-
Ab-initio simulation of excited-state potential energy surfaces with transferable deep quantum Monte Carlo
Authors:
Zeno Schätzle,
P. Bernát Szabó,
Alice Cuzzocrea,
Frank Noé
Abstract:
The accurate quantum chemical calculation of excited states is a challenging task, often requiring computationally demanding methods. When entire ground and excited potential energy surfaces (PESs) are desired, e.g., to predict the interaction of light excitation and structural changes, one is often forced to use cheaper computational methods at the cost of reduced accuracy. Here we introduce a no…
▽ More
The accurate quantum chemical calculation of excited states is a challenging task, often requiring computationally demanding methods. When entire ground and excited potential energy surfaces (PESs) are desired, e.g., to predict the interaction of light excitation and structural changes, one is often forced to use cheaper computational methods at the cost of reduced accuracy. Here we introduce a novel method for the geometrically transferable optimization of neural network wave functions that leverages weight sharing and dynamical ordering of electronic states. Our method enables the efficient prediction of ground and excited-state PESs and their intersections at the highest accuracy, demonstrating up to two orders of magnitude cost reduction compared to single-point calculations. We validate our approach on three challenging excited-state PESs, including ethylene, the carbon dimer, and the methylenimmonium cation, indicating that transferable deep-learning QMC can pave the way towards highly accurate simulation of excited-state dynamics.
△ Less
Submitted 25 March, 2025;
originally announced March 2025.
-
Deep quantum Monte Carlo approach for polaritonic chemistry
Authors:
Yifan Tang,
Gian Marcello Andolina,
Alica Cuzzocrea,
Matěj Mezera,
P. Bernát Szabó,
Zeno Schätzle,
Frank Noé,
Paolo A. Erdman
Abstract:
Recent years have witnessed a surge of experimental and theoretical interest in controlling the properties of matter, such as its chemical reactivity, by confining it in optical cavities, where the enhancement of the light-matter coupling strength leads to the creation of hybrid light-matter states known as polaritons. However, ab initio calculations that account for the quantum nature of both the…
▽ More
Recent years have witnessed a surge of experimental and theoretical interest in controlling the properties of matter, such as its chemical reactivity, by confining it in optical cavities, where the enhancement of the light-matter coupling strength leads to the creation of hybrid light-matter states known as polaritons. However, ab initio calculations that account for the quantum nature of both the electromagnetic field and matter are challenging and have only started to be developed in recent years. We introduce a deep learning variational quantum Monte Carlo method to solve the electronic and photonic Schrödinger equation of molecules trapped in optical cavities. We extend typical electronic neural network wavefunction ansatzes to describe joint fermionic and bosonic systems, i.e. electron-photon systems, in a quantum Monte Carlo framework. We apply our method to hydrogen molecules in a cavity, computing both ground and excited states. We assess their energy, dipole moment, charge density shift due to the cavity, the state of the photonic field, and the entanglement developed between the electrons and photons. When possible, we compare our results with more conventional quantum chemistry methods proposed in the literature, finding good qualitative agreement, thus extending the range of scientific problems that can be tackled using machine learning techniques.
△ Less
Submitted 19 March, 2025;
originally announced March 2025.
