Showing 1–41 of 41 results for author: Stanitzki, M

Experimental demonstration of a tomographic 5D phase-space reconstruction

Authors: S. Jaster-Merz, R. W. Assmann, J. Beinortaitė, J. Björklund Svensson, R. Brinkmann, F. Burkart, P. Craievich, H. Dinter, P. González Caminal, W. Hillert, A. L. Kanekar, M. Kellermeier, W. Kuropka, F. Mayet, J. Osterhoff, B. Stacey, M. Stanitzki, T. Vinatier, S. Wesch, R. D'Arcy

Abstract: Detailed knowledge of particle-beam properties is of great importance to understand and push the performance of existing and next-generation particle accelerators. We recently proposed a new phase-space tomography method to reconstruct the five-dimensional (5D) phase space, i.e., the charge density distribution in all three spatial directions and the two transverse momenta. Here, we present the fi… ▽ More Detailed knowledge of particle-beam properties is of great importance to understand and push the performance of existing and next-generation particle accelerators. We recently proposed a new phase-space tomography method to reconstruct the five-dimensional (5D) phase space, i.e., the charge density distribution in all three spatial directions and the two transverse momenta. Here, we present the first experimental demonstration of the method at the FLASHForward facility at DESY. This includes the reconstruction of the 5D phase-space distribution of a GeV-class electron bunch, the use of this measured phase space to create a particle distribution for simulations, and the extraction of the transverse 4D slice emittance. △ Less

Submitted 19 May, 2025; originally announced May 2025.

The Muon Collider

Authors: Carlotta Accettura, Simon Adrian, Rohit Agarwal, Claudia Ahdida, Chiara Aime', Avni Aksoy, Gian Luigi Alberghi, Siobhan Alden, Luca Alfonso, Muhammad Ali, Anna Rita Altamura, Nicola Amapane, Kathleen Amm, David Amorim, Paolo Andreetto, Fabio Anulli, Ludovica Aperio Bella, Rob Appleby, Artur Apresyan, Pouya Asadi, Mohammed Attia Mahmoud, Bernhard Auchmann, John Back, Anthony Badea, Kyu Jung Bae , et al. (433 additional authors not shown)

Abstract: Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an… ▽ More Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an electron-positron collider, yielding a physics potential significantly greater than the sum of its individual parts. A high-energy muon collider is the natural next step in the exploration of fundamental physics after the HL-LHC and a natural complement to a future low-energy Higgs factory. Such a facility would significantly broaden the scope of particle colliders, engaging the many frontiers of the high energy community. The last European Strategy for Particle Physics Update and later the Particle Physics Project Prioritisation Panel in the US requested a study of the muon collider, which is being carried on by the International Muon Collider Collaboration. In this comprehensive document we present the physics case, the state of the work on accelerator design and technology, and propose an R\&D project that can make the muon collider a reality. △ Less

Submitted 30 April, 2025; originally announced April 2025.

Comments: 406 pages, supplementary report to the European Strategy for Particle Physics - 2026 update

The Linear Collider Facility (LCF) at CERN

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S. Ampudia Castelazo, D. Angal-Kalinin, J. A. Anguiano, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, D. Attié, J. L. Avila-Jimenez, H. Baer, Y. Bai, C. Balazs, P. Bambade, T. Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive, S. Belomestnykh, Y. Benhammou , et al. (386 additional authors not shown)

Abstract: In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr… ▽ More In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC. △ Less

Submitted 19 June, 2025; v1 submitted 31 March, 2025; originally announced March 2025.

Comments: Submission to the ESPPU, as updated version May 26

Report number: DESY-25-054

A Linear Collider Vision for the Future of Particle Physics

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S Ampudia Castelazo, D. Angal-Kalinin, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, A. Aryshev, S. Asai, D. Attié, J. L. Avila-Jimenez, H. Baer, J. A. Bagger, Y. Bai, I. R. Bailey, C. Balazs, T Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive , et al. (391 additional authors not shown)

Abstract: In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much… ▽ More In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC. △ Less

Submitted 31 March, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Comments: Community document for EPPSU, will be updated several times

Transient studies using a TCAD and Allpix Squared combination approach

Authors: Manuel A. Del Rio Viera, Eric Buschmann, Ankur Chauhan, Dominik Dannheim, Katharina Dort, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Karsten Hansen, Yajun He, Lennart Huth, Larissa Mendes, Budi Mulyanto, Daniil Rastorguev, Christian Reckleben, Sara Ruiz Daza, Judith Schlaadt, Paul Schütze, Adriana Simancas, Walter Snoeys, Simon Spannagel, Marcel Stanitzki, Anastasiia Velyka, Gianpiero Vignola, Håkan Wennlöf

Abstract: The goal of the TANGERINE project is to develop the next generation of monolithic silicon pixel detectors using a 65 nm CMOS imaging process, which offers a higher logic density and overall lower power consumption compared to previously used processes. A combination of Technology Computer-Aided Design (TCAD) and Monte Carlo (MC) simulations is used to understand the physical processes within the s… ▽ More The goal of the TANGERINE project is to develop the next generation of monolithic silicon pixel detectors using a 65 nm CMOS imaging process, which offers a higher logic density and overall lower power consumption compared to previously used processes. A combination of Technology Computer-Aided Design (TCAD) and Monte Carlo (MC) simulations is used to understand the physical processes within the sensing element and thus the overall performance of the pixel detector. The response of the sensors can then be tested in laboratory and test beam facilities and compared to simulation results. Transient simulations allow for studying the response of the sensor as a function of time, such as the signal produced after a charged particle passes through the sensor. The study of these signals is important to understand the magnitude and timing of the response from the sensors and improve upon them. While TCAD simulations are accurate, the time required to produce a single pulse is large compared to a combination of MC and TCAD simulations. In this work, a validation of the transient simulation approach and studies on charge collection are presented. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Comments: TIPP 2023 Proceedings

Simulating Monolithic Active Pixel Sensors: A Technology-Independent Approach Using Generic Doping Profiles

Authors: Håkan Wennlöf, Dominik Dannheim, Manuel Del Rio Viera, Katharina Dort, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Lennart Huth, Stephan Lachnit, Larissa Mendes, Daniil Rastorguev, Sara Ruiz Daza, Paul Schütze, Adriana Simancas, Walter Snoeys, Simon Spannagel, Marcel Stanitzki, Alessandra Tomal, Anastasiia Velyka, Gianpiero Vignola

