-
Entanglement witness for combined atom interferometer-mechanical oscillator setup
Authors:
Gayathrini Premawardhana,
Deven P. Bowman,
Jacob M. Taylor
Abstract:
We investigate how to entangle an atom interferometer and a macroscopic mechanical oscillator in order to create non-classical states of the oscillator. We propose an entanglement witness, from whose violation, the generation of entanglement can be determined. We do this for both the noiseless case and when including thermal noise. Thermal noise can arise from two sources: the first being when the…
▽ More
We investigate how to entangle an atom interferometer and a macroscopic mechanical oscillator in order to create non-classical states of the oscillator. We propose an entanglement witness, from whose violation, the generation of entanglement can be determined. We do this for both the noiseless case and when including thermal noise. Thermal noise can arise from two sources: the first being when the oscillator starts in a thermal state, and the second when a continuous thermal bath is in contact with the oscillator. We find that for the appropriate oscillator quality factor $Q$, violation always exists for any value of magnetic coupling $λ$ and thermal occupancy $\bar n$. Cooling the oscillator to its ground state provides an $O(\bar n)$ improvement in the EW violation than starting in a thermal state. However, this still requires at least 10$^{5}$ measurements to be determined. We then consider how to use magnetic interactions to realize this idea.
△ Less
Submitted 12 March, 2025;
originally announced March 2025.
-
Feasibility of a trapped atom interferometer with accelerating optical traps
Authors:
Gayathrini Premawardhana,
Jonathan Kunjummen,
Sarthak Subhankar,
Jacob M. Taylor
Abstract:
In order to increase the measured phase of an atom interferometer and improve its sensitivity, researchers attempt to increase the enclosed space-time area using two methods: creating larger separations between the interferometer arms and having longer evolution times. However, increasing the evolution time reduces the bandwidth that can be sampled, whereas decreasing the evolution time worsens th…
▽ More
In order to increase the measured phase of an atom interferometer and improve its sensitivity, researchers attempt to increase the enclosed space-time area using two methods: creating larger separations between the interferometer arms and having longer evolution times. However, increasing the evolution time reduces the bandwidth that can be sampled, whereas decreasing the evolution time worsens the sensitivity. In this paper, we attempt to address this by proposing a setup for high-bandwidth applications, with improved overall sensitivity. This is realized by accelerating and holding the atoms using optical dipole traps. We find that accelerations of up to $10^{3}$-$10^{5}$ m/s$^2$ can be achieved using acousto-optic deflectors (AODs) to move the traps. By comparing the sensitivity of our approach to acceleration as a baseline to traditional atom interferometry, we find a substantial improvement to the state of the art. In the limit of appropriate beam and optics stabilization, sensitivities approaching 10$^{-14}$ (m/s$^2$)/$\sqrt{\rm Hz}$ may be achievable at 1 Hz, while detection at 1 kHz with a sensitivity an order of magnitude better than traditional free-fall atom interferometers is possible with today's systems.
△ Less
Submitted 26 June, 2024; v1 submitted 23 August, 2023;
originally announced August 2023.
-
Photon-efficient optical tweezers via wavefront shaping
Authors:
Unė G. Būtaitė,
Christina Sharp,
Michael Horodynski,
Graham M. Gibson,
Miles J. Padgett,
Stefan Rotter,
Jonathan M. Taylor,
David B. Phillips
Abstract:
Optical tweezers enable non-contact trapping of micro-scale objects using light. Despite their widespread use, it is currently not known how tightly it is possible to three-dimensionally trap micro-particles with a given photon budget. Reaching this elusive limit would enable maximally-stiff particle trapping for precision measurements on the nanoscale, and photon-efficient tweezing of light-sensi…
▽ More
Optical tweezers enable non-contact trapping of micro-scale objects using light. Despite their widespread use, it is currently not known how tightly it is possible to three-dimensionally trap micro-particles with a given photon budget. Reaching this elusive limit would enable maximally-stiff particle trapping for precision measurements on the nanoscale, and photon-efficient tweezing of light-sensitive objects. Here we solve this problem by customising a trapping light field to suit a specific particle, with the aim of simultaneously optimising trap stiffness in all three dimensions. Initially taking a theoretical approach, we develop an efficient multi-parameter optimisation routine to design bespoke optical traps for a wide range of micro-particles. We show that the confinement volume of micro-spheres held in these sculpted traps can be reduced by one-to-two orders-of-magnitude in comparison to a conventional optical tweezer of the same power. We go on to conduct proof-of-principle experiments, and use a wavefront shaping inspired strategy to suppress the Brownian fluctuations of optically trapped micro-spheres in every direction concurrently, thus demonstrating order-of-magnitude reductions in their confinement volumes. Our work paves the way towards the fundamental limits of optical control over the mesoscopic realm.
△ Less
Submitted 25 April, 2023;
originally announced April 2023.
-
Collision-resolved pressure sensing
Authors:
Daniel S. Barker,
Daniel Carney,
Thomas W. LeBrun,
David C. Moore,
Jacob M. Taylor
Abstract:
Heat and pressure are ultimately transmitted via quantized degrees of freedom, like gas particles and phonons. While a continuous Brownian description of these noise sources is adequate to model measurements with relatively long integration times, sufficiently precise measurements can resolve the detailed time dependence coming from individual bath-system interactions. We propose the use of nanome…
▽ More
Heat and pressure are ultimately transmitted via quantized degrees of freedom, like gas particles and phonons. While a continuous Brownian description of these noise sources is adequate to model measurements with relatively long integration times, sufficiently precise measurements can resolve the detailed time dependence coming from individual bath-system interactions. We propose the use of nanomechanical devices operated with impulse readout sensitivity around the ``standard quantum limit'' to sense ultra-low gas pressures by directly counting the individual collisions of gas particles on a sensor. We illustrate this in two paradigmatic model systems: an optically levitated nanobead and a tethered membrane system in a phononic bandgap shield.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
A perspective on the current state-of-the-art of quantum computing for drug discovery applications
Authors:
Nick S. Blunt,
Joan Camps,
Ophelia Crawford,
Róbert Izsák,
Sebastian Leontica,
Arjun Mirani,
Alexandra E. Moylett,
Sam A. Scivier,
Christoph Sünderhauf,
Patrick Schopf,
Jacob M. Taylor,
Nicole Holzmann
Abstract:
Computational chemistry is an essential tool in the pharmaceutical industry. Quantum computing is a fast evolving technology that promises to completely shift the computational capabilities in many areas of chemical research by bringing into reach currently impossible calculations. This perspective illustrates the near-future applicability of quantum computation to pharmaceutical problems. We brie…
▽ More
Computational chemistry is an essential tool in the pharmaceutical industry. Quantum computing is a fast evolving technology that promises to completely shift the computational capabilities in many areas of chemical research by bringing into reach currently impossible calculations. This perspective illustrates the near-future applicability of quantum computation to pharmaceutical problems. We briefly summarize and compare the scaling properties of state-of-the-art quantum algorithms, and provide novel estimates of the quantum computational cost of simulating progressively larger embedding regions of a pharmaceutically relevant covalent protein-drug complex involving the drug Ibrutinib. Carrying out these calculations requires an error-corrected quantum architecture, that we describe. Our estimates showcase that recent developments on quantum algorithms have dramatically reduced the quantum resources needed to run fully quantum calculations in active spaces of around 50 orbitals and electrons, from estimated over 1000 years using the Trotterisation approach to just a few days with sparse qubitisation, painting a picture of fast and exciting progress in this nascent field.
