Showing 1–34 of 34 results for author: Tao, L

High-efficiency Electro-Optic Lens for radio frequency beam wavefront modulation for mode mismatch sensing

Authors: Liu Tao, Mauricio Diaz-Ortiz, Paul Fulda

Abstract: Active mode mismatch sensing and control can facilitate optimal coupling in optical cavity experiments such as interferometric gravitational wave detectors. In this paper, we demonstrate a radio-frequency (RF) beam wavefront curvature modulation-based mode mismatch sensing scheme inspired by the previously proposed RF beam jitter alignment sensing scheme. The proposed mode mismatch sensing scheme… ▽ More Active mode mismatch sensing and control can facilitate optimal coupling in optical cavity experiments such as interferometric gravitational wave detectors. In this paper, we demonstrate a radio-frequency (RF) beam wavefront curvature modulation-based mode mismatch sensing scheme inspired by the previously proposed RF beam jitter alignment sensing scheme. The proposed mode mismatch sensing scheme uses an electro-optic lens (EOL) device that is designed to provide the required beam wavefront curvature actuation, as well as a mode converting telescope that rephases the RF second-order modes and generates a non-vanishing mode mismatch sensing signal. We carefully investigate the total second-order mode generation from the wavefront actuation both analytically and numerically, taking the effects of Gaussian beam size evolution and the second-order mode phase mismatch cancellation into consideration. We demonstrate the second-order mode generation as a function of the incident beam waist size and the electro-optic crystal size, which along with a ``trade-off'' consideration of the beam size at the edges of the crystal and the clipping loss, provides us with guidance for designing the beam profile that interacts with the crystal to improve the EOL modulation efficiency. △ Less

Submitted 19 February, 2025; originally announced February 2025.

Journal ref: Applied Optics Vol. 64, Issue 6, pp. 1556-1564 (2025)

Angle measurement method of electronic speckle interferometry based on Michelson interferometer

Authors: Zhu Siyuan, Li Tao, Chen Zhongshan, Li Xin

Abstract: {This paper proposes an angle measurement method based on Electronic Speckle Pattern Interferometry (ESPI) using a Michelson interferometer. By leveraging different principles within the same device, this method achieves complementary advantages across various angle ranges, enhancing measurement accuracy while maintaining high robustness. By utilizing CCD to record light field information in real… ▽ More {This paper proposes an angle measurement method based on Electronic Speckle Pattern Interferometry (ESPI) using a Michelson interferometer. By leveraging different principles within the same device, this method achieves complementary advantages across various angle ranges, enhancing measurement accuracy while maintaining high robustness. By utilizing CCD to record light field information in real time and combining geometric and ESPI methods, relationships between small angles and light field information are established, allowing for the design of relevant algorithms for real-time angle measurement. Numerical simulations and experiments were conducted to validate the feasibility and practicality of this method. Results indicate that it maintains measurement accuracy while offering a wide angle measurement range, effectively addressing the limitations of small angle measurements in larger ranges, showcasing significant potential for widespread applications in related fields. △ Less

Submitted 19 November, 2024; originally announced November 2024.

GEM: A GEneral Memristive Transistor Model

Authors: Shengbo Wang, Jingfang Pei, Cong Li, Xuemeng Li, Li Tao, Arokia Nathan, Guohua Hu, Shuo Gao

Abstract: Neuromorphic devices, with their distinct advantages in energy efficiency and parallel processing, are pivotal in advancing artificial intelligence applications. Among these devices, memristive transistors have attracted significant attention due to their superior stability and operation flexibility compared to two-terminal memristors. However, the lack of a robust model that accurately captures t… ▽ More Neuromorphic devices, with their distinct advantages in energy efficiency and parallel processing, are pivotal in advancing artificial intelligence applications. Among these devices, memristive transistors have attracted significant attention due to their superior stability and operation flexibility compared to two-terminal memristors. However, the lack of a robust model that accurately captures their complex electrical behavior has hindered further exploration of their potential. In this work, we introduce the GEneral Memristive transistor (GEM) model to address this challenge. The GEM model incorporates time-dependent differential equation, a voltage-controlled moving window function, and a nonlinear current output function, enabling precise representation of both switching and output characteristics in memristive transistors. Compared to previous models, the GEM model demonstrates a 300% improvement in modeling the switching behavior, while effectively capturing the inherent nonlinearities and physical limits of these devices. This advancement significantly enhances the realistic simulation of memristive transistors, thereby facilitating further exploration and application development. △ Less

Submitted 7 November, 2024; v1 submitted 27 August, 2024; originally announced August 2024.

Comments: 5 pages, 5 figures

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Patient-Specific CT Doses Using DL-based Image Segmentation and GPU-based Monte Carlo Calculations for 10,281 Subjects

Authors: Zirui Ye, Bei Yao, Haoran Zheng, Li Tao, Ripeng Wang, Yankui Chang, Zhi Chen, Yingming Zhao, Wei Wei, Xie George Xu

Abstract: Computed tomography (CT) scans are a major source of medical radiation exposure worldwide. In countries like China, the frequency of CT scans has grown rapidly, particularly in routine physical examinations where chest CT scans are increasingly common. Accurate estimation of organ doses is crucial for assessing radiation risk and optimizing imaging protocols. However, traditional methods face chal… ▽ More Computed tomography (CT) scans are a major source of medical radiation exposure worldwide. In countries like China, the frequency of CT scans has grown rapidly, particularly in routine physical examinations where chest CT scans are increasingly common. Accurate estimation of organ doses is crucial for assessing radiation risk and optimizing imaging protocols. However, traditional methods face challenges due to the labor-intensive process of manual organ segmentation and the computational demands of Monte Carlo (MC) dose calculations. In this study, we present a novel method that combines automatic image segmentation with GPU-accelerated MC simulations to compute patient-specific organ doses for a large cohort of 10,281 individuals undergoing CT examinations for physical examinations at a Chinese hospital. This is the first big-data study of its kind involving such a large population for CT dosimetry. The results show considerable inter-individual variability in CTDIvol-normalized organ doses, even among subjects with similar BMI or WED. Patient-specific organ doses vary widely, ranging from 33% to 164% normalized by the doses from ICRP Adult Reference Phantoms. Statistical analyses indicate that the "Reference Man" based average phantoms can lead to significant dosimetric uncertainties, with relative errors exceeding 50% in some cases. These findings underscore the fact that previous assessments of radiation risk may be inaccurate. It took our computational tool, on average, 135 seconds per subject, using a single NVIDIA RTX 3080 GPU card. The big-data analysis provides interesting data for improving CT dosimetry and risk assessment by avoiding uncertainties that were neglected in the past. △ Less

Submitted 19 September, 2024; v1 submitted 21 January, 2024; originally announced January 2024.