-
Sputter Yields of the Lunar Surface: Experimental Validation and Numerical Modelling of Solar Wind Sputtering of Apollo 16 Soils
Authors:
Johannes Brötzner,
Herbert Biber,
Paul Stefan Szabo,
Noah Jäggi,
Lea Fuchs,
Andreas Nenning,
Martina Fellinger,
Gyula Nagy,
Eduardo Pitthan,
Daniel Primetzhofer,
Andreas Mutzke,
Richard Arthur Wilhelm,
Peter Wurz,
André Galli,
Friedrich Aumayr
Abstract:
Sputtering by solar wind ions is a key process driving the ejection of high-energy particles into the exospheres of airless bodies like asteroids, Mercury and the Moon. In view of upcoming missions which will deliver new in-situ data on these exospheres like the Artemis program at the Moon and BepiColombo at Mercury, a deeper understanding of sputtering effects is crucial. In this work, we combine…
▽ More
Sputtering by solar wind ions is a key process driving the ejection of high-energy particles into the exospheres of airless bodies like asteroids, Mercury and the Moon. In view of upcoming missions which will deliver new in-situ data on these exospheres like the Artemis program at the Moon and BepiColombo at Mercury, a deeper understanding of sputtering effects is crucial. In this work, we combine sensitive quartz crystal microbalance measurements and numerical simulations to quantify sputter yields of Apollo soil 68501 under solar wind relevant conditions. We find that none of the commonly used simulation codes can reliably predict laboratory sputter yields without experimental benchmarks. All of the employed packages significantly overestimate the sputter yields of flat samples by at least a factor of 2 for the case of hydrogen. When accounting for surface roughness and regolith-like porosity, sputter yields are decreased even further to 7.3E-3 atoms\ion and 7.6E-2 atoms\ion for H and He at solar wind energies of 1 keV\amu, respectively. The reduced yields of porous regolith structures are largely independent of the ion incidence angle, making them applicable across a wide range of lunar latitudes. This study highlights the need for experimental validation of sputtering models to ensure accurate predictions for space weathering and lunar exosphere composition.
△ Less
Submitted 18 October, 2024;
originally announced October 2024.
-
Highly Accurate Real-space Electron Densities with Neural Networks
Authors:
Lixue Cheng,
P. Bernát Szabó,
Zeno Schätzle,
Derk P. Kooi,
Jonas Köhler,
Klaas J. H. Giesbertz,
Frank Noé,
Jan Hermann,
Paola Gori-Giorgi,
Adam Foster
Abstract:
Variational ab-initio methods in quantum chemistry stand out among other methods in providing direct access to the wave function. This allows in principle straightforward extraction of any other observable of interest, besides the energy, but in practice this extraction is often technically difficult and computationally impractical. Here, we consider the electron density as a central observable in…
▽ More
Variational ab-initio methods in quantum chemistry stand out among other methods in providing direct access to the wave function. This allows in principle straightforward extraction of any other observable of interest, besides the energy, but in practice this extraction is often technically difficult and computationally impractical. Here, we consider the electron density as a central observable in quantum chemistry and introduce a novel method to obtain accurate densities from real-space many-electron wave functions by representing the density with a neural network that captures known asymptotic properties and is trained from the wave function by score matching and noise-contrastive estimation. We use variational quantum Monte Carlo with deep-learning ansätze (deep QMC) to obtain highly accurate wave functions free of basis set errors, and from them, using our novel method, correspondingly accurate electron densities, which we demonstrate by calculating dipole moments, nuclear forces, contact densities, and other density-based properties.
△ Less
Submitted 1 November, 2024; v1 submitted 2 September, 2024;
originally announced September 2024.
-
An improved penalty-based excited-state variational Monte Carlo approach with deep-learning ansatzes
Authors:
P. Bernát Szabó,
Zeno Schätzle,
Mike T. Entwistle,
Frank Noé
Abstract:
We introduce several improvements to the penalty-based variational quantum Monte Carlo (VMC) algorithm for computing electronic excited states of Entwistle $\textit{et al.}$ [M. T. Entwistle $\textit{et al.}$, Nat. Commun. $\textbf{14}$, 274 (2023)], and demonstrate that the accuracy of the updated method is competitive with other available excited-state VMC approaches. A theoretical comparison of…
▽ More
We introduce several improvements to the penalty-based variational quantum Monte Carlo (VMC) algorithm for computing electronic excited states of Entwistle $\textit{et al.}$ [M. T. Entwistle $\textit{et al.}$, Nat. Commun. $\textbf{14}$, 274 (2023)], and demonstrate that the accuracy of the updated method is competitive with other available excited-state VMC approaches. A theoretical comparison of the computational aspects of these algorithms is presented, where several benefits of the penalty-based method are identified. Our main contributions include an automatic mechanism for tuning the scale of the penalty terms, an updated form of the overlap penalty with proven convergence properties, and a new term that penalizes the spin of the wave function, enabling the selective computation of states with a given spin. With these improvements, along with the use of the latest self-attention-based ansatz, the penalty-based method achieves a mean absolute error below 1 kcal/mol for the vertical excitation energies of a set of 26 atoms and molecules, without relying on variance matching schemes. Considering excited states along the dissociation of the carbon dimer, the accuracy of the penalty-based method is on par with that of natural-excited-state (NES) VMC, while also providing results for larger sections of the potential energy surface. Additionally, the accuracy of the original penalty-based method is improved for a conical intersection of ethylene, with the predicted angle of the intersection agreeing well with both NES-VMC and multi-reference configuration interaction.