△ Less
Submitted 20 March, 2023; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Decoherence from Long-Range Forces in Atom Interferometry
Authors:
Jonathan Kunjummen,
Daniel Carney,
Jacob M. Taylor
Abstract:
Atom interferometers provide a powerful means of realizing quantum coherent systems with increasingly macroscopic extent in space and time. These systems provide an opportunity for a variety of novel tests of fundamental physics, including ultralight dark matter searches and tests of modifications of gravity, using long drop times, microgravity. However, as experiments operate with longer periods…
▽ More
Atom interferometers provide a powerful means of realizing quantum coherent systems with increasingly macroscopic extent in space and time. These systems provide an opportunity for a variety of novel tests of fundamental physics, including ultralight dark matter searches and tests of modifications of gravity, using long drop times, microgravity. However, as experiments operate with longer periods of free fall and become sensitive to smaller background effects, key questions start to emerge about the fundamental limits to future atom interferometery experiments. We study the effects on atomic coherence from hard-to-screen backgrounds due to baths of ambient particles with long-range forces, such as gravitating baths and charged cosmic rays. Our approach - working in the Heisenberg picture for the atomic motion - makes proper inclusion of the experimental apparatus feasible and clearly shows how to handle long-range forces and preferred frame ambiguities. We find that these potential backgrounds are likely negligible for the next generation of interferometers, as aggressive estimates for the gravitational decoherence from a background bath of dark matter particles gives a decoherence timescale on the order of years.
△ Less
Submitted 11 April, 2023; v1 submitted 6 May, 2022;
originally announced May 2022.
-
Mechanical Quantum Sensing in the Search for Dark Matter
Authors:
Daniel Carney,
Gordan Krnjaic,
David C. Moore,
Cindy A. Regal,
Gadi Afek,
Sunil Bhave,
Benjamin Brubaker,
Thomas Corbitt,
Jonathan Cripe,
Nicole Crisosto,
Andrew Geraci,
Sohitri Ghosh,
Jack G. E. Harris,
Anson Hook,
Edward W. Kolb,
Jonathan Kunjummen,
Rafael F. Lang,
Tongcang Li,
Tongyan Lin,
Zhen Liu,
Joseph Lykken,
Lorenzo Magrini,
Jack Manley,
Nobuyuki Matsumoto,
Alissa Monte
, et al. (10 additional authors not shown)
Abstract:
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mecha…
▽ More
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Bose Condensation of Photons Thermalized via Laser Cooling of Atoms
Authors:
Chiao-Hsuan Wang,
M. J. Gullans,
J. V. Porto,
William D. Phillips,
Jacob M. Taylor
Abstract:
A Bose-Einstein condensate (BEC) is a quantum phase of matter achieved at low temperatures. Photons, one of the most prominent species of bosons, do not typically condense due to the lack of a particle number-conservation. We recently described a photon thermalization mechanism which gives rise to a grand canonical ensemble of light with effective photon number conservation between a subsystem and…
▽ More
A Bose-Einstein condensate (BEC) is a quantum phase of matter achieved at low temperatures. Photons, one of the most prominent species of bosons, do not typically condense due to the lack of a particle number-conservation. We recently described a photon thermalization mechanism which gives rise to a grand canonical ensemble of light with effective photon number conservation between a subsystem and a particle reservoir. This mechanism occurs during Doppler laser cooling of atoms where the atoms serve as a temperature reservoir while the cooling laser photons serve as a particle reservoir. Here we address the question of the possibility of a BEC of photons in this laser cooling photon thermalization scenario and theoretically demonstrate that a Bose condensation of photons can be realized by cooling an ensemble of two-level atoms (realizable with alkaline earth atoms) inside a Fabry-Perot cavity.
△ Less
Submitted 20 September, 2018;
originally announced September 2018.
-
Multi-purpose SLM-light-sheet microscope
Authors:
Chiara Garbellotto,
Jonathan M. Taylor
Abstract:
By integrating a phase-only Spatial Light Modulator (SLM) into the illumination arm of a cylindrical-lens-based Selective Plane Illumination Microscope (SPIM), we have created a versatile system able to deliver high quality images by operating in a wide variety of different imaging modalities. When placed in a Fourier plane, the SLM permits modulation of the microscope's light-sheet to implement i…
▽ More
By integrating a phase-only Spatial Light Modulator (SLM) into the illumination arm of a cylindrical-lens-based Selective Plane Illumination Microscope (SPIM), we have created a versatile system able to deliver high quality images by operating in a wide variety of different imaging modalities. When placed in a Fourier plane, the SLM permits modulation of the microscope's light-sheet to implement imaging techniques such as structured illumination, tiling, pivoting, autofocusing and pencil beam scanning. Previous publications on dedicated microscope setups have shown how these techniques can deliver improved image quality by rejecting out-offocus light (structured illumination and pencil beam scanning), reducing shadowing (light-sheet pivoting), and obtaining a more uniform illumination by moving the highest-resolution region of the light-sheet across the imaging Field of View (tiling). Our SLM-SPIM configuration is easy to build and use, and has been designed to allow all of these techniques to be employed on one optical setup compatible with the OpenSPIM design. It also offers the possibility to choose between three different light-sheets, in thickness and height, which can be selected according to the characteristics of the sample and the imaging technique to be applied. We demonstrate the flexibility and performance of the system with results obtained by applying a variety of different imaging techniques on samples of fluorescent beads, Zebrafish embryos, and optically cleared whole mouse brain samples. Thus our approach allows easy implementation of advanced imaging techniques while retaining the simplicity of a cylindrical-lens-based light-sheet microscope.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
High-speed extended-volume blood flow measurement using engineered point-spread function
Authors:
Yongzhuang Zhou,
Vytautas Zickus,
Paul Zammit,
Jonathan M. Taylor,
Andrew R. Harvey
Abstract:
Experimental characterization of blood flow in living organisms is crucial for understanding the development and function of cardiovascular systems, but there have been no techniques reported for snapshot imaging of thick samples in large volumes with high precision. We have combined computational microscopy and the diffraction-free, self-bending property of Airy beams to track fluorescent beads w…
▽ More
Experimental characterization of blood flow in living organisms is crucial for understanding the development and function of cardiovascular systems, but there have been no techniques reported for snapshot imaging of thick samples in large volumes with high precision. We have combined computational microscopy and the diffraction-free, self-bending property of Airy beams to track fluorescent beads with sub-micron precision through an extended axial range (up to 600 $μ$m) within the flowing blood of 3 days post-fertilization (dpf) zebrafish embryos. The spatial trajectories of the tracer beads within flowing blood were recorded during transit through both cardinal and intersegmental vessels, and the trajectories were found to be consistent with the segmentation of the vasculature recorded using selective-plane illumination microscopy (SPIM). This method provides precise spatial and temporal measurement of 3D blood flow with potential for enhanced understanding of fundamental dynamics, such as measurement of wall shear stress or of cardiovascular disease.