Comments: 20 pages, 6 figures

Experimental demonstrations of alignment and mode matching in optical cavities with higher-order Hermite-Gauss modes

Authors: Liu Tao, Paul Fulda

Abstract: Higher-order spatial laser modes have recently been investigated as candidates for reducing test-mass thermal noise in ground-based gravitational-wave detectors such as advanced LIGO. In particular, higher-order Hermite-Gauss (HG) modes have gained attention within the community for their more robust behaviors against random test-mass surface deformations and stronger sensing and control capacitie… ▽ More Higher-order spatial laser modes have recently been investigated as candidates for reducing test-mass thermal noise in ground-based gravitational-wave detectors such as advanced LIGO. In particular, higher-order Hermite-Gauss (HG) modes have gained attention within the community for their more robust behaviors against random test-mass surface deformations and stronger sensing and control capacities. In this letter we offer experimental investigations on various aspects of HG mode interferometry. We have generated purified HG modes up to the 12-th order $\mathrm{HG}_{6,6}$ mode, with a power conversion efficiency of 38.8% and 27.7% for the $\mathrm{HG}_{3,3}$ and $\mathrm{HG}_{6,6}$ modes respectively. We demonstrated for the first time the misalignment and mode mismatch-induced power coupling loss measurements for HG modes up to the $\mathrm{HG}_{6,6}$. We report an excellent agreement with the extended numerical power loss factors that in the ``small power loss'' region converge to $2n+1$ or $n^2+n+1$ for a misaligned or mode mismatched $\mathrm{HG}_{n,n}$ mode. We also demonstrated the wavefront sensing (WFS) signal measurement for HG modes up to the $\mathrm{HG}_{6,6}$. The measurement result is accurately in accordance with theoretical WFS gain $β_{n,n-1}\sqrt{n} + β_{n,n+1}\sqrt{n+1}$ for an $\mathrm{HG}_{n,n}$ mode, with $β_{n,n-1}$ being the beat coefficient of the adjacent $\mathrm{HG}_{n,n}$ and $\mathrm{HG}_{n-1,n}$ modes on a split photodetector. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 6 pages, 6 figures

Journal ref: Phys. Rev. Lett. 132, 101402 (2024)

The changing rule of human bone density with aging based on a novel definition and mensuration of bone density with computed tomography

Authors: Linmi Tao, Ruiyang Liu, Yuanbiao Wang, Yuezhi Zhou, Li Huo, Guilan Hu, Xiangsong Zhang, Zuo-Xiang He

Abstract: Osteoporosis and fragility fractures have emerged as major public health concerns in an aging population. However, measuring age-related changes in bone density using dual-energy X-ray absorptiometry has limited personalized risk assessment due to susceptibility to interference from various factors. In this study, we propose an innovative statistical model of bone pixel distribution in fine-segmen… ▽ More Osteoporosis and fragility fractures have emerged as major public health concerns in an aging population. However, measuring age-related changes in bone density using dual-energy X-ray absorptiometry has limited personalized risk assessment due to susceptibility to interference from various factors. In this study, we propose an innovative statistical model of bone pixel distribution in fine-segmented computed tomography (CT) images, along with a novel approach to measuring bone density based on CT values of bone pixels. Our findings indicate that bone density exhibits a linear decline with age during adulthood between the ages of 39 and 80, with the rate of decline being approximately 1.6 times faster in women than in men. This contradicts the widely accepted notion that bone density starts declining in women at menopause and in men at around 50 years of age. The linearity of age-related changes provides further insights into the dynamics of the aging human body. Consequently, our findings suggest that the definition of osteoporosis by the World Health Organization should be revised to the standard deviation of age-based bone density. Furthermore, these results open up new avenues for research in bone health care and clinical investigation of osteoporosis. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Second-scale rotational coherence and dipolar interactions in a gas of ultracold polar molecules

Authors: Philip D. Gregory, Luke M. Fernley, Albert Li Tao, Sarah L. Bromley, Jonathan Stepp, Zewen Zhang, Svetlana Kotochigova, Kaden R. A. Hazzard, Simon L. Cornish

Abstract: Ultracold polar molecules uniquely combine a rich structure of long-lived internal states with access to controllable long-range, anisotropic dipole-dipole interactions. In particular, the rotational states of polar molecules confined in optical tweezers or optical lattices may be used to encode interacting qubits for quantum computation or pseudo-spins for simulating quantum magnetism. As with al… ▽ More Ultracold polar molecules uniquely combine a rich structure of long-lived internal states with access to controllable long-range, anisotropic dipole-dipole interactions. In particular, the rotational states of polar molecules confined in optical tweezers or optical lattices may be used to encode interacting qubits for quantum computation or pseudo-spins for simulating quantum magnetism. As with all quantum platforms, the engineering of robust coherent superpositions of states is vital. However, for optically trapped molecules, the coherence time between rotational states is typically limited by inhomogeneous light shifts. Here we demonstrate a rotationally-magic optical trap for RbCs molecules that supports a Ramsey coherence time of 0.78(4) seconds in the absence of dipole-dipole interactions. This extends to >1.4 seconds at the 95% confidence level using a single spin-echo pulse. In our magic trap, dipolar interactions become the dominant mechanism by which Ramsey contrast is lost for superpositions that generate oscillating dipoles. By changing the states forming the superposition, we tune the effective dipole moment and show that the coherence time is inversely proportional to the strength of the dipolar interaction. Our work unlocks the full potential of the rotational degree of freedom in molecules for quantum computation and quantum simulation. △ Less

Submitted 11 August, 2023; v1 submitted 5 June, 2023; originally announced June 2023.

Comments: 12 pages, 7 figures (main text and supplementary information combined)

Beam displacement tolerances on a segmented mirror for higher-order Hermite-Gauss modes

Authors: Liu Tao, Nina Brown, Paul Fulda

Abstract: Odd-indexed higher-order Hermite-Gauss (HG) modes are compatible with 4-quadrant segmented mirrors due to their intensity nulls along the principal axes, which guarantees minimum beam intensity illuminating the bond lines between the segments thus leading to low power loss. However, a misplaced HG beam can cause extra power loss due to the bright intensity spots probing the bond lines. This paper… ▽ More Odd-indexed higher-order Hermite-Gauss (HG) modes are compatible with 4-quadrant segmented mirrors due to their intensity nulls along the principal axes, which guarantees minimum beam intensity illuminating the bond lines between the segments thus leading to low power loss. However, a misplaced HG beam can cause extra power loss due to the bright intensity spots probing the bond lines. This paper analytically and numerically studies the beam displacement tolerances on a segmented mirror for the $\mathrm{HG_{3,3}}$ mode. We conclude that for "effective" bond lines with 6 $μ$m width, and the $\mathrm{HG_{3,3}}$ beam size chosen to guarantee 1 ppm clipping loss when centered, the beam can be rotated by roughly 1 degree or laterally displaced by 4% of its beam size while keeping the total power on the bond lines under 1 ppm. We also demonstrate that the constrained beam displacement parameter region that guarantees a given power loss limit, or the beam displacement tolerance, is inversely proportional to the bond line thickness. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: 4 pages, 6 pages

Misalignment and mode mismatch error signals for higher-order Hermite-Gauss modes from two sensing schemes

