Showing 1–11 of 11 results for author: Thakur, S C

Transition of blue-core helicon discharge

Authors: L. Chang, S. J. Zhang, J. T. Wu, Y. W. Zhang, C. Wang, Y. Peng, S. S. Gao, C. J. Sun, Q. Wang, C. F. Sang, S. C. Thakur, S. Isayama, S. J. You

Abstract: This study explores the transitional characteristics of blue-core helicon discharge, which to our knowledge was not particularly focused on before. Parameters are measured on recently built advanced linear plasma device, i.e. Multiple Plasma Simulation Linear Device (MPS-LD) by various diagnostics including Langmuir probe, optical emission spectrometer, and standard high-speed camera. It is found… ▽ More This study explores the transitional characteristics of blue-core helicon discharge, which to our knowledge was not particularly focused on before. Parameters are measured on recently built advanced linear plasma device, i.e. Multiple Plasma Simulation Linear Device (MPS-LD) by various diagnostics including Langmuir probe, optical emission spectrometer, and standard high-speed camera. It is found that the jump direction of electron density (from low level to high level) is opposite to that of electron temperature (from high level to low level). Electron density increases significantly and the radial profile becomes localized near the axis when the blue-core transition occurs. With increased field strength, electron density increases whereas electron temperature drops. The radial profile of electron temperature looks like a ``W" shape, i.e. minimizing around the edge of blue-core column. Electron density increases with background pressure, while electron temperature peaks around certain pressure value. High-speed videos show that the plasma column oscillates radially and experiences azimuthal instabilities with high rate once entered blue-core mode. An electromagnetic solver (EMS) based on Maxwell's equations and a cold-plasma dielectric tensor is also employed to compute the wave field and power absorption during blue-core transition, to provide more details that are valuable for understanding the transitional physics but not yet available in experiment. The results show that wave field in both radial and axial directions changes significantly during the transition, its structure differs from antenna to downstream, and the power dependence of wave magnetic field is overall opposite to that of wave electric field. This work presents comprehensive characteristics of the transitional blue-core discharge and is important to both physics understanding and practical applications. △ Less

Submitted 27 August, 2025; originally announced August 2025.

The CHIMERAS Project: Design Framework for the Collisionless HIgh-beta Magnetized Experiment Researching Astrophysical Systems

Authors: S. Dorfman, S. Bose, E. Lichko, M. Abler, J. Juno, J. M. TenBarge, Y. Zhang, S. Chakraborty Thakur, C. A. Cartagena-Sanchez, P. Tatum, E. Scime, G. Joshi, S. Greess, C. Kuchta

Abstract: From the near-Earth solar wind to the intracluster medium of galaxy clusters, collisionless, high-beta, magnetized plasmas pervade our universe. Energy and momentum transport from large-scale fields and flows to small scale motions of plasma particles is ubiquitous in these systems, but a full picture of the underlying physical mechanisms remains elusive. The transfer is often mediated by a turbul… ▽ More From the near-Earth solar wind to the intracluster medium of galaxy clusters, collisionless, high-beta, magnetized plasmas pervade our universe. Energy and momentum transport from large-scale fields and flows to small scale motions of plasma particles is ubiquitous in these systems, but a full picture of the underlying physical mechanisms remains elusive. The transfer is often mediated by a turbulent cascade of Alfv{é}nic fluctuations as well as a variety of kinetic instabilities; these processes tend to be multi-scale and/or multi-dimensional, which makes them difficult to study using spacecraft missions and numerical simulations alone (Dorfman et al. 2023; Lichko et al. 2020, 2023). Meanwhile, existing laboratory devices struggle to produce the collisionless, high ion beta ($β_i \gtrsim 1$), magnetized plasmas across the range of scales necessary to address these problems. As envisioned in recent community planning documents (Carter et al. 2020; Milchberg and Scime 2020; Baalrud et al. 2020; Dorfman et al. 2023; National Academies of Sciences, Engineering, and Medicine 2024, it is therefore important to build a next generation laboratory facility to create a $β_i \gtrsim 1$, collisionless, magnetized plasma in the laboratory for the first time. A Working Group has been formed and is actively defining the necessary technical requirements to move the facility towards a construction-ready state. Recent progress includes the development of target parameters and diagnostic requirements as well as the identification of a need for source-target device geometry. As the working group is already leading to new synergies across the community, we anticipate a broad community of users funded by a variety of federal agencies (including NASA, DOE, and NSF) to make copious use of the future facility. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Comments: 18 pages, 1 figure