△ Less
Submitted 20 September, 2024; v1 submitted 27 May, 2024;
originally announced May 2024.
-
Solar-Energetic-Particle Track-Production Rates at 1 au: Comparing In-situ Particle Fluxes with Lunar Sample-Derived Track Densities
Authors:
A. R. Poppe,
P. S. Szabo,
E. R. Imata,
L. P. Keller,
R. Christoffersen
Abstract:
Heavy (Z>26) solar energetic particles (SEPs) with energies ~1 MeV/nucleon are known to leave visible damage tracks in meteoritic materials. The density of such solar flare tracks in lunar and asteroidal samples has been used as a measure of a sample's exposure time to space, yielding critical information on planetary space weathering rates, the dynamics and lifetimes of interplanetary dust grains…
▽ More
Heavy (Z>26) solar energetic particles (SEPs) with energies ~1 MeV/nucleon are known to leave visible damage tracks in meteoritic materials. The density of such solar flare tracks in lunar and asteroidal samples has been used as a measure of a sample's exposure time to space, yielding critical information on planetary space weathering rates, the dynamics and lifetimes of interplanetary dust grains, and the long-term history of solar particle fluxes. Knowledge of the SEP track accumulation rate in planetary materials at 1 au is critical for properly interpreting observed track densities. Here, we use in-situ particle observations of the 0.50-3.0 MeV/nuc Fe-group SEP flux taken by NASA's Advanced Composition Explorer (ACE) to calculate a flux of track-inducing particles at 1 au of 6.0x10^5 /cm2/yr/str. Using the observed energy spectrum of Fe-group SEPs, we find that the depth distribution of SEP-induced damage tracks inferred from ACE measurements matches closely to that recently measured in lunar sample 64455; however, the magnitude of the ACE-inferred rate is approximately 25x higher than that observed in the lunar sample. We discuss several hypotheses for the nature of this discrepancy, including inefficiencies in track formation, thermal annealing of lunar samples, erosion via space weathering processing, and variations in the SEP flux at the Moon, yet find no satisfactory explanation. We encourage further research on both the nature of SEP track formation in meteoritic materials and the flux of Fe-group SEPs at the lunar surface in recent and geologic times to resolve this discrepancy.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Linear-scaling local natural orbital CCSD(T) approach for open-shell systems: algorithm, benchmarks, and large-scale applications
Authors:
P. Bernát Szabó,
József Csóka,
Mihály Kállay,
Péter R. Nagy
Abstract:
The extension of the highly-optimized local natural orbital (LNO) CCSD(T) method is presented for high-spin open-shell molecules. The techniques enabling the outstanding efficiency of the closed-shell LNO-CCSD(T) variant are adopted, including the iteration- and redundancy-free MP2 and (T) formulations, as well as the integral-direct, memory- and disk use economic, and OpenMP-parallel algorithms.…
▽ More
The extension of the highly-optimized local natural orbital (LNO) CCSD(T) method is presented for high-spin open-shell molecules. The techniques enabling the outstanding efficiency of the closed-shell LNO-CCSD(T) variant are adopted, including the iteration- and redundancy-free MP2 and (T) formulations, as well as the integral-direct, memory- and disk use economic, and OpenMP-parallel algorithms. For large molecules, the efficiency of our open-shell LNO-CCSD(T) method approaches that of its closed-shell parent method due to a novel approximation for higher-order long-range spin-polarization effects. The accuracy of open-shell LNO-CCSD(T) is extensively tested for radicals and reactions thereof, ionization