-
Deep learning-enhanced chemiluminescence vertical flow assay for high-sensitivity cardiac troponin I testing
Authors:
Gyeo-Re Han,
Artem Goncharov,
Merve Eryilmaz,
Shun Ye,
Hyou-Arm Joung,
Rajesh Ghosh,
Emily Ngo,
Aoi Tomoeda,
Yena Lee,
Kevin Ngo,
Elizabeth Melton,
Omai B. Garner,
Dino Di Carlo,
Aydogan Ozcan
Abstract:
Democratizing biomarker testing at the point-of-care requires innovations that match laboratory-grade sensitivity and precision in an accessible format. Here, we demonstrate high-sensitivity detection of cardiac troponin I (cTnI) through innovations in chemiluminescence-based sensing, imaging, and deep learning-driven analysis. This chemiluminescence vertical flow assay (CL-VFA) enables rapid, low…
▽ More
Democratizing biomarker testing at the point-of-care requires innovations that match laboratory-grade sensitivity and precision in an accessible format. Here, we demonstrate high-sensitivity detection of cardiac troponin I (cTnI) through innovations in chemiluminescence-based sensing, imaging, and deep learning-driven analysis. This chemiluminescence vertical flow assay (CL-VFA) enables rapid, low-cost, and precise quantification of cTnI, a key cardiac protein for assessing heart muscle damage and myocardial infarction. The CL-VFA integrates a user-friendly chemiluminescent paper-based sensor, a polymerized enzyme-based conjugate, a portable high-performance CL reader, and a neural network-based cTnI concentration inference algorithm. The CL-VFA measures cTnI over a broad dynamic range covering six orders of magnitude and operates with 50 uL of serum per test, delivering results in 25 min. This system achieves a detection limit of 0.16 pg/mL with an average coefficient of variation under 15%, surpassing traditional benchtop analyzers in sensitivity by an order of magnitude. In blinded validation, the computational CL-VFA accurately measured cTnI concentrations in patient samples, demonstrating a robust correlation against a clinical-grade FDA-cleared analyzer. These results highlight the potential of CL-VFA as a robust diagnostic tool for accessible, rapid cardiac biomarker testing that meets the needs of diverse healthcare settings, from emergency care to underserved regions.
△ Less
Submitted 12 December, 2024;
originally announced December 2024.
-
Comparison of gap-based and flow-based control strategies using a new controlled stochastic cellular automaton model for traffic flow
Authors:
Kayo Kinjo,
Akiyasu Tomoeda
Abstract:
Autonomous vehicles are essential to future transportation systems, potentially reducing traffic congestion. This study examines the impact of different vehicle control strategies on traffic flow through simulations. We propose a novel stochastic cellular automaton model, the controlled stochastic optimal velocity (CSOV) model, which incorporates vehicle control effects. Within the CSOV model, two…
▽ More
Autonomous vehicles are essential to future transportation systems, potentially reducing traffic congestion. This study examines the impact of different vehicle control strategies on traffic flow through simulations. We propose a novel stochastic cellular automaton model, the controlled stochastic optimal velocity (CSOV) model, which incorporates vehicle control effects. Within the CSOV model, two control strategies are implemented: gap-based control (GC), which adjusts vehicle velocity to balance the gaps between adjacent vehicles, and flow-based control (FC), which aims to maintain a consistent local flow between the front and rear vehicles. Results show that both control strategies improve traffic flow. However, under weaker control, the GC sometimes resulted in lower flow compared to no control. In contrast, the FC consistently enhanced flow across control strengths, yielding more robust outcomes. Furthermore, when both strategies achieved comparable flow rates, the FC provided a more stable velocity distribution under varying traffic densities than the GC.
△ Less
Submitted 13 November, 2024; v1 submitted 28 August, 2023;
originally announced August 2023.
-
Excluded Volume Effect in Queueing Theory
Authors:
Daichi Yanagisawa,
Akiyasu Tomoeda,
Rui Jiang,
Katsuhiro Nishinari
Abstract:
We have introduced excluded volume effect, which is an important factor to model a realistic pedestrian queue, into queueing theory. The probability distributions of pedestrian number and pedestrian waiting time in a queue have been calculated exactly. Due to time needed to close up the queue, the mean number of pedestrians increases as pedestrian arrival probability ($λ$) and leaving probabilit…
▽ More
We have introduced excluded volume effect, which is an important factor to model a realistic pedestrian queue, into queueing theory. The probability distributions of pedestrian number and pedestrian waiting time in a queue have been calculated exactly. Due to time needed to close up the queue, the mean number of pedestrians increases as pedestrian arrival probability ($λ$) and leaving probability ($μ$) increase even if the ratio between them (i.e., $ρ=λ/μ$) remains constant. Furthermore, at a given $ρ$, the mean waiting time does not increase monotonically with the service time (which is inverse to $μ$), a minimum could be reached instead.