Electron magnetization effects on carbonaceous dusty nanoparticles grown in $Ar/C_2H_2$ capacitively coupled nonthermal plasma

Authors: Bhavesh Ramkorun, Saikat C. Thakur, Ryan B. Comes, Edward Thomas Jr

Abstract: Carbonaceous dusty nanoparticles spontaneously grow in nonthermal plasmas from a gas mixture of argon and acetylene. These particles levitate and grow within the bulk plasma for a duration known as the growth cycle ($T_c$), after which they gradually move away. In experiments operating at 500 milliTorr, the particles reach a maximum radius of approximately 250 nm for $T_c \sim$ 121 s. However, the… ▽ More Carbonaceous dusty nanoparticles spontaneously grow in nonthermal plasmas from a gas mixture of argon and acetylene. These particles levitate and grow within the bulk plasma for a duration known as the growth cycle ($T_c$), after which they gradually move away. In experiments operating at 500 milliTorr, the particles reach a maximum radius of approximately 250 nm for $T_c \sim$ 121 s. However, the introduction of weak magnetic fields reduces both the maximum radius and $T_c$. The modified electron Hall parameter ($H_e'$), which quantifies the degree of electron magnetization, increases linearly with the magnetic field strength, transitioning from unmagnetized electrons ($H_e' < 1$) to magnetized electrons ($H_e' > 1$). $T_c$ gradually decreases to around 40 s until $H_e' \sim 1$ at approximately 330 Gauss, after which it remains roughly constant for fields up to about 1020 Gauss. Additionally, with increasing magnetic field strength, the dust growth rate initially decreases to $H_e' \sim 1$, then increases slightly again. These results demonstrate that the onset of electron magnetization at can control the growth of nanoparticles from chemical precursors in nonthermal plasmas, which is relevant for industrial applications. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Experiments and modeling of dust particle heating resulting from changes in polarity switching in the PK-4 microgravity laboratory

Authors: Lori S. McCabe, Jeremiah Williams, Saikat Chakraborty Thakur, Uwe Konopka, Evdokiya Kostadinova, Mikhail Pustylnik, Hubertus Thomas, Markus Thoma, Edward Thomas

Abstract: In the presence of gravity, the micron-sized charged dust particles in a complex (dusty) plasma are compressed into thin layers. However, under the microgravity conditions of the Plasma Kristall-4 (PK-4) experiment on the International Space Station (ISS), the particles fill the plasma, allowing us to investigate the properties of a three-dimensional (3D) multi-particle system. This paper examines… ▽ More In the presence of gravity, the micron-sized charged dust particles in a complex (dusty) plasma are compressed into thin layers. However, under the microgravity conditions of the Plasma Kristall-4 (PK-4) experiment on the International Space Station (ISS), the particles fill the plasma, allowing us to investigate the properties of a three-dimensional (3D) multi-particle system. This paper examines the change in the spatial ordering and thermal state of the particle system created when dust particles are stopped by periodic oscillations of the electric field, known as polarity switching, in a dc glow discharge plasma. Data from the ISS is compared against experiments performed using a ground-based reference version of PK-4 and numerical simulations. Initial results show substantive differences in the velocity distribution functions between experiments on the ground and in microgravity. There are also differences in the motion of the dust cloud, in microgravity there is an expansion of the dust cloud at the application of polarity switching which is not seen in the ground-based experiments. It is proposed that the dust cloud in microgravity gains thermal energy at the application of polarity switching due to this expansion. Simulation results suggest that this may be due to a modification in the effective screening length of the dust at the onset of polarity switching, which arises from a configuration energy between the charged particles. Experimental measurements and simulations show that an extended time (much greater than the Epstein drag decay) is required to dissipate this energy. △ Less

Submitted 7 May, 2025; v1 submitted 21 January, 2025; originally announced January 2025.

