi, M. A. Bizouard, M. Blom, F. Bondu, L. Bonelli, R. Bonnand, V. Boschi, L. Bosi, B. Bouhou, S. Braccini, C. Bradaschia, A. Brillet , et al. (153 additional authors not shown)

Abstract: The Virgo detector is a kilometer-length interferometer for gravitational wave detection located near Pisa (Italy). During its second science run (VSR2) in 2009, six months of data were accumulated with a sensitivity close to its design. In this paper, the methods used to determine the parameters for sensitivity estimation and gravitational wave reconstruction are described. The main quantities to… ▽ More The Virgo detector is a kilometer-length interferometer for gravitational wave detection located near Pisa (Italy). During its second science run (VSR2) in 2009, six months of data were accumulated with a sensitivity close to its design. In this paper, the methods used to determine the parameters for sensitivity estimation and gravitational wave reconstruction are described. The main quantities to be calibrated are the frequency response of the mirror actuation and the sensing of the output power. Focus is also put on their absolute timing. The monitoring of the calibration data as well as the parameter estimation with independent techniques are discussed to provide an estimation of the calibration uncertainties. Finally, the estimation of the Virgo sensitivity in the frequency-domain is described and typical sensitivities measured during VSR2 are shown. △ Less

Submitted 18 January, 2011; v1 submitted 27 September, 2010; originally announced September 2010.

Comments: 30 pages, 23 figures, 1 table. Published in Classical and Quantum Gravity (CQG), Corrigendum included

Journal ref: Class.Quant.Grav.28:025005,2011; Erratum-ibid.28:079501,2011

Experimental study of a liquid Xenon PET prototype module

Authors: M. -L. Gallin-Martel, P. Martin, F. Mayet, J. Ballon, G. Barbier, C. Barnoux, J. Berger, D. Bondoux, O. Bourrion, J. Collot, D. Dzahini, R. Foglio, L. Gallin-Martel, A. Garrigue, S. Jan, P. Petit, P. Stassi, F. Vezzu, E. Tournefier

Abstract: A detector using liquid Xenon in the scintillation mode is studied for Positron Emission Tomography (PET). The specific design aims at taking full advantage of the liquid Xenon properties. It does feature a promising insensitive to any parallax effect. This work reports on the performances of the first LXe prototype module, equipped with a position sensitive PMT operating in the VUV range (178 n… ▽ More A detector using liquid Xenon in the scintillation mode is studied for Positron Emission Tomography (PET). The specific design aims at taking full advantage of the liquid Xenon properties. It does feature a promising insensitive to any parallax effect. This work reports on the performances of the first LXe prototype module, equipped with a position sensitive PMT operating in the VUV range (178 nm). △ Less

Submitted 23 November, 2005; v1 submitted 7 November, 2005; originally announced November 2005.

Comments: Proc. of the 7th International Workshops on Radiation Imaging Detectors (IWORID-7), Grenoble, France 4-7 July 2005

Journal ref: Nucl.Instrum.Meth.A563:225-228,2006

GePEToS : A Geant4 Monte Carlo simulation package for Positron Emission Tomography

Authors: S. Jan, J. Collot, M. -L. Gallin-Martel, P. Martin, F. Mayet, E. Tournefier

Abstract: GePEToS is a simulation framework developed over the last few years for assessing the instrumental performance of future PET scanners. It is based on Geant4, written in Object-Oriented C++ and runs on Linux platforms. The validity of GePEToS has been tested on the well-known Siemens ECAT EXACT HR+ camera. The results of two application examples are presented : the design optimization of a liquid… ▽ More GePEToS is a simulation framework developed over the last few years for assessing the instrumental performance of future PET scanners. It is based on Geant4, written in Object-Oriented C++ and runs on Linux platforms. The validity of GePEToS has been tested on the well-known Siemens ECAT EXACT HR+ camera. The results of two application examples are presented : the design optimization of a liquid Xe micro-PET camera dedicated to small animal imaging as well as the evaluation of the effect of a strong axial magnetic field on the image resolution of a Concorde P4 micro-PET camera. △ Less

Submitted 3 December, 2003; originally announced December 2003.

Comments: 5 pages, 12 figures, submitted to IEEE Transactions on Nuclear Science

Journal ref: IEEE Trans.Nucl.Sci. 52 (2005) 102