-
Flame-wall interaction of thermodiffusively unstable hydrogen/air flames -- Part II: Parametric variations of equivalence ratio, temperature, and pressure
Authors:
Max Schneider,
Hendrik Nicolai,
Vinzenz Schuh,
Matthias Steinhausen,
Christian Hasse
Abstract:
Fuel-lean hydrogen combustion systems hold significant potential for low pollutant emissions, but are also susceptible to intrinsic combustion instabilities. While most research on these instabilities has focused on flames without wall confinement, practical combustors are typically enclosed by walls that strongly influence the combustion dynamics. In part I of this work, the flame-wall interactio…
▽ More
Fuel-lean hydrogen combustion systems hold significant potential for low pollutant emissions, but are also susceptible to intrinsic combustion instabilities. While most research on these instabilities has focused on flames without wall confinement, practical combustors are typically enclosed by walls that strongly influence the combustion dynamics. In part I of this work, the flame-wall interaction of intrinsically unstable hydrogen/air flames has been studied for a single operating condition through detailed numerical simulations in a two-dimensional head-on quenching configuration. This study extends the previous investigation to a wide range of gas turbine and engine-relevant operating conditions, including variations in equivalence ratio (0.4 - 1.0), unburnt gas temperature (298 K - 700 K), and pressure (1.01325 bar - 20 bar). These parametric variations allow for a detailed analysis and establish a baseline for modeling the effects of varying instability intensities on the quenching process, as the relative influence of thermodiffusive and hydrodynamic instabilities depends on the operating conditions. While the quenching characteristics remain largely unaffected by hydrodynamic instabilities, the presence of thermodiffusive instabilities significantly increases the mean wall-heat flux and reduces the mean quenching distance. Furthermore, the impact of thermodiffusive instabilities on the quenching process intensifies as their intensity increases, driven by an increase in pressures and a decrease in equivalence ratio and unburnt gas temperature.
△ Less
Submitted 27 November, 2024;
originally announced November 2024.
-
Flame-wall interaction of thermodiffusively unstable hydrogen/air flames -- Part I: Characterization of governing physical phenomena
Authors:
Max Schneider,
Hendrik Nicolai,
Vinzenz Schuh,
Matthias Steinhausen,
Christian Hasse
Abstract:
Hydrogen combustion systems operated under fuel-lean conditions offer great potential for low emissions. However, these operating conditions are also susceptible to intrinsic thermodiffusive combustion instabilities. Even though technical combustors are enclosed by walls that significantly influence the combustion process, intrinsic flame instabilities have mostly been investigated in canonical fr…
▽ More
Hydrogen combustion systems operated under fuel-lean conditions offer great potential for low emissions. However, these operating conditions are also susceptible to intrinsic thermodiffusive combustion instabilities. Even though technical combustors are enclosed by walls that significantly influence the combustion process, intrinsic flame instabilities have mostly been investigated in canonical freely-propagating flame configurations unconfined by walls. This study aims to close this gap by investigating the flame-wall interaction of thermodiffusive unstable hydrogen/air flame through detailed numerical simulations in a two-dimensional head-on quenching configuration. It presents an in-depth qualitative and quantitative analysis of the quenching process, revealing the major impact factors of the instabilities on the quenching characteristics. The thermodiffusive instabilities result in lower quenching distances and increased wall heat fluxes compared to one-dimensional head-on quenching flames under similar operation conditions. The change in quenching characteristics seems not to be driven by kinematic effects. Instead, the increased wall heat fluxes are caused by the enhanced flame reactivity of the unstable flame approaching the wall, which results from mixture variations associated with the instabilities. Overall, the study highlights the importance of studying flame-wall interaction in more complex domains than simple one-dimensional configurations, where such instabilities are inherently suppressed. Further, it emphasizes the need to incorporate local mixture variations induced by intrinsic combustion instabilities in combustion models for flame-wall interactions. In part II of this study, the scope is expanded to gas turbine and internal combustion engine relevant conditions through a parametric study, varying the equivalence ratio, pressure, and unburnt temperature.
