-
Contact-angle hysteresis provides resistance to drainage of liquid-infused surfaces in turbulent flows
Authors:
Sofia Saoncella,
Si Suo,
Johan Sundin,
Agastya Parikh,
Marcus Hultmark,
Wouter Metsola van der Wijngaart,
Fredrik Lundell,
Shervin Bagheri
Abstract:
Lubricated textured surfaces immersed in liquid flows offer tremendous potential for reducing fluid drag, enhancing heat and mass transfer, and preventing fouling. According to current design rules, the lubricant must chemically match the surface to remain robustly trapped within the texture. However, achieving such chemical compatibility poses a significant challenge for large-scale flow systems,…
▽ More
Lubricated textured surfaces immersed in liquid flows offer tremendous potential for reducing fluid drag, enhancing heat and mass transfer, and preventing fouling. According to current design rules, the lubricant must chemically match the surface to remain robustly trapped within the texture. However, achieving such chemical compatibility poses a significant challenge for large-scale flow systems, as it demands advanced surface treatments or severely limits the range of viable lubricants. In addition, chemically tuned surfaces often degrade over time in harsh environments. Here, we demonstrate that a lubricant-infused surface (LIS) can resist drainage in the presence of external shear flow without requiring chemical compatibility. Surfaces featuring longitudinal grooves can retain up to 50% of partially wetting lubricants in fully developed turbulent flows. The retention relies on contact-angle hysteresis, where triple-phase contact lines are pinned to substrate heterogeneities, creating capillary resistance that prevents lubricant depletion. We develop an analytical model to predict the maximum length of pinned lubricant droplets in microgrooves. This model, validated through a combination of experiments and numerical simulations, can be used to design chemistry-free LISs for applications where the external environment is continuously flowing. Our findings open up new possibilities for using functional surfaces to control transport processes in large systems.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Slip of submerged two-dimensional liquid-infused surfaces in the presence of surfactants
Authors:
Johan Sundin,
Shervin Bagheri
Abstract:
Using numerical simulations, we investigate the effects of Marangoni stresses induced by surfactants on the effective slip length of liquid-infused surfaces (LIS) with transverse grooves. The surfactants are assumed soluble in the external liquid shearing the surface and can adsorb onto the interfaces. Two different adsorption models are used: a classical Frumkin model and a more advanced model th…
▽ More
Using numerical simulations, we investigate the effects of Marangoni stresses induced by surfactants on the effective slip length of liquid-infused surfaces (LIS) with transverse grooves. The surfactants are assumed soluble in the external liquid shearing the surface and can adsorb onto the interfaces. Two different adsorption models are used: a classical Frumkin model and a more advanced model that better describes the decrease of surface tension for minuscule concentrations. The simulations show that LIS may face even more severe effects of surfactants than previously investigated superhydrophobic surfaces. Constructing an analytical model for the effective slip length, we can predict the critical surfactant concentration for which the slip length decreases significantly. This analytical model describes both adsorption models of LIS on a unified framework if properly adjusted. We also advance the understanding of when surfactant advection gives rise to highly skewed interfacial concentrations - the so-called partial stagnant cap regime. To a good approximation, this regime can only exist below a specific surfactant concentration given by the Marangoni number and the strength of the surfactants.
△ Less
Submitted 1 October, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Nanoscale sheared droplet: Volume-of-Fluid, phase-field and no-slip molecular dynamics
Authors:
Uǧis Lācis,
Michele Pellegrino,
Johan Sundin,
Gustav Amberg,
Stephané Zaleski,
Berk Hess,
Shervin Bagheri
Abstract:
The motion of the three-phase contact line between two immiscible fluids and a solid surface arises in a variety of wetting phenomena and technological applications. One challenge in continuum theory is the effective representation of molecular phenomena close to the contact line. Here, we characterize the molecular processes of the moving contact line to assess the accuracy of two different conti…
▽ More
The motion of the three-phase contact line between two immiscible fluids and a solid surface arises in a variety of wetting phenomena and technological applications. One challenge in continuum theory is the effective representation of molecular phenomena close to the contact line. Here, we characterize the molecular processes of the moving contact line to assess the accuracy of two different continuum two-phase models. Specifically, molecular dynamics (MD) simulations of a two-dimensional droplet between two moving plates are used to create reference data for different capillary numbers and contact angles. We use a simple-point-charge/extended (SPC/E) water model with particle-mesh Ewald electrostatics treatment. This model provides a very small slip and a more realistic representation of the molecular physics than Lennards-Jones models. The Cahn-Hilliard phase-field model and the Volume-of-Fluid model are calibrated against the drop displacement from MD reference data. It is demonstrated that the calibrated continuum models can accurately capture droplet displacement and droplet breakup for different capillary numbers and contact angles. However, we also observe differences between continuum and atomistic simulations in describing the transient and unsteady droplet behavior, in particular, close to dynamical wetting transitions. The molecular dynamics of the sheared droplet provide insight of the line friction experienced by the advancing and receding contact lines and evidence of large-scale temporal "stick-slip" like oscillations. The presented results will serve as a stepping stone towards developing accurate continuum models for nanoscale hydrodynamics.
