-
The influence of boundary conditions and interfacial slip on the time taken to achieve a nonequilibrium steady-state for highly confined flows
Authors:
Carmelo Riccardo Civello,
Luca Maffioli,
Joseph Johnson,
Edward R. Smith,
James P. Ewen,
Peter J. Daivis,
Daniele Dini,
B. D. Todd
Abstract:
We investigate the equilibration time to attain steady-state for a system of liquid molecules under boundary-driven planar Couette flow via nonequilibrium molecular dynamics (NEMD) simulation. In particular, we examine the equilibration time for the two common types of boundary driven flow: one in which both walls slide with equal and opposite velocity, and the other in which one wall is fixed and…
▽ More
We investigate the equilibration time to attain steady-state for a system of liquid molecules under boundary-driven planar Couette flow via nonequilibrium molecular dynamics (NEMD) simulation. In particular, we examine the equilibration time for the two common types of boundary driven flow: one in which both walls slide with equal and opposite velocity, and the other in which one wall is fixed and the other moves with twice the velocity. Both flows give identical steady-state strain rates, and hence flow properties, but the transient behaviour is completely different. We find that in the case of no-slip boundary conditions, the equilibration times for the counter-sliding walls flow are exactly 4 times faster than those of the single sliding wall system, and this is independent of the atomistic nature of the fluid, i.e., it is an entirely hydrodynamic feature. We also find that systems that exhibit slip have longer equilibration times in general and the ratio of equilibration times for the two types of boundary-driven flow is even more pronounced. We analyse the problem by decomposing a generic planar Couette flow into a linear sum of purely symmetric and antisymmetric flows. We find that the no-slip equilibration time is dominated by the slowest decaying eigenvalue of the solution to the Navier-Stokes equation. In the case of slip, the longest relaxation time is now dominated by the transient slip velocity response, which is longer than the no-slip response time. In the case of a high-slip system of water confined to graphene channels, the enhancement is over two orders of magnitude.
△ Less
Submitted 25 September, 2025;
originally announced September 2025.
-
Effects of electrostatic interactions on Kapitza resistance in hexagonal boron nitride-water interfaces
Authors:
Sobin Alosious,
Sridhar Kumar Kannam,
Sarith P. Sathian,
B. D. Todd
Abstract:
Electrostatic interactions in nanoscale systems can influence the heat transfer mechanism and interfacial properties. This study uses molecular dynamics simulations to investigate the impact of various electrostatic interactions on the Kapitza resistance ($R_k$) on a hexagonal boron nitride-water system. The Kapitza resistance at hexagonal boron nitride nanotube (hBNNT)-water interface reduces wit…
▽ More
Electrostatic interactions in nanoscale systems can influence the heat transfer mechanism and interfacial properties. This study uses molecular dynamics simulations to investigate the impact of various electrostatic interactions on the Kapitza resistance ($R_k$) on a hexagonal boron nitride-water system. The Kapitza resistance at hexagonal boron nitride nanotube (hBNNT)-water interface reduces with an increase in diameter of the nanotube due to more aggregation of water molecules per unit surface area. An increase in the partial charges on boron and nitride caused the reduction in $R_k$. With the increase in partial charge, a better hydrogen bonding between hBNNT and water was observed, whereas the structure and order of the water molecules remain the same. Nevertheless, the addition of NaCl salt into water does not have any influence on interfacial thermal transport. $R_k$ remains unchanged with electrolyte concentration since the cumulative Coulombic interaction between the ions, and the hBNNT is significantly less when compared with water molecules. Furthermore, the effect of electric field strength on interfacial heat transfer is also investigated by providing uniform positive and negative surface charges on the outermost hBN layers. $R_k$ is nearly independent of the practical range of applied electric fields and decreases with an increasing electric field for extreme field strengths until the electro-freezing phenomenon occurs. The ordering of water molecules towards the charged surface leads to an increase in the layering effect, causing the reduction in $R_k$ in the presence of an electric field.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Computation of the equilibrium three-particle entropy for dense atomic fluids by molecular dynamics simulation
Authors:
Luca Maffioli,
Nathan Clisby,
Federico Frascoli,
B. D. Todd
Abstract:
We have computed the two and three-particle contribution to the entropy of a Weeks-Chandler-Andersen fluid via molecular dynamics simulations. The three-particle correlation function and entropy were computed with a new method which simplified calculation. Results are qualitatively similar to Lennard-Jones systems. We observed a numerical instability in the three-particle contribution. This phenom…
▽ More
We have computed the two and three-particle contribution to the entropy of a Weeks-Chandler-Andersen fluid via molecular dynamics simulations. The three-particle correlation function and entropy were computed with a new method which simplified calculation. Results are qualitatively similar to Lennard-Jones systems. We observed a numerical instability in the three-particle contribution. This phenomenon has been previously detected when the traditional method is used, thus it is likely to be intrinsic in the computation. While the effect of statistical fluctuations can be removed through an extrapolation procedure, the discretization error due to finite bin size is more difficult to characterize. With a correct choice of the bin size, a good estimate of the three-particle entropy contribution can be achieved at any state, even close to the freezing point. We observed that, despite the fact that the magnitude of the three-particle contribution increases significantly compared to the two-particle contribution as freezing is approached, the error induced from overestimation of the excess entropy by the two and three-body terms exceeds that induced by approximating the excess entropy with the two body term alone.
