Showing 1–10 of 10 results for author: Tong, J K

Drift Orbit Bifurcations and Cross-field Transport in the Outer Radiation Belt: Global MHD and Integrated Test-Particle Simulations

Authors: R. T. Desai, J. P. Eastwood, R. B. Horne, H. J. Allison, O. Allanson. E. J. Watt, J. W. B. Eggington, S. A. Glauert, N. P. Meredith, M. O. Archer, F. A. Staples, L. Mejnertsen, J. K. Tong, J. P. Chittenden

Abstract: Energetic particle fluxes in the outer magnetosphere present a significant challenge to modelling efforts as they can vary by orders of magnitude in response to solar wind driving conditions. In this article, we demonstrate the ability to propagate test particles through global MHD simulations to a high level of precision and use this to map the cross-field radial transport associated with relativ… ▽ More Energetic particle fluxes in the outer magnetosphere present a significant challenge to modelling efforts as they can vary by orders of magnitude in response to solar wind driving conditions. In this article, we demonstrate the ability to propagate test particles through global MHD simulations to a high level of precision and use this to map the cross-field radial transport associated with relativistic electrons undergoing drift orbit bifurcations (DOBs). The simulations predict DOBs primarily occur within an Earth radius of the magnetopause loss cone and appears significantly different for southward and northward interplanetary magnetic field orientations. The changes to the second invariant are shown to manifest as a dropout in particle fluxes with pitch angles close to 90$^\circ$ and indicate DOBs are a cause of butterfly pitch angle distributions within the night-time sector. The convective electric field, not included in previous DOB studies, is found to have a significant effect on the resultant long term transport, and losses to the magnetopause and atmosphere are identified as a potential method for incorporating DOBs within Fokker-Planck transport models. △ Less

Submitted 4 September, 2021; originally announced September 2021.

Comments: 12 pages, 8 figures. Accepted for publication as a Journal of Geophysical Research article on 04 September 2021

Burn regimes in the hydrodynamic scaling of perturbed inertial confinement fusion hotspots

Authors: J. K. Tong, K. McGlinchey, B. D. Appelbe, C. A. Walsh, A. J. Crilly, J. P. Chittenden

Abstract: We present simulations of ignition and burn based on the Highfoot and High-Density Carbon indirect drive designs of the National Ignition Facility for three regimes of alpha-heating - self-heating, robust ignition and propagating burn - exploring hotspot power balance, perturbations and hydrodynamic scaling. A Monte-Carlo Particle-in-Cell charged particle transport package for the radiation-magnet… ▽ More We present simulations of ignition and burn based on the Highfoot and High-Density Carbon indirect drive designs of the National Ignition Facility for three regimes of alpha-heating - self-heating, robust ignition and propagating burn - exploring hotspot power balance, perturbations and hydrodynamic scaling. A Monte-Carlo Particle-in-Cell charged particle transport package for the radiation-magnetohydrodynamics code Chimera was developed for this work. Hotspot power balance between alpha-heating, electron thermal conduction and radiation was studied in 1D for each regime, and the impact of perturbations on this power balance explored in 3D using a single Rayleigh-Taylor spike. Heat flow into the spike from thermal conduction and alpha-heating increases by $\sim2-3\times$, due to sharper temperature gradients and increased proximity of the cold, dense material to the main fusion regions respectively. The radiative contribution remains largely unaffected in magnitude. Hydrodynamic scaling with capsule size and laser energy of two perturbation scenarios (a short-wavelength multi-mode & a low-mode radiation asymmetry) is explored in 3D, demonstrating the differing hydrodynamic evolution of the three alpha-heating regimes. The multi-mode yield increases faster with scale factor due to more synchronous $PdV$ compression producing higher temperatures and densities, and hence stronger bootstrapping. Effects on the hydrodynamic evolution are clearer for stronger alpha-heating regimes and include: reduced perturbation growth due to ablation from fire-polishing and stronger thermal conduction; sharper temperature and density gradients; and increased hotspot pressures which further compress the shell, increase hotspot size and induce faster re-expansion. Faster expansion into regions of weak confinement is more prominent for stronger alpha-heating regimes, and can result in loss of confinement. △ Less

Submitted 15 February, 2019; originally announced February 2019.