Authors: Liu Tao, Anna C. Green, Paul Fulda

Abstract: The locking of lasers to optical cavities is ubiquitously required in the field of precision interferometry such as Advanced LIGO to yield optimal sensitivity. Using higher-order Hermite-Gauss (HG) modes for the main interferometer beam has been a topic of recent study, due to their potential for reducing thermal noise of the test masses. It has been shown however that higher-order HG modes are mo… ▽ More The locking of lasers to optical cavities is ubiquitously required in the field of precision interferometry such as Advanced LIGO to yield optimal sensitivity. Using higher-order Hermite-Gauss (HG) modes for the main interferometer beam has been a topic of recent study, due to their potential for reducing thermal noise of the test masses. It has been shown however that higher-order HG modes are more susceptible to coupling losses into optical cavities: the misalignment and mode mismatch induced power losses scale as $2n+1$ and $n^{2}+n+1$ respectively with $n$ being the mode index. In this paper we calculate analytically for the first time the alignment and mode mismatch sensing signals for arbitrary higher-order HG modes with both the traditional sensing schemes (using Gouy phase telescopes and quadrant photodetectors) and the more recently proposed radio-frequency jitter-based sensing schemes (using only single element photodiodes). We show that the sensing signals and also the signal-to-shot noise ratios for higher-order HG modes are larger than for the fundamental mode. In particular, the alignment and mode mismatch sensing signals in the traditional sensing schemes scale approximately as $\sqrt{n}$ and $n$ respectively, whereas in the jitter-based sensing schemes they scale exactly as $2n+1$ and $n^{2}+n+1$, respectively, which exactly matches the decrease in their respective tolerances. This potentially mitigates the downside of higher-order HG modes for their suffering from excessive misalignment and mode-mismatch induced power losses. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: 11 pages 6 figures

Journal ref: Phys. Rev. D 108, 062001 (2023)

Moment-based space-variant Shack-Hartmann wavefront reconstruction

Authors: Fan Feng, Chen Liang, Dongdong Chen, Ke Du, Runjia Yang, Chang Lu, Shumin Chen, Wenting He, Pingyong Xu, Liangyi Chen, Louis Tao, Heng Mao

Abstract: Based on image moment theory, an approach for space-variant Shack-Hartmann wavefront reconstruction is presented in this article. The relation between the moment of a pair of subimages and the local transformation coefficients is derived. The square guide 'star' is used to obtain a special solution from this relation. The moment-based wavefront reconstruction has a reduced computational complexity… ▽ More Based on image moment theory, an approach for space-variant Shack-Hartmann wavefront reconstruction is presented in this article. The relation between the moment of a pair of subimages and the local transformation coefficients is derived. The square guide 'star' is used to obtain a special solution from this relation. The moment-based wavefront reconstruction has a reduced computational complexity compared to the iteration-based algorithm. Image restorations are executed by the tiling strategy with 5 $\times$ 5 PSFs as well as the conventional strategy with a global average PSF. Visual and quantitative evaluations support our approach. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Comments: This paper has been accepted for publication in the journal Optics Communications on April 12th, 2023

Report number: OPTICS_129515

Journal ref: Optics Communications,2023

Antibacterial Activity of Zinc Oxide Thin Films by Atomic Layer Deposition for Personal Protective Equipment Applications

Authors: Li Tao, Kinga Vojnits, Man In Lam, Xuejun Lu, Sepideh Pakpour, Jian Liu

Abstract: The global pandemic has significantly increased the demand for personal protective equipment (PPE). The antimicrobial coating has been broadly applied to PPE to improve its prevention capability, especially after prolonged usage. However, antimicrobial coating by traditional methods, such as chemical vapor deposition, spraying, and slurry coating, suffers from drawbacks such as low efficiency, poo… ▽ More The global pandemic has significantly increased the demand for personal protective equipment (PPE). The antimicrobial coating has been broadly applied to PPE to improve its prevention capability, especially after prolonged usage. However, antimicrobial coating by traditional methods, such as chemical vapor deposition, spraying, and slurry coating, suffers from drawbacks such as low efficiency, poor coverage, and loose adhesion to PPE. To overcome these limitations, this work adopted an atomic layer deposition (ALD) technique to deposit a zinc oxide (ZnO) thin film (~ 312.8 nm thick) as an antimicrobial coating and proved its advantage for depositing uniform ZnO coating on PPE with a fabric structure. Analysis by X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy confirmed the crystal structure and chemical composition of the ALD-ZnO. Ultraviolet-visible spectra disclosed a high absorption level of about 4.8 from 200 nm to 380 nm wavelength for ALD-ZnO, in contrast to 3.8 for commercial ZnO powders. Moreover, the ALD-ZnO exhibited strong antimicrobial properties when tested against Escherichia coli (E.Coli) in contrast to the control and bare glass samples. The colony-forming unit (CFU/ml) remained zero for all ALD-ZnO samples while varying between 2.30*109 and 4.97*109 with a median of 4.36*109 for the control and between 9.10*108 and 3.27*109 with a median of 2.04x 109 for the bare glass. Statistic analysis using null-hypothesis significance testing revealed that the calculated P value, between bare glass and control, ALD-ZnO and control, and bare glass and control, were all smaller than 0.0001 and significantly smaller than 0.05 alpha value, suggesting a high confidence level of ALD-ZnO as the main factor for preventing E.Coli growth. △ Less

Submitted 3 February, 2023; originally announced February 2023.

Comments: 22 pages, 7 figures in the main text, 6 figures in supporting information

Space-variant Shack-Hartmann wavefront sensing based on affine transformation estimation

Authors: Fan Feng, Chen Liang, Dongdong Chen, Ke Du, Runjia Yang, Chang Lu, Shumin Chen, Liangyi Chen, Louis Tao, Heng Mao

Abstract: The space-variant wavefront reconstruction problem inherently exists in deep tissue imaging. In this paper,we propose a framework of Shack-Hartmann wavefront space-variant sensing with extended source illumination. The space-variant wavefront is modeled as a four-dimensional function where two dimensionsare in the spatial domain and two in the Fourier domain with priors that both gently vary. Here… ▽ More The space-variant wavefront reconstruction problem inherently exists in deep tissue imaging. In this paper,we propose a framework of Shack-Hartmann wavefront space-variant sensing with extended source illumination. The space-variant wavefront is modeled as a four-dimensional function where two dimensionsare in the spatial domain and two in the Fourier domain with priors that both gently vary. Here, the affinetransformation is used to characterize the wavefront space-variant function. Correspondingly, the zonaland modal methods are both escalated to adapt to four-dimensional representation and reconstruction.Experiments and simulations show double to quadruple improvements in space-variant wavefront reconstruction accuracy compared to the conventional space-invariant correlation method. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: \c{opyright} 2022 Optica Publishing Group. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited

Journal ref: Applied Optics, 2022

Transmission-matrix Quantitative Phase Profilometry for Accurate and Fast Thickness Mapping of 2D Materials