△ Less
Submitted 26 November, 2024;
originally announced November 2024.
-
Assessment of flamelet manifolds for turbulent flame-wall interactions in Large-Eddy Simulations
Authors:
Yujuan Luo,
Matthias Steinhausen,
Driss Kaddar,
Christian Hasse,
Federica Ferraro
Abstract:
A turbulent side-wall quenching (SWQ) flame in a fully developed channel flow is studied using Large-Eddy Simulation (LES) with a tabulated chemistry approach. Three different flamelet manifolds with increasing levels of complexity are applied: the Flamelet-Generated Manifold (FGM) considering varying enthalpy levels, the Quenching Flamelet-Generated Manifold (QFM), and the recently proposed Quenc…
▽ More
A turbulent side-wall quenching (SWQ) flame in a fully developed channel flow is studied using Large-Eddy Simulation (LES) with a tabulated chemistry approach. Three different flamelet manifolds with increasing levels of complexity are applied: the Flamelet-Generated Manifold (FGM) considering varying enthalpy levels, the Quenching Flamelet-Generated Manifold (QFM), and the recently proposed Quenching Flamelet-Generated Manifold with Exhaust Gas Recirculation (QFM-EGR), with the purpose being to assess their capability to predict turbulent flame-wall interactions (FWIs), which are highly relevant to numerical simulations of real devices such as gas turbines and internal combustion engines.
The accuracy of the three manifolds is evaluated and compared a posteriori, using the data from a previously published flame-resolved simulation with detailed chemistry for reference. For LES with the FGM, the main characteristics such as the mean flow field, temperature, and major species can be captured well, while notable deviations from the reference results are observed for the near-wall region, especially for pollutant species such as \ce{CO}. In accordance with the findings from laminar FWI, improvement is also observed in the simulation with QFM under turbulent flow conditions. Although LES with the QFM-EGR shows a similar performance in the prediction of mean quantities as LES with QFM, it presents significantly better agreement with the reference data regarding instantaneous thermo-chemical states near the quenching point. This indicates the necessity to take into account the mixing effects in the flamelet manifold to correctly capture the flame-vortex interaction near the flame tip in turbulent configurations. Based on the findings from this study, suitable flamelet manifolds can be chosen depending on the aspects of interest in practical applications.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
Application of dense neural networks for manifold-based modeling of flame-wall interactions
Authors:
Julian Bissantz,
Jeremy Karpowski,
Matthias Steinhausen,
Yujuan Luo,
Federica Ferraro,
Arne Scholtissek,
Christian Hasse,
Luc Vervisch
Abstract:
Artifical neural networks (ANNs) are universal approximators capable of learning any correlation between arbitrary input data with corresponding outputs, which can also be exploited to represent a low-dimensional chemistry manifold in the field of combustion. In this work, a procedure is developed to simulate a premixed methane-air flame undergoing side-wall quenching utilizing an ANN chemistry ma…
▽ More
Artifical neural networks (ANNs) are universal approximators capable of learning any correlation between arbitrary input data with corresponding outputs, which can also be exploited to represent a low-dimensional chemistry manifold in the field of combustion. In this work, a procedure is developed to simulate a premixed methane-air flame undergoing side-wall quenching utilizing an ANN chemistry manifold. In the investigated case, the flame characteristics are governed by two canonical problems: the adiabatic flame propagation in the core flow and the non-adiabatic flame-wall interaction governed by enthalpy losses to the wall. Similar to the tabulation of a Quenching Flamelet-Generated Manifold (QFM), the neural network is trained on a 1D head-on quenching flame database to learn the intrinsic chemistry manifold. The control parameters (i.e. the inputs) of the ANN are identified from thermo-chemical state variables by a sparse principal component analysis (PCA) without using prior knowledge about the flame physics. These input quantities are then transported in the coupled CFD solver and used for manifold access during simulation runtime. The chemical source terms are corrected at the manifold boundaries to ensure boundedness of the thermo-chemical state at all times. Finally, the ANN model is assessed by comparison to simulation results of the 2D side-wall quenching (SWQ) configuration with detailed chemistry and with a flamelet-based manifold (QFM).