Abstract: The optimisation of the sensitive region of CMOS sensors with complex non-uniform electric fields requires precise simulations, and this can be achieved by a combination of electrostatic field simulations and Monte Carlo methods. This paper presents the guiding principles of such simulations, using a CMOS pixel sensor with a small collection electrode and a high-resistivity epitaxial layer as an e… ▽ More The optimisation of the sensitive region of CMOS sensors with complex non-uniform electric fields requires precise simulations, and this can be achieved by a combination of electrostatic field simulations and Monte Carlo methods. This paper presents the guiding principles of such simulations, using a CMOS pixel sensor with a small collection electrode and a high-resistivity epitaxial layer as an example. The full simulation workflow is described, along with possible pitfalls and how to avoid them. For commercial CMOS processes, detailed doping profiles are confidential, but the presented method provides an optimisation tool that is sufficiently accurate to investigate sensor behaviour and trade-offs of different sensor designs without knowledge of proprietary information. The workflow starts with detailed electric field finite element method simulations in TCAD, using generic doping profiles. Examples of the effect of varying different parameters of the simulated sensor are shown, as well as the creation of weighting fields, and transient pulse simulations. The fields resulting from TCAD simulations can be imported into the Allpix Squared Monte Carlo simulation framework, which enables high-statistics simulations, including modelling of stochastic fluctuations from the underlying physics processes of particle interaction. Example Monte Carlo simulation setups are presented and the different parts of a simulation chain are described. Simulation studies from small collection electrode CMOS sensors are presented, and example results are shown for both single sensors and multiple sensors in a test beam telescope configuration. The studies shown are those typically performed on sensor prototypes in test beam campaigns, and a comparison is made to test beam data, showing a maximum deviation of 4% and demonstrating that the approach is viable for generating realistic results. △ Less

Submitted 31 July, 2024; originally announced August 2024.

Comments: 22 pages, 25 figures, submitted to Nuclear Instruments and Methods in Physics Research, Section A

Simulations and Performance Studies of a MAPS in 65 nm CMOS Imaging Technology

Authors: Adriana Simancas, Justus Braach, Eric Buschmann, Ankur Chauhan, Dominik Dannheim, Manuel Del Rio Viera, Katharina Dort, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Karsten Hansen, Lennart Huth, Larissa Mendes, Budi Mulyanto, Daniil Rastorguev, Christian Reckleben, Sara Ruiz Daza, Judith Schlaadt, Paul Schütze, Walter Snoeys, Simon Spannagel, Marcel Stanitzki, Anastasiia Velyka, Gianpiero Vignola, Håkan Wennlöf

Abstract: Monolithic active pixel sensors (MAPS) produced in a 65 nm CMOS imaging technology are being investigated for applications in particle physics. The MAPS design has a small collection electrode characterized by an input capacitance of ~fF, granting a high signal-to-noise ratio and low power consumption. Additionally, the 65 nm CMOS imaging technology brings a reduction in material budget and improv… ▽ More Monolithic active pixel sensors (MAPS) produced in a 65 nm CMOS imaging technology are being investigated for applications in particle physics. The MAPS design has a small collection electrode characterized by an input capacitance of ~fF, granting a high signal-to-noise ratio and low power consumption. Additionally, the 65 nm CMOS imaging technology brings a reduction in material budget and improved logic density of the readout circuitry, compared to previously studied technologies. Given these features, this technology was chosen by the TANGERINE project to develop the next generation of silicon pixel sensors. The sensor design targets temporal and spatial resolutions compatible with the requirements for a vertex detector at future lepton colliders. Simulations and test-beam characterization of technology demonstrators have been carried out in close collaboration with the CERN EP R&D program and the ALICE ITS3 upgrade. TCAD device simulations using generic doping profiles and Monte Carlo simulations have been used to build an understanding of the technology and predict the performance parameters of the sensor. Technology demonstrators of a 65 nm CMOS MAPS with a small collection electrode have been characterized in laboratory and test-beam facilities by studying performance parameters such as cluster size, charge collection, and efficiency. This work compares simulation results to test-beam data. The experimental results establish this technology as a promising candidate for a vertex detector at future lepton colliders and give valuable information for improving the simulation approach. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Comments: 6 pages, 5 figures, submitted to Nuclear Instruments and Methods in Physics Research, Section A as a conference proceeding for the 13th International "Hiroshima" Symposium on the Development and Application of Semiconductor Tracking Detectors

5D tomographic phase-space reconstruction of particle bunches

Authors: S. Jaster-Merz, R. W. Assmann, R. Brinkmann, F. Burkart, W. Hillert, M. Stanitzki, T. Vinatier

Abstract: We propose a new beam diagnostics method to reconstruct the phase space of charged particle bunches in 5 dimensions, which consist of the horizontal and vertical positions and divergences as well as the time axis. This is achieved by combining a quadrupole-based transverse phase-space tomography with the adjustable streaking angle of a polarizable X-band transverse deflection structure (PolariX TD… ▽ More We propose a new beam diagnostics method to reconstruct the phase space of charged particle bunches in 5 dimensions, which consist of the horizontal and vertical positions and divergences as well as the time axis. This is achieved by combining a quadrupole-based transverse phase-space tomography with the adjustable streaking angle of a polarizable X-band transverse deflection structure (PolariX TDS). We demonstrate with detailed simulations that the method is able to reconstruct various complex phase-space distributions and that the quality of the reconstruction depends on the number of input projections. This method allows for the identification and visualization of previously unnoticed detailed features in the phase-space distribution, and can thereby be used as a tool towards improving the performance of particle accelerators, or performing more accurate simulation studies. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Developing a Monolithic Silicon Sensor in a 65 nm CMOS Imaging Technology for Future Lepton Collider Vertex Detectors

Authors: Adriana Simancas, Justus Braach, Eric Buschmann, Ankur Chauhan, Dominik Dannheim, Manuel Del Rio Viera, Katharina Dort, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Karsten Hansen, Lennart Huth, Larissa Mendes, Budi Mulyanto, Daniil Rastorguev, Christian Reckleben, Sara Ruiz Daza, Paul Schütze, Walter Snoeys, Simon Spannagel, Marcel Stanitzki, Anastasiia Velyka, Gianpiero Vignola, Håkan Wennlöf

Abstract: Monolithic CMOS sensors in a 65 nm imaging technology are being investigated by the CERN EP Strategic R&D Programme on Technologies for Future Experiments for an application in particle physics. The appeal of monolithic detectors lies in the fact that both sensor volume and readout electronics are integrated in the same silicon wafer, providing a reduction in production effort, costs and scatterin… ▽ More Monolithic CMOS sensors in a 65 nm imaging technology are being investigated by the CERN EP Strategic R&D Programme on Technologies for Future Experiments for an application in particle physics. The appeal of monolithic detectors lies in the fact that both sensor volume and readout electronics are integrated in the same silicon wafer, providing a reduction in production effort, costs and scattering material. The Tangerine Project WP1 at DESY participates in the Strategic R&D Programme and is focused on the development of a monolithic active pixel sensor with a time and spatial resolution compatible with the requirements for a future lepton collider vertex detector. By fulfilling these requirements, the Tangerine detector is suitable as well to be used as telescope planes for the DESY-II Test Beam facility. The project comprises all aspects of sensor development, from the electronics engineering and the sensor design using simulations, to laboratory and test beam investigations of prototypes. Generic TCAD Device and Monte-Carlo simulations are used to establish an understanding of the technology and provide important insight into performance parameters of the sensor. Testing prototypes in laboratory and test beam facilities allows for the characterization of their response to different conditions. By combining results from all these studies it is possible to optimize the sensor layout. This contribution presents results from generic TCAD and Monte-Carlo simulations, and measurements performed with test chips of the first sensor submission. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Comments: 7 pages, 8 figures, submitted to IEEE Xplore as conference record for 2022 IEEE NSS/MIC/RTSD