Authors: Yujie Nie, Nansen Zhou, Li Tao, Jinlong Zhu, Zhaoli Gao, Jianbin Xu, Renjie Zhou

Abstract: The physical properties of two-dimensional (2D) materials may drastically vary with their thickness profiles. Current thickness profiling methods for 2D material (e.g., atomic force microscopy and ellipsometry) are limited in measurement throughput and accuracy. Here we present a novel high-speed and high-precision thickness profiling method, termed Transmission-Matrix Quantitative Phase Profilome… ▽ More The physical properties of two-dimensional (2D) materials may drastically vary with their thickness profiles. Current thickness profiling methods for 2D material (e.g., atomic force microscopy and ellipsometry) are limited in measurement throughput and accuracy. Here we present a novel high-speed and high-precision thickness profiling method, termed Transmission-Matrix Quantitative Phase Profilometry (TM-QPP). In TM-QPP, picometer-level optical pathlength sensitivity is enabled by extending the photon shot-noise limit of a high sensitivity common-path interferometric microscopy technique, while accurate thickness determination is realized by developing a transmission-matrix model that accounts for multiple refractions and reflections of light at sample interfaces. Using TM-QPP, the exact thickness profiles of monolayer and few-layered 2D materials (e.g., MoS2, MoSe2 and WSe2) are mapped over a wide field of view within seconds in a contact-free manner. Notably, TM-QPP is also capable of spatially resolving the number of layers of few-layered 2D materials. △ Less

Submitted 9 July, 2022; originally announced July 2022.

Thickness dependent dark exciton emission in (PEA)2PbI4 nanoflake and its brightening by in-plane magnetic field

Authors: Wei Tang, Liting Tao, Tian Zhang, Yanjun Fang, Deren Yang, Linjun Li

Abstract: Halide perovskite materials raised tremendous interest in recent years since their cheap fabrication, superior performance in both solar cell and light emitting diode (LED). Due to the existence of layered quantum well structure, quasi two-dimensional(2D) halide perovskite has more intriguing spin related physics than its 3D counterpart. For instance, the detection and brightening of dark exciton… ▽ More Halide perovskite materials raised tremendous interest in recent years since their cheap fabrication, superior performance in both solar cell and light emitting diode (LED). Due to the existence of layered quantum well structure, quasi two-dimensional(2D) halide perovskite has more intriguing spin related physics than its 3D counterpart. For instance, the detection and brightening of dark exciton (DX) in 2D halide perovskite attracts much attention since these species can be used in opto-spintronic and quantum computing devices. Here, we report the gradually brightened emission of the DX at 2.33 eV with the thickness decreases in (PEA)2PbI4 single crystalline nanoflake, which hitherto has not been reported. By coupling with in-plane (IP) magnetic field in Voigt configuration, the DX emission can be sharply enhanced, while for the out-of-plane (OP) magnetic field in Faraday configuration, the DX emission has no noticeable change, which can be reconciled with the theory interpretation of magnetic field dependent wave function mixing between the four exciton states fi1, fi2, fi3- , fi3+. The emission of DX fi2 at 2.335 eV and the fine splitting of all the four states are observed in static PL spectroscopy for the first time. Our work thus clarifies the debating questions regarding to previous research on DX behavior in 2D halide perovskite material and sheds light on the road of realizing opto-spintronic or quantum computing devices with these materials. △ Less

Submitted 22 November, 2021; v1 submitted 15 November, 2021; originally announced November 2021.

Comments: 2nd version

Virtual Point Source Synthesis method for 3D Scintillation Detector Characterization

Authors: Xin Li, Li Tao, Craig S. Levin, Lars R. Furenlid

Abstract: A novel data-processing method was developed to facilitate scintillation detector characterization. Combined with fan-beam calibration, this method can be used to quickly and conveniently calibrate gamma-ray detectors for SPECT, PET, homeland security or astronomy. Compared with traditional calibration methods, this new technique can accurately calibrate a photon-counting detector, including DOI i… ▽ More A novel data-processing method was developed to facilitate scintillation detector characterization. Combined with fan-beam calibration, this method can be used to quickly and conveniently calibrate gamma-ray detectors for SPECT, PET, homeland security or astronomy. Compared with traditional calibration methods, this new technique can accurately calibrate a photon-counting detector, including DOI information, with greatly reduced time. The enabling part of this technique is fan-beam scanning combined with a data-processing strategy called the common-data subset (CDS) method, which was used to synthesize the detector's mean detector response functions (MDRFs). Using this approach, $2N$ scans ($N$ in x and $N$ in y direction) are necessary to finish calibration of a 2D detector as opposed to $N^2$ scans with a pencil beam. For a 3D detector calibration, only $3N$ scans are necessary to achieve the 3D detector MDRFs that include DOI information. Moreover, this calibration technique can be used for detectors with complicated or irregular MDRFs. We present both Monte-Carlo simulations and experimental results that support the feasibility of this method. △ Less

Submitted 23 June, 2021; originally announced June 2021.

High-precision Time-Frequency Signal Simultaneous Transfer System via a WDM-based Fiber Link

Authors: Zang Qi, Quan Honglei, Zhao Kan, Zhang Xiang, Xue Wenxiang, Chen Faxi, Zhao Wenyu, Liu Tao, Dong Ruifang, Zhang Shougang

Abstract: In this paper, we demonstrate a wavelength division multiplexing (WDM) based system for simultaneously delivering ultrastable optical frequency reference, 10 GHz microwave frequency reference, and one pulse per second (1 PPS) time signal via a 50 km fiber network. For each signal, a unique noise cancellation technique is used to maintain the precision of them. After being compensated, the transfer… ▽ More In this paper, we demonstrate a wavelength division multiplexing (WDM) based system for simultaneously delivering ultrastable optical frequency reference, 10 GHz microwave frequency reference, and one pulse per second (1 PPS) time signal via a 50 km fiber network. For each signal, a unique noise cancellation technique is used to maintain the precision of them. After being compensated, the transfer frequency instability in terms of overlapping Allan deviation (OADEV) for the optical frequency achieves 2E-17/s and scales down to 2E-20/10000 s, which for the 10 GHz microwave reference approaches 4E-15/s and decreases to 1.4E-17/10000 s, and the time uncertainty of the 1 PPS time signal along the system is 2.08 ps. In this scheme, specific channels of WDM are respectively occupied for different signals to avoid the possible crosstalk interference effect between the transmitted reference signals. To estimate the performance of the above scheme, independent of these signals is also demonstrated in this 50 km link, the results are similar to that in the case of simultaneous delivery. This work shows that the WDM-based system is a promising method for building a nationwide time and frequency fiber transfer system with a communication optical network. △ Less

Submitted 7 July, 2021; v1 submitted 8 June, 2021; originally announced June 2021.