△ Less
Submitted 12 April, 2022; v1 submitted 17 December, 2021;
originally announced December 2021.
-
Heat transfer increase by convection in liquid-infused surfaces for laminar and turbulent flows
Authors:
Johan Sundin,
Umberto Ciri,
Stefano Leonardi,
Marcus Hultmark,
Shervin Bagheri
Abstract:
Liquid-infused surfaces (LIS) can reduce friction drag in both laminar and turbulent flows. However, the heat transfer properties of such multi-phase surfaces have still not been investigated to a large extent. We use numerical simulations to study conjugate heat transfer of liquid-filled grooves. It is shown that heat transfer can increase for both laminar and turbulent liquid flows due to recirc…
▽ More
Liquid-infused surfaces (LIS) can reduce friction drag in both laminar and turbulent flows. However, the heat transfer properties of such multi-phase surfaces have still not been investigated to a large extent. We use numerical simulations to study conjugate heat transfer of liquid-filled grooves. It is shown that heat transfer can increase for both laminar and turbulent liquid flows due to recirculation in the surface texture. For the increase to be substantial, the thermal conductivity of the solid must be similar to the thermal conductivity of the fluids, and the recirculation in the grooves must be sufficiently strong (Péclet number larger than 1). The ratio of the surface cavity to the system height is an upper limit of the direct contribution from the recirculation. While this ratio can be significant for laminar flows in microchannels, it is limited for turbulent flows, where the system scale (e.g. channel height) usually is much larger than the texture height. However, heat transfer enhancement on the order of $10\%$ is observed (with a net drag reduction) in a turbulent channel flow at a friction Reynolds number $Re_τ\approx 180$. It is shown that the turbulent convection in the bulk can be enhanced indirectly from the recirculation in the grooves.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Roughness on liquid-infused surfaces induced by capillary waves
Authors:
Johan Sundin,
Stéphane Zaleski,
Shervin Bagheri
Abstract:
Liquid-infused surfaces (LIS) are a promising technique for reducing friction, fouling and icing in both laminar and turbulent flows. Previous work has demonstrated that these surfaces are susceptible to shear-driven drainage. Here, we report a different failure mode using direct numerical simulations of a turbulent channel flow with liquid-infused longitudinal grooves. When the liquid-liquid surf…
▽ More
Liquid-infused surfaces (LIS) are a promising technique for reducing friction, fouling and icing in both laminar and turbulent flows. Previous work has demonstrated that these surfaces are susceptible to shear-driven drainage. Here, we report a different failure mode using direct numerical simulations of a turbulent channel flow with liquid-infused longitudinal grooves. When the liquid-liquid surface tension is small and/or grooves are wide, we observe traveling-wave perturbations on the interface with amplitudes larger than the viscous sublayer of the turbulent flow. These capillary waves induce a roughness effect that increases drag. The generation mechanism of these waves is explained using the theory developed by Miles for gravity waves. Energy is transferred from the turbulent flow to the LIS provided that there is a negative curvature of the mean flow at the critical layer. Given the groove width, the Weber number and an estimate of the friction Reynolds number, we provide relations to determine whether a LIS behaves as a smooth or rough surface in a turbulent flow.
△ Less
Submitted 12 April, 2021; v1 submitted 2 February, 2021;
originally announced February 2021.
-
Interaction between hairy surfaces and turbulence for different surface time scales
Authors:
Johan Sundin,
Shervin Bagheri
Abstract:
Surfaces with filamentous structures are ubiquitous in nature on many different scales, ranging from forests to micrometer-sized cilia in organs. Hairy surfaces are elastic and porous, and it is not fully understood how they modify turbulence near a wall. The interaction between hairy surfaces and turbulent flows is here investigated numerically in a turbulent channel flow configuration at…
▽ More
Surfaces with filamentous structures are ubiquitous in nature on many different scales, ranging from forests to micrometer-sized cilia in organs. Hairy surfaces are elastic and porous, and it is not fully understood how they modify turbulence near a wall. The interaction between hairy surfaces and turbulent flows is here investigated numerically in a turbulent channel flow configuration at $Re_τ\approx 180$. We show that a filamentous bed of a given geometry can modify a turbulent flow very differently depending on the resonance frequency of the surface, which is determined by elasticity and mass of the filaments. Filaments having resonance frequencies lower than the main frequency content of the turbulent wall-shear stress conform to slowly traveling elongated streaky structures, since they are too slow to adapt to fluid forces of higher frequencies. On the other hand, a bed consisting of stiff and low-mass filaments has a high resonance frequency and shows local regions of increased permeability, which results in large entrainment and a vast increase in drag.
△ Less
Submitted 16 November, 2018; v1 submitted 25 June, 2018;
originally announced June 2018.
