-
Spinning Twisted Ribbons: When Two Holes Meet on a Curved Liquid Film
Authors:
Jack H. Y. Lo,
Yuan Liu,
Tariq Alghamdi,
Muhammad F. Afzaal,
S. T. Thoroddsen
Abstract:
The rupture of a liquid film, where a thin liquid layer between two other fluids breaks and forms holes, commonly occurs in both natural phenomena and industrial applications. The post-rupture dynamics, from initial hole formation to the complete collapse of the film, are crucial because they govern droplet formation, which plays a significant role in many applications such as disease transmission…
▽ More
The rupture of a liquid film, where a thin liquid layer between two other fluids breaks and forms holes, commonly occurs in both natural phenomena and industrial applications. The post-rupture dynamics, from initial hole formation to the complete collapse of the film, are crucial because they govern droplet formation, which plays a significant role in many applications such as disease transmission, aerosol formation, spray drying nanodrugs, oil spill remediation, inkjet printing, and spray coating. While single-hole rupture has been extensively studied, the dynamics of multiple-hole ruptures, especially the interactions between neighboring holes, are less well understood. Here, this study reveals that when two holes 'meet' on a curved film, the film evolves into a spinning twisted ribbon before breaking into droplets, distinctly different from what occurs on flat films. We explain the formation and evolution of the spinning twisted ribbon, including its geometry, corrugations, ligaments, and orbits, and compare the experimental observations with models. We compare and contrast this phenomena with its counterpart on planar films. While our experiments are based on the multiple-hole ruptures in corona splash, the underlying principles are likely applicable to other systems. This study sheds light on understanding and controlling droplet formation in multiple-hole rupture, improving public health, climate science, and various industrial applications.
△ Less
Submitted 30 June, 2025; v1 submitted 15 November, 2024;
originally announced November 2024.
-
Circulation in turbulent flow through a contraction
Authors:
Vivek Mugundhan,
Sigurdur T. Thoroddsen
Abstract:
We study experimentally the statistical properties and evolution of circulation in a turbulent flow passing through a smooth 2-D contraction. The turbulence is generated with an active grids to reach $Re_λ \simeq 220$ at the inlet to the 2.5:1 contraction. We employ time-resolved 3-D Lagrangian Particle Tracking technique with the Shake-The-Box algorithm to obtain volumetric velocity fields which…
▽ More
We study experimentally the statistical properties and evolution of circulation in a turbulent flow passing through a smooth 2-D contraction. The turbulence is generated with an active grids to reach $Re_λ \simeq 220$ at the inlet to the 2.5:1 contraction. We employ time-resolved 3-D Lagrangian Particle Tracking technique with the Shake-The-Box algorithm to obtain volumetric velocity fields which we use to calculate the simultaneous circulation in three perpendicular planes. Forming a circulation vector and studying the PDFs of the relative strength of its components, we can quantify how the mean strain enhances and orients coherent vortical structures with the streamwise direction. This is further studied with streamwise space and time correlations of the circulations over a range of loop sizes. The streamwise component of the circulation, over same-size square loops, shows increased integral length, while the other two components are less affected. The circulation around the compressive direction weakens and reaches prominent negative correlation values, suggesting buckling or sharp reorientation of transverse vortices. The PDFs of circulation transit from non-Gaussian to Gaussian behavior as the loop size is increased from dissipative to large scales.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Coherent turbulent structures in a rapid contraction
Authors:
Abdullah A. Alhareth,
Vivek Mugundhan,
Kenneth R. Langley,
Sigurður T. Thoroddsen
Abstract:
The coherent vortical structures in turbulent flow through a strong 16:1 3-D contraction, are studied using time-resolved volumetric measurements. Visualization using vorticity magnitude criterion shows the emergence of long, stretched cylindrical vortices aligned with the mean flow. This alignment is quantified by PDFs of the direction cosines. We propose two measures to quantify the alignment, t…
▽ More