Comments: 11 pages,4 figures,1 table

A Spontaneously Formed Plasmonic-MoTe2 Hybrid Platform for Ultrasensitive Raman Enhancement

Authors: Li Tao, Zhiyong Li, Kun Chen, Yaoqiang Zhou, Hao Li, Ximiao Wang, Runze Zhan, Xiangyu Hou, Yu Zhao, Junling Xu, Teng Qiu, Xi Wan, Jian-Bin Xu

Abstract: To develop highly sensitive, stable and repeatable surface-enhanced Raman scattering (SERS) substrates is crucial for analytical detection, which is a challenge for traditional metallic structures. Herein, by taking advantage of the high surface activity of 1T' transition metal telluride, we have fabricated high-density gold nanoparticles (AuNPs) that are spontaneously in-situ prepared on the 1T'… ▽ More To develop highly sensitive, stable and repeatable surface-enhanced Raman scattering (SERS) substrates is crucial for analytical detection, which is a challenge for traditional metallic structures. Herein, by taking advantage of the high surface activity of 1T' transition metal telluride, we have fabricated high-density gold nanoparticles (AuNPs) that are spontaneously in-situ prepared on the 1T' MoTe2 atomic layers via a facile method, forming a plasmonic-2D material hybrid SERS substrate. This AuNP formation is unique to the 1T' phase, which is repressed in 2H MoTe2 with less surface activity. The hybrid structure generates coupling effects of electromagnetic and chemical enhancements, as well as excellent molecule adsorption, leading to the ultrasensitive (4*10^-17 M) and reproducible detection. Additionally, the immense fluorescence and photobleaching phenomena are mostly avoided. Flexible SERS tapes have been demonstrated in practical applications. Our approach facilitates the ultrasensitive SERS detection by a facile method, as well as the better mechanistic understanding of SERS beyond plasmonic effects. △ Less

Submitted 28 July, 2021; v1 submitted 28 February, 2021; originally announced March 2021.

Journal ref: Cell Reports Physical Science, 2021, 2, 100526

Single-photon distributed free-space spectroscopy

Authors: S. Yu, Z. Zhang, H. Xia, X. Dou, M. Li, T. Wei, L. Wang, P. Jiang, Y. Wu, C. Zhang, L. You, Y. Hu, T. Wu, L. Zhao, M. Shangguan, L. Tao, J. Qiu

Abstract: Spectroscopy is a well-established nonintrusive tool that has played an important role in identifying substances and quantifying their compositions, from quantum descriptions to chemical and biomedical diagnostics. Challenges exist in accurate measurements in dynamic environments, especially for understanding chemical reactions in arbitrary free-space. We develop a distributed free-space spectrosc… ▽ More Spectroscopy is a well-established nonintrusive tool that has played an important role in identifying substances and quantifying their compositions, from quantum descriptions to chemical and biomedical diagnostics. Challenges exist in accurate measurements in dynamic environments, especially for understanding chemical reactions in arbitrary free-space. We develop a distributed free-space spectroscopy realized by a comb-referenced frequency-scanning single-photon lidar, providing multidimensional (time-range-spectrum) remote sensing. A continuous field experiment over 72 hours is deployed to obtain the spectra of multiple molecules (CO2 and HDO) in free-space over 6 km, with a range resolution of 60 m and a time resolution of 10 min over a spectrum span of 30 GHz. The CO2 and HDO concentrations are retrieved from the spectra acquired. This distributed free-space spectroscopy holds much promise for increasing knowledge of atmospheric environments and chemistry research, especially for complex molecular spectra evolution in any location over large areas. △ Less

Submitted 27 November, 2020; originally announced December 2020.

Comments: 5 pages, 5 figures

Large-area synthesis of continuous two-dimensional MoTexSe2-x alloy films by chemical vapor deposition

Authors: Shudong Zhao, Meilin Lu, Shasha Xue, Lei Tao, Yu Sui, Yang Wang

Abstract: Great achievements have been made in alloying of two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), which can allow tunable band gaps for practical applications in optoelectronic devices. However, telluride-based TMDs alloys were less studied due to the difficulties of sample synthesis. Here, in this work we report the large-area synthesis of 2D MoTexSe2-x alloy films wit… ▽ More Great achievements have been made in alloying of two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), which can allow tunable band gaps for practical applications in optoelectronic devices. However, telluride-based TMDs alloys were less studied due to the difficulties of sample synthesis. Here, in this work we report the large-area synthesis of 2D MoTexSe2-x alloy films with controllable Te composition by a modified alkali metal halides assisted chemical vapor deposition method. The as-prepared films have millimeter-scale transverse size. Raman spectra experiments combining calculated Raman spectra and vibrational images obtained by density functional theory (DFT) confirmed the 2H-phase of the MoTexSe2-x alloys. The A1g mode of MoSe2 shows a significant downshift accompanied by asymmetric broadening to lower wavenumber with increasing value of x, while E12g mode seems unchanged, which were well explained by a phonon confinement model. Our work provides a simple method to synthesize large-scale 2H phase Te-based 2D TMDs alloys for their further applications. △ Less

Submitted 23 April, 2019; originally announced April 2019.

A Se vacancy induced localized Raman mode in two-dimensional MoSe2 grown by CVD

Authors: Shudong Zhao, Meilin Lu, ShaSha Xue, Lin Yan, Peng Miao, Yan Hang, Xianjie Wang, Zhiguo Liu, Yi Wang, Lei Tao, Yu Sui, Yang Wang

Abstract: Defects play a significant role in optical properties of semiconducting two-dimensional transition metal dichalcogenides (TMDCs). In ultra-thin MoSe2, a remarkable feature at ~250 cm-1 in Raman spectra is ascribed to be a defect-related mode. Recent attempts failed to explain the origin of this peak, leaving it being a mystery. Here in this work, we demonstrate that this peak is a Se vacancy induc… ▽ More Defects play a significant role in optical properties of semiconducting two-dimensional transition metal dichalcogenides (TMDCs). In ultra-thin MoSe2, a remarkable feature at ~250 cm-1 in Raman spectra is ascribed to be a defect-related mode. Recent attempts failed to explain the origin of this peak, leaving it being a mystery. Here in this work, we demonstrate that this peak is a Se vacancy induced defect mode. Heat effect and hydrogen etching are two main factors to introduce Se vacancies in CVD process of growing MoSe2. A phonon confinement model can well explain the behaviors of intrinsic Raman modes. Density functional theory (DFT) calculation reveals that single Se vacancy (VSe) is responsible for the appearance of Raman peak at ~250 cm-1 and this mode is an A1g-like localized mode which is also confirmed by polarized Raman scattering experiment. The relative strength of this mode can be a characterization of the quality of 2D MoSe2. This work may offer a simple method to tailor chalcogenide vacancies in 2D TMDCs and provide a way to study their vibrational properties. △ Less

Submitted 22 April, 2019; originally announced April 2019.

