-
Correlation between structural and magnetic properties of epitaxial YIG films by pulsed laser deposition
Authors:
José Diogo Costa,
N. Claessens,
Giacomo Talmelli,
Davide Tierno,
F. Amar,
Thibaut Devolder,
Matthijn Dekkers,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
In this study, we investigate the relationships between film growth conditions, crystalline microstructure, and magnetic properties of epitaxial Yttrium Iron Garnet (Y$_3$Fe$_5$O$_{12}$, YIG) thin films, deposited on Gallium Gadolinium Garnet (Ga$_3$Gd$_5$O$_{12}$, GGG). A direct correlation was observed between the residual epitaxial strain, bulk magnetic properties like saturation magnetization…
▽ More
In this study, we investigate the relationships between film growth conditions, crystalline microstructure, and magnetic properties of epitaxial Yttrium Iron Garnet (Y$_3$Fe$_5$O$_{12}$, YIG) thin films, deposited on Gallium Gadolinium Garnet (Ga$_3$Gd$_5$O$_{12}$, GGG). A direct correlation was observed between the residual epitaxial strain, bulk magnetic properties like saturation magnetization and magnetic damping), and the performance of spin-wave transmission devices based on these films. This correlation offers a pathway for a simplified, rapid assessment of YIG film quality, avoiding the need for complex time-consuming characterization techniques. In addition, we report a comprehensive investigation into the influence of pulsed-laser deposition parameters, including deposition temperature, pressure, laser fluence, frequency, and annealing conditions. Through systematic deposition optimization, state-of-the-art YIG films exhibiting ultralow magnetic damping could be obtained, which is critical for high-performance spintronic applications.
△ Less
Submitted 15 January, 2025;
originally announced January 2025.
-
Microwave Properties of Ba-Substituted Pb(Zr$_{0.52}$Ti$_{0.48}$)O$_3$ after Chemical-Mechanical Polishing
Authors:
Federica Luciano,
Lieve Teugels,
Sean McMitchell,
Giacomo Talmelli,
Anaïs Guerenneur,
Renzo Stheins,
Rudy Caluwaerts,
Thierry Conard,
Inge Vaesen,
Stefanie Sergeant,
Pol Van Dorpe,
Stefan De Gendt,
Matthijn Dekkers,
Johan Swerts,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
We have studied the effect of chemical-mechanical polishing (CMP) on the ferroelectric, piezoelectric, and microwave dielectric properties of Ba-substituted PZT (BPZT), deposited by pulsed laser deposition. CMP allowed for the reduction of the root mean square surface roughness of 600 nm thick BPZT films from 12.1nm to 0.79 nm. Ammonium peroxide (SC-1) cleaning was effective to remove Si CMP resid…
▽ More
We have studied the effect of chemical-mechanical polishing (CMP) on the ferroelectric, piezoelectric, and microwave dielectric properties of Ba-substituted PZT (BPZT), deposited by pulsed laser deposition. CMP allowed for the reduction of the root mean square surface roughness of 600 nm thick BPZT films from 12.1nm to 0.79 nm. Ammonium peroxide (SC-1) cleaning was effective to remove Si CMP residuals. Measurements of the ferroelectric hysteresis after CMP indicated that the ferroelectric properties of BPZT were only weakly affected by CMP, while the piezoelectric d33 coefficient and the microwave permittivity were reduced slightly by 10%. This can be attributed to the formation of a thin dead layer at the BPZT surface. Moreover, the intrinsic dielectric permittivity at microwave frequencies between 1 and 25 GHz was not influenced by CMP, whereas the dead layer series capacitance decreased by 10%. The results indicate that the CMP process can be used to smoothen the BPZT surface without affecting the film properties strongly.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
Measuring the dispersion relations of spin wave bands using time-of-flight spectroscopy
Authors:
T. Devolder,
G. Talmelli,
S. M. Ngom,
F. Ciubotaru,
C. Adelmann,
C. Chappert
Abstract:
We develop a generic all-inductive procedure to measure the band structure of spin waves in a magnetic thin stripe. In contrast to existing techniques, our method works even if several spin wave branches coexist in the investigated frequency interval, provided that the branches possess sufficiently different group velocities. We first measure the microwave scattering matrix of a network composed o…
▽ More
We develop a generic all-inductive procedure to measure the band structure of spin waves in a magnetic thin stripe. In contrast to existing techniques, our method works even if several spin wave branches coexist in the investigated frequency interval, provided that the branches possess sufficiently different group velocities. We first measure the microwave scattering matrix of a network composed of distant antennas inductively coupled to the spin wave bath of the magnetic film. After a mathematical transformation to the time-domain to get the transmission impulse response, the different spin wave branches are viewed as wavepackets that reach successively the receiving antenna after different travel times. In analogy with time-of flight spectroscopy, the wavepackets are then separated by time-gating. The time-gated responses are used to recalculate the contribution of each spin wave branch to the frequency domain scattering matrix. The dispersion relation of each branch stems from the absolute phase of the time-gated transmission parameter. The spin wave wavevector can be determined unambiguously if the results for several propagation distances are combined, so as to get the dispersion relations.
