-
Modelling laminar flow in V-shaped filters integrated with catalyst technologies for atmospheric pollutant removal
Authors:
Samuel D. Tomlinson,
Aliki M. Tsopelakou,
Tzia M. Onn,
Steven R. H. Barrett,
Adam M. Boies,
Shaun D. Fitzgerald
Abstract:
Atmospheric pollution from particulate matter, volatile organic compounds and greenhouse gases is a critical environmental and public health issue, leading to respiratory diseases and climate change. A potential mitigation strategy involves utilising ventilation systems, which process large volumes of indoor and outdoor air and remove particulate pollutants through filtration. However, the integra…
▽ More
Atmospheric pollution from particulate matter, volatile organic compounds and greenhouse gases is a critical environmental and public health issue, leading to respiratory diseases and climate change. A potential mitigation strategy involves utilising ventilation systems, which process large volumes of indoor and outdoor air and remove particulate pollutants through filtration. However, the integration of catalytic technologies with filters in ventilation systems remains underexplored, despite their potential to simultaneously remove particulate matter and gases, as seen in flue gas treatment and automotive exhaust systems. In this study, we develop a predictive, long-wave model for V-shaped filters, with and without separators. The model, validated against experimental and numerical data, provides a framework for enhancing flow rates by increasing fibre diameter and porosity while reducing aspect ratio and filter thickness. These changes lead to increased permeability, which lowers energy requirements. However, they also reduce the pollutant removal efficiency, highlighting the trade-off between flow, filtration performance and operational costs. Leveraging the long-wave model alongside experimental results, we estimate the maximum potential removal rate ($2\times10^{-4}$ GtPM$_{2.5}$, $2\times10^{-3}$ GtNO$_{\text{x}}$, $9\times10^{-3}$ GtCH$_{4}$ per year) and minimum cost (\$$7\times10^{4}$ per tNO$_{\text{x}}$, \$$2\times10^{4}$ per tCH$_{4}$) if a billion V-shaped filters integrated with catalytic enhancements were deployed in operation. These findings highlight the feasibility of catalytic filters as a scalable, high-efficiency solution for improving air quality and mitigating atmospheric pollution.
△ Less
Submitted 31 May, 2025;
originally announced June 2025.
-
Harnessing natural and mechanical airflows for surface-based atmospheric pollutant removal
Authors:
Samuel D. Tomlinson,
Aliki M. Tsopelakou,
Tzia M. Onn,
Steven R. H. Barrett,
Adam M. Boies,
Shaun D. Fitzgerald
Abstract:
Removal strategies for atmospheric pollutants are increasingly being considered to mitigate global warming and improve public health. However, surface-based removal techniques, such as sorption, catalysis and filtration, are often limited by pollutant transport and removal rate constraints. We evaluate the atmospheric pollutant transport to surfaces and assess the potential of surface-based remova…
▽ More
Removal strategies for atmospheric pollutants are increasingly being considered to mitigate global warming and improve public health. However, surface-based removal techniques, such as sorption, catalysis and filtration, are often limited by pollutant transport and removal rate constraints. We evaluate the atmospheric pollutant transport to surfaces and assess the potential of surface-based removal technologies for applications in airflow through cities, HVAC systems and over vehicles. If these removal technologies are applied to their surfaces, cities, solar farms, HVAC systems and filters can achieve atmospheric pollutant removal rates that exceed 1 GtCO$_2$e annually (20-year GWP). Cities have the highest atmospheric pollutant removal potential, with estimates averaging 30 GtCO$_2$, 0.06 GtCH$_4$, 0.0001 GtPM$_{2.5}$, 0.007 GtNO$_\text{x}$ annually. HVAC filters can achieve atmospheric pollutant removal costs as low as \$300 per tCO$_2$e removed when sorption or catalyst technologies are incorporated into their fibre sheets, outperforming the \$2000 per tCO$_2$e removal cost when these technologies are applied to city surfaces. This estimate is based on the literature values for these technologies' costs per square meter. However, our calculations indicate that optimising catalyst properties and surface coverage could lower the cost estimates to below \$100 per tCO$_2$e across these applications. These findings demonstrate that integrating surface-based pollutant removal technologies into infrastructure may offer a scalable pathway to advance climate and health objectives.
△ Less
Submitted 22 May, 2025; v1 submitted 14 March, 2025;
originally announced March 2025.