ADENIUM -- A demonstrator for a next-generation beam telescope at DESY

Authors: Yi Liu, Changqing Feng, Ingrid-Maria Gregor, Adrian Herkert, Lennart Huth, Marcel Stanitzki, Yao Teng, Chenfei Yang

Abstract: High-resolution beam telescopes for charged particle tracking are one of the most important and equally demanding infrastructure items at test beam facilities. The main purpose of beam telescopes is to provide precise reference track information of beam particles to measure the performance of a device under test (DUT). In this report the development of the ADENIUM beam telescope (ALPIDE sensor bas… ▽ More High-resolution beam telescopes for charged particle tracking are one of the most important and equally demanding infrastructure items at test beam facilities. The main purpose of beam telescopes is to provide precise reference track information of beam particles to measure the performance of a device under test (DUT). In this report the development of the ADENIUM beam telescope (ALPIDE sensor based DESY Next test beam Instrument) as a demonstrator and prototype for a next-generation beam telescope is presented. The ADENIUM beam telescope features up to six pixelated reference planes framed by plastic scintillators for triggering. ADENIUM is capable of replacing the currently used EUDET-type beam telescopes without impacting existing DUT implementations due to the integration of the telescope DAQ into EUDAQ2. In this report the concept and design of the ADENIUM telescope as well as its performance are discussed. The telescope's pointing resolution is determined in different configurations. For an optimal setup at an momentum of 5.6 GeV with an ALPIDE as DUT, a resolution better than 3 um has been extracted. No rate limitations have been observed at the DESY II test beam. △ Less

Submitted 1 June, 2023; v1 submitted 14 January, 2023; originally announced January 2023.

Comments: 11 pages, 8 figures

Report number: PUBDB-2022-07438

TelePix -- A fast region of interest trigger and timing layer for the EUDET Telescopes

Authors: Heiko Augustin, Sebastian Dittmeier, Jan Hammerich, Adrian Herkert, Lennart Huth, David Immig, Ivan Perić, André Schöning, Adriana Simancas, Marcel Stanitzki, Benjamin Weinläder

Abstract: Test beam facilities are essential to study the response of novel detectors to particles. At the DESY II Test Beam facility, users can test their detectors with an electron beam with a momentum from 1-6 GeV. To track the beam particles, EUDET-style telescopes are provided in each beam area. They provide excellent spatial resolution, but the time resolution is limited by the rolling shutter archite… ▽ More Test beam facilities are essential to study the response of novel detectors to particles. At the DESY II Test Beam facility, users can test their detectors with an electron beam with a momentum from 1-6 GeV. To track the beam particles, EUDET-style telescopes are provided in each beam area. They provide excellent spatial resolution, but the time resolution is limited by the rolling shutter architecture to a precision of approximately 230 $μ$s. Since the demand on particle rates -- and hence track multiplicities -- is increasing timing is becoming more relevant. DESY foresees several upgrades of the telescopes. TelePix is an upgrade project to provide track timestamping with a precision of better than 5 ns and a configurable region of interest to trigger the telescope readout. Small scale prototypes have been characterised in laboratory and test beam measurements. Laboratory tests with an injection corresponding to 2300 electrons show a S/N of above 20. Test beam characterization shows efficiencies of above 99% over a threshold range of more than 100 mV and time resolutions of 2.4 ns at low noise rates. △ Less

Submitted 20 December, 2022; originally announced December 2022.

Comments: Preprint submitted to Proceedings of the 15th Pisa Meeting on Advanced Detectors

Towards a New Generation of Monolithic Active Pixel Sensors

Authors: Ankur Chauhan, Manuel Del Rio Viera, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Karsten Hansen, Lennart Huth, Larissa Mendes, Budi Mulyanto, Daniil Rastorguev, Christian Reckleben, Sara Ruiz Daza, Paul Schütze, Adriana Simancas, Simon Spannagel, Marcel Stanitzki, Anastasiia Velyka, Gianpiero Vignola, Håkan Wennlöf

Abstract: A new generation of Monolithic Active Pixel Sensors (MAPS), produced in a 65 nm CMOS imaging process, promises higher densities of on-chip circuits and, for a given pixel size, more sophisticated in-pixel logic compared to larger feature size processes. MAPS are a cost-effective alternative to hybrid pixel sensors since flip-chip bonding is not required. In addition, they allow for significant red… ▽ More A new generation of Monolithic Active Pixel Sensors (MAPS), produced in a 65 nm CMOS imaging process, promises higher densities of on-chip circuits and, for a given pixel size, more sophisticated in-pixel logic compared to larger feature size processes. MAPS are a cost-effective alternative to hybrid pixel sensors since flip-chip bonding is not required. In addition, they allow for significant reductions of the material budget of detector systems, due to the smaller physical thicknesses of the active sensor and the absence of a separate readout chip. The TANGERINE project develops a sensor suitable for future Higgs factories as well as for a beam telescope to be used at beam-test facilities. The sensors will have small collection electrodes (order of $μ$m) to maximize the signal-to-noise ratio, which makes it possible to minimize power dissipation in the circuitry. The first batch of test chips, featuring full front-end amplifiers with Krummenacher feedback, was produced and tested at the Mainzer Mikrotron (MAMI) at the end of 2021. MAMI provides an electron beam with currents up to 100 $μ$A and an energy of 855 MeV. The analog output signal of the test chips was recorded with a high bandwidth oscilloscope and used to study the charge-sensitive amplifier of the chips in terms of waveform analysis. A beam telescope was used as a reference system to allow for track-based analysis of the recorded data. △ Less

Submitted 18 October, 2022; originally announced October 2022.