Dissociation energy of the hydrogen molecule at 10$^{-9}$ accuracy

Authors: C. Cheng, J. Hussels, M. Niu, H. L. Bethlem, K. S. E. Eikema, E. J. Salumbides, W. Ubachs, M. Beyer, N. J. Hölsch, J. A. Agner, F. Merkt, L. -G. Tao, S. -M. Hu, Ch. Jungen

Abstract: The ionization energy of ortho-H$_2$ has been determined to be $E^\mathrm{o}_\mathrm{I}(\mathrm{H}_2)/(hc)=124\,357.238\,062(25)$ cm$^{-1}$ from measurements of the GK(1,1)--X(0,1) interval by Doppler-free two-photon spectroscopy using a narrow band 179-nm laser source and the ionization energy of the GK(1,1) state by continuous-wave near-infrared laser spectroscopy. $E^\mathrm{o}_\mathrm{I}$(H… ▽ More The ionization energy of ortho-H$_2$ has been determined to be $E^\mathrm{o}_\mathrm{I}(\mathrm{H}_2)/(hc)=124\,357.238\,062(25)$ cm$^{-1}$ from measurements of the GK(1,1)--X(0,1) interval by Doppler-free two-photon spectroscopy using a narrow band 179-nm laser source and the ionization energy of the GK(1,1) state by continuous-wave near-infrared laser spectroscopy. $E^\mathrm{o}_\mathrm{I}$(H$_2$) was used to derive the dissociation energy of H$_2$, $D^{N=1}_{0}$(H$_2$), at $35\,999.582\,894(25)$ cm$^{-1}$ with a precision that is more than one order of magnitude better than all previous results. The new result challenges calculations of this quantity and represents a benchmark value for future relativistic and QED calculations of molecular energies. △ Less

Submitted 30 April, 2018; originally announced April 2018.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Lett. 121, 013001 (2018)

Toward a determination of the proton-electron mass ratio from the Lamb-dip measurement of HD

Authors: L. -G. Tao, A. -W. Liu, K. Pachucki, J. Komasa, Y. R. Sun, J. Wang, S. -M. Hu

Abstract: Precision spectroscopy of the hydrogen molecule is a test ground of quantum electrodynamics (QED), and may serve for determination of fundamental constants. Using a comb-locked cavity ring-down spectrometer, for the first time, we observed the Lamb-dip spectrum of the R(1) line in the overtone of HD. The line position was determined to be 217 105 182.79 $\pm0.03_{stat}\pm0.08_{syst}$ MHz (… ▽ More Precision spectroscopy of the hydrogen molecule is a test ground of quantum electrodynamics (QED), and may serve for determination of fundamental constants. Using a comb-locked cavity ring-down spectrometer, for the first time, we observed the Lamb-dip spectrum of the R(1) line in the overtone of HD. The line position was determined to be 217 105 182.79 $\pm0.03_{stat}\pm0.08_{syst}$ MHz ($δν/ν=4\times 10^{-10}$), which is the most accurate transition ever measured for the hydrogen molecule. Moreover, from calculations including QED effects up to the order $m_eα^6$, we obtained predictions for this R(1) line as well as for the HD dissociation energy, which are less accurate but signaling the importance of the complete treatment of nonadiabatic effects. Provided that the theoretical calculation reaches the same accuracy, the present measurement will lead to a determination of the proton-electron mass ratio with a precision of 1.3 parts per billion. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 120, 153001 (2018)

Molecular near-infrared transitions determined with sub-kHz accuracy

Authors: Jin Wang, Yu R. Sun, Lei-Gang Tao, An-Wen Liu, Shui-Ming Hu

Abstract: Precise molecular transition frequencies are of great interest in the test of fundamental physics and also in various applications. Two well isolated ro-vibrational transitions of $^{12}$C$^{16}$O at 1.57 $μ$m, R(9) and R(10) in the second overtone band molecule, were measured by a comb-locked cavity ring-down spectrometer. Despite the weakness of the lines (Einstein coefficient $A\simeq 0.008$ s… ▽ More Precise molecular transition frequencies are of great interest in the test of fundamental physics and also in various applications. Two well isolated ro-vibrational transitions of $^{12}$C$^{16}$O at 1.57 $μ$m, R(9) and R(10) in the second overtone band molecule, were measured by a comb-locked cavity ring-down spectrometer. Despite the weakness of the lines (Einstein coefficient $A\simeq 0.008$ s$^{-1}$), Lamb-dip spectra were recorded with a signal-to-noise ratio over 1000, and the line positions were determined to be 191 360 212 763.7 and 191 440 612 664.8 kHz respectively, with an uncertainty of 0.5 kHz ($δν/ν=2.6\times 10^{-12}$). The present work demonstrated the possibility to explore extensive molecular lines in the near-infrared with sub-kHz accuracy. △ Less

Submitted 25 August, 2017; v1 submitted 23 July, 2017; originally announced July 2017.

Hybrid graphene tunneling photoconductor with interface engineering towards fast photoresponse and high responsivity

Authors: Li Tao, Zefeng Chen, Xinming Li, Keyou Yan, Jian-Bin Xu

Abstract: Hybrid graphene photoconductor/phototransistor has achieved giant photoresponsivity, but its response speed dramatically degrades as the expense due to the long lifetime of trapped interfacial carriers. In this work, by intercalating a large-area atomically thin MoS2 film into a hybrid graphene photoconductor, we have developed a prototype tunneling photoconductor, which exhibits a record-fast res… ▽ More Hybrid graphene photoconductor/phototransistor has achieved giant photoresponsivity, but its response speed dramatically degrades as the expense due to the long lifetime of trapped interfacial carriers. In this work, by intercalating a large-area atomically thin MoS2 film into a hybrid graphene photoconductor, we have developed a prototype tunneling photoconductor, which exhibits a record-fast response (rising time ~17 ns) and a high responsivity (~$3\times10^4$ A/W at 635 nm and 16.8 nW illumination) across the broad spectral range. We demonstrate that the photo-excited carriers generated in silicon are transferred into graphene through a tunneling process rather than carrier drift. The atomically thin MoS2 film not only serves as tunneling layer but also passivates surface states, which in combination delivers a superior response speed (~3 order of magnitude improved than a device without MoS2 layer), while the responsivity remains high. This intriguing tunneling photoconductor integrates both fast response and high responsivity and thus has significant potential in practical applications of optoelectronic devices. △ Less

Submitted 14 July, 2017; v1 submitted 22 May, 2017; originally announced May 2017.