processes, as well as spin-state splittings and transition-metal compounds. At the size range, where the canonical CCSD(T) reference is accessible (up to 20-30 atoms) the average open-shell LNO-CCSD(T) correlation energies are found to be 99.9-99.95% accurate, which translates into average absolute deviations of a few tenth of a kcal/mol in the investigated energy differences already with the default settings. This enables the accurate modeling of large systems with complex electronic structure, as illustrated on open-shell organic radicals and transition metal complexes of up to 179 atoms, as well as on challenging biochemical systems, including up to 601 atoms and 11,000 basis functions. While the protein models involve difficulties for local approximations, such as the spin states of a bounded iron ion or an extremely delocalized singly occupied orbital, the corresponding single-node LNO-CCSD(T) computations were feasible in a matter of days with 10s to a 100 GB of memory use. Therefore, the new LNO-CCSD(T) implementation enables highly-accurate computations for open-shell systems of unprecedented size and complexity with widely accessible hardware.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Bringing Spatial Interaction Measures into Multi-Criteria Assessment of Redistricting Plans Using Interactive Web Mapping
Authors:
Jacob Kruse,
Song Gao,
Yuhan Ji,
Daniel P. Szabo,
Kenneth Mayer
Abstract:
Redistricting is the process by which electoral district boundaries are drawn, and a common normative assumption in this process is that districts should be drawn so as to capture coherent communities of interest (COIs). While states rely on various proxies for community illustration, such as compactness metrics and municipal split counts, to guide redistricting, recent legal challenges and schola…
▽ More
Redistricting is the process by which electoral district boundaries are drawn, and a common normative assumption in this process is that districts should be drawn so as to capture coherent communities of interest (COIs). While states rely on various proxies for community illustration, such as compactness metrics and municipal split counts, to guide redistricting, recent legal challenges and scholarly works have shown the failings of such proxy measures and the difficulty of balancing multiple criteria in district plan creation. To address these issues, we propose the use of spatial interaction communities to directly quantify the degree to which districts capture the underlying COIs. Using large-scale human mobility flow data, we condense spatial interaction community capture for a set of districts into a single number, the interaction ratio (IR), which can be used for redistricting plan evaluation. To compare the IR to traditional redistricting criteria (compactness and fairness), and to explore the range of IR values found in valid districting plans, we employ a Markov chain-based regionalization algorithm (ReCom) to produce ensembles of valid plans, and calculate the degree to which they capture spatial interaction communities. Furthermore, we propose two methods for biasing the ReCom algorithm towards different IR values. We perform a multi-criteria assessment of the space of valid maps, and present the results in an interactive web map. The experiments on Wisconsin congressional districting plans demonstrate the effectiveness of our methods for biasing sampling towards higher or lower IR values. Furthermore, the analysis of the districts produced with these methods suggests that districts with higher IR and compactness values tend to produce district plans that are more proportional with regards to seats allocated to each of the two major parties.