Comments: 3 pages, 2 figures, presented at 15th Pisa Meeting on Advanced Detectors

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1047 (2023) 167821

Upgrading the Beam Telescopes at the DESY II Test Beam Facility

Authors: H. Augustin, R. Diener, S. Dittmeier, P. M. Freeman, J. Hammerich, A. Herkert, L. Huth, D. Immig, U. Krämer, N. Meyners, I. Perić, O. Schäfer, A. Schöning, A. Simancas, M. Stanitzki, D. Stuart, B. Weinläder

Abstract: The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stamping, with triggered… ▽ More The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stamping, with triggered readout and a readout time of > 115 $μ$s. If the highest available rates are used, multiple particles are traversing the telescopes within one readout frame, thus creating ambiguities that cannot be resolved without additional timing layers. Several upgrades are currently investigated and tested: Firstly, a fast monolithic pixel sensor, the TelePix, to provide precise track timing and triggering on a region of interest is proposed to overcome this limitation. The TelePix is a 180 nm HV-CMOS sensor that has been developed jointly by DESY, KIT and the University of Heidelberg and designed at KIT. In this publication, the performance evaluation is presented: The difference between two amplifier designs is evaluated. A high hit detection efficiency of above 99.9 % combined with a time resolution of below 4 ns at negligible pixel noise rates is determined. Finally, the digital hit output to provide region of interest triggering is evaluated and shows a short absolute delay with respect to a traditional trigger scintillator as well as an excellent time resolution. Secondly, a fast LGAD plane has been proposed to provide a time resolution of a few 10 ps, which is foreseen to drastically improve the timing performance of the telescope. Time resolutions of below 70 ps have been determined in collaboration with the University of California, Santa Barbara. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Journal ref: NIM-A 1040,167-183, 2022

The Tangerine project: Development of high-resolution 65 nm silicon MAPS

Authors: Håkan Wennlöf, Ankur Chauhan, Manuel Del Rio Viera, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Karsten Hansen, Lennart Huth, Larissa Mendes, Budi Mulyanto, Daniil Rastorguev, Christian Reckleben, Sara Ruiz Daza, Paul Schütze, Adriana Simancas, Simon Spannagel, Marcel Stanitzki, Anastasiia Velyka, Gianpiero Vignola

Abstract: The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of developing a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced… ▽ More The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of developing a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced power consumption and material budget compared to other processes. The process is envisioned to be used in for example the next ALICE inner tracker upgrade, and in experiments at the electron-ion collider. The initial goal of the three-year Tangerine project is to develop and test a sensor in a 65 nm CMOS imaging process that can be used in test beam telescopes at DESY, providing excellent spatial resolution and high time resolution, and thus demonstrating the capabilities of the process. The project covers all aspects of sensor R&D, from electronics and sensor design using simulations, to prototype test chip characterisation in labs and at test beams. The sensor design simulations are performed by using a powerful combination of detailed electric field simulations using technology computer-aided design and high-statistics Monte Carlo simulations using the Allpix Squared framework. A first prototype test chip in the process has been designed and produced, and successfully operated and tested both in labs and at test beams. △ Less

Submitted 11 June, 2022; originally announced June 2022.

Comments: 5 pages, 5 figures. Proceedings of VCI 2022: The 16th Vienna Conference on Instrumentation, submitted to Nucl. Instrum. Methods Phys. Res. A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1039C (2022) 167025

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

First design of a crystal-based extraction of 6 GeV electrons for the DESY II Booster Synchrotron

Authors: A. Sytov, G. Kube, L. Bandiera, P. Cirrone, H. Ehrlichmann, V. Guidi, V. Haurylavets, M. Romagnoni, M. Soldani, M. Stanitzki, M. Tamisari, V. Tikhomirov, K. Wittenburg, A. Mazzolari

Abstract: A proof-of-principle experimental setup for the extraction of 6 GeV electrons from the DESY II Booster Synchrotron using the channeling effect in a bent crystal is elaborated. Various aspects of the experimental setup were investigated in detail, such as the particle beam dynamics during the extraction process, the manufacturing and characterization of bent crystals, and the detection of the extra… ▽ More A proof-of-principle experimental setup for the extraction of 6 GeV electrons from the DESY II Booster Synchrotron using the channeling effect in a bent crystal is elaborated. Various aspects of the experimental setup were investigated in detail, such as the particle beam dynamics during the extraction process, the manufacturing and characterization of bent crystals, and the detection of the extracted beam. In order to optimize the crystal geometry, the overall process of beam extraction was simulated, taking into account the influence of radiation energy losses. As result it is concluded that the multi-turn electron beam extraction efficiency can reach up to 16 %. In principle this crystal-based beam extraction technique can be applied at any electron synchrotron in order to provide multi-GeV electron beams in a parasitic mode. This technique will allow to supply fixed-target experiments by intense high-quality monoenergetic electron beams. Furthermore, electron/positron crystal-based extraction from future lepton colliders may provide an access to unique experimental conditions for ultra-high energy fixed-target experiments including searches for new physics beyond the Standard Model. △ Less

Submitted 2 December, 2021; v1 submitted 19 October, 2021; originally announced October 2021.

Updating the SiD Detector concept

Authors: M. Breidenbach, J. E. Brau, P. Burrows, T. Markiewicz, M. Stanitzki, J. Strube, A. P. White

Abstract: The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momen… ▽ More The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momentum resolution. The highly granular calorimeter system is optimized for Particle Flow application to achieve very good jet energy resolution over a wide range of energies. With a potential construction date of the ILC moving closer, it is now the time to review the design and technology decision that have been made during the DBD phase and reconsider them in the light of the recent technological advances. For each area of SiD development R&D topics and opportunities for participation will be discussed. △ Less

Submitted 19 May, 2025; v1 submitted 19 October, 2021; originally announced October 2021.

Mapping the material distribution of a complex structure in an electron beam

Authors: Luise Poley, Ulf Stolzenberg, Benjamin Schwenker, Ariane Frey, Peter Göttlicher, Carlos Marinas, Marcel Stanitzki, Bernd Stelzer

Abstract: The simulation and analysis of High Energy Physics experiments require a realistic simulation of the detector material and its distribution. The challenge is to describe all active and passive parts of large scale detectors like ATLAS in terms of their size, position and material composition. The common method for estimating the radiation length by weighing individual components, adding up their c… ▽ More The simulation and analysis of High Energy Physics experiments require a realistic simulation of the detector material and its distribution. The challenge is to describe all active and passive parts of large scale detectors like ATLAS in terms of their size, position and material composition. The common method for estimating the radiation length by weighing individual components, adding up their contributions and averaging the resulting material distribution over extended structures provides a good general estimate, but can deviate significantly from the material actually present. A method has been developed to assess its material distribution with high spatial resolution using the reconstructed scattering angles and hit positions of high energy electron tracks traversing an object under investigation. The study presented here shows measurements for an extended structure with a highly inhomogeneous material distribution. The structure under investigation is an End-of-Substructure-card prototype designed for the ATLAS Inner Tracker strip tracker -- a PCB populated with components of a large range of material budgets and sizes. The measurements presented here summarise requirements for data samples and reconstructed electron tracks for reliable image reconstruction of large scale, inhomogeneous samples, choices of pixel sizes compared to the size of features under investigation as well as a bremsstrahlung correction for high material densities and thicknesses. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Journal ref: published in Journal of Instrumentation, Volume 16, January 2021