Journal ref: Phys. Plasmas 1 May 2025; 32 (5): 053701

Comparing growth of titania and carbonaceous dusty nanoparticles in weakly magnetised capacitively coupled plasmas

Authors: Bhavesh Ramkorun, Gautam Chandrasekhar, Vijaya Rangari, Saikat C. Thakur, Ryan B. Comes, Edward Thomas Jr

Abstract: This study compares the growth cycles and spatial distribution of dust cloud for titania and carbonaceous dusty nanoparticles in capacitively coupled radiofrequency plasmas, with and without the presence of a weak magnetic field of approximately 500 Gauss. Findings on cycle time, growth rate, and spatial distribution of dust cloud are discussed. The growth of nanoparticles in these plasmas is cycl… ▽ More This study compares the growth cycles and spatial distribution of dust cloud for titania and carbonaceous dusty nanoparticles in capacitively coupled radiofrequency plasmas, with and without the presence of a weak magnetic field of approximately 500 Gauss. Findings on cycle time, growth rate, and spatial distribution of dust cloud are discussed. The growth of nanoparticles in these plasmas is cyclic, with particles reaching their maximum size and subsequently moving out of the plasma, followed by the generation of a new particle growth cycle. The presence of the magnetic field speeds up the growth cycle in both plasma. The magnetic field also makes the spatial distribution of the two dust cloud different from each other. Langmuir probe measurement of the background plasma parameters such as electron temperature and floating potential reveal radial variations in floating potential but not electron temperature. Furthermore, the magnetic field changes the radial variation of floating potential. These measurements, however, are not sufficient to explain why the two dust clouds appear differently. It is possible that the differences occur due to a gradient in the radial distribution of the magnetic field. △ Less

Submitted 17 July, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Introducing dusty plasma particle growth of nanospherical titanium dioxide

Authors: Bhavesh Ramkorun, Swapneal Jain, Adib Taba, Masoud Mahjouri-Samani, Michael E. Miller, Saikat C. Thakur, Edward Thomas Jr., Ryan B. Comes

Abstract: In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homoge… ▽ More In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homogeneous radius of 230 $\pm$ 17 nm after an elapsed time of 70 seconds. The particle grew linearly and the growth displayed a cyclic behavior; that is, upon reaching their maximum radius, the largest particles fell out of the plasma, and a new growth cycle immediately followed. The particles were collected after being grown for different amounts of time and imaged using scanning electron microscopy. Further characterization was carried out using energy dispersive X-ray spectroscopy, X-ray diffraction and Raman spectroscopy to elucidate the chemical composition and crystalline properties of the maximally sized particles. Initially, the as-grown particles after 70 seconds exhibited an amorphous structure. However, annealing treatments at temperatures of 400 $^\circ$C and 800 $^\circ$C induced crystallization, yielding anatase and rutile phases, respectively. Notably, annealing at 600 $^\circ$C resulted in a mixed phase of anatase and rutile. These findings open new avenues for a rapid and controlled growth technique of titanium dioxide as dusty plasma. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Comments: 8 pages, 5 figures

Journal ref: Appl. Phys. Lett. 124, 144102 (2024)

Workforce Development Through Research-Based, Plasma-Focused Activities

Authors: E G Kostadinova, Shannon Greco, Maajida Murdock, Ernesto Barraza-Valdez, Hannah R Hasson, Imani Z West-Abdallah, Cheryl A Harper, Katrina Brown, Earl Scime, Franklin Dollar, Carl Greninger, Bryan Stanley, Elizabeth Oxford, David Schaffner, Laura Provenzani, Chandra Breanne Curry, Claudia Fracchiolla, Shams El-Adawy, Saikat Chakraborty Thakur, Dmitri Orlov, Caroline Anderson