△ Less
Submitted 3 June, 2021; v1 submitted 9 April, 2021;
originally announced April 2021.
-
Electrical spin-wave spectroscopy in nanoscale waveguides with nonuniform magnetization
Authors:
Giacomo Talmelli,
Daniele Narducci,
Frederic Vanderveken,
Marc Heyns,
Fernanda Irrera,
Inge Asselberghs,
Iuliana P. Radu,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
Spin waves modes in magnetic waveguides with width down to 320 nm have been studied by electrical propagating spin-wave spectroscopy and micromagnetic simulations for both longitudinal and transverse magnetic bias fields. For longitudinal bias fields, a 1.3 GHz wide spin-wave band was observed in agreement with analytical dispersion relations for uniform magnetization. However, transverse bias fie…
▽ More
Spin waves modes in magnetic waveguides with width down to 320 nm have been studied by electrical propagating spin-wave spectroscopy and micromagnetic simulations for both longitudinal and transverse magnetic bias fields. For longitudinal bias fields, a 1.3 GHz wide spin-wave band was observed in agreement with analytical dispersion relations for uniform magnetization. However, transverse bias field led to several distinct bands, corresponding to different quantized width modes, with both negative and positive slopes. Micromagnetic simulations showed that, in this geometry, the magnetization was nonuniform and tilted due to the strong shape anisotropy of the waveguides. Simulations of the quantized spin-wave modes in such nonuniformly magnetized waveguides resulted in spin wave dispersion relations in good agreement with the experiments.
△ Less
Submitted 27 April, 2021; v1 submitted 28 January, 2021;
originally announced January 2021.
-
Magnonic band structure in vertical meander-shaped CoFeB thin films
Authors:
Gianluca Gubbiotti,
Alexandr Sadovnikov,
Evgeny Beginin,
Sergey Nikitov,
Danny Wan,
Anshul Gupta,
Shreya Kundu,
Giacomo Talmelli,
Robert Carpenter,
Inge Asselberghs,
Iuliana P. Radu,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
The dispersion of spin waves in vertical meander-shaped CoFeB thin films consisting of segments located at 90° angles with respect to each other is investigated by Brillouin light scattering spectroscopy. We reveal the periodic character of several dispersive branches as well as alternating frequency ranges where spin waves are allowed or forbidden to propagate. Noteworthy is the presence of the f…
▽ More
The dispersion of spin waves in vertical meander-shaped CoFeB thin films consisting of segments located at 90° angles with respect to each other is investigated by Brillouin light scattering spectroscopy. We reveal the periodic character of several dispersive branches as well as alternating frequency ranges where spin waves are allowed or forbidden to propagate. Noteworthy is the presence of the frequency band gaps between each couple of successive modes only for wave numbers k=n$π$/a, where n is an even integer number and a is the size of the meander unit cell, whereas the spectra show propagating modes in the orthogonal film segments for the other wavenumbers. The micromagnetic simulations and analytical calculations allow us to understand and explain the results in terms of the mode spatial localization and symmetry. The obtained results demonstrate the wave propagation in three dimensions opening the path for multi-level magnonic architectures for signal processing.
△ Less
Submitted 27 April, 2021; v1 submitted 27 July, 2020;
originally announced July 2020.
-
Backward volume vs Damon-Eshbach: a travelling spin wave spectroscopy comparison
Authors:
U. K. Bhaskar,
G. Talmelli,
F. Ciubotaru,
C. Adelmann,
T. Devolder
Abstract:
We compare the characteristics of electrically transduced Damon-Eshbach (DESWs) and backward volume (BVSWs) configurations within the same, 30 nm thick, ferromagnetic, CoFeB waveguide. Sub-micron U-shaped antennas are used to deliver the necessary in-plane and out-of-plane RF fields. We measure the spin-wave transmission with respect to in-plane field orientation, frequency and propagation distanc…
▽ More
We compare the characteristics of electrically transduced Damon-Eshbach (DESWs) and backward volume (BVSWs) configurations within the same, 30 nm thick, ferromagnetic, CoFeB waveguide. Sub-micron U-shaped antennas are used to deliver the necessary in-plane and out-of-plane RF fields. We measure the spin-wave transmission with respect to in-plane field orientation, frequency and propagation distance. Unlike DESW, BVSWs are reciprocally transduced and collected for either direction of propagation, but their ability to transport energy is lower than DESWs for two reasons. This arises first because BVSW are inductively transduced less efficiently than DESWs. Also, in the range of wavevectors (~5 rad. um-1) typically excited by our antennas, the group velocity of BVSWs stays lower than that of DESW, which leads to reduced propagation ability that impact transmission signals in an exponential manner. In contrast, the group velocity of DESWs is maximum at low fields and decreases continuously with the applied field. The essential features of the measured SW characteristics are well reciprocated by a simple, 1-D analytical model which can be used to assess the potential of each configuration.