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
New compound and hybrid binding energy sputter model for modeling purposes in agreement with experimental data
Authors:
Noah Jäggi,
Andreas Mutzke,
Herbert Biber,
Johannes Brötzner,
Paul Stefan Szabo,
Friedrich Aumayr,
Peter Wurz,
André Galli
Abstract:
Rocky planets and moons experiencing solar wind sputtering are continuously supplying their enveloping exosphere with ejected neutral atoms. To understand the quantity and properties of the ejecta, well established Binary Collision Approximation Monte Carlo codes like TRIM with default settings are used predominantly. Improved models such as SDTrimSP have come forward and together with new experim…
▽ More
Rocky planets and moons experiencing solar wind sputtering are continuously supplying their enveloping exosphere with ejected neutral atoms. To understand the quantity and properties of the ejecta, well established Binary Collision Approximation Monte Carlo codes like TRIM with default settings are used predominantly. Improved models such as SDTrimSP have come forward and together with new experimental data the underlying assumptions have been challenged. We introduce a hybrid model, combining the previous surface binding approach with a new bulk binding model akin to Hofsäss & Stegmaier (2023). In addition, we expand the model implementation by distinguishing between free and bound components sourced from mineral compounds such as oxides or sulfides. The use of oxides and sulfides also enables the correct setting of the mass densities of minerals, which was previously limited to the manual setting of individual atomic densities of elements. All of the energies and densities used are thereby based on tabulated data, so that only minimal user input and no fitting of parameters are required. We found unprecedented agreement between the newly implemented hybrid model and previously published sputter yields for incidence angles up to 45° from surface normal. Good agreement is found for the angular distribution of mass sputtered from enstatite MgSiO$_3$ compared to latest experimental data. Energy distributions recreate trends of experimental data of oxidized metals. Similar trends are to be expected from future mineral experimental data. The model thus serves its purpose of widespread applicability and ease of use for modelers of rocky body exospheres.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics
Authors:
J. Aalbers,
K. Abe,
V. Aerne,
F. Agostini,
S. Ahmed Maouloud,
D. S. Akerib,
D. Yu. Akimov,
J. Akshat,
A. K. Al Musalhi,
F. Alder,
S. K. Alsum,
L. Althueser,
C. S. Amarasinghe,
F. D. Amaro,
A. Ames,
T. J. Anderson,
B. Andrieu,
N. Angelides,
E. Angelino,
J. Angevaare,
V. C. Antochi,
D. Antón Martin,
B. Antunovic,
E. Aprile,
H. M. Araújo
, et al. (572 additional authors not shown)
Abstract:
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut…
▽ More
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Polyatomic radiative association by quasiclassical trajectory calculations: Cross section for the formation of HCN molecules in H + CN collisions
Authors:
Péter Szabó,
Magnus Gustafsson
Abstract:
We have developed the polyatomic extension of a recently established (M. Gustafsson, J. Chem. Phys, 138, 074308 (2013)) classical theory of radiative association in the absence of electronic transitions. The cross section of the process is calculated by a quasiclassical trajectory method combined with the classical Larmor formula which can provide the radiated power in collisions. We have also pro…
▽ More
We have developed the polyatomic extension of a recently established (M. Gustafsson, J. Chem. Phys, 138, 074308 (2013)) classical theory of radiative association in the absence of electronic transitions. The cross section of the process is calculated by a quasiclassical trajectory method combined with the classical Larmor formula which can provide the radiated power in collisions. We have also proposed a double-layered Monte Carlo scheme for efficient computation of ro-vibrationally quantum state resolved cross sections for radiative association. Besides the method development, we also calculated and fitted the global potential energy and dipole surface for the H + CN collisions to test our polyatomic semiclassical method.