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Numerical Investigation of the Local Thermo-Chemical State in a Thermo-Acoustically Unstable Dual Swirl Gas Turbine Model Combustor
Authors:
T. Jeremy P. Karpowski,
Federica Ferraro,
Matthias Steinhausen,
Sebastian Popp,
Christoph M. Arndt,
Christian Kraus,
Henning Bockhorn,
Wolfgang Meier,
Christian Hasse
Abstract:
In this work, the thermo-acoustic instabilities of a gas turbine model combustor, the so-called SFB606 combustor, are numerically investigated using Large Eddy Simulation (LES) combined with tabulated chemistry and Artificial Thickened Flame (ATF) approach. The main focus is a detailed analysis of the thermo-acoustic cycle and the accompanied equivalence ratio oscillations and their associated con…
▽ More
In this work, the thermo-acoustic instabilities of a gas turbine model combustor, the so-called SFB606 combustor, are numerically investigated using Large Eddy Simulation (LES) combined with tabulated chemistry and Artificial Thickened Flame (ATF) approach. The main focus is a detailed analysis of the thermo-acoustic cycle and the accompanied equivalence ratio oscillations and their associated convective time delay. In particular, the variations of the thermo-chemical state and flame characteristics over the thermo-acoustic cycle are investigated. For the operating point flame B ($P_{th}=25\,$kW), the burner exhibits thermo-acoustic instabilities with a dominant frequency of 392Hz, the acoustic eigenmode of the inner air inlet duct. These oscillations are accompanied by an equivalence ratio oscillation, which exhibits a convective time delay between the injection in the inner swirler and the flame zone. Two LES, one adiabatic and one accounting for heat losses at the walls by prescribing the wall temperatures from experimental data and Conjugated Heat Transfer (CHT) simulations, are conducted. Results with the enthalpy-dependent table are found to predict the time-averaged flow field in terms of velocity, major species, and temperature with higher accuracy than in the adiabatic case. Further, they indicate, that heat losses should be accounted for to correctly predict the flame position. Subsequently, the thermo-chemical state variations over the thermo-acoustic cycle for the enthalpy-dependant case are analyzed in detail and compared with experimental data in terms of phase-conditioned averaged profiles and conditional averages. An overall good prediction is observed. The results provide a detailed quantitative analysis of the thermo-acoustic feedback mechanism of this burner.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Combined effects of heat loss and curvature on turbulent flame-wall interaction in a premixed dimethyl ether/air flame
Authors:
Driss Kaddar,
Matthias Steinhausen,
Thorsten Zirwes,
Henning Bockhorn,
Christian Hasse,
Federica Ferraro
Abstract:
This study investigates the effects of curvature on the local heat release rate and mixture fraction during turbulent flame-wall interaction of a lean dimethyl ether/air flame using a fully resolved simulation with a reduced skeletal chemical reaction mechanism and mixture-averaged transport. The region in which turbulent flame-wall interaction affects the flame is found to be restricted to a wall…
▽ More
This study investigates the effects of curvature on the local heat release rate and mixture fraction during turbulent flame-wall interaction of a lean dimethyl ether/air flame using a fully resolved simulation with a reduced skeletal chemical reaction mechanism and mixture-averaged transport. The region in which turbulent flame-wall interaction affects the flame is found to be restricted to a wall distance less than twice the laminar flame thickness. In regions without heat losses, heat release rate and curvature, as well as mixture fraction and curvature, are negatively correlated, which is in accordance with experimental findings. Flame-wall interaction alters the correlation between heat release rate and curvature. An inversion in the sign of the correlation from negative to positive is observed as the flame starts to experience heat losses to the wall. The correlation between mixture fraction and curvature, however, is unaffected by flame-wall interactions and remains negative. Similarly to experimental findings, the investigated turbulent side-wall quenching flame shows both head-on quenching and side-wall quenching-like behavior. The different quenching events are associated with different curvature values in the near-wall region. Furthermore, for medium heat loss, the correlations between heat release rate and curvature are sensitive to the quenching scenario.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Flamelet modeling of thermo-diffusively unstable hydrogen-air flames