△ Less
Submitted 3 June, 2021; v1 submitted 15 January, 2020;
originally announced January 2020.
-
BPZT HBARs for bias-tunable, stress generation at GHz frequencies
Authors:
U. K. Bhaskar,
D. Tierno,
G. Talmelli,
F. Ciubotaru,
C. Adelmann,
T. Devolder
Abstract:
The high frequency performance of strong piezoelectric materials like PZT remains relatively less explored due to the assumption of large dielectric/ferroelectric losses at GHz frequencies. Recently, the advent of magnetoelectric technology as an on-chip route to excite magnetization dynamics has provided the impetus to evaluate the electromechanical performance of PZT at microwave frequencies. In…
▽ More
The high frequency performance of strong piezoelectric materials like PZT remains relatively less explored due to the assumption of large dielectric/ferroelectric losses at GHz frequencies. Recently, the advent of magnetoelectric technology as an on-chip route to excite magnetization dynamics has provided the impetus to evaluate the electromechanical performance of PZT at microwave frequencies. In this work, we demonstrate that HBARs fabricated using Barium-doped PZT (BPZT) films can efficiently generate acoustic waves up to 15 GHz. The ferroelectricity of BPZT endows added functionality to the resonator in the form of voltage tunability of the electromechanical performance. We extract the piezoelectric coefficient by numerically comparing the performance of BPZT with the Mason model. The extracted piezoelectric coefficient ~60 pm/V agrees well with reported values on thin film PZT measured at low frequencies (<100 MHz). Our results suggest that with further improvement in device design and material processing, BPZT resonators could operate as large amplitude, tunable stress transducers at GHz frequencies.
△ Less
Submitted 3 June, 2021; v1 submitted 9 September, 2019;
originally announced September 2019.
-
Reconfigurable sub-micron spin-wave majority gate with electrical transducers
Authors:
Giacomo Talmelli,
Thibaut Devolder,
Nick Träger,
Johannes Förster,
Sebastian Wintz,
Markus Weigand,
Hermann Stoll,
Marc Heyns,
Gisela Schütz,
Iuliana Radu,
Joachim Gräfe,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics…
▽ More
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics is still lacking. Here, we demonstrate a sub-micron inline spin-wave majority gate with fan-out. Time-resolved imaging of the magnetization dynamics by scanning transmission x-ray microscopy illustrates the device operation. All-electrical spin-wave spectroscopy further demonstrates majority gates with sub-micron dimensions, reconfigurable input and output ports, and frequency-division multiplexing. Challenges for hybrid spintronic computing systems based on spin-wave majority gates are discussed.
△ Less
Submitted 3 September, 2021; v1 submitted 7 August, 2019;
originally announced August 2019.
-
Experimental Realization of a Passive GHz Frequency-Division Demultiplexer for Magnonic Logic Networks
Authors:
Frank Heussner,
Giacomo Talmelli,
Moritz Geilen,
Björn Heinz,
Thomas Brächer,
Thomas Meyer,
Florin Ciubotaru,
Christoph Adelmann,
Kei Yamamoto,
Alexander A. Serga,
Burkard Hillebrands,
Philipp Pirro
Abstract:
The emerging field of magnonics employs spin waves and their quanta, magnons, to implement wave-based computing on the micro- and nanoscale. Multi-frequency magnon networks would allow for parallel data processing within single logic elements whereas this is not the case with conventional transistor-based electronic logic. However, a lack of experimentally proven solutions to efficiently combine a…
▽ More
The emerging field of magnonics employs spin waves and their quanta, magnons, to implement wave-based computing on the micro- and nanoscale. Multi-frequency magnon networks would allow for parallel data processing within single logic elements whereas this is not the case with conventional transistor-based electronic logic. However, a lack of experimentally proven solutions to efficiently combine and separate magnons of different frequencies has impeded the intensive use of this concept. In this Letter, the experimental realization of a spin-wave demultiplexer enabling frequency-dependent separation of magnonic signals in the GHz range is demonstrated. The device is based on two-dimensional magnon transport in the form of spin-wave beams in unpatterned magnetic films. The intrinsic frequency-dependence of the beam direction is exploited to realize a passive functioning obviating an external control and additional power consumption. This approach paves the way to magnonic multiplexing circuits enabling simultaneous information transport and processing.
△ Less
Submitted 6 September, 2021; v1 submitted 29 April, 2019;
originally announced April 2019.