Lycoris -- a large-area, high resolution beam telescope

Authors: James Brau, Martin Breidenbach, Dietrich R. Freytag, Claus Kleinwort, Uwe Kraemer, Benjamin A. Reese, Sebastiaan Roelofs, Marcel Stanitzki, Amanda Steinhebel, Dimitra Tsionou, Mengqing Wu

Abstract: A high-resolution beam telescope is one of the most important and demanding infrastructure components at any test beam facility. Its main purpose is to provide reference particle tracks from the incoming test beam particles to the test beam users, which allows measurement of the performance of the device-under-test (DUT). \LYCORIS, a six-plane compact beam telescope with an active area of $\sim$10… ▽ More A high-resolution beam telescope is one of the most important and demanding infrastructure components at any test beam facility. Its main purpose is to provide reference particle tracks from the incoming test beam particles to the test beam users, which allows measurement of the performance of the device-under-test (DUT). \LYCORIS, a six-plane compact beam telescope with an active area of $\sim$10$\times$\SI{10}{\square\centi\metre} (extensible to 10$\times$\SI{20}{\square\centi\metre}) was installed at the \DIITBF in 2019, to provide a precise momentum measurement in a \SI{1}{\tesla} solenoid magnet or to provide tracking over a large area. The overall design of \LYCORIS will be described as well as the performance of the chosen silicon sensor. The \SI{25}{\micro\metre} pitch micro-strip sensor used for \LYCORIS was originally designed for the \SID detector concept for the International Linear Collider. It adopts a second metallization layer to route signals from strips to the bump-bonded \KPIX ASIC and uses a wire-bonded flex cable for the connection to the DAQ and the power supply system. This arrangement eliminates the need for a dedicated hybrid PCB. Its performance was tested for the first time in this project. The system has been evaluated at the \DIITBF in several test-beam campaigns and has demonstrated an average single-point resolution of \SI{7.07}{\micro\meter}. △ Less

Submitted 28 May, 2021; v1 submitted 21 December, 2020; originally announced December 2020.

Comments: 43 pages, 37 figures

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

Authors: Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch , et al. (224 additional authors not shown)

Abstract: For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000… ▽ More For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 82 pages, 66 figures

Journal ref: published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020

Performance of Julia for High Energy Physics Analyses

Authors: Marcel Stanitzki, Jan Strube

Abstract: We argue that the Julia programming language is a compelling alternative to implementations in Python and C++ for common data analysis workflows in high energy physics. We compare the speed of implementations of different workflows in Julia with those in Python and C++. Our studies show that the Julia implementations are competitive for tasks that are dominated by computational load rather than da… ▽ More We argue that the Julia programming language is a compelling alternative to implementations in Python and C++ for common data analysis workflows in high energy physics. We compare the speed of implementations of different workflows in Julia with those in Python and C++. Our studies show that the Julia implementations are competitive for tasks that are dominated by computational load rather than data access. For work that is dominated by data access, we demonstrate an application with concurrent file reading and parallel data processing. △ Less

Submitted 12 January, 2021; v1 submitted 24 March, 2020; originally announced March 2020.

Comments: 16 pages, 4 pages, 1 table, 3 code listings

Report number: PNNL-SA-151985 DESY 20-056

Journal ref: Computing and Software for Big Science (2021) 5:10

EUDAQ $-$ A Data Acquisition Software Framework for Common Beam Telescopes

Authors: P. Ahlburg, S. Arfaoui, J. -H. Arling, H. Augustin, D. Barney, M. Benoit, T. Bisanz, E. Corrin, D. Cussans, D. Dannheim, J. Dreyling-Eschweiler, T. Eichhorn, A. Fiergolski, I. -M. Gregor, J. Grosse-Knetter, D. Haas, L. Huth, A. Irles, H. Jansen, J. Janssen, M. Keil, J. S. Keller, M. Kiehn, H. J. Kim, J. Kroll , et al. (32 additional authors not shown)

Abstract: EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed… ▽ More EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications. △ Less

Submitted 18 November, 2019; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: 32 pages, 11 figures

EUDAQ2 -- A Flexible Data Acquisition Software Framework for Common Test Beams

Authors: Y. Liu, M. S. Amjad, P. Baesso, D. Cussans, J. Dreyling-Eschweiler, R. Ete, I. Gregor, L. Huth, A. Irles, H. Jansen, K. Krueger, J. Kvasnicka, R. Peschke, E. Rossi, A. Rummler, F. Sefkow, M. Stanitzki, M. Wing, M. Wu

Abstract: The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types… ▽ More The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types, ranging from tracking detectors to calorimeters. EUDAQ2 is suited as an overarching software that links individual detector readout systems and simplifies the integration of multiple detectors. The framework itself supports several triggering and event building modes. This flexibility makes test beams with multiple detectors significantly easier and more efficient, as EUDAQ2 can adapt to the characteristics of each detector prototype during testing. The system has been thoroughly tested during multiple test beams involving different detector prototypes. EUDAQ2 has now been released and is freely available under an open-source license. △ Less

Submitted 4 September, 2019; v1 submitted 23 July, 2019; originally announced July 2019.

Comments: 17 pages, 6 figures

The International Linear Collider. A Global Project

Authors: Hiroaki Aihara, Jonathan Bagger, Philip Bambade, Barry Barish, Ties Behnke, Alain Bellerive, Mikael Berggren, James Brau, Martin Breidenbach, Ivanka Bozovic-Jelisavcic, Philip Burrows, Massimo Caccia, Paul Colas, Dmitri Denisov, Gerald Eigen, Lyn Evans, Angeles Faus-Golfe, Brian Foster, Keisuke Fujii, Juan Fuster, Frank Gaede, Jie Gao, Paul Grannis, Christophe Grojean, Andrew Hutton , et al. (37 additional authors not shown)

Abstract: A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal… ▽ More A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years. △ Less

Submitted 28 January, 2019; originally announced January 2019.

The International Linear Collider. A European Perspective

Authors: Philip Bambade, Ties Behnke, Mikael Berggren, Ivanka Bozovic-Jelisavcic, Philip Burrows, Massimo Caccia, Paul Colas, Gerald Eigen, Lyn Evans, Angeles Faus-Golfe, Brian Foster, Juan Fuster, Frank Gaede, Christophe Grojean, Marek Idzik, Andrea Jeremie, Tadeusz Lesiak, Aharon Levy, Benno List, Jenny List, Joachim Mnich, Olivier Napoly, Carlo Pagani, Roman Poeschl, Francois Richard , et al. (9 additional authors not shown)

Abstract: The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-prec… ▽ More The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-precision and model-independent determinations of its parameters. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. The use of polarised electron and positron beams opens new capabilities and scenarios that add to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The international -- including European -- interest for the project is very strong. Europe has participated in the ILC project since its early conception and plays a major role in its present development covering most of its scientific and technological aspects: physics studies, accelerator and detectors. The potential for a wide participation of European groups and laboratories is thus high, including important opportunities for European industry. Following decades of technical development, R&D, and design optimisation, the project is ready for construction and the European particle physics community, technological centers and industry are prepared to participate in this challenging endeavour. △ Less

Submitted 28 January, 2019; originally announced January 2019.