The coherent vortical structures in turbulent flow through a strong 16:1 3-D contraction, are studied using time-resolved volumetric measurements. Visualization using vorticity magnitude criterion shows the emergence of long, stretched cylindrical vortices aligned with the mean flow. This alignment is quantified by PDFs of the direction cosines. We propose two measures to quantify the alignment, the peak height in the probability and a coefficient from the moment of the PDF, both of which reaffirm the strong streamwise alignment. The r.m.s. streamwise vorticty grows within the contraction to becoming 4.5 times larger than the transverse component, at the downstream location where the contraction ratio C=11. The characteristic vortices become as long as the measurement volume, or more than 4 times the integral scale at the entrance to the contraction. We also characterize the vorticity enhancement along individual vortices, measuring 65% strengthening over the distance where C goes from 4 to 11. The prevalence of these coherent structures is estimated from 700,000 measured volumes, showing that near the outlet it is more likely to have 1 or 2 of these structures present than none.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Conical-focusing: Mechanism for singular jetting from collapsing drop-impact craters
Authors:
Yuan Si Tian,
Zi Qiang Yang,
Sigurður T. Thoroddsen
Abstract:
Fast microjets can emerge out of liquid pools from the rebounding of drop-impact craters, or when a bubble bursts at it surface. The fastest jets are the narrowest and are a source of aerosols both from the ocean and a glass of champagne, of importance to climate and the olfactory senses. The most singular jets, which have a maximum velocity of 137$\pm$4 m/s and diameter of 12 $μ$m under reduced a…
▽ More
Fast microjets can emerge out of liquid pools from the rebounding of drop-impact craters, or when a bubble bursts at it surface. The fastest jets are the narrowest and are a source of aerosols both from the ocean and a glass of champagne, of importance to climate and the olfactory senses. The most singular jets, which have a maximum velocity of 137$\pm$4 m/s and diameter of 12 $μ$m under reduced ambient pressure, are produced when a small dimple forms at the crater bottom and rebounds without pinching off a small bubble. The rebounding of this dimple is purely inertial but highly sensitive on initial conditions. High-resolution numerical simulations reveal a new focusing mechanism, which drives the fastest jet within a converging conical channel, where an entrained air-sheet provides effective slip at the outer boundary of the conically converging flow into the jet. This configuration bypasses any viscous cut-off of the jetting speed and explains the extreme sensitivity observed in detailed experiments of the phenomenon.
△ Less
Submitted 8 September, 2022;
originally announced September 2022.
-
Direct imaging of polymer filaments pulled from rebounding drops
Authors:
Ziqiang Yang,
Peng Zhang,
Meng Shi,
Ali Al Julaih,
Himanshu Mishra,
Enzo Di Fabrizio,
Sigurdur Thoroddsen
Abstract:
Polymer filaments form the foundation of biology from cell scaffolding to DNA. Their study and fabrication play an important role in a wide range of processes from tissue engineering to molecular machines. We present a simple method to deposit stretched polymer fibers between micro-pillars. This occurs when a polymeric drop impacts on and rebounds from an inclined superhydrophobic substrate. It we…
▽ More
Polymer filaments form the foundation of biology from cell scaffolding to DNA. Their study and fabrication play an important role in a wide range of processes from tissue engineering to molecular machines. We present a simple method to deposit stretched polymer fibers between micro-pillars. This occurs when a polymeric drop impacts on and rebounds from an inclined superhydrophobic substrate. It wets the top of the pillars and pulls out liquid filaments which are stretched and can attach to adjacent pillars leaving minuscule threads, with the solvent evaporating to leave the exposed polymers. We use high-speed video at the microscale to characterize the most robust filament-forming configurations, by varying the impact velocity, substrate structure and inclination angle, as well as the PEO-polymer concentration. Impacts onto plant leaves or randomized nano-structured surface leads to the formation of a branched structure, through filament mergers at the free surface of the drop. SEM shows the deposition of filament bundles which are thinner than those formed by evaporation or rolling drops. Raman spectroscopy identifies mode B stretched DNA filaments from aqueous-solution droplets.
△ Less
Submitted 4 April, 2022; v1 submitted 6 March, 2022;
originally announced March 2022.