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
Four-Dimensional Scaling of Dipole Polarizability in Quantum Systems
Authors:
Peter Szabo,
Szabolcs Goger,
Jorge Charry,
Mohammad Reza Karimpour,
Dmitry V. Fedorov,
Alexandre Tkatchenko
Abstract:
Polarizability is a key response property of physical and chemical systems, which has an impact on intermolecular interactions, spectroscopic observables, and vacuum polarization. The calculation of polarizability for quantum systems involves an infinite sum over all excited (bound and continuum) states, concealing the physical interpretation of polarization mechanisms and complicating the derivat…
▽ More
Polarizability is a key response property of physical and chemical systems, which has an impact on intermolecular interactions, spectroscopic observables, and vacuum polarization. The calculation of polarizability for quantum systems involves an infinite sum over all excited (bound and continuum) states, concealing the physical interpretation of polarization mechanisms and complicating the derivation of efficient response models. Approximate expressions for the dipole polarizability, $α$, rely on different scaling laws $α\propto$ $R^3$, $R^4$, or $R^7$, for various definitions of the system radius $R$. Here, we consider a range of single-particle quantum systems of varying spatial dimensionality and having qualitatively different spectra, demonstrating that their polarizability follows a universal four-dimensional scaling law $α= C (4 μq^2/\hbar^2)L^4$, where $μ$ and $q$ are the (effective) particle mass and charge, $C$ is a dimensionless excitation-energy ratio, and the characteristic length $L$ is defined via the $\mathcal{L}^2$-norm of the position operator. %The applicability of this unified formula is demonstrated by accurately predicting the dipole polarizability of 36 atoms and 1641 small organic~molecules. This unified formula is also applicable to many-particle systems, as shown by} accurately predicting the dipole polarizability of 36 atoms, 1641 small organic \rrr{molecules, and Bloch electrons in periodic systems.
△ Less
Submitted 23 January, 2022; v1 submitted 22 October, 2020;
originally announced October 2020.
-
Solar Neutrino Detection Sensitivity in DARWIN via Electron Scattering
Authors:
J. Aalbers,
F. Agostini,
S. E. M. Ahmed Maouloud,
M. Alfonsi,
L. Althueser,
F. Amaro,
J. Angevaare,
V. C. Antochi,
B. Antunovic,
E. Aprile,
L. Arazi,
F. Arneodo,
M. Balzer,
L. Baudis,
D. Baur,
M. L. Benabderrahmane,
Y. Biondi,
A. Bismark,
C. Bourgeois,
A. Breskin,
P. A. Breur,
A. Brown,
E. Brown,
S. Brünner,
G. Bruno
, et al. (141 additional authors not shown)
Abstract:
We detail the sensitivity of the liquid xenon (LXe) DARWIN observatory to solar neutrinos via elastic electron scattering. We find that DARWIN will have the potential to measure the fluxes of five solar neutrino components: $pp$, $^7$Be, $^{13}$N, $^{15}$O and $pep$. The precision of the $^{13}$N, $^{15}$O and $pep$ components is hindered by the double-beta decay of $^{136}$Xe and, thus, would ben…
▽ More
We detail the sensitivity of the liquid xenon (LXe) DARWIN observatory to solar neutrinos via elastic electron scattering. We find that DARWIN will have the potential to measure the fluxes of five solar neutrino components: $pp$, $^7$Be, $^{13}$N, $^{15}$O and $pep$. The precision of the $^{13}$N, $^{15}$O and $pep$ components is hindered by the double-beta decay of $^{136}$Xe and, thus, would benefit from a depleted target. A high-statistics observation of $pp$ neutrinos would allow us to infer the values of the weak mixing angle, $\sin^2θ_w$, and the electron-type neutrino survival probability, $P_e$, in the electron recoil energy region from a few keV up to 200 keV for the first time, with relative precision of 5% and 4%, respectively, at an exposure of 300 ty. An observation of $pp$ and $^7$Be neutrinos would constrain the neutrino-inferred solar luminosity down to 0.2%. A combination of all flux measurements would distinguish between the high (GS98) and low metallicity (AGS09) solar models with 2.1-2.5$σ$ significance, independent of external measurements from other experiments or a measurement of $^8$B neutrinos through coherent elastic neutrino-nucleus scattering in DARWIN. Finally, we demonstrate that with a depleted target DARWIN may be sensitive to the neutrino capture process of $^{131}$Xe.
△ Less
Submitted 20 December, 2020; v1 submitted 4 June, 2020;
originally announced June 2020.