The DESY II Test Beam Facility

Authors: Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Ingrid-Maria Gregor, Ulrich Kötz, Uwe Krämer, Norbert Meyners, Natalia Potylitsina-Kube, Anne Schütz, Paul Schütze, Marcel Stanitzki

Abstract: DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed… ▽ More DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed high-precision pixel beam telescopes. This publication gives a detailed description of the facility, the available infrastructure, and the simulated and measured performance. △ Less

Submitted 26 October, 2018; v1 submitted 24 July, 2018; originally announced July 2018.

Comments: 63 pages, 67 figures

Report number: DESY 18-111

Summary and Conclusions of the First DESY Test Beam User Workshop

Authors: Jan-Hendrik Arling, M. Sohail Amjad, Laura Bandiera, Ties Behnke, Dominik Dannheim, Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Andreas Gerbershagen, Ingrid-Maria Gregor, Avetik Hayrapetyan, Hendrik Jansen, Jochen Kaminski, Jiri Kroll, Paolo Martinengo, Norbert Meyners, Christian Müntz, Luise Poley, Benjamin Schwenker, Marcel Stanitzki

Abstract: On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcomi… ▽ More On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcoming years and a first estimate of their needs for beam time in the long-term future beyond 2025. A special focus was also on additional improvements to the facility beyond its current capabilities. △ Less

Submitted 15 May, 2018; v1 submitted 1 February, 2018; originally announced February 2018.

Report number: DESY 18-019

LYCORIS - A Large Area Strip Telescope

Authors: Uwe Kraemer, Dimitra Tsionou, Marcel Stanitzki, Mengqing Wu

Abstract: The LYCORIS Large Area Silicon Strip Telescope for the DESY II Test Beam Facility is presented. The DESY II Test Beam Facility provides elec- tron and positron beams for beam tests of up to 6 GeV. A new telescope with a large 10x20 cm$^2$ coverage area based on a 25 μm pitch strip sensor is to be installed within the PCMAG 1 T solenoid. The current state of the system is presented. The LYCORIS Large Area Silicon Strip Telescope for the DESY II Test Beam Facility is presented. The DESY II Test Beam Facility provides elec- tron and positron beams for beam tests of up to 6 GeV. A new telescope with a large 10x20 cm$^2$ coverage area based on a 25 μm pitch strip sensor is to be installed within the PCMAG 1 T solenoid. The current state of the system is presented. △ Less

Submitted 25 January, 2018; originally announced January 2018.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS2017), Strasbourg, France, 23-27 October 2017. C17-10-23.2

A Study of the Impact of High Cross Section ILC Processes on the SiD Detector Design

Authors: Timothy Barklow, Luc d`Hautuille, Christopher Milke, Bruce Schumm, Anne Schütz, Marcel Stanitzki, Jan Strube

Abstract: The SiD concept is one of two proposed detectors to be mounted at the interaction region of the International Linear Collider (ILC). A substantial ILC background arises from low transverse momentum $\mathrm{e}^{+}\mathrm{e}^{-}$ pairs created by the interaction of the colliding beams' electromagnetic fields. In order to provide hermeticity and sensitivity to beam targeting parameters, a forward Be… ▽ More The SiD concept is one of two proposed detectors to be mounted at the interaction region of the International Linear Collider (ILC). A substantial ILC background arises from low transverse momentum $\mathrm{e}^{+}\mathrm{e}^{-}$ pairs created by the interaction of the colliding beams' electromagnetic fields. In order to provide hermeticity and sensitivity to beam targeting parameters, a forward Beamline Calorimeter (BeamCal) is being designed that will provide coverage down to 5 mrad from the outgoing beam trajectory, and intercept the majority of this pair background. Using the SiD simulation framework, the effect of this pair background on the SiD detector components, especially the vertex detector (VXD) and forward electromagnetic calorimeter (FCAL), is explored. In the case of the FCAL, backgrounds from Bhabha and two-photon processes are also considered. The consequence of several variants of the BeamCal geometry and ILC interaction region configuration are considered for both the vertex detector and BeamCal performance. △ Less

Submitted 25 September, 2016; originally announced September 2016.

Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC

Authors: C. Barth, C. A. Betancourt, I. Bloch, F. Bögelspacher, W. de Boer, M. Daniels, A. Dierlamm, R. Eber, G. Eckerlin, D. Eckstein, T. Eichhorn, J. Erfle, L. Feld, E. Garutti, I. -M. Gregor, M. Guthoff, F. Hartmann, M. Hauser, U. Husemann, K. Jakobs, A. Junkes, W. Karpinski, K. Klein, S. Kuehn, H. Lacker , et al. (16 additional authors not shown)

Abstract: While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an env… ▽ More While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative "Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was supported by the Helmholtz Alliance "Physics at the Terascale" during the years 2013 and 2014. The aim of the project was to share experience and to work together on key areas of mutual interest during the R&D phase of these upgrades. The project concentrated on five areas, namely exchange of experience, radiation hardness of silicon sensors, low mass system design, automated precision assembly procedures, and irradiations. This report summarizes the main achievements. △ Less

Submitted 28 April, 2016; originally announced April 2016.

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier

Authors: M. Demarteau, R. Lipton, H. Nicholson, I. Shipsey, D. Akerib, A. Albayrak-Yetkin, J. Alexander, J. Anderson, M. Artuso, D. Asner, R. Ball, M. Battaglia, C. Bebek, J. Beene, Y. Benhammou, E. Bentefour, M. Bergevin, A. Bernstein, B. Bilki, E. Blucher, G. Bolla, D. Bortoletto, N. Bowden, G. Brooijmans, K. Byrum , et al. (189 additional authors not shown)

Abstract: These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss… ▽ More These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 50 pages

The International Linear Collider Technical Design Report - Volume 4: Detectors

Authors: Ties Behnke, James E. Brau, Philip N. Burrows, Juan Fuster, Michael Peskin, Marcel Stanitzki, Yasuhiro Sugimoto, Sakue Yamada, Hitoshi Yamamoto

Abstract: The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the… ▽ More The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe. △ Less

Submitted 26 June, 2013; originally announced June 2013.

