Showing 1–6 of 6 results for author: Tkachenko, S

Exploring Scintillators and Cherenkov Radiators for MIP Timing Detectors

Authors: R. Cala', L. Martinazzoli, N. Kratochwil, I. Frank, M. Salomoni, F. Pagano, G. Terragni, C. Lowis, J. Chen, J. Pejchal, P. Bohacek, M. Nikl, S. Tkachenko, O. Sidlestkiy, M. Paganoni, M. Pizzichemi, E. Auffray

Abstract: This article presents the timing performance of materials with fast light emission, tested as Minimum Ionizing Particle detectors using 150 GeV hadron beams in Monte Carlo simulations and at the CERN SPS North Area. Pixels of cross-section 2 x 2 mm2 or 3 x 3 mm2 and length of 3 or 10 mm were coupled to Hamamatsu SiPM and read out by fast high-frequency electronics. Materials whose timing performan… ▽ More This article presents the timing performance of materials with fast light emission, tested as Minimum Ionizing Particle detectors using 150 GeV hadron beams in Monte Carlo simulations and at the CERN SPS North Area. Pixels of cross-section 2 x 2 mm2 or 3 x 3 mm2 and length of 3 or 10 mm were coupled to Hamamatsu SiPM and read out by fast high-frequency electronics. Materials whose timing performance relies on Cherenkov emission, namely BGSO, PWO, and PbF2, achieved time resolutions in the range 24-36ps. Scintillators as L(Y)SO:Ce, GAGG, and BaF2 reached below 15 ps, the best topping at 12.1 +/- 0.4 ps. These fast materials are compared to LYSO and their additional benefit is discussed. Given the promising results of BaF2, the study is completed with measurements of the scintillation properties of a set doped with yttrium to quench the slow light emission. △ Less

Submitted 20 January, 2025; v1 submitted 11 November, 2024; originally announced November 2024.

The slow relaxation of non-equilibrium state in metal target excited by picosecond electron beam: interferometric and simulation studies

Authors: S. V. Barakhvostov, N. B. Volkov, F. I. Lipchak, V. P. Tarakanov, S. I. Tkachenko, I. S. Turmyshev, A. P. Yalovets

Abstract: The experimental EXCITOR setup for obtaining the intense electron beams of picosecond duration is presented in this work. Cathodes of tungsten, graphite, copper and samarium of the same shape were used in these experiments. The interelectrode gap varied from 0.5 to 6 mm. Interferometric technique to detect anode rear side displacement was used. The time evolution of the displacement and speed of t… ▽ More The experimental EXCITOR setup for obtaining the intense electron beams of picosecond duration is presented in this work. Cathodes of tungsten, graphite, copper and samarium of the same shape were used in these experiments. The interelectrode gap varied from 0.5 to 6 mm. Interferometric technique to detect anode rear side displacement was used. The time evolution of the displacement and speed of the rear side of copper anode of 0.1 and 3.0 mm thickness was experimentally obtained. Simulation of the space-time characteristics evolution of the anode material is presented. △ Less

Submitted 1 June, 2018; originally announced June 2018.

Comments: Submitted to 6th International Congress Energy Fluxes and Radiation Effects (EFRE 2018), September 16-21, 2018, Tomsk, Russia. To be published in Journal of Physics: Conference Series, 10 pages, 11 figures

The peculiarities of near-cathode processes in air discharge at atmospheric pressure

Authors: E V Parkevich, M A Medvedev, A V Agafonov, S I Tkachenko, A V Oginov, A I Khirianova, A R Mingaleev, T A Shelkovenko, S A Pikuz

Abstract: Formation of near-cathode plasma at the instant of breakdown of the air gap was studied by the methods of picosecond laser probing. It was demonstrated that 1-2 ns after a sharp rise of the current through the discharge gap dense plasma clots with Ne~10^20 cm^-3 and dNe/dx ~ 10^24 cm^-4 are formed on the cathode surface. It was shown that these highly ionized regions lead to initiation and develop… ▽ More Formation of near-cathode plasma at the instant of breakdown of the air gap was studied by the methods of picosecond laser probing. It was demonstrated that 1-2 ns after a sharp rise of the current through the discharge gap dense plasma clots with Ne~10^20 cm^-3 and dNe/dx ~ 10^24 cm^-4 are formed on the cathode surface. It was shown that these highly ionized regions lead to initiation and development of the spark channel originating from the cathode. We propose that the observed formations correspond to erosive plasma formed from the cathode material. △ Less

Submitted 4 April, 2018; originally announced April 2018.