-
The DireXeno Experiment -- Measuring Correlated Scintillation Signatures in Liquid Xenon
Authors:
R. Itay,
P. Z. Szabo,
G. Koltman,
M. M. Devi,
M. Shutman,
H. Landsman,
R. Budnik
Abstract:
We present a detector apparatus, DireXeno (DIRectinal Xenon), designed to measure the spatial and temporal properties of scintillation in liquid xenon to very high accuracy. The properties of scintillation are of primary importance for dark matter and neutrinoless double beta decay experiments, however the complicated microphysics involved limits theoretical predictions. We will explore the possib…
▽ More
We present a detector apparatus, DireXeno (DIRectinal Xenon), designed to measure the spatial and temporal properties of scintillation in liquid xenon to very high accuracy. The properties of scintillation are of primary importance for dark matter and neutrinoless double beta decay experiments, however the complicated microphysics involved limits theoretical predictions. We will explore the possibility that scintillation emission exhibits correlation in light emission such as super-radiance, which depends on the type of interaction. Such properties of scintillation light may open a new window for background rejection as well as directionality measurements. We present the technical design and the concepts driving it, and demonstrate that statistical treatment will enable detecting anisotropy of as little as 10% of the photons. We show results from commissioning runs in which the detector operated for over 44 days in stable conditions. The time resolution for individual photons in different PMTs was measured to be $\lesssim1.3$ ns FWHM, corresponding to $\lesssim0.55$ ns (1 $σ$).
△ Less
Submitted 1 June, 2020; v1 submitted 17 September, 2019;
originally announced September 2019.
-
Observation of quantum corrections to conductivity up to optical frequencies
Authors:
P. Neilinger,
J. Greguš,
D. Manca,
B. Grančič,
M. Kopčík,
P. Szabó,
P. Samuely,
R. Hlubina,
M. Grajcar
Abstract:
It is well known that conductivity of disordered metals is suppressed in the limit of low frequencies and temperatures by quantum corrections. Although predicted by theory to exist up to much higher energies, such corrections have so far been experimentally proven only for $\lesssim$80 meV. Here, by a combination of transport and optical studies, we demonstrate that the quantum corrections are pre…
▽ More
It is well known that conductivity of disordered metals is suppressed in the limit of low frequencies and temperatures by quantum corrections. Although predicted by theory to exist up to much higher energies, such corrections have so far been experimentally proven only for $\lesssim$80 meV. Here, by a combination of transport and optical studies, we demonstrate that the quantum corrections are present in strongly disordered conductor MoC up to at least $\sim$4 eV, thereby extending the experimental window where such corrections were found by a factor of 50. The knowledge of both, the real and imaginary parts of conductivity, enables us to identify the microscopic parameters of the conduction electron fluid. We find that the conduction electron density of strongly disordered MoC is surprisingly high and we argue that this should be considered a generic property of metals on the verge of disorder-induced localization transition.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
A Viscoelastic Catastrophe
Authors:
Kristian Ejlebjerg Jensen,
Peter Szabo,
Fridolin Okkels
Abstract:
We use a differential constitutive equation to model the flow of a viscoelastic flow in a cross-slot geometry, which is known to exhibit bistability above a critical flow rate. The novelty lies in two asymmetric modifications to the geometry, which causes a change in the bifurcation diagram such that one of the stable solutions becomes disconnected from the solution at low flow speeds. First we sh…
▽ More
We use a differential constitutive equation to model the flow of a viscoelastic flow in a cross-slot geometry, which is known to exhibit bistability above a critical flow rate. The novelty lies in two asymmetric modifications to the geometry, which causes a change in the bifurcation diagram such that one of the stable solutions becomes disconnected from the solution at low flow speeds. First we show that it is possible to mirror one of the modifications such that the system can be forced to the disconnected solution. Then we show that a slow decrease of the flow rate, can cause the system to go through a drastic change on a short time scale, also known as a catastrophe. The short time scale could lead to a precise and simple experimental measurement of the flow conditions at which the viscoelastic catastrophe occurs. Since the phenomena is intrinsically related to the extensional rheology of the fluid, we propose to exploit the phenomena for in-line extensional rheometry.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