△ Less
Submitted 3 July, 2018;
originally announced July 2018.
-
Parallelized aperture synthesis using multi-aperture Fourier ptychographic microscopy
Authors:
Pavan Chandra Konda,
Jonathan M. Taylor,
Andrew R. Harvey
Abstract:
We report a novel microscopy platform, termed Multi-Aperture Fourier ptychographic microscopy (MA-FPM), capable of realizing gigapixel complex field images with large data acquisition bandwidths - in gigapixels per second. MA-FPM is a synthetic aperture technique- an array of objectives together with tilt-shift illumination are used to synthesize high-resolution, wide field-of-view images. Here, t…
▽ More
We report a novel microscopy platform, termed Multi-Aperture Fourier ptychographic microscopy (MA-FPM), capable of realizing gigapixel complex field images with large data acquisition bandwidths - in gigapixels per second. MA-FPM is a synthetic aperture technique- an array of objectives together with tilt-shift illumination are used to synthesize high-resolution, wide field-of-view images. Here, the phase is recovered using Fourier ptychography (FP) algorithms, unlike conventional optical synthetic aperture techniques where holographic measurements are used. The parallel data-acquisition capability due to multiple objectives provides unprecedented bandwidth enabling imaging of high-speed in vitro processes over extended depth-of-field. Here, we present a proof-of-concept experiment demonstrating high-quality imaging performance despite using nine-fold fewer illumination angles compared to an equivalent FP setup. Calibration procedures and reconstruction algorithm were developed to address the challenges of multiple imaging systems. Our technique provides a new imaging tool to study cell cultures, offering new insights into these processes.
△ Less
Submitted 6 June, 2018;
originally announced June 2018.
-
Dynamic suppression of Rayleigh light scattering in dielectric resonators
Authors:
Seunghwi Kim,
Jacob M. Taylor,
Gaurav Bahl
Abstract:
The ultimate limits of performance for any classical optical system are set by sub-wavelength fluctuations within the host material, that may be frozen-in or even dynamically induced. The most common manifestation of such sub-wavelength disorder is Rayleigh light scattering, which is observed in nearly all wave-guiding technologies today and can lead to both irreversible radiative losses as well a…
▽ More
The ultimate limits of performance for any classical optical system are set by sub-wavelength fluctuations within the host material, that may be frozen-in or even dynamically induced. The most common manifestation of such sub-wavelength disorder is Rayleigh light scattering, which is observed in nearly all wave-guiding technologies today and can lead to both irreversible radiative losses as well as undesirable intermodal coupling. While it has been shown that backscattering from disorder can be suppressed by breaking time-reversal symmetry in magneto-optic and topological insulator materials, common optical dielectrics possess neither of these properties. Here we demonstrate an optomechanical approach for dynamically suppressing Rayleigh backscattering within dielectric resonators. We achieve this by locally breaking time-reversal symmetry in a silica resonator through a Brillouin scattering interaction that is available in all materials. Near-complete suppression of Rayleigh backscattering is experimentally confirmed through three independent measurements -- the reduction of the back-reflections caused by scatterers, the elimination of a commonly seen normal-mode splitting effect, and by measurement of the reduction in intrinsic optical loss. More broadly, our results provide new evidence that it is possible to dynamically suppress Rayleigh backscattering within any optical dielectric medium, for achieving robust light propagation in nanophotonic devices in spite of the presence of scatterers or defects.
△ Less
Submitted 14 March, 2018; v1 submitted 6 March, 2018;
originally announced March 2018.
-
Electro-optomechanical equivalent circuits for quantum transduction
Authors:
Emil Zeuthen,
Albert Schliesser,
Jacob M. Taylor,
Anders S. Sørensen
Abstract:
Using the techniques of optomechanics, a high-$Q$ mechanical oscillator may serve as a link between electromagnetic modes of vastly different frequencies. This approach has successfully been exploited for the frequency conversion of classical signals and has the potential of performing quantum state transfer between superconducting circuitry and a traveling optical signal. Such transducers are oft…
▽ More
Using the techniques of optomechanics, a high-$Q$ mechanical oscillator may serve as a link between electromagnetic modes of vastly different frequencies. This approach has successfully been exploited for the frequency conversion of classical signals and has the potential of performing quantum state transfer between superconducting circuitry and a traveling optical signal. Such transducers are often operated in a linear regime, where the hybrid system can be described using linear response theory based on the Heisenberg-Langevin equations. While mathematically straightforward to solve, this approach yields little intuition about the dynamics of the hybrid system to aid the optimization of the transducer. As an analysis and design tool for such electro-optomechanical transducers, we introduce an equivalent circuit formalism, where the entire transducer is represented by an electrical circuit. Thereby we integrate the transduction functionality of optomechanical systems into the toolbox of electrical engineering allowing the use of its well-established design techniques. This unifying impedance description can be applied both for static (DC) and harmonically varying (AC) drive fields, accommodates arbitrary linear circuits, and is not restricted to the resolved-sideband regime. Furthermore, by establishing the quantized input-output formalism for the equivalent circuit, we obtain the scattering matrix for linear transducers using circuit analysis, and thereby have a complete quantum mechanical characterization of the transducer. Hence, this mapping of the entire transducer to the language of electrical engineering both sheds light on how the transducer performs and can at the same time be used to optimize its performance by aiding the design of a suitable electrical circuit.
△ Less
Submitted 14 June, 2018; v1 submitted 27 October, 2017;
originally announced October 2017.
-
Efimov States of Strongly Interacting Photons
Authors:
M. J. Gullans,
S. Diehl,
S. T. Rittenhouse,
B. P. Ruzic,
J. P. D'Incao,
P. Julienne,
A. V. Gorshkov,
J. M. Taylor
Abstract:
We demonstrate the emergence of universal Efimov physics for interacting photons in cold gases of Rydberg atoms. We consider the behavior of three photons injected into the gas in their propagating frame, where a paraxial approximation allows us to consider them as massive particles. In contrast to atoms and nuclei, the photons have a large anisotropy between their longitudinal mass, arising from…
▽ More
We demonstrate the emergence of universal Efimov physics for interacting photons in cold gases of Rydberg atoms. We consider the behavior of three photons injected into the gas in their propagating frame, where a paraxial approximation allows us to consider them as massive particles. In contrast to atoms and nuclei, the photons have a large anisotropy between their longitudinal mass, arising from dispersion, and their transverse mass, arising from diffraction. Nevertheless, we show that in suitably rescaled coordinates the effective interactions become dominated by s-wave scattering near threshold and, as a result, give rise to an Efimov effect near unitarity. We show that the three-body loss of these Efimov trimers can be strongly suppressed and determine conditions under which these states are observable in current experiments. These effects can be naturally extended to probe few-body universality beyond three bodies, as well as the role of Efimov physics in the non-equilbrium, many-body regime.