Comments: 21 pages, 17 figures, submitted to Nucl. Fusion

Losses in plasmonics: from mitigating energy dissipation to embracing loss-enabled functionalities

Authors: Svetlana V. Boriskina, Thomas Alan Cooper, Lingping Zeng, George Ni, Jonathan K. Tong, Yoichiro Tsurimaki, Yi Huang, Laureen Meroueh, Gerald Mahan, Gang Chen

Abstract: Unlike conventional optics, plasmonics enables unrivalled concentration of optical energy well beyond the diffraction limit of light. However, a significant part of this energy is dissipated as heat. Plasmonic losses present a major hurdle in the development of plasmonic devices and circuits that can compete with other mature technologies. Until recently, they have largely kept the use of plasmoni… ▽ More Unlike conventional optics, plasmonics enables unrivalled concentration of optical energy well beyond the diffraction limit of light. However, a significant part of this energy is dissipated as heat. Plasmonic losses present a major hurdle in the development of plasmonic devices and circuits that can compete with other mature technologies. Until recently, they have largely kept the use of plasmonics to a few niche areas where loss is not a key factor, such as surface enhanced Raman scattering and biochemical sensing. Here, we discuss the origin of plasmonic losses and various approaches to either minimize or mitigate them based on understanding of fundamental processes underlying surface plasmon modes excitation and decay. Along with the ongoing effort to find and synthesize better plasmonic materials, optical designs that modify the optical powerflow through plasmonic nanostructures can help in reducing both radiative damping and dissipative losses of surface plasmons. Another strategy relies on the development of hybrid photonic-plasmonic devices by coupling plasmonic nanostructures to resonant optical elements. Hybrid integration not only helps to reduce dissipative losses and radiative damping of surface plasmons, but also makes possible passive radiative cooling of nano-devices. Finally, we review emerging applications of thermoplasmonics that leverage Ohmic losses to achieve new enhanced functionalities. The most successful commercialized example of a loss-enabled novel application of plasmonics is heat-assisted magnetic recording. Other promising technological directions include thermal emission manipulation, cancer therapy, nanofabrication, nano-manipulation, plasmon-enabled material spectroscopy and thermo-catalysis, and solar water treatment. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Comments: 43 pages, 18 figures

Journal ref: Advances in Optics and Photonics, Vol. 9, Issue 4, pp. 775-827 (2017)

Topological engineering of interfacial optical Tamm states for highly-sensitive near-singular-phase optical detection

Authors: Yoichiro Tsurimaki, Jonathan K. Tong, Victor N. Boriskin, Alexander Semenov, Mykola I. Ayzatsky, Yuri P. Machekhin, Gang Chen, Svetlana V. Boriskina

Abstract: We developed planar multilayered photonic-plasmonic structures, which support topologically protected optical states on the interface between metal and dielectric materials, known as optical Tamm states. Coupling of incident light to the Tamm states can result in perfect absorption within one of several narrow frequency bands, which is accompanied by a singular behavior of the phase of electromagn… ▽ More We developed planar multilayered photonic-plasmonic structures, which support topologically protected optical states on the interface between metal and dielectric materials, known as optical Tamm states. Coupling of incident light to the Tamm states can result in perfect absorption within one of several narrow frequency bands, which is accompanied by a singular behavior of the phase of electromagnetic field. In the case of near-perfect absorptance, very fast local variation of the phase can still be engineered. In this work, we theoretically and experimentally demonstrate how these drastic phase changes can improve sensitivity of optical sensors. A planar Tamm absorber was fabricated and used to demonstrate remote near-singular-phase temperature sensing with an over an order of magnitude improvement in sensor sensitivity and over two orders of magnitude improvement in the figure of merit over the standard approach of measuring shifts of resonant features in the reflectance spectra of the same absorber. Our experimentally demonstrated phase-to-amplitude detection sensitivity improvement nearly doubles that of state-of-the-art nano-patterned plasmonic singular-phase detectors, with further improvements possible via more precise fabrication. Tamm perfect absorbers form the basis for robust planar sensing platforms with tunable spectral characteristics, which do not rely on low-throughput nano-patterning techniques. △ Less

Submitted 10 January, 2018; originally announced January 2018.

Comments: 31 pages; 6 main text figures and 10 supplementary figures

Journal ref: ACS Photonics, 2018

Hybrid optical-thermal antennas for enhanced light focusing and local temperature control

Authors: Svetlana V. Boriskina, Lee A. Weinstein, Jonathan K. Tong, Wei-Chun Hsu, Gang Chen