A surface-hopping method for semiclassical calculations of cross sections for radiative association with electronic transitions
Authors:
Péter Szabó,
Magnus Gustafsson
Abstract:
A semicalssical method based on surface-hopping techniques is developed to model the dynamics of radiative association with electronic transitions in arbitrary polyatomic systems. It can be proven that our method is an extension of the established semiclassical formula used in the characterization of diatomic molecule- formation. Our model is tested for diatomic molecules. It gives the same cross…
▽ More
A semicalssical method based on surface-hopping techniques is developed to model the dynamics of radiative association with electronic transitions in arbitrary polyatomic systems. It can be proven that our method is an extension of the established semiclassical formula used in the characterization of diatomic molecule- formation. Our model is tested for diatomic molecules. It gives the same cross sections as the former semiclassical formula, but contrary to the former method it allows us to follow the fate of the trajectories after the emission of a photon. This means that we can characterize the rovibrational states of the stabilized molecules: using semiclassial quantization we can obtain quantum state resolved cross sections or emission spectra for the radiative association process. The calculated semiclassical state resolved spectra show good agreement with the result of quantum mechanical perturbation theory. Furthermore our surface-hopping model is not only applicable for the description of radiative association but it can be use for semiclassical characterization of any molecular process where spontaneous emission occurs.
△ Less
Submitted 2 May, 2017;
originally announced May 2017.
-
Implementation of the Log-Conformation Formulation for Two-Dimensional Viscoelastic Flow
Authors:
K. E. Jensen,
P. Szabo,
F. Okkels
Abstract:
We have implemented the log-conformation method for two-dimensional viscoelastic flow in COMSOL, a commercial high-level finite element package. The code is verified for an Oldroyd-B fluid flowing past a confined cylinder. We are also able to describe the well-known bistability of the viscoelastic flow in a cross-slot geometry for a FENE-CR fluid, and we describe the changes required for performin…
▽ More
We have implemented the log-conformation method for two-dimensional viscoelastic flow in COMSOL, a commercial high-level finite element package. The code is verified for an Oldroyd-B fluid flowing past a confined cylinder. We are also able to describe the well-known bistability of the viscoelastic flow in a cross-slot geometry for a FENE-CR fluid, and we describe the changes required for performing simulations with the Phan-Thien-Tanner (PTT), Giesekus and FENE-P models. Finally, we calculate the flow of a FENE-CR fluid in a geometry with three in- and outlets. The implementation is included in the supplementary material, and we hope that it can inspire new as well as experienced researchers in the field of differential constitutive equations for viscoelastic flow.
△ Less
Submitted 20 April, 2016; v1 submitted 5 August, 2015;
originally announced August 2015.
-
Short time die attach characterisation of semiconductor devices
Authors:
P. Szabo,
M. Rencz
Abstract:
Thermal qualification of the die attach of semiconductor devices is a very important element in the device characterization as the temperature of the chip is strongly affected by the quality of the die attach. Voids or delaminations in this layer may cause higher temperature elevation and thus damage or shorter lifetime. Thermal test of each device in the manufacturing process would be the best…
▽ More
Thermal qualification of the die attach of semiconductor devices is a very important element in the device characterization as the temperature of the chip is strongly affected by the quality of the die attach. Voids or delaminations in this layer may cause higher temperature elevation and thus damage or shorter lifetime. Thermal test of each device in the manufacturing process would be the best solution for eliminating the devices with wrong die attach layer. In this paper we will present the short time thermal transient measurement method and the structure function evaluation through simulations and measurements for die attach characterization. We will also present a method for eliminating the very time consuming calibration process. Using the proposed methods even the in-line testing of LEDs can be accomplished.
△ Less
Submitted 7 January, 2008;
originally announced January 2008.