△ Less
Submitted 28 September, 2017; v1 submitted 6 September, 2017;
originally announced September 2017.
-
Thermodynamic limits for optomechanical systems with conservative potentials
Authors:
Stephen Ragole,
Haitan Xu,
John Lawall,
Jacob M. Taylor
Abstract:
The mechanical force from light -- radiation pressure -- provides an intrinsic nonlinear interaction. Consequently, optomechanical systems near their steady state, such as the canonical optical spring, can display non-analytic behavior as a function of external parameters. This non-analyticity, a key feature of thermodynamic phase transitions, suggests that there could be an effective thermodynami…
▽ More
The mechanical force from light -- radiation pressure -- provides an intrinsic nonlinear interaction. Consequently, optomechanical systems near their steady state, such as the canonical optical spring, can display non-analytic behavior as a function of external parameters. This non-analyticity, a key feature of thermodynamic phase transitions, suggests that there could be an effective thermodynamic description of optomechanical systems. Here we explicitly define the thermodynamic limit for optomechanical systems and derive a set of sufficient constraints on the system parameters as the mechanical system grows large. As an example, we show how these constraints can be satisfied in a system with $\mathbb{Z}_2$ symmetry and derive a free energy, allowing us to characterize this as an equilibrium phase transition.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
Optomechanical approach to controlling the temperature and chemical potential of light
Authors:
Chiao-Hsuan Wang,
Jacob M. Taylor
Abstract:
Massless particles, including photons, are not governed by particle conservation law during their typical interaction with matter even at low energies, and thus have no chemical potential. However, in driven systems, near equilibrium dynamics can lead to equilibration of photons with a finite number, describable using an effective chemical potential [M. Hafezi et al., Phys. Rev. B 92, 174305 (2015…
▽ More
Massless particles, including photons, are not governed by particle conservation law during their typical interaction with matter even at low energies, and thus have no chemical potential. However, in driven systems, near equilibrium dynamics can lead to equilibration of photons with a finite number, describable using an effective chemical potential [M. Hafezi et al., Phys. Rev. B 92, 174305 (2015)]. Here we build upon this general concept with an implementation appropriate for a photon-based quantum simulator. We consider how laser cooling of a well-isolated mechanical mode can provide an effective low-frequency bath for the quantum simulator system. We show that the use of auxiliary photon modes, coupled by the mechanical system, enables control of both the chemical potential and temperature of the resulting photonic quantum simulator's grand canonical ensemble.
△ Less
Submitted 18 May, 2018; v1 submitted 2 June, 2017;
originally announced June 2017.
-
Electro-mechano-optical detection of nuclear magnetic resonance
Authors:
Kazuyuki Takeda,
Kentaro Nagasaka,
Atsushi Noguchi,
Rekishu Yamazaki,
Yasunobu Nakamura,
Eiji Iwase,
Jacob M. Taylor,
Koji Usami
Abstract:
Signal reception of nuclear magnetic resonance (NMR) usually relies on electrical amplification of the electromotive force caused by nuclear induction. Here, we report up-conversion of a radio-frequency NMR signal to an optical regime using a high-stress silicon nitride membrane that interfaces the electrical detection circuit and an optical cavity through the electro-mechanical and the opto-mecha…
▽ More
Signal reception of nuclear magnetic resonance (NMR) usually relies on electrical amplification of the electromotive force caused by nuclear induction. Here, we report up-conversion of a radio-frequency NMR signal to an optical regime using a high-stress silicon nitride membrane that interfaces the electrical detection circuit and an optical cavity through the electro-mechanical and the opto-mechanical couplings. This enables optical NMR detection without sacrificing the versatility of the traditional nuclear induction approach. While the signal-to-noise ratio is currently limited by the Brownian motion of the membrane as well as additional technical noise, we find it can exceed that of the conventional electrical schemes by increasing the electro-mechanical coupling strength. The electro-mechano-optical NMR detection presented here opens the possibility of mechanical parametric amplification of NMR signals. Moreover, it can potentially be combined with the laser cooling technique applied to nuclear spins.
△ Less
Submitted 7 February, 2018; v1 submitted 1 June, 2017;
originally announced June 2017.
-
High-Order Multipole Radiation from Quantum Hall States in Dirac Materials
Authors:
Michael J. Gullans,
Jacob M. Taylor,
Atac Imamoglu,
Pouyan Ghaemi,
Mohammad Hafezi
Abstract:
We investigate the optical response of strongly disordered quantum Hall states in two-dimensional Dirac materials and find qualitatively different effects in the radiation properties of the bulk versus the edge. We show that the far-field radiation from the edge is characterized by large multipole moments (> 50) due to the efficient transfer of angular momentum from the electrons into the scattere…
▽ More
We investigate the optical response of strongly disordered quantum Hall states in two-dimensional Dirac materials and find qualitatively different effects in the radiation properties of the bulk versus the edge. We show that the far-field radiation from the edge is characterized by large multipole moments (> 50) due to the efficient transfer of angular momentum from the electrons into the scattered light. The maximum multipole transition moment is a direct measure of the coherence length of the edge states. Accessing these multipole transitions would provide new tools for optical spectroscopy and control of quantum Hall edge states. On the other hand, the far-field radiation from the bulk appears as random dipole emission with spectral properties that vary with the local disorder potential. We determine the conditions under which this bulk radiation can be used to image the disorder landscape. Such optical measurements can probe sub-micron length scales over large areas and provide complementary information to scanning probe techniques. Spatially resolving this bulk radiation would serve as a novel probe of the percolation transition near half-filling.
△ Less
Submitted 23 June, 2017; v1 submitted 12 January, 2017;
originally announced January 2017.
-
Optomechanically-induced chiral transport of phonons in one dimension
Authors:
Xunnong Xu,
Jacob M. Taylor
Abstract:
Non-reciprocal devices, with one-way transport properties, form a key component for isolating and controlling light in photonic systems. Optomechanical systems have emerged as a potential platform for optical non-reciprocity, due to ability of a pump laser to break time and parity symmetry in the system. Here we consider how the non-reciprocal behavior of light can also impact the transport of sou…
▽ More
Non-reciprocal devices, with one-way transport properties, form a key component for isolating and controlling light in photonic systems. Optomechanical systems have emerged as a potential platform for optical non-reciprocity, due to ability of a pump laser to break time and parity symmetry in the system. Here we consider how the non-reciprocal behavior of light can also impact the transport of sound in optomechanical devices. We focus on the case of a quasi one dimensional optical ring resonator with many mechanical modes coupled to light via the acousto-optic effect. The addition of disorder leads to finite diffusion for phonon transport in the material, largely due to elastic backscattering between clockwise and counter-clockwise phonons. We show that a laser pump field, along with the assumption of high quality-factor, sideband-resolved optical resonances, suppresses the effects of disorder and leads to the emergence of chiral diffusion, with direction-dependent diffusion emerging in a bandwidth similar to the phase-matching bandwidth for Brillouin scattering. A simple diagrammatic theory connects the observation of reduced mechanical linewidths directly to the associated phonon diffusion properties, and helps explain recent experimental results.