Authors:
Hannes Böttler,
Haris Lulic,
Matthias Steinhausen,
Xu Wen,
Christian Hasse,
Arne Scholtissek
Abstract:
In order to reduce CO2 emissions, hydrogen combustion has become increasingly relevant for technical applications. In this context, lean H2-air flames show promising features but, among other characteristics, they tend to exhibit thermo-diffusive instabilities. The formation of cellular structures associated with these instabilities leads to an increased flame surface area which further promotes t…
▽ More
In order to reduce CO2 emissions, hydrogen combustion has become increasingly relevant for technical applications. In this context, lean H2-air flames show promising features but, among other characteristics, they tend to exhibit thermo-diffusive instabilities. The formation of cellular structures associated with these instabilities leads to an increased flame surface area which further promotes the flame propagation speed, an important reference quantity for design, control, and safe operation of technical combustors. While many studies have addressed the physical phenomena of intrinsic flame instabilities in the past, there is also a demand to predict such flame characteristics with reduced-order models to allow computationally efficient simulations. In this work, a H2-air spherical expanding flame, which exhibits thermo-diffusive instabilities, is studied with flamelet-based modeling approaches both in a-priori and a-posteriori manner. A recently proposed Flamelet/Progress Variable (FPV) model, with a manifold based on unstretched planar flames, and a novel FPV approach, which takes into account a large curvature variation in the tabulated manifold, are compared to detailed chemistry (DC) calculations. First, both FPV approaches are assessed in terms of an a-priori test with the DC reference dataset. Thereafter, the a-posteriori assessment contains two parts: a linear stability analysis of perturbed planar flames and the simulation of the spherical expanding flame. Both FPV models are systematically analyzed considering global and local flame properties in comparison to the DC reference data. It is shown that the new FPV model, incorporating large curvature variations in the manifold, leads to improved predictions for the microstructure of the corrugated flame front and the formation of cellular structures, while global flame properties are reasonably well reproduced by both models.
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
Turbulent flame-wall interaction of premixed flames using Quadrature-based Moment Methods (QbMM) and tabulated chemistry: An a priori analysis
Authors:
M. Steinhausen,
T. Zirwes,
F. Ferraro,
S. Popp,
F. Zhang,
H. Bockhorn,
C. Hasse
Abstract:
Presumed probability density function (PDF) and transported PDF methods are commonly applied to model the turbulence chemistry interaction in turbulent reacting flows. However, little focus has been given to the turbulence chemistry interaction PDF closure for flame-wall interaction. In this study, a quasi-DNS of a turbulent premixed, stoichiometric methane-air flame ignited in a fully developed t…
▽ More
Presumed probability density function (PDF) and transported PDF methods are commonly applied to model the turbulence chemistry interaction in turbulent reacting flows. However, little focus has been given to the turbulence chemistry interaction PDF closure for flame-wall interaction. In this study, a quasi-DNS of a turbulent premixed, stoichiometric methane-air flame ignited in a fully developed turbulent channel flow undergoing side-wall quenching is investigated. The objective of this study is twofold. First, the joint PDF of the progress variable and enthalpy that needs to be accounted for in turbulence chemistry interaction closure models is analyzed in the quasi-DNS configuration, both in the core flow and the near-wall region. Secondly, a transported PDF closure model, based on a Conditional Quadrature Method of Moments approach, and a presumed PDF approach are examined in an a priori analysis using the quasi-DNS as a reference both in the context of Reynolds-Averaged Navier Stokes (RANS) and Large-Eddy Simulations (LESs). The analysis of the joint PDF demonstrates the high complexity of the reactive scalar distribution in the near-wall region. Here, a high correlation between the progress variable and enthalpy is found, where the flame propagation and quenching are present simultaneously. The transported PDF approach presented in this work, based on the Conditional Quadrature Method of Moments, accounts for the moments of the joint PDF of progress variable and enthalpy coupled to a Quenching-Flamelet Generated Manifold. In the a priori analysis both turbulence chemistry interaction PDF closure models show a high accuracy in the core flow. In the near-wall region, however, only the Conditional Quadrature Method of Moments approach is suitable to predict the flame structures.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Effect of flame retardants on side-wall quenching of partially premixed laminar flames