Abstract: Metal nanoantennas supporting localized surface plasmon resonances have become an indispensable tool in bio(chemical) sensing and nanoscale imaging applications. The high plasmon-enhanced electric field intensity in the visible or near-IR range that enables the above applications may also cause local heating of nanoantennas. We present a design of hybrid optical-thermal antennas that simultaneousl… ▽ More Metal nanoantennas supporting localized surface plasmon resonances have become an indispensable tool in bio(chemical) sensing and nanoscale imaging applications. The high plasmon-enhanced electric field intensity in the visible or near-IR range that enables the above applications may also cause local heating of nanoantennas. We present a design of hybrid optical-thermal antennas that simultaneously enable intensity enhancement at the operating wavelength in the visible and nanoscale local temperature control. We demonstrate a possibility to reduce the hybrid antenna operating temperature via enhanced infrared thermal emission. We predict via rigorous numerical modeling that hybrid optical-thermal antennas that support high-quality-factor photonic-plasmonic modes enable up to two orders of magnitude enhancement of localized electric fields and of the optical power absorbed in the nanoscale metal volume. At the same time, the hybrid antenna temperature can be lowered by several hundred degrees with respect to its all-metal counterpart under continuous irradiance of 104-105 W/m2. The temperature reduction effect is attributed to the enhanced radiative cooling, which is mediated by the thermally-excited localized surface phonon polariton modes. We further show that temperature reduction under even higher irradiances can be achieved by a combination of enhanced radiative and convective cooling in hybrid antennas. Finally, we demonstrate how hybrid optical-thermal antennas can be used to achieve strong localized heating of nanoparticles while keeping the rest of the optical chip at low temperature. △ Less

Submitted 11 August, 2016; originally announced August 2016.

Comments: 24 pages, 11 figures

Journal ref: ACS Photonics, 2016

Enhancement and tunability of near-field radiative heat transfer mediated by surface plasmon polaritons in thin plasmonic films

Authors: Svetlana V. Boriskina, Jonathan K. Tong, Yi Huang, Jiawei Zhou, Vazrik Chiloyan, Gang Chen

Abstract: The properties of thermal radiation exchange between hot and cold objects can be strongly modified if they interact in the near field where electromagnetic coupling occurs across gaps narrower than the dominant wavelength of thermal radiation. Using a rigorous fluctuational electrodynamics approach, we predict that ultra-thin films of plasmonic materials can be used to dramatically enhance near-fi… ▽ More The properties of thermal radiation exchange between hot and cold objects can be strongly modified if they interact in the near field where electromagnetic coupling occurs across gaps narrower than the dominant wavelength of thermal radiation. Using a rigorous fluctuational electrodynamics approach, we predict that ultra-thin films of plasmonic materials can be used to dramatically enhance near-field heat transfer. The total spectrally integrated film-to-film heat transfer is over an order of magnitude larger than between the same materials in bulk form and also exceeds the levels achievable with polar dielectrics such as SiC. We attribute this enhancement to the significant spectral broadening of radiative heat transfer due to coupling between surface plasmon polaritons (SPPs) on both sides of each thin film. We show that the radiative heat flux spectrum can be further shaped by the choice of the substrate onto which the thin film is deposited. In particular, substrates supporting surface phonon polaritons (SPhP) strongly modify the heat flux spectrum owing to the interactions between SPPs on thin films and SPhPs of the substrate. The use of thin film phase change materials on polar dielectric substrates allows for dynamic switching of the heat flux spectrum between SPP-mediated and SPhP-mediated peaks. △ Less

Submitted 27 April, 2016; originally announced April 2016.

Comments: 25 pages, 11 figures

Journal ref: Photonics 2(2):659-683, June 2015

Heat meets light on the nanoscale

Authors: Svetlana V. Boriskina, Jonathan K. Tong, Wei-Chun Hsu, Bolin Liao, Yi Huang, Vazrik Chiloyan, Gang Chen

Abstract: We discuss the state-of-the-art and remaining challenges in the fundamental understanding and technology development for controlling light-matter interactions in nanophotonic environments in and away from thermal equilibrium. The topics covered range from the basics of the thermodynamics of light emission and absorption, to applications in solar-thermal energy generation, thermophotovoltaics, opti… ▽ More We discuss the state-of-the-art and remaining challenges in the fundamental understanding and technology development for controlling light-matter interactions in nanophotonic environments in and away from thermal equilibrium. The topics covered range from the basics of the thermodynamics of light emission and absorption, to applications in solar-thermal energy generation, thermophotovoltaics, optical refrigeration, personalized cooling technologies, development of coherent incandescent light sources, and spinoptics. △ Less

Submitted 27 April, 2016; originally announced April 2016.

