Salt-rejecting continuous passive solar thermal desalination via convective flow and thin-film condensation
Authors:
Patrick I. Babb,
S. Farzad Ahmadi,
Forrest Brent,
Ruby Gans,
Mabel Aceves Lopez,
Jiuxu Song,
Qixian Wang,
Brandon Zou,
Xiangying Zuo,
Amanda Strom,
Jaya Nolt,
Tyler Susko,
Kirk Fields,
Yangying Zhu
Abstract:
Passive solar desalination is an emerging low-cost technology for fresh water production. State of the art desalinators typically evaporate water using wicking structures to achieve high solar-to-vapor efficiency by minimizing heat loss. However, wicking structures cannot reject salt continuously which limits the operating duration of the desalinators to several hours before the devices are turned…
▽ More
Passive solar desalination is an emerging low-cost technology for fresh water production. State of the art desalinators typically evaporate water using wicking structures to achieve high solar-to-vapor efficiency by minimizing heat loss. However, wicking structures cannot reject salt continuously which limits the operating duration of the desalinators to several hours before the devices are turned off to reject salt. While significant research has focused on developing efficient evaporators to achieve high solar-to-vapor efficiency, inefficient condensers have become the bottleneck for the overall solar-to-water efficiency. To overcome these challenges, we designed a passive inverted single stage solar membrane desalinator that achieves continuous desalination and salt rejection. By flowing salt water on a radiative absorbing, porous, hydrophobic evaporator membrane using gravity, salt continuously diffuses away from the membrane while allowing heated water vapor to transport to and condense on a cooler microporous membrane below. Our design utilizes thin-film condensation on a microporous membrane which offers ample three-phase contact region to enhance condensation phase change heat transfer. By condensing within the microporous membrane, we reduce the gap distance between the condenser and evaporator membranes, which reduces the vapor transport resistance. We experimentally demonstrated a record-high continuous desalination and salt rejection test duration of 7 days under one-sun. Despite an increased convection heat loss necessary for salt rejection on the evaporator, our desalinator still achieved a water-collection rate of 0.487 $kg$ $m^{-2}h^{-1}$, which corresponds to a 32.2% solar-to-water efficiency. This work signifies an improvement in the robustness of current state of the art desalinators and presents a new architecture to further optimize passive solar desalinators.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
Trapping in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker
Authors:
W. Adam,
T. Bergauer,
M. Dragicevic,
M. Friedl,
R. Fruehwirth,
M. Hoch,
J. Hrubec,
M. Krammer,
W. Treberspurg,
W. Waltenberger,
S. Alderweireldt,
W. Beaumont,
X. Janssen,
S. Luyckx,
P. Van Mechelen,
N. Van Remortel,
A. Van Spilbeeck,
P. Barria,
C. Caillol,
B. Clerbaux,
G. De Lentdecker,
D. Dobur,
L. Favart,
A. Grebenyuk,
Th. Lenzi
, et al. (663 additional authors not shown)
Abstract:
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi…
▽ More
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trapping rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trapping rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trapping rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