△ Less
Submitted 10 January, 2017;
originally announced January 2017.
-
A quasi-mode theory of chiral phonons
Authors:
Xunnong Xu,
Seunghwi Kim,
Gaurav Bahl,
Jacob M. Taylor
Abstract:
The coherence properties of mechanical resonators are often limited by multiple unavoidable forms of loss -- including phonon-phonon and phonon-defect scattering -- which result in the scattering of sound into other resonant modes and into the phonon bath. Dynamic suppression of this scattering loss can lift constraints on device structure and can improve tolerance to defects in the material, even…
▽ More
The coherence properties of mechanical resonators are often limited by multiple unavoidable forms of loss -- including phonon-phonon and phonon-defect scattering -- which result in the scattering of sound into other resonant modes and into the phonon bath. Dynamic suppression of this scattering loss can lift constraints on device structure and can improve tolerance to defects in the material, even after fabrication. Inspired by recent experiments, here we introduce a model of phonon losses resulting from disorder in a whispering gallery mode resonator with acousto-optical coupling between optical and mechanical modes. We show that a typical elastic scattering mechanism of high quality factor (Q) mechanical modes flips the direction of phonon propagation via high-angle scattering, leading to damping into modes with the opposite parity. When the optical mode overlaps co-propagating high-Q and bulk mechanical modes, the addition of laser cooling via sideband-resolved damping of the mechanical mode of a chosen parity also damps and modifies the response of the bulk modes of the same parity. This, in turn, simultaneously improves the quality factor and reduces the thermal load of the counter-propagating high-Q modes, leading to the dynamical creation of a cold phononic shield. We compare our theoretical results to the recent experiments of Kim et al., and find quantitative agreement with our theory.
△ Less
Submitted 29 December, 2016;
originally announced December 2016.
-
Dynamically induced robust phonon transport and chiral cooling in an optomechanical system
Authors:
Seunghwi Kim,
Xunnong Xu,
Jacob M. Taylor,
Gaurav Bahl
Abstract:
The transport of sound and heat, in the form of phonons, can be limited by disorder-induced scattering. In electronic and optical settings the introduction of chiral transport, in which carrier propagation exhibits parity asymmetry, can remove elastic backscattering and provides robustness against disorder. However, suppression of disorder-induced scattering has never been demonstrated in non-topo…
▽ More
The transport of sound and heat, in the form of phonons, can be limited by disorder-induced scattering. In electronic and optical settings the introduction of chiral transport, in which carrier propagation exhibits parity asymmetry, can remove elastic backscattering and provides robustness against disorder. However, suppression of disorder-induced scattering has never been demonstrated in non-topological phononic systems. Here we experimentally demonstrate a path for achieving robust phonon transport in the presence of material disorder, by explicitly inducing chirality through parity-selective optomechanical coupling. We show that asymmetric optical pumping of a symmetric resonator enables a dramatic chiral cooling of clockwise and counterclockwise phonons, while simultaneously suppressing the hidden action of disorder. Surprisingly, this passive mechanism is also accompanied by a chiral reduction in heat load leading to optical cooling of the mechanics without added damping, an effect that has no optical analogue. This technique can potentially improve upon the fundamental thermal limits of resonant mechanical sensors, which cannot be attained through sideband cooling.
△ Less
Submitted 19 June, 2017; v1 submitted 27 September, 2016;
originally announced September 2016.
-
Adaptive foveated single-pixel imaging with dynamic super-sampling
Authors:
David B. Phillips,
Ming-Jie Sun,
Jonathan M. Taylor,
Matthew P. Edgar,
Stephen M. Barnett,
Graham G. Gibson,
Miles J. Padgett
Abstract:
As an alternative to conventional multi-pixel cameras, single-pixel cameras enable images to be recorded using a single detector that measures the correlations between the scene and a set of patterns. However, to fully sample a scene in this way requires at least the same number of correlation measurements as there are pixels in the reconstructed image. Therefore single-pixel imaging systems typic…
▽ More
As an alternative to conventional multi-pixel cameras, single-pixel cameras enable images to be recorded using a single detector that measures the correlations between the scene and a set of patterns. However, to fully sample a scene in this way requires at least the same number of correlation measurements as there are pixels in the reconstructed image. Therefore single-pixel imaging systems typically exhibit low frame-rates. To mitigate this, a range of compressive sensing techniques have been developed which rely on a priori knowledge of the scene to reconstruct images from an under-sampled set of measurements. In this work we take a different approach and adopt a strategy inspired by the foveated vision systems found in the animal kingdom - a framework that exploits the spatio-temporal redundancy present in many dynamic scenes. In our single-pixel imaging system a high-resolution foveal region follows motion within the scene, but unlike a simple zoom, every frame delivers new spatial information from across the entire field-of-view. Using this approach we demonstrate a four-fold reduction in the time taken to record the detail of rapidly evolving features, whilst simultaneously accumulating detail of more slowly evolving regions over several consecutive frames. This tiered super-sampling technique enables the reconstruction of video streams in which both the resolution and the effective exposure-time spatially vary and adapt dynamically in response to the evolution of the scene. The methods described here can complement existing compressive sensing approaches and may be applied to enhance a variety of computational imagers that rely on sequential correlation measurements.
△ Less
Submitted 27 July, 2016;
originally announced July 2016.
-
Observation of Optomechanical Quantum Correlations at Room Temperature
Authors:
T. P. Purdy,
K. E. Grutter,
K. Srinivasan,
J. M. Taylor
Abstract:
By shining laser light through a nanomechanical beam, we measure the beam's thermally driven vibrations and perturb its motion with optical forces at a level dictated by the Heisenberg measurement-disturbance uncertainty relation. Such quantum backaction is typically difficult to observe at room temperature where the motion driven by optical quantum intensity fluctuations is many orders of magnitu…
▽ More
By shining laser light through a nanomechanical beam, we measure the beam's thermally driven vibrations and perturb its motion with optical forces at a level dictated by the Heisenberg measurement-disturbance uncertainty relation. Such quantum backaction is typically difficult to observe at room temperature where the motion driven by optical quantum intensity fluctuations is many orders of magnitude smaller than the thermal motion. We demonstrate a cross-correlation technique to distinguish optically driven motion from thermally driven motion, observing this quantum backaction signature up to room temperature. While it is often difficult to absolutely calibrate optical detection, we use the scale of the quantum correlations, which is determined by fundamental constants, to gauge the size of thermal motion, demonstrating a path towards absolute thermometry with quantum mechanically calibrated ticks.
△ Less
Submitted 18 May, 2016;
originally announced May 2016.