-
Drag reduction in surfactant-contaminated superhydrophobic channels at high Péclet numbers
Authors:
Samuel D. Tomlinson,
Frédéric Gibou,
Paolo Luzzatto-Fegiz,
Fernando Temprano-Coleto,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Motivated by microfluidic applications, we investigate drag reduction in laminar pressure-driven flows in channels with streamwise-periodic superhydrophobic surfaces (SHSs) contaminated with soluble surfactant. We develop a model in the long-wave and weak-diffusion limit, where the streamwise SHS period is large compared to the channel height and the Péclet number is large. Using asymptotic and nu…
▽ More
Motivated by microfluidic applications, we investigate drag reduction in laminar pressure-driven flows in channels with streamwise-periodic superhydrophobic surfaces (SHSs) contaminated with soluble surfactant. We develop a model in the long-wave and weak-diffusion limit, where the streamwise SHS period is large compared to the channel height and the Péclet number is large. Using asymptotic and numerical techniques, we determine the influence of surfactant on drag reduction in terms of the relative strength of advection, diffusion, Marangoni effects and bulk-surface exchange. In scenarios with strong exchange, the drag reduction exhibits a complex dependence on the thickness of the bulk-concentration boundary layer and surfactant strength. Strong Marangoni effects immobilise the interface through a linear surfactant distribution, whereas weak Marangoni effects yield a quasi-stagnant cap. The quasi-stagnant cap has an intricate structure with an upstream slip region, followed by intermediate inner regions, and a quasi-stagnant region that is mediated by weak bulk diffusion. The quasi-stagnant region differs from the immobile region of a classical stagnant cap, observed for instance in surfactant-laden air bubbles in water, by displaying weak slip. As exchange weakens, the bulk and interface decouple: the surfactant distribution is linear when the surfactant is strong, whilst it forms a classical stagnant cap when the surfactant is weak. The asymptotic solutions offer closed-form predictions of drag reduction across much of the parameter space, providing practical utility and enhancing understanding of surfactant dynamics in flows over SHSs.
△ Less
Submitted 21 February, 2025; v1 submitted 21 June, 2024;
originally announced June 2024.
-
Unsteady evolution of slip and drag in surfactant-contaminated superhydrophobic channels
Authors:
Samuel D. Tomlinson,
Frédéric Gibou,
Paolo Luzzatto-Fegiz,
Fernando Temprano-Coleto,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Recognising that surfactants can impede the drag reduction resulting from superhydrophobic surfaces (SHSs), we investigate the impact of spatio-temporal fluctuations in surfactant concentration on the drag-reduction properties of SHSs. We model the unsteady transport of soluble surfactant in a channel flow bounded by two SHSs. The flow is laminar, pressure-driven, and the SHSs are periodic in the…
▽ More
Recognising that surfactants can impede the drag reduction resulting from superhydrophobic surfaces (SHSs), we investigate the impact of spatio-temporal fluctuations in surfactant concentration on the drag-reduction properties of SHSs. We model the unsteady transport of soluble surfactant in a channel flow bounded by two SHSs. The flow is laminar, pressure-driven, and the SHSs are periodic in the streamwise and spanwise directions. We assume that the channel length is much longer than the streamwise period, the streamwise period is much longer than the channel height and spanwise period, and bulk diffusion is sufficiently strong for cross-channel concentration gradients to be small. By combining long-wave and homogenisation theories, we derive an unsteady advection-diffusion equation for surfactant-flux transport over the length of the channel, which is coupled to a quasi-steady advection-diffusion equation for surfactant transport over individual plastrons. As diffusion over the length of the channel is typically small, the surfactant flux is governed by a nonlinear wave equation. In the fundamental case of the transport of a bolus of surfactant, we predict its propagation speed and describe its nonlinear evolution via interaction with the SHS. The propagation speed can fall below the average streamwise velocity as the surfactant adsorbs and rigidifies the plastrons. Smaller concentrations of surfactant are advected faster than larger ones, so that wave-steepening effects can lead to shock formation in the surfactant-flux distribution. Our asymptotic results reveal how unsteady surfactant transport can affect the spatio-temporal evolution of the slip velocity, drag reduction and effective slip length in SHS channels.
△ Less
Submitted 22 February, 2024; v1 submitted 27 October, 2023;
originally announced October 2023.
