Showing 1–6 of 6 results for author: Swanson, C P

Prototyping and Test of the "Canis" HTS Planar Coil Array for Stellarator Field Shaping

Authors: D. Nash, D. A. Gates, W. S. Walsh, M. Slepchenkov, D. Guan, A. D. Cate, B. Chen, M. Dickerson, W. Harris, U. Khera, M. Korman, S. Srinivasan, C. P. S. Swanson, A. van Riel, R. H. Wu, A. S. Basurto, B. Berzin, E. Brown, C. Chen, T. Ikuss, W. B. Kalb, C. Khurana, B. D. Koehne, T. G. Kruger, S. Noronha , et al. (8 additional authors not shown)

Abstract: Thea Energy, Inc. is currently developing the "Eos" planar coil stellarator, the Company's first integrated fusion system capable of forming optimized stellarator magnetic fields without complex and costly modular coils. To demonstrate the field shaping capability required to enable Eos, Thea Energy designed, constructed, and tested the "Canis" 3x3 array of high-temperature superconductor (HTS) pl… ▽ More Thea Energy, Inc. is currently developing the "Eos" planar coil stellarator, the Company's first integrated fusion system capable of forming optimized stellarator magnetic fields without complex and costly modular coils. To demonstrate the field shaping capability required to enable Eos, Thea Energy designed, constructed, and tested the "Canis" 3x3 array of high-temperature superconductor (HTS) planar shaping coils after successfully demonstrating a single shaping coil prototype. Through the Canis 3x3 magnet array program, Thea Energy manufactured nine HTS shaping coils and developed the cryogenic test and measurement infrastructure necessary to validate the array's performance. Thea Energy operated the array at 20 K, generating several stellarator-relevant magnetic field shapes and demonstrating closed loop field control of the superconducting magnets to within 1% of predicted field, a margin of error acceptable for operation of an integrated stellarator. The Canis magnet array test campaign provides a proof of concept for HTS planar shaping coils as a viable approach to confining stellarator plasmas. △ Less

Submitted 19 March, 2025; originally announced March 2025.

Comments: 13 pages, 20 figures

Flexible Stellarator Physics Facility

Authors: F. I. Parra, S. -G. Baek, M. Churchill, D. R. Demers, B. Dudson, N. M. Ferraro, B. Geiger, S. Gerhardt, K. C. Hammond, S. Hudson, R. Jorge, E. Kolemen, D. M. Kriete, S. T. A. Kumar, M. Landreman, C. Lowe, D. A. Maurer, F. Nespoli, N. Pablant, M. J. Pueschel, A. Punjabi, J. A. Schwartz, C. P. S. Swanson, A. M. Wright

Abstract: We propose to build a Flexible Stellarator Physics Facility to explore promising regions of the vast parameter space of disruption-free stellarator solutions for Fusion Pilot Plants (FPPs). We propose to build a Flexible Stellarator Physics Facility to explore promising regions of the vast parameter space of disruption-free stellarator solutions for Fusion Pilot Plants (FPPs). △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: White paper submitted to FESAC subcommittee on Facilities, 8 pages

Validation and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane

Authors: C. P. S. Swanson, S. Kahn, C. Rana, P. H. Titus, A. W. Brooks, W. Guttenfelder, Y. Zhai, T. G. Brown, J. E. Menard

Abstract: We present the verification, validation, and results of an approximate, analytic model for the radial profile of the stress, strain, and displacement within the toroidal field (TF) coil of a Tokamak at the inner midplane, where stress management is of the most concern. The model is designed to have high execution speed yet capture the essential physics, suitable for scoping studies, rapid evaluati… ▽ More We present the verification, validation, and results of an approximate, analytic model for the radial profile of the stress, strain, and displacement within the toroidal field (TF) coil of a Tokamak at the inner midplane, where stress management is of the most concern. The model is designed to have high execution speed yet capture the essential physics, suitable for scoping studies, rapid evaluation of designs, and in the inner loop of an optimizer. It is implemented in the PROCESS fusion reactor systems code. The model solves a many-layer axisymmetric extended plane strain problem. It includes linear elastic deformation, Poisson effects, transverse-isotropic materials properties, radial Lorentz force profiles, and axial tension applied to layer subsets. The model does not include out-of-plane forces from poloidal field coils. We benchmark the model against 2D and 3D Finite Element Analyses (FEA) using Ansys and COMSOL. We find the Tresca stress accuracy of the model to be within 10\% of the FEA result. We show that this model allows PROCESS to optimize a fusion pilot plant, subject to the TF coil winding pack and coil case yield constraints. This model sets an upper limit on the magnetic field strength at the coil surface of $29$ Tesla for steel TF coil cases, with the practical limit being significantly below this. △ Less

Submitted 21 September, 2022; v1 submitted 29 June, 2022; originally announced June 2022.