Comments: 30 pages, 5 figures

Journal ref: npj 2D Materials and Applications, 1, 19 (2017)

Distribution uniformity of laser-accelerated proton beams

Authors: J. G. Zhu, K. Zhu, L. Tao, X. H. Xu, C. Lin, W. J. Ma, H. Y. Lu, Y. Y. Zhao, Y. R. Lu, J. E. Chen, X. Q. Yan

Abstract: Compared with conventional accelerators, laser plasma accelerators can generate high energy ions at a greatly reduced scale, due to their TV/m acceleration gradient. A compact laser plasma accelerator (CLAPA) has been built at the Institute of Heavy Ion Physics at Peking University. It will be used for applied research like biological irradiation, astrophysics simulations, etc. A beamline system w… ▽ More Compared with conventional accelerators, laser plasma accelerators can generate high energy ions at a greatly reduced scale, due to their TV/m acceleration gradient. A compact laser plasma accelerator (CLAPA) has been built at the Institute of Heavy Ion Physics at Peking University. It will be used for applied research like biological irradiation, astrophysics simulations, etc. A beamline system with multiple quadrupoles and an analyzing magnet for laser-accelerated ions is proposed here. Since laser-accelerated ion beams have broad energy spectra and large angular divergence, the parameters (beam waist position in the Y direction, beam line layout, drift distance, magnet angles etc.) of the beamline system are carefully designed and optimised to obtain a radially symmetric proton distribution at the irradiation platform. Requirements of energy selection and differences in focusing or defocusing in application systems greatly influence the evolution of proton distributions. With optimal parameters, radially symmetric proton distributions can be achieved and protons with different energy spread within 5% have similar transverse areas at the experiment target. △ Less

Submitted 14 October, 2017; v1 submitted 10 February, 2017; originally announced February 2017.

Multi-scale turbulence modeling and maximum information principle. Part 4

Authors: L. Tao

Abstract: We explore incompressible homogeneous isotropic turbulence within the (fourth-order model) formulation of optimal control and optimization, in contrast to the classical works of Proudman and Reid (1954) and Tatsumi (1957), with the intention to fix specially their defect of negative energy spectrum values being developed and to examine generally the conventional closure schemes. The isotropic form… ▽ More We explore incompressible homogeneous isotropic turbulence within the (fourth-order model) formulation of optimal control and optimization, in contrast to the classical works of Proudman and Reid (1954) and Tatsumi (1957), with the intention to fix specially their defect of negative energy spectrum values being developed and to examine generally the conventional closure schemes. The isotropic forms for the general and spatially degenerated fourth order correlations of fluctuating velocity are obtained and the corresponding primary dynamical equations are derived. The degenerated fourth order correlation contains four scalar functions $D_i$, $i=1,2,3,4$, whose determination is the focus of closure. We discuss the constraints of equality for these functions as required by the self-consistency of the definition of the degenerated. Furthermore, we develop the constraints of inequality for the scalar functions based on the application of the Cauchy-Schwarz inequality, the non-negativity of the variance of products, and the non-negativity of the turbulent energy spectrum. We intend to indicate the difficulty for a conventional scheme to satisfy all these constraints. As an alternative, we employ the turbulent energy per unit volume as the objective function to be maximized, under the constraints and the dynamical equations, with the four scalar functions as the control variables, which is a second-order cone programming problem. We then treat the asymptotic state solutions at large time and focus especially on the sub-model where the third order correlation is taken as the control variable, considering the computing resources available. △ Less

Submitted 9 December, 2015; v1 submitted 6 September, 2015; originally announced September 2015.

Comments: 33 pages

MSC Class: 76F02; 76F05; 76F55; 35Q35; 35Q93; 90C06; 90C22; 90C25; 90C30; 90C90

Homogeneous shear turbulence as a second-order cone program

Authors: Luoyi Tao

Abstract: To help resolve issues of non-realizability and restriction to homogeneity faced by analytical theories of turbulence, we explore three-dimensional homogeneous shear turbulence of incompressible Newtonian fluids via optimal control and convex optimization. The framework is composed of multi-point spatial correlations of velocity and pressure fluctuations up to the degenerate fourth order, their ev… ▽ More To help resolve issues of non-realizability and restriction to homogeneity faced by analytical theories of turbulence, we explore three-dimensional homogeneous shear turbulence of incompressible Newtonian fluids via optimal control and convex optimization. The framework is composed of multi-point spatial correlations of velocity and pressure fluctuations up to the degenerate fourth order, their evolution equations and constraints. The integral of trace of the second order correlations is argued as the objective functional to be maximized. The sources of the constraints are discussed like the Cauchy-Schwarz inequality and the non-negativity of variance of products (NNVP). Two models are defined: the second-order model uses the contracted and degenerate third order correlations as control variables; the third-order model takes the degenerate fourth order correlations as control variables. Both are second-order cone programs. Computation of large-scale and huge-scale and link to big data are noted. The exponential growth rates of the asymptotic states are bounded from above by zero. The steady state of the second-order model is solved. Three finite macro length scales are predicted beyond which the two-point correlations are negligible. The predicted values of the anisotropy tensor are consistent with experimental data qualitatively (concerning the relative numerical order of the diagonal components), albeit with large quantitative differences attributed to the non-enforceability of NNVP within the model. Compared with DNS data, the predicted second order correlation functions contain flawed features of local minima too large in magnitude or present spuriously. The third-order model is expected to improve predictions, owing to its ability to include constraints from NNVP and its formulation in an enlarged control variable space. It is yet open how to solve this huge-scale problem. △ Less

Submitted 29 August, 2020; v1 submitted 2 August, 2014; originally announced August 2014.

Comments: 39 pages, 3 figures. Maximization of objective substantiated from the strong mixing of physical turbulence. Discussion added about challenges faced by DNS in homogeneous shear turbulence. For steady state of the second-order model, computational domain in physical space enlarged, the predicated distributions of the second order correlation functions presented and compared with DNS data

MSC Class: 76F02; 76F05; 76F10; 76F55; 35Q35; 35Q93; 90C06; 90C22; 90C25; 90C30; 90C90

Multi-scale turbulence modeling and maximum information principle. Part 2

Authors: L. Tao, M. Ramakrishna

Abstract: We consider two-dimensional homogeneous shear turbulence within the context of optimal control, a multi-scale turbulence model containing the fluctuation velocity and pressure correlations up to the fourth order; The model is formulated on the basis of the Navier-Stokes equations, Reynolds average, the constraints of inequality from both physical and mathematical considerations, the turbulent ener… ▽ More We consider two-dimensional homogeneous shear turbulence within the context of optimal control, a multi-scale turbulence model containing the fluctuation velocity and pressure correlations up to the fourth order; The model is formulated on the basis of the Navier-Stokes equations, Reynolds average, the constraints of inequality from both physical and mathematical considerations, the turbulent energy density as the objective to be maximized, and the fourth order correlations as the control variables. Without imposing the maximization and the constraints, the resultant equations of motion in the Fourier wave number space are formally solved to obtain the transient state solutions, the asymptotic state solutions and the evolution of a transient toward an asymptotic under certain conditions. The asymptotic state solutions are characterized by the dimensionless exponential time rate of growth $2σ$ which has an upper bound of $2σ_{\max}$ = 0; The asymptotic solutions can be obtained from a linear objective convex programming. For the asymptotic state solutions of the reduced model containing the correlations up to the third order, the optimal control problem reduces to linear programming with the primary component of the third order correlations or a related integral quantity as the control variable; the supports of the second and third order correlations are estimated for the sake of numerical simulation; the existence of feasible solutions is demonstrated when the related quantity is the control variable. The relevance of the formulation to flow stability analysis is suggested. △ Less

Submitted 7 January, 2014; v1 submitted 18 July, 2013; originally announced July 2013.