△ Less
Submitted 7 January, 2020;
originally announced January 2020.
-
Measuring Heat Flux Beyond Fourier's law
Authors:
E. R. Smith,
P. J. Daivis,
B. D. Todd
Abstract:
We use nonequilibrium molecular dynamics (NEMD) to explore the effect of shear flow on heat flux. By simulating a simple fluid in a channel bounded by tethered atoms, the heat flux is computed for two systems: a temperature driven one with no flow and a wall driven, Couette flow system. The results for the temperature driven system give the Fourier's law thermal conductivity, which is shown to agr…
▽ More
We use nonequilibrium molecular dynamics (NEMD) to explore the effect of shear flow on heat flux. By simulating a simple fluid in a channel bounded by tethered atoms, the heat flux is computed for two systems: a temperature driven one with no flow and a wall driven, Couette flow system. The results for the temperature driven system give the Fourier's law thermal conductivity, which is shown to agree well with experiments. Through comparison of the two systems, we quantify the additional components of the heat flux parallel and normal to the walls due to shear flow. To compute the heat flux in the flow direction, the Irving-Kirkwood equations are integrated over a volume, giving the so-called volume average form, and they are also manipulated to get expressions for the surface averaged and method of planes forms. The method of planes and volume average forms are shown to give equivalent results for the heat flux when using small volumes. The heat flux in the flow direction is obtained consistently over a range of simulations, and it is shown to vary linearly with strain rate, as predicted by theory. The additional strain rate dependent component of the heat flux normal to the wall is obtained by fitting the strain rate dependence of the heat flux to the expected form. As a result, the additional terms in the thermal conductivity tensor quantified in this work should be experimentally testable.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Continuum Nanofluidics
Authors:
J. S. Hansen,
Jeppe C. Dyre,
Peter J. Daivis,
B. D. Todd,
Henrik Bruus
Abstract:
This paper introduces the fundamental continuum theory governing momentum transport in isotropic nanofluidic flows. The theory is an extension to the classical Navier-Stokes equation, which includes coupling between translational and rotational degrees of freedom, as well as non-local response functions that incorporates spatial correlations. The continuum theory is compared with molecular dynamic…
▽ More
This paper introduces the fundamental continuum theory governing momentum transport in isotropic nanofluidic flows. The theory is an extension to the classical Navier-Stokes equation, which includes coupling between translational and rotational degrees of freedom, as well as non-local response functions that incorporates spatial correlations. The continuum theory is compared with molecular dynamics simulation data for both relaxation processes and fluid flows showing excellent agreement on the nanometer length scale. We also present practical tools to estimate when the extended theory should be used.
△ Less
Submitted 22 August, 2015; v1 submitted 11 June, 2015;
originally announced June 2015.
-
Non-Newtonian behavior and molecular structure of Cooee bitumen under shear flow: a non-equilibrium molecular dynamics study
Authors:
Claire A. Lemarchand,
Nicholas P. Bailey,
Billy D. Todd,
Peter J. Daivis,
Jesper S. Hansen
Abstract:
The rheology and molecular structure of a model bitumen (Cooee bitumen) under shear are investigated in the non-Newtonian regime using non-equilibrium molecular dynamics simulations. The shear viscosity, normal stress differences and pressure of the bitumen mixture are computed at different shear rates and different temperatures. The model bitumen is shown to be a shear-thinning fluid at all tempe…
▽ More
The rheology and molecular structure of a model bitumen (Cooee bitumen) under shear are investigated in the non-Newtonian regime using non-equilibrium molecular dynamics simulations. The shear viscosity, normal stress differences and pressure of the bitumen mixture are computed at different shear rates and different temperatures. The model bitumen is shown to be a shear-thinning fluid at all temperatures. In addition, the Cooee model is able to reproduce experimental results showing the formation of nanoaggregates composed of stacks of flat aromatic molecules in bitumen. These nanoaggregates are immersed in a solvent of saturated hydrocarbon molecules. At a fixed temperature, the shear-shinning behavior is related to the inter- and intramolecular alignment of the solvent molecules, but also to the decrease of the average size of the nanoaggregates at high shear rates. The variation of the viscosity with temperature at different shear rates is also related to the size and relative composition of the nanoaggregates. The slight anisotropy of the whole sample due to the nanoaggregates is considered and quantified. Finally, the position of bitumen mixtures in the broad literature of complex systems such as colloidal suspensions, polymer solutions and associating polymer networks is discussed.
△ Less
Submitted 13 May, 2015; v1 submitted 3 January, 2015;
originally announced January 2015.