Comments: See also http://www.linearcollider.org/ILC/TDR . The full list of signatories is inside the Report

Report number: ILC-REPORT-2013-040; ANL-HEP-TR-13-20; BNL-100603-2013-IR; IRFU-13-59; CERN-ATS-2013-037; Cockcroft-13-10; CLNS 13/2085; DESY 13-062; FERMILAB TM-2554; IHEP-AC-ILC-2013-001; INFN-13-04/LNF; JAI-2013-001; JINR E9-2013-35; JLAB-R-2013-01; KEK Report 2013-1; KNU/CHEP-ILC-2013-1; LLNL-TR-635539; SLAC-R-1004; ILC-HiGrade-Report-2013-003

The International Linear Collider Technical Design Report - Volume 1: Executive Summary

Authors: Ties Behnke, James E. Brau, Brian Foster, Juan Fuster, Mike Harrison, James McEwan Paterson, Michael Peskin, Marcel Stanitzki, Nicholas Walker, Hitoshi Yamamoto

Abstract: The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the… ▽ More The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe. △ Less

Submitted 26 June, 2013; originally announced June 2013.

Comments: See also http://www.linearcollider.org/ILC/TDR . The full list of contributing institutes is inside the Report

Report number: ILC-REPORT-2013-040; ANL-HEP-TR-13-20; BNL-100603-2013-IR; IRFU-13-59; CERN-ATS-2013-037; Cockcroft-13-10; CLNS 13/2085; DESY 13-062; FERMILAB TM-2554; IHEP-AC-ILC-2013-001; INFN-13-04/LNF; JAI-2013-001; JINR E9-2013-35; JLAB-R-2013-01; KEK Report 2013-1; KNU/CHEP-ILC-2013-1; LLNL-TR-635539; SLAC-R-1004; ILC-HiGrade-Report-2013-003

Operational experience, improvements, and performance of the CDF Run II silicon vertex detector

Authors: T. Aaltonen, S. Behari, A. Boveia, B. Brau, G. Bolla, D. Bortoletto, C. Calancha, S. Carron, S. Cihangir, M. Corbo, D. Clark, B. Di Ruzza, R. Eusebi, J. P. Fernandez, J. C. Freeman, J. E. Garcia, M. Garcia-Sciveres, D. Glenzinski, O. Gonzalez, S. Grinstein, M. Hartz, M. Herndon, C. Hill, A. Hocker, U. Husemann , et al. (35 additional authors not shown)

Abstract: The Collider Detector at Fermilab (CDF) pursues a broad physics program at Fermilab's Tevatron collider. Between Run II commissioning in early 2001 and the end of operations in September 2011, the Tevatron delivered 12 fb-1 of integrated luminosity of p-pbar collisions at sqrt(s)=1.96 TeV. Many physics analyses undertaken by CDF require heavy flavor tagging with large charged particle tracking acc… ▽ More The Collider Detector at Fermilab (CDF) pursues a broad physics program at Fermilab's Tevatron collider. Between Run II commissioning in early 2001 and the end of operations in September 2011, the Tevatron delivered 12 fb-1 of integrated luminosity of p-pbar collisions at sqrt(s)=1.96 TeV. Many physics analyses undertaken by CDF require heavy flavor tagging with large charged particle tracking acceptance. To realize these goals, in 2001 CDF installed eight layers of silicon microstrip detectors around its interaction region. These detectors were designed for 2--5 years of operation, radiation doses up to 2 Mrad (0.02 Gy), and were expected to be replaced in 2004. The sensors were not replaced, and the Tevatron run was extended for several years beyond its design, exposing the sensors and electronics to much higher radiation doses than anticipated. In this paper we describe the operational challenges encountered over the past 10 years of running the CDF silicon detectors, the preventive measures undertaken, and the improvements made along the way to ensure their optimal performance for collecting high quality physics data. In addition, we describe the quantities and methods used to monitor radiation damage in the sensors for optimal performance and summarize the detector performance quantities important to CDF's physics program, including vertex resolution, heavy flavor tagging, and silicon vertex trigger performance. △ Less

Submitted 3 October, 2013; v1 submitted 14 January, 2013; originally announced January 2013.

Comments: Preprint accepted for publication in Nuclear Instruments and Methods A (07/31/2013)

Report number: FERMILAB-PUB-13-015-E

Journal ref: Nuclear Instruments and Methods in Physics Research, A 729 (2013) 153-181

Physics and Detectors at CLIC: CLIC Conceptual Design Report

Authors: Lucie Linssen, Akiya Miyamoto, Marcel Stanitzki, Harry Weerts

Abstract: This report describes the physics potential and experiments at a future multi-TeV e+e- collider based on the Compact Linear Collider (CLIC) technology. The physics scenarios considered include precision measurements of known quantities as well as the discovery potential of physics beyond the Standard Model. The report describes the detector performance required at CLIC, taking into account the i… ▽ More This report describes the physics potential and experiments at a future multi-TeV e+e- collider based on the Compact Linear Collider (CLIC) technology. The physics scenarios considered include precision measurements of known quantities as well as the discovery potential of physics beyond the Standard Model. The report describes the detector performance required at CLIC, taking into account the interaction point environment and especially beaminduced backgrounds. Two detector concepts, designed around highly granular calorimeters and based on concepts studied for the International Linear Collider (ILC), are described and used to study the physics reach and potential of such a collider. Detector subsystems and the principal engineering challenges are illustrated. The overall performance of these CLIC detector concepts is demonstrated by studies of the performance of individual subdetector systems as well as complete simulation studies of six benchmark physics processes. These full detector simulation and reconstruction studies include beaminduced backgrounds and physics background processes. After optimisation of the detector concepts and adopting the reconstruction algorithms the results show very efficient background rejection and clearly demonstrate the physics potential at CLIC in terms of precision mass and cross section measurements. Finally, an overview of future plans of the CLIC detector and physics study is given and a list of key detector R&D topics needed for detectors at CLIC is presented. △ Less

Submitted 27 February, 2012; originally announced February 2012.

Comments: 257 p, published as CERN Yellow Report CERN-2012-003

Report number: CERN-2012-003 ; ANL-HEP-TR-12-01 ; DESY-12-008 ; KEK-Report-2011-7

Design and performance of a CMOS study sensor for a binary readout electromagnetic calorimeter

Authors: J. A. Ballin, R. Coath, J. P. Crooks, P. D. Dauncey, A. -M. Magnan, Y. Mikami, O. D. Miller, M. Noy, V. Rajovic, M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani, N. K. Watson, J. A. Wilson, Z. Zhang

Abstract: We present a study of a CMOS test sensor which has been designed, fabricated and characterised to investigate the parameters required for a binary readout electromagnetic calorimeter. The sensors were fabricated with several enhancements in addition to standard CMOS processing. Detailed simulations and experimental results of the performance of the sensor are presented. The sensor and pixels are s… ▽ More We present a study of a CMOS test sensor which has been designed, fabricated and characterised to investigate the parameters required for a binary readout electromagnetic calorimeter. The sensors were fabricated with several enhancements in addition to standard CMOS processing. Detailed simulations and experimental results of the performance of the sensor are presented. The sensor and pixels are shown to behave in accordance with expectations and the processing enhancements are found to be essential to achieve the performance required. △ Less

Submitted 4 May, 2011; v1 submitted 22 March, 2011; originally announced March 2011.