-
Observation of optomechanical buckling phase transitions
Authors:
Haitan Xu,
Utku Kemiktarak,
Jingyun Fan,
Stephen Ragole,
John Lawall,
Jacob M. Taylor
Abstract:
Correlated phases of matter provide long-term stability for systems as diverse as solids, magnets, and potential exotic quantum materials. Mechanical systems, such as relays and buckling transition spring switches can yield similar stability by exploiting non-equilibrium phase transitions. Curiously, in the optical domain, observations of such phase transitions remain elusive. However, efforts to…
▽ More
Correlated phases of matter provide long-term stability for systems as diverse as solids, magnets, and potential exotic quantum materials. Mechanical systems, such as relays and buckling transition spring switches can yield similar stability by exploiting non-equilibrium phase transitions. Curiously, in the optical domain, observations of such phase transitions remain elusive. However, efforts to integrate optical and mechanical systems -- optomechanics -- suggest that a hybrid approach combining the quantum control of optical systems with the engineerability of mechanical systems may provide a new avenue for such explorations. Here we report the first observation of the buckling of an optomechanical system, in which transitions between stable mechanical states corresponding to both first- and second-order phase transitions are driven by varying laser power and detuning. Our results enable new applications in photonics and, given rapid progress in pushing optomechanical systems into the quantum regime, the potential for explorations of quantum phase transitions.
△ Less
Submitted 27 November, 2015; v1 submitted 16 October, 2015;
originally announced October 2015.
-
Optomechanical reference accelerometer
Authors:
Oliver Gerberding,
Felipe Guzman Cervantes,
John Melcher,
Jon R. Pratt,
Jacob M. Taylor
Abstract:
We present an optomechanical accelerometer with high dynamic range, high bandwidth and read-out noise levels below 8 $μ$g/$\sqrt{\mathrm{Hz}}$. The straightforward assembly and low cost of our device make it a prime candidate for on-site reference calibrations and autonomous navigation. We present experimental data taken with a vacuum sealed, portable prototype and deduce the achieved bias stabili…
▽ More
We present an optomechanical accelerometer with high dynamic range, high bandwidth and read-out noise levels below 8 $μ$g/$\sqrt{\mathrm{Hz}}$. The straightforward assembly and low cost of our device make it a prime candidate for on-site reference calibrations and autonomous navigation. We present experimental data taken with a vacuum sealed, portable prototype and deduce the achieved bias stability and scale factor accuracy. Additionally, we present a comprehensive model of the device physics that we use to analyze the fundamental noise sources and accuracy limitations of such devices.
△ Less
Submitted 9 April, 2015; v1 submitted 4 April, 2015;
originally announced April 2015.
-
From membrane-in-the-middle to mirror-in-the-middle with a high-reflectivity sub-wavelength grating
Authors:
Corey Stambaugh,
Haitan Xu,
Utku Kemiktarak,
Jacob Taylor,
John Lawall
Abstract:
We demonstrate a "membrane in the middle" optomechanical system using a silicon nitride membrane patterned as a subwavelength grating. The grating has a reflectivity of over 99.8%, effectively creating two sub-cavities, with free spectral ranges of 6 GHz, optically coupled via photon tunneling. Measurements of the transmission and reflection spectra show an avoided crossing where the two sub-cavit…
▽ More
We demonstrate a "membrane in the middle" optomechanical system using a silicon nitride membrane patterned as a subwavelength grating. The grating has a reflectivity of over 99.8%, effectively creating two sub-cavities, with free spectral ranges of 6 GHz, optically coupled via photon tunneling. Measurements of the transmission and reflection spectra show an avoided crossing where the two sub-cavities simultaneously come into resonance, with a frequency splitting of 54 MHz. We derive expressions for the lineshapes of the symmetric and antisymmetric modes at the avoided crossing, and infer the grating reflection, transmission, absorption, and scattering through comparison with the experimental data.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Scanning localized magnetic fields in a microfluidic device with a single nitrogen vacancy center
Authors:
Kangmook Lim,
Chad Ropp,
Benjamin Shapiro,
Jacob M. Taylor,
Edo Waks
Abstract:
Nitrogen vacancy (NV) color centers in diamond have emerged as highly versatile optical emitters that exhibit room temperature spin properties. These characteristics make NV centers ideal for magnetometry, which plays an important role in chemical and biological sensing applications. The integration of NV magnetometers with microfluidic systems could enable the study of isolated chemical and biolo…
▽ More
Nitrogen vacancy (NV) color centers in diamond have emerged as highly versatile optical emitters that exhibit room temperature spin properties. These characteristics make NV centers ideal for magnetometry, which plays an important role in chemical and biological sensing applications. The integration of NV magnetometers with microfluidic systems could enable the study of isolated chemical and biological samples in a fluid environment with high spatial resolution. Here we demonstrate a method to perform localized magnetometry with nanometer spatial precision using a single NV center in a microfluidic device. We manipulate a magnetic particle within a liquid environment using a combination of planar microfluidic flow control and vertical magnetic actuation to achieve 3-dimensional manipulation. A diamond nanocrystal containing a single NV center is deposited in the microfluidic channels and acts as a local magnetic field probe. We map out the magnetic field distribution of the magnetic particle by varying its position relative to the diamond nanocrystal and performing optically resolved electron spin resonance (ESR) measurements. We control the magnetic particle position with a 48 nm precision and attain a magnetic field sensitivity of 17.5 microTesla/Hz^1/2. These results open up the possibility for studying local magnetic properties of biological and chemical systems with high sensitivity in an integrated microfluidic platform.
△ Less
Submitted 1 August, 2014; v1 submitted 5 July, 2014;
originally announced July 2014.
-
Chemical potential for light by parametric coupling
Authors:
M. Hafezi,
P. Adhikari,
J. M. Taylor
Abstract:
Usually photons are not conserved in their interaction with matter. Consequently, for the thermodynamics of photons, while we have a concept of temperature for energy conservation, there is no equivalent chemical potential for particle number conservation. However, the notion of a chemical potential is crucial in understanding a wide variety of single- and many-body effects, from transport in cond…
▽ More
Usually photons are not conserved in their interaction with matter. Consequently, for the thermodynamics of photons, while we have a concept of temperature for energy conservation, there is no equivalent chemical potential for particle number conservation. However, the notion of a chemical potential is crucial in understanding a wide variety of single- and many-body effects, from transport in conductors and semiconductors to phase transitions in electronic and atomic systems. Here we show how a direct modification of the system-bath coupling via parametric oscillation creates an effective chemical potential for photons even in the thermodynamic limit. In particular, we show that the photonic system equilibrates to the temperature of the bath, with a tunable chemical potential that is set by the frequency of the parametric coupler. Specific implementations, using circuit-QED or optomechanics, are feasible using current technologies, and we show a detailed example demonstrating the emergence of Mott insulator-superfluid transition in a lattice of nonlinear oscillators. Our approach paves the way for quantum simulation, quantum sources, and even electron-like circuits with light.
△ Less
Submitted 11 December, 2015; v1 submitted 22 May, 2014;
originally announced May 2014.