Comments: 46 pages, 11 figures; to appear in the special issue of Nanophotonics on 'Smart nanophotonics for renewable energy and sustainability' 2016

Hybrid optical-thermal devices and materials for light manipulation and radiative cooling

Authors: Svetlana V. Boriskina, Jonathan K. Tong, Wei-Chun Hsu, Lee Weinstein, Xiaopeng Huang, James Loomis, Yanfei Xu, Gang Chen

Abstract: We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna… ▽ More We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna with sub-wavelength light focusing, which simultaneously enables intensity enhancement at the operating wavelength in the visible and reduction of the operating temperature. The enhancement is achieved via light recycling in the form of whispering-gallery modes trapped in an optical microcavity, while cooling functionality is realized via a combination of reduced optical absorption and radiative cooling. The other example is a fabric that is opaque in the visible range yet highly transparent in the infrared, which allows the human body to efficiently shed energy in the form of thermal emission. Such fabrics can find numerous applications for personal thermal management and for buildings energy efficiency improvement. △ Less

Submitted 8 September, 2015; originally announced September 2015.

Comments: Proc. SPIE 9546, Active Photonic Materials VII, 95461U (September 1, 2015) 7 pages, 4 figures

Infrared-Transparent Visible-Opaque Fabrics for Wearable Personal Thermal Management

Authors: Jonathan K. Tong, Xiaopeng Huang, Svetlana V. Boriskina, James Loomis, Yanfei Xu, Gang Chen

Abstract: Personal cooling technologies locally control the temperature of an individual rather than a large space, thus providing personal thermal comfort while supplementing cooling loads in thermally regulated environments. This can lead to significant energy and cost savings. In this study, a new approach to personal cooling was developed using an infrared-transparent visible-opaque fabric (ITVOF), whic… ▽ More Personal cooling technologies locally control the temperature of an individual rather than a large space, thus providing personal thermal comfort while supplementing cooling loads in thermally regulated environments. This can lead to significant energy and cost savings. In this study, a new approach to personal cooling was developed using an infrared-transparent visible-opaque fabric (ITVOF), which provides passive cooling via the transmission of thermal radiation emitted by the human body directly to the environment. Here, we present a conceptual framework to thermally and optically design an ITVOF. Using a heat transfer model, the fabric was found to require a minimum infrared (IR) transmittance of 0.644 and a maximum IR reflectance of 0.2 to ensure thermal comfort at ambient temperatures as high as 26.1oC (79oF). To meet these requirements, an ITVOF design was developed using synthetic polymer fibers with an intrinsically low IR absorptance. These fibers were then structured to minimize IR reflection via weak Rayleigh scattering while maintaining visible opaqueness via strong Mie scattering. For a fabric composed of parallel-aligned polyethylene fibers, numerical finite element simulations predict 1 μm diameter fibers bundled into 30 μm yarns can achieve a total hemispherical IR transmittance of 0.972, which is nearly perfectly transparent to mid- and far-IR radiation. The visible wavelength properties of the ITVOF are comparable to conventional textiles ensuring opaqueness to the human eye. By providing personal cooling in a form amenable to everyday use, ITVOF-based clothing offers a simple, low-cost solution to reduce energy consumption in HVAC systems. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Comments: 21 page; 8 figures

Journal ref: ASC Photonics, vol. 2, no. 6, pp. 769-778, 2015

Thin-film 'Thermal Well' Emitters and Absorbers for High-Efficiency Thermophotovoltaics

Authors: Jonathan K. Tong, Wei-Chun Hsu, Yi Huang, Svetlana V. Boriskina, Gang Chen

Abstract: A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems by using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell, strong spectral selectivity in both thermal emission and absorption can be achieved by confining photons in trapped waveguide modes inside the thin-films that a… ▽ More A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems by using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell, strong spectral selectivity in both thermal emission and absorption can be achieved by confining photons in trapped waveguide modes inside the thin-films that act as thermal analogs to quantum wells. Simultaneously, photo-excited carriers travel shorter distances across the thin-films reducing bulk recombination losses resulting in a lower saturation current in the PV cell. We predict a TPV efficiency enhancement with near-field coupling between the thermal emitter and the PV cell of up to 38.7% using a germanium (Ge) emitter at 1000 K and a gallium antimonide (GaSb) cell with optimized thicknesses separated by 100 nm. Even in the far-field limit, the efficiency is predicted to reach 31.5%, which is an order of magnitude higher than the Shockley Queisser limit of 1.6% for a bulk GaSb cell and a blackbody emitter at 1000 K. The proposed design approach does not require nanoscale patterning of the emitter and PV cell surfaces, but instead offers a simple low-cost solution to improve the performance of a thermophotovoltaic system. △ Less

Submitted 6 February, 2015; originally announced February 2015.

Comments: Manuscript and supplementary information