Comments: Submitted to J.Inst

Journal ref: J.Inst 6 (2011) P05009

Design Study for a SuperB Pixel Vertex Detector

Authors: A. Bevan, J. Crooks, A. Lintern, A. Nichols, M. Stanitzki, R. Turchetta, F. F. Wilson

Abstract: We present a conceptual design for a low-mass, all pixel vertex detector using the CMOS quadruple well INMAPS process, capable of working in the very high luminosities exceeding 10^36 /cm^2 /sec that can be expected at the next generation e+e- B factories. We concentrate on the vertexing requirements necessary for time-dependent measurements that are also relevant to searches for new physics beyon… ▽ More We present a conceptual design for a low-mass, all pixel vertex detector using the CMOS quadruple well INMAPS process, capable of working in the very high luminosities exceeding 10^36 /cm^2 /sec that can be expected at the next generation e+e- B factories. We concentrate on the vertexing requirements necessary for time-dependent measurements that are also relevant to searches for new physics beyond the Standard Model. We investigate different configurations and compare with the baseline designs for the SuperB and BaBar experiments. △ Less

Submitted 11 August, 2010; originally announced August 2010.

Comments: 8 pages and 8 figures, submitted to NIM

Detector Optimization for SiD using PFA

Authors: Marcel Stanitzki

Abstract: A summary of the optimization of the SiD detector is given. To optimize its performance in terms of Particle Flow Algorithms (PFA), five basic detector parameters have been varied and the impact on the obtained energy resolution using Particle Flow Algorithms has been studied using di-jets events. Finally the optimized detector used for the Letter of Intent (LoI) is briefly summarized as a resul… ▽ More A summary of the optimization of the SiD detector is given. To optimize its performance in terms of Particle Flow Algorithms (PFA), five basic detector parameters have been varied and the impact on the obtained energy resolution using Particle Flow Algorithms has been studied using di-jets events. Finally the optimized detector used for the Letter of Intent (LoI) is briefly summarized as a result from these studies. △ Less

Submitted 18 February, 2009; originally announced February 2009.

A digital ECAL based on MAPS

Authors: J. A. Ballin, P. D. Dauncey, A. -M. Magnan, M. Noy, Y. Mikami, O. Miller, V. Rajovic, N. K. Watson, J. A. Wilson, J. P. Crooks, M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani

Abstract: Progress is reported on the development and testing of Monolithic Active Pixel Sensors (MAPS) for a Si-W ECAL for the ILC. Using laser and source setups, a first version of the sensor has been characterised through measurements of the absolute gain calibration, noise and pedestal. The pixel-to-pixel gain spread is 10%. Charge diffusion has been measured and found to be compatible with simulation… ▽ More Progress is reported on the development and testing of Monolithic Active Pixel Sensors (MAPS) for a Si-W ECAL for the ILC. Using laser and source setups, a first version of the sensor has been characterised through measurements of the absolute gain calibration, noise and pedestal. The pixel-to-pixel gain spread is 10%. Charge diffusion has been measured and found to be compatible with simulation results. The charge collected by a single pixel varies from 50% to 20% depending on where it is generated. After adding detector effects to the Geant4 simulation of an ILC-like ECAL, using the measured parameters, the energy resolution is found to be 35% higher than the ideal resolution, but is still lower than the resolution obtained for an equivalent analogue ECAL. △ Less

Submitted 28 January, 2009; originally announced January 2009.

Comments: 4 pages, 5 figures, to appear in the proceedings of the LCWS08 conference

Monolithic Active Pixel Sensors (MAPS) in a quadruple well technology for nearly 100% fill factor and full CMOS pixels

Authors: J. A. Ballin, J. P. Crooks, P. D. Dauncey, A. -M. Magnan, Y. Mikami, O. D. Miller, M. Noy, V. Rajovic, M. M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani, N. K. Watson, J. A. Wilson

Abstract: In this paper we present a novel, quadruple well process developed in a modern 0.18mu CMOS technology called INMAPS. On top of the standard process, we have added a deep P implant that can be used to form a deep P-well and provide screening of N-wells from the P-doped epitaxial layer. This prevents the collection of radiation-induced charge by unrelated N-wells, typically ones where PMOS transis… ▽ More In this paper we present a novel, quadruple well process developed in a modern 0.18mu CMOS technology called INMAPS. On top of the standard process, we have added a deep P implant that can be used to form a deep P-well and provide screening of N-wells from the P-doped epitaxial layer. This prevents the collection of radiation-induced charge by unrelated N-wells, typically ones where PMOS transistors are integrated. The design of a sensor specifically tailored to a particle physics experiment is presented, where each 50mu pixel has over 150 PMOS and NMOS transistors. The sensor has been fabricated in the INMAPS process and first experimental evidence of the effectiveness of this process on charge collection is presented, showing a significant improvement in efficiency. △ Less

Submitted 18 July, 2008; originally announced July 2008.

Comments: 15 pages, 10 figures, submitted to "Sensors"

A MAPS-based Digital Electromagnetic Calorimeter for the ILC

Authors: J. A. Ballin, P. D. Dauncey, A. -M. Magnan, M. Noy, Y. Mikami, O. Miller, V. Rajović, N. K. Watson, J. A. Wilson, J. P. Crooks, M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani

Abstract: A novel design for a silicon-tungsten electromagnetic calorimeter is described, based on Monolithic Active Pixel Sensors (MAPS). A test sensor with a pixel size of 50x50 um2 has been fabricated in July 2007. The simulation of the physical sensor is done using a detailed three-dimensional charge spread algorithm. Physics studies of the sensor are done including a digitisation algorithm taking int… ▽ More A novel design for a silicon-tungsten electromagnetic calorimeter is described, based on Monolithic Active Pixel Sensors (MAPS). A test sensor with a pixel size of 50x50 um2 has been fabricated in July 2007. The simulation of the physical sensor is done using a detailed three-dimensional charge spread algorithm. Physics studies of the sensor are done including a digitisation algorithm taking into account the charge sharing, charge collection efficiency, noise, and dead areas. The influence of the charge sharing effect is found to be important and hence needs to be measured precisely. △ Less

Submitted 10 September, 2007; originally announced September 2007.

Comments: 4 pages, 4 figures. Talk presented at LCWS07