Showing 1–6 of 6 results for author: Spies, M

Correlated and in-situ electrical transmission electron microscopy studies and related membrane fabrication

Authors: Maria Spies, Zahra Sadre-Momtaz, Jonas Lähnemann, Minh Anh Luong, Bruno Fernandez, Thierry Fournier, Eva Monroy, Martien I. den Hertog

Abstract: Understanding the interplay between the structure, composition and opto-electronic properties of semiconductor nano-objects requires combining transmission electron microscopy (TEM) based techniques with electrical and optical measurements on the very same specimen. Recent developments in TEM technologies allow not only the identification and in-situ electrical characterization of a particular obj… ▽ More Understanding the interplay between the structure, composition and opto-electronic properties of semiconductor nano-objects requires combining transmission electron microscopy (TEM) based techniques with electrical and optical measurements on the very same specimen. Recent developments in TEM technologies allow not only the identification and in-situ electrical characterization of a particular object, but also the direct visualization of its modification in-situ by techniques such as Joule heating. Over the past years, we have carried out a number of studies in these fields that are reviewed in this contribution. In particular, we discuss here i) correlated studies where the same unique object is characterized electro-optically and by TEM, ii) in-situ Joule heating studies where a solid-state metal-semiconductor reaction is monitored in the TEM, and iii) in-situ biasing studies to better understand the electrical properties of contacted single nanowires. In addition, we provide detailed fabrication steps for the silicon nitride membranes crucial to these correlated and in-situ measurements. △ Less

Submitted 2 December, 2021; v1 submitted 24 January, 2020; originally announced January 2020.

Comments: This is an author-created, un-copyedited version of a topical review published in Nanotechnology. IOP Publishing Ltd. is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1361-6528/ab99f0

Journal ref: Nanotechnology 31, 472001 (2020)

In-situ high resolution TEM observation of Aluminum solid-state diffusion in Germanium nanowires: fabricating sub-10 nm Ge quantum dots

Authors: M. Luong, E. Robin, N. Pauc, P. Gentile, M. Sistani, A. Lugstein, M Spies, B Fernandez, M. den Hertog

Abstract: Aluminum-germanium nanowires (NWs) thermal activated solid state reaction is a promising system as very sharp and well defined one dimensional contacts can be created between a metal and a semiconductor, that can become a quantum dot if the size becomes sufficiently small. In the search for high performance devices without variability, it is of high interest to allow deterministic fabrication of n… ▽ More Aluminum-germanium nanowires (NWs) thermal activated solid state reaction is a promising system as very sharp and well defined one dimensional contacts can be created between a metal and a semiconductor, that can become a quantum dot if the size becomes sufficiently small. In the search for high performance devices without variability, it is of high interest to allow deterministic fabrication of nanowire quantum dots, avoiding sample variability and obtaining atomic scale precision on the fabricated dot size. In this paper, we present a reliable fabrication process to produce sub-10 nm Ge quantum dots (QDs), using a combination of ex-situ thermal annealing via rapid thermal annealing (RTA) and in-situ Joule heating technique in a transmission electron microscope (TEM). First we present in-situ direct joule heating experiments showing how the heating electrode could be damaged due to the formation of Al crystals and voids at the vicinity of the metal/NW contact, likely related with electro-migration phenomena. We show that the contact quality can be preserved by including an additional ex-situ RTA step prior to the in-situ heating. The in-situ observations also show in real-time how the exchange reaction initiates simultaneously from several locations underneath the Al contact pad, and the Al crystal grows gradually inside the initial Ge NW with the growth interface along a Ge(111) lattice plane. Once the reaction front moves out from underneath the contact metal, two factors jeopardize an atomically accurate control of the Al/Ge reaction interface. We observed a local acceleration of the reaction interface due to the electron beam irradiation in the transmission electron microscope as well as the appearance of large jumps of the interface in unpassivated Ge wires while a smooth advancement of the reaction interface was observed in wires with an Al2O3 protecting shell on the surface. Carefully controlling all aspects of the exchange reaction, we demonstrate a fabrication process combining ex-situ and in-situ heating techniques to precisely control and produce axial Al/Ge/Al NW heterostructures with an ultra-short Ge segment down to 8 nanometers. Practically, the scaling down of Ge segment length is only limited by the microscope resolution. △ Less

Submitted 24 January, 2020; originally announced January 2020.

Effect of the nanowire diameter on the linearity of the response of GaN-based heterostructured nanowire photodetectors

Authors: Maria Spies, Jakub Polaczyński, Akhil Ajay, Dipankar Kalita, Jonas Lähnemann, Bruno Gayral, Martien I. den Hertog, Eva Monroy