-
Dynamic transition approaching jetting singularity during the collapse of drop-impact craters
Authors:
Zi Qiang Yang,
Yuan Si Tian,
Sigurður T Thoroddsen
Abstract:
Understanding the dynamical transition from capillary-driven to pure inertial focusing is important to revealing the mechanism underlying the most singular micro-jetting produced from drop-impact craters. Herein we study dimple dynamics from the collapse of these craters when the drop is of a different immiscible liquid than the pool. The parameter space is considerably more complex than for ident…
▽ More
Understanding the dynamical transition from capillary-driven to pure inertial focusing is important to revealing the mechanism underlying the most singular micro-jetting produced from drop-impact craters. Herein we study dimple dynamics from the collapse of these craters when the drop is of a different immiscible liquid than the pool. The parameter space is considerably more complex than for identical liquids, revealing intricate compound-dimple shapes. In contrast to the universal capillary-inertial drop pinch-off regime, where the neck radius scales as $R\sim t^{2/3}$, a purely inertial collapse of the air-dimple portrays $R \sim t^{1/2}$ and is sensitive to initial and boundary conditions. Capillary waves can therefore mold the dimple into different collapse shapes. We observe a clear cross-over in the nature of the dynamics from capillary-inertial to purely inertial immediately before the pinch-off. Notably, for singular jetting the cross-over time occurs much earlier, irrespective of the Weber number.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Multitude of singular jets during the collapse of drop-impact craters
Authors:
Zi Qiang Yang,
Yuan Si Tian,
Sigurður T. Thoroddsen
Abstract:
We study singular jets from the collapse of drop-impact craters, when the drop and pool are of different immiscible liquids. These jets emerge from a dimple at the bottom of the rebounding crater, when no bubble is pinched off. The parameter space is considerably more complex than for identical liquids, revealing intricate compound-dimple shapes. In contrast to the universal capillary-inertial dro…
▽ More
We study singular jets from the collapse of drop-impact craters, when the drop and pool are of different immiscible liquids. These jets emerge from a dimple at the bottom of the rebounding crater, when no bubble is pinched off. The parameter space is considerably more complex than for identical liquids, revealing intricate compound-dimple shapes. In contrast to the universal capillary-inertial drop-regime, where the pinch-off neck radius scales as $R\sim t^{2/3}$, a purely inertial air-dimple has $R \sim t^{1/2}$ and is sensitive to initial and boundary conditions. Capillary waves can therefore mold the dimple into different collapse shapes, with normalized jetting speeds one order of magnitude larger than for jets from bursting bubbles. We study the cross-over between the two power-laws. The fastest jets can pinch off a toroidal micro-bubble from the cusp at the base of the jet.
△ Less
Submitted 28 October, 2020; v1 submitted 12 February, 2020;
originally announced February 2020.
-
Navier slip model of drag reduction by Leidenfrost vapour layers
Authors:
Joseph D Berry,
Ivan U. Vakarelski,
Derek Y. C. Chan,
Sigurdur T. Thoroddsen
Abstract:
Recent experiments found that a hot solid sphere that is able to sustain a stable Leidenfrost vapour layer in a liquid exhibits significant drag reduction during free fall. The variation of the drag coefficient with Reynolds number shows substantial deviation from the characteristic drag crisis behavior at high Reynolds numbers. Results obtained with liqiuds of different viscosities show that onse…
▽ More
Recent experiments found that a hot solid sphere that is able to sustain a stable Leidenfrost vapour layer in a liquid exhibits significant drag reduction during free fall. The variation of the drag coefficient with Reynolds number shows substantial deviation from the characteristic drag crisis behavior at high Reynolds numbers. Results obtained with liqiuds of different viscosities show that onset of the drag crisis depends on the viscosity ratio of the vapor to the liquid. The key feature of the vapour layer in facilitating tangential flow and in altering the behaviour of the boundary layer can be captured by the Navier slip model that is defined by a slip length. Here, direct numerical and large eddy simulations of flow past a sphere at moderate to high Reynolds numbers ($10^2 \leq \mbox{Re} \leq 4 \times 10^4$) are employed to quantify comparisons with experimental results in terms of variations of the drag coefficient with Reynolds number and the form of the downstream wake on the sphere. This provides a simple one parameter characterization of the drag reduction phenomenon.
△ Less
Submitted 26 June, 2017; v1 submitted 26 December, 2016;
originally announced December 2016.