Comments: 9 pages, 7 figures, XXXIII International Conference on Equations of State for Matter, March 1-6, 2018, Elbrus, Kabardino-Balkaria, Russia, to be published in Journal of Physics: Conference Series

Radioactive contamination of SrI2(Eu) crystal scintillator

Authors: P. Belli, R. Bernabei, R. Cerulli, F. A. Danevich, E. Galenin, A. Gektin, A. Incicchitti, V. Isaienko, V. V. Kobychev, M. Laubenstein, S. S. Nagorny, R. B. Podviyanuk, S. Tkachenko, V. I. Tretyak

Abstract: A strontium iodide crystal doped by europium (SrI2(Eu)) was produced by using the Stockbarger growth technique. The crystal was subjected to a characterization that includes relative photoelectron output and energy resolution for gamma quanta. The intrinsic radioactivity of the SrI2(Eu) crystal scintillator was tested both by using it as scintillator at sea level and by ultra-low background HPGe g… ▽ More A strontium iodide crystal doped by europium (SrI2(Eu)) was produced by using the Stockbarger growth technique. The crystal was subjected to a characterization that includes relative photoelectron output and energy resolution for gamma quanta. The intrinsic radioactivity of the SrI2(Eu) crystal scintillator was tested both by using it as scintillator at sea level and by ultra-low background HPGe gamma spectrometry deep underground. The response of the SrI2(Eu) detector to alpha particles (alpha/beta ratio and pulse shape) was estimated by analysing the 226Ra internal trace contamination of the crystal. We have measured: alpha/beta=0.55 at E_alpha=7.7 MeV, and no difference in the time decay of the scintillation pulses induced by alpha particles and gamma quanta. The application of the obtained results in the search for the double electron capture and electron capture with positron emission in 84Sr has been investigated at a level of sensitivity: T_1/2 \sim 10^{15}-10^{16} yr. The results of these studies demonstrate the potentiality of this material for a variety of scintillation applications, including low-level counting experiments. △ Less

Submitted 15 December, 2011; v1 submitted 23 November, 2011; originally announced November 2011.

Comments: 24 pages, 12 figures, 4 tables, accepted for publication on Nucl. Instrum. Meth. A

Journal ref: Nucl. Instrum. Meth. A 670 (2012) 10

The Effects of Preheating of a Fine Tungsten Wire and the Polarity of a High-Voltage Electrode on the Energy Characteristics of an Electrically Exploded Wire in Vacuum

Authors: A. G. Rousskikh, R. B. Baksht, S. A. Chaikovsky, A. V. Fedunin, K. V. Khishchenko, A. Yu. Labetsky, P. R. Levashov, A. V. Shishlov, S. I. Tkachenko

Abstract: Results obtained from experimental and numerical studies of tungsten wires electrical explosion in vacuum are presented. The experiments were performed both with and without preheating of the wires, using positive or negative polarity of a high-voltage electrode. Preheating is shown to increase energy deposition in the wire core due to a longer resistive heating stage. The effect was observed bo… ▽ More Results obtained from experimental and numerical studies of tungsten wires electrical explosion in vacuum are presented. The experiments were performed both with and without preheating of the wires, using positive or negative polarity of a high-voltage electrode. Preheating is shown to increase energy deposition in the wire core due to a longer resistive heating stage. The effect was observed both in single wire and wire array experiments. The evolution of the phase state of the wire material during explosion was examined by means of one-dimensional numerical simulation using a semiempirical wide-range equation of state describing the properties of tungsten with allowance made for melting and vaporization. △ Less

Submitted 25 August, 2006; originally announced August 2006.

Comments: 9 pages, 9 Postscript figures

Influence of equation of state on interpretation of electrical conductivity measurements in strongly coupled tungsten plasma

Authors: S. I. Tkachenko, P. R. Levashov, K. V. Khishchenko

Abstract: We study the influence of equation-of-state (EOS) model on the interpretation of electrical conductivity measurements in strongly coupled plasma of tungsten by Korobenko et al. (2002 Plasma Physics Reports 28(12) 1008--1016). Three different semiempirical EOS models for tungsten are used. Discrepancies in obtained thermodynamic parameters and specific resistivity values as compared with calculat… ▽ More We study the influence of equation-of-state (EOS) model on the interpretation of electrical conductivity measurements in strongly coupled plasma of tungsten by Korobenko et al. (2002 Plasma Physics Reports 28(12) 1008--1016). Three different semiempirical EOS models for tungsten are used. Discrepancies in obtained thermodynamic parameters and specific resistivity values as compared with calculation results of Korobenko et al. are analysed. △ Less

Submitted 5 May, 2006; originally announced May 2006.

Comments: 11 pages, 5 Postscript figures, accepted for publication in J. Phys. A: Math. Gen