-
Topologically Robust Transport of Photons in a Synthetic Gauge Field
Authors:
S. Mittal,
J. Fan,
S. Faez,
A. Migdall,
J. M. Taylor,
M. Hafezi
Abstract:
Electronic transport in low dimensions through a disordered medium leads to localization. The addition of gauge fields to disordered media leads to fundamental changes in the transport properties. For example, chiral edge states can emerge in two-dimensional systems with a perpendicular magnetic field. Here, we implement a "synthetic'' gauge field for photons using silicon-on-insulator technology.…
▽ More
Electronic transport in low dimensions through a disordered medium leads to localization. The addition of gauge fields to disordered media leads to fundamental changes in the transport properties. For example, chiral edge states can emerge in two-dimensional systems with a perpendicular magnetic field. Here, we implement a "synthetic'' gauge field for photons using silicon-on-insulator technology. By determining the distribution of transport properties, we confirm the localized transport in the bulk and the suppression of localization in edge states, using the "gold standard'' for localization studies. Our system provides a new platform to investigate transport properties in the presence of synthetic gauge fields, which is important both from the fundamental perspective of studying photonic transport and for applications in classical and quantum information processing.
△ Less
Submitted 31 March, 2014;
originally announced April 2014.
-
Ultra-Sensitive Chip-Based Photonic Temperature Sensor Using Ring Resonator Structures
Authors:
Haitan Xu,
Mohammad Hafezi,
J. Fan,
J. M. Taylor,
G. F. Strouse,
Zeeshan Ahmed
Abstract:
Resistance thermometry provides a time-tested method for taking temperature measurements. However, fundamental limits to resistance-based approaches has produced considerable interest in developing photonic temperature sensors to leverage advances in frequency metrology and to achieve greater mechanical and environmental stability. Here we show that silicon-based optical ring resonator devices can…
▽ More
Resistance thermometry provides a time-tested method for taking temperature measurements. However, fundamental limits to resistance-based approaches has produced considerable interest in developing photonic temperature sensors to leverage advances in frequency metrology and to achieve greater mechanical and environmental stability. Here we show that silicon-based optical ring resonator devices can resolve temperature differences of 1 mK using the traditional wavelength scanning methodology. An even lower noise floor of 80 microkelvin for measuring temperature difference is achieved in the side-of-fringe, constant power mode measurement.
△ Less
Submitted 18 December, 2013;
originally announced December 2013.
-
Trapping atoms using nanoscale quantum vacuum forces
Authors:
D. E. Chang,
K. Sinha,
J. M. Taylor,
H. J. Kimble
Abstract:
Quantum vacuum forces dictate the interaction between individual atoms and dielectric surfaces at nanoscale distances. For example, their large strengths typically overwhelm externally applied forces, which makes it challenging to controllably interface cold atoms with nearby nanophotonic systems. Here, we show that it is possible to tailor the vacuum forces themselves to provide strong trapping p…
▽ More
Quantum vacuum forces dictate the interaction between individual atoms and dielectric surfaces at nanoscale distances. For example, their large strengths typically overwhelm externally applied forces, which makes it challenging to controllably interface cold atoms with nearby nanophotonic systems. Here, we show that it is possible to tailor the vacuum forces themselves to provide strong trapping potentials. The trapping scheme takes advantage of the attractive ground state potential and adiabatic dressing with an excited state whose potential is engineered to be resonantly enhanced and repulsive. This procedure yields a strong metastable trap, with the fraction of excited state population scaling inversely with the quality factor of the resonance of the dielectric structure. We analyze realistic limitations to the trap lifetime and discuss possible applications that might emerge from the large trap depths and nanoscale confinement.
△ Less
Submitted 22 October, 2013;
originally announced October 2013.
-
Theoretical analysis for the optical deformation of emulsion droplets
Authors:
David Tapp,
Jonathan M. Taylor,
Alex S. Lubanksy,
Colin D. Bain,
Buddhapriya Chakrabarti
Abstract:
We propose a theoretical framework to predict the three-dimensional shapes of optically deformed micron-sized emulsion droplets with ultra-low interfacial tension. The resulting shape and size of the droplet arises out of a balance between the interfacial tension and optical forces. Using an approximation of the laser field as a Gaussian beam, working within the Rayleigh-Gans regime and assuming i…
▽ More
We propose a theoretical framework to predict the three-dimensional shapes of optically deformed micron-sized emulsion droplets with ultra-low interfacial tension. The resulting shape and size of the droplet arises out of a balance between the interfacial tension and optical forces. Using an approximation of the laser field as a Gaussian beam, working within the Rayleigh-Gans regime and assuming isotropic surface energy at the oil-water interface, we numerically solve the resulting shape equations to elucidate the three-dimensional droplet geometry. We obtain a plethora of shapes as a function of the number of optical tweezers, their laser powers and positions, surface tension, initial droplet size and geometry. Experimentally, two-dimensional droplet silhouettes have been imaged from above, but their full side-on view has not been observed and reported for current optical configurations. This experimental limitation points to ambiguity in differentiating between droplets having the same two-dimensional projection but with disparate three-dimensional shapes. Our model elucidates and quantifies this difference for the first time. We also provide a dimensionless number that indicates the shape transformation (ellipsoidal to dumbbell) at a value $\approx 1.0$, obtained by balancing interfacial tension and laser forces, substantiated using a data collapse.
△ Less
Submitted 13 August, 2013;
originally announced August 2013.
-
Optical detection of radio waves through a nanomechanical transducer
Authors:
T. Bagci,
A. Simonsen,
S. Schmid,
L. G. Villanueva,
E. Zeuthen,
J. Appel,
J. M. Taylor,
A. Sørensen,
K. Usami,
A. Schliesser,
E. S. Polzik
Abstract:
Low-loss transmission and sensitive recovery of weak radio-frequency (rf) and microwave signals is an ubiquitous technological challenge, crucial in fields as diverse as radio astronomy, medical imaging, navigation and communication, including those of quantum states. Efficient upconversion of rf-signals to an optical carrier would allow transmitting them via optical fibers dramatically reducing l…
▽ More
Low-loss transmission and sensitive recovery of weak radio-frequency (rf) and microwave signals is an ubiquitous technological challenge, crucial in fields as diverse as radio astronomy, medical imaging, navigation and communication, including those of quantum states. Efficient upconversion of rf-signals to an optical carrier would allow transmitting them via optical fibers dramatically reducing losses, and give access to the mature toolbox of quantum optical techniques, routinely enabling quantum-limited signal detection. Research in the field of cavity optomechanics has shown that nanomechanical oscillators can couple very strongly to either microwave or optical fields. An oscillator accommodating both functionalities would bear great promise as the intermediate platform in a radio-to-optical transduction cascade. Here, we demonstrate such an opto-electro-mechanical transducer utilizing a high-Q nanomembrane. A moderate voltage bias (<10V) is sufficient to induce strong coupling between the voltage fluctuations in a rf resonance circuit and the membrane's displacement, which is simultaneously coupled to light reflected off its metallized surface. The circuit acts as an antenna; the voltage signals it induces are detected as an optical phase shift with quantum-limited sensitivity. The half-wave voltage is in the microvolt range, orders of magnitude below that of standard optical modulators. The noise added by the membrane is suppressed by the electro-mechanical cooperativity C~6800 and has a temperature of 40mK, far below 300K where the entire device is operated. This corresponds to a sensitivity limit as low as 5 pV/Hz^1/2, or -210dBm/Hz in a narrow band around 1 MHz. Our work introduces an entirely new approach to all-optical, ultralow-noise detection of classical electronic signals, and sets the stage for coherent upconversion of low-frequency quantum signals to the optical domain.