Plane strain optimization of conductor and structure grading in the inner leg of a Tokamak toroidal field coil

Authors: Charles PS Swanson

Abstract: I present the results of the analytic plane strain optimization of the structure and conductor grading in the inner leg of a Tokamak toroidal field coil. The coil is assumed to be made of regions of soft conductor inside a stiff grid of conduit. Calculus of variations is used to determine the optimal profile of this structure. The optimal solution is found to be two-layered. An outer layer is buck… ▽ More I present the results of the analytic plane strain optimization of the structure and conductor grading in the inner leg of a Tokamak toroidal field coil. The coil is assumed to be made of regions of soft conductor inside a stiff grid of conduit. Calculus of variations is used to determine the optimal profile of this structure. The optimal solution is found to be two-layered. An outer layer is bucked only, not wedged, and the structure fraction is graded so that all structure is at a uniform stress. An inner layer is an advanced bucking cylinder, similar to a Florida Bitter plate, whose radial stiffness is tuned so that its azimuthal stress is uniform. Such an advanced bucking cylinder would require advanced manufacturing to fabricate. These results should be seen an upper limits rather than achievable performance. Concepts that arise from this optimization, such as selectively softening layers of the bucking cylinder by drilling or cutting, may be of use to real designs in a less-optimized form. △ Less

Submitted 10 October, 2022; v1 submitted 9 June, 2022; originally announced June 2022.

Electron heating in 2-D: combining Fermi-Ulam acceleration and magnetic-moment non-adiabaticity in a mirror-configuration plasma

Authors: C. P. S. Swanson, S. A. Cohen, C. A. Galea

Abstract: We analyze a new mechanism for the creation and confinement of energetic electrons in a mirror-configuration plasma. A Fermi-Ulam-type process, driven by end-localized coherent electrostatic oscillations, provides axial acceleration while a natural non-adiabaticity of μ provides phase decorrelation and energy isotropization. This novel 2-D combination causes the electron energy distribution functi… ▽ More We analyze a new mechanism for the creation and confinement of energetic electrons in a mirror-configuration plasma. A Fermi-Ulam-type process, driven by end-localized coherent electrostatic oscillations, provides axial acceleration while a natural non-adiabaticity of μ provides phase decorrelation and energy isotropization. This novel 2-D combination causes the electron energy distribution function, calculated with a diffusive-loss model, to assume a Maxwellian shape with the μ non-adiabaticity reducing loss-cone escape and annulling the absolute-barrier energy-limiting Chirikov criterion of lower dimensional models. The theoretical predictions are compared with data from an experiment. △ Less

Submitted 27 April, 2022; originally announced April 2022.

Comments: 9 pages, 5 figures

The effect of rigid electron rotation on the Grad-Shafranov equilibria of a class of FRC devices

Authors: C. P. S. Swanson, S. A. Cohen

Abstract: Rigid electron rotation of a fully penetrated Rotamak-FRC produces a pressure flux function that is more peaked than the Solov'ev flux function. This paper explores the implications of this peaked pressure flux function, including the isothermal case, which appear when the temperature profile is broader than the density profile, creating both benefits and challenges to a Rotamak-FRC based fusion r… ▽ More Rigid electron rotation of a fully penetrated Rotamak-FRC produces a pressure flux function that is more peaked than the Solov'ev flux function. This paper explores the implications of this peaked pressure flux function, including the isothermal case, which appear when the temperature profile is broader than the density profile, creating both benefits and challenges to a Rotamak-FRC based fusion reactor. In this regime, the density distribution becomes very peaked, enhancing the fusion power. The separatrix has a tendency to become oblate, which can be mitigated by flux conserving current loops. Plasma extends outside the separatrix, notably in the open field line region. This model does not apply to very kinetic FRCs or FRCs in which there are significant ion flows, but it may have some applicability to their outer layers. △ Less

Submitted 19 March, 2021; originally announced March 2021.