-
Vortex ring induced large bubble entrainment during drop impact
Authors:
Marie-Jean Thoraval,
Yangfan Li,
Sigurdur T. Thoroddsen
Abstract:
For a limited set of impact conditions, a drop impacting onto a pool can entrap an air bubble as large as its own size. The subsequent rise and rupture of this large bubble plays an important role in aerosol formation and gas transport at the air-sea interface. The large bubble is formed when the impact crater closes up near the pool surface and is known to occur only for drops which are prolate a…
▽ More
For a limited set of impact conditions, a drop impacting onto a pool can entrap an air bubble as large as its own size. The subsequent rise and rupture of this large bubble plays an important role in aerosol formation and gas transport at the air-sea interface. The large bubble is formed when the impact crater closes up near the pool surface and is known to occur only for drops which are prolate at impact. Herein we use experiments and numerical simulations to show that a concentrated vortex ring, produced in the neck between the drop and pool, controls the crater deformations and pinch-off. However, it is not the strongest vortex rings which are responsible for the large bubbles, as they interact too strongly with the pool surface and self-destruct. Rather, it is somewhat weaker vortices which can deform the deeper craters, which manage to pinch off the large bubbles. These observations also explain why the strongest and most penetrating vortex rings emerging from drop impacts, are not produced by oblate drops but by more prolate drop shapes, as had been observed in previous experiments.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Piezoelectric Drop-on-Demand Inkjet Printing of Rat Fibroblast Cells: Survivability Study and Pattern Printing
Authors:
Er Qiang Li,
Eng Khoon Tan,
Sigurdur Tryggvi Thoroddsen
Abstract:
A novel piezoelectric, drop-on-demand (DOD) inkjet system has been developed and used to print L929 rat fibroblast cells. We investigate the survivability of the cells subjected to the large stresses during the printing process. These stresses are varied by changing the diameter of the orifice (36 to 119 microns) through which the cells are dispensed, as well as changing the electrical pulse used…
▽ More
A novel piezoelectric, drop-on-demand (DOD) inkjet system has been developed and used to print L929 rat fibroblast cells. We investigate the survivability of the cells subjected to the large stresses during the printing process. These stresses are varied by changing the diameter of the orifice (36 to 119 microns) through which the cells are dispensed, as well as changing the electrical pulse used to drive the piezoelectric element. It is shown that for the smallest 36 microns diameter orifice, cell survival rates fall from 95% to approximately 76% when the ejection velocity is increased from 2 to 16 m/s. This decrease in survival rates is less significant when the larger orifice diameters of 81 microns and 119 microns are used. Analysis shows that there is a clear inverse relationship between cell survival rates and the mean shear rates during drop formation. By using the same printing set-up, fibroblast cells are printed onto alginate and collagen into patterns. Printed cells are cultured over a period of days to verify their long-term viability. Fibroblasts printed onto the collagen are found to successfully adhere, spread and proliferate, subsequently forming a denser patterns after 5 days in culture. Cell agglomeration is found to affect the printing performance, especially for the printhead with the smallest orifice, leading to frequent clogging of the nozzle. We also study the number of cells in each droplet, when printed under optimal conditions. The probability density of this number follows a binomial distribution, which consistent with a uniform distribution of cells in the medium and within the printhead.
△ Less
Submitted 2 October, 2013;
originally announced October 2013.
-
Drop impact entrapment of bubble rings
Authors:
M. -J. Thoraval,
K. Takehara,
T. G. Etoh,
S. T. Thoroddsen
Abstract:
We use ultra-high-speed video imaging to look at the initial contact of a drop impacting onto a liquid layer. We observe experimentally the vortex street and the bubble-ring entrapments predicted numerically, for high impact velocities, by Thoraval et al. [Phys. Rev. Lett. 108, 264506 (2012)]. These dynamics occur mostly within 50 μs after the first contact, requiring imaging at 1 million frames/s…
▽ More
We use ultra-high-speed video imaging to look at the initial contact of a drop impacting onto a liquid layer. We observe experimentally the vortex street and the bubble-ring entrapments predicted numerically, for high impact velocities, by Thoraval et al. [Phys. Rev. Lett. 108, 264506 (2012)]. These dynamics occur mostly within 50 μs after the first contact, requiring imaging at 1 million frames/sec. For a water drop impacting onto a thin layer of water, the entrapment of isolated bubbles starts through azimuthal instability, which forms at low impact velocities, in the neck connecting the drop and pool. For Re above about 12 000, up to 10 partial bubble-rings have been observed at the base of the ejecta, starting when the contact is about 20% of the drop size. More regular bubble rings are observed for a pool of ethanol or methanol. The video imaging shows rotation around some of these air cylinders, which can temporarily delay their breakup into microbubbles. The different refractive index in the pool liquid reveals the destabilization of the vortices and the formation of streamwise vortices and intricate vortex tangles. Fine-scale axisymmetry is thereby destroyed. We show also that the shape of the drop has a strong influence on these dynamics.