△ Less
Submitted 2 August, 2013; v1 submitted 12 July, 2013;
originally announced July 2013.
-
Beating the standard quantum limit for force sensing with a coupled two-mode optomechanical system
Authors:
Xunnong Xu,
Jacob M. Taylor
Abstract:
Optomechanics allows the transduction of weak forces to optical fields, with many efforts approaching the standard quantum limit. We consider force-sensing using a mirror-in-the-middle setup and use two coupled cavity modes originated from normal mode splitting for separating pump and probe fields. We find that this two-mode model can be reduced to an effective single-mode model, if we drive the p…
▽ More
Optomechanics allows the transduction of weak forces to optical fields, with many efforts approaching the standard quantum limit. We consider force-sensing using a mirror-in-the-middle setup and use two coupled cavity modes originated from normal mode splitting for separating pump and probe fields. We find that this two-mode model can be reduced to an effective single-mode model, if we drive the pump mode strongly and detect the signal from the weak probe mode. The optimal force detection sensitivity at zero frequency (DC) is calculated and we show that one can beat the standard quantum limit by driving the cavity close to instability. The best sensitivity achievable is limited by mechanical thermal noise and by optical losses. We also find that the bandwidth where optimal sensitivity is maintained is proportional to the cavity damping in the resolved sideband regime. Finally, the squeezing spectrum of the output signal is calculated, and it shows almost perfect squeezing at DC is possible by using a high quality factor and low thermal phonon-number mechanical oscillator.
△ Less
Submitted 29 March, 2013;
originally announced March 2013.
-
Quantum interface between an electrical circuit and a single atom
Authors:
D. Kielpinski,
D. Kafri,
M. J. Woolley,
G. J. Milburn,
J. M. Taylor
Abstract:
We show how to bridge the divide between atomic systems and electronic devices by engineering a coupling between the motion of a single ion and the quantized electric field of a resonant circuit. Our method can be used to couple the internal state of an ion to the quantized circuit with the same speed as the internal-state coupling between two ions. All the well-known quantum information protocols…
▽ More
We show how to bridge the divide between atomic systems and electronic devices by engineering a coupling between the motion of a single ion and the quantized electric field of a resonant circuit. Our method can be used to couple the internal state of an ion to the quantized circuit with the same speed as the internal-state coupling between two ions. All the well-known quantum information protocols linking ion internal and motional states can be converted to protocols between circuit photons and ion internal states. Our results enable quantum interfaces between solid state qubits, atomic qubits, and light, and lay the groundwork for a direct quantum connection between electrical and atomic metrology standards.
△ Less
Submitted 25 November, 2011;
originally announced November 2011.
-
Laser cooling and optical detection of excitations in a LC electrical circuit
Authors:
J. M. Taylor,
A. S. Sørensen,
C. M. Marcus,
E. S. Polzik
Abstract:
We explore a method for laser cooling and optical detection of excitations in a LC electrical circuit. Our approach uses a nanomechanical oscillator as a transducer between optical and electronic excitations. An experimentally feasible system with the oscillator capacitively coupled to the LC and at the same time interacting with light via an optomechanical force is shown to provide strong electro…
▽ More
We explore a method for laser cooling and optical detection of excitations in a LC electrical circuit. Our approach uses a nanomechanical oscillator as a transducer between optical and electronic excitations. An experimentally feasible system with the oscillator capacitively coupled to the LC and at the same time interacting with light via an optomechanical force is shown to provide strong electro-mechanical coupling. Conditions for improved sensitivity and quantum limited readout of electrical signals with such an "optical loud speaker" are outlined.
△ Less
Submitted 9 August, 2011;
originally announced August 2011.
-
Optical binding mechanisms: a conceptual model for Gaussian beam traps
Authors:
J. M. Taylor,
G. D. Love
Abstract:
Optical binding interactions between laser-trapped spherical microparticles are familiar in a wide range of trapping configurations. Recently it has been demonstrated that these experiments can be accurately modeled using Mie scattering or coupled dipole models. This can help confirm the physical phenomena underlying the inter-particle interactions, but does not necessarily develop a conceptual…
▽ More
Optical binding interactions between laser-trapped spherical microparticles are familiar in a wide range of trapping configurations. Recently it has been demonstrated that these experiments can be accurately modeled using Mie scattering or coupled dipole models. This can help confirm the physical phenomena underlying the inter-particle interactions, but does not necessarily develop a conceptual understanding of the effects that can lead to future predictions. Here we interpret results from a Mie scattering model to obtain a physical description which predict the behavior and trends for chains of trapped particles in Gaussian beam traps. In particular, it describes the non-uniform particle spacing and how it changes with the number of particles. We go further than simply \emph{demonstrating} agreement, by showing that the mechanisms ``hidden'' within a mathematically and computationally demanding Mie scattering description can be explained in easily-understood terms.
△ Less
Submitted 15 July, 2009;
originally announced July 2009.
-
The dipole polarizability of the hydrogen molecular ion
Authors:
J. M. Taylor,
A. Dalgarno,
J. F. Babb
Abstract:
A procedure is described for the precise nonrelativistic evaluation of the dipole polarizabilities of H_2^+ and D_2^+ that avoids any approximation based on the size of the electron mass relative to the nucleus mass. The procedure is constructed so that sum rules may be used to assess the accuracy of the calculation. The resulting polarizabilities are consistent with experiment within the error…
▽ More
A procedure is described for the precise nonrelativistic evaluation of the dipole polarizabilities of H_2^+ and D_2^+ that avoids any approximation based on the size of the electron mass relative to the nucleus mass. The procedure is constructed so that sum rules may be used to assess the accuracy of the calculation. The resulting polarizabilities are consistent with experiment within the error bars of the measurements and are far more precise than values obtained by other theoretical methods.
△ Less
Submitted 4 August, 1999;
originally announced August 1999.
-
Variational calculations on the hydrogen molecular ion
Authors:
J. M. Taylor,
Zong-Chao Yan,
A. Dalgarno,
J. F. Babb
Abstract:
We present high-precision non-relativistic variational calculations of bound vibrational-rotational state energies for the $H_2^+$ and $D_2^+$ molecular ions in each of the lowest electronic states of $Σ_g$, $Σ_u$, and $Π_u$ symmetry. The calculations are carried out including coupling between $Σ$ and $Π$ states but without using the Born-Oppenheimer or any adiabatic approximation. Convergence s…
▽ More
We present high-precision non-relativistic variational calculations of bound vibrational-rotational state energies for the $H_2^+$ and $D_2^+$ molecular ions in each of the lowest electronic states of $Σ_g$, $Σ_u$, and $Π_u$ symmetry. The calculations are carried out including coupling between $Σ$ and $Π$ states but without using the Born-Oppenheimer or any adiabatic approximation. Convergence studies are presented which indicate that the resulting energies for low-lying levels are accurate to about $10^{-13}$. Our procedure accounts naturally for the lambda-doubling of the $Π_u$ state.
△ Less
Submitted 11 March, 1999; v1 submitted 21 November, 1998;
originally announced November 1998.