Abstract: This report is a summary of the mini-conference Workforce Development Through Research-Based, Plasma-Focused Science Education and Public Engagement held during the 2022 American Physical Society Division of Plasma Physics (APS DPP) annual meeting. The motivation for organizing this mini-conference originates from recent studies and community-based reports highlighting important issues with the cu… ▽ More This report is a summary of the mini-conference Workforce Development Through Research-Based, Plasma-Focused Science Education and Public Engagement held during the 2022 American Physical Society Division of Plasma Physics (APS DPP) annual meeting. The motivation for organizing this mini-conference originates from recent studies and community-based reports highlighting important issues with the current state of the plasma workforce. Here we summarize the main findings presented in the two speaker sessions of the mini-conference, the challenges and recommendations identified in the discussion sessions, and the results from a post-conference survey. We further provide information on initiatives and studies presented at the mini-conference, along with references to further resources. △ Less

Submitted 2 April, 2023; v1 submitted 11 March, 2023; originally announced March 2023.

Comments: 15 pages, 4 figures

Wave propagation and power deposition in blue-core helicon plasma

Authors: Lei Chang, Juan F. Caneses, Saikat C. Thakur, Huai-Qing Zhang

Abstract: The wave propagation and power deposition in blue-core helicon plasma are computed referring to recent experiments. It is found that the radial profile of wave electric field peaks off-axis during the blue-core formation, and the location of this peak is very close to that of particle transport barrier observed in experiment; the radial profile of wave magnetic field shows multiple radial modes in… ▽ More The wave propagation and power deposition in blue-core helicon plasma are computed referring to recent experiments. It is found that the radial profile of wave electric field peaks off-axis during the blue-core formation, and the location of this peak is very close to that of particle transport barrier observed in experiment; the radial profile of wave magnetic field shows multiple radial modes inside the blue-core column, which is consistent with the experimental observation of coherent high $m$ modes through Bessel function. The axial profiles of wave field indicate that, once the blue-core mode has been achieved, waves can only propagate inside the formed column with distinct phase compared to that outside. The wave energy distribution shows a clear and sharp boundary at the edge of blue-core column, besides which periodic structures are observed and the axial periodicity inside is nearly twice that outside. The dispersion relation inside the blue-core column exhibits multiple modes, a feature of resonant cavity that selects different modes during frequency variation, while the dispersion relation outside gives constant wave number with changed frequency. The power deposition appears to be off-axis in the radial direction and periodic in the axial direction, and mostly inside the blue-core column. Analyses based on step-like function theory and introduced blue-core constant provide consistent results. The equivalence of blue-core column to optical fiber for electromagnetic communication is also explored and inspires a novel application of helicon plasma, which may be one of the most interesting findings of present work. △ Less

Submitted 24 March, 2022; originally announced March 2022.

Ion heating in the PISCES-RF liquid-cooled high-power, steady-state, helicon plasma device

Authors: S. Chakraborty Thakur, M. Paul, E. M. Hollmann, E. Lister, E. E. Scime, S. Sadhu, T. E. Steinberger, G. R. Tynan

Abstract: Radio Frequency (RF) driven helicon plasma sources are commonly used for their ability to produce high-density argon plasmas (n > 10^19/m^3) at relatively moderate powers (typical RF power < 2 kW). Typical electron temperatures are < 10 eV and typical ion temperatures are < 0.6 eV. A newly designed helicon antenna assembly (with concentric, double-layered, fully liquid-cooled RF-transparent window… ▽ More Radio Frequency (RF) driven helicon plasma sources are commonly used for their ability to produce high-density argon plasmas (n > 10^19/m^3) at relatively moderate powers (typical RF power < 2 kW). Typical electron temperatures are < 10 eV and typical ion temperatures are < 0.6 eV. A newly designed helicon antenna assembly (with concentric, double-layered, fully liquid-cooled RF-transparent windows) operates in steady-state at RF powers up to 10 kW. We report on the dependence of argon plasma density, electron temperature and ion temperature on RF power. At 10 kW, ion temperatures > 2 eV in argon plasmas are measured with laser induced fluorescence, which is consistent with a simple volume averaged 0-D power balance model. 1-D Monte Carlo simulations of the neutral density profile for these plasma conditions show strong neutral depletion near the core and predict neutral temperatures well above room temperatures. The plasmas created in this high-power helicon source (when light ions are employed) are ideally suited for fusion divertor plasma-material interaction studies and negative ion production for neutral beams. △ Less

Submitted 29 December, 2020; originally announced December 2020.