△ Less
Submitted 13 November, 2012;
originally announced November 2012.
-
Bubble Chandeliers
Authors:
Sigurdur T. Thoroddsen,
Marie-Jean Thoraval,
Kohsei Takehara,
Takeharu Goji Etoh
Abstract:
When a drop impacts at very low velocity onto a pool surface it is cushioned by a thin layer of air, which can be stretched into a hemispheric shape. We use ultra-high-speed video imaging to show how this thin air-layer ruptures. The number and locations of these ruptures determines the morphology of the resulting myriad of micro-bubbles. This fluid dynamics video is submitted to the APS DFD Galle…
▽ More
When a drop impacts at very low velocity onto a pool surface it is cushioned by a thin layer of air, which can be stretched into a hemispheric shape. We use ultra-high-speed video imaging to show how this thin air-layer ruptures. The number and locations of these ruptures determines the morphology of the resulting myriad of micro-bubbles. This fluid dynamics video is submitted to the APS DFD Gallery of Fluid Motion 2012, part of the 65th Annual Meeting of the American Physical Society's Division of Fluid Dynamics (18-20 November, San Diego, CA, USA).
△ Less
Submitted 14 October, 2012;
originally announced October 2012.
-
Bubble Rings Entrapment
Authors:
Marie-Jean Thoraval,
Sigurdur T. Thoroddsen,
Kohsei Takehara,
Takeharu Goji Etoh
Abstract:
We show how micro-bubble rings are entrapped under a drop impacting onto a pool surface. This fluid dynamics video is submitted to the APS DFD Gallery of Fluid Motion 2012, part of the 65th Annual Meeting of the American Physical Society's Division of Fluid Dynamics (18-20 November, San Diego, CA, USA).
We show how micro-bubble rings are entrapped under a drop impacting onto a pool surface. This fluid dynamics video is submitted to the APS DFD Gallery of Fluid Motion 2012, part of the 65th Annual Meeting of the American Physical Society's Division of Fluid Dynamics (18-20 November, San Diego, CA, USA).
△ Less
Submitted 14 October, 2012;
originally announced October 2012.
-
How to freeze drops with powder
Authors:
Jeremy Marston,
Ying Zhu,
Ivan Vakarelski,
Siggi Thoroddsen
Abstract:
This document accompanies fluid dyanmics video entry V83911 for APS DFD 2012 meeting. In this video, we present experiments on how drop oscillations can be "frozen" using hydrophobic powders.
This document accompanies fluid dyanmics video entry V83911 for APS DFD 2012 meeting. In this video, we present experiments on how drop oscillations can be "frozen" using hydrophobic powders.
△ Less
Submitted 14 October, 2012;
originally announced October 2012.
-
Von Kármán Vortex Street within an Impacting Drop
Authors:
Marie-Jean Thoraval,
Kohsei Takehara,
Takeharu Goji Etoh,
Stephane Popinet,
Pascal Ray,
Christophe Josserand,
Stephane Zaleski,
Sigurdur Thoroddsen
Abstract:
The splashing of a drop impacting onto a liquid pool produces a range of different sized micro-droplets. At high impact velocities, the most significant source of these droplets is a thin liquid jet emerging at the start of the impact from the neck that connects the drop to the pool. We use ultra-high-speed video imaging in combination with high-resolution numerical simulations to show how the eje…
▽ More
The splashing of a drop impacting onto a liquid pool produces a range of different sized micro-droplets. At high impact velocities, the most significant source of these droplets is a thin liquid jet emerging at the start of the impact from the neck that connects the drop to the pool. We use ultra-high-speed video imaging in combination with high-resolution numerical simulations to show how the ejecta gives way to irregular splashing. At higher Reynolds number, its base becomes unstable, shedding vortex rings into the liquid from the free surface in an axisymmetric von Kármán vortex street, thus breaking the ejecta sheet as it forms.
△ Less
Submitted 29 February, 2012;
originally announced February 2012.