△ Less
Submitted 22 January, 2010;
originally announced January 2010.
-
Introduction of Frictional and Turning Function for Pedestrian Outflow with an Obstacle
Authors:
Daichi Yanagisawa,
Ayako Kimura,
Akiyasu Tomoeda,
Ryosuke Nishi,
Yushi Suma,
Kazumichi Ohtsuka,
Katsuhiro Nishinari
Abstract:
In this paper, two important factors which affect the pedestrian outflow at a bottleneck significantly are studied in detail to analyze the effect of an obstacle set up in front of an exit. One is a conflict at an exit when pedestrians evacuate from a room. We use floor field model for simulating such behavior, which is a well-studied pedestrian model using cellular automata. The conflicts have…
▽ More
In this paper, two important factors which affect the pedestrian outflow at a bottleneck significantly are studied in detail to analyze the effect of an obstacle set up in front of an exit. One is a conflict at an exit when pedestrians evacuate from a room. We use floor field model for simulating such behavior, which is a well-studied pedestrian model using cellular automata. The conflicts have been taken into account by the friction parameter. However, the friction parameter so far is a constant and does not depend on the number of the pedestrians conflicting at the same time. Thus, we have improved the friction parameter by the frictional function, which is a function of the number of the pedestrians involved in the conflict. Second, we have newly introduced the cost of turning of pedestrians at the exit. Since pedestrians have inertia, their walking speeds decrease when they turn, and the pedestrian outflow decreases.
The validity of the extended model, which includes the frictional function and the turning function, is verified by both a mean field theory and experiments. In our experiments, the pedestrian flow increases when we put an obstacle in front of an exit. The analytical results clearly explains the mechanism of the effect of the obstacle, i.e., the obstacle blocks pedestrians moving to the exit and decreases the average number of pedestrians involved in the conflict. We have also found that an obstacle works more effectively when we shift it from the center since pedestrians go through the exit with less turning.
△ Less
Submitted 1 June, 2009;
originally announced June 2009.
-
Achievement of Alternative Configurations of Vehicles on Multiple Lanes
Authors:
Ryosuke Nishi,
Hiroshi Miki,
Akiyasu Tomoeda,
Katsuhiro Nishinari
Abstract:
Heavy traffic congestion daily occurs at merging sections on highway. For releasing this congestion, possibility of alternative configuration of vehicles on multiple-lane road is discussed in this paper. This is the configuration where no vehicles move aside on the other lane. It has a merit in making smooth merging at an intersection or a junction due to so-called the "zipper effect". We show,…
▽ More
Heavy traffic congestion daily occurs at merging sections on highway. For releasing this congestion, possibility of alternative configuration of vehicles on multiple-lane road is discussed in this paper. This is the configuration where no vehicles move aside on the other lane. It has a merit in making smooth merging at an intersection or a junction due to so-called the "zipper effect". We show, by developing a cellular automaton model for multiple lanes, that this configuration is achieved by simple local interactions between vehicles neighboring each other. The degree of the alternative configuration in terms of the spatial increase of parallel driving length is studied by using both numerical simulations and mean field theory. We successfully construct a theoretical method for calculating this degree of the alternative configuration by using cluster approximation. It is shown that the theoretical results coincide with those of the simulations very well.
△ Less
Submitted 27 October, 2008;
originally announced October 2008.
-
An information-based traffic control in a public conveyance system: reduced clustering and enhanced efficiency
Authors:
A. Tomoeda,
K. Nishinari,
D. Chowdhury,
A. Schadschneider
Abstract:
A new public conveyance model applicable to buses and trains is proposed in this paper by using stochastic cellular automaton. We have found the optimal density of vehicles, at which the average velocity becomes maximum, significantly depends on the number of stops and passengers behavior of getting on a vehicle at stops. The efficiency of the hail-and-ride system is also discussed by comparing…
▽ More
A new public conveyance model applicable to buses and trains is proposed in this paper by using stochastic cellular automaton. We have found the optimal density of vehicles, at which the average velocity becomes maximum, significantly depends on the number of stops and passengers behavior of getting on a vehicle at stops. The efficiency of the hail-and-ride system is also discussed by comparing the different behavior of passengers. Moreover, we have found that a big cluster of vehicles is divided into small clusters, by incorporating information of the number of vehicles between successive stops.
△ Less
Submitted 19 September, 2007; v1 submitted 12 April, 2007;
originally announced April 2007.