Comments: 58 pages, 4 figures, Document updated: Mathematical arguments included to show the convexity of the quadratic constraints. A new set of constraints of inequality added, which requires that the maximum exponential growth rate in the asymptotic state be zero. In the case of the asymptotic state solutions for the reduced model, feasible solutions are shown to be existent. Other minor corrections

MSC Class: 76F02; 76F05; 76F55; 76E99; 90C05; 90C25; 90C30; 49N90

Uniform wafer-scale synthesis of graphene on evaporated Cu (111) film with quality comparable to exfoliated monolayer

Authors: Li Tao, Milo Holt, Jongho Lee, Harry Chou, Stephen J. McDonnell, Domingo A. Ferrer, Matias Babenco, Robert M. Wallace, Sanjay K. Banerjee, Rodney S. Ruoff, Deji Akinwande

Abstract: Monolayer graphene has been grown on crystallized Cu (111) films on standard oxidized Si 100 mm wafers. The monolayer graphene demonstrates high uniformity (>97% coverage), with immeasurable defects (>95% defect-negligible) across the entire wafer. Key to these results is the phase transition of evaporated copper films from amorphous to crystalline at the growth temperature as corroborated by X-ra… ▽ More Monolayer graphene has been grown on crystallized Cu (111) films on standard oxidized Si 100 mm wafers. The monolayer graphene demonstrates high uniformity (>97% coverage), with immeasurable defects (>95% defect-negligible) across the entire wafer. Key to these results is the phase transition of evaporated copper films from amorphous to crystalline at the growth temperature as corroborated by X-ray diffraction and electron backscatter diffraction. Noticeably, phase transition of copper film is observed on technologically ubiquitous oxidized Si wafer where the oxide is a standard amorphous thermal oxide. Ion mass spectroscopy indicates that the copper films can be purposely hydrogen-enriched during a hydrogen anneal which subsequently affords graphene growth with a sole carbonaceous precursor for low defect densities. Owing to the strong hexagonal lattice match, the graphene domains align to the Cu (111) domains, suggesting a pathway for increasing the graphene grains by maximizing the copper grain sizes. Fabricated graphene transistors on a flexible polyimide film yield a peak carrier mobility ~4,930 cm2/Vs. △ Less

Submitted 7 May, 2012; originally announced May 2012.

Photo-electron momentum spectra from minimal volumes: the time-dependent surface flux method

Authors: Liang Tao, Armin Scrinzi

Abstract: The time-dependent surface flux (t-SURFF) method is introduced for computing of strong-field infrared photo-ionization spectra of atoms by numerically solving the time-dependent Schrödinger equation on minimal simulation volumes. The volumes only need to accommodate the electron quiver motion and the relevant range of the atomic binding potential. Spectra are computed from the electron flux throug… ▽ More The time-dependent surface flux (t-SURFF) method is introduced for computing of strong-field infrared photo-ionization spectra of atoms by numerically solving the time-dependent Schrödinger equation on minimal simulation volumes. The volumes only need to accommodate the electron quiver motion and the relevant range of the atomic binding potential. Spectra are computed from the electron flux through a surface, beyond which the outgoing flux is absorbed by infinite range exterior complex scaling (irECS). Highly accurate infrared photo-electron spectra are calculated in single active electron approximation and compared to literature results. Detailed numerical evidence for performance and accuracy is given. Extensions to multi-electron systems and double ionization are discussed. △ Less

Submitted 19 September, 2011; originally announced September 2011.

Comments: 18 pages, 5 figures

Multi-scale turbulence modeling and maximum information principle. Part 1

Authors: L. Tao, M. Ramakrishna

Abstract: We discuss averaged turbulence modeling of multi-scales of length for an incompressible Newtonian fluid, with the help of the maximum information principle. We suppose that there exists a function basis to decompose the turbulent fluctuations in a flow of our concern into the components associated with various spatial scales and that there is a probability density function $\pdf$ of these fluctuat… ▽ More We discuss averaged turbulence modeling of multi-scales of length for an incompressible Newtonian fluid, with the help of the maximum information principle. We suppose that there exists a function basis to decompose the turbulent fluctuations in a flow of our concern into the components associated with various spatial scales and that there is a probability density function $\pdf$ of these fluctuation components. The unbiased form for $\pdf$ is determined and the turbulence model is closed, with the multi-scale correlations up to the fourth order, through maximizing the information under the constraints of equality and inequality for that flow. Due to the computational difficulty to maximize the information, a closely related but simple alternative objective is sought, like the determinant or the trace of the second order correlations of the turbulent flow. Some preliminary results and implications from the application to homogeneous turbulence are presented. Some issues yet to be resolved are indicated. △ Less

Submitted 9 September, 2010; originally announced September 2010.

MSC Class: 76F02; 76F05; 76F55

Development of a cavity ring-down spectroscopy sensor for boron nitride sputter erosion in Hall thrusters

Authors: Lei Tao, Naoji Yamamoto, Alec D Gallimore, Azer P Yalin

Abstract: Sputter erosion of boron nitride (BN) is a critically important process in Hall thrusters from the point of view of both lifetime assessment and contamination effects. This contribution describes the development of a laser based sensor for in situ monitoring of sputtered BN from Hall thrusters. We present a continuous-wave cavity ring-down spectroscopy (cw-CRDS) system and its demonstrative measur… ▽ More Sputter erosion of boron nitride (BN) is a critically important process in Hall thrusters from the point of view of both lifetime assessment and contamination effects. This contribution describes the development of a laser based sensor for in situ monitoring of sputtered BN from Hall thrusters. We present a continuous-wave cavity ring-down spectroscopy (cw-CRDS) system and its demonstrative measurement results from BN sputtering experiments. △ Less

Submitted 4 May, 2010; originally announced May 2010.

The effects of degree correlations on network topologies and robustness

Authors: Jing Zhao, Lin Tao, Hong Yu, Jian-Hua Luo, Zhi-Wei Cao, Yi-Xue Li

Abstract: Complex networks have been applied to model numerous interactive nonlinear systems in the real world. Knowledge about network topology is crucial for understanding the function, performance and evolution of complex systems. In the last few years, many network metrics and models have been proposed to illuminate the network topology, dynamics and evolution. Since these network metrics and models d… ▽ More Complex networks have been applied to model numerous interactive nonlinear systems in the real world. Knowledge about network topology is crucial for understanding the function, performance and evolution of complex systems. In the last few years, many network metrics and models have been proposed to illuminate the network topology, dynamics and evolution. Since these network metrics and models derive from a wide range of studies, a systematic study is required to investigate the correlations between them. The present paper explores the effect of degree correlation on the other network metrics through studying an ensemble of graphs where the degree sequence (set of degrees) is fixed. We show that to some extent, the characteristic path length, clustering coefficient, modular extent and robustness of networks are directly influenced by the degree correlation. △ Less

Submitted 20 March, 2007; v1 submitted 7 November, 2006; originally announced November 2006.

Comments: 13 pages, 6 figures

Journal ref: Chinese Physics 2007, 16:3571-3580