-
A model for slip and drag in turbulent flows over superhydrophobic surfaces with surfactant
Authors:
Samuel D. Tomlinson,
François Peaudecerf,
Fernando Temprano-Coleto,
Frederic Gibou,
Paolo Luzzatto-Fegiz,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Superhydrophobic surfaces (SHSs) can reduce the friction drag in turbulent flows. In the laminar regime, it has been shown that trace amounts of surfactant can negate this drag reduction, at times rendering these surfaces no better than solid walls (Peaudecerf et al., Proc. Natl. Acad. Sci. USA 114(28), 7254-9, 2017). However, surfactant effects on the drag-reducing properties of SHSs have not yet…
▽ More
Superhydrophobic surfaces (SHSs) can reduce the friction drag in turbulent flows. In the laminar regime, it has been shown that trace amounts of surfactant can negate this drag reduction, at times rendering these surfaces no better than solid walls (Peaudecerf et al., Proc. Natl. Acad. Sci. USA 114(28), 7254-9, 2017). However, surfactant effects on the drag-reducing properties of SHSs have not yet been studied under turbulent flow conditions, where predicting the effects of surfactant in direct numerical simulations remains expensive by today's standards. We present a model for turbulent flow inclusive of surfactant, in either a channel or boundary-layer configuration, over long but finite-length streamwise ridges that are periodic in the spanwise direction, with period $P$ and gas fraction $\varphi$. We adopt a technique based on a shifted log law to acquire an expression for the drag reduction. The average streamwise and spanwise slip lengths are derived by introducing a local laminar model within the viscous sublayer, whereby the effect of surfactant is modelled by modifying the average streamwise and spanwise slip lengths. Our model agrees with available laboratory experimental data from the literature when conditions are clean (surfactant-free), or when there are low surfactant levels. However, we find an appreciable drag increase for larger background surfactant concentrations that are characteristic of turbulent flows over SHSs for marine applications.
△ Less
Submitted 3 February, 2023;
originally announced February 2023.
-
Laminar drag reduction in surfactant-contaminated superhydrophobic channels
Authors:
Samuel D. Tomlinson,
Frédéric Gibou,
Paolo Luzzatto-Fegiz,
Fernando Temprano-Coleto,
Oliver E. Jensen,
Julien R. Landel
Abstract:
While superhydrophobic surfaces (SHSs) show promise for drag reduction applications, their performance can be compromised by traces of surfactant, which generate Marangoni stresses that increase drag. This question is addressed for soluble surfactant in a three-dimensional laminar channel flow, with periodic SHSs on both walls. We assume that diffusion is sufficiently strong for cross-channel conc…
▽ More
While superhydrophobic surfaces (SHSs) show promise for drag reduction applications, their performance can be compromised by traces of surfactant, which generate Marangoni stresses that increase drag. This question is addressed for soluble surfactant in a three-dimensional laminar channel flow, with periodic SHSs on both walls. We assume that diffusion is sufficiently strong for cross-channel concentration gradients to be small. Exploiting a long-wave theory that accounts for a rapid transverse Marangoni-driven flow, we derive a one-dimensional model for surfactant evolution, which allows us to predict the drag reduction across the parameter space. The system exhibits multiple regimes, involving competition between Marangoni effects, bulk and interfacial diffusion, advection and shear dispersion. We map out asymptotic regions in the high-dimensional parameter space, deriving approximations of the drag reduction in each region and comparing them to numerical simulations. Our atlas of maps provides a comprehensive analytical guide for designing surfactant-contaminated channels with SHSs, to maximise the drag reduction in applications.
△ Less
Submitted 27 March, 2023; v1 submitted 11 September, 2022;
originally announced September 2022.
-
Optimising a Muon Spectrometer for Measurements at the ISIS Pulsed Muon Source
Authors:
S. R. Giblin,
S. P. Cottrell,
P. J. C. King,
S. Tomlinson,
S. J. S. Jago,
L. J. Randall,
M. J. Roberts,
J. Norris,
S. Howarth,
Q. B. Mutamba,
N. J. Rhodes,
F. Akeroyd
Abstract:
This work describes the development of a state-of-the-art muon spectrometer for the ISIS pulsed muon source. Conceived as a major upgrade of the highly successful EMU instrument, emphasis has been placed on making effective use of the enhanced flux now available at the ISIS source. This has been achieved both through the development of a highly segmented detector array and enhanced data acquisitio…
▽ More
This work describes the development of a state-of-the-art muon spectrometer for the ISIS pulsed muon source. Conceived as a major upgrade of the highly successful EMU instrument, emphasis has been placed on making effective use of the enhanced flux now available at the ISIS source. This has been achieved both through the development of a highly segmented detector array and enhanced data acquisition electronics. The pulsed nature of the ISIS beam is particularly suited to the development of novel experiments involving external stimuli, and therefore the ability to sequence external equipment has been added to the acquisition system. Finally, the opportunity has also been taken to improve both the magnetic field and temperature range provided by the spectrometer, to better equip the instrument for running the future ISIS user programme.
△ Less
Submitted 17 April, 2014;
originally announced April 2014.