Authors:
Matthias Steinhausen,
Federica Ferraro,
Max Schneider,
Florian Zentgraf,
Max Greifenstein,
Andreas Dreizler,
Christian Hasse,
Arne Scholtissek
Abstract:
A combined experimental and numerical investigation of partially premixed laminar methane-air flames undergoing side-wall quenching (SWQ) is performed. A well-established SWQ burner is adapted to allow the seeding of the main flow with additional gaseous products issued from a (secondary) wall inlet close to the flame's quenching point. First, the characteristics of the partially premixed flame th…
▽ More
A combined experimental and numerical investigation of partially premixed laminar methane-air flames undergoing side-wall quenching (SWQ) is performed. A well-established SWQ burner is adapted to allow the seeding of the main flow with additional gaseous products issued from a (secondary) wall inlet close to the flame's quenching point. First, the characteristics of the partially premixed flame that quenches at the wall are assessed using planar laser-induced fluorescence measurements of the OH radical, and a corresponding numerical simulation with fully-resolved transport and chemistry is conducted. A boundary layer of enriched mixture is formed at the wall, leading to a reaction zone parallel to the wall for high injection rates from the wall inlet. Subsequently, in a numerical study, the wall inflow is mixed with dimethylmethylphosphonat (DMMP), a phosphor-based flame retardant. The DMMP addition allows the assessment of the combined effects of heat loss and flame retardants on the flame structure during flame-wall interaction. With an increasing amount of DMMP in the injected mixture, the flame stabilizes further away from the wall and shows a decrease in the local heat-release rate. Thereby, the maximum wall heat flux is significantly reduced. That results in a lower thermal load on the quenching wall. The flame structure analysis shows an accumulation of the intermediate species HOPO at the wall similar to the CO accumulation during the quenching of premixed flames without flame retardant addition. The study shows how the structure of a partially premixed flame is influenced by a wall that releases either additional fuel or a mixture of fuel and flame retardant. The insights gained from the canonical configuration can lead to a better understanding of the combined effects of flame retardants and heat losses in near-wall flames.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Flame-vortex interaction during turbulent side-wall quenching and its implications for flamelet manifolds
Authors:
Matthias Steinhausen,
Thorsten Zirwes,
Federica Ferraro,
Arne Scholtissek,
Henning Bockhorn,
Christian Hasse
Abstract:
In this study, the thermochemical state during turbulent flame-wall interaction of a stoichiometric methane-air flame is investigated using a fully resolved simulation with detailed chemistry. The turbulent side-wall quenching flame shows both head-on quenching and side-wall quenching-like behavior that significantly affects the CO formation in the near-wall region. The detailed insights from the…
▽ More
In this study, the thermochemical state during turbulent flame-wall interaction of a stoichiometric methane-air flame is investigated using a fully resolved simulation with detailed chemistry. The turbulent side-wall quenching flame shows both head-on quenching and side-wall quenching-like behavior that significantly affects the CO formation in the near-wall region. The detailed insights from the simulation are used to evaluate a recently proposed flame (tip) vortex interaction mechanism identified from experiments on turbulent side-wall quenching. It describes the entrainment of burnt gases into the fresh gas mixture near the flame's quenching point. The flame behavior and thermochemical states observed in the simulation are similar to the phenomena observed in the experiments. A novel chemistry manifold is presented that accounts for both the effects of flame dilution due to exhaust gas recirculation in the flame vortex interaction area and enthalpy losses to the wall. The manifold is validated in an a-priori analysis using the simulation results as a reference. The incorporation of exhaust gas recirculation effects in the manifold leads to a significantly increased prediction accuracy in the near-wall regions of flame-vortex interactions.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