Abstract: Nanowire photodetectors are investigated because of their compatibility with flexible electronics, or for the implementation of on-chip optical interconnects. Such devices are characterized by ultrahigh photocurrent gain, but their photoresponse scales sublinearly with the optical power. Here, we present a study of single-nanowire photodetectors displaying a linear response to ultraviolet illumina… ▽ More Nanowire photodetectors are investigated because of their compatibility with flexible electronics, or for the implementation of on-chip optical interconnects. Such devices are characterized by ultrahigh photocurrent gain, but their photoresponse scales sublinearly with the optical power. Here, we present a study of single-nanowire photodetectors displaying a linear response to ultraviolet illumination. Their structure consists of a GaN nanowire incorporating an AlN/GaN/AlN heterostructure, which generates an internal electric field. The activity of the heterostructure is confirmed by the rectifying behavior of the current-voltage characteristics in the dark, as well as by the asymmetry of the photoresponse in magnitude and linearity. Under reverse bias (negative bias on the GaN cap segment), the detectors behave linearly with the impinging optical power when the nanowire diameter is below a certain threshold ($\approx$ 80 nm), which corresponds to the total depletion of the nanowire stem due to the Fermi level pinning at the sidewalls. In the case of nanowires that are only partially depleted, their nonlinearity is explained by a nonlinear variation of the diameter of their central conducting channel under illumination. △ Less

Submitted 29 April, 2019; originally announced April 2019.

Comments: This is the accepted manuscript version of an article that appeared in Nanotechnology. The CC BY-NC-ND 3.0 license applies, see https://creativecommons.org/licences/by-nc-nd/3.0

Journal ref: Nanotechnology 29, 255204 (2018)

Nanowire photodetectors based on wurtzite semiconductor heterostructures

Authors: Maria Spies, Eva Monroy

Abstract: Using nanowires for photodetection constitutes an opportunity to enhance the absorption efficiency while reducing the electrical cross-section of the device. They present interesting features like compatibility with silicon substrates, which offers the possibility of integrating detector and readout circuitry, and facilitates their transfer to flexible substrates. Within a nanowire, it is possible… ▽ More Using nanowires for photodetection constitutes an opportunity to enhance the absorption efficiency while reducing the electrical cross-section of the device. They present interesting features like compatibility with silicon substrates, which offers the possibility of integrating detector and readout circuitry, and facilitates their transfer to flexible substrates. Within a nanowire, it is possible to implement axial and radial (core-shell) heterostructures. These two types can be combined to obtain three-dimensional carrier confinement (dot-in-a-wire). The incorporation of heterostructures in nanowire photodetectors opens interesting opportunities of application and performance improvement. Heterojunctions or type-II heterostructures favor the separation of the photogenerated electrons and holes, and the implementation of quantum dots in a nanowire can be applied to the development of quantum photodetectors. This paper provides a general review of latest progresses in nanowire photodetectors, including single nanowires and heterostructured nanowires. △ Less

Submitted 27 April, 2019; originally announced April 2019.

Journal ref: Semicond. Sci. Technol. 34 053002 (2019)

Bias-controlled spectral response in GaN/AlN single-nanowire ultraviolet photodetectors

Authors: Maria Spies, Martien I. Den Hertog, Pascal Hille, Jörg Schörmann, Jakub Polaczyński, Bruno Gayral, Martin Eickhoff, Eva Monroy, Jonas Lähnemann

Abstract: We present a study of GaN single-nanowire ultraviolet photodetectors with an embedded GaN/AlN superlattice. The heterostructure dimensions and doping profile were designed in such a way that the application of positive or negative bias leads to an enhancement of the collection of photogenerated carriers from the GaN/AlN superlattice or from the GaN base, respectively, as confirmed by electron beam… ▽ More We present a study of GaN single-nanowire ultraviolet photodetectors with an embedded GaN/AlN superlattice. The heterostructure dimensions and doping profile were designed in such a way that the application of positive or negative bias leads to an enhancement of the collection of photogenerated carriers from the GaN/AlN superlattice or from the GaN base, respectively, as confirmed by electron beam-induced current measurements. The devices display enhanced response in the ultraviolet A ($\approx$ 330-360 nm) / B ($\approx$ 280-330 nm) spectral windows under positive/negative bias. The result is explained by correlation of the photocurrent measurements with scanning transmission electron microscopy observations of the same single nanowire, and semi-classical simulations of the strain and band structure in one and three dimensions. △ Less

Submitted 27 October, 2017; originally announced December 2017.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters (2017), copyright (C) American Chemical Society after peer review. To access the final edited and published work see http://doi.org/10.1021/acs.nanolett.7b01118

Journal ref: Nano Letters 17 (7), 4231-4239 (2017)

Characterizing the development of sectoral Gross Domestic Product composition

Authors: Raphael Lutz, Michael Spies, Dominik E. Reusser, Jürgen P. Kropp, Diego Rybski

Abstract: We consider the sectoral composition of a country's GDP, i.e. the partitioning into agrarian, industrial, and service sectors. Exploring a simple system of differential equations we characterize the transfer of GDP shares between the sectors in the course of economic development. The model fits for the majority of countries providing 4 country-specific parameters. Relating the agrarian with the in… ▽ More We consider the sectoral composition of a country's GDP, i.e. the partitioning into agrarian, industrial, and service sectors. Exploring a simple system of differential equations we characterize the transfer of GDP shares between the sectors in the course of economic development. The model fits for the majority of countries providing 4 country-specific parameters. Relating the agrarian with the industrial sector, a data collapse over all countries and all years supports the applicability of our approach. Depending on the parameter ranges, country development exhibits different transfer properties. Most countries follow 3 of 8 characteristic paths. The types are not random but show distinct geographic and development patterns. △ Less

Submitted 7 June, 2013; v1 submitted 11 October, 2012; originally announced October 2012.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. E 88, 012804 (2013)