Comments: 12 pages, 19 figues

PISCES-RF: a liquid-cooled high-power steady-state helicon plasma device

Authors: Saikat Chakraborty Thakur, Michael J. Simmonds, Juan F. Caneses, Fengjen Chang, Eric M. Hollmann Russell P. Doerner, Richard Goulding, Arnold Lumsdaine, Juergen Rapp, George R. Tynan

Abstract: Radio-frequency (RF) driven helicon plasma sources can produce relatively high-density plasmas (n > 10^19 m-3) at relatively moderate powers (< 2 kW) in argon. However, to produce similar high-density plasmas for fusion relevant gases such as hydrogen, deuterium and helium, much higher RF powers are needed. For very high RF powers, thermal issues of the RF-transparent dielectric window, used in th… ▽ More Radio-frequency (RF) driven helicon plasma sources can produce relatively high-density plasmas (n > 10^19 m-3) at relatively moderate powers (< 2 kW) in argon. However, to produce similar high-density plasmas for fusion relevant gases such as hydrogen, deuterium and helium, much higher RF powers are needed. For very high RF powers, thermal issues of the RF-transparent dielectric window, used in the RF source design, limit the plasma operation timescales. To mitigate this constraint, we have designed, built and tested a novel liquid-cooled RF window which allows steady state operations at high power (up to 20 kW). De-ionized (DI) water, flowing between two concentric dielectric RF windows, is used as the coolant. We show that a full azimuthal blanket of DI water does not degrade plasma production. We obtain steady-state, high-density plasmas (n > 10^19 m-3, T_e ~ 5 eV) using both argon and hydrogen. From calorimetry on the DI water, we measure the net heat that is being removed by the coolant at steady state conditions. Using infra-red (IR) imaging, we calculate the constant plasma heat deposition and measure the final steady state temperature distribution patterns on the inner surface of the ceramic layer. We find that the heat deposition pattern follows the helical shape of the antenna. We also show the consistency between the heat absorbed by the DI water, as measured by calorimetry, and the total heat due to the combined effect of the plasma heating and the absorbed RF. These results are being used to answer critical engineering questions for the 200 kW RF device (MPEX: Materials Plasma Exposure eXperiment) being designed at the Oak Ridge National Laboratory (ORNL) as a next generation plasma material interaction (PMI) device. △ Less

Submitted 29 December, 2020; v1 submitted 22 May, 2020; originally announced May 2020.

Comments: 13 pages, 22 figures

Tracing the Pathway from Drift-Wave Turbulence with Broken Symmetry to the Generation of Sheared Axial Mean Flow

Authors: R. Hong, J. C. Li, R. Hajjar, S. C. Thakur, P. H. Diamond, G. R. Tynan

Abstract: This study traces the emergence of sheared axial flow from collisional drift wave turbulence with broken symmetry in a linear plasma device---CSDX. As the density profile steepens, the axial Reynolds stress develops and drives a radially sheared axial flow that is parallel to the magnetic field. Results show that the non-diffusive piece of the Reynolds stress is driven by the density gradient and… ▽ More This study traces the emergence of sheared axial flow from collisional drift wave turbulence with broken symmetry in a linear plasma device---CSDX. As the density profile steepens, the axial Reynolds stress develops and drives a radially sheared axial flow that is parallel to the magnetic field. Results show that the non-diffusive piece of the Reynolds stress is driven by the density gradient and results from the spectral asymmetry of the turbulence and thus is dynamical in origin. Taken together, these findings constitute the first simultaneous demonstration of the causal link between the density gradient, turbulence and stress with broken spectral symmetry, and the mean axial flow. △ Less

Submitted 17 May, 2018; v1 submitted 27 February, 2018; originally announced February 2018.

Journal ref: Phys. Rev. Lett. 120, 205001 (2018); https://doi.org/10.1103/PhysRevLett.120.205001